Access content directly

Didier Chicot

276
Documents

Publications

Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

Ayyoub Dziri , Alex Montagne , Francine Roudet , Katir Ziouche , Didier Chicot et al.
Thin Solid Films, 2023, pp.139712. ⟨10.1016/j.tsf.2023.139712⟩
Journal articles hal-03951065v1

Multi-scale mechanical characterization of the interface in 3D printed concrete

M. Taleb , D. Bulteel , D. Betrancourt , F. Roudet , S. Rémond et al.
Materials and structures, 2023, 56 (1), pp.24. ⟨10.1617/s11527-023-02114-y⟩
Journal articles hal-03962200v1

Vickers hardness of NiW coating as a potential replacement for Cr-VI: A methodology to consider size effect and tip defect in classical microindentation

Siyang Lu , Francine Roudet , A. Montagne , T. Coorevits , G. Guilbert et al.
Surface and Coatings Technology, 2022, pp.128812. ⟨10.1016/j.surfcoat.2022.128812⟩
Journal articles hal-03760562v1

Self-calibration in compliance and indenter tip defect for instrumented indentation

Didier Chicot , A. Mejias , F. Roudet , A. Montagne , D. Betrancourt et al.
Journal of Materials Research, 2022, ⟨10.1557/s43578-022-00668-1⟩
Journal articles hal-03748331v1

Fatigue Life Prediction of Steel Pipelines Based on X-ray Diffraction Analyses

Geovana Drumond , Bianca Pinheiro , Ilson Pasqualino , Francine Roudet , Didier Chicot et al.
Journal of Materials Engineering and Performance, 2022, 31 (1), pp.801-813. ⟨10.1007/s11665-021-06230-0⟩
Journal articles hal-03577544v1

Instrumented indentation based methods to assess fracture toughness (KIC) of self-compacting concrete: Influence of water to binder (w/b) ratio and type of concrete

A. Bouali , S. Grairia , D. Nettour , Y. Chrait , N. Arabi et al.
Engineering Fracture Mechanics, 2022, pp.108796. ⟨10.1016/j.engfracmech.2022.108796⟩
Journal articles hal-03788221v1

Multiscale study of cold-rolling deformation on mechanical and corrosion behaviors of AA2024-T4 aluminum alloy

Sofia Benamirouche , Abderrezak Abdi , Larbi Hemmouche , Alberto Mejias , Mohamed El Amine Belouchrani et al.
Journal of the Indian Chemical Society, 2022, 99 (1), pp.100307. ⟨10.1016/j.jics.2021.100307⟩
Journal articles hal-03577548v1

Interfacial Weakness Criterion by Indentation in 3D Printed Concrete

Maria Taleb , David Bulteel , Damien Betrancourt , Francine Roudet , Sébastien Rémond et al.
3D Printing and Additive Manufacturing, 2022, ⟨10.1089/3dp.2021.0128⟩
Journal articles hal-03739561v1

Interfacial Weakness Criterion by Indentation in 3D Printed Concrete

Maria Taleb , David Bulteel , Damien Betrancourt , Francine Roudet , Sébastien Rémond et al.
3D Printing and Additive Manufacturing, 2022, ⟨10.1089/3dp.2021.0128⟩
Journal articles hal-03659272v1

Analyzing the nanoindentation response of carbon black filled elastomers

Zahraa Bouyahia , Ahmed Mdarhri , Anass Benayad , Christian Brosseau , Ilham Elaboudi et al.
Journal of Applied Polymer Science, 2021, 138 (29), pp.50697. ⟨10.1002/app.50697⟩
Journal articles hal-03251023v1

A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements

Geovana Drumond , Francine Roudet , Didier Chicot , Bianca Pinheiro , Ilson Pasqualino et al.
Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), ⟨10.1115/1.4047203⟩
Journal articles hal-03577553v1

A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements

G. Drumond , Francine Roudet , Didier Chicot , B. Pinheiro , I. Pasqualino et al.
Journal of Offshore Mechanics and Arctic Engineering, 2021, 143 (1), ⟨10.1115/1.4047203⟩
Journal articles hal-03256541v1

The P–h2 relationship on load–displacement curve considering pile-up deformation mode in instrumented indentation

S. Habibi , Didier Chicot , A. Mejias , B. Boutabout , E. Zareb et al.
Journal of Materials Research, 2021, 36 (15), pp.3074-3085. ⟨10.1557/s43578-021-00286-3⟩
Journal articles hal-03577538v1

Multicyclic indentation on brittle glasses

M. Bentoumi , E.H. Raouache , Z. Driss , A. Montagne , A. Iost et al.
Ceramics International, 2021, 47 (18), pp.26168-26177. ⟨10.1016/j.ceramint.2021.06.024⟩
Journal articles hal-03577543v1

Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests

Said Grairia , Yacine Chrait , Alex Montagne , Alberto Mejias , Alain Lost et al.
Composite Interfaces , 2020, 27 (3), pp.307-326. ⟨10.1080/09276440.2019.1626183⟩
Journal articles hal-03577566v1

Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation

G. Ben Ghorbal , A. Tricoteaux , A. Thuault , H. Ageorges , F. Roudet et al.
Ceramics International, 2020, 46 (12), pp.19843-19851. ⟨10.1016/j.ceramint.2020.05.039⟩
Journal articles hal-03577563v1
Image document

Mechanical properties of thermally sprayed porous alumina coating by Vickers and Knoop indentation

Ghailen Ben Ghorbal , Arnaud Tricoteaux , Anthony Thuault , H. Ageorges , F. Roudet et al.
Ceramics International, 2020, 46 (12), pp.19843-19851. ⟨10.1016/j.ceramint.2020.05.039⟩
Journal articles hal-02937709v1

Quantitative evaluation of interfacial adhesion between steel reinforcements and self-compacting concretes, in steel/concrete composites, by indentation tests

S. Grairia , Y. Chrait , A. Montagne , A. Mejias , A. Lost et al.
Composite Interfaces, 2020, 27 (3), pp.307-326. ⟨10.1080/09276440.2019.1626183⟩
Journal articles hal-03256454v1

Nanoindentation Analysis of Friction Stir Welded 6061-T6 Al Alloy in As-Weld and Post Weld Heat Treatment

Firouz Fadaeifard , Mohamad Reza Pakmanesh , Morteza Shamanian Esfahani , Khamirul Amin Matori , Didier Chicot et al.
Fizika Metallov i Metallovedenie / Physics of Metals and Metallography, 2019, 120 (5), pp.483-491. ⟨10.1134/S0031918X1905003X⟩
Journal articles hal-03577578v1
Image document

Contribution of interferometry to Vickers indentation toughness determination of glass and ceramic glass

Mohamed Bentoumi , Ahmed Mdarhri , Habib Benzaama , Alain Iost , Didier Chicot et al.
Optical Engineering, 2019, 58 (3), pp.034102. ⟨10.1117/1.OE.58.3.034102⟩
Journal articles hal-02554750v1

Virtual machine concept applied to uncertainties estimation in instrumented indentation testing

Thierry Coorevits , Stephania Kossman , Didier Chicot , François Hennebelle , Alex Montagne et al.
Journal of Materials Research, 2019, 34 (14), pp.2501-2516. ⟨10.1557/jmr.2019.203⟩
Journal articles hal-03577570v1

Structure and microstructure study of Charonia lampas lampas shell

Khaled Boufala , Salim Ouhenia , Ghislain Louis , Damien Betrancourt , Didier Chicot et al.
Acta Crystallographica Section A : Foundations and Advances [2014-..], 2019, 75 (a2), pp.e200-e200. ⟨10.1107/S2053273319093562⟩
Journal articles hal-03580179v1

Microstructure analysis and mechanical properties by instrumented indentation of Charonia Lampas Lampas shell

K. Boufala , S. Ouhenia , G. Louis , D. Betrancourt , Didier Chicot et al.
Journal of the mechanical behavior of biomedical materials, 2019, 89, pp.114-121. ⟨10.1016/j.jmbbm.2018.09.018⟩
Journal articles hal-03577585v1

Instrumented indentation study of slag in view of a better valorization

D. Betrancourt , Didier Chicot , S. Kossman , G. Louis , F. Roudet et al.
Construction and Building Materials, 2019, 199, pp.349-358. ⟨10.1016/j.conbuildmat.2018.12.002⟩
Journal articles hal-03577581v1

Characterization of brazed joints by electrical resistance spot brazing with Ni-based amorphous self-flux alloys

Mircea Vodă , Cosmin Codrean , Didier Chicot , Viorel-Aurel Şerban , Dragoş Uţu et al.
Journal of Manufacturing Processes, 2019, 37, pp.617-627. ⟨10.1016/j.jmapro.2018.10.029⟩
Journal articles hal-03577582v1

Mechanical characterization by multiscale instrumented indentation of highly heterogeneous materials for braking applications

Stephania Kossman , Alain Iost , Didier Chicot , David Mercier , Itziar Serrano-Muñoz et al.
Journal of Materials Science, 2019, 54 (6), pp.4647-4670. ⟨10.1007/s10853-018-3158-7⟩
Journal articles hal-03577579v1

Effect of impregnation solutions on the synthesis of Ni-Cu/Al 2 O 3 catalyst to obtain carbon nanofibers

Jonathan Almirón , Hermann Alcazar , Rossibel Churata , Francine Roudet , Katir Ziouche et al.
Materials Research Express, 2018, 5 (12), pp.125010. ⟨10.1088/2053-1591/aadeb2⟩
Journal articles hal-03577588v1
Image document

Effet de l’addition de TiB2 sur les propriétés mécaniques et tribologiques de revêtements NiCrBSi déposés par projection thermique

Norbert Kazamer , Stephania Kossman , István Baranyi , Didier Chicot , Viorel-Aurel Serban et al.
Matériaux & Techniques, 2018, 106 (2), pp.202. ⟨10.1051/mattech/2018026⟩
Journal articles hal-02554760v1

Interfacial Indentation Test for the Study of Reinforcement bar/concrete matrix Adhesion i n High Performance Self Compacting Concretes

S. Graira , Y. Chrait , A. Montagne , Didier Chicot , A. Lost et al.
Journal of Materials and Environmental Science , 2018, 9 (1), pp.189-200. ⟨10.26872/jmes.2018.9.1.22⟩
Journal articles hal-03577591v1

Hardness evaluation from a bilayer coating system of Ni-P deposited on carbon steel plates by multicycle indentation tests

A. Mejias , Didier Chicot , A. Pertuz , A. Iost , A. Montagne et al.
Surface and Coatings Technology, 2018, 334, pp.410-419. ⟨10.1016/j.surfcoat.2017.11.011⟩
Journal articles hal-03577593v1

Multiscale and multicycle instrumented indentation to determine mechanical properties: Application to the BK7 crown borosilicate

M. Bentoumi , D. Bouzid , H. Benzaama , A. Mejias , S. Kossman et al.
Journal of Materials Research, 2017, 32 (8), pp.1444-1455. ⟨10.1557/jmr.2016.523⟩
Journal articles hal-03577608v1
Image document

Indentation instrumentée multi-échelles appliquée à l’étude des matériaux massifs métalliques

Stephania Kossman , Didier Chicot , Alain Iost
Matériaux & Techniques, 2017, 105 (1), pp.104. ⟨10.1051/mattech/2017007⟩
Journal articles hal-02917809v1

Indentation : fondamentaux et développements

Alex Montagne , Didier Chicot , Alain Iost , Eric Le Bourhis
Matériaux & Techniques, 2017, 105 (1), pp.101. ⟨10.1051/mattech/2017004⟩
Journal articles hal-02554771v1
Image document

Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application

Djahida Sidane , Hafit Khireddine , Fatima Bir , Sabeha Yala , Alex Montagne et al.
Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. ⟨10.1007/s11661-017-4108-8⟩
Journal articles hal-01565674v1

Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings

D. Sidane , H. Rammal , A. Beljebbar , S.C. Gangloff , Didier Chicot et al.
Materials Science and Engineering: C, 2017, 72, pp.650-658. ⟨10.1016/j.msec.2016.11.129⟩
Journal articles hal-03577609v1

Characterization of 100Cr6 lattice structures produced by robocasting

M. Yetna N'Jock , E. Camposilvan , L. Gremillard , E. Maire , D. Fabrègue et al.
Materials & Design, 2017, 121, pp.345-354. ⟨10.1016/j.matdes.2017.02.066⟩
Journal articles hal-03577604v1

Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application

Djahida Sidane , Hafit Khireddine , Fatima Bir , Sabeha Yala , Alex Montagne et al.
Metallurgical and Materials Transactions A, 2017, 48 (7), pp.3570-3582. ⟨10.1007/s11661-017-4108-8⟩
Journal articles hal-03577597v1

A new approach of the Oliver and Pharr model to fit the unloading curve from instrumented indentation testing

Stephania Kossman , Thierry Coorevits , Alain Iost , Didier Chicot
Journal of Materials Research, 2017, 32 (12), pp.2230-2240. ⟨10.1557/jmr.2017.120⟩
Journal articles hal-03577598v1

Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings

Djahida Sidane , H. Rammal , A. Beljebbar , Sophie C. Gangloff , Didier Chicot et al.
Materials Science and Engineering: C, 2017, 72, pp.650-658. ⟨10.1016/j.msec.2016.11.129⟩
Journal articles hal-01433854v1

Comparison of conventional Knoop and Vickers hardness of ceramic materials

Ghailen Ben Ghorbal , Arnaud Tricoteaux , Anthony Thuault , Ghislain Louis , Didier Chicot et al.
Journal of the European Ceramic Society, 2017, 37 (6), pp.2531-2535. ⟨10.1016/j.jeurceramsoc.2017.02.014⟩
Journal articles hal-03577601v1
Image document

Fluage et relaxation par indentation d’aciers au chrome

P. Nogning Kamta , Didier Chicot , F. Roudet , M. Touzin , G. Louis et al.
Matériaux & Techniques, 2017, 105 (1), pp.103. ⟨10.1051/mattech/2017027⟩
Journal articles hal-02554770v1

Mechanical characterization of brittle materials using instrumented indentation with Knoop indenter

Ghailen Ben Ghorbal , Arnaud Tricoteaux , Anthony Thuault , Ghislain Louis , Didier Chicot et al.
Mechanics of Materials, 2017, 108, pp.58-67. ⟨10.1016/j.mechmat.2017.03.009⟩
Journal articles hal-03577606v1

Indentation creep analysis of T22 and T91 chromium based steels

Philemon Nogning Kamta , Alberto Mejias , Francine Roudet , Ghislain Louis , M. Touzin et al.
Materials Science and Engineering: A, 2016, 652, pp.315-324. ⟨10.1016/j.msea.2015.11.098⟩
Journal articles hal-01246127v1

Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films

Y. Benarioua , F. Roudet , Didier Chicot
Materials Science and Engineering: A, 2016, 662, pp.268-274. ⟨10.1016/j.msea.2016.03.067⟩
Journal articles hal-03577617v1

Work-of-indentation coupled to contact stiffness for calculating elastic modulus by instrumented indentation

M. Yetna N'Jock , F. Roudet , M. Idriss , O. Bartier , Didier Chicot et al.
Mechanics of Materials, 2016, 94, pp.170-179. ⟨10.1016/j.mechmat.2015.12.003⟩
Journal articles hal-03577620v1

Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect

Alberto Mejias , Rolando T. Candidato Jr , Lech Pawlowski , Didier Chicot
Surface and Coatings Technology, 2016, 298, pp.93-102. ⟨10.1016/j.surfcoat.2016.04.028⟩
Journal articles hal-01318814v1

Hardness-load modelling applied to multilayer galvanised coatings

Y. Benarioua , A. Mejias , F. Roudet , A. Iost , Didier Chicot et al.
Surface Engineering, 2016, 32 (3), pp.194-200. ⟨10.1080/02670844.2015.1116802⟩
Journal articles hal-03577635v1

Influence of the indenter tip defect in classical indentation: Application to the hardness determination of DLC thin films

Younes Benarioua , Francine Roudet , Didier Chicot
Materials Science and Engineering: A, 2016, 662, pp.268-274. ⟨10.1016/j.msea.2016.03.067⟩
Journal articles hal-01303472v1

Nature of Steel Effect on Intermetallic Compounds Obtained by Galvanization

Younès Benarioua , Didier Chicot
International journal of thermal and environmental engineering, 2016, 11 (1), ⟨10.5383/ijtee.11.01.007⟩
Journal articles hal-03580040v1

Mechanical properties by instrumented indentation of solution precursor plasma sprayed hydroxyapatite coatings: Analysis of microstructural effect

Alberto Mejias , Rolando Candidato , Lech Pawłowski , Didier Chicot
Surface and Coatings Technology, 2016, 298, pp.93-102. ⟨10.1016/j.surfcoat.2016.04.028⟩
Journal articles hal-03577614v1

Indentation creep analysis of T22 and T91 chromium based steels

P. Nogning Kamta , A. Mejias , F. Roudet , G. Louis , M. Touzin et al.
Materials Science and Engineering: A, 2016, 652, pp.315-324. ⟨10.1016/j.msea.2015.11.098⟩
Journal articles hal-03577623v1

Some improvements for determining the hardness of homogeneous materials from the work-of-indentation

Didier Chicot , Michel Yetna N'Jock , Francine Roudet , Xavier Decoopman , Mariana H. Staia et al.
International Journal of Mechanical Sciences, 2016, 105, pp.279-290. ⟨10.1016/j.ijmecsci.2015.11.030⟩
Journal articles hal-01249912v1

Hardness-load modelling applied to multilayer galvanised coatings

Younes Benarioua , Alberto Mejias , Francine Roudet , Alain Iost , Didier Chicot et al.
Surface Engineering, 2016, 32 (3), pp.194-200. ⟨10.1080/02670844.2015.1116802⟩
Journal articles hal-01291835v1

Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method

Djahida Sidane , Hafit Khireddine , Sabeha Yala , Salima Ziani , Fatima Bir et al.
Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. ⟨10.1007/s11663-015-0397-8⟩
Journal articles hal-01206292v1

Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film

Djahida Sidane , Didier Chicot , Sabeha Yala , Salima Ziani , Hafit Khireddine et al.
Thin Solid Films, 2015, 593, pp.71-80. ⟨10.1016/j.tsf.2015.09.037⟩
Journal articles hal-03577652v1

A multilayer coating with optimized properties for corrosion protection of Al

Farid Khelifa , Sergey Ershov , Marie-Eve Druart , Youssef Habibi , Didier Chicot et al.
Journal of Materials Chemistry A, 2015, 3, pp.15977-15985. ⟨10.1039/C5TA01920F⟩
Journal articles hal-01206270v1

Mechanical properties by indentation of aluminium nitride nanometric thin film

Francine Roudet , Didier Chicot , Xavier Decoopman , Alain Iost , Juan Bürgi et al.
Matériaux & Techniques, 2015, 103 (6), pp.605. ⟨10.1051/mattech/2015054⟩
Journal articles hal-01264296v1

Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film

Djahida Sidane , Didier Chicot , Sabeha Yala , Salima Ziani , Hafit Khireddine et al.
Thin Solid Films, 2015, 593, pp.71-80. ⟨10.1016/j.tsf.2015.09.037⟩
Journal articles hal-01211765v1

A criterion to identify sinking-in and piling-up in indentation of materials

Michel Yetna N'Jock , M. Yetna N’jock , D. Chicot , J.M. Ndjaka , J. Lesage et al.
International Journal of Mechanical Sciences, 2015, 90, pp.145-150. ⟨10.1016/j.ijmecsci.2014.11.008⟩
Journal articles hal-03255744v1

A criterion to identify sinking-in and piling-up in indentation of materials

M. Yetna N’jock , Didier Chicot , J.M. Ndjaka , J. Lesage , X. Decoopman et al.
International Journal of Mechanical Sciences, 2015, 90, pp.145-150. ⟨10.1016/j.ijmecsci.2014.11.008⟩
Journal articles hal-03577655v1

Constitutive description of Fe–Mn23–C0.6 steel deformed under hot-working conditions

Eli Saúl Puchi-Cabrera , Jean-Dominique Guerin , Mirentxu Dubar , M.H. Staia , Jacky Lesage et al.
International Journal of Mechanical Sciences, 2015, 99, pp.143-153. ⟨10.1016/j.ijmecsci.2015.04.021⟩
Journal articles hal-03577646v1

Hardness of thermal sprayed coatings: Relevance of the scale of measurement

Didier Chicot , H. Ageorges , M. Voda , G. Louis , M.A. Ben Dhia et al.
Surface and Coatings Technology, 2015, 268, pp.173-179. ⟨10.1016/j.surfcoat.2014.04.043⟩
Journal articles hal-03577653v1

Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method

Djahida Sidane , Hafit Khireddine , Sabeha Yala , Salima Ziani , Fatima Bir et al.
Metallurgical and Materials Transactions B, 2015, 46 (5), pp.2340-2347. ⟨10.1007/s11663-015-0397-8⟩
Journal articles hal-03577640v1

Un critere simple d’identification du mode de déformation par indentation

Michel Yetna N'Jock , Didier Chicot , Jean-Marie B. Ndjaka , Jacky Lesage , Xavier Decoopman et al.
Matériaux & Techniques, 2015, 103 (6), pp.603. ⟨10.1051/mattech/2015048⟩
Journal articles hal-01251610v1

Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy

C. Fares , L. Hemmouche , M.A. Belouchrani , A. Amrouche , Didier Chicot et al.
Materials & Design, 2015, 86, pp.723-734. ⟨10.1016/j.matdes.2015.07.120⟩
Journal articles hal-03577638v1

Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements

Francine Roudet , Didier Chicot , Xavier Decoopman , Alain Iost , Juan Bürgi et al.
Thin Solid Films, 2015, 594 (Part A), pp.129-137. ⟨10.1016/j.tsf.2015.10.010⟩
Journal articles hal-01264321v1

Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy

Chahinez Fares , L. Hemmouche , M.A. Belouchrani , Abdelwaheb Amrouche , Didier Chicot et al.
Materials & Design, 2015, 86, pp.723-734. ⟨10.1016/j.matdes.2015.07.120⟩
Journal articles hal-01206172v1

Un critere simple d’identification du mode de déformation par indentation

Michel Yetna N'Jock , Michel Yetna N’jock , Didier Chicot , Jean Marie Ndjaka , Jacky Lesage et al.
Matériaux & Techniques, 2015, 103 (6), pp.603. ⟨10.1051/mattech/2015048⟩
Journal articles hal-03255793v1

A multilayer coating with optimized properties for corrosion protection of Al

Farid Khelifa , Sergey Ershov , Marie-Eve Druart , Youssef Habibi , Didier Chicot et al.
Journal of Materials Chemistry A, 2015, 3 (31), pp.15977-15985. ⟨10.1039/C5TA01920F⟩
Journal articles hal-03577643v1

A criterion to identify sinking-in and piling-up in indentation of materials

Michel Yetna N'Jock , Didier Chicot , J.M Ndjaka , Jacky Lesage , Xavier Decoopman et al.
International Journal of Mechanical Sciences, 2015, 90, pp.145-150. ⟨10.1016/j.ijmecsci.2014.11.008⟩
Journal articles hal-01093128v1

Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements

F. Roudet , Didier Chicot , X. Decoopman , A. Iost , J. Bürgi et al.
Thin Solid Films, 2015, 594, pp.129-137. ⟨10.1016/j.tsf.2015.10.010⟩
Journal articles hal-03577650v1

Correlation between yield stress and hardness of nickel–silicon–boron-based alloys by nanoindentation

Viorel-Aurel Şerban , Cosmin Codrean , Mircea Vodă , Didier Chicot , Xavier Decoopman et al.
Materials Science and Engineering: A, 2014, 605, pp.294-300. ⟨10.1016/j.msea.2014.03.056⟩
Journal articles hal-03577659v1

Mechanical properties of WC coatings evaluated using instrumented indentation technique

J. La Barbera-Sosa , Y. Santana , J. Caro , Didier Chicot , J. Lesage et al.
Surface Engineering, 2014, 30 (7), pp.498-510. ⟨10.1179/1743294414Y.0000000261⟩
Journal articles hal-03577673v1

Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena

Krystian Jankowski , Artur Wymyslowski , Didier Chicot
Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. ⟨10.1108/SSMT-10-2013-0029⟩
Journal articles hal-03577666v1
Image document

Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating

S. Kossman , D. Chicot , Xavier Decoopman , Alain Iost , Adrien van Gorp et al.
Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. ⟨10.1007/s11666-014-0146-6⟩
Journal articles hal-01170447v1

Constitutive description for the design of hot-working operations of a 20MnCr5 steel grade

Eli Saúl Puchi-Cabrera , Jean-Dominique Guerin , Mirentxu Dubar , Mariana H. Staia , Jacky Lesage et al.
Materials & Design, 2014, 62, pp.255-264. ⟨10.1016/j.matdes.2014.05.011⟩
Journal articles hal-01009580v1

Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentation

Viorel-Aurel Servan , Cosmin Codrean , Mircea Voda , Didier Chicot , Xavier Decoopman et al.
Materials Science and Engineering: A, 2014, 605, pp.294-300. ⟨10.1016/j.msea.2014.03.056⟩
Journal articles hal-00978386v1

An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization

Eli Saúl Puchi-Cabrera , M.H. Staia , Jean-Dominique Guerin , Jacky Lesage , Mirentxu Dubar et al.
International Journal of Plasticity, 2014, 54, pp.113-131. ⟨10.1016/j.ijplas.2013.08.011⟩
Journal articles hal-00937039v1

A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film

D. Chicot , Michel Yetna N'Jock , Eli Saúl Puchi-Cabrera , A. Iost , M.H. Staia et al.
Thin Solid Films, 2014, 558, pp.259-266. ⟨10.1016/j.tsf.2014.02.044⟩
Journal articles hal-03255748v1

A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film

Didier Chicot , Michel Yetna N'Jock , Eli Saúl Puchi-Cabrera , Alain Iost , M.H. Staia et al.
Thin Solid Films, 2014, 558, pp.259-266. ⟨10.1016/j.tsf.2014.02.044⟩
Journal articles hal-00978376v1

A contact area function for Berkovich nanoindentation: Application to hardness determination of a TiHfCN thin film

Didier Chicot , M. Yetna N'Jock , Eli Saúl Puchi-Cabrera , A. Iost , M.H. Staia et al.
Thin Solid Films, 2014, 558, pp.259-266. ⟨10.1016/j.tsf.2014.02.044⟩
Journal articles hal-03577660v1

Propriétés mécaniques des couches minces par nanoindentation

Didier Chicot , Ghislain Louis
Traitements et Matériaux, 2014, 429, pp.19-23
Journal articles hal-01093297v1
Image document

A contact area function for Berkovich nanoindentation : Application to hardness determination of a TiHfCN thin film

D. Chicot , M. Yetna N'Jock , Eli Saúl Puchi-Cabrera , Alain Iost , M.H. Staia et al.
Thin Solid Films, 2014, 558, pp.259-266
Journal articles hal-01066329v1

Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating

S. Kossman , Didier Chicot , X. Decoopman , A. Iost , A. van Gorp et al.
Journal of Thermal Spray Technology, 2014, 23 (8), pp.1350-1361. ⟨10.1007/s11666-014-0146-6⟩
Journal articles hal-03577672v1

Mechanical properties of WC coatings evaluated using instrumented indentation technique

J.G. La Barbera-Sosa , Y.Y. Santana , J. Caro , Didier Chicot , Jacky Lesage et al.
Surface Engineering, 2014, 30 (7), pp.498-510. ⟨10.1179/1743294414Y.0000000261⟩
Journal articles hal-01009598v1

Combined loading and failure analysis of lead-free solder joints due to creep and fatigue phenomena

K. Jankowski , A. Wymyslowski , Didier Chicot
Soldering and Surface Mount Technology, 2014, 26 (1), pp.22-26. ⟨10.1108/SSMT-10-2013-0029⟩
Journal articles hal-00945968v1

Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale

Annalisa Bandini , Paolo Berry , Edoardo Bemporad , Marco Sebastiani , Didier Chicot et al.
International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. ⟨10.1016/j.ijrmms.2014.07.015⟩
Journal articles hal-01068503v1

Role of grain boundaries and micro-defects on the mechanical response of a crystalline rock at multiscale

Annalisa Bandini , Paolo Berry , Edoardo Bemporad , Marco Sebastiani , Didier Chicot et al.
International Journal of Rock Mechanics and Mining Sciences, 2014, 71, pp.429-441. ⟨10.1016/j.ijrmms.2014.07.015⟩
Journal articles hal-03577670v1

Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

Leszek Latka , Andrea Cattini , Didier Chicot , Lech Pawlowski , Stefan Kozerski et al.
Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. ⟨10.1007/s11666-012-9874-7⟩
Journal articles hal-00797381v1
Image document

Analysis of indentation size effect in copper and its alloys

D. Chicot , Eli Saúl Puchi-Cabrera , Alain Iost , M.H. Staia , X. Decoopman et al.
Materials Science and Technology, 2013, 29 (7), pp.868-876
Journal articles hal-01070182v1
Image document

Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying

J.G. La Barbera-Sosa , Y.Y. Santana , C. Villalobos-Gutierrez , D. Chicot , J. Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.248-256. ⟨10.1016/j.surfcoat.2012.05.098⟩
Journal articles hal-01174230v1

Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel

P.P. Bandyopadhyay , Didier Chicot , C.S. Kumar , X. Decoopman , J. Lesage et al.
Materials Science and Engineering: A, 2013, 576, pp.126-133. ⟨10.1016/j.msea.2013.03.081⟩
Journal articles hal-03577684v1

Models for hardness and adhesion of coatings

J. Lesage , Didier Chicot
Surface Engineering, 2013, 15 (6), pp.447-453. ⟨10.1179/026708499101516821⟩
Journal articles hal-03577819v1

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

Michel Yetna N'Jock , M. Yetna N’jock , D. Chicot , X. Decoopman , J. Lesage et al.
International Journal of Mechanical Sciences, 2013, 75, pp.257-264. ⟨10.1016/j.ijmecsci.2013.07.008⟩
Journal articles hal-03255753v1

Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile

X. Decoopman , L. Nosei , J. Lesage , Didier Chicot , J. Feugeas et al.
International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155. ⟨10.1504/IJMMP.2013.055381⟩
Journal articles hal-03577682v1

Influence of tip defect and indenter shape on the mechanical properties determination by indentation of a TiB2–60%B4C ceramic composite

Didier Chicot , P. de Baets , M.H. Staia , Eli Saúl Puchi-Cabrera , G. Louis et al.
International Journal of Refractory Metals and Hard Materials, 2013, 38, pp.102-110. ⟨10.1016/j.ijrmhm.2013.01.006⟩
Journal articles hal-03577724v1

An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques

L. Hemmouche , Didier Chicot , Abdelwaheb Amrouche , Alain Iost , M.A. Belouchrani et al.
Materials Science and Engineering: A, 2013, 585, pp.155-164. ⟨10.1016/j.msea.2013.07.054⟩
Journal articles hal-00858035v1

Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions

Eli Saúl Puchi-Cabrera , M.H. Staia , Jean-Dominique Guerin , Jacky Lesage , Mirentxu Dubar et al.
International Journal of Plasticity, 2013, 51, pp.145-160. ⟨10.1016/j.ijplas.2013.05.007⟩
Journal articles hal-00871501v1

Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings

Leszek Latka , Didier Chicot , Andrea Cattini , Lech Pawlowski , A. Ambroziak et al.
Surface and Coatings Technology, 2013, 220, pp.131-139. ⟨10.1016/j.surfcoat.2012.07.025⟩
Journal articles hal-00812487v1
Image document

Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying

José Gregorio La Barbera-Sosa , Y.Y. Santana , C. Villalobos-Gutierrez , D. Chicot , J. Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.248-256. ⟨10.1016/j.surfcoat.2012.05.098⟩
Journal articles hal-01070169v1
Image document

An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques

L. Hemmouche , D. Chicot , A. Amrouche , A. Iost , M.A. A Belouchrani et al.
Materials Science and Engineering: A, 2013, 585, pp.155-164. ⟨10.1016/j.msea.2013.07.054⟩
Journal articles hal-01065625v1

Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC-10Co-4Cr cermet by HVOF thermal spray

Eli Saúl Puchi-Cabrera , M.H. Staia , Y.Y. Santana , E.J. Mora-Zorrilla , Jacky Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.122-130. ⟨10.1016/j.surfcoat.2012.04.087⟩
Journal articles hal-00806952v1

Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF thermal spraying

J.G. La Barbera-Sosa , Y.Y. Santana , C. Villalobos-Gutierrez , Didier Chicot , Jacky Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.248-256. ⟨10.1016/j.surfcoat.2012.05.098⟩
Journal articles hal-00806941v1

Influence of tip defect and indenter shape on the mechanical properties determination by indentation of a TiB2-60%B4C ceramic composite

Didier Chicot , P. de Baets , M.H. Staia , Eli Saúl Puchi-Cabrera , G. Louis et al.
International Journal of Refractory Metals and Hard Materials, 2013, 38, pp.102-110. ⟨10.1016/j.ijrmhm.2013.01.006⟩
Journal articles hal-00816692v1

Interpretation of instrumented hardness measurements on stainless steel with different surface preparations

Didier Chicot , F. Roudet , A. Soom , J. Lesage
Surface Engineering, 2013, 23 (1), pp.32-39. ⟨10.1179/174329407X161573⟩
Journal articles hal-03577773v1

Indentation size effect of cortical bones submitted to different soft tissue removals

A. Bandini , Didier Chicot , P. Berry , X. Decoopman , A. Pertuz et al.
Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. ⟨10.1016/j.jmbbm.2013.02.011⟩
Journal articles hal-03577717v1

Effect of some thermal treatments on interface adhesion toughness of various thick thermal spray coatings

Didier Chicot , G. Marot , P. Araujo , N. Horny , A. Tricoteaux et al.
Surface Engineering, 2013, 22 (5), pp.390-398. ⟨10.1179/174329406X126690⟩
Journal articles hal-03577788v1

Residual stresses and adhesion of thermal spray coatings

P. Araujo , Didier Chicot , M. Staia , J. Lesage
Surface Engineering, 2013, 21 (1), pp.35-40. ⟨10.1179/174329405X30020⟩
Journal articles hal-03577796v1

Structure and hardness of diamond films deposited on WC-Co by CVD technique

Y. Benarioua , Jacky Lesage , Didier Chicot , Michel Moisan
Surface and Coatings Technology, 2013, 227, pp.70-74. ⟨10.1016/j.surfcoat.2013.04.005⟩
Journal articles hal-00829384v1

Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness

M. Hadad , G. Marot , P. Démarécaux , Didier Chicot , J. Lesage et al.
Surface Engineering, 2013, 23 (4), pp.279-283. ⟨10.1179/174329407X215159⟩
Journal articles hal-03577772v1

Mechanical Properties of Yttria- and Ceria-Stabilized Zirconia Coatings Obtained by Suspension Plasma Spraying

Leszek Łatka , Andrea Cattini , Didier Chicot , Lech Pawłowski , Stefan Kozerski et al.
Journal of Thermal Spray Technology, 2013, 22 (2-3), pp.125-130. ⟨10.1007/s11666-012-9874-7⟩
Journal articles hal-03577721v1

Prediction of hardness–depth profile from indentations at surface of materials

J. Lesage , Didier Chicot , L. Nosei , J. Feugeas
Surface Engineering, 2013, 25 (2), pp.93-96. ⟨10.1179/026708408X336355⟩
Journal articles hal-03577759v1

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

M. Yetna N’jock , Didier Chicot , X. Decoopman , J. Lesage , J.M. Ndjaka et al.
International Journal of Mechanical Sciences, 2013, 75, pp.257-264. ⟨10.1016/j.ijmecsci.2013.07.008⟩
Journal articles hal-03577678v1

Cr2C3–NiCr VPS thermal spray coatings as candidate for chromium replacement

M.H. Staia , M. Suárez , Didier Chicot , J. Lesage , A. Iost et al.
Surface and Coatings Technology, 2013, 220, pp.225-231. ⟨10.1016/j.surfcoat.2012.07.043⟩
Journal articles hal-03577711v1

Eddy currents to control steel decarburising

D. Mercier , Didier Chicot , X. Decoopman , J. Lesage
Surface Engineering, 2013, 23 (4), pp.273-278. ⟨10.1179/174329407X215140⟩
Journal articles hal-03577771v1

Sliding wear of a-C:H coatings against alumina in corrosive media

M.H. Staia , Eli Saúl Puchi-Cabrera , A. Iost , E. Carrasquero , Y.Y. Santana Mendez et al.
Diamond and Related Materials, 2013, 38, pp.139-147. ⟨10.1016/j.diamond.2013.06.020⟩
Journal articles hal-03577681v1

Analysis of indentation size effect in copper and its alloys

Didier Chicot , Eli Saúl Puchi-Cabrera , A Iost , M Staia , X Decoopman et al.
Materials Science and Technology, 2013, 29 (7), pp.868-876. ⟨10.1179/1743284713Y.0000000213⟩
Journal articles hal-03577691v1

Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray

Eli Saúl Puchi-Cabrera , M.H. Staia , Y.Y. Santana , E.J. Mora-Zorrilla , J. Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.122-130. ⟨10.1016/j.surfcoat.2012.04.087⟩
Journal articles hal-03577710v1

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

Michel Yetna N'Jock , Didier Chicot , Xavier Decoopman , Jacky Lesage , J.M Ndjaka et al.
International Journal of Mechanical Sciences, 2013, 75, pp.257-264. ⟨10.1016/j.ijmecsci.2013.07.008⟩
Journal articles hal-00857528v1

Influence of sinking-in and piling-up on the mechanical properties determination by indentation: A case study on rolled and DMLS stainless steel

P.P. Bandyopadhyay , Didier Chicot , C.S. Kumar , Xavier Decoopman , Jacky Lesage et al.
Materials Science and Engineering: A, 2013, 576, pp.126-133. ⟨10.1016/j.msea.2013.03.081⟩
Journal articles hal-00823488v1

Role of plastic deformation on the efficiency of a nitriding treatment: modelling of the hardness-depth profile

Xavier Decoopman , L. Nosei , Jacky Lesage , Didier Chicot , Jorge Feugeas et al.
International Journal of Microstructure and Materials Properties, 2013, 8 (3), pp.155-170
Journal articles hal-00945890v1

Indentation size effect of cortical bones submitted to different soft tissue removals

A. Bandini , Didier Chicot , P. Berry , Xavier Decoopman , A. Pertuz et al.
Journal of the mechanical behavior of biomedical materials, 2013, 20, pp.338-346. ⟨10.1016/j.jmbbm.2013.02.011⟩
Journal articles hal-00816689v1

Analysis of indentation size effect in copper and its alloys

Didier Chicot , Eli Saúl Puchi-Cabrera , Alain Iost , M.H. Staia , Xavier Decoopman et al.
Journal of Materials Science and Technology, 2013, 29 (7), pp.868-876. ⟨10.1179/1743284713Y.0000000213⟩
Journal articles hal-00832604v1
Image document

Increase of the load carrying capacity of aluminium 2024-T3 by means of a NiP-CRC-DLC coating

Mariana Staia , Eli Saúl Puchi-Cabrera , Y.Y. Santana , J.G. La Barbera-Sosa , Alain Iost et al.
International Journal Sustainable Construction & Design, 2013, 4 (2), pp.16-23
Journal articles hal-01319243v1

Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique

Didier Chicot , K. Tilkin , K. Jankowski , A. Wymyslowski
Microelectronics Reliability, 2013, 53 (5), pp.761-766. ⟨10.1016/j.microrel.2013.01.008⟩
Journal articles hal-00816697v1

Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement

M.H. Staia , M. Suarez , Didier Chicot , Jacky Lesage , Alain Iost et al.
Surface and Coatings Technology, 2013, 220, pp.225-231. ⟨10.1016/j.surfcoat.2012.07.043⟩
Journal articles hal-00812498v1

Mechanical Properties of Porosity-Free Beta Tricalcium Phosphate (<i>β</i>-TCP) Ceramic by Sharp and Spherical Indentations

Didier Chicot , A. Tricoteaux , J. Lesage , A. Leriche , M. Descamps et al.
New Journal of Glass and Ceramics, 2013, 03 (01), pp.16-28. ⟨10.4236/njgc.2013.31004⟩
Journal articles hal-03586273v1

An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques

L. Hemmouche , Didier Chicot , A. Amrouche , A. Iost , M.A. Belouchrani et al.
Materials Science and Engineering: A, 2013, 585, pp.155-164. ⟨10.1016/j.msea.2013.07.054⟩
Journal articles hal-03577677v1

Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying

J.G. La Barbera-Sosa , Y.Y. Santana , C. Villalobos-Gutiérrez , Didier Chicot , J. Lesage et al.
Surface and Coatings Technology, 2013, 220, pp.248-256. ⟨10.1016/j.surfcoat.2012.05.098⟩
Journal articles hal-03577708v1

Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings

L. Łatka , Didier Chicot , A. Cattini , L. Pawłowski , A. Ambroziak et al.
Surface and Coatings Technology, 2013, 220, pp.131-139. ⟨10.1016/j.surfcoat.2012.07.025⟩
Journal articles hal-03577715v1

Influence of mechanical properties of tungsten carbide–cobalt thermal spray coatings on their solid particle erosion behaviour

Y Santana , J La Barbera-Sosa , A Bencomo , J Lesage , Didier Chicot et al.
Surface Engineering, 2013, 28 (4), pp.237-243. ⟨10.1179/1743294411Y.0000000016⟩
Journal articles hal-03577730v1

Sliding wear of a-C:H coatings against alumina in corrosive media

M.H. Staia , Eli Saúl Puchi-Cabrera , Alain Iost , E.J. Carrasquero , Y.Y. Santana-Mendez et al.
Diamond and Related Materials, 2013, 38, pp.139-147. ⟨10.1016/j.diamond.2013.06.020⟩
Journal articles hal-00945903v1
Image document

Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement

M.H. Staia , Maribel Suarez , D. Chicot , J. Lesage , Alain Iost et al.
Surface and Coatings Technology, 2013, 220, pp.225-231
Journal articles hal-01070192v1

Reliability analysis of solder joints due to creep and fatigue in microelectronic packaging using microindentation technique

Didier Chicot , K. Tilkin , K. Jankowski , A. Wymysłowski
Microelectronics Reliability, 2013, 53 (5), pp.761-766. ⟨10.1016/j.microrel.2013.01.008⟩
Journal articles hal-03577706v1

New developments for fracture toughness determination by Vickers indentation

Didier Chicot , A. Pertuz , F. Roudet , M.H. Staia , J. Lesage et al.
Materials Science and Technology, 2013, 20 (7), pp.877-884. ⟨10.1179/026708304225017427⟩
Journal articles hal-03577798v1

Structure and hardness of diamond films deposited on WC–Co by CVD technique

Younes Benarioua , Jacky Lesage , Didier Chicot , Michel Moisan
Surface and Coatings Technology, 2013, 227, pp.70-74. ⟨10.1016/j.surfcoat.2013.04.005⟩
Journal articles hal-03577686v1

Annealing study of thin chromium layers on cemented steel substrates

Younes Benarioua , Rabeh Boubaaya , Jacky Lesage , Didier Chicot
Surface and Coatings Technology, 2013, 227, pp.65-69. ⟨10.1016/j.surfcoat.2013.04.006⟩
Journal articles hal-03577688v1

Elastic modulus of TiHfCN thin films by instrumented indentation

Didier Chicot , Eli Saúl Puchi-Cabrera , R. Aumaitre , G. Bouscarrat , C. Dublanche-Tixier et al.
Thin Solid Films, 2012, 522, pp.304-313. ⟨10.1016/j.tsf.2012.08.022⟩
Journal articles hal-03577726v1

Elastic modulus of TiHfCN thin films by instrumented indentation

Didier Chicot , Eli Saúl Puchi-Cabrera , R. Aumaitre , G. Bouscarrat , Christelle Dublanche-Tixier et al.
Thin Solid Films, 2012, 522, pp.304-313. ⟨10.1016/j.tsf.2012.08.022⟩
Journal articles hal-00753847v1

Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings

P.P. Bandyopadhyay , Didier Chicot , B. Venkateshwarlu , V. Racherla , Xavier Decoopman et al.
Mechanics of Materials, 2012, 53, pp.61-71. ⟨10.1016/j.mechmat.2012.05.006⟩
Journal articles hal-00714113v1

Mechanical properties of yttria and ceria stabilized zirconia coatings obtained by suspension plasma spraying

L. Latka , Lech Pawlowski , Andrea Cattini , Alain Denoirjean , D. Chicot et al.
Thermal Spray 2012: Proceedings of the International Spray Conference and Exposition (ITSC 2012), 2012, pp.805-809
Journal articles hal-00944026v1

Mechanical properties of conventional and nanostructured plasma sprayed alumina coatings

P.P. Bandyopadhyay , Didier Chicot , B. Venkateshwarlu , V. Racherla , X. Decoopman et al.
Mechanics of Materials, 2012, 53, pp.61-71. ⟨10.1016/j.mechmat.2012.05.006⟩
Journal articles hal-03577727v1

Influence of mechanical properties of tungsten carbide‐cobalt thermal spray coatings on their solid particle erosion behaviour

Y.Y. Santana , J.G. La Barbera-Sosa , A. Bencomo , Jacky Lesage , Didier Chicot et al.
Surface Engineering, 2012, 28 (4), pp.237-243. ⟨10.1179/1743294411Y.0000000016⟩
Journal articles hal-00714128v1

Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique

R. Vert , Didier Chicot , X. Decoopman , I.C. Gruescu , E. Meillot et al.
Thin Solid Films, 2011, 519 (22), pp.7789-7795. ⟨10.1016/j.tsf.2011.04.228⟩
Journal articles hal-03577734v1

Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique

R. Vert , Didier Chicot , Xavier Decoopman , Ion-Cosmin Gruescu , E. Meillot et al.
Thin Solid Films, 2011, 519 (22), pp.7789-7795. ⟨10.1016/j.tsf.2011.04.228⟩
Journal articles hal-00617858v1

Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO*OH) by instrumented indentation and molecular dynamics analysis

Didier Chicot , Johnny Mendoza , Ali Zaoui , G. Louis , V. Lepingle et al.
Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. ⟨10.1016/j.matchemphys.2011.05.056⟩
Journal articles hal-00611044v1

Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation

R.R. Ambriz , Didier Chicot , Noureddine Benseddiq , Gérard Mesmacque , S.D. de La Torre et al.
European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. ⟨10.1016/j.euromechsol.2010.12.007⟩
Journal articles hal-00579951v1

Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling

Didier Chicot , Eli Saúl Puchi-Cabrera , X. Decoopman , F. Roudet , J. Lesage et al.
Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. ⟨10.1016/j.diamond.2011.10.004⟩
Journal articles hal-03577731v1

Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO·OH) by instrumented indentation and molecular dynamics analysis

Didier Chicot , J. Mendoza , A. Zaoui , G. Louis , V. Lepingle et al.
Materials Chemistry and Physics, 2011, 129 (3), pp.862-870. ⟨10.1016/j.matchemphys.2011.05.056⟩
Journal articles hal-03577732v1

Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modeling

Didier Chicot , Eli Saúl Puchi-Cabrera , Xavier Decoopman , Francine Roudet , Jacky Lesage et al.
Diamond and Related Materials, 2011, 20 (10), pp.1344-1352. ⟨10.1016/j.diamond.2011.10.004⟩
Journal articles hal-00636698v1

Mechanical properties of an Al91-Mn6-Nd3 nanostructured alloy

Didier Chicot , M. Voda , Xavier Decoopman , V.A. Serban , Eli Saúl Puchi-Cabrera et al.
Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. ⟨10.1016/j.msea.2011.06.003⟩
Journal articles hal-00607925v1

Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation

A. Tricoteaux , E. Rguiti , Didier Chicot , L. Boilet , M. Descamps et al.
Journal of the European Ceramic Society, 2011, 31 (8), pp.1361-1369. ⟨10.1016/j.jeurceramsoc.2011.02.005⟩
Journal articles hal-03577737v1

Local mechanical properties of the 6061-T6 aluminium weld using micro-traction and instrumented indentation

R.R. Ambriz , Didier Chicot , N. Benseddiq , G. Mesmacque , S.D. de La Torre et al.
European Journal of Mechanics - A/Solids, 2011, 30 (3), pp.307-315. ⟨10.1016/j.euromechsol.2010.12.007⟩
Journal articles hal-03577738v1

Mechanical properties of an Al91–Mn6–Nd3 nanostructured alloy

Didier Chicot , M. Voda , X. Decoopman , V.A. Serban , Eli Saúl Puchi-Cabrera et al.
Materials Science and Engineering: A, 2011, 528 (22-23), pp.7041-7051. ⟨10.1016/j.msea.2011.06.003⟩
Journal articles hal-03577735v1

Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates

Romain Vert , Didier Chicot , Christelle Dublanche-Tixier , E. Meillot , Armelle Vardelle et al.
Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. ⟨10.1016/j.surfcoat.2010.07.090⟩
Journal articles hal-00527707v1

Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray

W. Gonzalez , Didier Chicot , Jacky Lesage , J.G. La Barbera-Sosa , Ion-Cosmin Gruescu et al.
Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. ⟨10.1016/j.msea.2010.07.014⟩
Journal articles hal-00515398v1

Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid

Leszek Łatka , Lech Pawlowski , Didier Chicot , Christel Pierlot , Fabrice Petit et al.
Surface and Coatings Technology, 2010, 205 (4), pp.954-960. ⟨10.1016/j.surfcoat.2010.06.025⟩
Journal articles hal-03577740v1

Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray

Eli Saúl Puchi-Cabrera , M.H. Staia , M.J. Ortiz-Mancilla , J.G. La Barbera-Sosa , E.A. Ochoa Pérez et al.
Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. ⟨10.1016/j.surfcoat.2010.01.011⟩
Journal articles hal-03577744v1

Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization

J. Garcia Molleja , L. Nosei , J. Ferron , E. Bemporad , Jacky Lesage et al.
Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. ⟨10.1016/j.surfcoat.2010.04.036⟩
Journal articles hal-00494434v1

Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating

Eli Saúl Puchi-Cabrera , M.H. Staia , E.A. Ochoa-Pérez , D.G. Teer , Y.Y. Santana-Méndez et al.
Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. ⟨10.1016/j.msea.2009.09.030⟩
Journal articles hal-03577753v1

Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization

J. García Molleja , L. Nosei , J. Ferrón , E. Bemporad , J. Lesage et al.
Surface and Coatings Technology, 2010, 204 (23), pp.3750-3759. ⟨10.1016/j.surfcoat.2010.04.036⟩
Journal articles hal-03577746v1

Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies

Didier Chicot , F. Roudet , A. Zaoui , G. Louis , V. Lepingle et al.
Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. ⟨10.1016/j.matchemphys.2009.07.033⟩
Journal articles hal-03577754v1

Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid

Leszek Latka , Lech Pawlowski , Didier Chicot , Christel Pierlot , Fabrice Petit et al.
Surface and Coatings Technology, 2010, 205 (4), pp.954-960. ⟨10.1016/j.surfcoat.2010.06.025⟩
Journal articles hal-00527723v1

Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates

R. Vert , Didier Chicot , C. Dublanche-Tixier , E. Meillot , A. Vardelle et al.
Surface and Coatings Technology, 2010, 205 (4), pp.999-1003. ⟨10.1016/j.surfcoat.2010.07.090⟩
Journal articles hal-03577742v1

Thin film hardness determination using indentation loading curve modelling

Didier Chicot , L. Gil , K. Silva , F. Roudet , Eli Saúl Puchi-Cabrera et al.
Thin Solid Films, 2010, 518 (19), pp.5565-5571. ⟨10.1016/j.tsf.2010.05.063⟩
Journal articles hal-03577748v1

Thin film hardness determination using indentation loading curve modelling

Didier Chicot , L. Gil , K. Silva , Francine Roudet , Eli Saúl Puchi-Cabrera et al.
Thin Solid Films, 2010, 518 (19), pp.5565-5571. ⟨10.1016/j.tsf.2010.05.063⟩
Journal articles hal-00494445v1

Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating

Eli Saúl Puchi-Cabrera , M.H. Staia , E.A. Ochoa-Pérez , D.G. Teer , Y.Y. Santana-Mendez et al.
Materials Science and Engineering: A, 2010, 527 (3), pp.498-508. ⟨10.1016/j.msea.2009.09.030⟩
Journal articles hal-00444359v1
Image document

Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817

Gildas Guillemot , Alain Iost , Didier Chicot
Thin Solid Films, 2010, 518 (8), pp.2097-2101. ⟨10.1016/j.tsf.2009.07.178⟩
Journal articles hal-01174483v1

Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray

Eli Saúl Puchi-Cabrera , M.H. Staia , M.J. Ortiz-Mancilla , J.G. La Barbera-Sosa , E.A. Ochoa-Pérez et al.
Surface and Coatings Technology, 2010, 205 (4), pp.1119-1126. ⟨10.1016/j.surfcoat.2010.01.011⟩
Journal articles hal-00527716v1

Comments on the paper “Modification of composite hardness models to incorporate indentation size effects in thin films”, D. Beegan, S. Chowdhury and M.T. Laugier, Thin Solid Films 516 (2008), 3813–3817

Gildas Guillemot , A. Iost , Didier Chicot
Thin Solid Films, 2010, 518 (8), pp.2097-2101. ⟨10.1016/j.tsf.2009.07.178⟩
Journal articles hal-03577750v1

Depth-sensing indentation modeling for determination of Elastic modulus of thin films

A. Tricoteaux , G. Duarte , Didier Chicot , E. Le Bourhis , E. Bemporad et al.
Mechanics of Materials, 2010, 42 (2), pp.166-174. ⟨10.1016/j.mechmat.2009.11.016⟩
Journal articles hal-03577752v1

Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray

W.A. González-Hermosilla , Didier Chicot , J. Lesage , J.G. La Barbera-Sosa , I.C. Gruescu et al.
Materials Science and Engineering: A, 2010, 527 (24-25), pp.6551-6561. ⟨10.1016/j.msea.2010.07.014⟩
Journal articles hal-03577756v1

Influence of visco-elasto-plastic properties of magnetite on the elastic modulus: Multicyclic indentation and theoretical studies

Didier Chicot , Francine Roudet , Ali Zaoui , G. Louis , V. Lepingle et al.
Materials Chemistry and Physics, 2010, 119 (1-2), pp.75-81. ⟨10.1016/j.matchemphys.2009.07.033⟩
Journal articles hal-00429753v1

Depth-sensing indentation modeling for determination of Elastic modulus of thin films

Arnaud Tricoteaux , G. Duarte , Didier Chicot , E. Le Bourhis , E. Bemporad et al.
Mechanics of Materials, 2010, 42 (2), pp.166-174. ⟨10.1016/j.mechmat.2009.11.016⟩
Journal articles hal-00446606v1

Prediction of hardness-depth profile from indentations at surface of materials

Jacky Lesage , Didier Chicot , L. Nosei , Jorge Feugeas
Surface Engineering, 2009, 25 (2), pp.93-96. ⟨10.1179/026708408X336355⟩
Journal articles hal-00359655v1

Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of Titania, Alumina and Zirconia plasma sprayed coatings

Didier Chicot , G. Duarte , Arnaud Tricoteaux , B. Jorgowski , Anne Leriche et al.
Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. ⟨10.1016/j.msea.2009.08.058⟩
Journal articles hal-00429771v1

Strain gradient plasticity to study hardness behavior of magnetite (Fe3O4) under multicyclic indentation

Didier Chicot , Francine Roudet , V. Lepingle , G. Louis
Journal of Materials Research, 2009, 24 (3), pp.749-759. ⟨10.1557/JMR.2009.0098⟩
Journal articles hal-00376775v1

Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings

Didier Chicot , G. Duarte , A. Tricoteaux , B. Jorgowski , A. Leriche et al.
Materials Science and Engineering: A, 2009, 527 (1-2), pp.65-76. ⟨10.1016/J.MSEA.2009.08.058⟩
Journal articles hal-03577757v1

Un facteur d'échelle en dureté pour représenter l'effet de taille en nano et en micro-indentation

Francine Roudet , Johnny Mendoza , G. Duarte , Jacky Lesage , Didier Chicot et al.
Matériaux & Techniques, 2009, 96, pp.43-52. ⟨10.1051/mattech/2009005⟩
Journal articles hal-00643260v1

Hardness length-scale factor to model nano- and micro-indentation size effects

Didier Chicot
Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. ⟨10.1016/j.msea.2008.09.040⟩
Journal articles hal-03577760v1

Hardness length-scale factor to model nano- and micro-indentation size effects

Didier Chicot
Materials Science and Engineering: A, 2009, 499 (1-2), pp.454-461. ⟨10.1016/j.msea.2008.09.040⟩
Journal articles hal-00359663v1

Strain gradient plasticity to study hardness behavior of magnetite (Fe 3 O 4 ) under multicyclic indentation

Didier Chicot , F. Roudet , V. Lepingle , G. Louis
Journal of Materials Research, 2009, 24 (3), pp.749-759. ⟨10.1557/jmr.2009.0098⟩
Journal articles hal-03577758v1

Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF

J.G. La Barbera-Sosa , Y.Y. Santana , M.H. Staia , Didier Chicot , Jacky Lesage et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. ⟨10.1016/j.surfcoat.2008.04.041⟩
Journal articles hal-00290005v1

Model to determine the depth of a diffusion layer by normal indentations to the surface

D. Mercier , X. Decoopman , Didier Chicot
Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. ⟨10.1016/j.surfcoat.2007.12.010⟩
Journal articles hal-03577767v1

Corrosion behavior of Cr3C2–NiCr vacuum plasma sprayed coatings

M. Suarez , S. Bellayer , M. Traisnel , W. Gonzalez , Didier Chicot et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. ⟨10.1016/j.surfcoat.2008.04.043⟩
Journal articles hal-03577761v1

Analysis of data from various indentation techniques for thin films intrinsic hardness modelling

Didier Chicot , E. Bemporad , G. Galtieri , Francine Roudet , M. Alvisi et al.
Thin Solid Films, 2008, 516 (8), pp.1964-1971. ⟨10.1016/j.tsf.2007.10.003⟩
Journal articles hal-00262197v1

Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying

C.J. Villalobos-Gutiérrez , G.E. Gedler-Chacón , J.G. La Barbera-Sosa , A. Piñeiro , M.H. Staia et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. ⟨10.1016/j.surfcoat.2008.04.044⟩
Journal articles hal-03577762v1

Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings

Z. Marcano , J. Lesage , Didier Chicot , G. Mesmacque , Eli Saúl Puchi-Cabrera et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. ⟨10.1016/j.surfcoat.2008.04.017⟩
Journal articles hal-03577763v1

Fatigue and corrosion-fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC-10Co- 4Cr alloy deposited by HVOF thermal spraying

C.J. Villalobos-Gutierrez , G.E. Gedler-Chacon , J.G. La Barbera-Sosa , A. Pineiro , M.H. Staia et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4572-4577. ⟨10.1016/j.surfcoat.2008.04.044⟩
Journal articles hal-00288532v1

Corrosion behaviour of Cr3C2 -NiCr vacuum plasma sprayed coatings

M. Suarez , S. Bellayer , M. Traisnel , W. Gonzalez , Didier Chicot et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4566-4571. ⟨10.1016/j.surfcoat.2008.04.043⟩
Journal articles hal-00288505v1

Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings

Z. Marcano , Jacky Lesage , Didier Chicot , Gérard Mesmacque , Eli Saúl Puchi-Cabrera et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4406-4410. ⟨10.1016/j.surfcoat.2008.04.017⟩
Journal articles hal-00288559v1

Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve

Didier Chicot , David Mercier
Mechanics of Materials, 2008, 40 (4-5), pp.171-182. ⟨10.1016/j.mechmat.2007.07.002⟩
Journal articles hal-00204264v1

Improvement in depth-sensing indentation to calculate the universal hardness on the entire loading curve

Didier Chicot , D. Mercier
Mechanics of Materials, 2008, 40 (4-5), pp.171-182. ⟨10.1016/j.mechmat.2007.07.002⟩
Journal articles hal-03577769v1

Analysis of data from various indentation techniques for thin films intrinsic hardness modelling

Didier Chicot , E. Bemporad , G. Galtieri , F. Roudet , M. Alvisi et al.
Thin Solid Films, 2008, 516 (8), pp.1964-1971. ⟨10.1016/j.tsf.2007.10.003⟩
Journal articles hal-03577770v1

Model to determine the depth of a diffusion layer by normal indentations to the surface

David Mercier , Xavier Decoopman , Didier Chicot
Surface and Coatings Technology, 2008, 202 (14), pp.3419-3426. ⟨10.1016/j.surfcoat.2007.12.010⟩
Journal articles hal-00262131v1

Microstructural and mechanical characterization of Ni-base thermal spray coatings deposited by HVOF

J.G. La Barbera-Sosa , Y.Y. Santana , M.H. Staia , Didier Chicot , J. Lesage et al.
Surface and Coatings Technology, 2008, 202 (18), pp.4552-4559. ⟨10.1016/j.surfcoat.2008.04.041⟩
Journal articles hal-03577766v1

Interpretation of instrumented hardness measurements on stainless steel with different surface preparations

Didier Chicot , Francine Roudet , A. Soom , Jacky Lesage
Surface Engineering, 2007, 23 (1), pp.32-39. ⟨10.1179/174329407X161573⟩
Journal articles hal-00124435v1

Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics

Didier Chicot , D. Mercier , F. Roudet , K. Silva , M.H. Staia et al.
Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. ⟨10.1016/j.jeurceramsoc.2006.06.011⟩
Journal articles hal-03577781v1

Eddy currents to control steel decarburising

David Mercier , Didier Chicot , Xavier Decoopman , Jacky Lesage
Surface Engineering, 2007, 23 (4), pp.273-278. ⟨10.1179/174329407X215140⟩
Journal articles hal-00185229v1

Comparison of instrumented Knoop and Vickers hardness measurements on various soft materials and hard ceramics

Didier Chicot , David Mercier , Francine Roudet , K. Silva , M.H. Staia et al.
Journal of the European Ceramic Society, 2007, 27 (4), pp.1905-1911. ⟨10.1016/j.jeurceramsoc.2006.06.011⟩
Journal articles hal-00124408v1

Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness

M. Hadad , Guillaume Marot , P. Demarecaux , Didier Chicot , Jacky Lesage et al.
Surface Engineering, 2007, 23 (4), pp.279-283. ⟨10.1179/174329407X215159⟩
Journal articles hal-00185250v1

Measurement of residual stress in thermal spray coatings by the incremental hole drilling method

Y.Y. Santana , J.G. La Barbera-Sosa , M.H. Staia , Jacky Lesage , Eli Saúl Puchi-Cabrera et al.
Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. ⟨10.1016/j.surfcoat.2006.04.056⟩
Journal articles hal-00124458v1

Eddy currents and hardness testing for evaluation of steel decarburizing

David Mercier , Jacky Lesage , Xavier Decoopman , Didier Chicot
NDT & E International, 2006, 39 (8), pp.652-660. ⟨10.1016/j.ndteint.2006.04.005⟩
Journal articles hal-00124230v1

Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying

Eli Saúl Puchi-Cabrera , M.H. Staia , J. Lesage , Didier Chicot , J.G. La Barbera-Sosa et al.
Surface and Coatings Technology, 2006, 201 (5), pp.2038-2045. ⟨10.1016/j.surfcoat.2006.04.054⟩
Journal articles hal-03577783v1

Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel

Y. Benarioua , J. Lesage , E. Bemporad , Didier Chicot
Surface and Coatings Technology, 2006, 200 (18-19), pp.5447-5454. ⟨10.1016/j.surfcoat.2005.07.066⟩
Journal articles hal-03577789v1

Measurement of residual stress in thermal spray coatings by the incremental hole drilling method

Y.Y. Santana , J.G. La Barbera-Sosa , M.H. Staia , J. Lesage , Eli Saúl Puchi-Cabrera et al.
Surface and Coatings Technology, 2006, 201 (5), pp.2092-2098. ⟨10.1016/j.surfcoat.2006.04.056⟩
Journal articles hal-03577784v1

A model to determine the surface hardness of thin films from standard micro-indentation tests

J. Lesage , A. Pertuz , Eli Saúl Puchi-Cabrera , Didier Chicot
Thin Solid Films, 2006, 497 (1-2), pp.232-238. ⟨10.1016/j.tsf.2005.09.194⟩
Journal articles hal-03577790v1

Combined Micro-Hardness and Eddy Currents Applied to the Study of Steel Decarburizing

David Mercier , Didier Chicot
Revista Matéria, 2006, 11 (2), pp.88-100
Journal articles hal-00125228v1

A model to determine the surface hardness of thin films from standard micro-indentation tests

Jacky Lesage , A. Pertuz , Eli Saúl Puchi-Cabrera , Didier Chicot
Thin Solid Films, 2006, 497, pp.232-238. ⟨10.1016/j.tsf.2005.09.194⟩
Journal articles hal-00018995v1

Tribological study of WC produced by plasma pressure compaction

M.H. Staia , I.J. Torres , C. Castillo , T.S. Sudarshan , Jacky Lesage et al.
International Journal of Refractory Metals and Hard Materials, 2006, 24, pp.183-188. ⟨10.1016/j.ijrmhm.2005.06.006⟩
Journal articles hal-00018993v1

Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying

Eli Saúl Puchi-Cabrera , M.H. Staia , Jacky Lesage , Didier Chicot , J.G. La Barbera-Sosa et al.
Surface and Coatings Technology, 2006, 201, pp.2038-2045. ⟨10.1016/j.surfcoat.2006.04.054⟩
Journal articles hal-00096703v1

Tribological study of WC produced by plasma pressure compaction

M.H. Staia , I.J. Torres , C. Castillo , T.S. Sudarshan , J. Lesage et al.
International Journal of Refractory Metals and Hard Materials, 2006, 24 (1-2), pp.183-188. ⟨10.1016/j.ijrmhm.2005.06.006⟩
Journal articles hal-03577792v1

Titanium carbide films obtained by conversion of sputtered titanium on high carbon steel

Y. Benarioua , Jacky Lesage , E. Bemporad , Didier Chicot
Surface and Coatings Technology, 2006, 200, pp.5447-5454. ⟨10.1016/j.surfcoat.2005.07.066⟩
Journal articles hal-00021920v1

Eddy currents and hardness testing for evaluation of steel decarburizing

D. Mercier , J. Lesage , X. Decoopman , Didier Chicot
NDT & E International, 2006, 39 (8), pp.652-660. ⟨10.1016/j.ndteint.2006.04.005⟩
Journal articles hal-03577782v1

Application of the interfacial indentation test for adhesion toughness determination

Didier Chicot , P. Araujo , N. Horny , Arnaud Tricoteaux , Jacky Lesage et al.
Surface and Coatings Technology, 2005, 200, pp.174-177. ⟨10.1016/j.surfcoat.2005.02.045⟩
Journal articles hal-00019028v1

A model for hardness determination of thin coatings from standard micro-indentation tests

Jacky Lesage , Didier Chicot , A. Pertuz , Pierre-Yves Jouan , N. Horny et al.
Surface and Coatings Technology, 2005, 200, pp.886-889. ⟨10.1016/j.surfcoat.2005.01.056⟩
Journal articles hal-00019021v1

Application of the interfacial indentation test for adhesion toughness determination

Didier Chicot , P. Araujo , N. Horny , A. Tricoteaux , J. Lesage et al.
Surface and Coatings Technology, 2005, 200 (1-4), pp.174-177. ⟨10.1016/j.surfcoat.2005.02.045⟩
Journal articles hal-03577795v1

Residual stresses and adhesion of thermal spray coatings

P. Araujo , Didier Chicot , M. Staia , Jacky Lesage
Surface Engineering, 2005, 21, pp.35-40. ⟨10.1179/174329405X30020⟩
Journal articles hal-00069790v1

Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté

Y. Benarioua , Didier Chicot , Jacky Lesage
Journal of Physics IV France, 2005, 124, pp.195-199
Journal articles hal-00018954v1

A model for hardness determination of thin coatings from standard micro-indentation tests

J. Lesage , Didier Chicot , A. Pertuz , P.-Y. Jouan , N. Horny et al.
Surface and Coatings Technology, 2005, 200 (1-4), pp.886-889. ⟨10.1016/j.surfcoat.2005.01.056⟩
Journal articles hal-03577794v1

Caractérisation physique et mécanique de l'acier 4140 nitruré et implanté

Y. Benarioua , Didier Chicot , J. Lesage
Journal de Physique IV Proceedings, 2005, 124, pp.195-199. ⟨10.1051/jp4:2005124028⟩
Journal articles hal-03586281v1

Wear Behaviour of Silicon Carbide/Electroless Nickel Composite Coatings at High Temperature

M. Staia , A. Conzoño , M. Cruz , A. Roman , J. Lesage et al.
Surface Engineering, 2004, 18 (4), pp.265-269. ⟨10.1179/026708401225005359⟩
Journal articles hal-03577805v1

L'indentation appliquée à la caractérisation des matériaux

Jacky Lesage , Didier Chicot
Traitement Thermique, 2004, 359, pp.37-42
Journal articles hal-00138917v1

A new model to determine the hardness of thin films

Jacky Lesage , Alberto Pertuz , Didier Chicot
Revista Matéria, 2004, 9 (1), pp.13-22
Journal articles hal-00138919v1

Effects of grinding on the surface integrity of an austenitic stainless steel

H. Bléhaut , Didier Chicot , P. Flahaut , J. Lesage
Revue de Métallurgie, 2004, 101 (12), pp.1043-1052. ⟨10.1051/metal:2004110⟩
Journal articles hal-03577799v1

Difusao de hidrogenio en martensita

C.S. Vianna , Didier Chicot , Jacky Lesage , P.E.V. de Miranda
Revista Matéria, 2004, 9 (1), pp.1-12
Journal articles hal-00138903v1

Effects of grinding on the surface integrity of an austenitic stainless steel

H. Blehaut , Didier Chicot , P. Flahaut , Jacky Lesage
Revue de Métallurgie CIT, Science et Génie des Matériaux (CITY/SGM), 2004, 12, pp.1043-1052
Journal articles hal-00138191v1

New developments for fracture toughness determination by Vickers indentation

Didier Chicot , Alberto Pertuz , Francine Roudet , M.H. Staia , Jacky Lesage et al.
Materials Science and Technology, 2004, 20, pp.877-884. ⟨10.1179/026708304225017427⟩
Journal articles hal-00078025v1

Indentation tests to determine the fracture toughness of nickel phosphorus coatings

A Roman , Didier Chicot , J Lesage
Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. ⟨10.1016/S0257-8972(02)00109-3⟩
Journal articles hal-03577804v1

Fatigue crack initiation on plasma nitrided steel with and without hydrogen

M. Zampronio , P.E.V. de Miranda , O. Bartier , Didier Chicot , Jacky Lesage et al.
Acta Microscopica, 2002, 11, pp.31-36
Journal articles hal-00140387v1

Étude des transformations microstructurales survenant lors de l'endommagement par frottement sec d'un couple fonte/acierA study of microstructural transformations occurring during the deterioration by dry friction of an iron/steel pair

A Amrouche , Gérard Mesmacque , Didier Chicot
Mécanique et Industries, 2002, 3 (3), pp.237-243. ⟨10.1016/s1296-2139(02)01167-3⟩
Journal articles hal-03586283v1

Wear behaviour of silicon carbide / electroless nickel composite coatings at high temperatures

M. Staia , A. Conzono , M.R. Cruz , A. Roman , Jacky Lesage et al.
Surface Engineering, 2002, 18 (4), pp.265-269. ⟨10.1179/026708401225005359⟩
Journal articles hal-00140371v1

Role of residual stresses on interface toughness of thermally sprayed coatings

J. Lesage , Didier Chicot
Thin Solid Films, 2002, 415 (1-2), pp.143-150. ⟨10.1016/S0040-6090(02)00488-1⟩
Journal articles hal-03577800v1

Indentation tests to determine toughness of nickel phosphorus coatings

Adriana Roman , Didier Chicot , Jacky Lesage
Surface and Coatings Technology, 2002, 155 (2-3), pp.161-168. ⟨10.1016/S0257-8972(02)00109-3⟩
Journal articles hal-00140383v1

Role of residual stresses on interface toughness of thermaly sprayed coatings

Jacky Lesage , Didier Chicot
Thin Solid Films, 2002, 415 (1-2), pp.143-150. ⟨10.1016/S0040-6090(02)00488-1⟩
Journal articles hal-00140375v1

Part II: tribological performance of Cr3C2-25% NiCr reactive plasma sprayed coatings deposited at different pressures

M.H. Staia , T. Valente , C. Bartuli , D.B. Lewis , C.P. Constable et al.
Surface and Coatings Technology, 2001, 146-147, pp.563-570. ⟨10.1016/S0257-8972(01)01438-4⟩
Journal articles hal-03577808v1

Part II : Tribological performance of Cr3C2 - 25 % NiCr plasma sprayed coatings at different pressures

M.H. Staia , T. Valentine , C. Bartuli , D.B. Lewis , A. Roman et al.
Surface and Coatings Technology, 2001, 14-147, pp.563-570. ⟨10.1016/S0257-8972(01)01438-4⟩
Journal articles hal-00140879v1

Effect of substrate roughness induced by grit blasting upon adhesion of WC-17% Co thermal sprayed coatings

M.H. Staia , E. Ramos , A. Carrasquero , A. Roman , J. Lesage et al.
Thin Solid Films, 2000, 377-378, pp.657-664. ⟨10.1016/s0040-6090(00)01447-4⟩
Journal articles hal-03577814v1

Effect of thermal treatments on adhesive properties of a NiCr thermal sprayed coating

J. Lesage , M.H. Staia , Didier Chicot , C. Godoy , P.E.V. de Miranda et al.
Thin Solid Films, 2000, 377-378, pp.681-686. ⟨10.1016/S0040-6090(00)01450-4⟩
Journal articles hal-03577810v1

Role of hydrogen on adhesion of NiCr thermal sprayed coatings

Jacky Lesage , Didier Chicot , P. Araujo , M. Zampronio , P.E.V. de Miranda et al.
Thin Solid Films, 2000, 377-378, pp.675-680. ⟨10.1016/S0040-6090(00)01449-8⟩
Journal articles hal-00140874v1

Role of hydrogen on adhesion of NiCr thermal sprayed coatings

J. Lesage , Didier Chicot , P. Araujo , M. Zampronio , P.E.V. de Miranda et al.
Thin Solid Films, 2000, 377-378, pp.675-680. ⟨10.1016/S0040-6090(00)01449-8⟩
Journal articles hal-03577811v1

Influence of hydrogen contamination on the tensile behavior of a plasma ion nitrided steel

J. Lesage , Didier Chicot , O. Bartier , M.A. Zampronio , P.E.V. de Miranda et al.
Materials Science and Engineering: A, 2000, 282 (1-2), pp.203-212. ⟨10.1016/S0921-5093(99)00753-4⟩
Journal articles hal-03577815v1

Hardness measurements of Ti and TiC multilayers: a model

Didier Chicot , Y Bénarioua , J Lesage
Thin Solid Films, 2000, 359 (2), pp.228-235. ⟨10.1016/S0040-6090(99)00879-2⟩
Journal articles hal-03577817v1

Vers une optimisation des modèles de dureté de films minces

J. Lesage , Didier Chicot , Y. Benarioua , P. Araujo , P. Démarécaux et al.
Revue de Métallurgie, 1999, 96 (9), pp.1121-1130. ⟨10.1051/metal/199996091121⟩
Journal articles hal-03586290v1

Mesures par indentation interfaciale de l’adhérence de revêtements NiCr projetés thermiquement

J. Lesage , Didier Chicot , D. Judas , M. Zampronio , P. Araujo et al.
Matériaux & Techniques, 1999, 87 (9-10), pp.29-34. ⟨10.1051/mattech/199987090029⟩
Journal articles hal-03586292v1

Diffusion et solubilité de l’hydrogène dans un acier faiblement allié nitruré ioniquement

Didier Chicot , O. Bartier , M. Zampronio , P.E.V. de Miranda , J. Lesage et al.
Revue de Métallurgie, 1998, 95 (5), pp.659-668. ⟨10.1051/metal/199895050659⟩
Journal articles hal-03586298v1

Dureté des revêtements épais : modification du modèle de Jönsson et Hogmark

J. Lesage , Didier Chicot
Matériaux & Techniques, 1998, 86 (7-8), pp.33-38. ⟨10.1051/mattech/199886070033⟩
Journal articles hal-03586299v1

Influence de l'hydrogène sur le comportement en traction d'un acier faiblement allié nitruré ioniquement

J. Lesage , Didier Chicot , O. Bartier , M. Zampronio , P.E.V. de Miranda et al.
Revue de Métallurgie, 1998, 95 (12), pp.1511-1518. ⟨10.1051/metal/199895121511⟩
Journal articles hal-03586295v1

Hydrogen Diffusion in Plasma Ion Nitrided Steel

M.A. Zampronio , O. Bartier , Didier Chicot , J. Lesage , Paul de Miranda et al.
Defect and Diffusion Forum (Online), 1997, 143-147, pp.939-944. ⟨10.4028/www.scientific.net/DDF.143-147.939⟩
Journal articles hal-03577820v1

Mesure de la ténacité apparente d’interface par l’essai d’indentation interfaciale

Didier Chicot , P. Démarécaux , J. Lesage
Revue de Métallurgie, 1996, 93 (2), pp.245-254. ⟨10.1051/metal/199693020245⟩
Journal articles hal-03586302v1

Interface indentation test for the determination of adhesive properties of thermal sprayed coatings

Ph. Demarecaux , Didier Chicot , J. Lesage
Journal of Materials Science Letters, 1996, 15 (16), pp.1377-1380. ⟨10.1007/BF00275281⟩
Journal articles hal-03577822v1

Apparent interface toughness of substrate and coating couples from indentation tests

Didier Chicot , P Démarécaux , J Lesage
Thin Solid Films, 1996, 283 (1-2), pp.151-157. ⟨10.1016/0040-6090(96)08763-9⟩
Journal articles hal-03577821v1

Elastic properties determination from indentation tests

Didier Chicot , I. Hage , P. Démarécaux , J. Lesage
Surface and Coatings Technology, 1996, 81 (2-3), pp.269-274. ⟨10.1016/0257-8972(95)02474-3⟩
Journal articles hal-03577823v1

Estimation du module d’Young par analyse de la géométrie de l’empreinte résiduelle après indentation Vickers

Didier Chicot , I. Hage , J. Lesage
Revue de Métallurgie, 1995, 92 (5), pp.635-643. ⟨10.1051/metal/199592050635⟩
Journal articles hal-03586307v1

Apport de la diffraction des rayons X à l’étude d’un acier faiblement allié nitruré ioniquement par plasma

Didier Chicot , O. Bartier , M. Zampronio , P.E.V. de Miranda , J. Lesage et al.
Matériaux & Techniques, 1995, 83 (1-2), pp.45-49. ⟨10.1051/mattech/199583010045⟩
Journal articles hal-03586310v1

Absolute hardness of films and coatings

Didier Chicot , J. Lesage
Thin Solid Films, 1995, 254 (1-2), pp.123-130. ⟨10.1016/0040-6090(94)06239-H⟩
Journal articles hal-03577824v1

Microhardness and spectroscopy studies of surface modification of titanium alloys by melted metaphosphates

M. Deffontaines-Fourez , B. Deffontaines , Didier Chicot , A. Iost
Thin Solid Films, 1994, 241 (1-2), pp.230-233. ⟨10.1016/0040-6090(94)90431-6⟩
Journal articles hal-03577825v1

Dureté des matériaux déposés en couches minces

Didier Chicot , J. Lesage
Matériaux & Techniques, 1994, 82 (10), pp.19-23. ⟨10.1051/mattech/199482100019⟩
Journal articles hal-03586314v1

Role of microstructure and residual stresses on fatigue crack initiation of carbonitrided steels

Jacky Lesage , Didier Chicot , Mohamed Al Karaishi
Steel Research International, 1989, 60 (8), pp.370-374. ⟨10.1002/srin.198901670⟩
Journal articles hal-03577826v1

High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads: Part II

Geovana Drumond , Bianca Pinheiro , Ilson Pasqualino , Francine Roudet , Didier Chicot et al.
Volume 4: Materials Technology, 2018, Madrid, Spain. pp.V004T03A025, ⟨10.1115/omae2018-78752⟩
Conference papers hal-03254175v1

High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads

Geovana Drumond , Bianca Pinheiro , Ilson Pasqualino , Francine Roudet , Xavier Decoopman et al.
ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, Jun 2017, Trondheim, France. pp.012010, ⟨10.1115/OMAE2017-62677⟩
Conference papers hal-03580196v1
Image document

Sliding wear resistance of thermal sprayed wc-12co coatings reinforced with carbon nanotubes

Y.Y. Santana , M.V. Gutiérrez , Mariana Staia , J.G. La Barbera-Sosa , Eli Saúl Puchi-Cabrera et al.
Surface Modification Technologies, Jul 2017, Mons, Belgium. pp.1-7
Conference papers hal-03169289v1
Image document

Recubrimientos nanoestructurados de circonia estabilzada con itria (ysz) depositados mediante técnicas de termorrociado por plasma en suspensión

Mariana Staia , Stephania Kossman , V Contrepas , Didier Chicot , Alain Iost et al.
VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, Jun 2017, Ciudad Real, Spain
Conference papers hal-03169319v1

Effects of solution concentration and spraying parameters on TBCs obtained by SPPS process

Pablo Carpio , Rolando Candidato , Lech Pawlowski , P. Chagnon , D. Chicot et al.
8 RIPT, SPCTS, Dec 2017, Limoges, France
Conference papers hal-01887579v1
Image document

Modelisation de la courbe de decharge en indentation instrumentee

Stéphania Kossmann , Thierry Coorevits , Didier Chicot , Alain Iost
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-01564980v1
Image document

STUDY OF THE INFLUENCE OF THE ELASTIC RECOVERY DURING CONVENTIONAL KNOOP INDENTATION TESTS ON CERAMICS

G Ben Ghorbal , A Tricoteaux , A Thuault , G Louis , Didier Chicot et al.
XXXI International Conference on Surface Modification Technologies, Jul 2016, Mons, Belgium
Conference papers hal-03580213v1

The evaluation of mechanical properties of suspension plasma sprayed zirconia coatings having various microstructures

Paweł Sokołowski , A. Mejias , D. Chicot , Lech Pawlowski
ITSC 2016, May 2016, Shangai, China
Conference papers hal-01848500v1
Image document

Caracterisation par indentation multi-echelles de materiaux massifs et de garniture de frein

Stéphania Kossmann , Didier Chicot , Alain Iost
Indentation 2016, Oct 2016, Lille, France
Conference papers hal-01564976v1