Aline Bel-Brunon
6
Documents
Identifiants chercheurs
- abrunon
- IdRef : 161183069
- 0000-0002-2398-9064
Présentation
### Assistant professor
University of Lyon, France
Institut National des Sciences Appliquées de Lyon (INSA Lyon)
Contact and Structural Mechanics Laboratory (LaMCoS - CNRS UMR5259)
<http://lamcos.insa-lyon.fr/>
Teams: [MIMESIS](https://lamcos.insa-lyon.fr/presentation_1.php?L=1) (Multiscale Mechanics for Solids) and [MecaLIpS](https://lamcos.insa-lyon.fr/presentation_40.php?L=1) (Mechanics, Lipidomic and Engineering for Health)
####
#### Research topics
Soft tissue biomechanics: experimentation and modeling
- simulation of wave propagation into soft tissues for a better post-processing of elastography measurements;
- development of experimental set-ups for the mechanical characterization of soft tissues in-vitro (e.g. respiratory tissues).
Simulation of cardiovascular surgery for a better planning:
- simulation of tools navigation in endovascular surgery: estimation of vascular deformations, evaluation of the risk of complications;
- simulation of lower-extremity arteries angioplasty
####
#### Resume
[PhD](http://www.theses.fr/2011ISAL0105) in Liver tissues Biomechanics in LaMCoS and [LBMC,](https://www.lbmc.ifsttar.fr/) defended in 2011
Post-doc in Respiratory tissue Biomechanics in [LNM](https://www.mw.tum.de/lnm/home/) (Munich), 2011-2013
Lecturer in Mechanical Design since 2013, in Biomechanics since 2018.
####
#### Contact
INSA Lyon - LaMCoS
Bât. Sophie Germain
Campus LyonTech-La Doua
27bis avenue Jean Capelle
F69621 Villeurbanne Cedex
Tel: +33 4 72 43 63 68
[aline.bel-brunon@insa-lyon.fr](mailto:sebastien.baguet@insa-lyon.fr)
Publications
- 6
- 4
- 4
- 3
- 3
- 2
- 2
- 2
- 2
- 2
- 2
- 2
- 2
- 1
- 1
- 1
- 1
|
Patient-specific finite element simulation of peripheral artery percutaneous transluminal angioplasty to evaluate the procedure outcome without stent implantationInternational Journal for Numerical Methods in Biomedical Engineering, 2023, 39 (3), pp.e3685. ⟨10.1002/cnm.3685⟩
Article dans une revue
hal-03970255v1
|
|
Influence of balloon design, plaque material composition, and balloon sizing on acute post angioplasty outcomes: An implicit finite element analysisInternational Journal for Numerical Methods in Biomedical Engineering, 2021, 37 (8), pp.e03499. ⟨10.1002/cnm.3499⟩
Article dans une revue
hal-03268327v1
|
Finite element simulation of the insertion of guidewires during an EVAR procedure: example of a complex patient case, a first step toward patient-specific parameterized modelsInternational Journal for Numerical Methods in Biomedical Engineering, 2015, 31 (7), pp.e02716. ⟨10.1002/cnm.2716⟩
Article dans une revue
hal-01260570v1
|
|
Développement d'une simulation numérique élastoplastique de la dilatation d'une artère sténosée14ème Colloque National en Calcul des Structures, May 2019, Giens, France
Communication dans un congrès
hal-02521395v1
|
Patient-specific simulation of tools insertion before stent-graft deployment during EVAR and results comparison to 3D introperative data12th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Oct 2014, Amsterdam, Netherlands
Communication dans un congrès
hal-02533261v1
|
|
Influence of plaque geometry and composition on numerically simulated balloon angioplasty outcomes16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Aug 2019, New York, United States
Poster de conférence
hal-02526283v1
|