Balaji Raghavan

Présentation

Publications

Article dans une revue (30)

Towards a data-driven paradigm for characterizing plastic anisotropy using principal components analysis and manifold learning Jianqiang Jin,Ludovic Cauvin,Balaji Raghavan,Piotr Breitkopf,Subhrajit Duttaet al. Computational Materials Science, 2024, 235, pp.112834. ⟨10.1016/j.commatsci.2024.112834⟩ Article dans une revue hal-04445491v1
Stress-constrained topology optimization using approximate reanalysis with on-the-fly reduced order modeling M. Xiao,J Ma,D. Lu,B. Raghavan,W. Zhang Advanced Modeling and Simulation in Engineering Sciences, 2022, 9 (1), pp.17. ⟨10.1186/s40323-022-00231-x⟩ Article dans une revue hal-03810665v1
Investigating the plastic anisotropy and hardening behavior of a commercial Zn-Cu-Ti alloy: Experimental and modeling approach Ludovic Cauvin,Balaji Raghavan,Jianqiang Jin,Salima Bouvier,Xiaodong Wanget al. Mechanics of Materials, 2022, 164, pp.104103. ⟨10.1016/j.mechmat.2021.104103⟩ Article dans une revue hal-03464826v1
Revisiting p-refinement in structural topology optimization M. Xiao,S. Mukherjee,Balaji Raghavan,S. Dutta,Piotr Breitkopfet al. Structures, 2021, 34, pp.3640-3646. ⟨10.1016/j.istruc.2021.09.078⟩ Article dans une revue hal-03420583v1
Accelerating Large-scale Topology Optimization: State-of-the-Art and Challenges Sougata Mukherjee,Dongcheng Lu,Balaji Raghavan,Piotr Breitkopf,Subhrajit Duttaet al. Archives of Computational Methods in Engineering, 2021, 28 (7), pp.4549-4571. ⟨10.1007/s11831-021-09544-3⟩ Article dans une revue hal-03156201v1
Multi-grid reduced-order topology optimization Manyu Xiao,Dongcheng Lu,Piotr Breitkopf,Balaji Raghavan,Weihong Zhanget al. Structural and Multidisciplinary Optimization, 2020, 61 (6), pp.1-23. ⟨10.1007/s00158-020-02570-y⟩ Article dans une revue hal-02797074v1
On-the-fly model reduction for large-scale structural topology optimization using principal components analysis Manyu Xiao,Dongcheng Lu,Piotr Breitkopf,Balaji Raghavan,Subhrajit Duttaet al. Structural and Multidisciplinary Optimization, 2020, 62 (1), pp.209-230. ⟨10.1007/s00158-019-02485-3⟩ Article dans une revue hal-02531425v1
On the study of mystical materials identified by indentation on power law and Voce hardening solids L. Meng,P. Breitkopf,Balaji Raghavan,Gerard Mauvoisin,Olivier Bartieret al. International Journal of Material Forming, 2019, 12 (4), pp.587-602. ⟨10.1007/s12289-018-1436-1⟩ Article dans une revue hal-01884269v1
Multi-scale investigation of highly anisotropic zinc alloys using crystal plasticity and inverse analysis Ludovic Cauvin,Balaji Raghavan,Salima Bouvier,Xiaodong Wang,Fodil Meraghni Materials Science and Engineering: A, 2018, 729, pp.106-118. ⟨10.1016/j.msea.2018.05.038⟩ Article dans une revue hal-01797288v1
Nonlinear Shape-Manifold Learning Approach: Concepts, Tools and Applications Liang Meng,Piotr Breitkopf,Guenhael Le Quilliec,Balaji Raghavan,Pierre Villon Archives of Computational Methods in Engineering, 2018, 25 (1), pp.1. ⟨10.1007/s11831-016-9189-9⟩ Article dans une revue hal-01362497v1
Diffuse manifold learning of the geometry of woven reinforcements in composites Anna Madra,Piotr Breitkopf,Balaji Raghavan,François Trochu Comptes Rendus. Mécanique, 2018, 346 (7), pp.532-538. ⟨10.1016/j.crme.2018.04.008⟩ Article dans une revue hal-01789216v1
Towards surrogate modeling of material microstructures through the processing variables Liang Xia,Balaji Raghavan,Piotr Breitkopf Applied Mathematics and Computation, 2017, 294, pp.157-168. ⟨10.1016/j.amc.2016.08.056⟩ Article dans une revue hal-01358149v1
An objective meta-modeling approach for indentation-based material characterization Liang Meng,Balaji Raghavan,Olivier Bartier,Xavier Hernot,Gerard Mauvoisinet al. Mechanics of Materials, 2017, 107, pp.31-44. ⟨10.1016/j.mechmat.2017.01.011⟩ Article dans une revue hal-01451417v1
Combined meso-scale modeling and experimental investigation of the effect of mechanical damage on the transport properties of cementitious composites Balaji Raghavan,Davood Niknezhad,Fabrice Bernard,Siham Kamali-Bernard Journal of Physics and Chemistry of Solids, 2016, 96-97, pp.22-37. ⟨10.1016/j.jpcs.2016.04.013⟩ Article dans une revue hal-01309703v1
Effect of different types of fibers on the microstructure and the mechanical behavior of Ultra-High Performance Fiber-Reinforced Concretes Kinda Hannawi,Hui Bian,William Prince-Agbodjan,Balaji Raghavan Composites Part B: Engineering, 2016, 86, pp.214-220. ⟨10.1016/j.compositesb.2015.09.059⟩ Article dans une revue hal-01225594v1
Towards a realistic morphological model for the meso-scale mechanical and transport behavior of cementitious composites Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard Composites Part B: Engineering, 2015, 81, pp.72-83. ⟨10.1016/j.compositesb.2015.06.024⟩ Article dans une revue hal-01174842v1
Identification of material properties using indentation test and shape manifold learning approach Liang Meng,Piotr Breitkopf,Balaji Raghavan,Gerard Mauvoisin,Olivier Bartieret al. Computer Methods in Applied Mechanics and Engineering, 2015, 297, pp.239-257. ⟨10.1016/j.cma.2015.09.004⟩ Article dans une revue hal-01196746v1
A manifold learning-based reduced order model for springback shape characterization and optimization in sheet metal forming Guenhael Le Quilliec,Balaji Raghavan,Piotr Breitkopf Computer Methods in Applied Mechanics and Engineering, 2015, 285, pp.621-638. ⟨10.1016/j.cma.2014.11.029⟩ Article dans une revue istex hal-01101335v1
Editorial: High-Performance Computing Strategies for Complex Engineering Optimization Problems Gongnan Xie,Massimo Scalia,Masoud Rokni,Balaji Raghavan,Manyu Xiao Mathematical Problems in Engineering, 2014, 2014, pp.734863. ⟨10.1155/2014/734863⟩ Article dans une revue hal-01113010v1
Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds Balaji Raghavan,Guenhael Le Quilliec,Piotr Breitkopf,Alain Rassineux,Pierre Villonet al. International Journal of Material Forming, 2014, 7 (4), pp.487-501. ⟨10.1007/s12289-013-1145-8⟩ Article dans une revue hal-00978587v1
Numerical material representation using proper orthogonal decomposition and diffuse approximation Liang Xia,Balaji Raghavan,Piotr Breitkopf,Weihong Zhang Applied Mathematics and Computation, 2013, 224, pp.450-462. ⟨10.1016/j.amc.2013.08.052⟩ Article dans une revue istex hal-01993134v1
Asynchronous evolutionary shape optimization based on high-quality surrogates: application to an air-conditioning duct Balaji Raghavan,Piotr Breitkopf Engineering with Computers, 2013, 29 (4), pp.467-476. ⟨10.1007/s00366-012-0263-0⟩ Article dans une revue istex hal-01994233v1
Towards simultaneous reduction of both input and output spaces for interactive simulation-based structural design Balaji Raghavan,Liang Xia,Piotr Breitkopf,Pierre Villon Computer Methods in Applied Mechanics and Engineering, 2013, 265, pp.174-185. ⟨10.1016/j.cma.2013.06.010⟩ Article dans une revue hal-00977903v1
Towards a space reduction approach for efficient structural shape optimization Balaji Raghavan,Piotr Breitkopf,Yves Tourbier,Pierre Villon Structural and Multidisciplinary Optimization, 2013, 48 (5), pp.987-1000. ⟨10.1007/s00158-013-0942-5⟩ Article dans une revue istex hal-01994229v1
A bi-level meta-modeling approach for structural optimization using modified POD bases and Diffuse Approximation Balaji Raghavan,Mohamed Hamdaoui,Manyu Xiao,Piotr Breitkopf,Pierre Villon Computers & Structures, 2013, 127, pp.19-28. ⟨10.1016/j.compstruc.2012.06.008⟩ Article dans une revue istex hal-00982710v1
POD-morphing, an a posteriori grid parametrization method for shape optimization Balaji Raghavan,Piotr Breitkopf,Pierre Villon Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2012, 19 (5-7), pp.671-697. ⟨10.3166/ejcm.19.671-697⟩ Article dans une revue hal-00982746v1
Implicit constraint handling for shape optimisation with POD-morphing Balaji Raghavan,Manyu Xiao,Piotr Breitkopf,Pierre Villon Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2012, 21 (3-6), pp.325-336. ⟨10.1080/17797179.2012.719316⟩ Article dans une revue hal-01994237v1
Topology optimization of 2D continua for minimum compliance using parallel computing Balaji Raghavan,Arash Mahdavi,Eric Mockensturm,Mary Frecker Structural and Multidisciplinary Optimization, 2006, 32 (2), pp.121-132. ⟨10.1007/s00158-006-0006-1⟩ Article dans une revue istex hal-00982735v1
Dynamic analysis of a front-end accessory drive with a decoupler/isolator Balaji Raghavan,Eric Mockensturm International Journal of Vehicle Design, 2005, 39 (3), pp.208-231. ⟨10.1504/IJVD.2005.008472⟩ Article dans une revue hal-00982674v1
Piece-Wise Linear Dynamic Systems With One-Way Clutches Balaji Raghavan,Eric Mockensturm Journal of Vibration and Acoustics Transactions of the ASME, 2004, 127, pp.475-482. ⟨10.1115/1.1897737⟩ Article dans une revue hal-00982728v1

Communication dans un congrès (46)

An application of Reduced-Order Model for polycrystalline plasticity Bingqian Li,Jianqiang Jin,Ludovic Cauvin,Balaji Raghavan,Piotr Breitkopf NPU-UTC Bilateral Symposium on Data-driven Simulation, Nov 2023, Xi'An, China Communication dans un congrès hal-04404373v1
Model reduction in the context of polycrystalline plasticity Bingqian Li,Piotr Breitkopf,Ludovic Cauvin,Balaji Raghavan MORTech 2023 – 6th International Workshop on Model Reduction Techniques, Nov 2023, Paris-Saclay, France Communication dans un congrès hal-04403924v1
Using a Reduced-Order Modeling strategy for accounting for texture information in the context of polycrystalline plasticity Bingqian Li,Jianqiang Jin,Ludovic Cauvin,Balaji Raghavan,Piotr Breitkopf 2023 International Conference on the Cooperation and Integration of Industry, Education, Research and Application, Nov 2023, Wuhan, China Communication dans un congrès hal-04404368v1
A NEW MODELING STRATEGY ACCOUNTING FOR MATERIAL TEXTURE Jianqiang Jin,Ludovic Cauvin,Mariana Mayer Grigoleto,Balaji Raghavan,Piotr Breitkopf 6th International Conference on Multi-scale Computational Methods for Solids and Fluids, Jun 2023, Sarajevo, Bosnia and Herzegovina Communication dans un congrès hal-04404030v1
Reduced-Order Polycrystalline Texture Representation Jianqiang Jin,Piotr Breitkopf,Ludovic Cauvin,Agathe Leclerc,Bingqian Liet al. XVII International Conference on Computational Plasticity, COMPLAS 2023, Sep 2023, Barcelona, Spain Communication dans un congrès hal-04404002v1
Vers un paradigme d'apprentissage de variété pour la caractérisation de l'anisotropie plastique dans des métaux et des alliages métalliques Jianqiang Jin,Ludovic Cauvin,Balaji Raghavan,Piotr Breitkopf,Salima Bouvier 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France Communication dans un congrès hal-03717743v1
Topology Optimization of Structures Using Higher Order Finite Elements in Analysis S. Mukherjee,D. Lu,S. Dutta,Balaji Raghavan,Piotr Breitkopfet al. International Conference on Modeling, Simulation and Optimization, CoMSO 2020, Aug 2020, Assam, India. pp.791-800, ⟨10.1007/978-981-15-9829-6_61⟩ Communication dans un congrès hal-03249937v1
Multi-scale characterization of highly anisotropic polycrystalline materials Balaji Raghavan,Ludovic Cauvin,Salima Bouvier,Piotr Breitkopf,Fodil Meraghni 39th Ibero-Latin-American Congress on Computational Methods in Engineering, Nov 2018, Compiègne, France Communication dans un congrès hal-04404361v1
On the uniqueness of the elastoplastic properties identified from the indentation test on materials following the Vocé hardening law Liang Meng,Piotr Breitkopf,Balaji Raghavan,Olivier Bartier,Xavier Hernotet al. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01922520v1
Identification of Material Parameters Using Indentation Test and Manifold Learning Approach Liang Meng,Piotr Breitkopf,Balaji Raghavan,Gerard Mauvoisin,Olivier Bartieret al. The 16th International Conference Metal Forming 2016, AGH University of Science and Technology, Kraków, Poland, Sep 2016, Krakovie, Poland Communication dans un congrès hal-01373544v1
Optimization by Shape Manifold Based on Level Set Interpolation Applied to Deep Drawing Applications Guenhael Le Quilliec,Balaji Raghavan,Piotr Breitkopf The 16th International Conference Metal Forming 2016, AGH University of Science and Technology, Kraków, Poland, Sep 2016, Krakovie, Poland Communication dans un congrès hal-01373543v1
Characterizing the mechanical and transport coupling in self-compacting concrete Part I: morphological mechanical and boundary conditions modeling at the meso-scale Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard 34èmes Rencontres de l’AUGC, May 2016, Liège, Belgium Communication dans un congrès hal-01516739v1
Shape Optimization in Metal Forming Applications Based on the Shape-Manifold Approach Guenhael Le Quilliec,Balaji Raghavan,Piotr Breitkopf NUMIFORM 2016 - The 12th International Conference on Numerical Methods in Industrial Forming Processes, University of Technology of Troyes, Troyes, France, Jul 2016, Troyes, France Communication dans un congrès hal-01382209v1
Vers une approche objective pour l'identification des paramètres mécaniques basée sur l'interpolation d'empreinte. Liang Meng,Balaji Raghavan,Olivier Bartier,Gerard Mauvoisin,Xavier Hernotet al. Colloque Indentation 2016, Groupe d'Indentation Multi Echelle Nord Pas-de-Calais, Oct 2016, Lille, France Communication dans un congrès hal-01371342v1
Characterizing the mechanical and transport coupling in self-compacting concrete Part II: comparing damaged permeability calculations with experimental results Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard 34èmes Rencontres de l’AUGC, Association Universitaire du Génie Civil, May 2016, Liège, Belgique Communication dans un congrès hal-01373540v1
Simulation numérique de la résistance résiduelle, aux essais d'arrachement (Pull-out), de l'interface acier béton aux hautes températures M. Taj,Kinda Hannawi,Balaji Raghavan,William Prince-Agbodjan,M. Zenasni conférence internationale : Les matériaux innovants et leurs applications, 2016, Oujda, Morocco Communication dans un congrès hal-02425666v1
Characterizing the mechanical and transport coupling in self-compacting concrete Part I: morphological mechanical and boundary conditions modeling at the meso-scale. Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard 34èmes Rencontres de l’AUGC, May 2016, Liège, Belgium Communication dans un congrès hal-01373539v1
The influence of aggregate shape, volume fraction and segregationon the performance of Self-Compacting Concrete :3D modeling and simulation Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard Rencontres Universitaires de Génie Civil, May 2015, Bayonne, France Communication dans un congrès hal-01167616v1
Réduction de modèle basée sur l'apprentissage par variété appliquée à l'optimisation du procédé d'emboutissage Guénhaël Le Quilliec,Balaji Raghavan,Piotr Breitkopf 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01516441v1
Shape Manifold Approach for Reduced Order Modeling in Optimization, Springback Quantification and Inverse Analysis Piotr Breitkopf,Liang Meng,Guenhael Le Quilliec,Balaji Raghavan,Pierre Villon Workshop: Reduced Basis, POD and PGD Model Reduction Techniques, Nov 2015, Cachan, France Communication dans un congrès hal-01333196v1
Simulation numérique 3D d’un BAP : étude de l’influence de la ségrégation et de la morphologie des granulats sur les comportements en traction et en compression Davood Niknezhad,Balaji Raghavan,Fabrice Bernard,Siham Kamali-Bernard Rencontres Universitaires de Génie Civil 2015, AUGC: Association Universitaires de Génie Civil, May 2015, Pau, France Communication dans un congrès hal-01113089v1
Identification of material properties with indentation test and shape manifold learning approach Liang Meng,Piotr Breitkopf,Balaji Raghavan,Olivier Bartier,Xavier Hernotet al. 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01515066v1
Réduction de modèle basée sur l’apprentissage par variété appliquée à l’optimisation du procédé d’emboutissage Guenhael Le Quilliec,Balaji Raghavan,Piotr Breitkopf CSMA 2015: 12me Colloque National en Calcul des Structures, CSMA, May 2015, Presqu'ile de Giens, France Communication dans un congrès hal-01113046v1
Simulation de la résistance résiduelle à la compression d’un béton exposé aux hautes températures Mourad Taj,Kinda Hannawi,Balaji Raghavan,William Prince-Agbodjan,Mohamed Zenasni 12me Congres de Mecanique, La Société Marocaine des Sciences Mécaniques, Le Réseau Universitaire de Mécanique, Apr 2015, Casablanca, Morocco Communication dans un congrès hal-01115155v1
Reduced order modeling for design optimization-with applications to metal forming and inverse problems Piotr Breitkopf,Liang Meng,Guenhael Le Quilliec,Balaji Raghavan,Pierre Villon 2015 European Altair Technology Conference, Sep 2015, Paris, France Communication dans un congrès hal-01333185v1
Simulation numérique de la résistance résiduelle à la compression du béton aux hautes températures Mourad Taj,Kinda Hannawi,Balaji Raghavan,William Prince 12ème Congrès de Mécanique, Apr 2015, Casablanca, Morocco Communication dans un congrès hal-01119303v1
A shape manifold learning approach for indentation-based identification of material properties Liang Meng,Piotr Breitkopf,Balaji Raghavan,Olivier Bartier,Xavier Hernotet al. 12e colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01400448v1
The influence of aggregate shape, volume fraction and segregation on the performance of Self-Compacting Concrete : 3D modeling and simulation Davood Niknezhad,Raghavan Balaji,Fabrice Bernard,Siham Kamali-Bernard 33èmes rencontres universitaires de Génie Civil, May 2015, bayonne, France Communication dans un congrès hal-01162016v1
A POD/PGD reduction approach for an efficient reparameterization of data-driven material microstructure models Liang Xia,Balaji Raghavan,Piotr Breitkopf,Weihong Zhang 20th Conference on Computer Methods in Materials Technology, ECCOMAS KomPlasTech 2013, Jan 2013, Zakopane, Poland. pp.219-225 Communication dans un congrès hal-00984659v1
Numerical material representation using proper orthogonal decomposition and diffuse approximation Liang Xia,Balaji Raghavan,Piotr Breitkopf,Weihong Zhang Third International Conference on Material Modelling incorporating the Thirteenth European Mechanics of Materials Conference, Sep 2013, Paris ( France), France. pp.NC Communication dans un congrès hal-00984762v1
Towards simultaneous meta-modeling for both the output and input spaces for interactive simulation-based structural design Piotr Breitkopf,Pierre Villon,Balaji Raghavan,Liang Xia RB-POD-PGD : 2nd International Workshop on Reduced Basis, POD and PGD model, Nov 2013, Blois, France. pp.NC Communication dans un congrès hal-00984612v1
Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds Balaji Raghavan,Piotr Breitkopf,Guenhael Le Quilliec 3rd African Conference on Computational Mechanics, AfriCOMP'13, Jul 2013, Livingstone, Zambia Communication dans un congrès hal-00984766v1
Toward parameterization of material microstructure based on a bi-level reduced model Liang Xia,Balaji Raghavan,Piotr Breitkopf 11e colloque national en calcul des structures, CSMA, May 2013, Giens, France Communication dans un congrès hal-01717843v1
Springback assessment based on level set interpolation and shape manifolds in deep drawing Guenhael Le Quilliec,Balaji Raghavan,Piotr Breitkopf,Alain Rassineux,Pierre Villonet al. NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Jan 2014, Melbourne, Australia. pp.748-751, ⟨10.1063/1.4850079⟩ Communication dans un congrès hal-00984418v1
Simultaneous meta-modeling for both input and output spaces for rapid design space exploration in structural shape optimization Balaji Raghavan,Piotr Breitkopf,Pierre Villon 11e colloque national en calcul des structures, CSMA, May 2013, Giens, France Communication dans un congrès hal-01717026v1
Towards simultaneous meta-modeling for both the output and input spaces in the context of design shape optimization using asynchronous high-performance computing Balaji Raghavan,Piotr Breitkopf,Pierre Villon 2nd ECCOMAS Young Investigators Conference (YIC 2013), Sep 2013, Bordeaux, France Communication dans un congrès hal-00855842v1
A REPARAMETERIZATION APPROACH FOR REDUCING DIMENSIONALITY IN SHAPE optimization Balaji Raghavan,Piotr Breitkopf,Pierre Villon WCCM X: 10th World Congress on Computational Mechanics, Jul 2012, Sao Paolo, Brazil. pp.NC Communication dans un congrès hal-00984768v1
A REPARAMETERIZATION APPROACH FOR REDUCING DIMENSIONALITY IN SHAPE optimization Balaji Raghavan,Piotr Breitkopf,Pierre Villon IASS-IACM 2012 : 7th International Conference on Computational Mechanics for Spatial Structures, Apr 2012, Sarajevo, Bosnia and Herzegovina. pp.NC Communication dans un congrès hal-00985093v1
Towards a reduced order modeling approach for efficient structural shape optimization Balaji Raghavan,Piotr Breitkopf,Pierre Villon 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Sep 2012, Vienna, Austria. pp.NC Communication dans un congrès hal-00984771v1
Pod-morphing : application to the optimization of an air-conditioning duct Balaji Raghavan,Manyu Xiao,Piotr Breitkopf,Pierre Villon EUROGEN 11: 9th International conference on evolutionary and deterministic methods for design, optimization and control with applications to industrial and societal problems, Capua, Italy, Sep 2011, Capua, Italy. pp.NC Communication dans un congrès hal-00985085v1
POD Morphing: une méthode de reparamétrage a posteriori des formes maillées pour l optimisation de forme des structures Balaji Raghavan,Piotr Breitkopf,Pierre Villon 10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB Communication dans un congrès hal-00592955v1
Surrogate models based on constrained POD for optimization Manyu Xiao,Balaji Raghavan,Piotr Breitkopf,Catherine Knopf-Lenoir ECCM 2010: 4th European Conference on Computational Mechanics, May 2010, Paris, France. pp.NC Communication dans un congrès hal-00985078v1
Programming paradigms for parallel finite element analysis and structural optimization Balaji Raghavan,Piotr Breitkopf,Catherine Knopf-Lenoir ECCM 2010: 4th European Conference on Computational Mechanics, May 2010, Paris, France. pp.NC Communication dans un congrès hal-00985075v1
Mechanics of Rotating Wound Rolls Balaji Raghavan,Eric Mockensturm ASME 2006 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Nov 2006, Chicago, Illinois, United States. pp.503-512, ⟨10.1115/IMECE2006-16238⟩ Communication dans un congrès hal-01113544v1
Parallel Optimality Criteria-based Topology Optimization for minimum Compliance Design Balaji Raghavan,Mary Frecker,Arash Mahdavi,Eric Mockensturm WCSMO6: 6th World Congress of Structural and Multidisciplinary Optimization, May 2005, Rie de Janeiro, Brazil. pp.NC Communication dans un congrès hal-00985114v1
Dynamic Analysis of a Serpentine Belt Drive With a Decoupler/Isolator Balaji Raghavan,Eric Mockensturm ASME 2004 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Nov 2004, Anaheim, California, United States. pp.291-303, ⟨10.1115/IMECE2004-61662⟩ Communication dans un congrès hal-01113735v1

Chapitre d'ouvrage (1)

On P-refinement in Topology Optimization Sougata Mukherjee,Balaji Raghavan,Subhrajit Dutta,Piotr Breitkopf Springer Nature. Modeling, Simulation and Optimization, pp.1-17, 2024, Smart innovation, systems and technologies, ⟨10.1007/978-981-99-6866-4_1⟩ Chapitre d'ouvrage hal-04574457v1