Accéder directement au contenu

Balaji Raghavan

75
Documents

Présentation

Publications

Image document

Stress-constrained topology optimization using approximate reanalysis with on-the-fly reduced order modeling

M. Xiao , J Ma , D. Lu , B. Raghavan , W. Zhang
Advanced Modeling and Simulation in Engineering Sciences, 2022, 9 (1), pp.17. ⟨10.1186/s40323-022-00231-x⟩
Article dans une revue hal-03810665v1
Image document

Investigating the plastic anisotropy and hardening behavior of a commercial Zn-Cu-Ti alloy: Experimental and modeling approach

Ludovic Cauvin , Balaji Raghavan , Jianqiang Jin , Salima Bouvier , Xiaodong Wang
Mechanics of Materials, 2022, 164, pp.104103. ⟨10.1016/j.mechmat.2021.104103⟩
Article dans une revue hal-03464826v1

Accelerating Large-scale Topology Optimization: State-of-the-Art and Challenges

Sougata Mukherjee , Dongcheng Lu , Balaji Raghavan , Piotr Breitkopf , Subhrajit Dutta
Archives of Computational Methods in Engineering, 2021, 28 (7), pp.4549-4571. ⟨10.1007/s11831-021-09544-3⟩
Article dans une revue hal-03156201v1

Revisiting p-refinement in structural topology optimization

M. Xiao , S. Mukherjee , Balaji Raghavan , S. Dutta , Piotr Breitkopf
Structures, 2021, 34, pp.3640-3646. ⟨10.1016/j.istruc.2021.09.078⟩
Article dans une revue hal-03420583v1
Image document

On-the-fly model reduction for large-scale structural topology optimization using principal components analysis

Manyu Xiao , Dongcheng Lu , Piotr Breitkopf , Balaji Raghavan , Subhrajit Dutta
Structural and Multidisciplinary Optimization, 2020, 62 (1), pp.209-230. ⟨10.1007/s00158-019-02485-3⟩
Article dans une revue hal-02531425v1

Multi-grid reduced-order topology optimization

Manyu Xiao , Dongcheng Lu , Piotr Breitkopf , Balaji Raghavan , Weihong Zhang
Structural and Multidisciplinary Optimization, 2020, 61 (6), pp.1-23. ⟨10.1007/s00158-020-02570-y⟩
Article dans une revue hal-02797074v1
Image document

On the study of mystical materials identified by indentation on power law and Voce hardening solids

L. Meng , P. Breitkopf , Balaji Raghavan , Gerard Mauvoisin , Olivier Bartier
International Journal of Material Forming, 2019, 12 (4), pp.587-602. ⟨10.1007/s12289-018-1436-1⟩
Article dans une revue hal-01884269v1
Image document

Diffuse manifold learning of the geometry of woven reinforcements in composites

Anna Madra , Piotr Breitkopf , Balaji Raghavan , François Trochu
Comptes Rendus Mécanique, 2018, 346 (7), pp.532-538. ⟨10.1016/j.crme.2018.04.008⟩
Article dans une revue hal-01789216v1
Image document

Multi-scale investigation of highly anisotropic zinc alloys using crystal plasticity and inverse analysis

Ludovic Cauvin , Balaji Raghavan , Salima Bouvier , Xiaodong Wang , Fodil Meraghni
Materials Science and Engineering: A, 2018, 729, pp.106-118. ⟨10.1016/j.msea.2018.05.038⟩
Article dans une revue hal-01797288v1

Nonlinear Shape-Manifold Learning Approach: Concepts, Tools and Applications

Liang Meng , Piotr Breitkopf , Guenhael Le Quilliec , Balaji Raghavan , Pierre Villon
Archives of Computational Methods in Engineering, 2018, 25 (1), pp.1. ⟨10.1007/s11831-016-9189-9⟩
Article dans une revue hal-01362497v1

Towards surrogate modeling of material microstructures through the processing variables

Liang Xia , Balaji Raghavan , Piotr Breitkopf
Applied Mathematics and Computation, 2017, 294, pp.157-168. ⟨10.1016/j.amc.2016.08.056⟩
Article dans une revue hal-01358149v1
Image document

An objective meta-modeling approach for indentation-based material characterization

Liang Meng , Balaji Raghavan , Olivier Bartier , Xavier Hernot , Gerard Mauvoisin
Mechanics of Materials, 2017, 107, pp.31-44. ⟨10.1016/j.mechmat.2017.01.011⟩
Article dans une revue hal-01451417v1
Image document

Combined meso-scale modeling and experimental investigation of the effect of mechanical damage on the transport properties of cementitious composites

Balaji Raghavan , Davood Niknezhad , Fabrice Bernard , Siham Kamali-Bernard
Journal of Physics and Chemistry of Solids, 2016, 96-97, pp.22-37. ⟨10.1016/j.jpcs.2016.04.013⟩
Article dans une revue hal-01309703v1
Image document

Effect of different types of fibers on the microstructure and the mechanical behavior of Ultra-High Performance Fiber-Reinforced Concretes

Kinda Hannawi , Hui Bian , William Prince-Agbodjan , Balaji Raghavan
Composites Part B: Engineering, 2016, 86, pp.214-220. ⟨10.1016/j.compositesb.2015.09.059⟩
Article dans une revue hal-01225594v1
Image document

Identification of material properties using indentation test and shape manifold learning approach

Liang Meng , Piotr Breitkopf , Balaji Raghavan , Gerard Mauvoisin , Olivier Bartier
Computer Methods in Applied Mechanics and Engineering, 2015, 297, pp.239-257. ⟨10.1016/j.cma.2015.09.004⟩
Article dans une revue hal-01196746v1

A manifold learning-based reduced order model for springback shape characterization and optimization in sheet metal forming

Guenhael Le Quilliec , Balaji Raghavan , Piotr Breitkopf
Computer Methods in Applied Mechanics and Engineering, 2015, 285, pp.621-638. ⟨10.1016/j.cma.2014.11.029⟩
Article dans une revue hal-01101335v1

Towards a realistic morphological model for the meso-scale mechanical and transport behavior of cementitious composites

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
Composites Part B: Engineering, 2015, 81, pp.72-83. ⟨10.1016/j.compositesb.2015.06.024⟩
Article dans une revue hal-01174842v1

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

Balaji Raghavan , Guenhael Le Quilliec , Piotr Breitkopf , Alain Rassineux , Pierre Villon
International Journal of Material Forming, 2014, 7 (4), pp.487-501. ⟨10.1007/s12289-013-1145-8⟩
Article dans une revue hal-00978587v1

Editorial: High-Performance Computing Strategies for Complex Engineering Optimization Problems

Gongnan Xie , Massimo Scalia , Masoud Rokni , Balaji Raghavan , Manyu Xiao
Mathematical Problems in Engineering, 2014, 2014, pp.734863. ⟨10.1155/2014/734863⟩
Article dans une revue hal-01113010v1

Asynchronous evolutionary shape optimization based on high-quality surrogates: application to an air-conditioning duct

Balaji Raghavan , Piotr Breitkopf
Engineering with Computers, 2013, 29 (4), pp.467-476. ⟨10.1007/s00366-012-0263-0⟩
Article dans une revue hal-01994233v1

Numerical material representation using proper orthogonal decomposition and diffuse approximation

Liang Xia , Balaji Raghavan , Manyu Xiao , Piotr Breitkopf , Rajan Filomeno Coelho
Applied Mathematics and Computation, 2013, 224, pp.450-462. ⟨10.1016/j.amc.2013.08.052⟩
Article dans une revue hal-01993134v1

A bi-level meta-modeling approach for structural optimization using modified POD bases and Diffuse Approximation

Balaji Raghavan , Mohamed Hamdaoui , Manyu Xiao , Piotr Breitkopf , Pierre Villon
Computers & Structures, 2013, 127, pp.19-28. ⟨10.1016/j.compstruc.2012.06.008⟩
Article dans une revue hal-00982710v1

Towards a space reduction approach for efficient structural shape optimization

Balaji Raghavan , Piotr Breitkopf , Yves Tourbier , Pierre Villon
Structural and Multidisciplinary Optimization, 2013, 48 (5), pp.987-1000. ⟨10.1007/s00158-013-0942-5⟩
Article dans une revue hal-01994229v1
Image document

Towards simultaneous reduction of both input and output spaces for interactive simulation-based structural design

Balaji Raghavan , Liang Xia , Piotr Breitkopf , Pierre Villon
Computer Methods in Applied Mechanics and Engineering, 2013, 265, pp.174-185. ⟨10.1016/j.cma.2013.06.010⟩
Article dans une revue hal-00977903v1

Implicit constraint handling for shape optimisation with POD-morphing

Balaji Raghavan , Manyu Xiao , Piotr Breitkopf , Pierre Villon
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2012, 21 (3-6), pp.325-336. ⟨10.1080/17797179.2012.719316⟩
Article dans une revue hal-01994237v1

POD-morphing, an a posteriori grid parametrization method for shape optimization

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2012, 19 (5-7), pp.671-697. ⟨10.3166/ejcm.19.671-697⟩
Article dans une revue hal-00982746v1

Topology optimization of 2D continua for minimum compliance using parallel computing

Balaji Raghavan , Arash Mahdavi , Eric Mockensturm , Mary Frecker
Structural and Multidisciplinary Optimization, 2006, 32 (2), pp.121-132. ⟨10.1007/s00158-006-0006-1⟩
Article dans une revue hal-00982735v1

Dynamic analysis of a front-end accessory drive with a decoupler/isolator

Balaji Raghavan , Eric Mockensturm
International Journal of Vehicle Design, 2005, 39 (3), pp.208-231. ⟨10.1504/IJVD.2005.008472⟩
Article dans une revue hal-00982674v1

Piece-Wise Linear Dynamic Systems With One-Way Clutches

Balaji Raghavan , Eric Mockensturm
Journal of Vibration and Acoustics Transactions of the ASME, 2004, 127, pp.475-482. ⟨10.1115/1.1897737⟩
Article dans une revue hal-00982728v1
Image document

Reduced-Order Polycrystalline Texture Representation

Jianqiang Jin , Piotr Breitkopf , Ludovic Cauvin , Agathe Leclerc , Bingqian Li
XVII International Conference on Computational Plasticity, COMPLAS 2023, Sep 2023, Barcelona, Spain
Communication dans un congrès hal-04404002v1
Image document

Model reduction in the context of polycrystalline plasticity

Bingqian Li , Piotr Breitkopf , Ludovic Cauvin , Balaji Raghavan
MORTech 2023 – 6th International Workshop on Model Reduction Techniques, Nov 2023, Paris-Saclay, France
Communication dans un congrès hal-04403924v1

An application of Reduced-Order Model for polycrystalline plasticity

Bingqian Li , Jianqiang Jin , Ludovic Cauvin , Balaji Raghavan , Piotr Breitkopf
NPU-UTC Bilateral Symposium on Data-driven Simulation, Nov 2023, Xi'An, China
Communication dans un congrès hal-04404373v1
Image document

A NEW MODELING STRATEGY ACCOUNTING FOR MATERIAL TEXTURE

Jianqiang Jin , Ludovic Cauvin , Mariana Mayer Grigoleto , Balaji Raghavan , Piotr Breitkopf
6th International Conference on Multi-scale Computational Methods for Solids and Fluids, Jun 2023, Sarajevo, Bosnia and Herzegovina
Communication dans un congrès hal-04404030v1

Using a Reduced-Order Modeling strategy for accounting for texture information in the context of polycrystalline plasticity

Bingqian Li , Jianqiang Jin , Ludovic Cauvin , Balaji Raghavan , Piotr Breitkopf
2023 International Conference on the Cooperation and Integration of Industry, Education, Research and Application, Nov 2023, Wuhan, China
Communication dans un congrès hal-04404368v1
Image document

Vers un paradigme d'apprentissage de variété pour la caractérisation de l'anisotropie plastique dans des métaux et des alliages métalliques

Jianqiang Jin , Ludovic Cauvin , Balaji Raghavan , Piotr Breitkopf , Salima Bouvier
15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France
Communication dans un congrès hal-03717743v1

Topology Optimization of Structures Using Higher Order Finite Elements in Analysis

S. Mukherjee , D. Lu , S. Dutta , Balaji Raghavan , Piotr Breitkopf
International Conference on Modeling, Simulation and Optimization, CoMSO 2020, Aug 2020, Assam, India. pp.791-800, ⟨10.1007/978-981-15-9829-6_61⟩
Communication dans un congrès hal-03249937v1

Multi-scale characterization of highly anisotropic polycrystalline materials

Balaji Raghavan , Ludovic Cauvin , Salima Bouvier , Piotr Breitkopf , Fodil Meraghni
39th Ibero-Latin-American Congress on Computational Methods in Engineering, Nov 2018, Compiègne, France
Communication dans un congrès hal-04404361v1
Image document

On the uniqueness of the elastoplastic properties identified from the indentation test on materials following the Vocé hardening law

Liang Meng , Piotr Breitkopf , Balaji Raghavan , Olivier Bartier , Xavier Hernot
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Communication dans un congrès hal-01922520v1
Image document

Characterizing the mechanical and transport coupling in self-compacting concrete Part I: morphological mechanical and boundary conditions modeling at the meso-scale

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
34èmes Rencontres de l’AUGC, May 2016, Liège, Belgium
Communication dans un congrès hal-01516739v1

Characterizing the mechanical and transport coupling in self-compacting concrete Part II: comparing damaged permeability calculations with experimental results

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
34èmes Rencontres de l’AUGC, Association Universitaire du Génie Civil, May 2016, Liège, Belgique
Communication dans un congrès hal-01373540v1

Vers une approche objective pour l'identification des paramètres mécaniques basée sur l'interpolation d'empreinte.

Liang Meng , Balaji Raghavan , Olivier Bartier , Gerard Mauvoisin , Xavier Hernot
Colloque Indentation 2016, Groupe d'Indentation Multi Echelle Nord Pas-de-Calais, Oct 2016, Lille, France
Communication dans un congrès hal-01371342v1

Simulation numérique de la résistance résiduelle, aux essais d'arrachement (Pull-out), de l'interface acier béton aux hautes températures

M. Taj , Kinda Hannawi , Balaji Raghavan , William Prince-Agbodjan , M. Zenasni
conférence internationale : Les matériaux innovants et leurs applications, 2016, Oujda, Morocco
Communication dans un congrès hal-02425666v1

Characterizing the mechanical and transport coupling in self-compacting concrete Part I: morphological mechanical and boundary conditions modeling at the meso-scale.

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
34èmes Rencontres de l’AUGC, May 2016, Liège, Belgium
Communication dans un congrès hal-01373539v1

Identification of Material Parameters Using Indentation Test and Manifold Learning Approach

Liang Meng , Piotr Breitkopf , Balaji Raghavan , Gerard Mauvoisin , Olivier Bartier
The 16th International Conference Metal Forming 2016, AGH University of Science and Technology, Kraków, Poland, Sep 2016, Krakovie, Poland
Communication dans un congrès hal-01373544v1

Optimization by Shape Manifold Based on Level Set Interpolation Applied to Deep Drawing Applications

Guenhael Le Quilliec , Balaji Raghavan , Piotr Breitkopf
The 16th International Conference Metal Forming 2016, AGH University of Science and Technology, Kraków, Poland, Sep 2016, Krakovie, Poland
Communication dans un congrès hal-01373543v1

Shape Optimization in Metal Forming Applications Based on the Shape-Manifold Approach

Guenhael Le Quilliec , Balaji Raghavan , Piotr Breitkopf
NUMIFORM 2016 - The 12th International Conference on Numerical Methods in Industrial Forming Processes, University of Technology of Troyes, Troyes, France, Jul 2016, Troyes, France
Communication dans un congrès hal-01382209v1

The influence of aggregate shape, volume fraction and segregation on the performance of Self-Compacting Concrete : 3D modeling and simulation

Davood Niknezhad , Raghavan Balaji , Fabrice Bernard , Siham Kamali-Bernard
33èmes rencontres universitaires de Génie Civil, May 2015, bayonne, France
Communication dans un congrès hal-01162016v1
Image document

A shape manifold learning approach for indentation-based identification of material properties

Liang Meng , Piotr Breitkopf , Balaji Raghavan , Olivier Bartier , Xavier Hernot
12e colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01400448v1

Simulation numérique de la résistance résiduelle à la compression du béton aux hautes températures

Mourad Taj , Kinda Hannawi , Balaji Raghavan , William Prince
12ème Congrès de Mécanique, Apr 2015, Casablanca, Morocco
Communication dans un congrès hal-01119303v1
Image document

Réduction de modèle basée sur l'apprentissage par variété appliquée à l'optimisation du procédé d'emboutissage

Guénhaël Le Quilliec , Balaji Raghavan , Piotr Breitkopf
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01516441v1

Simulation numérique 3D d’un BAP : étude de l’influence de la ségrégation et de la morphologie des granulats sur les comportements en traction et en compression

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
Rencontres Universitaires de Génie Civil 2015, AUGC: Association Universitaires de Génie Civil, May 2015, Pau, France
Communication dans un congrès hal-01113089v1
Image document

The influence of aggregate shape, volume fraction and segregationon the performance of Self-Compacting Concrete :3D modeling and simulation

Davood Niknezhad , Balaji Raghavan , Fabrice Bernard , Siham Kamali-Bernard
Rencontres Universitaires de Génie Civil, May 2015, Bayonne, France
Communication dans un congrès hal-01167616v1

Shape Manifold Approach for Reduced Order Modeling in Optimization, Springback Quantification and Inverse Analysis

Piotr Breitkopf , Liang Meng , Guenhael Le Quilliec , Balaji Raghavan , Pierre Villon
Workshop: Reduced Basis, POD and PGD Model Reduction Techniques, Nov 2015, Cachan, France
Communication dans un congrès hal-01333196v1

Reduced order modeling for design optimization-with applications to metal forming and inverse problems

Piotr Breitkopf , Liang Meng , Guenhael Le Quilliec , Balaji Raghavan , Pierre Villon
2015 European Altair Technology Conference, Sep 2015, Paris, France
Communication dans un congrès hal-01333185v1

Réduction de modèle basée sur l’apprentissage par variété appliquée à l’optimisation du procédé d’emboutissage

Guenhael Le Quilliec , Balaji Raghavan , Piotr Breitkopf
CSMA 2015: 12me Colloque National en Calcul des Structures, CSMA, May 2015, Presqu'ile de Giens, France
Communication dans un congrès hal-01113046v1
Image document

Identification of material properties with indentation test and shape manifold learning approach

Liang Meng , Piotr Breitkopf , Balaji Raghavan , Olivier Bartier , Xavier Hernot
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01515066v1

Simulation de la résistance résiduelle à la compression d’un béton exposé aux hautes températures

Mourad Taj , Kinda Hannawi , Balaji Raghavan , William Prince-Agbodjan , Mohamed Zenasni
12me Congres de Mecanique, La Société Marocaine des Sciences Mécaniques, Le Réseau Universitaire de Mécanique, Apr 2015, Casablanca, Morocco
Communication dans un congrès hal-01115155v1

Springback assessment based on level set interpolation and shape manifolds in deep drawing

Guenhael Le Quilliec , Balaji Raghavan , Piotr Breitkopf , Alain Rassineux , Pierre Villon
NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Jan 2014, Melbourne, Australia. pp.748-751, ⟨10.1063/1.4850079⟩
Communication dans un congrès hal-00984418v1
Image document

Simultaneous meta-modeling for both input and output spaces for rapid design space exploration in structural shape optimization

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717026v1
Image document

Towards simultaneous meta-modeling for both the output and input spaces in the context of design shape optimization using asynchronous high-performance computing

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
2nd ECCOMAS Young Investigators Conference (YIC 2013), Sep 2013, Bordeaux, France
Communication dans un congrès hal-00855842v1

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

Balaji Raghavan , Piotr Breitkopf , Guenhael Le Quilliec
3rd African Conference on Computational Mechanics, AfriCOMP'13, Jul 2013, Livingstone, Zambia
Communication dans un congrès hal-00984766v1
Image document

Toward parameterization of material microstructure based on a bi-level reduced model

Liang Xia , Balaji Raghavan , Piotr Breitkopf
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717843v1

A POD/PGD reduction approach for an efficient reparameterization of data-driven material microstructure models

Liang Xia , Balaji Raghavan , Piotr Breitkopf , Weihong Zhang
20th Conference on Computer Methods in Materials Technology, ECCOMAS KomPlasTech 2013, Jan 2013, Zakopane, Poland. pp.219-225
Communication dans un congrès hal-00984659v1

Numerical material representation using proper orthogonal decomposition and diffuse approximation

Liang Xia , Balaji Raghavan , Piotr Breitkopf , Weihong Zhang
Third International Conference on Material Modelling incorporating the Thirteenth European Mechanics of Materials Conference, Sep 2013, Paris ( France), France. pp.NC
Communication dans un congrès hal-00984762v1

Towards simultaneous meta-modeling for both the output and input spaces for interactive simulation-based structural design

Piotr Breitkopf , Pierre Villon , Balaji Raghavan , Liang Xia
RB-POD-PGD : 2nd International Workshop on Reduced Basis, POD and PGD model, Nov 2013, Blois, France. pp.NC
Communication dans un congrès hal-00984612v1

A REPARAMETERIZATION APPROACH FOR REDUCING DIMENSIONALITY IN SHAPE optimization

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures, Apr 2012, Sarajevo, Bosnia and Herzegovina. pp.NC
Communication dans un congrès hal-00985093v1

A REPARAMETERIZATION APPROACH FOR REDUCING DIMENSIONALITY IN SHAPE optimization

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
WCCM X: 10th World Congress on Computational Mechanics, Jul 2012, Sao Paolo, Brazil. pp.NC
Communication dans un congrès hal-00984768v1

Towards a reduced order modeling approach for efficient structural shape optimization

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Sep 2012, Vienna, Austria. pp.NC
Communication dans un congrès hal-00984771v1
Image document

POD Morphing: une méthode de reparamétrage a posteriori des formes maillées pour l optimisation de forme des structures

Balaji Raghavan , Piotr Breitkopf , Pierre Villon
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592955v1

Pod-morphing : application to the optimization of an air-conditioning duct

Balaji Raghavan , Manyu Xiao , Piotr Breitkopf , Pierre Villon
EUROGEN 11: 9th International conference on evolutionary and deterministic methods for design, optimization and control with applications to industrial and societal problems, Capua, Italy, Sep 2011, Capua, Italy. pp.NC
Communication dans un congrès hal-00985085v1

Programming paradigms for parallel finite element analysis and structural optimization

Balaji Raghavan , Piotr Breitkopf , Catherine Knopf-Lenoir
ECCM 2010: 4th European Conference on Computational Mechanics, May 2010, Paris, France. pp.NC
Communication dans un congrès hal-00985075v1

Surrogate models based on constrained POD for optimization

Manyu Xiao , Balaji Raghavan , Piotr Breitkopf , Catherine Knopf-Lenoir
ECCM 2010: 4th European Conference on Computational Mechanics, May 2010, Paris, France. pp.NC
Communication dans un congrès hal-00985078v1

Mechanics of Rotating Wound Rolls

Balaji Raghavan , Eric Mockensturm
ASME 2006 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Nov 2006, Chicago, Illinois, United States. pp.503-512, ⟨10.1115/IMECE2006-16238⟩
Communication dans un congrès hal-01113544v1

Parallel Optimality Criteria-based Topology Optimization for minimum Compliance Design

Balaji Raghavan , Mary Frecker , Arash Mahdavi , Eric Mockensturm
WCSMO6: 6th World Congress of Structural and Multidisciplinary Optimization, May 2005, Rie de Janeiro, Brazil. pp.NC
Communication dans un congrès hal-00985114v1

Dynamic Analysis of a Serpentine Belt Drive With a Decoupler/Isolator

Balaji Raghavan , Eric Mockensturm
ASME 2004 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Nov 2004, Anaheim, California, United States. pp.291-303, ⟨10.1115/IMECE2004-61662⟩
Communication dans un congrès hal-01113735v1