Carl LABERGERE

Présentation

Publications

Article dans une revue (45)

Reliability Analysis of the Ductile Fracture of Overpacks for High-Level Radioactive Waste in Repository Conditions A. Persoons,Jérémy Serveaux,P. Beaurepaire,Carl Labergere,A. Chateauneufet al. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 2021, 7 (2), pp.04021010. ⟨10.1061/AJRUA6.0001121⟩ Article dans une revue hal-03578925v1
A Finite Element Method to Predict the Mechanical Behavior of a Pre-Structured Material Manufactured by Fused Filament Fabrication in 3D Printing Marouene Zouaoui,Julien Gardan,Pascal Lafon,Ali Makke,Carl Labergereet al. Applied Sciences, 2021, 11 (11), pp.5075. ⟨10.3390/app11115075⟩ Article dans une revue hal-03578928v1
An advanced elastoplastic framework accounting for induced plastic anisotropy fully coupled with ductile damage Joseph Paux,Mohamed Ben Bettaieb,Houssem Badreddine,Farid Abed-Meraim,Carl Labergereet al. International Journal of Mechanical Sciences, 2021, 207, pp.106620. ⟨10.1016/j.ijmecsci.2021.106620⟩ Article dans une revue hal-03276459v1
Modeling and simulation of ductile damage in forged steel used to encapsulate high-level radioactive waste Jérémy Serveaux,Carl Labergere,Frédéric Bumbieler,Khemais Saanouni International Journal of Damage Mechanics, 2021, pp.105678952110617. ⟨10.1177/10567895211061797⟩ Article dans une revue hal-03578911v1
Thermomechanical model for solidification and cooling simulation of Ni-based superalloy components Carl Labergère,M. Long,Houssem Badreddine,N-T. Niane,D. Grangeet al. International Journal of Solids and Structures, 2021, 212, pp.202-219. ⟨10.1016/j.ijsolstr.2020.12.009⟩ Article dans une revue hal-03578906v1
An application of fully coupled ductile damage model considering induced anisotropies on springback prediction of advanced high strength steel materials Michel Yetna N'Jock,Houssem Badreddine,C. Labergere,Zhenming Yue,Khemais Saanouniet al. International Journal of Material Forming, 2021, 14 (4), pp.739-752. ⟨10.1007/s12289-020-01582-9⟩ Article dans une revue hal-03609052v2
Investigation on a full coupling between damage and other thermomechanical behaviours in the standard thermodynamic framework including environmental effects Kanssoune Saliya,Carl Labergere,Benoît Panicaud,Khemais Saanouni Acta Mechanica, 2020, 231 (5), pp.1731-1749. ⟨10.1007/s00707-020-02621-x⟩ Article dans une revue hal-02479515v1
An elasto-plastic self-consistent model for damaged polycrystalline materials: Theoretical formulation and numerical implementation J. Paux,Mohamed Ben Bettaieb,H. Badreddine,Farid Abed-Meraim,C. Labergereet al. Computer Methods in Applied Mechanics and Engineering, 2020, 368, pp.113138. ⟨10.1016/j.cma.2020.113138⟩ Article dans une revue hal-02923712v1
Transverse Isotropic Behavior Identification using Digital Image Correlation of a Pre-structured Material Manufactured by 3D Printing Marouene Zouaoui,Julien Gardan,Pascal Lafon,Carl Labergere,Ali Makkeet al. Procedia Structural Integrity, 2020, 28, pp.978-985. ⟨10.1016/j.prostr.2020.11.112⟩ Article dans une revue hal-03050230v1
Advanced modeling and numerical simulations for the thermo-chemico-mechanical behaviour of materials with damage and hydrogen, based on the thermodynamics of irreversible processes Kanssoune Saliya,Benoît Panicaud,Carl Labergere Finite Elements in Analysis and Design, 2019, 164, pp.79-97. ⟨10.1016/j.finel.2019.06.006⟩ Article dans une revue hal-02276036v1
Numerical Prediction of 3D Printed Specimens Based on a Strengthening Method of Fracture Toughness Marouene Zouaoui,Carl Labergere,Julien Gardan,Ali Makke,Naman Rechoet al. Procedia CIRP, 2019, 81, pp.40-44. ⟨10.1016/j.procir.2019.03.008⟩ Article dans une revue hal-02279790v1
Adaptive metamodel-assisted shape optimization for springback in metal forming processes Van-Tuan Dang,Carl Labergere,Pascal Lafon International Journal of Material Forming, 2019, 12 (4), pp.535-552. ⟨10.1007/s12289-018-1433-4⟩ Article dans une revue hal-02276004v1
An Experimental-numerical Study on the Plastic Flow Localization Based on a Generalized Micromorphic Formulation Evangelia Diamantopoulou,Carl Labergere,Khemais Saanouni,Bruno Guelorget,Manuel François Technische Mechanik, 2018, 38 (1), pp.3-21. ⟨10.24352/ub.ovgu-2018-003⟩ Article dans une revue hal-02276111v1
Effect of the kinematic hardening on the plastic anisotropy parameters for metallic sheets Houssem Badreddine,Khemais Saanouni,Carl Labergere,Jean-Louis Duval Comptes Rendus. Mécanique, 2018, 346 (8), pp.678-700. ⟨10.1016/j.crme.2018.06.004⟩ Article dans une revue hal-02276923v1
A 3D h-adaptive local remeshing technique for simulating the initiation and propagation of cracks in ductile materials F.T. Yang,A. Rassineux,Carl Labergere,Khemais Saanouni Computer Methods in Applied Mechanics and Engineering, 2018, 330, pp.102-122. ⟨10.1016/j.cma.2017.10.012⟩ Article dans une revue hal-02270956v1
Mechanical Behavior of Embossed AA1050-O Sheets Subjected to Tension and Forming Sabeur Msolli,Carl Labergere,Marion Martiny,Mohamad Jrad,Guillaume Robinet al. International Journal of Precision Engineering and Manufacturing, 2018, 19 (10), pp.1545-1551. ⟨10.1007/s12541-018-0182-0⟩ Article dans une revue hal-02279277v1
Modeling and numerical simulation of AA1050-O embossed sheet metal stamping Carl Labergere,Houssem Badreddine,Sabeur Msolli,Khemais Saanouni,Marion Martinyet al. Procedia Engineering, 2017, 207, pp.72-77. ⟨10.1016/j.proeng.2017.10.741⟩ Article dans une revue hal-02279377v1
Modeling of anisotropic and asymmetric behaviour of magnesium alloys at elevated temperature coupled with ductile damage K Zhang,Houssem Badreddine,C Labergere,Khemais Saanouni Journal of Physics: Conference Series, 2017, 896, pp.012022. ⟨10.1088/1742-6596/896/1/012022⟩ Article dans une revue hal-03621161v1
POD surrogate models using adaptive sampling space parameters for springback optimization in sheet metal forming Van Dang,Carl Labergere,Pascal Lafon Procedia Engineering, 2017, 207, pp.1588 - 1593. ⟨10.1016/j.proeng.2017.10.1053⟩ Article dans une revue hal-03609562v1
Micromorphic constitutive equations with damage applied to metal forming Evangelia Diamantopoulou,Weijie Liu,Carl Labergere,Houssem Badreddine,Khemais Saanouniet al. International Journal of Damage Mechanics, 2017, 26 (2), pp.314-339. ⟨10.1177/1056789516684650⟩ Article dans une revue hal-02279328v1
An Element Free Galerkin method for an elastoplastic coupled to damage analysis Zohra Sendi,Hédi Belhadjsalah,Carl Labergere,Khemais Saanouni MATEC Web of Conferences, 2016, 80, pp.07005. ⟨10.1051/matecconf/20168007005⟩ Article dans une revue hal-02276091v1
Ductile damage prediction in sheet and bulk metal forming Houssem Badreddine,Carl Labergere,Khemais Saanouni Comptes Rendus. Mécanique, 2016, 344 (4-5), pp.296-318. ⟨10.1016/j.crme.2015.11.006⟩ Article dans une revue hal-02276809v1
Prediction of Low Cycle Fatigue Life Using Cycles Jumping Integration Scheme Carl Labergere,Khemais Saanouni,Zhidan Sun,Mohamed Ali Dhifallah,Yisa Liet al. Applied Mechanics and Materials, 2015, 784, pp.308-316. ⟨10.4028/www.scientific.net/AMM.784.308⟩ Article dans une revue hal-02281523v1
Experimental characterization and numerical prediction of ductile damage in forming of AA1050-O sheets Sabeur Msolli,Houssem Badreddine,Carl Labergere,Marion Martiny,Guillaume Robinet al. International Journal of Mechanical Sciences, 2015, 99, pp.262-273. ⟨10.1016/j.ijmecsci.2015.05.020⟩ Article dans une revue istex hal-01514679v1
Multi-objective optimization based on meta-models of an aeronautical hub including the ductile damage constraint Fanjuan Meng,Carl Labergere,Pascal Lafon,Mathieu Duguy,Laurent Daniel International Journal of Damage Mechanics, 2014, 23 (8), pp.1055-1076. ⟨10.1177/1056789514544481⟩ Article dans une revue hal-02279439v1
Strain rate distribution and localization band width evolution during tensile test Carl Labergere,Bruno Guelorget,Manuel François International Journal of Solids and Structures, 2014, 51 (23-24), pp.3944-3961. ⟨10.1016/j.ijsolstr.2014.07.017⟩ Article dans une revue hal-02282859v1
Numerical simulation of continuous damage and fracture in metal-forming processes with 2D mesh adaptive methodology Alain Rassineux,Carl Labergere,Khemais Saanouni Finite Elements in Analysis and Design, 2014, 82, pp.46-61. ⟨10.1016/j.finel.2013.12.004⟩ Article dans une revue hal-02270989v1
Modeling of stress and strain fields induced during the Smart-Cut process on silicon. Influence of different couplings for diffusion of hydrogen at a microscopic scale Yuchen Zhao,Carl Labergere,Benoît Panicaud,Jean-Luc Grosseau-Poussard,P. Goudeau Advanced Materials Research, 2014, 996, pp.707--712. ⟨10.4028/www.scientific.net/AMR.996.707⟩ Article dans une revue hal-02182102v1
Modelling and numerical simulation of thick sheet double slitting process using continuum damage mechanics Yosr Ghozzi,Carl Labergere,Khemais Saanouni,Anthony Parrico International Journal of Damage Mechanics, 2014, 23 (8), pp.1150-1167. ⟨10.1177/1056789514520799⟩ Article dans une revue hal-02279415v1
Numerical simulation of sheet hydroforming taking into account analytical pressure and fluid flow Carl Labergere,Jean-Claude Gelin Journal of Materials Processing Technology, 2012, 212 (10), pp.2020-2030. ⟨10.1016/j.jmatprotec.2012.05.002⟩ Article dans une revue istex hal-02279888v1
Numerical prediction of thermomechanical field localization in orthogonal cutting Mazen Issa,Carl Labergere,Khemais Saanouni,A. Rassineux CIRP Journal of Manufacturing Science and Technology, 2012, 5 (3), pp.175-195. ⟨10.1016/j.cirpj.2012.07.003⟩ Article dans une revue istex hal-02270999v1
Optimization of Forging Preforms by Using Pseudo Inverse Approach Ali Halouani,Y.M. Li,Boussad Abbès,Y.Q. Guo,F.J. Menget al. Key Engineering Materials, 2012, 504-506 (24), pp.613-618. ⟨10.4028/www.scientific.net/KEM.504-506.613⟩ Article dans une revue hal-03611003v1
Benchmark of a forging process with a hammer: comparison between fem simulation results and real part shapes using 3D digitising scanner Carl Labergere,Sébastien Remy,Pascal Lafon,Arnaud Delespierre,Laurent Danielet al. Mécanique et Industries, 2011, 12 (3), pp.215-222. ⟨10.1051/meca/2011118⟩ Article dans une revue hal-02276214v1
2D adaptive mesh methodology for the simulation of metal forming processes with damage Carl Labergere,Alain Rassineux,Khemais Saanouni International Journal of Material Forming, 2011, 4 (3), pp.317-328. ⟨10.1007/s12289-010-1001-z⟩ Article dans une revue hal-02271006v1
Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodology Mazen Issa,Khemais Saanouni,Carl Labergere,Alain Rassineux International Journal of Machining and Machinability of Materials, 2011, 9 (3/4), pp.295. ⟨10.1504/IJMMM.2011.039653⟩ Article dans une revue hal-02271009v1
Methodology of the shape optimization of forging dies Fanjuan Meng,Carl Labergere,Pascal Lafon International Journal of Material Forming, 2010, 3 (S1), pp.927-930. ⟨10.1007/s12289-010-0920-z⟩ Article dans une revue hal-03610998v1
2D Adaptive FE Simulations in Finite Thermo-Elasto-Viscoplasticity with Ductile Damage: Application to Orthogonal Metal Cutting by Chip Formation and Breaking Khemais Saanouni,Philippe Lestriez,Carl Labergere International Journal of Damage Mechanics, 2009, 20 (1), pp.23-61. ⟨10.1177/1056789509343688⟩ Article dans une revue hal-02275853v1
Improving numerical simulation of metal forming processes using adaptive remeshing technique Carl Labergere,A. Rassineux,Khemais Saanouni International Journal of Material Forming, 2008, 1 (S1), pp.539-542. ⟨10.1007/s12289-008-0255-1⟩ Article dans une revue hal-02271013v1
F.E. elastoplastic damage model with 2D adaptive remeshing procedure for fracture prediction in metal forming simulation Houssem Badreddine,Carl Labergere,Khemais Saanouni,Wajdi Rajhi,A. Rassineuxet al. International Journal of Material Forming, 2008, 1 (S1), pp.109-112. ⟨10.1007/s12289-008-0032-1⟩ Article dans une revue hal-02271017v1
Modelling and control for the hydroforming of metallic liners used for hydrogen storage Jean-Claude Gelin,Carl Labergere,Sébastien Thibaud Journal of Materials Processing Technology, 2006, 177, pp. 697-700 Article dans une revue hal-00177424v1
Towards an optimisation of forging processes using geometric parameters Ibrahim Khoury,Laurence Giraud-Moreau,Pascal Lafon,Carl Labergére Journal of Materials Processing Technology, 2006, 177 (1-3), pp.224-227. ⟨10.1016/j.jmatprotec.2006.04.081⟩ Article dans une revue istex hal-03620900v1
Recent advance in progress design or sheet and tube hydroforming Jean-Claude Gelin,Carl Labergere Romanian Academy of Science, 2005, 1, pp. 445-449 Article dans une revue hal-00020568v1
Optimization and control of flange and tube hydroforming processes Carl Labergere,Arnaud Lejeune,Jean-Claude Gelin Journal of Steels and Related Materials, 2004, 2, pp. 221-227 Article dans une revue hal-00020435v1
Application of optimal design and control strategies to the hydroforming of thin walled metallic tubes Jean-Claude Gelin,Carl Labergere International Journal of Forming Processes, 2004, 7(1-2), pp. 141-158 Article dans une revue hal-00020434v1
Application of optimal design and control strategies to the forming of thin walled metallic components Jean-Claude Gélin,Carl Labergere Journal of Materials Processing Technology, 2002, 125-126, pp. 565-572. ⟨10.1016/S0924-0136(02)00400-4⟩ Article dans une revue istex hal-00079401v1