François Girardin

Publications

Article dans une revue (23)

On the design of Optimal Health Indicators for early fault detection and their statistical thresholds Jérôme Antoni,Kayacan Kestel,Cédric Peeters,Quentin Leclère,François Girardinet al. Mechanical Systems and Signal Processing, 2024, 218, pp.111518. ⟨10.1016/j.ymssp.2024.111518⟩ Article dans une revue hal-04915055v1
Informed sparsity-based blind filtering in the presence of second-order cyclostationary noise Kayacan Kestel,Cédric Peeters,Jérôme Antoni,Quentin Leclère,François Girardinet al. Mechanical Systems and Signal Processing, 2023, 199, pp.110438. ⟨10.1016/j.ymssp.2023.110438⟩ Article dans une revue hal-04915135v1
Informed sparsity-based blind filtering in the presence of second-order cyclostationary noise Kayacan Kestel,Cédric Peeters,Jérôme Antoni,Quentin Leclere,François Girardinet al. Mechanical Systems and Signal Processing, 2023, 199, pp.110438. ⟨10.1016/j.ymssp.2023.110438⟩ Article dans une revue hal-04467030v1
A reference-free mill monitoring method based on the inter-insert periodic correlation in angular domain Xiaowen Zhu,François Girardin,Jérôme Antoni International Journal of Advanced Manufacturing Technology, 2022, 121 (1-2), pp.1063-1080. ⟨10.1007/s00170-022-09330-w⟩ Article dans une revue hal-03964638v1
Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/ mixed ceramic tool (Al2O3 + TiC)) Oussama Zerti,Mohamed Athmane Yallese,Abderrahmen Zerti,Salim Belhadi,François Girardin International Journal of Industrial Engineering Computations, 2018, pp.173-194. ⟨10.5267/j.ijiec.2017.7.001⟩ Article dans une revue hal-01999575v1
Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach Lakhdar Bouzid,Sofiane Berkani,Mohamed Athmane Yallese,François Girardin,Tarek Mabrouki International Journal of Industrial Engineering Computations, 2018, pp.349-368. ⟨10.5267/j.ijiec.2017.8.002⟩ Article dans une revue hal-01999581v1
On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit Hamid Tebassi,Mohamed Athmane Yallese,Ikhlas Meddour,François Girardin,Tarek Mabrouki Periodica Polytechnica Mechanical Engineering, 2017, 61 (1), pp.1-11. ⟨10.3311/PPme.8742⟩ Article dans une revue hal-01999568v1
Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach Hamid Tebassi,Mohamed Athmane Yallese,Salim Belhadi,François Girardin,Tarek Mabrouki International Journal of Industrial Engineering Computations, 2017, pp.347-362. ⟨10.5267/j.ijiec.2016.12.003⟩ Article dans une revue hal-01999573v1
Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function Amel Chabbi,Mohamed Athmane Yallese,Ikhlas Meddour,Mourad Nouioua,Tarek Mabroukiet al. Measurement - Journal of the International Measurement Confederation (IMEKO), 2017, 95, pp.99-115. ⟨10.1016/j.measurement.2016.09.043⟩ Article dans une revue hal-01999564v1
Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods A. Chabbi,A. Yallese,M. Nouioua,I. Meddour,T. Mabroukiet al. International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2267-2290. ⟨10.1007/s00170-016-9858-8⟩ Article dans une revue hal-01999555v1
Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN) Mourad Nouioua,Mohamed Athmane Yallese,Riad Khettabi,Salim Belhadi,Mohamed Lamine Bouhalaiset al. International Journal of Advanced Manufacturing Technology, 2017, 93 (5-8), pp.2485-2504. ⟨10.1007/s00170-017-0589-2⟩ Article dans une revue hal-01999559v1
Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts Mohamed Fnides,Mohamed Yallese,Riad Khattabi,Tarek Mabrouki,François Girardin International Journal of Industrial Engineering Computations, 2017, pp.493-512. ⟨10.5267/j.ijiec.2017.3.001⟩ Article dans une revue hal-01999574v1
Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718 Hamid Tebassi,Mohamed Athmane Yallese,Riad Khettabi,Salim Belhadi,Ikhlas Meddouret al. International Journal of Industrial Engineering Computations, 2016, pp.111-134. ⟨10.5267/j.ijiec.2015.7.003⟩ Article dans une revue hal-01999571v1
Performance of coated and uncoated mixed ceramic tools in hard turning process Hamza Bensouilah,Hamdi Aouici,Ikhlas Meddour,Mohamed Athmane Yallese,Tarek Mabroukiet al. Measurement - Journal of the International Measurement Confederation (IMEKO), 2016, 82, pp.1-18. ⟨10.1016/j.measurement.2015.11.042⟩ Article dans une revue hal-01999561v1
Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel Lakhdar Bouzid,Smail Boutabba,Mohamed Athmane Yallese,Salim Belhadi,Francois Girardin International Journal of Advanced Manufacturing Technology, 2014, 74 (5-8), pp.879-891. ⟨10.1007/s00170-014-6043-9⟩ Article dans une revue hal-01122464v1
Precision of the IAS monitoring system based on the elapsed time method in the spectral domain Hugo Andre,François Girardin,A. Bourdon,Jérôme Antoni,Didier Rémond Mechanical Systems and Signal Processing, 2014, 44 (1-2), pp.14-30. ⟨10.1016/j.ymssp.2013.06.020⟩ Article dans une revue hal-00916257v1
Angular analysis of the cyclic impacting oscillations in a robotic grinding process Farzad Rafieian,François Girardin,Zhaoheng Liu,Marc Thomas,Bruce Hazel Mechanical Systems and Signal Processing, 2014, 44 (1-2), p. 160-176. ⟨10.1016/j.ymssp.2013.05.005⟩ Article dans une revue istex hal-00919926v1
Indicators for monitoring chatter in milling based on instantaneous angular speeds Mourad Lamraoui,Marc Thomas,Mohamed El Badaoui,François Girardin Mechanical Systems and Signal Processing, 2014, 44 (1-2), p. 72-85. ⟨10.1016/j.ymssp.2013.05.002⟩ Article dans une revue istex hal-00879748v1
Towards a physical comprehension of material strengthening factors during macro to micro-scale Muhammad Asad,Tarek Mabrouki,François Girardin,Yancheng Zhang,Jean Francois Rigal Mechanika, 2011, 17 (1), pp.97-104 Article dans une revue hal-00581081v1
High frequency correction of dynamometer for cutting force observation in milling François Girardin,Didier Remond,Jean-François Rigal JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132 (3), 031002 (8 p.). ⟨10.1115/1.4001538⟩ Article dans une revue hal-00938586v1
Tool wear detection in milling-an original approach with a non-dedicated sensor Francois Girardin,Didier Remond,Jean-Francois Rigal Mechanical Systems and Signal Processing, 2010, 24 (6), pp.1907-1920. ⟨10.1016/j.ymssp.2010.02.008⟩ Article dans une revue istex hal-00938587v1
A new method for detecting tool wear and breakage in milling François Girardin,Didier Rémond,Jean-François Rigal International Journal of Material Forming, 2010, 3 (1), pp.463-466. ⟨10.1007/s12289-010-0807-z⟩ Article dans une revue hal-00949599v1
Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351) Tarek Mabrouki,François Girardin,Muhammad Asad,Jean-François Rigal International Journal of Machine Tools & Manufacture, 2008, 48 (11), pp.1187-1197. ⟨10.1016/j.ijmachtools.2008.03.013⟩ Article dans une revue istex hal-00383575v1

Communication dans un congrès (25)

Generalized likelihood ratio-based condition indicator maximization via Rayleigh quotient iteration Kayacan Kestel,Cédric Peeters,Jérôme Antoni,Quentin Leclere,Francois Girardinet al. ISMA 2022, 2022, Leuven (BE), Belgium Communication dans un congrès hal-04018655v1
Discussion on the Differences Between the Cyclic Spectral Correlation and Coherence for Cyclostationarity-Based Condition Monitoring Kayacan Kestel,Cédric Peeters,Jérôme Antoni,Quentin Leclère,François Girardinet al. 14th Annual Conference of the Prognostics and Health Management Society, Oct 2022, Nashville, United States. ⟨10.36001/phmconf.2022.v14i1.3150⟩ Communication dans un congrès hal-03964667v1
Angular velocity and cyclo(non)stationarity as an innovation in machining monitoring Xiaowen Zhu,Francois Girardin,Jérôme Antoni ISMA2020 Conference on Noise and Vibration Engineering, Sep 2020, Leuven, Belgium Communication dans un congrès hal-03211986v1
Fatigue crack detection based on changes of the structure vibration characteristics Raissa D M Brandão,Nacer Hamzaoui,François Girardin,Pascal Voagner,Thierry Mazoyer Surveillance 9, May 2017, Fez (Maroc), Morocco Communication dans un congrès hal-03983974v1
Analysis of the Rolling Element Bearing data set of the Center for Intelligent Maintenance Systems of the University of Cincinnati William Gousseau,Jérôme Antoni,François Girardin,Julien Griffaton CM2016, Oct 2016, Charenton, France Communication dans un congrès hal-01715193v1
Modeling and optimization of tool wear and surface roughness in turning of austenitic stainless steel using response surface methodology Sofian Berkani,Lakhdar Bouzid,Hamza Bensouilah,Mohamed Athman Yallese,François Girardinet al. CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03446160v1
Preliminary investigation on the detection of slow-growing cracks in vibrating structures Raissa de Melo Brandao,Nacer Hamzaoui,François Girardin,Pascal Vouagner,Thierry Mazoyer Surveillance 8, Oct 2015, Roanne, France Communication dans un congrès hal-01282821v1
Détection des amorces de défaillances lentes des structures vibrantes Raissa de Melo Brandao,Nacer Hamzaoui,François Girardin,Pascal Vouagner,Thierry Mazoyer 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-01282817v1
Optimisation des paramètres de coupe par l'analyse de la rugosité Meriem Dib,François Girardin,Nacer Hamzaoui,Lakhdar Laouar CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03446167v1
Détection des amorces de défaillances lentes des structures vibrantes Raissa de Melo Brandao,François Girardin,Nacer Hamzaoui,Pascal Vouagner,Thierry Mazoyer CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03446173v1
An Analysis of Instantaneous Angular Speed Measurement Errors Q. Leclere,François Girardin,Didier Rémond Surveillance 7 International Conference, Oct 2013, CHARTRES, France. pp.1-11 Communication dans un congrès hal-00905103v1
Cyclostationarity analysis of instantaneous angular speeds for monitoring chatter in high speed milling Mourad Lamraoui,Marc Thomas,Mohamed El Badaoui,François Girardin IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics, Oct 2012, Montreal, Canada. pp.3868-3873, ⟨10.1109/IECON.2012.6389274⟩ Communication dans un congrès hal-03948171v1
Using angular speed measurement with Hall effect sensors to observe grinding operation with flexible robot François Girardin,Farzad Rafieian,Zhaoheng Liu,Marc Thomas,Bruce Hazel Surveillance 6, Oct 2011, Compiègne, France Communication dans un congrès hal-03948233v1
Détection de l'usure des outils de coupe en fraisage par vitesse instantanée François Girardin,Didier Rémond,Jean Francois Rigal 28th CMVA seminar, Oct 2010, Québec, Canada. pp.CDRom Communication dans un congrès hal-00504795v1
A new method for detecting tool wear and breakage in milling François Girardin,Didier Rémond,Jean Francois Rigal 13th International ESAFORM Conference on Material Forming, Apr 2010, Brescia, Italy. pp.CDRom Communication dans un congrès hal-00504766v1
An original approach for in situ measurement of cutting force and monitoring in milling François Girardin,Didier Rémond,Jean Francois Rigal 2nd International Conference Process Machine Interactions, Jun 2010, Vancouver, Canada. pp.CDRom Communication dans un congrès hal-00504765v1
A new technique for cutting characterisation and monitoring in milling François Girardin,Didier Rémond,Jean Francois Rigal 17° Colloque Vibrations Chocs et Bruit, Jun 2010, Ecully, France. pp.CDRom Communication dans un congrès hal-00504796v1
Surveillance de l'usure et de l'endommagement d'outils en usinage grande vitesse à l'aide de la mesure de vitesse instantanée Didier Rémond,François Girardin,Jean Francois Rigal 2° congrès international sur l'ingénierie des risques industriels, May 2009, Reims, France. pp.CDRom Communication dans un congrès hal-00486224v1
Le dynamomètre KISTLER au delà des limites officielles : cas d'une utilisation en fraisage à grande vitesse François Girardin,Didier Rémond,Jean-François Rigal 11° Colloque AIP PRIMECA, Apr 2009, LaPlagne, France. pp.1-7 Communication dans un congrès hal-00694864v1
Mise au point doutils de caractérisation à haute fréquence de la coupe en fraisage, en vue dapplication à des cas dUGV François Girardin,Didier Remond,Jean-François Rigal 13ème session MANUFACTURING 21, Apr 2008, France Communication dans un congrès hal-00506181v1
High frequency caracterisation of milling, 16° François Girardin,Didier Remond,Jean-François Rigal Colloque Vibrations Chocs et Bruit, Jun 2008, France Communication dans un congrès hal-00506221v1
Caractérisation à haute fréquence de la coupe en fraisage François Girardin,Didier Remond,Jean-François Rigal XVIème colloque VCB (Vibrations, Choc et Bruit), Jun 2008, France Communication dans un congrès hal-00506207v1
Dry cutting study of an aluminium alloy (a2024-t351) : a numerical and experimental approach&quot; Key note paper M. Asad,François Girardin,Tarek Mabrouki,Jean-François Rigal 11th ESAFORM2008 conference on material forming., Apr 2008, France Communication dans un congrès hal-00506211v1
Contribution à la caractérisation à haute frequence de la coupe ugv François Girardin,Didier Remond,Jean-François Rigal 5èmes assises MUGV (Machine et Usinage à Grande Vitesse), Jun 2008, France Communication dans un congrès hal-00506208v1
Etude dynamique de la formation du copeau Contribution : un modèle de simulation numérique pour le fraisage des alliages daluminium M. Asad,François Girardin,Tarek Mabrouki,Jean-François Rigal 10ème coll. Nat. AIP PRIMECA, Apr 2007, France Communication dans un congrès hal-00506644v1