Charbel Moussa Charbel MoussaProfessor Physical and Mechanical Metallurgy

Identifiants chercheurs

IdHAL :

charbel-moussa

ORCID :

0000-0002-4564-6732

ResearcherID :

http://www.researcherid.com/rid/J-8949-2015

Présentation

Publications

Article dans une revue (31)

A Short Introduction to Metal Forming Charbel Moussa,Pierre Montmitonnet Arxiv, 2025, ⟨10.48550/arXiv.2511.17222⟩ Article dans une revue (article de synthèse) hal-05406171v1
Effect of second-phase precipitates on deformation microstructure in AA2024 (Al–Cu–Mg): dislocation substructures and stored energy Daniel Irmer,Can Yildirim,Mohamed Sennour,Vladimir A. Esin,Charbel Moussa Journal of Materials Science, 2024, 59 (40), pp.18978-19002. ⟨10.1007/s10853-024-10205-6⟩ Article dans une revue hal-04830761v1
Microstructural Evolution in Inconel 718 During Room-Temperature Tube Flow Forming: Plastic Flow Heterogeneities and δ Phase Evolution Charbel Moussa,Emile Hazemann,Camille Srecki,Alexandre Thealler,Katia Mocellinet al. Metallurgical and Materials Transactions A, 2024, 55 (5), pp.1311-1318. ⟨10.1007/s11661-024-07361-4⟩ Article dans une revue hal-04610061v1
From heterogeneous nucleation to homogeneous spatial distribution of hardening precipitates: An in situ TEM study on cold-rolled AA2024-T3 (Al–Cu–Mg) Daniel Irmer,Mohamed Sennour,F. Sun,Philippe Vermaut,Charbel Moussaet al. MRS Communications, 2024, 14, pp.633-638. ⟨10.1557/s43579-024-00572-1⟩ Article dans une revue hal-04622156v1
Effect of cold rolling on nucleation, growth and coarsening of S-phase precipitates in Al- Cu- Mg alloy (AA2024): From heterogeneous nucleation to homogeneous spatial distribution Daniel Irmer,Charbel Moussa,Lisa Belkacemi,Mohamed Sennour,Alan Vaissièreet al. Journal of Alloys and Compounds, 2023, 963, pp.171162. ⟨10.1016/j.jallcom.2023.171162⟩ Article dans une revue hal-04161006v1
Influence of crystallographic orientation on the recrystallization of pure tantalum through microstructure-based estimation of the stored energy J. Baton,W. Geslin,Charbel Moussa International Journal of Refractory Metals and Hard Materials, 2022, 104, pp.105786. ⟨10.1016/j.ijrmhm.2022.105786⟩ Article dans une revue hal-03577466v1
Dislocation sub-structures, recovery and recrystallization in pure tantalum Charbel Moussa,Jules Baton,W Geslin IOP Conference Series: Materials Science and Engineering, 2022, 1249 (1), pp.012062. ⟨10.1088/1757-899X/1249/1/012062⟩ Article dans une revue hal-03905860v1
Influence of pre-recovery on the recrystallization of pure tantalum Jules Baton,W. Geslin,Charbel Moussa Journal of Materials Science, 2021, 56 (27), pp.15354-15378. ⟨10.1007/s10853-021-06218-0⟩ Article dans une revue hal-03463380v1
Continuous dynamic recrystallization in a Zn–Cu–Ti sheet subjected to bilinear tensile strain M. Leonard,Charbel Moussa,A. Roatta,A. Seret,J.W. Signorelli Materials Science and Engineering: A, 2020, 789, pp.139689. ⟨10.1016/j.msea.2020.139689⟩ Article dans une revue hal-02871128v1
Full field modeling of dynamic recrystallization in a CPFEM context – Application to 304L steel David Alejandro Ruiz Sarrazola,Ludovic Maire,Charbel Moussa,N. Bozzolo,Daniel Pino Muñozet al. Computational Materials Science, 2020, 184, pp.109892. ⟨10.1016/j.commatsci.2020.109892⟩ Article dans une revue hal-03096622v1
Orientation and deformation conditions dependence of dislocation substructures in cold deformed pure tantalum J. Baton,W. Geslin,Charbel Moussa Materials Characterization, 2020, pp.110789. ⟨10.1016/j.matchar.2020.110789⟩ Article dans une revue hal-03096625v1
Extrema of micro-hardness in fully pearlitic compacted graphite cast iron Jacques Lacaze,Charbel Moussa,Yannick Thebault,Wilson L Guesser International Journal of Cast Metals Research, The, 2020, 33 (4-5), pp.218-225. ⟨10.1080/13640461.2020.1832308⟩ Article dans une revue hal-02966196v1
A mean field model of agglomeration as an extension to existing precipitation models Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo Acta Materialia, 2020, 192, pp.40-51. ⟨10.1016/j.actamat.2020.04.029⟩ Article dans une revue hal-03030600v1
Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines Anthony Seret,Charbel Moussa,Marc Bernacki,Javier Signorelli,Nathalie Bozzolo Journal of Applied Crystallography, 2019, 52 (3), ⟨10.1107/S1600576719004035⟩ Article dans une revue hal-02126125v1
A new topological approach for the mean field modeling of dynamic recrystallization Ludovic Maire,Julien Fausty,Marc Bernacki,Nathalie Bozzolo,Pascal de Micheliet al. Materials & Design, 2018, 146, pp.194-207. ⟨10.1016/j.matdes.2018.03.011⟩ Article dans une revue hal-01731431v1
On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ′ Nickel-Based Superalloy Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo Metallurgical and Materials Transactions A, 2018, 49 (9), pp.4199-4213. ⟨10.1007/s11661-018-4707-z⟩ Article dans une revue hal-01817936v1
Prediction of the grain size evolution during thermal treatments at the mesoscopic scale: a numerical framework and industrial examples Amico Settefrati,Pascal de Micheli,Ludovic Maire,Benjamin Scholtes,Nathalie Bozzoloet al. Matériaux et Techniques, 2018, Control, modeling and characterization of heat treatment and surface engineering, 106 (105), ⟨10.1051/mattech/2018034⟩ Article dans une revue hal-01853983v1
Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws Ludovic Maire,Benjamin Scholtes,Charbel Moussa,Nathalie Bozzolo,Daniel Pino Muñozet al. Materials & Design, 2017, 133, pp.498-519. ⟨10.1016/j.matdes.2017.08.015⟩ Article dans une revue hal-01573836v1
Statistical analysis of dislocations and dislocation boundaries from EBSD data Charbel Moussa,Marc Bernacki,Rémy Besnard,Nathalie Bozzolo Ultramicroscopy, 2017, 179, pp.63-72. ⟨10.1016/j.ultramic.2017.04.005⟩ Article dans une revue hal-01509485v1
Improvement of 3D mean field models for capillarity-driven grain growth based on full field simulations Ludovic Maire,Benjamin Scholtes,Charbel Moussa,Nathalie Bozzolo,Daniel Pino Muñozet al. Journal of Materials Science, 2016, 51 (24), pp.10970-10981. ⟨10.1007/s10853-016-0309-6⟩ Article dans une revue hal-01369919v1
Mechanical characterization of carbonitrided steel with spherical indentation using the average representative strain Charbel Moussa,Olivier Bartier,Xavier Hernot,Gérard Mauvoisin,Jean-Marc Collinet al. Materials & Design, 2016, 89, pp.1191-1198. ⟨10.1016/j.matdes.2015.10.067⟩ Article dans une revue hal-01247082v1
Full field modeling of recrystallization and grain growth thanks to a level set approach: towards modeling by industry Marc Bernacki,Benjamin Scholtes,Amico Settefrati,Nathalie Bozzolo,Charbel Moussaet al. MATCH Newsletter, 2016, 2 Article dans une revue hal-01327920v1
About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum Charbel Moussa,M Bernacki,R Besnard,N Bozzolo IOP Conference Series: Materials Science and Engineering, 2015, 89, pp.012038. ⟨10.1088/1757-899X/89/1/012038⟩ Article dans une revue hal-03905857v1
Experimental and numerical investigation on carbonitrided steel characterization with spherical indentation Charbel Moussa,Olivier Bartier,Gerard Mauvoisin,Xavier Hernot,Jean-Marc Collinet al. Surface and Coatings Technology, 2014, 258, pp.782-789. ⟨10.1016/j.surfcoat.2014.07.080⟩ Article dans une revue hal-01072549v1
Identification of the hardening law of materials with spherical indentation using the average representative strain for several penetration depths Charbel Moussa,Xavier Hernot,Olivier Bartier,Guillaume Delattre,Gerard Mauvoisin Materials Science and Engineering: A, 2014, 606, pp.409-416. ⟨10.1016/j.msea.2014.03.123⟩ Article dans une revue hal-01003216v1
Study of the concept of representative strain and constraint factor introduced by Vickers indentation Xavier Hernot,Charbel Moussa,Olivier Bartier Mechanics of Materials, 2014, 68, pp.1-14. ⟨10.1016/j.mechmat.2013.07.004⟩ Article dans une revue hal-00864927v1
Revue bibliographique sur la caractérisation mécanique des matériaux utilisant la déformation représentative en indentation sphérique Literature review on mechanical characterization of materials using a representative strain in spherical indentation Charbel Moussa,Olivier Bartier,Gerard Mauvoisin,Guillaume Delattre,Xavier Hernot Matériaux et Techniques, 2013, 101 (302), pp.1-14 Article dans une revue hal-00996606v1
Comparaison entre les déformations représentatives de l'indentation Vickers et de l'indentation sphérique Comparison between representative deformations in Vickers indentation and spherical indentation Olivier Bartier,Xavier Hernot,Gerard Mauvoisin,Charbel Moussa Matériaux et Techniques, 2013, 101 (303), pp.1-11 Article dans une revue hal-00996578v1
Evaluation of the tensile properties of a material through spherical indentation: definition of an average representative strain and a confidence domain. Charbel Moussa,Xavier Hernot,Olivier Bartier,Guillaume Delattre,Gérard Mauvoisin Journal of Materials Science, 2013, 23 p. ⟨10.1007/s10853-013-7739-1⟩ Article dans une revue hal-00914432v1
Characterization of homogenous and plastically graded materials with spherical indentation and inverse analysis Charbel Moussa,Olivier Bartier,Gerard Mauvoisin,Philippe Pilvin,Guillaume Delattre Journal of Materials Research, 2012, 27 (1), pp.20-27. ⟨10.1557/jmr.2011.303⟩ Article dans une revue hal-00829993v1
CHARACTERIZATION OF HOMOGENOUS AND PLASTICALLY GRADED MATERIALS WITH SPHERICAL INDENTATION AND INVERSE ANALYSIS Charbel Moussa,Olivier Bartier,Gerard Mauvoisin,Philippe Pilvin,Guillaume Delattre Journal of Materials Research, 2012, 27 (1), pp.20-27. ⟨10.1557/jmr.2011.303⟩ Article dans une revue hal-00996465v1

Communication dans un congrès (54)

Interaction entre les précipités et les structures de dislocations dans un alliage d'aluminium 2024 (Al-Cu-Mg) Charbel Moussa,Daniel Irmer,Vladimir A. Esin,Mohamed Sennour 6ème journée Matériaux UniCa, Apr 2025, Sophia Antipolis, France Communication dans un congrès hal-05406181v1
Caractérisation du comportement en rupture de la pile d'éponge de Zr en fonction de sa microstructure P. Guerrin,Pauline Hahn,C. Levard,A. Barron,Guillaume Corvecet al. La métallurgie, quel avenir !, Jun 2025, Toulouse, France Communication dans un congrès hal-05406564v1
Évolution de la microstructure lors du fluotournage d'Inconel 718 et d'alliage d'aluminium 2219 Charbel Moussa,Emile Hazemann,Camille Srecki,Alexandre Thealler,Pierre-Olivier Bouchardet al. La métallurgie, quel avenir !, Jun 2025, Toulouse, France Communication dans un congrès hal-05406188v1
Évolution de microstructure lors de fabrication d'emballages métalliques : optimisation du procédé pour application sur des alliages d'aluminium recyclé Charbel Moussa,Eleonora Abi Rached Journées annuelles de la SF2M 2024, Nov 2024, Paris, France Communication dans un congrès hal-05406177v1
Investigating the Influence of Cold Rolling on Precipitation in Industrial AA2024 using Advanced Microscopy Techniques Daniel Irmer,Mohamed Sennour,Lisa T. Belkacemi,Vladimir A. Esin,Charbel Moussa XVIIIème colloque de la Société Française des Microscopies, Jul 2023, Rouen, France Communication dans un congrès hal-04354409v1
Effet de la pré-déformation sur la germination, la croissance et le murissement de la phase s dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène Daniel Irmer,Charbel Moussa,Lisa Thinhinane Belkacemi,Mohamed Senour,Alan Vassièreet al. La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France Communication dans un congrès hal-04281756v1
Influence of crystal orientation on recovery and recrystallization in pure tantalum Charbel Moussa,Jules Baton,Wilfried Geslin ReX & GG 2023 - 8th Conference on Recrystallization and Grain Growth, May 2023, Copenhagen, Denmark Communication dans un congrès hal-04354372v1
Interaction between S-phase precipitates and dislocation sub-structures in AA2024 (Al-Cu-Mg family) Charbel Moussa,Daniel Irmer,Vladimir A. Esin,Mohamed Sennour 14th International Conference on the Technology of Plasticity, Sep 2023, mandelieu la napoule, France Communication dans un congrès hal-04281741v1
Effet de la pré-déformation sur la germination, la croissance et le mûrissement de la phase S dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène Daniel Irmer,Charbel Moussa,L. Belkacemi,Mohamed Sennour,A. Vaissièreet al. La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France Communication dans un congrès hal-04354382v1
Effet de la pré-déformation par laminage à froid sur la précipitation de la phase S-Al2CuMg dans un alliage d'aluminium 2024-T3 Daniel Irmer,Charbel Moussa,Mohamed Sennour,Vladimir A. Esin Matériaux 2022, Oct 2022, Lille, France Communication dans un congrès hal-04281768v1
Supersolvus microstructure evolution of VDM ® Alloy 780 during dynamic and post-dynamic recrystallization processes M Hafez Haghighat,Juhi Sharma,Charbel Moussa,B Gehrmann,H Alveset al. 4th European Symposium on Superalloys and their Applications (EuroSuperalloys 2022), Sep 2022, Bamberg, Germany Communication dans un congrès hal-03875766v1
Cold rolling and growth-coarsening of S-phase in AA2024: effect on microstructure and hardness Daniel Irmer,Vladimir A. Esin,Charbel Moussa,Mohamed Sennour ICAA 2022 - 18th International Conference on Aluminum Alloys, Sep 2022, Toyama, Japan Communication dans un congrès hal-04281763v1
Dislocation sub-structures, recovery and recrystallization in pure tantalum Charbel Moussa,Jules Baton,Wilfried Geslin The 42ndRiso international Symposium: Microstructural variability: Processing, analysis, mechanisms and properties, Sep 2022, Riso, Denmark Communication dans un congrès hal-03905877v1
Digimu: 2D and 3D full field recrystallization simulations with coupled micro-macro approaches Pascal de Micheli,Ludovic Maire,Charbel Moussa,Nathalie Bozzolo,Marc Bernacki NEMU 2019, May 2019, Stuttgart, Germany Communication dans un congrès hal-02114059v1
DIGIMU®: Full field recrystallization simulations for optimization of multi-pass processes Pascal de Micheli,Ludovic Maire,D. Cardinaux,Charbel Moussa,Nathalie Bozzoloet al. PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, May 2019, Vitoria-Gasteiz, France. pp.040014, ⟨10.1063/1.5112548⟩ Communication dans un congrès hal-02417694v1
A new full field framework to model grain and phase boundaries migration during diffusive solid/solid phase transformations and recrystallization. Marc Bernacki,Chau Thuy Pham,Nathalie Bozzolo,Charbel Moussa 7th International Conference on Recrystallization and Grain Growth - ReX & GG 2019, Aug 2019, Ghent, Belgium Communication dans un congrès hal-02114403v1
Dislocation substructures in cold deformed pure tantalum Jules Baton,Charbel Moussa,Wilfried Geslin,Nathalie Bozzolo REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium Communication dans un congrès hal-02418778v1
Experimental and simulation study of the effect of precipitation distribution and grain size on-the AD730 Ni-based polycrystalline superalloy tensile behavior Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo Journées annuelles de la SF2M, Oct 2019, Paris, France Communication dans un congrès hal-02418061v1
Precipitation concomitant to post-dynamic Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo Journées annuelles de la SF2M, Oct 2019, Paris, France Communication dans un congrès hal-02417991v1
Precipitation concomitant to post-dynamic recrystallization in the AD730™ nickel base superalloy Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo Journées annuelles de la SF2M, Oct 2019, Paris, France Communication dans un congrès hal-02902587v1
Dynamic and post dynamic microstructure evolutions during forging of the new nickel based superalloy VDM Alloy 780 Juhi Sharma,Charbel Moussa,Hafez Masood,Bodo Gehrmann,Nathalie Bozzolo AeroMat 2019, May 2019, Reno, United States Communication dans un congrès hal-02418870v1
Digimu®: Full field recrystallization simulations for optimization of multi-pass processes Pascal de Micheli,Ludovic Maire,David Cardinaux,Charbel Moussa,Nathalie Bozzoloet al. ESAFORM 2019 Conference, May 2019, Vitoria-Gasteiz, Spain. pp.040014, ⟨10.1063/1.5112548⟩ Communication dans un congrès hal-02114067v1
Dynamic recrystallization in 304L steel: Full field and mean field simulation results compared to experimental data Ludovic Maire,Julien Fausty,Marc Bernacki,Nathalie Bozzolo,Isabelle Poitraultet al. REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium Communication dans un congrès hal-02418807v1
Smoothing of EBSD datasets to quantify the geometrically necessary dislocation density: application to the discrimination of dynamically vs. post-dynamically recrystallized grains in forged nickel-based superalloys. Anthony Seret,Alexis Nicolaÿ,Jean-Michel Franchet,Charbel Moussa,Marc Bernackiet al. La Métallurgie : Quel avenir!, Apr 2019, Nancy, France Communication dans un congrès hal-02418251v1
Dynamic and Post dynamic microstructure evolutions during forging of the new nickel-based superalloy – VDM Alloy 780 Juhi Sharma,Charbel Moussa,Hafez Masood,Bodo Gehrmann,Nathalie Bozzolo REX&GG 2019 - 7th international conference on recrystallization and grain growth, Aug 2019, Ghent, Belgium Communication dans un congrès hal-02418757v1
Towards the full field modeling of microstructure evolutions during metal forming industrial processes Marc Bernacki,Nathalie Bozzolo,Charbel Moussa,Daniel Pino Muñoz,Pascal de Micheliet al. 7th International Conference on Recrystallization and Grain Growth - ReX & GG 2019, Aug 2019, Ghent, Belgium Communication dans un congrès hal-02114513v1
A 3D numerical framework for the full field modeling of recrystallization Marc Bernacki,Ludovic Maire,Julien Fausty,Nathalie Bozzolo,Daniel Pino Muñozet al. THERMEC’2018, Jul 2018, Paris, France Communication dans un congrès hal-01858268v1
A new topological model for the prediction of dynamic recrystallization Ludovic Maire,Julien Fausty,Marc Bernacki,Nathalie Bozzolo,Pierre de Micheliet al. ECCM - ECFD 2018, Jun 2018, Glasgow, United Kingdom Communication dans un congrès hal-01814101v1
Mean field and full field simulations of dynamic recrystallization of austenitic 304L steel Ludovic Maire,Julien Fausty,Nathalie Bozzolo,Marc Bernacki,Daniel Pino Muñozet al. Matériaux 2018, Nov 2018, Strasbourg, France Communication dans un congrès hal-01973194v1
Simulation of the Austenite (γ) – Ferrite (α) transformation in steels within a finite element – level set numerical framework Chau Thuy Pham,Nathalie Bozzolo,Charbel Moussa,David Cardinaux,Aurore Montouchetet al. Matériaux 2018, Nov 2018, Strasbourg, France Communication dans un congrès hal-01973232v1
Towards the full modeling of microstructure evolutions during metal forming industrial processes Marc Bernacki,Ludovic Maire,Julien Fausty,Nathalie Bozzolo,Charbel Moussaet al. Matériaux 2018, Nov 2018, Strasbourg, France Communication dans un congrès hal-01973291v1
Full field simulation of dynamic and post-dynamic recrystallization in 304L steel Ludovic Maire,Charbel Moussa,Nathalie Bozzolo,Daniel Pino Muñoz,Marc Bernacki Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France Communication dans un congrès hal-01624697v1
Recent advances concerning the numerical modeling of metallic materials at the mesoscopic scale Marc Bernacki,Nathalie Bozzolo,Charbel Moussa,Daniel Pino Muñoz CEA DAM Ile de France, Mar 2017, Bruyères le Chatel, France Communication dans un congrès hal-01692080v1
3D Full field modelling of recrystallization in a finite element framework – application to 304L Ludovic Maire,Benjamin Scholtes,Charbel Moussa,Nathalie Bozzolo,Amico Settefratiet al. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01899284v1
Influence of the dislocation density on hardening precipitation in Inconel© 625 Anthony Seret,Charbel Moussa,Marc Bernacki,Jonathan Cormier,Nathalie Bozzolo Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France Communication dans un congrès hal-01624670v1
Modeling of dynamic recrystallization in austenitic stainless steel 304l by coupling a full field approach in a finite element framework with mean field laws. Ludovic Maire,Charbel Moussa,Nathalie Bozzolo,Marc Bernacki 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France Communication dans un congrès hal-01504490v1
Recent advances in the full field modeling of recrystallization and grain growth using the level set approach Daniel Pino Muñoz,Marc Bernacki,Nathalie Bozzolo,Thomas Toulorge,Charbel Moussaet al. 14th U.S. National Congress on Computational Mechanics - USNCCM14, Jul 2017, Montreal, Canada Communication dans un congrès hal-01573960v1
Modelling of grain growth in polycrystalline microstructures with heterogeneous grain size A. Karch,Ludovic Maire,Charbel Moussa,Nathalie Bozzolo,Marc Bernacki EUROMAT 2017, Sep 2017, Thessaloniki, Greece Communication dans un congrès hal-01858273v1
About the predictability of microstructure evolution upon thermomechanical processing of nickel-based superalloys Nathalie Bozzolo,Charbel Moussa,Marc Bernacki TMS 2017 - 146th Annual Meeting and Exhibition - Materials for High Temperature Applications: Next Generation Superalloys and Beyond, The Minerals, Metals & Materials Society (TMS), Feb 2017, San Diego, United States Communication dans un congrès hal-01507106v1
Recent advances concerning the numerical modeling of metallic materials at the mesoscopic scale Marc Bernacki,Daniel Pino Muñoz,Charbel Moussa,Nathalie Bozzolo Centre de recherches de Constellium, Jul 2017, Voreppe France Communication dans un congrès hal-01692074v1
Modeling of dynamic recrystallization in austenitic stainless steel 304L by coupling a full field approach in a finite element framework with mean field laws Ludovic Maire,Charbel Moussa,Nathalie Bozzolo,Marc Bernacki 2017 MRS Spring Meeting & Exhibit, Materials Research Society, Apr 2017, Phoenix, United States Communication dans un congrès hal-01507114v1
Quantification of the density of dislocations in Nickel-based superalloys Anthony Seret,Charbel Moussa,Marc Bernacki,Nathalie Bozzolo olloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France Communication dans un congrès hal-01480053v1
Full field modeling of dynamic recrystallization in a level-set framework Romain Boulais-Sinou,Benjamin Scholtes,Daniel Pino Muñoz,Charbel Moussa,Nathalie Bozzoloet al. Colloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France Communication dans un congrès hal-01480100v1
Full field modeling of dynamic recrystallization in a global level set framework, application to 304L stainless steel Romain Boulais-Sinou,Benjamin Scholtes,Daniel Pino Muñoz,Charbel Moussa,Isabelle Poitraultet al. NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France. pp.02005, ⟨10.1051/matecconf/20168002005⟩ Communication dans un congrès hal-01421567v1
Simulation of Static Recrystallization and Grain Growth Phenomena by Mean Field and Full Field Modeling Ludovic Maire,Benjamin Scholtes,Charbel Moussa,Daniel Pino Muñoz,Nathalie Bozzoloet al. Colloque "Métallurgie, quel avenir!", Jun 2016, Saint-Etienne, France Communication dans un congrès hal-01480077v1
Strategies for a quantitative description of deformation substructures in view of recrystallization nucleation modelling Charbel Moussa,Victor-Manuel Trejo-Navas,Marc Bernacki,Rémy Besnard,Nathalie Bozzolo 6th International Conference on Recrystallization and Grain Growth: Recrystallization II: Dynamic Recrystallization, Jul 2016, Pittsburgh, United States Communication dans un congrès hal-01479906v1
Recrystallization and grain growth modeling at the mesoscopic scale thanks to a level-set/FE framework Benjamin Scholtes,Romain Boulais-Sinou,Amico Settefrati,Nathalie Bozzolo,Daniel Pino Muñozet al. 6th International Conference on Recrystallization and Grain Growth: Recrystallization II: Dynamic Recrystallization, Jul 2016, Pittsburgh, Pennsylvania, United States Communication dans un congrès hal-01479206v1
About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum Charbel Moussa,Marc Bernacki,Rémy Besnard,Nathalie Bozzolo 36th Riso International Symposium on Materials Science, Sep 2015, Riso, Denmark. pp.012038, ⟨10.1088/1757-899X/89/1/012038⟩ Communication dans un congrès hal-01203276v1
Determination of the plastic strain by spherical indentation of uniaxially deformed sheet metals Mohamad Idriss,Olivier Bartier,Gerard Mauvoisin,Charbel Moussa,Eddie Gazo-Hannaet al. ESAFORM 2015, Apr 2015, graz, Austria. pp.950-956, ⟨10.4028/www.scientific.net/KEM.651-653.950⟩ Communication dans un congrès hal-01157597v1
CARACTERISATION D'ACIERS CARBONITRURES AVEC L'INDENTATION SPHERIQUE Charbel Moussa,Gerard Mauvoisin,Olivier Bartier,Xavier Hernot,G Delattre indentation 2014, Dec 2014, strasbourg, France Communication dans un congrès hal-01157560v1
CARACTERISATION DES MATERIAUX METALLIQUES PAR INDENTATION SPHERIQUE : UTILISATION D'UNE DEFORMATION REPRESENTATIVE POUR PLUSIEURS PROFONDEURS D'INDENTATION Charbel Moussa,Gérard Mauvoisin,Xavier Hernot,Olivier Bartier,Guillaume Delattr indentation 2014, Dec 2014, strasbourg, France Communication dans un congrès hal-01157566v1
LOCAL EVALUATION OF THE HARDENING LAW OF A MATERIAL THROUGH SPHERICAL INDENTATION: DEFINITION OF AN AVERAGE REPRESENTATIVE STRAIN AND A CONFIDENCE DOMAIN Charbel Moussa,Xavier Hernot,Olivier Bartier,Gerard Mauvoisin,Guillaume Delattre 10th International Conference of Local Mechanical Properties, Nov 2013, Kutna Hora, Czech Republic Communication dans un congrès hal-00994658v1
Mechanical Characterization of Carbonitrided Steels with Spherical Indentation Olivier Bartier,Charbel Moussa,Gerard Mauvoisin,Xavier Hernot,Guillaume Delattre 10th International Conference of Local Mechanical Properties, Nov 2013, Kutna Hora, Czech Republic Communication dans un congrès hal-00994656v1
Spherical indentation of homogenous and plastically graded materials. Charbel Moussa,Olivier Bartier,Gerard Mauvoisin,Philippe Pilvin,Jean-Marc Collinet al. International indentation workshop 4, Jul 2011, séoul, South Korea Communication dans un congrès hal-01003498v1

Chapitre d'ouvrage (1)

Dynamic and Post-dynamic Recrystallization During Supersolvus Forging of the New Nickel-Based Superalloy—VDM Alloy 780 Juhi Sharma,Charbel Moussa,Nathalie Bozzolo,Masood Hafez Haghighat,Bodo Gehrmann Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys, pp.450-460, 2020, ⟨10.1007/978-3-030-51834-9_44⟩ Chapitre d'ouvrage hal-03064549v1

Proceedings/Recueil des communications (1)

Dislocation sub-structures, recovery and recrystallization in pure tantalum Charbel Moussa,Jules Baton,W. Geslin IOP Conference Series: Materials Science and Engineering, 1249 (1), pp.012062, 2022, ⟨10.1088/1757-899X/1249/1/012062⟩ Proceedings/Recueil des communications hal-03874949v1