Access content directly

Alex Montagne

69
Documents

Publications

Image document

In-Situ Nanoindentation Surface Topography of Lead-Free Piezoelectric Thin Films

Maxence Bigerelle , Julie Lemesle , Alex Montagne , Denis Remiens
Applied Sciences, 2024, 14 (24), pp.11849. ⟨10.3390/app142411849⟩
Journal articles hal-04863029v1

Improvement in Calibration Procedure in Nanoindentation: An Indenter Bluntness Indicator

Didier Chicot , A. Montagne , A. Mejias , F. Roudet , T. Coorevits
Experimental Mechanics, 2024, ⟨10.1007/s11340-024-01048-y⟩
Journal articles hal-04486607v1

Influence of thermo-hygrometric conditions on the interface bond in 3D printed concrete

M. Taleb , D. Bulteel , A. Montagne , F. Roudet , S. Rémond
Materials and structures, 2024, 57 (235), ⟨10.1617/s11527-024-02522-8⟩
Journal articles hal-04790064v1

Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

Ayyoub Dziri , Alex Montagne , Francine Roudet , Katir Ziouche , Didier Chicot
Thin Solid Films, 2023, pp.139712. ⟨10.1016/j.tsf.2023.139712⟩
Journal articles hal-03951065v1

Vickers hardness of NiW coating as a potential replacement for Cr-VI: A methodology to consider size effect and tip defect in classical microindentation

Siyang Lu , Francine Roudet , A. Montagne , T. Coorevits , G. Guilbert
Surface and Coatings Technology, 2022, pp.128812. ⟨10.1016/j.surfcoat.2022.128812⟩
Journal articles hal-03760562v1
Image document

Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels

Jianlei Zhang , Yuxiang Liu , Conghui Hu , Ahmed Addad , Alex Montagne
Materials Research Letters, 2022, Materials Research Letters, 10 (3), pp.141-148. ⟨10.1080/21663831.2022.2027034⟩
Journal articles hal-03844751v1

Instrumented indentation based methods to assess fracture toughness (KIC) of self-compacting concrete: Influence of water to binder (w/b) ratio and type of concrete

A. Bouali , S. Grairia , D. Nettour , Y. Chrait , N. Arabi
Engineering Fracture Mechanics, 2022, pp.108796. ⟨10.1016/j.engfracmech.2022.108796⟩
Journal articles hal-03788221v1
Image document

Synthesis and tribocorrosion performances of multilayer (Ta/ZrN)n coatings

Nasser Eddine Beliardouh , Chems Eddine Ramoul , Corinne Nouveau , Emrullah Hakan Kaleli , Alex Montagne
Thin Solid Films, 2022, 749, pp.139184. ⟨10.1016/j.tsf.2022.139184⟩
Journal articles hal-04160408v1

Self-calibration in compliance and indenter tip defect for instrumented indentation

Didier Chicot , Alberto Mejias , Francine Roudet , A. Montagne , Damien Betrancourt
Journal of Materials Research, 2022, ⟨10.1557/s43578-022-00668-1⟩
Journal articles hal-03748331v1
Image document

Identification of the elastic-plastic properties of CrN coating on elastic-plastic substrate by nanoindentation using finite element method-reverse algorithm

Yamen Ben Ammar , Khalil Aouadi , Corinne Nouveau , Aurélien Besnard , Alex Montagne
Thin Solid Films, 2022, 756, pp.139356. ⟨10.1016/j.tsf.2022.139356⟩
Journal articles hal-03770748v1
Image document

The effect of the substrate surface state on the morphology, topography and tribocorrosion behavior of Si/Zr sol-gel coated 316L stainless steel

Stephania Kossman , Leonardo Bertolucci Coelho , Alex Montagne , Alberto Mejias , Adrien van Gorp
Surface and Coatings Technology, 2021, Surface and Coatings Technology, 406, pp.126666. ⟨10.1016/j.surfcoat.2020.126666⟩
Journal articles hal-03027909v1
Image document

Characterization of CrAlN Films Synthesized by DC Reactive Magnetron Sputtering

Khalil Aouadi , Aurélien Besnard , Brahim Tlili , Moez Chafra , Corinne Nouveau
Lecture Notes in Mechanical Engineering, 2021, pp.291-298. ⟨10.1007/978-3-030-52071-7_40⟩
Journal articles hal-03079859v1
Image document

Effect of carbon content on structural, mechanical and tribological properties of Cr-V-C-N coatings

Linda Aissani , Akram Alhussein , Ahlam Belgroune , Corinne Nouveau , Elia Zgheib
Thin Solid Films, 2021, 732, pp.138782. ⟨10.1016/j.tsf.2021.138782⟩
Journal articles hal-03565065v1

Multicyclic indentation on brittle glasses

M. Bentoumi , E.H. Raouache , Z. Driss , A. Montagne , A. Iost
Ceramics International, 2021, 47 (18), pp.26168-26177. ⟨10.1016/j.ceramint.2021.06.024⟩
Journal articles hal-03577543v1

Impact of industrially applied surface finishing processes on tribocorrosion performance of 316L stainless steel

Stephania Kossman , Leonardo B. Coelho , Alberto Mejias , Alex Montagne , Adrien van Gorp
Wear, 2020, Wear, pp.203341. ⟨10.1016/j.wear.2020.203341⟩
Journal articles hal-02926951v1

Mechanical properties of WC/Co-CNT HVOF sprayed coatings

Mariana H. Staia , Alberto Mejias , José Gregorio La Barbera-Sosa , Eli Saúl Puchi-Cabrera , C. Villalobos-Gutiérrez
Surface Engineering, 2020, Special Issue: Coating production and surface engineering of carbide-based composites, 36 (11), pp.1156-1164. ⟨10.1080/02670844.2018.1529285⟩
Journal articles hal-03633675v1

An integral approach of indentation of Functionally Graded Materials

Thierry Coorevits , Alberto Mejias , Alex Montagne , Stephania Kossman , Alain Iost
Surface and Coatings Technology, 2020, 381, pp.125176. ⟨10.1016/j.surfcoat.2019.125176⟩
Journal articles hal-04529140v1

Mechanical and corrosion characterization of industrially treated 316L stainless steel surfaces

L.B. Coelho , S. Kossman , Alberto Mejias , X. Noirfalise , A. Montagne
Surface and Coatings Technology, 2020, 382, pp.125175. ⟨10.1016/j.surfcoat.2019.125175⟩
Journal articles hal-04529133v1

Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests

S. Grairia , Y. Chrait , A. Montagne , A. Mejias , A. Lost
Composite Interfaces, 2020, 27 (3), pp.307-326. ⟨10.1080/09276440.2019.1626183⟩
Journal articles hal-03256454v1

Structural, tribological and antibacterial properties of (α + β) based ti-alloys for biomedical applications

Mamoun Fellah , Naouel Hezil , Mohammed Zine Touhami , Mohammed Abdulsamad , Aleksei Obrosov
Journal of Materials Research and Technology, 2020, 9 (6), pp.14061-14074. ⟨10.1016/j.jmrt.2020.09.118⟩
Journal articles hal-03564940v1

Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests

Said Grairia , Yacine Chrait , Alex Montagne , Alberto Mejias , Alain Lost
Composite Interfaces , 2020, 27 (3), pp.307-326. ⟨10.1080/09276440.2019.1626183⟩
Journal articles hal-03577566v1
Image document

Effect of annealing treatment on the microstructure, mechanical and tribological properties of chromium carbonitride coatings

Linda Aissani , Mamoun Fellah , Lamia Radjehi , Corinne Nouveau , Alex Montagne
Surface and Coatings Technology, 2019, 359, pp.403-413. ⟨10.1016/j.surfcoat.2018.12.099⟩
Journal articles hal-02276883v1

Nano‐indentation for probing mechanical properties of nanocomposites based on ethylene butyl acrylate copolymer and carbon black

Mohamed Bentoumi , Ahmed Mdarhri , Alex Montagne , Ali Nourdine , Ilham El Aboudi
Journal of Applied Polymer Science, 2019, 136 (35), pp.47897. ⟨10.1002/app.47897⟩
Journal articles hal-02192854v1

Virtual machine concept applied to uncertainties estimation in instrumented indentation testing

Thierry Coorevits , Stephania Kossman , Didier Chicot , François Hennebelle , Alex Montagne
Journal of Materials Research, 2019, 34 (14), pp.2501-2516. ⟨10.1557/jmr.2019.203⟩
Journal articles hal-03577570v1
Image document

Contraintes résiduelles et comportement mécanique de revêtements nickel-bore

Alex Montagne , Véronique Vitry , Luiza Bonin , Muhammad Zeeshan Mughal , Marco Sebastiani
Matériaux et Techniques, 2019, 107 (2), pp.205. ⟨10.1051/mattech/2019016⟩
Journal articles hal-02960316v1

Effect of calcination temperature on friction and wear behavior of α–alumina (α‐Al2O3) for biomedical applications

Mamoun Fellah , Linda Aissani , Mohammed Abdul Samad , Mythili Prakasam , Agung Purnama
International Journal of Applied Ceramic Technology, 2019, 16 (2), pp.462-470. ⟨10.1111/ijac.13116⟩
Journal articles hal-02008290v1
Image document

Effect of Zr content on friction and wear behavior of Cr‐Zr‐N coating system

Mamoun Fellah , Linda Aissani , Mohammed Abdul Samad , Agung Purnama , Hamid Djebaili
International Journal of Applied Ceramic Technology, 2018, 15 (3), pp.701-715. ⟨10.1111/ijac.12833⟩
Journal articles hal-03078566v1
Image document

On functional signatures of bare and coated formwork skin surfaces

N. Spitz , N. Coniglio , M. El Mansori , A. Montagne , S. Mezghani
Construction and Building Materials, 2018, 189, pp.560-567
Journal articles hal-01876403v1
Image document

Quantitative and representative adherence assessment of coated and uncoated concrete-formwork

N. Spitz , N. Coniglio , M. El Mansori , A. Montagne , S. Mezghani
Surface and Coatings Technology, 2018, 352, pp.247-256
Journal articles hal-01876401v1
Image document

Thermal treatment effect on structural and mechanical properties of Cr–C coatings

Mamoun Fellah , Linda Aissani , Amel Zairi , Mohamed Abdul Samad , Corinne Nouveau
Transactions of the IMF, 2018, 96 (2), pp.79-85
Journal articles hal-02362101v1

Assessment of the mechanical and tribological performance of a ZrN PVD coating

Mariana Henriette Staia , A. Trocelis , Amel Zairi , Maribel Suarez , Eli Saúl Puchi-Cabrera
Surface Engineering, 2018, 35 (6), pp.491-500. ⟨10.1080/02670844.2017.1414766⟩
Journal articles hal-03676488v1

Mechanical properties of porous silicon and oxidized porous silicon by nanoindentation technique

Souheyla Fakiri , Alex Montagne , Khadidja Rahmoun , Alain Iost , Katir Ziouche
Materials Science and Engineering: A, 2018, 711, pp.470-475. ⟨10.1016/j.msea.2017.11.013⟩
Journal articles hal-03183489v1

Interfacial Indentation Test for the Study of Reinforcement bar/concrete matrix Adhesion i n High Performance Self Compacting Concretes

S. Graira , Y. Chrait , A. Montagne , Didier Chicot , A. Lost
Journal of Materials and Environmental Science , 2018, 9 (1), pp.189-200. ⟨10.26872/jmes.2018.9.1.22⟩
Journal articles hal-03577591v1

Hardness evaluation from a bilayer coating system of Ni-P deposited on carbon steel plates by multicycle indentation tests

A. Mejias , Didier Chicot , A. Pertuz , A. Iost , A. Montagne
Surface and Coatings Technology, 2018, 334, pp.410-419. ⟨10.1016/j.surfcoat.2017.11.011⟩
Journal articles hal-03577593v1
Image document

Characterisation of R.F. magnetron sputtered Cr-N, Cr-Zr-N and Zr-N coatings

Mamoun Fellah , Linda Aissani , Mohamed Abdul Samad , Said Mechacheti , Mohamed Zine Touhami
Transactions of IMF, 2017, 95 (5), pp.261-268. ⟨10.1080/00794236.2017.1339464⟩
Journal articles hal-03169180v1
Image document

A new method to fabricate Fe-TiC composite using conventional sintering and steam hammer

Ali Lahouel , Saïd Boudebane , Alain Iost , Alex Montagne
International Journal of Engineering Research in Africa , 2017, 29, pp.28-44. ⟨10.4028/www.scientific.net/JERA.29.28⟩
Journal articles hal-01538096v1
Image document

Experimental study of a six new ball-burnishing strategies effects on the Al-alloy flat surfaces integrity enhancement

Hatem Amdouni , Hassen Bouzaiene , Alex Montagne , Adrien van Gorp , Thierry Coorevits
Int. J. Adv. Manuf. Technol, 2017, 90, pp.2271-2282. ⟨10.1007/s00170-016-9529-9⟩
Journal articles hal-03169212v1

Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings

Djahida Sidane , H. Rammal , A. Beljebbar , Sophie C. Gangloff , Didier Chicot
Materials Science and Engineering: C, 2017, 72, pp.650-658. ⟨10.1016/j.msec.2016.11.129⟩
Journal articles hal-01433854v1
Image document

Indentation : fondamentaux et développements

Alex Montagne , Didier Chicot , Alain Iost , Éric Le Bourhis
Matériaux et Techniques, 2017, 105 (1), pp.101. ⟨10.1051/mattech/2017004⟩
Journal articles hal-02554771v2

Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings

D. Sidane , H. Rammal , A. Beljebbar , S.C. Gangloff , Didier Chicot
Materials Science and Engineering: C, 2017, 72, pp.650-658. ⟨10.1016/j.msec.2016.11.129⟩
Journal articles hal-03577609v1
Image document

Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application

Djahida Sidane , Hafit Khireddine , Fatima Bir , Sabeha Yala , Alex Montagne
Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. ⟨10.1007/s11661-017-4108-8⟩
Journal articles hal-01565674v1
Image document

Structural and mechanical properties of Cr–Zr–N coatings with different Zr content

Linda Aissani , Mamoun Fellah , Corinne Nouveau , Mohamed Abdul Samad , Alex Montagne
Surface Engineering, 2017, pp.1-9
Journal articles hal-03169341v1

Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application

Djahida Sidane , Hafit Khireddine , Fatima Bir , Sabeha Yala , Alex Montagne
Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. ⟨10.1007/s11661-017-4108-8⟩
Journal articles hal-03577597v1
Image document

Scale effect on tribo-mechanical behavior of vegetal fibers in reinforced bio-composite materials

Faissal Chegdani , Mohamed El Mansori , Sabeur Mezghani , Alex Montagne
Composites Science and Technology, 2017, 150, pp.87-94
Journal articles hal-02148825v1

Multiscale and multicycle instrumented indentation to determine mechanical properties: Application to the BK7 crown borosilicate

M. Bentoumi , D. Bouzid , H. Benzaama , A. Mejias , S. Kossman
Journal of Materials Research, 2017, 32 (8), pp.1444-1455. ⟨10.1557/jmr.2016.523⟩
Journal articles hal-03577608v1
Image document

Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys

Mamoun Fellah , Linda Aissani , Mohammed Abdul Samad , Alain Iost , Touhami Mohamed Zine
Acta Metallurgica Sinica, 2017, 30 (11), pp.1089-1099. ⟨10.1007/s40195-017-0652-x⟩
Journal articles hal-03078604v1
Image document

Friction and Wear Performance of Biomaterials Alloy AISI 316L and Ti-6Al-7Nb

Mamoun Fellah , Linda Aissani , Mohamed Abdul Samad , Mohamed Labaiz , Alex Montagne
Trends in biomaterials & artificial organs, 2016, 30 (2), pp.106-115
Journal articles hal-03169232v1
Image document

Investigations on the mechanical properties of the elementary thin films composing a CuIn1−xGaxSe2 solar cell using the nano indentation technique.

Hocine Abib , Alain Iost , Alex Montagne , Khadidja Rahmoun , Boubakeur Ayachi
Thin Solid Films, 2016, pp.1-5. ⟨10.1016/j.tsf.2016.11.013⟩
Journal articles hal-03166870v1
Image document

Modeling and optimization of a ball-burnished aluminum alloy flat surface with a crossed strategy based on response surface methodology

Hatem Hamdouni , Hassen Bouzaiene , Alex Montagne , Mustapha Nasri , Alain Iost
International Journal of Advanced Manufacturing Technology, 2016, pp.1-14. ⟨10.1007/s00170-016-8817-8⟩
Journal articles hal-01313977v1
Image document

Fracture toughness of glasses and hydroxyapatite: a comparative study of 7 methods by using Vickers indenter

Isabel Hervas , Alex Montagne , Adrien van Gorp , M. Bentoumi , Anthony Thuault
Ceramics International, 2016, 42 (11), pp.12740-12750. ⟨10.1016/j.ceramint.2016.05.030⟩
Journal articles hal-01337280v1

GpIb -VWF blockade restores vessel patency by dissolving platelet aggregates formed under very high shear rate in mice

A. Le Behot , M. Gauberti , S. Martinez de Lizarrondo , A. Montagne , Eloïse D Lemarchand
Blood, 2014, 123 (21), pp.3354-3363. ⟨10.1182/blood-2013-12-543074⟩
Journal articles hal-02153395v1

Unveiling an exceptional zymogen: the single-chain form of tPA is a selective activator of NMDA receptor-dependent signaling and neurotoxicity

J Parcq , T. Bertrand , A. Montagne , A Baron , R Macrez
Cell Death and Differentiation, 2012, 19 (12), pp.1983-1991. ⟨10.1038/cdd.2012.86⟩
Journal articles hal-02325153v1

NR2D-containing NMDA receptors mediate tissue plasminogen activator-promoted neuronal excitotoxicity

A Baron , A Montagne , Frédéric Cassé , S Launay , E Maubert
Cell Death and Differentiation, 2010, 17 (5), pp.860-871. ⟨10.1038/cdd.2009.172⟩
Journal articles hal-03895693v1
Image document

Assessing the homogeneity of powder mixtures by on-line electrical capacitance

N Ehrhardt , A Montagne , Henri Berthiaux , B Dalloz-Dubrujeaud , Cendrine Gatumel
Chemical Engineering and Processing: Process Intensification, 2005, 44 (2), pp.303-313. ⟨10.1016/j.cep.2004.03.016⟩
Journal articles hal-01649523v1
Image document

Effect of Bilayer Variation on the Properties of CrN/CrAlN Multilayer Coatings Produced by DC Magnetron Sputtering

K. Aouadi , Aurélien Besnard , Corinne Nouveau , Alex Montagne , B. Tlili
2nd International Conference on Innovative Materials, Manufacturing, and Advanced Technologies. IMMAT 2022, Oct 2022, sousse, Tunisia. pp.161-168
Conference papers hal-04212698v1

Properties of High Entropy Alloy coatings by laser melting

Anais Galliere , Hervé Morvan , Jean-François Trelcat , Laurent Boilet , Alex Montagne
33rd International Conference on Surface Modification Technologies, Jun 2019, Naples, Italy
Conference papers hal-03474885v1
Image document

Homogénéité des surfaces de pièces obtenues par Fabrication Additive

Valentin Larivière , Raphaël Deltombe , Alex Montagne , Guillaume Vansteenkiste , Maxence Bigerelle
CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
Conference papers hal-03465682v1
Image document

Etude des proprietes mecaniques des couches galvanisees par nanoindentation

Mohamed Labaiz , Ahlem Taleb , Alex Montagne , Alain Iost
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-03169360v1

Caracterisation des proprietes mecaniques par nanoindentation d’un revêtement de zinc pour differentes epaisseurs de tôles galvanisees

Ahlem Taleb , Mohamed Labaiz , Alain Iost , Alex Montagne
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-03169351v1
Image document

Caractérisation mécanique de revêtements sol-gel hybrides

A. Iost , J. Garcia , A. Montagne , J.-M. Sobrino
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-01485083v1

Etude par nanoindentation des proprietes mecaniques du multicouche constituant une cellule solaire a base de cigs

Hocine Abib , Alain Iost , Alex Montagne , Khadidja Rahmoun , Boubakeur Ayachi
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-03169269v1
Image document

Amélioration de l’intégrité des surfaces plates usinée de l’alliage d'aluminium 2017A par l'application de six nouvelles stratégies de galetage à bille.

Hatem Amdouni , Hassen Bouzaiene , Alex Montagne , Mustapha Nasri , Alain Iost
Journées d’Etudes sur la Fonderie et l’Environnement, May 2016, Annaba, Algérie
Conference papers hal-01329489v1
Image document

ASSESSMENT OF THE MECHANICAL AND TRIBOLOGICAL PERFORMANCE OF A ZrN PVD COATING

Mariana Staia , A Trocelis , Amel Zairi , M Suarez , Eli Saúl Puchi-Cabrera
Surface Modification Technologies, Jul 2016, Milan, Italy. pp.1-9
Conference papers hal-03169208v1

Nanoindentation hardness and macroscopic mechanical behaviors in filled elastomeric nanocomposites

M. Bentoumi , A. Mdarhi , A. Nourdine , I. El Aaboudi , I. Belkyal
Colloque Indentation 2016, Oct 2016, Lille, France
Conference papers hal-02128786v1

Influence of processing conditions on nanoindentation properties of spark plasma sintered PTFE

I. El Aboudi , A. Mdarhi , M. Bentoumi , A. Nourdine , M. El Azhari
Colloque Indentation 2016, Oct 2016, Lille, France
Conference papers hal-02128785v1
Image document

Caracterisations mecaniques par procede de nanoindentation de couches de silicium poreux nanostructurees

Souheyla Fakiri , Alain Iost , Alex Montagne , Khadija Rahmoun , Katir Ziouche
INDENTATION, Oct 2016, Lille, France
Conference papers hal-01485136v1

Extrinsic base resistance optimization in DPSA-SEG SiGe:C HBTs

Elodie Canderle , Pascal Chevalier , A. Montagne , L. Moynet , Gregory Avenier
26th IEEE Bipolar/BiCMOS Circuits and Technology Meeting, BCTM 2012, Sep 2012, Portland, OR, United States. pp.1-4, ⟨10.1109/BCTM.2012.6352650⟩
Conference papers hal-00801192v1