Denis Favier

Présentation

Publications

Article dans une revue (62)

Anisotropy and Clausius-Clapeyron relation for forward and reverse stress-induced martensitic transformations in polycrystalline NiTi thin walled tubes Estephanie Nobre Dantas Grassi,Grégory Chagnon,Henrique Martinni Ramos de Oliveira,Denis Favier Mechanics of Materials, 2020, 146, ⟨10.1016/j.mechmat.2020.103392⟩ Article dans une revue hal-02537803v2
Specific forward/reverse latent heat and martensite fraction measurement during superelastic deformation of nanostructured NiTi wires Henrique Martinni Ramos de Oliveira,Hervé Louche,Estephanie Nobre Dantas Grassi,Denis Favier Materials Science and Engineering: A, 2020, 774, pp.138928. ⟨10.1016/j.msea.2020.138928⟩ Article dans une revue hal-02470296v1
Evaluation of a biodegradable PLA–PEG–PLA internal biliary stent for liver transplantation: in vitro degradation and mechanical properties Edouard Girard,Grégory Chagnon,Alexandre Moreau-Gaudry,Christian Letoublon,Denis Favieret al. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2020, ⟨10.1002/jbm.b.34709⟩ Article dans une revue hal-02961051v1
Characterizing Transformation Phenomena and Elastic Moduli of Austenite and Oriented Martensite of Superelastic Thin NiTi Wire through Isothermal Dynamic Mechanical Analysis Thierry Alonso,Denis Favier,Grégory Chagnon Journal of Materials Engineering and Performance, 2019, ⟨10.1007/s11665-019-04225-6⟩ Article dans une revue hal-02195024v1
Experimental characterization and constitutive modeling of the biomechanical behavior of male human urethral tissues validated by histological observations Christopher Masri,Grégory Chagnon,Denis Favier,Hervé Sartelet,Edouard Girard Biomechanics and Modeling in Mechanobiology, 2018, ⟨10.1007/s10237-018-1003-1⟩ Article dans une revue hal-01807582v1
A method to determine the shear and compressive stress-strain curves from torsion and bending tests of thin wires Nathanaël Connesson,Gabriel Antherieu,Denis Favier Strain, 2017, 53 (3), pp.e12227. ⟨10.1111/str.12227⟩ Article dans une revue hal-02005743v1
Influence of processing parameters on the macroscopic mechanical behavior of PVA hydrogels Christopher Masri,Grégory Chagnon,Denis Favier Materials Science and Engineering: C, 2017, 75, pp.769-776. ⟨10.1016/j.msec.2017.02.045⟩ Article dans une revue hal-01481365v1
Light-Induced Bulk Architecturation of PDMS Membranes Arthur Stricher,R.G. Rinaldi,Guilherme Machado,Grégory Chagnon,Denis Favieret al. Macromolecular Materials and Engineering, 2016, 301, pp.1151-1157. ⟨10.1002/mame.201600237⟩ Article dans une revue hal-01399334v1
Mechanical behavior of architectured photosensitive silicone membranes: Experimental data and numerical analysis Guilherme Machado,Arthur Stricher,Grégory Chagnon,Denis Favier Mechanics of Advanced Materials and Structures, 2016, 24 (6), pp.524-533. ⟨10.1080/15376494.2016.1161096⟩ Article dans une revue hal-01480538v1
Mechanical behaviour'sevolution of a PLA-b-PEG-b-PLA triblock copolymer during hydrolytic degradation Quentin Breche,Grégory Chagnon,Guilherme Machado,Edouard Girard,Benjamin Notteletet al. Journal of the mechanical behavior of biomedical materials, 2016, 60, pp.288-300. ⟨10.1016/j.jmbbm.2016.02.015⟩ Article dans une revue hal-01369301v1
A non-linear viscoelastic model to describe the mechanical behavior's evolution of biodegradable polymers during hydrolytic degradation Quentin Breche,Grégory Chagnon,Guilherme Machado,Benjamin Nottelet,Xavier Garricet al. Polymer Degradation and Stability, 2016, 131, pp.145-156. ⟨10.1016/j.polymdegradstab.2016.07.014⟩ Article dans une revue hal-01369282v1
Determination of Local Thermophysical Properties and Heat of Transition from Thermal Fields Measurement During Drop Calorimetric Experiment Vincent Delobelle,Denis Favier,Hervé Louche,Nathanael Connesson Experimental Mechanics, 2015, 55 (4), pp.711-723. ⟨10.1007/s11340-014-9877-z⟩ Article dans une revue hal-01300519v1
Hyperelastic Energy Densities for Soft Biological Tissues: A Review Grégory Chagnon,Marie Rebouah,Denis Favier Journal of Elasticity, 2015, 120 (2), pp.129-160. ⟨10.1007/s10659-014-9508-z⟩ Article dans une revue hal-01480510v1
Superelastic cellular NiTi tube-based materials: Fabrication, experiments and modeling Guilherme Machado,Hervé Louche,Thierry Alonso,Denis Favier Materials & Design, 2015, 65, pp.212-220. ⟨10.1016/j.matdes.2014.09.007⟩ Article dans une revue hal-01285370v1
Development and modeling of filled silicone architectured membranes Marie Rebouah,Grégory Chagnon,Denis Favier Meccanica, 2015, 50 (1), pp.11-24. ⟨10.1007/s11012-014-0065-0⟩ Article dans une revue hal-01480381v1
Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour Vincent Delobelle,Grégory Chagnon,Denis Favier,Thierry Alonso Journal of Materials Processing Technology, 2015, 227, pp.244-250. ⟨10.1016/j.jmatprotec.2015.08.011⟩ Article dans une revue hal-01480523v1
Radiopaque poly(e-caprolactone) as additive for X-ray imaging of temporary implantable medical devices Rémi Samuel,Edouard Girard,Grégory Chagnon,Stéphane Dejean,Denis Favieret al. RSC Advances, 2015, 5, pp.84125-84133. ⟨10.1039/c5ra19488a⟩ Article dans une revue hal-01369275v1
Anisotropic large deformation of geometrically architectured unfilled silicone membranes Luc Meunier,Grégory Chagnon,Denis Favier,Laurent Orgéas European Journal of Mechanics - A/Solids, 2015, 50, pp.87-99. ⟨10.1016/j.euromechsol.2014.11.002⟩ Article dans une revue hal-01480397v1
Theory and identification of a constitutive model of induced anisotropy by the Mullins effect Guilherme Machado,Grégory Chagnon,Denis Favier Journal of the Mechanics and Physics of Solids, 2014, 63, pp.29-39. ⟨10.1016/j.jmps.2013.10.008⟩ Article dans une revue hal-00958608v1
Hyperelasticity with rate-independent microsphere hysteresis model for rubberlike materials Thierry Rey,Grégory Chagnon,Denis Favier,Jean-Benoit Le Cam Computational Materials Science, 2014, 90, pp.89-98. ⟨10.1016/j.commatsci.2014.03.068⟩ Article dans une revue hal-01063253v1
Numerical study on the effect of the paint layer used for infrared thermography on heat source estimation Vincent Delobelle,Hervé Louche,D Favier Quantitative InfraRed Thermography Journal, 2014, 11 (2), pp.233-249. ⟨10.1080/17686733.2014.971618⟩ Article dans une revue hal-01280470v1
Mechanical characterization and comparison of different NiTi/silicone rubber interfaces Thierry Rey,Florence Razan,Eric Robin,Sylvain Faure,Jean-Benoît Le Camet al. International Journal of Adhesion and Adhesives, 2014, 48, pp.67-74. ⟨10.1016/j.ijadhadh.2013.09.028⟩ Article dans une revue hal-00963798v1
NiTi based stent for the treatment of acute urinary retention due to benign prostatic hyperplasia: a preliminary study on NiTi wires and tubes under pure bending Gabriel Antherieu,Nathanaël Connesson,Yohan Payan,Denis Favier,Pierre Mozer Computer Methods in Biomechanics and Biomedical Engineering, 2014, 17, pp.190 - 191. ⟨10.1080/10255842.2014.931679⟩ Article dans une revue hal-01108621v1
An original architectured NiTi silicone rubber structure for biomedical applications Thierry Rey,Jean-Benoit Le Cam,Grégory Chagnon,Denis Favier,Marie Rebouahet al. Materials Science and Engineering: C, 2014, 45, pp.184-190. ⟨10.1016/j.msec.2014.08.062⟩ Article dans une revue hal-03690559v1
Young’s Modulus of Austenite and Martensite Phases in Superelastic NiTi Wires Petr Šittner,Ludek Heller,Jan Pilch,Caroline Curfs,Thierry Alonsoet al. Journal of Materials Engineering and Performance, 2014, 23 (7), pp.2303-2314. ⟨10.1007/s11665-014-0976-x⟩ Article dans une revue hal-02022634v1
A conical mandrel tube drawing test designed to assess failure criteria Camille Linardon,Denis Favier,Grégory Chagnon,Benoit Gruez Journal of Materials Processing Technology, 2014, pp.347-357. ⟨10.1016/j.jmatprotec.2013.09.021⟩ Article dans une revue hal-00936544v1
Heat Estimation from Infrared Measurement Compared to DSC for Austenite to R Phase Transformation in a NiTi Alloy Vincent Delobelle,Denis Favier,Hervé Louche Journal of Materials Engineering and Performance, 2013, 22 (6), pp.1688-1693. ⟨10.1007/s11665-012-0466-y⟩ Article dans une revue hal-01300481v1
Cold drawing of 316L stainless steel thin-walled tubes: experiments and finite element analysis Muriel Palengat,Grégory Chagnon,Denis Favier,Hervé Louche,Camille Linardonet al. International Journal of Mechanical Sciences, 2013, 70, pp.69-78. ⟨10.1016/j.ijmecsci.2013.02.003⟩ Article dans une revue hal-00936527v1
Resistance welding of NiTi shape memory alloy tubes Vincent Delobelle,Patrick Delobelle,Yehan Liu,D. Favier,Hervé Louche Journal of Materials Processing Technology, 2013, 213, pp.1139-1145. ⟨10.1016/j.jmatprotec.2013.01.013⟩ Article dans une revue istex hal-00835925v1
Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers Thierry Rey,G. Chagnon,Jean-Benoit Le Cam,Denis Favier Polymer Testing, 2013, 32 (3), pp.492 - 501. ⟨10.1016/j.polymertesting.2013.01.008⟩ Article dans une revue hal-01073891v1
Anisotropic Mullins stress softening of a deformed silicone holey plate Marie Rebouah,Guilherme Machado,Grégory Chagnon,Denis Favier Mechanics Research Communications, 2013, 49, pp.36-43. ⟨10.1016/j.mechrescom.2013.02.002⟩ Article dans une revue hal-01974917v1
An osmotically inflatable seal to treat endoleaks of type 1, following endovascular aneurysm repair Grégory Chagnon,Vincent Gaudin,Denis Favier,Laurent Orgéas,Philippe Cinquin Journal of Mechanics in Medicine and Biology, 2012, 12 (4), pp.1250070. ⟨10.1142/S0219519412004958⟩ Article dans une revue hal-01974834v1
Membrane Curvatures and Stress-strain Full Fields of Axisymmetric Bulge Tests from 3D-DIC Measurements. Theory and Validation on Virtual and Experimental results Guilherme Machado,Denis Favier,Grégory Chagnon Experimental Mechanics, 2012, 52 (7), pp.865-880. ⟨10.1007/s11340-011-9571-3⟩ Article dans une revue istex hal-01974147v1
Induced anisotropy by the Mullins effect in filled silicone rubber Guilherme Machado,Grégory Chagnon,Denis Favier Mechanics of Materials, 2012, 50, pp.70-80. ⟨10.1016/j.mechmat.2012.03.006⟩ Article dans une revue hal-01974831v1
Rheometry of compression moulded fibre-reinforced polymer composites: Rheology, compressibility, and friction forces with mould surfaces O. Guiraud,P.J.J. Dumont,L. Orgéas,D. Favier Composites Part A: Applied Science and Manufacturing, 2012, 43 (11), pp.2107-2119. ⟨10.1016/j.compositesa.2012.06.006⟩ Article dans une revue istex hal-05125560v1
Heat Source Processing for Localized Deformation With Non-Constant Thermal Conductivity. Application to Superelastic Tensile Tests of NiTi Shape Memory Alloys Hervé Louche,Pauline Schlosser,Denis Favier,Laurent Orgéas Experimental Mechanics, 2012, 52 (9), pp.1313-1328. ⟨10.1007/s11340-012-9607-3⟩ Article dans une revue hal-00787054v1
Assessment of tension-compression asymmetry of NiTi using circular bulge testing of thin plates Vincent Grolleau,Hervé Louche,Vincent Delobelle,A. Penin,Gérard Rioet al. Scripta Materialia, 2011, 65 (4), pp.347-350. ⟨10.1016/j.scriptamat.2011.05.003⟩ Article dans une revue istex hal-00757982v1
Analysis of the isotropic models of the Mullins effect based on filled silicone rubber experimental results Guilherme Machado,Grégory Chagnon,Denis Favier Mechanics of Materials, 2010, 42 (9), pp.841-851. ⟨10.1016/j.mechmat.2010.07.001⟩ Article dans une revue hal-01974135v1
A numerical analysis of the evolution of bundle orientation in concentrated fibre-bundle suspensions Pierre J.J. Dumont,Steven Le Corre,Laurent Orgéas,Denis Favier Journal of Non-Newtonian Fluid Mechanics, 2009, 160 (2-3), pp.76-92. ⟨10.1016/j.jnnfm.2009.03.001⟩ Article dans une revue hal-01004927v1
Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber Luc Meunier,Grégory Chagnon,Denis Favier,Laurent Orgéas,Pierre Vacher Polymer Testing, 2008, 27, pp.765-777. ⟨10.1016/j.polymertesting.2008.05.011⟩ Article dans une revue hal-00328231v1
Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements Pauline Schlosser,Denis Favier,Hervé Louche,Laurent Orgéas Advances in Science and Technology, 2008, 59, pp.140-149. ⟨10.4028/3-908158-16-8.140⟩ Article dans une revue hal-00336736v1
X-ray phase contrast microtomography for the analysis of the fibrous microstructure of SMC composites Thaihung Le,Pierre J.J. Dumont,L. Orgéas,D. Favier,Luc Salvoet al. Composites Part A: Applied Science and Manufacturing, 2008, 39, pp.91-103. ⟨10.1016/j.compositesa.2007.08.027⟩ Article dans une revue hal-00374957v1
Lubricated compression of BMC, a concentrated and fibre-reinforced granular polymer suspension Laurent Orgéas,Pierre J.J. Dumont,Thai-Hung Le,Denis Favier Rheologica Acta, 2008, 47 (5-6), pp.677-688. ⟨10.1007/s00397-008-0276-1⟩ Article dans une revue istex hal-00449005v1
Processing, characterization and rheology of transparent concentrated fibre-bundle suspensions Pierre J.J. Dumont,Jean-Pierre Vassal,Laurent Orgéas,Véronique Michaud,Denis Favieret al. Rheologica Acta, 2007, 46 (5), pp.639-651. ⟨10.1007/s00397-006-0153-8⟩ Article dans une revue istex hal-00292089v1
Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-50.8 at% Ni thin tube under tension. Investigation via temperature and strain fields measurements Denis Favier,Hervé Louche,Pauline Schlosser,Laurent Orgéas,Pierre Vacheret al. Acta Materialia, 2007, 55 (16), pp.5310-5322. ⟨10.1016/j.actamat.2007.05.027⟩ Article dans une revue hal-00336739v1
Image processing to estimate the heat sources related to phase transformations durint tensile test of NiTi tubes Pauline Schlosser,Hervé Louche,Denis Favier,Laurent Orgéas Strain, 2007, 43, pp.260-271. ⟨10.1111/j.1475-1305.2007.00350.x⟩ Article dans une revue istex hal-00180898v1
Compression moulding of SMC: in situ experiments, modelling and simulation Pierre J.J. Dumont,Laurent Orgéas,Denis Favier,Patrick Pizette,Cécile Venet Composites Part A: Applied Science and Manufacturing, 2007, 38A (2), pp.353-368. ⟨10.1016/j.compositesa.2006.03.010⟩ Article dans une revue hal-00292081v1
Influence of thermomechanical processing on the superelastic properties of a Ni-rich nitinol shape memory alloy D. Favier,Yehan Liu,L. Orgeas,Arnaud Sandel,L. Deboveet al. Materials Science and Engineering: A, 2006, pp.130-136 Article dans une revue hal-00383401v1
Une approche multi-échelle de la rhéologie des suspensions concentrées de fibres Steven Le Corre,Pierre J.J. Dumont,Laurent Orgéas,Denis Favier Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2005, 15 (3), pp.355-369. ⟨10.3166/rcma.15.355-369⟩ Article dans une revue hal-01007422v1
Behavior of a net of fibers linked by viscous interactions: theory and mechanical properties Steven Le Corre,Denis Caillerie,Laurent Orgéas,Denis Favier Journal of the Mechanics and Physics of Solids, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩ Article dans une revue hal-00531571v1
Hysteretic behavior of a CuZnAl single crystal during super elastic shear deformation Laurent Orgéas,Alexandre Vivet,Denis Favier,Christian Lexcellent,Yehan Liu Scripta Materialia, 2004, 51 (4), pp. 297-302. ⟨10.1016/j.scriptamat.2004.04.033⟩ Article dans une revue istex hal-00019772v1
Behaviour of a net of fibers linked by viscous interactions: theory and mechanical properties Steven Le Corre,Denis Caillerie,Laurent Orgéas,Denis Favier Journal of the Mechanics and Physics of Solids, 2004, 52 (2), pp.395-421. ⟨10.1016/S0022-5096(03)00090-5⟩ Article dans une revue hal-01005308v1
Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding Pierre J.J. Dumont,Laurent Orgéas,Steven Le Corre,Denis Favier International Journal of Plasticity, 2003, 19 (5), pp.625-646. ⟨10.1016/S0749-6419(01)00077-8⟩ Article dans une revue hal-01005261v1
Shear and compression behaviour of sheet moulding compounds Steven Lecorre,Laurent Orgéas,Denis Favier,Ali Tourabi,Abderrahim Maazouzet al. Composites Science and Technology, 2002, 62 (4), pp.571 - 577. ⟨10.1016/S0266-3538(01)00151-8⟩ Article dans une revue hal-01007302v1
Un modèle biphasique pour simuler la mise en forme par compression des composites à fibres courtes Pierre J.J. Dumont,Steven Le Corre,Laurent Orgeas,Denis Favier Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2002, 12 (3), pp.477-497. ⟨10.3166/rcma.12.477-497⟩ Article dans une revue hal-01007421v1
Experimental Study of Mechanical Hysteresis of NiTi During Ferroelastic and Superelastic Deformation L. Orgéas,Yehan Liu,D. Favier Journal de Physique IV Proceedings, 1997, 07 (C5), pp.C5-477-C5-482. ⟨10.1051/jp4:1997575⟩ Article dans une revue jpa-00255675v1
Finite Element Simulations of Internal Stresses Generated During the Ferroelastic Deformation of NiTi Bodies P. Manach,D. Favier,G. Rio Journal de Physique IV Proceedings, 1996, 06 (C1), pp.C1-235-C1-244. ⟨10.1051/jp4:1996123⟩ Article dans une revue istex jpa-00254155v1
Finite Elements Simulation of Mechanical Behaviour of Shape Memory Alloys Coupled with a Non-Stationary Thermal Field G. Rio,D. Favier,H. Desplats Journal de Physique IV Proceedings, 1995, 05 (C8), pp.C8-215-C8-220. ⟨10.1051/jp4:1995829⟩ Article dans une revue jpa-00254078v1
Finite element simulation of 3D mechanical behaviour of NiTi shape memory alloys Gérard Rio,Pierre-Yves Manach,Denis Favier Archives of Mechanics, 1995, 47 (3), pp.537-556 Article dans une revue hal-00648791v1
Influence of Prior Thermomechanical Treatment on the Training Behaviour of a NiTi Alloy D. Favier,Yehan Liu,P. Manach Journal de Physique IV Proceedings, 1995, 05 (C2), pp.C2-391-C2-396. ⟨10.1051/jp4:1995260⟩ Article dans une revue jpa-00253645v1
Application of the Beam Theory to Model the Pseudoelastic and Ferroelastic Bending of SMA Beams L. Orgeas,D. Favier Journal de Physique IV Proceedings, 1995, 05 (C2), pp.C2-519-C2-524. ⟨10.1051/jp4:1995280⟩ Article dans une revue jpa-00253666v1
EXPERIMENTAL STUDY FOR THE IDENTIFICATION OF A TENSORIAL SCHEME FOR SHAPE MEMORY ALLOYS P. Manach,D. Favier Journal de Physique IV Proceedings, 1991, 01 (C4), pp.C4-415-C4-420. ⟨10.1051/jp4:1991462⟩ Article dans une revue jpa-00250616v1

Communication dans un congrès (102)

Mechanical behavior of structured electrospun scaffolds dedicated to soft tissue engineering: from experimental characterization to simulation Frédéric Bossard,Hugues Mondésert,D. Favier Europolymer Conference 2019 (EUPOC 2019), May 2019, Como, Italy Communication dans un congrès hal-04767110v1
An experimental set-up to perform uniform tensile tests of superelastic NiTi tubes or wires Thierry Alonso,Denis Favier,Nathanaël Connesson International Conference on Shape Memory and Superelastic Technologies (SMST), May 2019, Konstanz, Germany Communication dans un congrès hal-02133239v1
Elaboration of honeycomb micropatterned fibrous scaffolds by electrospinning with anisotropic mechanical properties for soft tissue engineering Hugues Mondésert,Frédéric Bossard,D Favier Europolymer Conference 2019 (EUPOC 2019), May 2019, Como, Italy Communication dans un congrès hal-04767120v1
Influence Of Heat Treatment Temperature On Tension, Compression And Bending Behavior Of Nanostructured NiTi Wires Nathanaël Connesson,Gabriel Antherieu,Thierry Alonso,Denis Favier The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany Communication dans un congrès hal-02314555v1
Thermomechanical analysis of the deformation in tension of a nanocrystalline superelastic NiTi thin wire Henrique Martinni Ramos de Oliveira,Hervé Louche,Denis Favier 10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy Communication dans un congrès hal-01816031v1
Anisotropy and temperature dependence of superelastic behavior of NiTi shape memory alloy thin walled tubes Estephanie Nobre Dantas Grassi,Denis Favier,Grégory Chagnon 10th European Solid Mechanics Conference, Jul 2018, Bologne, Italy Communication dans un congrès hal-01872398v1
Influence of anisotropy on strain localization phenomenon in tension of superelastic NiTi thin walled tubes Estephanie Nobre Dantas Grassi,Denis Favier,Grégory Chagnon European Symposium on Martensitic Transformations, Aug 2018, Metz, France Communication dans un congrès hal-01872343v1
Method to extract Stress-Strain functions from pure torsion/bending experimental tests Nathanaël Connesson,Gabriel Antherieu,Denis Favier EMMC16 16th European Mechanics of Materials Conference, Mar 2018, Nantes, France Communication dans un congrès hal-02006079v1
Anisotropic tensile behavior of NiTi Tubes and its dependence on temperature experimental results Estephanie Nobre Dantas Grassi,Denis Favier,Grégory Chagnon International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States Communication dans un congrès hal-01872416v1
How the evolution of the dynamic elastic modulus during isothermal tensile tests can bring new information on mechanisms deformation of a NiTi superelastic wire Thierry Alonso,Denis Favier,Grégory Chagnon International Conference on Shape Memory and Superelastic Technologies (SMST), May 2017, San Diego, United States Communication dans un congrès hal-01872409v1
Experimental investigation of anisotropic mechanical behavior of ex vivo human urethral tissues Christopher Masri,Grégory Chagnon,Denis Favier 15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium Communication dans un congrès hal-01872440v1
Anisotropic thermomechanical properties of a superelastic Nickel-Titane thin tube Estephanie Nobre Dantas Grassi,Denis Favier,Grégory Chagnon 15th European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium Communication dans un congrès hal-01872428v1
METHOD TO EXTRACT STRESS-STRAIN FUNCTIONS FROM PURE TORSION OR PURE BENDING EXPERIMENTAL TESTS Nathanaël Connesson,Gabriel Antherieu,Denis Favier 17th International Conference on Experimental Mechanics (ICEM17), Jul 2016, Rhodes, Greece Communication dans un congrès hal-02006055v1
Caractérisation mécanique In Vitro de tissus mous Christopher Masri,Grégory Chagnon,Denis Favier,Edouard Girard MECAMAT 2016, Jan 2016, Aussois, France Communication dans un congrès hal-01807463v1
Internal heat sources and transformation enthalpy of a nanostructured superelastic NiTi wire Henrique Martinni Ramos de Oliveira,Hervé Louche,Denis Favier EMMC15, Sep 2016, Bruxelles, Belgium Communication dans un congrès hal-01772389v1
Lois hyper-viscoélastiques anisotropes des élastomères architecturès aux tissus du vivant Grégory Chagnon,Denis Favier,Luc Meunier,Guilherme Machado,Marie Rebouahet al. Groupe de travail Mécanique des Polymères, Mar 2016, Paris, France Communication dans un congrès hal-01986502v1
Modelling of mechanical properties of a PLA-b-PEG-b-PLA biodegradable triblock copolymer during hydrolytic degradation Quentin Breche,Edouard Girard,Guilherme Machado,Grégory Chagnon,Denis Favieret al. European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium Communication dans un congrès hal-01872434v1
Développement et modélisation de membranes silicones architecturées Grégory Chagnon,Marie Rebouah,Denis Favier 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01514292v1
Elaboration, modélisation et simulation de membranes architecturées Marie Rebouah,Grégory Chagnon,Denis Favier 22e Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-01807467v1
Use of digital image correlation to analyse a membrane bulge test Grégory Chagnon,Guilherme Machado,Denis Favier Flexible Materials and Large Deformations, May 2015, Rennes, France Communication dans un congrès hal-01986504v1
Development and characterization of architectured silicone membranes Grégory Chagnon,Arthur Stricher,Guilherme Machado,R.G. Rinaldi,François Ganachaudet al. 9th European Solid Mechanics Conference (ESMC 2015), Jul 2015, Madrid, Spain Communication dans un congrès hal-01872476v1
Evolution du comportement viscoélastique de copolymères triblocs PLA-PEG-PLA au cours de la dégradation par hydrolyse Quentin Breche,Edouard Girard,Benjamin Nottelet,Xavier Garric,Guilherme Machadoet al. 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-01872452v1
Modeling of mechanical properties of silicone elastomers Grégory Chagnon,Guilherme Machado,Marie Rebouah,Thierry Rey,Denis Favier 10th International Workshop on Silicon-Based Polymers, Apr 2015, Aussois, France Communication dans un congrès hal-01986507v1
Caractérisation et modélisation de polymères PVA Christopher Masri,Géraldine Penven,Grégory Chagnon,Denis Favier 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-01872446v1
Biaxial testing of Knitted NiTi textiles: adapted image processing vs DIC Nathanaël Connesson,François Tissot,Denis Favier,Ludek Heller Photomechanics 2015, May 2015, Delf, Netherlands Communication dans un congrès hal-02006098v1
An innovative NiTi based stent as an emergency treatment for acute urinary retention in case of benign prostatic hyperplasia Gabriel Antherieu,Yohan Payan,Denis Favier,Nathanaël Connesson,Pierre Mozer Surgetica 2014, 2014, Chambéry, France Communication dans un congrès hal-01092754v1
Multimaterials and Architectured Materials for Medical Applications Nathanaël Connesson,Grégory Chagnon,Denis Favier,Thierry Alonso,Quentin Brecheet al. Architectured Biomaterials, Medical and Tissue Engineering, Dec 2014, Berlin, Germany Communication dans un congrès hal-01872503v1
Etude de l'interface NiTi/silicone Thierry Rey,Jean-Benoit Le Cam,Grégory Chagnon,Denis Favier 3e journée thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France Communication dans un congrès hal-01079804v1
Alliages à mémoire de forme Nickel-Titane architecturés et à gradient. Applications médicales Denis Favier,Thierry Alonso,Gabriel Antherieu,Grégory Chagnon,Nathanaël Connessonet al. Entretiens Jacques Cartier, Oct 2014, Montréal, Canada Communication dans un congrès hal-01872510v1
Développement et caractérisation mécanique de membranes silicone architecturées Guilherme Machado,Arthur Stricher,R.G. Rinaldi,François Ganachaud,Denis Favieret al. 3ème Journée Thématique sur la caractérisation mécanique des élastomères : nouvelles approches, Sep 2014, Nantes, France Communication dans un congrès hal-01079792v1
Modélisation de l'adoucissement anisotrope dans le comportement hyperélastique des milieux du vivant Guilherme Machado,Marie Rebouah,Grégory Chagnon,Denis Favier GDR Mécanotransduction, Sep 2013, Grenoble, France Communication dans un congrès hal-01872528v1
Modeling of hysteresis by means of a directional approach. Constitutive Models Thierry Rey,Grégory Chagnon,Denis Favier,Jean-Benoit Le Cam 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sabastian, Spain. pp.107-110 Communication dans un congrès hal-00936538v1
Etude du comportement thermomécanique d'un fil fin de NiTi par spectromètre dynamique mécanique et thermique Thierry Alonso,Denis Favier,Grégory Chagnon 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France. pp.1-6 Communication dans un congrès hal-00963807v1
Architectured biomaterials for medical devices Nathanaël Connesson,Grégory Chagnon,Denis Favier,Thierry Alonso,Marie Rebouahet al. Architectured biomaterials for medical devices, Sep 2013, Grenoble, France Communication dans un congrès hal-01872546v1
FE Modeling of NiTi Elastomeric Composites for Use as Biomaterials François Tissot,Denis Favier,Nathanaël Connesson,Grégory Chagnon,Thierry Reyet al. Shape Memory and Superelastic Technologies, May 2013, Prague, Czech Republic Communication dans un congrès hal-01872597v1
Effects of temperature on the mechanical behavior of filled and unfilled silicone rubbers Thierry Rey,Grégory Chagnon,Jean-Benoit Le Cam,Denis Favier 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.511-514 Communication dans un congrès hal-00936536v1
Development of constitutive equation of filled silicone architectured membrane Marie Rebouah,Grégory Chagnon,Denis Favier 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435 Communication dans un congrès hal-00936541v1
An original method to estimate local thermophysical properties and latent heat from Thermal Field Measurement (TFM) Vincent Delobelle,Denis Favier,Hervé Louche,N. Connesson PhotoMechanics Conference, May 2013, Montpellier, France. pp.149-151 Communication dans un congrès hal-00942926v1
Dynamic Mechanical Spectroscopy of Nanograined Thin NiTi Wires Thierry Alonso,Denis Favier,Grégory Chagnon,Petr Sittner,Liu Yinong The International Conference on Shape Memory and Superelastic Technologies (SMST), May 2013, Prague, Czech Republic Communication dans un congrès hal-01872585v1
Design of specific experimental tests to evaluate formability prediction of cold drawing CoCr Tubes Camille Linardon,Denis Favier,Grégory Chagnon,Benoit Gruez Plasticity, Jan 2013, Nassau, Bahamas Communication dans un congrès hal-01978923v1
Anisotropic modeling of the Mullins effect and the residual strain of filled silicone rubber Marie Rebouah,Grégory Chagnon,Denis Favier 8th European Conference on Constitutive Models for Rubbers, Jun 2013, San Sebastian, Spain. pp.431-435 Communication dans un congrès hal-00936540v1
Validation d'un modèle anisotrope de l'effet Mullins par l'étude d'une plaque trouée en silicone chargé Marie Rebouah,Guilherme Machado,Grégory Chagnon,Denis Favier 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France Communication dans un congrès hal-01875143v1
Measurement by DMA in Tension of Elastic Moduli and Transformation Behaviour of fine Nitinol Medical Wires as function of Stress and Temperature Thierry Alonso,Denis Favier,Grégory Chagnon,Petr Sittner 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria Communication dans un congrès hal-01875138v1
Modelling of the Induced Anisotropy by Mullins Effect Guilherme Machado,Marie Rebouah,Grégory Chagnon,Denis Favier 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria Communication dans un congrès hal-01875137v1
Caractérisation de l’anisotropie de l’effet Mullins sur des essais non classiques Guilherme Machado,Grégory Chagnon,Denis Favier 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France Communication dans un congrès hal-01875140v1
Comparison of LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) with classic Tensile Tests. Emmanuel Promayon,Vincent Luboz,Grégory Chagnon,Thierry Alonso,Denis Favieret al. Advanced experimental approaches and inverse problems in tissue biomechanics., 2012, Saint-Etienne, France. pp.75-76 Communication dans un congrès hal-00705487v1
Mechanical behaviour of architectured NiTi materials in complex loading Denis Favier,Thierry Alonso,Grégory Chagnon,Vincent Delobelle,Hervé Loucheet al. CIMTEC, Jun 2012, Montecatini Terme, Italy Communication dans un congrès hal-00809087v1
Experimental characterization and modeling of the mechanical behavior of architectured tube-based NiTi materials Guilherme Machado,Hervé Louche,Denis Favier,Yehan Liu Archimat 2012, Oct 2012, Prague, Czech Republic Communication dans un congrès hal-00809144v1
Modelling of the behaviour of filled silicone architectured membrane Marie Rebouah,Grégory Chagnon,Denis Favier Archimat - Architectured Materials Workshop, Oct 2012, Prague, Czech Republic Communication dans un congrès hal-01875136v1
Validation de LASTIC (Light Aspiration device for in vivo Soft TIssue Characterization) sur des élastomères Vincent Luboz,Emmanuel Promayon,Grégory Chagnon,Thierry Alonso,Christine Barthodet al. 2e Journée thématique sur la caractérisation mécanique des élastomères, May 2012, Grenoble, France. pp.1 Communication dans un congrès hal-00739433v1
Experiments and modeling of smart silicone elastomer membranes reinforced with shaped NiTi textiles François Tissot,Thierry Rey,Ludek Heller,Nathanaël Connesson,Grégory Chagnonet al. 8th EUROMECH - Solid Mechanics Conference, Jul 2012, Graz, Austria Communication dans un congrès hal-01875139v1
Influence de la température sur le comportement mécanique d' un élastomère silicone chargé Thierry Rey,Grégory Chagnon,Jean-Benoit Le Cam,Denis Favier 2ème Journée thématique sur la Caractérisation Mécanique des Elastomères, May 2012, Grenoble, France Communication dans un congrès hal-01875141v1
EXPERIMENTAL AND NUMERICAL STUDY OF NITI HOLEY PLATES LOADED IN TENSION Christophe Cellard,Gérard Rio,Shariat Bashir S.,Yinong Liu,Vincent Grolleauet al. ESOMAT 2012, Sep 2012, Sankt Peterburg, Russia Communication dans un congrès hal-00761157v1
Validation expérimentale d'estimations de sources de chaleur - Cas uniforme Vincent Delobelle,Denis Favier,Hervé Louche CFM, Aug 2011, Besançon, France Communication dans un congrès hal-00813097v1
Determination of heat capacity and thermal conductivity of NiTi Vincent Delobelle,Denis Favier,Hervé Louche International Conference on Martensitic Transformations (ICOMAT), Sep 2011, Osaka, Japan Communication dans un congrès hal-00811428v1
Experimental validation of heat source field estimations Hervé Louche,Vincent Delobelle,Denis Favier Photomechanics 2011, Feb 2011, Belgium Communication dans un congrès hal-00809159v1
Anisotropy of the Mullins effect in particle-reinforced silicone rubber Grégory Chagnon,Guilherme Machado,Denis Favier Archimat 2011, May 2011, Autrans, France Communication dans un congrès hal-01875145v1
Use of resistance welding to join NiTi SMAs tubes Vincent Delobelle,Denis Favier,Hervé Louche Archimat 2011, May 2011, Grenoble, France Communication dans un congrès hal-00809256v1
Simulation of Drawing of Small Stainless Steel Platinum Medical Tubes-Influence of the Tool Parameters on the Forming Limit Camille Linardon,Jean-Sébastien Affagard,Grégory Chagnon,Denis Favier,Benoit Gruez THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011, Apr 2011, Belfast, Ireland. ⟨10.1063/1.3589553⟩ Communication dans un congrès hal-01978919v1
From the experimental determination of stress-strain full fields during a bulge test thanks to 3D-DIC technique to the characterization of anisotropic Mullins effect Guilherme Machado,Denis Favier,Grégory Chagnon 7th European Conference on Constitutive Models for Rubber, Sep 2011, Dublin, Ireland Communication dans un congrès hal-01978920v1
A new approach to estimate heat fields during stress or temperature induced phase transformation on a NiTi SMA - Experimental validation Vincent Delobelle,Hervé Louche,Denis Favier International Conference on Shape Memory and Superelastic Technologies (SMST), Nov 2011, Hong Kong SAR China Communication dans un congrès hal-00811423v1
Déformation en flexion d'une aiguille médicale dans les tissus mous Thierry Alonso,Grégory Chagnon,Denis Favier Mecamat, Jan 2010, Aussois, France Communication dans un congrès hal-01978918v1
Analyse complète du bulge test grâce aux mesures 3D des champs de déplacements par stéréo-corrélation Guilherme Machado,Grégory Chagnon,Denis Favier Journée thématique sur la Caractérisation Mécanique des Elastomères 2010, Jun 2010, Clermont-Ferrand, France Communication dans un congrès hal-01875146v1
Anisotropy of the Mullins effect in particle-reinforced silicone rubber Guilherme Machado,Grégory Chagnon,Denis Favier Mecamat, Jan 2010, Aussois, France Communication dans un congrès hal-01978916v1
Microtomographie à rayons X et essais d'extraction pour caractériser les contacts fibre-fibre dans des composites à fibres courtes lors de leur mise en forme = X-ray microtomography and pull-out test to characterise fibre-fibre contacts in short fibre-reinforced composites during their processing Olivier Guiraud,Laurent Orgéas,Pierre J.J. Dumont,Denis Favier JNC 16, Jun 2009, Toulouse, France. 10 p Communication dans un congrès hal-00394723v1
Membranes élastomères anisotropie contrôlée par le design de microstructures locales. Applications à des muscles artificiels. Luc Meunier,Grégory Chagnon,Denis Favier,Laurent Orgéas,Pierre Vacher forum d'innovations - Matériaux, Nouveaux Concepts, Apr 2009, Le Bourget du Lac, France Communication dans un congrès hal-01986514v1
Experimental Observation of Induced Anisotropy of the Mullins effect in particle-reinforced silicone rubber Guilherme Machado,Grégory Chagnon,Denis Favier HETMAT, 2009, Budapest, Hungary Communication dans un congrès hal-01875148v1
A multiscale approach to model the mechanical behaviour of heterogeneous hyperelastic membranes Luc Meunier,Laurent Orgéas,Grégory Chagnon,Denis Favier Sixth European conference on constitutive models for rubber, Sep 2009, Dresde, Germany. pp.429-434 Communication dans un congrès hal-01395961v1
Thermomechanical modelling of cold drawing processes of small diameter tubes Muriel Palengat,Pierre Latil,Grégory Chagnon,Denis Favier,Hervé Loucheet al. 7th EUROMECH - Solid Mechanics Conference, 2009, Lisbonne, Portugal Communication dans un congrès hal-01875152v1
Thermomechanical modelling of cold drawing processes of Co-Cr small diameter tubes Muriel Palengat,Grégory Chagnon,Denis Favier,Christelle Plaideau Materials & Processes for Medical Devices Conference, 2009, Minneapolis, United States Communication dans un congrès hal-01875149v1
Experimental observation of induced anisotropy of the Mullins effect in particle-reinforced silicone rubber Guilherme Machado,Grégory Chagnon,Denis Favier SIXTH EUROPEAN CONFERENCE ON CONSTITUTIVE MODELS FOR RUBBER, Sep 2009, Dresde, Germany. pp.511-515 Communication dans un congrès hal-01395960v1
Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements Pauline Schlosser,Denis Favier,Hervé Louche,Laurent Orgéas 3st Int. Conf. Smart Materials structure systems (CIMTEC 2008), Invited speaker, Jun 2008, France Communication dans un congrès hal-00344254v1
Temperature full-field measurement and heat sources estimation during superelastic tests of NiTi samples Pauline Schlosser,Hervé Louche,Denis Favier,Laurent Orgéas Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy Communication dans un congrès hal-00344275v1
Détermination du coefficient de frottement par analyse inverse pour l'étirage de tube Muriel Palengat,Olivier Guiraud,Christophe Millet,Grégory Chagnon,Denis Favier Mecmat, Jan 2008, Aussois, France Communication dans un congrès hal-01978986v1
Conduction in composites with highly conductive short fibres: comparison between experiments, discrete element simulation and analytical solution Pierre J.J. Dumont,D. Favier,V. Michaud,Laurent Orgéas,J.P. Vassal ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 2012 Communication dans un congrès hal-00454996v1
Experimental study of segregation phenomena during compression of glass mat thermoplastics (GMT) Pierre J.J. Dumont,D. Favier,V. Michaud,Laurent Orgéas 9th International Conference on Flow Processes in Composite Materials (FPCM9), Jul 2008, Montréal, Canada Communication dans un congrès hal-00449656v1
Segretation phenomena between the polymer matrix and the fibrous reinforcement of glass mat thermoplastics (GMT) during compression moulding Pierre J.J. Dumont,D. Favier,V. Michaud,Laurent Orgéas ESAFORM Conference, Apr 2008, Lyon, France Communication dans un congrès hal-00453418v1
Modelling and simulation of the rheology of bulk moulding compounds (BMC) during mould filling Pierre J.J. Dumont,D. Favier,T.H. Le,Laurent Orgéas,O. Guiraud ECCM 13 Conference, Jun 2008, Stockholm, Sweden. Paper n° 1611 Communication dans un congrès hal-00449661v1
Elastohysteresis: an accurate phenomenological model for pseudoelasticity and ferroelasticity 3d simulation of shape memory alloys under complex loadings Gérard Rio,D. Favier,Yehan Liu International Conference on Shape Memory and Superelastic Technologies, 2008, Stresa, Italy Communication dans un congrès hal-00404088v1
Modélisation et simulation de la rhéologie de suspensions de fibres concentrées modèles lors de leur mise en forme Pierre J.J. Dumont,D. Favier,O. Guiraud,Laurent Orgéas,J.P. Vassal Colloque National MECAMAT, Jan 2008, Aussois, France Communication dans un congrès hal-00507341v1
Is the tensile test relevant to characterize NiTi shape memory alloy behaviour? Pauline Schlosser,Denis Favier,Hervé Louche,Laurent Orgéas,Yehan Liu Int. Conference for Shape Memory and Superelastic Technologies (SMST), Sep 2008, Stresa, Italy Communication dans un congrès hal-00344267v1
Rhéologie de suspensions modèles transparentes et très concentrées de fibres. Analyse par un rhéomètre transparent de compression en déformation plane Pierre J.J. Dumont,D. Favier,O. Guiraud,Laurent Orgéas,J.P. Vassal Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.41-44 Communication dans un congrès hal-00455015v1
Modélisation de l'écoulement et des évolutions de microstructures des suspensions très concentrées de fibres Pierre J.J. Dumont,D. Favier,Laurent Orgéas,S. Le Corre Rhéologie et Thermodynamique. 43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. pp.45-48 Communication dans un congrès hal-00455009v1
Strain and thermal Heterogeneities analyse during superelastic deformation of polycrystalline NiTi tube Pauline Schlosser,Denis Favier,Hervé Louche,Laurent Orgéas,P. Comte-Gaz ASME Applied Mechanics and Materials Conference (McMat 2007), Jun 2007, Austin, United States Communication dans un congrès hal-00344270v1
Modélisation de l'étirage à froid de tubes par analyse éléments-finis Muriel Palengat,Grégory Chagnon,Christophe Millet,Denis Favier CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France Communication dans un congrès hal-01978980v1
Physical mechanisms of the deformation of a polycrystalline Ni-Ti thin tube under tension studied through full-field measurements Denis Favier,Hervé Louche,Pauline Schlosser,Laurent Orgéas McMat 2007, ASME Applied Mechanics and Materials Conference, Jun 2007, Austin, United States Communication dans un congrès hal-00344241v1
Tube Drawing Process Modelling By A Finite Element Analysis Muriel Palengat,Olivier Guiraud,Christophe Millet,Grégory Chagnon,Denis Favier Materials & Processes for Medical Devices Conference, Sep 2007, Palm Desert, CA, United States. pp.65-72 Communication dans un congrès hal-01978976v1
Rheology of bulk moulding compounds Pierre J.J. Dumont,D. Favier,T.H. Le,L. Orgeas,C. Venet 4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy Communication dans un congrès hal-00292820v1
Experimental and Numerical Study of the Mechanical Behaviour of an Unfilled Silicone Rubber Luc Meunier,Grégory Chagnon,Denis Favier,Laurent Orgéas 5th European Conference on Constitutive Models for Rubber, ECCMR 2007, Sep 2007, Paris, France Communication dans un congrès hal-01978981v1
Tube Drawing Process Modelling By A Finite Element Analysis Muriel Palengat,Grégory Chagnon,Christophe Millet,Denis Favier 9th international conference on numerical methods in industrial forming processes, Jun 2007, Porto, Portugal Communication dans un congrès hal-01978983v1
Characterization of the fibrous microstructure of SMC during compression moulding using X-ray microtomography Pierre J.J. Dumont,D. Favier,T.H. Le,L. Orgeas,L. Salvoet al. 16th International Conference on Composite Materials (ICCM), Jul 2007, Kyoto, Japan Communication dans un congrès hal-00292828v1
A transparent compression rheometer for studying flow-induced microstructures of transparent fibre suspensions Pierre J.J. Dumont,D. Favier,L. Orgeas,J.P. Vassal 4th Annual European Rheology Conference (AERC), Apr 2007, Naples, Italy Communication dans un congrès hal-00292824v1
Caractérisation du comportement mécanique d’ élastomères silicones chargés et non chargés Luc Meunier,Grégory Chagnon,Denis Favier,Laurent Orgéas CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France Communication dans un congrès hal-01978979v1
Conductivité thermique des composites à fort contraste de phase : approche théorique et numérique Jean-Pierre Vassal,Laurent Orgéas,Steven Le Corre,Denis Favier,Jean-Louis Auriault MATERIAUX 2006: "Nano Mat - Tech : des NanoMatériaux aux NanoSystèmes.", Nov 2006, Dijon, France Communication dans un congrès hal-01008016v1
Osmotic motor : Osmotor Grégory Chagnon,Philippe Cinquin,Anne Devin,Vanessa Durrieu,Denis Favieret al. Nanobio, 2006, Grenoble, France Communication dans un congrès hal-01986567v1
Influence of thermomechanical treatment on the superelastic properties of a Ti-50.8%atNi shape memory alloy. D. Favier,Yehan Liu,L. Orgeas,Arnaud Sandel,L. Deboveet al. Euromat 2005, Sep 2005, République tchèque Communication dans un congrès hal-00507190v1
Conception d'un joint osmotique pour stents Vincent Gaudin,Philippe Cinquin,Denis Favier,Laurent Orgéas,Grégory Chagnonet al. 1ères Journées de modélisation numérique en biomécanique, 2005, Saint Etienne, France Communication dans un congrès hal-01875155v1
Transferts de chaleur par conduction dans les milieux fibreux Jean-Pierre Vassal,Laurent Orgéas,Steven Le Corre,Denis Favier,Jean-Louis Auriault 7es Journées d'Étude sur les Milieux Poreux, Oct 2005, Pessac, France Communication dans un congrès hal-01009064v1
A micro-macro analysis of the evolution of fibre orientation in highly concentrated planar fibre suspensions P. Dumont,Steven Le Corre,L. Orgeas,D. Favier AERC 2005 2nd Annual European Rheology Conference, 2005, Grenoble, France Communication dans un congrès hal-01007754v1
Influence of thermomechanical treatment processes on the superelastic properties of a Ni-rich nitinol shape memory alloy D. Favier,Yehan Liu,L. Orgeas,Arnaud Sandel,L. Deboveet al. EMMC - Mecamat, May 2003, France Communication dans un congrès hal-00507919v1
Influence of the liquid flow through the solid skeleton on the overall deformation of a material in semi-solid state Jean-Christophe Gebelin,Christian Geindreau,Laurent Orgéas,Pascale Royer,Denis Favieret al. 6th International Conference on the Semi-Solid Processing of Alloys and Composites , Sep 2000, Turin, Italy Communication dans un congrès hal-01717372v1
Overall behaviour of a truss of fibers linked by viscous joints Steven Le Corre,Denis Caillerie,Denis Favier,Laurent Orgéas Composites for the millenium (FRC2000), 2000, Newcastle-upon-Tyne, United Kingdom. pp.303 - 310, ⟨10.1533/9780857093134.303⟩ Communication dans un congrès hal-01008641v1

Poster de conférence (2)

Finite element simulation of the influence of heat treatment temperature on tension, compression and bending behavior of nanostructured NiTi wires Gérard Rio,Denis Favier,Nathanaël Connesson,Thierry Alonso The International Conference on Shape Memory and Superelastic Technologies, May 2019, Konstanz, Germany Poster de conférence hal-02314554v1
Osmotic Motor: OSMOTOR Grégory Chagnon,Philippe Cinquin,Anne Devin,Vanessa Durrieu,Denis Favieret al. Entretiens Jacques Cartier, Nanobiotechnologie pour l'analyse et la conversion d''énergie., 2006, Grenoble, France Poster de conférence hal-01986563v1

Chapitre d'ouvrage (2)

Hyperelasticity Modeling for Incompressible Passive Biological Tissues Grégory Chagnon,Jacques Ohayon,Jean-Louis Martiel,Denis Favier Biomechanics of Living Organs, Elsevier, pp.3-30, 2017, ⟨10.1016/B978-0-12-804009-6.00001-8⟩ Chapitre d'ouvrage hal-01974109v1
Validation of a Light Aspiration device for in vivo Soft TIssue Characterization (LASTIC) Vincent Luboz,Emmanuel Promayon,Grégory Chagnon,Thierry Alonso,Denis Favieret al. Yohan Payan. Soft Tissue Biomechanical Modeling for Computer Assisted Surgery, Springer-Verlag, pp.243-256, 2012, 978-3-642-29013-8. ⟨10.1007/8415_2012_123⟩ Chapitre d'ouvrage hal-00706828v1

Brevet (5)

Device for guiding a medical needle Denis Favier,Thierry Alonso,Grégory Chagnon,Yinong Liu,Alexandre Moreau-Gaudry United States, Patent n° : US 10.039.568.B2. 2018 Brevet hal-02311643v1
Stent spacer Denis Favier,Pierre Mozer,Yohan Payan,Gabriel Antherieu,Nathanaël Connesson United States, Patent n° : US 2016/0151179 A1. 2016 Brevet hal-01404159v1
Dispositif de test mécanique en flexion pure et procédé de mise en œuvre. Nathanaël Connesson,Yohan Payan,Gabriel Antherieu,Denis Favier France, Patent n° : WO 2016/001426 A1. 2016 Brevet hal-01404149v1
Dispositif de prise d'échantillon intestinal Philippe Cinquin,Denis Favier,Thierry Alonso,Aziz Bakri,Nawel Khalefet al. France, Patent n° : FR1655187. 2016 Brevet hal-02010250v1
Ecarteur de type stent Denis Favier,Pierre Mozer,Yohan Payan,Gabriel Antherieu,Nathanaël Connesson France, Patent n° : FR N°13/55935. 2013 Brevet hal-00996212v1