Andrei Constantinescu

117
Documents

Présentation

Professional Experience

CNRS Ecole Polytechnique, Palaiseau, France

Laboratoire de Mécanique des Solides

Directeur de Recherches 1 ère classe since 2015

Directeur de Recherches 2 ème classe 2005-2015

Chargé de Recherches 1995 - 2005

Visiting Positions

ETH Zurich, Switzerland Visiting professor 2015–2016

Tokyo Institut of Technology Tokyo, Japon Visiting professor 2008

PSA Péugeot-Citroen Vélizy, France Industrial leave 2002

Oxford University Oxford, United Kingdom Visiting fellow, Royal Society 2002

Cornell University Ithaca, NY, USA Visiting scientist 1994

Education

Université Pierre et Marie Curie Paris, France Habilitation 2005

Ecole Polytechnique Palaiseau, France PhD in mechanics 1994

Ecole Polytechnique Palaiseau, France Master in mechanics 1991

University of Bucharest Bucharest, Romania Bachelor & Master in mathematics-mechanics 1988

Awards

DGA Fellowship, France Séjours étranger, 2015

Académie des Sciences France Doisteau-Emile Blutet Prize 2006

ASME Gas Turbine Institute USA Best paper award 2009

Journal of Fatigue and Fracture of Engineering Materials and Structure Best paper award 2003

Goverment Fellowship France Master and PhD studies 1990-1994

Board and management activities

CNRS Paris, France Chargé de mission, INSIS since 2011

French National Commitee for Mechanics France national organisation for IUTAM activities

treasurer since 2009

Comité National,CNRS Paris, France Solid Mechanics (Section 09)

Member 2002 - 2004

Laboratoire de Mécanique des Solides Palaiseau, France

CNRS & Ecole Polytechnique

Member of the management commitee since 2010

Publications

Google Scholar

Publications

Publications

Image document

Stress-based topological shape optimization for thick shells using the level set method and trimmed non-conforming multi-patch isogeometric analysis

Fernando Hübner Scherer , Malek Zarroug , Hakim Naceur , Andrei Constantinescu
Structural and Multidisciplinary Optimization, 2024, 67 (10), pp.177. ⟨10.1007/s00158-024-03892-x⟩
Article dans une revue hal-04758595 v1
Image document

Topology optimization of curved thick shells using level set method and non-conforming multi-patch isogeometric analysis

Fernando Hübner Scherer , Malek Zarroug , Hakim Naceur , Andrei Constantinescu
Computer Methods in Applied Mechanics and Engineering, 2024, 430, pp.117205. ⟨10.1016/j.cma.2024.117205⟩
Article dans une revue hal-04758603 v1
Image document

Profiling oocytes with neural networks from images and mechanical data

Samuel Lamont , Juliette Fropier , Joël Abadie , Emmanuel Piat , Andrei Constantinescu et al.
Journal of the mechanical behavior of biomedical materials, 2023, 138, ⟨10.1016/j.jmbbm.2022.105640⟩
Article dans une revue hal-04224367 v1
Image document

Viscoelastic behavior of filled silicone elastomers and influence of aging in inert and hermetic environment

Martin Avila Torrado , Andrei Constantinescu , Michael Johlitz , Alexander Lion
Continuum Mechanics and Thermodynamics, 2022, ⟨10.1007/s00161-022-01112-9⟩
Article dans une revue hal-03740980 v1
Image document

Analysis Of Real-Life Multi-Input Loading Histories For The Reliable Design Of Vehicle Chassis

Emilien Baroux , Benoit Delattre , Andrei Constantinescu , Patrick Pamphile , Ida Raoult
Procedia Structural Integrity, 2022, 38, pp.497-506. ⟨10.1016/j.prostr.2022.03.050⟩
Article dans une revue hal-03873522 v1
Image document

Thermal analysis and shrinkage characterization of the photopolymers for DLP additive manufacturing processes

Kubra Sekmen , Thomas Rehbein , Michael Johlitz , Alexander Lion , Andrei Constantinescu
Continuum Mechanics and Thermodynamics, 2022, ⟨10.1007/s00161-022-01137-0⟩
Article dans une revue hal-03854510 v1
Image document

Statistically equivalent surrogate material models: Impact of random imperfections on the elasto-plastic response

Ustim Khristenko , Andrei Constantinescu , Patrick Le Tallec , Barbara Wohlmuth
Computer Methods in Applied Mechanics and Engineering, 2022, 402, pp.115278. ⟨10.1016/j.cma.2022.115278⟩
Article dans une revue hal-03873516 v1
Image document

Residual stresses in thin walled-structures manufactured by directed energy deposition: In-situ measurements, fast thermo-mechanical simulation and buckling

Daniel Weisz-Patrault , Pierre Margerit , Andrei Constantinescu
Additive Manufacturing, 2022, 56, pp.102903. ⟨10.1016/j.addma.2022.102903⟩
Article dans une revue hal-03873521 v2
Image document

Crushing of additively manufactured thin-walled metallic lattices: Two-scale strain localization analysis

Yanis Balit , Pierre Margerit , Eric Charkaluk , Andrei Constantinescu
Mechanics of Materials, 2021, 160, pp.103915. ⟨10.1016/j.mechmat.2021.103915⟩
Article dans une revue hal-03873524 v1
Image document

Design of thin micro-architectured panels with extension-bending coupling effects using topology optimization

Filippo Agnelli , Grigor Nika , Andrei Constantinescu
Computer Methods in Applied Mechanics and Engineering, 2021, 391, pp.114496. ⟨10.1016/j.cma.2021.114496⟩
Article dans une revue hal-03525449 v1
Image document

Shape-shifting panel from 3D printed undulated ribbon lattice

Filippo Agnelli , Michele Tricarico , Andrei Constantinescu
Extreme Mechanics Letters, 2021, 42, pp.101089. ⟨10.1016/j.eml.2020.101089⟩
Article dans une revue hal-03025359 v1

Temperature- and degree of cure-dependent viscoelastic properties of photopolymer resins used in digital light processing

Thomas Rehbein , Michael Johlitz , Alexander Lion , Kubra Sekmen , Andrei Constantinescu
Progress in Additive Manufacturing, 2021, 6 (4), pp.743-756. ⟨10.1007/s40964-021-00194-2⟩
Article dans une revue hal-03873523 v1
Image document

Systematic two-scale image analysis of extreme deformations in soft architectured sheets

Filippo Agnelli , Pierre Margerit , Paolo Celli , Chiara Daraio , Andrei Constantinescu
International Journal of Mechanical Sciences, 2021, 194, pp.106205. ⟨10.1016/j.ijmecsci.2020.106205⟩
Article dans une revue hal-03025307 v1
Image document

FIB manufactured microstructures with low Coefficients of Thermal Expansion

Eva Héripré , Marwen Mehrez , Andrei Constantinescu
Mechanics Research Communications, 2021, ⟨10.1016/j.mechrescom.2021.103667⟩
Article dans une revue hal-03128107 v1
Image document

A Statistical Framework for Generating Microstructures of Two-Phase Random Materials: Application to Fatigue Analysis

Ustim Khristenko , Andrei Constantinescu , Patrick Le Tallec , J. Tinsley Oden , Barbara I Wohlmuth
Multiscale Modeling and Simulation: A SIAM Interdisciplinary Journal, 2020, 18 (1), pp.21-43. ⟨10.1137/19M1259286⟩
Article dans une revue hal-02447357 v1
Image document

High resolution digital image correlation for microstructural strain analysis of a stainless steel repaired by Directed Energy Deposition

Yanis Balit , Camille Guévenoux , Alexandre Tanguy , Manas V Upadhyay , Eric Charkaluk et al.
Materials Letters, In press, 270, pp.127632. ⟨10.1016/j.matlet.2020.127632⟩
Article dans une revue hal-02503766 v1
Image document

Probabilistic Low Cycle Fatigue criterion for nodular cast-irons

Fabien Szmytka , Eric Charkaluk , Andrei Constantinescu , Pierre Osmond
International Journal of Fatigue, 2020, 139, pp.105701. ⟨10.1016/j.ijfatigue.2020.105701⟩
Article dans une revue hal-03080253 v1
Image document

Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components

Camille Guévenoux , Simon Hallais , Alexandre Charles , Eric Charkaluk , Andrei Constantinescu
Optics and Laser Technology, 2020, 128, pp.106218. ⟨10.1016/j.optlastec.2020.106218⟩
Article dans une revue hal-02517596 v1
Image document

Self-heating behavior during cyclic loadings of 316L stainless steel specimens manufactured or repaired by Directed Energy Deposition

Yanis Balit , Louis-Romain Joly , Fabien Szmytka , Sylvain Durbecq , Eric Charkaluk et al.
Materials Science and Engineering: A, 2020, 786, pp.139476. ⟨10.1016/j.msea.2020.139476⟩
Article dans une revue hal-02563296 v1
Image document

Tensile and ductile fracture properties of as-printed 316L stainless steel thin walls obtained by directed energy deposition

Pierre Margerit , Daniel Weisz-Patrault , Krishnaswamy Ravi-Chandar , Andrei Constantinescu
Additive Manufacturing, 2020, 37, pp.101664. ⟨10.1016/j.addma.2020.101664⟩
Article dans une revue hal-03042512 v1
Image document

Plastic strain localization induced by microstructural gradient in laser cladding repaired structures

Camille Guévenoux , Simon Hallais , Yanis Balit , Alexandre Charles , Eric Charkaluk et al.
Theoretical and Applied Fracture Mechanics, 2020, 107, pp.102520. ⟨10.1016/j.tafmec.2020.102520⟩
Article dans une revue hal-02509924 v1
Image document

Experimental investigation and modelling of the curing behaviour of photopolymers

T. Rehbein , A. Lion , M. Johlitz , Andrei Constantinescu
Polymer Testing, 2020, 83, pp.106356. ⟨10.1016/j.polymertesting.2020.106356⟩
Article dans une revue hal-02468304 v1
Image document

Digital image correlation for microstructural analysis of deformation pattern in additively manufactured 316L thin walls

Yanis Balit , Eric Charkaluk , Andrei Constantinescu
Additive Manufacturing, 2020, 31, pp.100862. ⟨10.1016/j.addma.2019.100862⟩
Article dans une revue hal-02409832 v1

Design of multi-layer materials using inverse homogenization and a level set method

Grigor Nika , Andrei Constantinescu
Computer Methods in Applied Mechanics and Engineering, 2019, 346, pp.388-409. ⟨10.1016/j.cma.2018.11.029⟩
Article dans une revue hal-02411495 v1
Image document

Computational fatigue assessment of mooring chains under tension loading

Imanol Martinez Perez , Andrei Constantinescu , Philippe Bastid , Yan-Hui Zhang , Vengatesan Venugopal
Engineering Failure Analysis, 2019, 106, ⟨10.1016/j.engfailanal.2019.06.073⟩
Article dans une revue hal-02411493 v1
Image document

Identification of the material behavior of adhesive joints under dynamic multiaxial loadings

Anthony Janin , Andrei Constantinescu , Daniel Weisz-Patrault , Robert Nevière , Matthieu Stackler et al.
International Journal of Impact Engineering, 2019, ⟨10.1016/j.ijimpeng.2019.103355⟩
Article dans une revue hal-02372694 v1
Image document

Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson’s ratio

Filippo Agnelli , Andrei Constantinescu , Grigor Nika
Continuum Mechanics and Thermodynamics, 2019, ⟨10.1007/s00161-019-00851-6⟩
Article dans une revue hal-02410356 v1
Image document

On adhesive theories in multilayered interfaces, with particular regard to "surface force apparatus" geometry

Michele Tricarico , Antonio Papangelo , Andrei Constantinescu , Michele Ciavarella
Facta Universitatis, Series: Mechanical Engineering, 2019, 17 (1), pp.95. ⟨10.22190/FUME190118011T⟩
Article dans une revue hal-02411497 v1
Image document

A modified dissipated energy fatigue criterion to consider the thermo-oxidative ageing of electrically conductive silicone adhesive joints

Alexandre Jouan , Andrei Constantinescu
International Journal of Fatigue, 2018, 116, pp.68-79. ⟨10.1016/j.ijfatigue.2018.06.005⟩
Article dans une revue hal-01819056 v1
Image document

A new multiaxial specimen for determining dynamic properties of adhesive joints

A. Janin , Andrei Constantinescu , Daniel Weisz-Patrault , R. Neviere , M. Stackler et al.
Experimental Mechanics, 2018, ⟨10.1007/s11340-018-0402-7⟩
Article dans une revue hal-01823192 v1
Image document

Mechanosensitivity of cancer cells in contact with soft substrates using AFM

Yara Abidine , Andrei Constantinescu , Valérie M. Laurent , Vinoth Sundar Rajan , Richard Michel et al.
Biophysical Journal, 2018, 114 (5), pp.1165-1175. ⟨10.1016/j.bpj.2018.01.005⟩
Article dans une revue hal-01615377 v2
Image document

A critical comparison of shear tests for adhesive joints

Alexandre Jouan , Andrei Constantinescu
International Journal of Adhesion and Adhesives, 2018, 84, pp.63-79. ⟨10.1016/j.ijadhadh.2018.02.035⟩
Article dans une revue hal-01765200 v1
Image document

Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets

Anton Bauhofer , Sebastian Krödel , Jan Rys , Osama R. Bilal , Andrei Constantinescu et al.
Advanced Materials, 2017, 29 (42), ⟨10.1002/adma.201703024⟩
Article dans une revue hal-01632916 v1

Prestrain dependent viscoelastic model: Structural computation under dynamic loading

Dimitri Jalocha , Andrei Constantinescu , Robert Nevière
International Journal of Solids and Structures, 2017, 120, pp.1-6. ⟨10.1016/j.ijsolstr.2016.12.011⟩
Article dans une revue hal-01632918 v1
Image document

A homogenization model for porous ductile solids under cyclic loads comprising a matrix with isotropic and linear kinematic hardening

Long Cheng , Kostas Danas , Andrei Constantinescu , Djimedo Kondo
International Journal of Solids and Structures, 2017, 121, pp.174-190. ⟨10.1016/j.ijsolstr.2017.05.024⟩
Article dans une revue hal-01537602 v1

An Experimental Technique For The Characterization Of Adhesive Joints Under Dynamic Multiaxial Loadings

Anthony Janin , Andrei Constantinescu , Daniel Weisz-Patrault , Robert Nevière , Matthieu Stackler et al.
Procedia Engineering, 2017, 197, pp.52-59. ⟨10.1016/j.proeng.2017.08.081⟩
Article dans une revue hal-01632922 v1
Image document

Stress relaxation in polymeric microlattice materials

Sebastian Krödel , Lichen Li , Andrei Constantinescu , Chiara Daraio
Materials & Design, 2017, 130, pp.433-441. ⟨10.1016/j.matdes.2017.05.060⟩
Article dans une revue hal-01632926 v1
Image document

A homogenization based yield criterion for a porous Tresca material with ellipsoidal voids

Armel Mbiakop , Danas Kostas , Andrei Constantinescu
International Journal of Fracture, 2016, ⟨10.1007/s10704-015-0071-9⟩
Article dans une revue hal-01395637 v1
Image document

A shakedown analysis of high cycle fatigue of shape memory alloys

Ferdinando Auricchio , Andrei Constantinescu , Costantino Menna , Giulia Scalet
International Journal of Fatigue, 2016, 87, pp.112-123. ⟨10.1016/j.ijfatigue.2016.01.017⟩
Article dans une revue hal-01282081 v1
Image document

Micromechanical modeling for the probabilistic failure prediction of stents in high-cycle fatigue

Raphael Guerchais , Giulia Scalet , Andrei Constantinescu , Ferdinando Auricchio
International Journal of Fatigue, 2016, 87, pp.405-417. ⟨10.1016/j.ijfatigue.2016.02.026⟩
Article dans une revue hal-01392531 v1
Image document

Graphitization and amorphization of textured carbon using high-energy nanosecond laser pulses

Loïc Loisel , Marc Châtelet , Guillaume Giudicelli , Mathias Lebihain , Yi Yang et al.
Carbon, 2016, 105, pp.227-232. ⟨10.1016/j.carbon.2016.04.026⟩
Article dans une revue hal-01765284 v1
Image document

Microstructure and deformation mechanisms of a solid propellant using 1H NMR spectroscopy

Aurélie Azoug , Andrei Constantinescu , Robert Nevière , Guy Jacob
Fuel, 2015, 148 (May), pp.39-47. ⟨10.1016/j.fuel.2015.01.074⟩
Article dans une revue hal-01219721 v1
Image document

Prestrained biaxial DMA investigation of viscoelastic nonlinearities in highly filled elastomers

Dimitri Jalocha , Andrei Constantinescu , Robert Nevière
Polymer Testing, 2015, 42, pp.37-44. ⟨10.1016/j.polymertesting.2015.01.005⟩
Article dans une revue hal-01219730 v1
Image document

Fatigue of Metallic Stents: From Clinical Evidence to Computational Analysis

Ferdinando Auricchio , Andrei Constantinescu , Michele Conti , Giulia Scalet
Annals of Biomedical Engineering, 2015, pp.1-15. ⟨10.1007/s10439-015-1447-8⟩
Article dans une revue hal-01219403 v1
Image document

On void shape effects of periodic elasto-plastic materials subjected to cyclic loading

Armel Mbiakop , Andrei Constantinescu , Kostas Danas
European Journal of Mechanics - A/Solids, 2015, 49, pp.481-499. ⟨10.1016/j.euromechsol.2014.09.001⟩
Article dans une revue hal-01219714 v1
Image document

Prestrain-dependent viscosity of a highly filled elastomer: experiments and modeling

Dimitri Jalocha , Andrei Constantinescu , Robert Nevière
Mechanics of Time-Dependent Materials, 2015, 19 (3), ⟨10.1007/s11043-015-9262-z⟩
Article dans une revue hal-01219736 v1
Image document

A computational approach for the lifetime prediction of cardiovascular balloon-expandable stents

Ferdinando Auricchio , Andrei Constantinescu , Michele Conti , Giulia Scalet
International Journal of Fatigue, 2015, 75, pp.69-79. ⟨10.1016/j.ijfatigue.2015.02.002⟩
Article dans une revue hal-01219744 v1
Image document

An analytical model for porous single crystals with ellipsoidal voids

Armel Mbiakop , Andrei Constantinescu , Kostas Danas
Journal of the Mechanics and Physics of Solids, 2015, 84, pp.436-467. ⟨10.1016/j.jmps.2015.07.011⟩
Article dans une revue hal-01219387 v1
Image document

Molecular Origin of the Influence of the Temperature on the Loss Factor of a Solid Propellant

Aurélie Azoug , Robert Nevière , Andrei Constantinescu
Propellants, Explosives, Pyrotechnics, 2015, 40 (4), ⟨10.1002/prep.201400060⟩
Article dans une revue istex hal-01219725 v1
Image document

Influence of process-induced microstructure on hardness of two Al-Si alloys

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Gildas Guillemot , Fabien Szmytka
Materials Science and Engineering: A, 2015, 646, pp.190-200. ⟨10.1016/j.msea.2015.08.051⟩
Article dans une revue hal-01253000 v1
Image document

Revisiting the identification of distributed elastic coefficients in anisotropic media

Andrei Constantinescu , Olivian Simionescu , Alexandru Stanciu
Annals of the University of Bucharest. Mathematical series, 2014
Article dans une revue hal-01282124 v1
Image document

Fatigue of 316L stainless steel notched

Ferdinando Auricchio , Andrei Constantinescu , Giulia Scalet
International Journal of Fatigue, 2014, 68, pp.231-247. ⟨10.1016/j.ijfatigue.2014.04.013⟩
Article dans une revue hal-01219711 v1
Image document

Probability density functions: From porosities to fatigue lifetime

Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Shadan Tabibian
International Journal of Fatigue, 2014, 63, pp.127-136. ⟨10.1016/j.ijfatigue.2014.01.017⟩
Article dans une revue hal-00961217 v1
Image document

Influence of crosslinking and plasticizing on the viscoelasticity of highly filled elastomers

Aurélie Azoug , Robert Nevière , Rachel-Marie Pradeilles-Duval , Andrei Constantinescu
Journal of Applied Polymer Science, 2014, 131 (12), pp.40392-1-9. ⟨10.1002/app.40392⟩
Article dans une revue istex hal-01219754 v1
Image document

Influence of fillers and bonding agents on the viscoelasticity of highly filled elastomers

Aurélie Azoug , Robert Nevière , Rachel-Marie Pradeilles-Duval , Andrei Constantinescu
Journal of Applied Polymer Science, 2014, 131 (16), ⟨10.1002/app.40664⟩
Article dans une revue istex hal-01219758 v1
Image document

Computational fretting fatigue maps for different plasticity models

Marcel Alquezar-Getan , Victor Hernan Arrieta , Andrei Constantinescu , Leïla Flandi , Habibou Maitournam et al.
Fatigue and Fracture of Engineering Materials and Structures, 2014, 37 (4), ⟨10.1111/ffe.12130⟩
Article dans une revue istex hal-01217299 v1

Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating

Andrei Constantinescu , Alexander M. Korsunsky , Olivier Pison , Abdelbacet Oueslati
International Journal of Solids and Structures, 2013, 50 (18), pp.2798-2807. ⟨10.1016/j.ijsolstr.2013.04.017⟩
Article dans une revue hal-00833490 v1

Fissuration du verre de confinement des déchets radioactifs

Véronique Doquet , Neji Ben Ali , Andrei Constantinescu , Emmanuelle Chabert
Flash X, Lettre Scientifique de l'Ecole Polytechnique ISSN 1775-0385, 2013, 15 (Energies), pp.39-42
Article dans une revue hal-00871002 v1
Image document

Influence of orthogonal prestrain on the viscoelastic behaviour of highly-filled elastomers

Aurélie Azoug , Anders Thorin , Robert Nevière , Rachel-Marie Pradeilles-Duval , Andrei Constantinescu
Polymer Testing, 2013, 32 (2), pp.375-384. ⟨10.1016/j.polymertesting.2012.12.005⟩
Article dans une revue hal-01402496 v1
Image document

Inverse Analysis of Multiple Indentation Unloading Curves for Thin Film Young's Modulus Evaluation

Joris Prou , Kikuo Kishimoto , Kazuaki Inaba , Andrei Constantinescu
Theoretical and Applied Mechanics, 2012, 60, pp.249-261. ⟨10.11345/nctam.60.249⟩
Article dans une revue hal-00723719 v1
Image document

A non-iterative sampling approach using noise subspace projection for EIT

Cédric Bellis , Andrei Constantinescu , Thomas Coquet , Thomas Jaravel , Armin Lechleiter
Inverse Problems, 2012, ⟨10.1088/0266-5611/28/7/075015⟩
Article dans une revue hal-00757299 v1
Image document

TMF-LCF life assessment of a Lost Foam Casting A319 aluminum alloy

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Alexis Oudin
International Journal of Fatigue, 2012, ⟨10.1016/j.ijfatigue.2012.01.012⟩
Article dans une revue istex hal-00757313 v1
Image document

Effect of the sol fraction and hydrostatic deformation on the viscoelastic behavior of prestrained highly filled elastomers

Aurélie Azoug , Andrei Constantinescu , Rachel Marie Praidelles-Duval , M. F. Vallat , R. Nevière et al.
Journal of Applied Polymer Science, 2012, 127 (3), pp.1772-1780. ⟨10.1002/app.37800⟩
Article dans une revue istex hal-00761141 v1
Image document

Influence of prestrain on mechanical properties of highly-filled elastomers: Measurements and modeling

Anders Thorin , Aurélie Azoug , Andrei Constantinescu
Polymer Testing, 2012, 31, pp.978-986. ⟨10.1016/j.polymertesting.2012.07.014⟩
Article dans une revue hal-00723704 v2

Fracture of a borosilicate glass under triaxial tension

Véronique Doquet , Neji Ben Ali , Andrei Constantinescu , Xavier Boutillon
Mechanics of Materials, 2012, 57, pp.15-29. ⟨10.1016/j.mechmat.2012.10.008⟩
Article dans une revue istex hal-00755477 v1
Image document

Fast time-scale average for a mesoscopic high cycle fatigue criterion

Stefano Bosia , Andrei Constantinescu
International Journal of Fatigue, 2012, 45, pp.39-47. ⟨10.1016/j.ijfatigue.2012.01.012⟩
Article dans une revue istex hal-00761153 v1
Image document

TMF criteria for Lost Foam Casting aluminum alloys

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Alexis Oudin
Fatigue and Fracture of Engineering Materials and Structures, 2012, ⟨10.1111/ffe.12006q⟩
Article dans une revue hal-00757317 v1

The inverse problem of seismic fault determination using part time measurements

Huy Duong Bui , Andrei Constantinescu , Hubert Maigre
Journal of Mechanics of Materials and Structures, 2012, 7 (10), ⟨10.2140/jomms.2012.7.997⟩
Article dans une revue hal-00913588 v1
Image document

A computational approach for the fatigue design of threaded connections

Mohamed Ferjani , Daniel Averbuch , Andrei Constantinescu
International Journal of Fatigue, 2011, 33, pp. 610-623. ⟨10.1016/j.ijfatigue.2010.11.006⟩
Article dans une revue hal-00544296 v1
Image document

Semianalytical solution for the stress distribution in notched tubes

Mohamed Ferjani , Daniel Averbuch , Andrei Constantinescu
International Journal of Fatigue, 2011, 33, pp. 557-567. ⟨10.1016/j.ijfatigue.2010.10.009⟩
Article dans une revue hal-00544303 v1

A Modeling Approach to Predict Fretting Fatigue on Highly Loaded Blade Roots

Patrick Yves Wackers , Victor Hernan Arrieta , Marcel Alquezar-Getan , Andrei Constantinescu , Habibou Maitournam
Journal of Engineering for Gas Turbines and Power, 2010, 132 (8), p. : 082101-1 082101-9. ⟨10.1115/1.3205026⟩
Article dans une revue hal-00525622 v1

Plasticity and asperity-induced fatigue crack closure under mixed-mode loading

Véronique Doquet , Quang-Hien Bui , Andrei Constantinescu
International Journal of Fatigue, 2010, 32 (10), pp.1612-1619. ⟨10.1016/j.ijfatigue.2010.02.011⟩
Article dans une revue istex hal-00497694 v1
Image document

Identification of a planar crack in Zener type viscoelasticity

Hui Duong Bui , Stéphanie Chaillat , Andrei Constantinescu , Eva Grasso
Annals of Solid and Structural Mechanics, 2010, 1 (1), pp.3-8. ⟨10.1007/s12356-009-0003-3⟩
Article dans une revue hal-00540730 v1
Image document

Identification of Young's Modulus from Indentation Testing and Inverse Analysis

Joris Prou , Kikuo Kishimoto , Andrei Constantinescu
Journal of Solid Mechanics and Materials Engineering, 2010, 4 (6), pp.781--795
Article dans une revue hal-00723702 v1

Modeling of thermal shock-induced damage in a borosilicate glass

Martine Dubé , Véronique Doquet , Andrei Constantinescu , Daniel George , Yves Remond et al.
Mechanics of Materials, 2010, 42 (9), pp.863-872. ⟨10.1016/j.mechmat.2010.07.002⟩
Article dans une revue istex hal-00512115 v1
Image document

Dissipative aspects in high cycle fatigue

Eric Charkaluk , Andrei Constantinescu
Mechanics of Materials, 2009, 41 (5), pp.483-494. ⟨10.1016/j.mechmat.2009.01.018⟩
Article dans une revue hal-00376738 v1
Image document

Crack initiation under thermal fatigue: An overview of CEA experience: Part II (of II): Application of various criteria to biaxial thermal fatigue tests and a first proposal to improve the estimation of the thermal fatigue damage

A. Fissolo , C. Gourdin , O. Ancelet , S. Amiable , A. Demassieux et al.
International Journal of Fatigue, 2009, 31 (7), pp.1196-1210. ⟨10.1016/j.ijfatigue.2008.11.018⟩
Article dans une revue hal-00544273 v1
Image document

Crack initiation under thermal fatigue: An overview of CEA experience. Part I: Thermal fatigue appears to be more damaging than uniaxial isothermal fatigue

A. Fissolo , S. Amiable , O. Ancelet , F. Mermaz , J.M. Stelmaszyk et al.
International Journal of Fatigue, 2009, 31 (3), pp.587-600. ⟨10.1016/j.ijfatigue.2008.03.038⟩
Article dans une revue hal-00438553 v1
Image document

The influence of indenter bluntness on the apparent contact stiffness of thin coatings

Alexander M. Korsunsky , Andrei Constantinescu
Thin Solid Films, 2009, 517 (17), pp.4835-4844. ⟨10.1016/j.tsf.2009.03.018⟩
Article dans une revue hal-00438552 v1
Image document

On the reconstruction of residual stresses after matter removal in rods

Andrei Constantinescu , Abdelbacet Oueslati
Comptes rendus de l’Académie des sciences. Série IIb, Mécanique, 2008, 336 (1-2), pp.66-79. ⟨10.1016/j.crme.2007.10.016⟩
Article dans une revue istex hal-00346668 v1
Image document

A multiscale approach of fatigue and shakedown for notched structures

Graciela Bertolino , Andrei Constantinescu , Mohamed Ferjani , Philippe Treiber
Theoretical and Applied Fracture Mechanics, 2007, 48 (2), pp.140-151. ⟨10.1016/j.tafmec.2007.05.002⟩
Article dans une revue hal-00167744 v1
Image document

A comparison of lifetime prediction methods for a thermal fatigue experiment

Sébastien Amiable , Stéphane Chapuliot , Andreï Constantinescu , Antoine Fissolo
International Journal of Fatigue, 2006, 28, pp.692-706. ⟨10.1016/j.ijfatigue.2005.09.002⟩
Article dans une revue hal-00111459 v1
Image document

Work of indentation approach to the analysis of hardness and modulus of thin coatings

Alexander Korsunsky , Andreï Constantinescu
Materials Science and Engineering: A, 2006, 423, pp.28-35. ⟨10.1016/j.msea.2005.09.126⟩
Article dans une revue hal-00111507 v1
Image document

Identification of poroelastic constants of tight rocks from laboratory tests

Brice Lecampion , Andrei Constantinescu , Laurent Malinski
International Journal of Geomechanics, 2006, 6, pp.201-208. ⟨10.1061/(ASCE)1532-3641(2006)6:3(201)⟩
Article dans une revue hal-00111451 v1
Image document

A computational lifetime prediction of a thermal shock experiment. Part II: discussion on difference fatigue criteria

Sébastien Amiable , Sébastien Chapuliot , Andreï Constantinescu , Antoine Fissolo
Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.219-228. ⟨10.1111/j.1460-2695.2006.0983.x⟩
Article dans une revue istex hal-00111461 v1
Image document

A computational lifetime prediction of a thermal shock experiment. Part I: thermomechanical modelling and lifetime prediction

Sébastien Amiable , Stéphane Chapuliot , Andreï Constantinescu , Antoine Fissolo
Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.175-182. ⟨10.1111/j.1460-2695.2006.0976.x⟩
Article dans une revue istex hal-00111460 v1
Image document

Estimation of the mesoscopic thermoplastic dissipation in High-Cycle Fatigue

Eric Charkaluk , Andrei Constantinescu
Comptes Rendus Mécanique, 2006, 334, pp.373-379. ⟨10.1016/j.crme.2006.03.014⟩
Article dans une revue hal-00082152 v1
Image document

Inverse problems in elasticity

Marc Bonnet , Andrei Constantinescu
Inverse Problems, 2005, 21, pp.R1-R50. ⟨10.1088/0266-5611/21/2/R01⟩
Article dans une revue hal-00111264 v1
Image document

Sensitivity analysis for parameter identification in quasi-static poroelasticity

Brice Lecampion , Andrei Constantinescu
International Journal for Numerical and Analytical Methods in Geomechanics, 2005, 29 (2), pp.163-185. ⟨10.1002/nag.409⟩
Article dans une revue istex hal-00111439 v1
Image document

An exact inversion formula for determining a planar fault from boundary measurements

Hui Duong Bui , Andrei Constantinescu , H. Maigre
Journal of Inverse and Ill-posed Problems, 2005, 13 (6), pp.553-565. ⟨10.1515/156939405775199514⟩
Article dans une revue istex hal-00167753 v1
Image document

Dissipation and fatigue damage

Eric Charkaluk , Andrei Constantinescu
Materials Testing, 2004, 46, pp.524-530. ⟨10.3139/120.100615⟩
Article dans une revue hal-00104249 v1
Image document

Critère de fatigue polycyclique pour des métaux anisotropes: application au monocristaux

Florian Cano , Andrei Constantinescu , Habibou Maitournam
Comptes Rendus Mécanique, 2004, 332 (2), pp.115-121. ⟨10.1016/j.crme.2003.11.005⟩
Article dans une revue hal-00111401 v1
Image document

A computational approach to thermomechanical fatigue

Andrei Constantinescu , Eric Charkaluk , Guy Lederer , Laetitia Verger
International Journal of Fatigue, 2004, 26, pp.805-818. ⟨10.1016/j.ijfatigue.2004.01.006⟩
Article dans une revue hal-00022603 v1
Image document

Numerical identification of linear cracks in 2D elastodynamics using the instantaneous reciprocity gap

Huy Duong Bui , Andrei Constantinescu , Hubert Maigre
Inverse Problems, 2004, 20, pp.993-1001. ⟨10.1088/0266-5611/20/4/001⟩
Article dans une revue istex hal-00111414 v1
Image document

Principes variationnels et exploitation de mesures de champs en élasticité

Marc Bonnet , Huy Duong Bui , Andrei Constantinescu
Mechanics & Industry, 2003, 4 (6), pp.687-697. ⟨10.1016/j.mecind.2003.09.011⟩
Article dans une revue istex hal-00092399 v1
Image document

Numerical and experimental modal analysis of the reed and pipe of a clarinet

Matteo Facchinetti , Xavier Boutillon , Andrei Constantinescu
Journal of the Acoustical Society of America, 2003, 113 (5), pp.2874-2883. ⟨10.1121/1.1560212⟩
Article dans une revue hal-00111390 v1
Image document

A unified analysis for low and high cycle fatigue based on shakedown concepts

Andrei Constantinescu , Ky Dang Van , Habibou Maitournam
Fatigue and Fracture of Engineering Materials and Structures, 2003, 26, pp.561-568. ⟨10.1046/j.1460-2695.2003.00675.x⟩
Article dans une revue istex hal-00111385 v1
Image document

Mechanical model of the inspiratory pump

Sergio Basso Ricci , Philippe Cluzel , Andrei Constantinescu , Thomas Similowski
Journal of Biomechanics, 2002, 35, pp.139-145. ⟨10.1016/S0021-9290(01)00164-6⟩
Article dans une revue hal-00111343 v1
Image document

Fatigue design of structures under thermomechanical loadings

Éric Charkaluk , André Bignonnet , Andreï Constantinescu , Ky Dang Van
Fatigue and Fracture of Engineering Materials and Structures, 2002, 25 (12), pp.1199-1206. ⟨10.1046/j.1460-2695.2002.00612.x⟩
Article dans une revue hal-00111365 v1
Image document

Parameter Identification for lined tunnels in a viscoplastic medium

Brice Lecampion , Andrei Constantinescu , Duc Nguyen Minh
International Journal for Numerical and Analytical Methods in Geomechanics, 2002, 26 (12), pp.1191-1211. ⟨10.1002/nag.241⟩
Article dans une revue hal-00111357 v1
Image document

On the identification of elastoviscoplastic constitutive laws from indentation tests

Andreï Constantinescu , Nicolas Tardieu
Inverse Problems in Engineering, 2001, 9, pp.19-44. ⟨10.1080/174159701088027751⟩
Article dans une revue hal-00111325 v1
Image document

Field Data vs. Theoretical Model to Quantify Drilling Efficiency and Disruption

Claude Putot , Philippe Perreau , Andrei Constantinescu
SPE Drilling and Completion, 2000, 15, pp.118-124. ⟨10.2118/50579-MS⟩
Article dans une revue hal-00111303 v1
Image document

Quantifying Drilling Efficiency and Disruption: Field Data vs. Theoretical Model

Claude Putot , Jean Guesnon , Philippe Perreau , Andrei Constantinescu
SPE Drilling and Completion, 2000, 15 (02), pp.118-125. ⟨10.2118/64004-PA⟩
Article dans une revue hal-04563664 v1
Image document

An energetic approach in thermomechanical fatigue for silicium molybden cast iron

E. Charkaluk , Andreï Constantinescu
Materials at High Temperatures, 2000, 17 (3), pp.373-380. ⟨10.1179/mht.2000.17.3.001⟩
Article dans une revue hal-00111305 v1
Image document

On the determination of elastic coefficients from indentation experiments

Nicolas Tardieu , Andrei Constantinescu
Inverse Problems, 2000, 16, pp.577-588. ⟨10.1088/0266-5611/16/3/303⟩
Article dans une revue istex hal-00111300 v1
Image document

Study of the mechanical behaviour of plasma deposited silica films on polycarbonates and steel

Alfred Hofrichter , Andrei Constantinescu , Stéphane Benayoun , Pavel Bulkin , Bernard Drévillon
Journal of Vacuum Science & Technology A, 2000, 18, pp.2012-2014. ⟨10.1116/1.582464⟩
Article dans une revue hal-00111302 v1
Image document

Spatial localization of the error of constitutive law for the identification of defects in elastic bodies

Huy Duong Bui , Andreï Constantinescu
Archives of Mechanics, 2000, 52, pp.511-522
Article dans une revue hal-00111307 v1
Image document

Diffraction acoustique inverse de fissure plane: solution explicite pour un solide borné

Huy Duong Bui , Andrei Constantinescu , Hubert Maigre
Comptes rendus de l’Académie des sciences. Série IIb, Mécanique, 1999, 327, pp.971-976. ⟨10.1016/S1287-4620(00)87006-4⟩
Article dans une revue istex hal-00111628 v1
Image document

On the identification of elastic moduli from displacement-force boundary measurements

Andrei Constantinescu
Inverse Problems in Engineering, 1995, 1 (4), pp.293-313. ⟨10.1080/174159795088027587⟩
Article dans une revue hal-04568298 v1
Image document

On the inversion of subsurface residual stresses from surface stress measurements

Patrick Ballard , Andrei Constantinescu
Journal of the Mechanics and Physics of Solids, 1994, 42 (11), pp.1767-1787. ⟨10.1016/0022-5096(94)90071-X⟩
Article dans une revue hal-03824629 v1
Image document

Reciprocity gap method

Stéphane Andrieux , Hui Duong Bui , Andrei Constantinescu
Michel Grédiac; François Hild; André Pineau. Full‐Field Measurements and Identification in Solid Mechanics, Wiley-VCH, pp.368-378, 2012, 978-1-84821-294-7. ⟨10.1002/9781118578469.ch13⟩
Chapitre d'ouvrage hal-00762187 v1
Image document

Méthode de l'écart à la réciprocité

Andrei Constantinescu , Huy Duong Bui , Stéphane Andrieux
Francois Hild et Michel Grediac. Mesures de champs et identification en mécanique des solides, Lavoisier, pp.383-398, 2011
Chapitre d'ouvrage hal-00647821 v1
Image document

The Reciprocity Gap Functional for Identifying Defects and Cracks

Huy Duong Bui , Andrei Constantinescu , Hubert Maigre
Zenon Mróz; Georgios Stavroulakis. Parameter Identification of materials and structures, 469, Springer-Verlag, pp.17-54, 2005, CISM International Centre for Mechanical Sciences, 9783211381342. ⟨10.1007/3-211-38134-1_2⟩
Chapitre d'ouvrage istex hal-00112504 v1
Image document

Sur l'identification des modules elastiques

Andrei Constantinescu
Mathématiques [math]. Ecole Polytechnique X, 1994. Français. ⟨NNT : ⟩
Thèse tel-00346591 v1
Image document

Calcul des structures :problèmes d'identification et de fatigue

Andrei Constantinescu
Mécanique [physics.med-ph]. Université Pierre et Marie Curie - Paris VI, 2005
HDR tel-00346584 v1