Frédéric Bernard Professeur des Universités - PRCE2Université Bourgogne EuropeICB - UMR 6303 CNRS

Publications

Article dans une revue (82)

Thermodynamic modeling and experimental study of protective barriers against carbon diffusion during spark plasma sintering process R. Charvet,Maria-Rosa Ardigo-Besnard,A. Besnard,F. Baras,S. Le Galletet al. Scripta Materialia, 2026, 271, pp.116983. ⟨10.1016/j.scriptamat.2025.116983⟩ Article dans une revue hal-05246697v1
Alumina-SiC composites for enhanced ballistic performance using Spark Plasma Sintering Guillaume Rayrat,Yann Bald,Florence Moitrier,Paul Beillard,Anthony Bracqet al. Ceramics International, 2026, 52 (3), pp.3310-3323. ⟨10.1016/j.ceramint.2025.12.122⟩ Article dans une revue hal-05563287v1
A new sinter-forging process based on a 915 MHz solidstate microwave source for sintering of oxides ceramics Guillaume Rayrat,Alexis Onfroy,Christelle Bilot,Frédéric Bernard,Sébastien Lemonnieret al. Journal of the European Ceramic Society, 2025, 45 (7), pp.117262. ⟨10.1016/j.jeurceramsoc.2025.117262⟩ Article dans une revue hal-05131575v1
Microstructural and applied pressure heterogeneities in spark plasma sintering induced by hole punch Guillaume Rayrat,Julie Rossit,Florence Moitrier,Anthony Bracq,Sébastien Lemonnieret al. Journal of the European Ceramic Society, 2025, 45 (12), pp.117420. ⟨10.1016/j.jeurceramsoc.2025.117420⟩ Article dans une revue hal-05417042v1
Method for material extrusion additive manufacturing process made of bio-based polymer. Application for tool steel powders Nicolas Charpentier,Thierry Barrière,Frédéric Bernard,Nathalie Boudeau,Alexandre Gilbinet al. Powder Technology, 2024, 438, pp.119591. ⟨10.1016/j.powtec.2024.119591⟩ Article dans une revue hal-04745721v1
Effects of spark plasma sintering and nanodiamond amount on titanium-nanodiamond composite properties G. Kalfayan,F. Bussière,Julie Bourgon,F. Herbst,N. Geoffroyet al. Diamond and Related Materials, 2024, 146, pp.111210. ⟨10.1016/j.diamond.2024.111210⟩ Article dans une revue hal-04947823v1
Super ductile metallic glasses for energy-saving solid-state processing Thierry Barriere,Frédéric Bernard,Xavier Gabrion,Stani Carbillet,Sami Holopainenet al. Materials & Design, 2023, 232, pp.112112 (9). ⟨10.1016/j.matdes.2023.112112⟩ Article dans une revue hal-04224562v1
Atomization regime observation and characterization of an atomized pure zinc rod during centrifugal atomization using a LASER beam B. Ravry,Alexandre Mathieu,J. Allenou,B. Stepnik,F. Bernardet al. Powder Technology, 2023, 415, pp.118139. ⟨10.1016/j.powtec.2022.118139⟩ Article dans une revue hal-04151708v1
Study of Structural, Compression, and Soft Magnetic Properties of Fe65Ni28Mn7 Alloy Prepared by Arc Melting, Mechanical Alloying, and Spark Plasma Sintering Kaouther Zaara,Virgil Optasanu,Sophie Le Gallet,Lluisa Escoda,Joan Saurinaet al. Materials, 2023, 16, ⟨10.3390/ma16227244⟩ Article dans une revue hal-04334650v1
Comparison of thermal diffusion and interfacial reactions for bulk and sputtered titanium on 316L stainless steel Jean-Marc Auger,Dominique Cotton,Corinne Nouveau,Aurélien Besnard,Frédéric Bernardet al. Materials Chemistry and Physics, 2023, 306, pp.128013. ⟨10.1016/j.matchemphys.2023.128013⟩ Article dans une revue hal-04143409v1
Synthesis of TiC(1-x)–ZrCx (x=0.2) composite by FAST-SPS-FCT technology, effect of SWCNTs and nano-WC additions on structural properties: Application for ballistic protection Badis Bendjemil,Safi Khaoula,Ilyas Kouahla,Mohamed Mouyane,Mustapha Arianet al. Experimental and Theoretical Nanotechnology, 2023, pp.461-480. ⟨10.56053/7.3.463⟩ Article dans une revue hal-04299388v1
Centrifugal atomization of stainless-steel rotating rods melted by a high-power LASER beam B. Ravry,A. Mathieu,J. Allenou,B. Sinardet,S. Pernotet al. Advanced Powder Technology, 2022, 33 (6), pp.103631. ⟨10.1016/j.apt.2022.103631⟩ Article dans une revue hal-04155925v1
Elaboration and Characterization of WMoTaNb High Entropy Alloy Prepared by Powder Metallurgy Processes Mathias Moser,Sarah Dine,Dominique Vrel,Loïc Perrière,Rémy Pirès-Brazunaet al. Materials, 2022, 15 (15), pp.5416. ⟨10.3390/ma15155416⟩ Article dans une revue hal-03871956v1
Effect of Electric Current on SPS Densification of Spherical Copper Powder Romaric Collet,Sophie Le Gallet,Frédéric Charlot,Sabine Lay,Jean-Marc Chaixet al. Journal of Manufacturing and Materials Processing, 2021, 5 (4), pp.119. ⟨10.3390/jmmp5040119⟩ Article dans une revue hal-03416939v1
Densification of non-radioactive porous siliceous particles loaded with cesium potassium copper hexacyanoferrate by spark plasma sintering Nicolas Massoni,Sophie Le Gallet,Lionel Campayo,Robert J. Koch,Scott T. Mistureet al. Journal of the European Ceramic Society, 2021, 41, pp.1506 - 1513. ⟨10.1016/j.jeurceramsoc.2020.10.024⟩ Article dans une revue hal-03492742v1
High-Entropy FeCoNiB0.5Si0.5 Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering Zaara Kaouther,Mahmoud Chemingui,Sophie Le Gallet,Yves Gaillard,Lluisa Escodaet al. Crystals, 2020, 10 (10), pp.929. ⟨10.3390/cryst10100929⟩ Article dans une revue hal-04012362v1
Microstructure-oxidation resistance relationship in Ti3AlC2 MAX phase E. Drouelle,V. Gauthier-Brunet,J. Cormier,P. Villechaise,P. Sallotet al. Journal of Alloys and Compounds, 2020, 826, pp.154062. ⟨10.1016/j.jallcom.2020.154062⟩ Article dans une revue hal-02481033v1
New insight on the lithium hydride–water vapor reaction system G. Weber,E. Sciora,J. Guichard,F. Bouyer,I. Bezverkhyyet al. International Journal of Hydrogen Energy, 2018, 43 (50), pp.22557-22567. ⟨10.1016/j.ijhydene.2018.10.089⟩ Article dans une revue hal-02324513v1
Investigation of hydrolysis of lithium oxide by thermogravimetry, calorimetry and in situ FTIR spectroscopy Guy Weber,Elisabeth Sciora,Jordan Guichard,Frédéric Bouyer,Igor Bezverkhyyet al. Journal of Thermal Analysis and Calorimetry, 2018, 132 (2), pp.1055-1064. ⟨10.1007/s10973-017-6943-7⟩ Article dans une revue hal-02324521v1
Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites B. Lanfant,Y. Leconte,N. Debski,G. Bonnefont,M. Pinaultet al. Ceramics International, 2018, 45 (2), pp.2566-2575. ⟨10.1016/j.ceramint.2018.10.187⟩ Article dans une revue cea-02295165v1
Discrete multi-physics: A mesh-free model of blood flow in flexible biological valve including solid aggregate formation Mostapha Ariane,Mohamed Hatem Allouche,Marco Bussone,Fausto Giacosa,Frédéric Bernardet al. PLoS ONE, 2017, 12 (4), pp.e0174795. ⟨10.1371/journal.pone.0174795⟩ Article dans une revue hal-05432485v1
Oxide reduction effects in SPS processing of Cu atomized powder containing oxide inclusions R. Collet,S. Le Gallet,F. Charlot,S. Lay,J.M. Chaixet al. Materials Chemistry and Physics, 2016, 173 (1-2), pp.498-507. ⟨10.1016/j.matchemphys.2016.02.044⟩ Article dans une revue istex hal-01367283v1
Thermal-electrical-mechanical simulation of the nickel densification by Spark Plasma Sintering. Comparison with experiments Cyprien Wolff,Sébastien Mercier,Hervé Couque,Alain Molinari,Frédéric Bernardet al. Mechanics of Materials, 2016, 100, pp.126-147. ⟨10.1016/j.mechmat.2016.06.012⟩ Article dans une revue istex hal-03225688v1
French Studies on the Development of Potential Conditioning Matrices for Iodine 129 Lionel Campayo,F. Audubert,Jean-Eric Lartigue,Eglantine Courtois-Manara,Sophie Le Galletet al. Materials Research Society Symposia Proceedings, 2015, 1744, ⟨10.1557/opl.2015.309⟩ Article dans une revue hal-01969879v1
Sintering of synthetic barytocalcite BaCa(CO3)2, kutnahorite CaMn(CO3)2 and rhodochrosite MnCO3 for carbon-14 sequestration Nicolas Massoni,Sophie Le Gallet,Stefan Hoffmann,Patrick Launeau,Yuri Grinet al. Journal of the European Ceramic Society, 2015, 35 (1), pp.297-308. ⟨10.1016/j.jeurceramsoc.2014.08.002⟩ Article dans une revue istex cea-02015354v1
Effects of carbon and oxygen on the spark plasma sintering additive-free densification and on the mechanical properties of nanostructured SiC ceramics B. Lanfant,Y. Leconte,G. Bonnefont,V. Garnier,Yves Jorandet al. Journal of the European Ceramic Society, 2015, 35 (13), pp.3369-3379. ⟨10.1016/j.jeurceramsoc.2015.05.014⟩ Article dans une revue istex hal-01187781v1
Relevance of the choice of spark plasma sintering parameters in obtaining a suitable microstructure for iodine-bearing apatite designed for the conditioning of I-129 L. Campayo,S. Le Gallet,D. Perret,E. Courtois,C. Cau Dit Coumeset al. Journal of Nuclear Materials, 2015, 457, pp.63-71. ⟨10.1016/j.jnucmat.2014.10.026⟩ Article dans une revue istex hal-04732903v1
Powder metallurgy processing and deformation characteristics of bulk multimodal nickel L. Farbaniec,G. Dirras,A. Krawczynska,Frédéric Mompiou,H. Couqueet al. Materials Characterization, 2014, 94, pp.126-137. ⟨10.1016/j.matchar.2014.05.008⟩ Article dans une revue istex hal-01729354v1
Design optimization of plasma facing component with functional gradient material Cu/W interlayer E. Autissier,M. Richou,F. Bernard,M. Missirlian Fusion Engineering and Design, 2013, 88 (9-10), pp.1714 - 1717. ⟨10.1016/j.fusengdes.2013.04.042⟩ Article dans une revue istex cea-04738422v1
Control of FeAl Composition Produced by SPS Reactive Sintering from Mechanically Activated Powder Mixture Sébastien Paris,Eric Gaffet,F. Bernard Journal of Nanomaterials, 2013, ⟨10.1155/2013/150297⟩ Article dans une revue hal-01283883v1
Design of a reactor operating in supercritical water conditions using CFD simulations. Examples of synthesized nanomaterials Frédéric Demoisson,Moustapha Ariane,Antoine Leybros,Hervé Muhr,Frédéric Bernard Journal of Supercritical Fluids, 2011, 58 (3), pp.371-377. ⟨10.1016/j.supflu.2011.07.001⟩ Article dans une revue istex hal-00778463v1
In situ study of the sintering of a lead phosphovanadate in an Environmental Scanning Electron Microscope E. Courtois,G. Thollet,L. Campayo,S. Le Gallet,O. Bidaultet al. Solid State Ionics, 2011, 186 (1), pp.53-58. ⟨10.1016/j.ssi.2011.01.004⟩ Article dans une revue istex hal-01813669v1
Experimental investigation of the grain size dependence of the hydrolysis of LiH powder C. Maupoix,J.L. Houzelot,E. Sciora,G. Gaillard,S. Chartonet al. Powder Technology, 2011, 208 (2), pp.318. ⟨10.1016/j.powtec.2010.08.023⟩ Article dans une revue istex hal-00591916v1
Combustion synthesis of MoSi2 and MoSi2–Mo5Si3 composites: Multilayer modeling and control of the microstructure Florence Baras,Dilip Kondepudi,Frédéric Bernard Journal of Alloys and Compounds, 2010, 505 (1), pp.43 Article dans une revue hal-00514230v1
Continuous hydrothermal synthesis of inorganic nanopowders in supercritical water: Towards a better control of the process Anne Aimable,H. Muhr,C. Gentric,F. Bernard,F. Le Craset al. Powder Technology, 2009, 190 (1-2), pp.99-106. ⟨10.1016/j.powtec.2008.04.064⟩ Article dans une revue istex hal-00508330v1
Spark Plasma Sintering à partir de poudres mécaniquement activées : compréhension des transitions de phase au cours d'un frittage réactif G. Cabouro,N. Reinfried,Eric Gaffet,Y. Grin,S. Chevalieret al. Matériaux et Techniques, 2007, 95 (4-5), pp.269-280. ⟨10.1051/mattech:2008011⟩ Article dans une revue hal-00599067v1
Correlation between milling parameters and microstructure characteristics of nanocrystalline copper powder prepared via a high energy planetary ball mill Frédéric Bernard,Oleg Boytsov,Eric Gaffet,Anatolii Ustinov Journal of Alloys and Compounds, 2007, 432 (432), pp.110 - 117. ⟨10.1016/j.allcom.2006.05.101⟩ Article dans une revue hal-00432260v1
Time-resolved X-ray diffraction study of SHS-produced NiAl and NiAl-ZrO2 composites D. Tingaud,L. Stuppfler,S. Paris,D. Vrel,F. Bernardet al. International Journal of Self-Propagating High-Temperature Synthesis, 2007, 16 (1), pp.1-16. ⟨10.3103/S106138620701⟩ Article dans une revue hal-00179438v1
Spark plasma sintering of cobalt ferrite nanopowders prepared by coprecipitation and hydrothermal synthesis. N. Millot,S. Le Gallet,D. Aymes,F. Bernard,Y. Grin Journal of the European Ceramic Society, 2007, 27, pp.921-926. ⟨10.1016/j.jeurceramsoc.2006.04.141⟩ Article dans une revue istex hal-00116595v1
Microstructural aspects of gasless combustion of mechanically activated mixtures. I. High-speed microvideorecording of the Ni-Al composition A. S. Rogachev,N. A. Kochetov,W. Kurbatkina,E. A. Levashov,P. S. Grinchuket al. Combustion, Explosion, and Shock Waves, 2006, 42 (4), pp.421-429. ⟨10.1007/s10573-006-0071-1⟩ Article dans une revue istex hal-00438149v1
Production of dense nanostructured materials using FAPAS and SPS techniques Frédéric Bernard,Eric Gaffet,Zuhair Munir Ceramic Transactions, 2006, 194, pp.235 - 249 Article dans une revue hal-00432261v1
Structure and composition heterogeneity of a FeAl alloy prepared by one-step synthesis and consolidation processing and their influence on grain size characterization Gang Ji,Daniel Goran,Frédéric Bernard,Thierry Grosdidier,Eric Gaffetet al. Journal of Alloys and Compounds, 2006, 420 (1-2), pp.158 - 164. ⟨10.1016/j.jallcom.2005.10.058⟩ Article dans une revue istex hal-00109999v1
Synthesis of Bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering Thierry Grosdidier,Gang Ji,Frédéric Bernard,Eric Gaffet,Zuhair Muniret al. Intermetallics, 2006, 14 (10-11), pp.1208 - 1213. ⟨10.1016/j.intermet.2005.11.033⟩ Article dans une revue istex hal-00109991v1
Combustion wave structure during the MoSi2 synthesis by Mechanically-Activated Self-propagating High-temperature Synthesis (MASHS) : In situ time-resolved investigations Christophe Gras,Eric Gaffet,Frédéric Bernard Intermetallics, 2006, 14 (5), pp.521 - 529. ⟨10.1016/j.intermet.2005.09.001⟩ Article dans une revue istex hal-00110003v1
Structure and composition heterogeneity of a FeAl alloy prepared by one-step synthesis and consolidation processing and their influence on grain size characterization. Gang Ji,Daniel Goran,Frédéric Bernard,Thierry Grosdidier,Eric Gaffetet al. Journal of Alloys and Compounds, 2006, 420, pp.158-164. ⟨10.1016/j.jallcom.2005.10.058⟩ Article dans une revue istex hal-00084720v1
Combustion wave structure during the MoSi2 synthesis by Mechanically-Activated Self-propagating High-temperature Synthesis (MASHS) : In situ time-resolved investigations. Christophe Gras,Eric Gaffet,Frédéric Bernard Intermetallics, 2006, 14, pp.521-529. ⟨10.1016/j.intermet.2005.09.001⟩ Article dans une revue istex hal-00016649v1
Evolution of nanostructure states of Cu-powders prepared by ball milling O. Boytsov,A. Ustinov,E. Gaffet,F. Bernard Acta Crystallographica Section A : Foundations of Crystallography [1968-2013], 2005, 61 (a1), pp.c449-c450. ⟨10.1107/S0108767305081109⟩ Article dans une revue hal-03340315v1
Surface adsorption effects on the lattice expansion of copper nanocrystals Y. Champion,F. Bernard,Nadine Millot,Pascal Perriat Applied Physics Letters, 2005, pp.1-3 Article dans une revue hal-00436774v1
Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures F. Bernard,Sophie Le Gallet,N. Spinassou,S. Paris,E. Gaffetet al. Science of Sintering, 2004, 36 (3), pp.155-164. ⟨10.2298/SOS0403155B⟩ Article dans une revue hal-04163931v1
Electrochemical behavior of nanocrystalline iron aluminide obtained by mechanically activated field activated pressure assisted synthesis O. El Kedim,S. Paris,C. Phigini,F. Bernard,E. Gaffetet al. Materials Science and Engineering: A, 2004, 369 (1-2), pp.49 - 55. ⟨10.1016/j.msea.2003.10.271⟩ Article dans une revue istex hal-00110018v1
Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides S. Paris,E. Gaffet,F. Bernard,Z.A Munir Scripta Materialia, 2004, 50 (5), pp.691-696. ⟨10.1016/j.scriptamat.2003.11.019⟩ Article dans une revue istex hal-00110020v1
Investigation of mechanically activated field-activated pressure-assisted synthesis processing parameters for producing dense nanostructured FeAl S. Paris,Ch. Valot,L. Gosmain,E. Gaffet,F. Bernardet al. Journal of Materials Research, 2003, 18 (10), pp.2331-2338. ⟨10.1557/JMR.2003.0327⟩ Article dans une revue istex hal-00110031v1
Sintering of copper nanopowders under hydrogen: an in situ X-ray diffraction analysis. Y. Champion,F. Bernard,N. Guigue-Millot,Pascal Perriat Materials Science and Engineering: A, 2003, pp.258-263 Article dans une revue hal-00475132v1
Particle Size Dependency of Ternary Diagrams at the Nanometer Scale: Evidence of TiO2 Clusters in Fe-Based Spinels Nadine Millot,D. Aymes,F. Bernard,J.C. Niepce,A. Traverseet al. Journal of Physical Chemistry B, 2003, pp.5740-5750 Article dans une revue hal-00475136v1
The mechanically activated combustion reaction in the Fe-Si system : in situ time-resolved synchrotron investigations Ch. Gras,N. Bernsten,F. Bernard,E. Gaffet Intermetallics, 2002, 10 (3), pp.271 - 282. ⟨10.1016/S0966-9795(01)00136-4⟩ Article dans une revue istex hal-00118180v1
Simultaneous synthesis and consolidation of nanostructured MoSi2 Christophe Gras,Frédéric Bernard,Frédéric Charlot,Eric Gaffet,Zuhair Munir Journal of Materials Research, 2002, 17, pp.542 - 549. ⟨10.1557/JMR.2002.0076⟩ Article dans une revue istex hal-00118183v1
Investigations of the formation mechanism of nanostructured NbAl3 via MASHS reaction V. Gauthier,F. Bernard,E. Gaffet,D. Vrel,M Gailhanouet al. Intermetallics, 2002, 10 (4), pp.377 - 389. ⟨10.1016/S0966-9795(02)00010-9⟩ Article dans une revue istex hal-00118179v1
Segregation phenomena in nanometric titanium ferrites: Complementarity of different experimental techniques (DRX, XPS, EXAFS...) N. Guigue-Millot,F. Bernard,J.C. Niepce,A. Traverse,Pascal Perriat Journal de Physique IV Proceedings, 2002, pp.473-479 Article dans une revue hal-00475483v1
A new experimental setup for the time resolved X – ray diffraction study of self – propagating high temperature synthesis D. Vrel,N. Girodon-Boulandet,S. Paris,J.-F. Mazué,E. Couqueberget al. Review of Scientific Instruments, 2002, 73 (2), pp.422 - 428. ⟨10.1063/1.1435848⟩ Article dans une revue hal-00118185v1
Mechanical alloying in the SHS research F. Bernard,Eric Gaffet International Journal of Self-Propagating High Temperature Synthesis, 2001, 10 (2), pp.109 - 132 Article dans une revue hal-00122913v1
Synthesis of nanocrystalline NbAl3 by mechanically activated field activated pressure assisted technique V. Gauthier,F. Bernard,E. Gaffet,Z.A Munir,J.-P. Larpin Intermetallics, 2001, 9 (7), pp.571 - 580. ⟨10.1016/S0966-9795(01)00040-1⟩ Article dans une revue istex hal-00118186v1
One step synthesis and consolidation of nanophase materials Frédéric Bernard,Frédéric Charlot,Eric Gaffet,Zuhair Munir Journal of the American Ceramic Society, 2001, 84 (5), pp.910 - 914. ⟨10.1111/j.1151-2916.2001.tb00767.x⟩ Article dans une revue istex hal-00131152v1
Chemical heterogeneities in nanometric titanomagnetites prepared by soft chemistry and studied ex situ : evidence for fe-segregation and oxidation kinetics N. Guigue-Millot,Y. Champion,Martin Hÿtch,F. Bernard,Sylvie Begin-Colinet al. Journal of Physical Chemistry B, 2001, pp.7125-7132 Article dans une revue hal-00475337v1
Mechanical activation effect on the self-sustaining combustion reaction in the Mo–Si system Ch Gras,D. Vrel,E. Gaffet,F. Bernard Journal of Alloys and Compounds, 2001, 314 (1-2), pp.240-250. ⟨10.1016/S0925-8388(00)01221-4⟩ Article dans une revue istex hal-00118187v1
Reactivity of Cu3Si of different genesis towards copper(I) chloride H Souha,F. Bernard,E. Gaffet,B. Gillot Thermochimica Acta, 2000, 351 (1-2), pp.71 - 77. ⟨10.1016/S0040-6031(00)00365-8⟩ Article dans une revue istex hal-00131156v1
Elaboration of the Cu3Si compound using a mechanically activated annealing process H. Souha,E. Gaffet,F. Bernard,J. Niepce Journal of Materials Science, 2000, 35 (13), pp.3221 - 3226. ⟨10.1023/A:1004806918391⟩ Article dans une revue istex hal-00131154v1
Enhancement of self sustaining reaction Cu3Si phase formation starting from mechanically activated powders F. Bernard,H. Souha,E. Gaffet Materials Science and Engineering: A, 2000, 284 (1-2), pp.301 - 306. ⟨10.1016/S0921-5093(00)00749-8⟩ Article dans une revue istex hal-00131155v1
Synthesis of niobium aluminides using mechanically activated self-propagating high-temperature synthesis and mechanically activated annealing process V. Gauthier,C. Josse,F. Bernard,E. Gaffet,J.-P. Larpin Materials Science and Engineering: A, 1999, 265 (1-2), pp.117 - 128. ⟨10.1016/S0921-5093(98)01141-1⟩ Article dans une revue istex hal-00131161v1
In-situ time resolved X-ray diffraction study of the formation of the nanocrystalline NbAl3 phase by mechanically activated self-propagating high-temperature synthesis reaction V. Gauthier,F. Bernard,E. Gaffet,C. Josse,J.P Larpin Materials Science and Engineering: A, 1999, 272 (2), pp.334 - 341. ⟨10.1016/S0921-5093(99)00488-8⟩ Article dans une revue istex hal-00131159v1
Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system F. Charlot,E. Gaffet,B. Zeghmati,F. Bernard,J.-C. Niepce Materials Science and Engineering: A, 1999, 262 (1 - 2), pp.279 - 288. ⟨10.1016/S0921-5093(98)01017-X⟩ Article dans une revue istex hal-00131166v1
In situ synchrotron characterization of mechanically activated self - propagating high temperature synthesis applied in Mo - Si system C.H Gras,F. Charlot,E. Gaffet,F. Bernard,J.C Niepce Acta Materialia, 1999, 47(7) (7), pp.2113 - 2123. ⟨10.1016/S1359-6454(99)00084-1⟩ Article dans une revue istex hal-00131165v1
Some recent developments in mechanical activation and mechanosynthesis Eric Gaffet,Frédéric Bernard,Jean-Claude Niepce,Frédéric Charlot,Christophe Graset al. Journal of Materials Chemistry, 1999, 9 (1), pp.305-314. ⟨10.1039/a804645j⟩ Article dans une revue istex hal-05366907v1
In situ time-resolved diffraction coupled with a thermal i.r. camera to study mechanically activated SHS reaction: case of Fe–Al binary system F. Charlot,F. Bernard,D. Klein,E. Gaffet,J.-C. Niepce Acta Materialia, 1999, 47 (2), pp.619 - 629 Article dans une revue hal-00131168v1
Enhancement of self - sustaining reaction by mechanical activation : case of Fe Si system Ch. Gras,E. Gaffet,F. Bernard,J.C. Niepce Materials Science and Engineering: A, 1999, 264, pp.94 - 107. ⟨10.1016/S0921-5093(98)01108-3⟩ Article dans une revue hal-00131163v1
Mechanical activation conditions of the Fe2O3 and V2O3 mixture powders in order to obtain a nanometric vanadium spinel ferrite Virginie Nivoix,Frédéric Bernard,Eric Gaffet,Pascal Perriat,Bernard Gillot Powder Technology, 1999, 105 (1-3), pp.155-161. ⟨10.1016/S0032-5910(99)00131-X⟩ Article dans une revue istex hal-04241949v1
Cation Distribution in a Titanium Ferrite Fe2.75Ti0.25O4Measured byin-SituAnomalous Powder Diffraction Using Rietveld Refinement F. Bernard,J. Lorimier,Virginie Nivoix,N. Millot,P. Perriatet al. Journal of Solid State Chemistry, 1998, 141 (1), pp.105-113. ⟨10.1006/jssc.1998.7924⟩ Article dans une revue istex hal-04241954v1
Cation Distribution in Ferrites with Spinel Structure Measured by Anomalous Powder Diffraction Frédéric Bernard,J. Lorimier,Virginie Nivoix,N. Millot,P. Perriatet al. Materials Science Forum, 1998, 278-281, pp.594-599. ⟨10.4028/www.scientific.net/MSF.278-281.594⟩ Article dans une revue hal-04241960v1
Activation mécanique d'oxydes de fer et de vanadium en vue d'une synthèse de ferrite de vanadium nanométrique similaire au composé issu de la chimie douce - Mechanical activation of iron and vanadium oxides in order to obtain nanometric vanadium ferrite similar to a soft chemistry compound Virginie Nivoix,Éric Gaffet,Frédéric Bernard,Bernard Gillot Comptes rendus de l’Académie des sciences. Série IIc, Chimie, 1998, 1 (3), pp.183-189. ⟨10.1016/S1387-1609(99)80078-4⟩ Article dans une revue istex hal-05366897v1
Utilisation de la diffraction résonnante pour déterminer la distribution cationique d'un ferrite de titane nanométrique F. Bernard,J. Lorimier,Virginie Nivoix,N. Millot,N. Kelleret al. Journal de Physique IV Proceedings, 1998, 08 (PR5), pp.Pr5-99-Pr5-107. ⟨10.1051/jp4:1998514⟩ Article dans une revue istex hal-04241955v1
Activation mécanique d'oxydes de fer et de vanadium en vue d'une synthèse de ferrite de vanadium nanométrique similaire au composé issu de la chimie douce Virginie Nivoix,Éric Gaffet,Frédéric Bernard,Bernard Gillot Comptes rendus de l’Académie des sciences. Série IIc, Chimie, 1998, 1 (3), pp.183-189. ⟨10.1016/S1387-1609(99)80078-4⟩ Article dans une revue istex hal-04241961v1
Experimental Equipment for Studying the Residual Stresses Developed During High Temperature Reactions by X-Ray Diffraction F. Bernard,E. Sciora,N. Gerard Journal de Physique IV Proceedings, 1996, 06 (C4), pp.C4-259-C4-266. ⟨10.1051/jp4:1996424⟩ Article dans une revue istex jpa-00254307v1
Une technique de correction du &quot;décalage&quot; d'un échantillon au cours d'expériences sur un diffractomètre à compteur à localisation courbe F. Bernard,F. Charlot,P. Sarrazin Journal de Physique IV Proceedings, 1996, 06 (C4), pp.C4-103-C4-110. ⟨10.1051/jp4:1996410⟩ Article dans une revue istex jpa-00254293v1

Pré-publication, Document de travail (1)

High-fidelity modeling of interface crossing in the diffusion welding process at the polycrystalline scale Camille Godinot,Emmanuel Rigal,Frédéric Bernard,Philippe Emonot,Pierre-Eric Frayssineset al. 2025 Pré-publication, Document de travail hal-05446965v1

Communication dans un congrès (15)

Développement de revêtements PVD pour limiter la diffusion du carbone lors du frittage par SPS d'une poudre de fer Romain Charvet,Maria-Rosa Ardigo-Besnard,Frédéric Bernard,Sophie Le Gallet,Aurélien Besnardet al. 51ème Congrès A3TS des traitements thermiques et des traitements de surface, Jul 2025, Dijon, France Communication dans un congrès hal-05334404v1
Modelling The First Compaction Stage Of A Metallic Powder By Rearrangement During Load Assisted Sintering: Oedometric Experiment And DEM Simulation Petr Mamykin,Jean-Philippe Chateau-Cornu,Frédéric Bernard Euro Powder Metallurgy 2023 Congress & Exhibition, Mar 2023, Lisbon (Portugal), Portugal. ⟨10.59499/EP235751775⟩ Communication dans un congrès hal-05344572v1
New Model And Adjustment Protocol For The Viscoplastic Stage Of Densification During Load Assisted Sintering : Application To Hot Isostatic Pressing Of A 316L Steel Powder Jean-Philippe Chateau-Cornu,Khalil Chaaban,Mostapha Ariane,Frédéric Bernard,Maria-Rosa Ardigo-Besnardet al. World Powder Metallurgy 2022 Congress & Exhibition, Oct 2022, Lyon, France. ⟨10.59499/WP225372095⟩ Communication dans un congrès hal-05344554v1
Influence of the microstructure on the durability of hard coatings obtained from metal powders M.R. Ardigo-Besnard,J.-P. Chateau-Cornu,F. Bernard La métallurgie, quel avenir!, Société Française de Métallurgie et de Matériaux (SF2M); Réseau National de la Métallurgie (RNM), Jun 2016, Saint-Etienne, France Communication dans un congrès hal-04023425v1
Etablissement et évolution des interfaces lors du soudage diffusion Emmanuel Rigal,Nicolas Bouquet,Marc Bernacki,Frédéric Bernard JA 2015 - Journées annuelles de la SF2M, Matériaux et conversion d'énergie, Oct 2015, Paris, France Communication dans un congrès hal-01247744v1
Nano-SiC/CNT composites sintered by SPS: CNT amount effect on mechanical, thermal and electrical properties. B. Lanfant,Y. Leconte,N. Debski,M. Pinault,M. Mayneet al. 3rd International Workshop on Spark Plasma Sintering, Jul 2014, Toulouse, France Communication dans un congrès hal-01095227v1
Production of nano oxides with a continuous supercritical water device Frédéric Demoisson,Mostapha Ariane,Romain Piolet,Antoine Leybros,Coralie Quadriet al. 10th International Symposium on Supercritical Fluids, May 2012, San Francisco, United States Communication dans un congrès hal-04758317v1
Influence of supercritical water processing parameters on zinc oxide nano-structure using both experimental and CFD approaches Romain Piolet,Frédéric Demoisson,Antoine Leybros,Mostapha Ariane,Frédéric Bernard 13th European Meeting on Supercritical Fluids, Oct 2011, The Hague, Netherlands Communication dans un congrès hal-04758309v1
Consolidation and mechanical properties of nano-SiC/carbon nanotubes composite ceramics sintered by SPS F. Lomello,G. Bonnefont,Y. Leconte,Gilbert Fantozzi,V. Garnieret al. European Congress on Advanced Materials and Processes (Euromat 2011), Sep 2011, Montpellier, France Communication dans un congrès hal-00660615v1
La technologie FAST, une solution rapide pour fritter, assembler et synthétiser différentes classes de matériaux Foad Naimi,L. Minier,Sophie Le Gallet,Jean-Claude Niepce,Frédéric Bernard CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France Communication dans un congrès hal-03420916v1
Synthesis and characterization of nanocrystalline NiTi by mechanical alloying S. Tria,O. Elkedim,F. Bernard 16th International Symposium on Metastable and Nanostructured Materials, ISMANAM 2009, Jul 2009, Beijing, China Communication dans un congrès hal-00437787v1
Elaboration et caractérisations structurales d'alliages à mémoire de forme Ni-Ti par mécanosynthèse : application microcapteurs et microactionneurs S. Tria,O. Elkedim,R. Hamzaoui,J.Y. Rauch,F. Bernard 6èmes journées Maghreb-Europe sur les matériaux et leurs applications aux dispositifs et capteurs, MADICA 2008, Oct 2008, Rabat, Maroc Communication dans un congrès hal-00357857v1
Characterisation of nanostructured NiTi alloys prepared by mechanical alloying S. Tria,O. Elkedim,F. Bernard JUNIOR EUROMAT 2008, Jun 2008, Switzerland Communication dans un congrès hal-00346492v1
From the synthesis of carbide nanopowders by laser and plasma driven processes to their densification by flash sintering methods Y. Leconte,M. Leparoux,L. Combemale,X. Portier,G. Kaliszet al. European Congress on Advanced Materials and Processes (Euromat 2007), Sep 2007, Nuremberg, Germany Communication dans un congrès hal-00179670v1
SHS reaction: a well-adapted process for producing Nanostructured materials A.G. Merzhanov,Eric Gaffet,A. Systchev,F. Bernard Mini Colloque "Matériaux nanostructurés : Elaboration et propriétés" aux Journées de la Matière Condensée, Aug 2004, Nancy, France Communication dans un congrès hal-05389354v1

Chapitre d'ouvrage (1)

Spark Plasma Sintering of Metallic Glasses Loic Perriere,Yannick Champion,F. Bernard Pasquale Cavaliere. Spark Plasma Sintering of Materials: Advances in Processing and Applications, Springer, pp.291-335, 2019, ⟨10.1007/978-3-030-05327-7_11⟩ Chapitre d'ouvrage hal-02348564v1

Poster de conférence (5)

The nucleation and growth of zinc oxide nanoparticles from ambient to supercritical conditions Frédéric Demoisson,Romain Piolet,Mostapha Ariane,Antoine Leybros,Frédéric Bernard 14th European Meeting on Supercritical Fluids, May 2014, Marseille, France Poster de conférence cea-04760533v1
CFD simulation in supercritical water: design of a reactor and prediction tool for morphology of ZnO nanoparticles Mostapha Ariane,Frédéric Demoisson,Antoine Leybros,Romain Piolet,Frédéric Bernard 14th European Meeting on Supercritical Fluids, May 2014, Marseille, France Poster de conférence cea-04760525v1
Modelling of zinc oxide nanoparticle formation in a continuous supercritical water synthesis process Romain Piolet,Antoine Leybros,Mostapha Ariane,Frédéric Demoisson,Frédéric Bernard 10th International Symposium on Supercritical Fluid, May 2012, San Francisco, United States Poster de conférence cea-04760520v1
Zinc oxide nanoparticles continuous supercritical water synthesis. Nucleation and growth mechanisms formation using CFD Antoine Leybros,Romain Piolet,Mostapha Ariane,Frédéric Bernard,Frédéric Demoisson 13eme congrés de la Société Française de Génie des Procédés, Nov 2011, Lille, France Poster de conférence cea-04760510v1
Original supercritical water device for continuous production of nanopowders. Examples of synthesized nano-oxides Frédéric Demoisson,Mostapha Ariane,Romain Piolet,Antoine Leybros,Frédéric Bernard 13th European Meeting on Supercritical Fluids, Oct 2011, The Hague, Netherlands Poster de conférence cea-04760504v1

Brevet (1)

Particle synthesis by means of the thermal hydrolysis of mineral precursors D. Aymes,Mostapha Ariane,F. Bernard,Hervé Muhr,Frédéric Demoisson France, Patent n° : WO 2011 010056 (2011). 2011 Brevet hal-01095440v1

Proceedings/Recueil des communications (4)

Effect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi2 Sébastien Chevalier,Frédéric Bernard,Eric Gaffet,Sébastien Paris,Z.A. Muniret al. 6th International Symposium on High Temperature Corrosion and Protection of Materials, May 2004, Les Embiez, France. Materials Science Forum, 461-464, pp.439-446, 2004, ⟨10.4028/www.scientific.net/MSF.461-464.439⟩ Proceedings/Recueil des communications hal-05372452v1
Role of the Microstructure on the High Temperature Oxidation Properties of the Intermetallic Compound NbAl3 V. Gauthier,Jean Pierre Larpin,Michel Vilasi,Frédéric Bernard,Eric Gaffet 5th International Symposium on High Temperature Corrosion and Protection of Materials, May 2000, LES EMBIEZ, France. Materials Science Forum, 369-372, pp.793-800, 2001, ⟨10.4028/www.scientific.net/MSF.369-372.793⟩ Proceedings/Recueil des communications hal-05372508v1
Mechanically Activated Self-Propagating High Temperature Synthesis (MASHS) Applied to the MoSi2 and FeSi2 Phase Formation Ch. Gras,Eric Gaffet,Frédéric Bernard,Federic Charlot,J.C. Niepce 1998 International Symposium on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM-98, Dec 1998, Wollongong, Sydney, Australia, Australia. Materials Science Forum, 2-6, pp.281-286, 1999, ⟨10.4028/www.scientific.net/JMNM.2-6.281⟩ Proceedings/Recueil des communications hal-05372684v1
Mechanically Activated SHS Reaction in the Fe-Al System: In Situ Time Resolved Diffraction Using Synchrotron Radiation Eric Gaffet,Federic Charlot,Didier Klein,Frédéric Bernard,J.C. Niepce International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM 97), Aug 1997, BARCELONA, SPAIN, Spain. Materials Science Forum, 269-272, pp.379-384, 1998, ⟨10.4028/www.scientific.net/MSF.269-272.379⟩ Proceedings/Recueil des communications hal-05372549v1