François Hild

402

Documents

Publications

	Determination of interfacial fracture energy of an environmental barrier coating on ceramic matrix composite substrate Pierre Bertrand , Cédric Huchette , Thibaut Archer , Thomas Vandellos , François Hild Journal of the European Ceramic Society, 2025, 45 (2), pp.116886. ⟨10.1016/j.jeurceramsoc.2024.116886⟩ Journal articles hal-04760047v1
	Brightness and Contrast Corrections for Space-Time Stereocorrelation via Proper Generalized Decomposition Xuyang Chang , Corentin Le Gourriérec , François Hild , Stéphane Roux Mechanical Systems and Signal Processing, 2025, 224, pp.111946. ⟨10.1016/j.ymssp.2024.111946⟩ Journal articles hal-04694801v1
	Damage quantification in concrete under uniaxial compression using microcomputed tomography and digital volume correlation with consideration of heterogeneity Shangyu Yang , Haizhou Liu , Lingtao Mao , Fangao Li , Bingjie Wei Mechanics of Materials, 2024, 199, pp.105178. ⟨10.1016/j.mechmat.2024.105178⟩ Journal articles hal-04743622v1
	Fracture mechanisms of an environmental barrier coating under thermomechanical loadings Ines Hamadouche , Thibaut Archer , Pierre Beauchêne , Thomas Vandellos , François Hild Journal of the European Ceramic Society, 2024, 44 (15), pp.116737. ⟨10.1016/j.jeurceramsoc.2024.116737⟩ Journal articles hal-04653493v1
	Quantifying 3D Crack Propagation in Nodular Graphite Cast Iron Using Advanced Digital Volume Correlation and X-ray Computed Tomography Haizhou Liu , François Hild Engineering Fracture Mechanics, 2024, 296, pp.109824. ⟨10.1016/j.engfracmech.2023.109824⟩ Journal articles hal-04367117v1
	A 3D pantographic metamaterial behaving as a mechanical shield: Experimental and numerical evidence Alessandro Ciallella , Ivan Giorgio , Emilio Barchiesi , Gianluca Alaimo , Alberto Cattenone Materials & Design, 2024, 237, pp.112554. ⟨10.1016/j.matdes.2023.112554⟩ Journal articles hal-04367094v1
	Tensile deformation and failure of AlSi10Mg random cellular metamaterials Laura Salvi , Benjamin Smaniotto , François Hild , M Gabriella Tarantino International Journal of Mechanical Sciences, 2024, 281, pp.109612. ⟨10.1016/j.ijmecsci.2024.109612⟩ Journal articles hal-04663846v1
	Parameter identification of a phase-field fracture model using integrated digital image correlation Viktor Kosin , Amélie Fau , Clément Jailin , François Hild , Thomas Wick Computer Methods in Applied Mechanics and Engineering, 2024, 420, pp.116689. ⟨10.1016/j.cma.2023.116689⟩ Journal articles hal-04343331v1
	Damage detection and quantification via multiview DIC at varying scales Israe Hamadouche , Darius Seyedi , François Hild Experimental Mechanics, 2024, 64, pp.675-689. ⟨10.1007/s11340-024-01038-0⟩ Journal articles hal-04436627v1
	Employing Williams' series for the identification of fracture mechanics parameters from phase-field simulations Leon M. Kolditz , Samy Dray , Viktor Kosin , Amélie Fau , François Hild Engineering Fracture Mechanics, 2024, 307, pp.110298. ⟨10.1016/j.engfracmech.2024.110298⟩ Journal articles hal-04642699v1
	Investigation Into Debonding of Single Polypropylene Fiber Pullout in Concrete Using X-Ray Microtomography and Mechanically Regularized Digital Volume Correlation Yujie Bi , Haizhou Liu , Lingtao Mao , Jiaojiao Liu , Yifan Liu Materials and structures, 2024, 57, pp.188. ⟨10.1617/s11527-024-02466-z⟩ Journal articles hal-04691909v1
	Link between b.c.c.–f.c.c. orientation relationship and austenite morphology in CF8M stainless steel Maxime Mollens , Adrien Guery , Dominique Loisnard , François Hild , Stéphane Roux Journal of Applied Crystallography, 2024, 57 (5), pp.1598-1608. ⟨10.1107/S1600576724008392⟩ Journal articles hal-04780543v1
	Digital image correlation analyses of masonry infilled frame: Uncertainty-based mesh refinement and damage quantification Vinicius Fiocco Sciuti , Rafael Vargas , Nestor Guerrero , María Eugenia Marante , François Hild Mathematics and Mechanics of Solids, 2024, ⟨10.1177/10812865231174840⟩ Journal articles hal-04079689v1
	Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C Rafael Vargas Maginador , Igor Paganotto Zago , Vinicius Fiocco Sciuti , Matheus Furlan , Ricardo Afonso Angélico Materials Research, 2024, 27 (6), ⟨10.1590/1980-5373-mr-2024-0072⟩ Journal articles hal-04572922v1
	Brightness and contrast corrections for stereocorrelation: Global and instantaneous formulation with spatial regularization Xuyang Chang , Corentin Le Gourriérec , François Hild , Stéphane Roux Mechanical Systems and Signal Processing, 2024, 208, pp.111057. ⟨10.1016/j.ymssp.2023.111057⟩ Journal articles hal-04361420v1
	Mechanical identification with the reconditioned equilibrium gap method: Formulation, analysis and comparisons Rémi Pierre Léo Haustrate , François Hild , Amélie Fau Computer Methods in Applied Mechanics and Engineering, 2024, 432, pp.117343. ⟨https://doi.org/10.1016/j.cma.2024.117343⟩ Journal articles hal-04677962v1
	Damage Detection in a Polymer Matrix Composite from 4D Displacement Field Measurements Ana Mandić , Viktor Kosin , Clément Jailin , Zvonimir Tomičević , Benjamin Smaniotto Materials, 2023, 16 (18), pp.6300. ⟨10.3390/ma16186300⟩ Journal articles hal-04216079v1
	Multiscale Damage Analyses of Red Sandstone in Uniaxial Compression Based on Advanced Digital Volume Correlation Haizhou Liu , Lingtao Mao , Xuyang Chang , François Hild Rock Mechanics and Rock Engineering, 2023, 56 (12), pp.8623-8641. ⟨10.1007/s00603-023-03504-y⟩ Journal articles hal-04368666v1
	4D full-field measurements over the entire loading history: Evaluation of different temporal interpolations Ana Vrgoč , Viktor Kosin , Benjamin Smaniotto , Clément Jailin , Zvonimir Tomičević Coupled systems mechanics, 2023, 12 (6), pp.503-517. ⟨10.12989/csm.2023.12.6.503⟩ Journal articles hal-04367049v1
	Experimental and numerical analyses of the interaction of creep with mesoscale damage in cementitious materials Aliaksandra Tsitova , Fabien Bernachy-Barbe , Benoît Bary , François Hild Mechanics of Materials, 2023, 184, pp.104715. ⟨10.1016/j.mechmat.2023.104715⟩ Journal articles hal-04367138v1
	Estimation of laser-induced damage depth from surface image features Guillaume Hallo , Yanis Abdelmoumni-Prunes , Sylvain Grosjean , Jérôme Néauport , Chloé Lacombe Applied optics, 2023, 62 (11), pp.2720-2726. ⟨10.1364/AO.484277⟩ Journal articles hal-04216084v1
	Proper Generalized Decomposition stereocorrelation to measure kinematic fields for high speed impact on laminated glass Xuyang Chang , Corentin Le Gourriérec , François Hild , Léonard Turpin , Myriam Berny Computer Methods in Applied Mechanics and Engineering, 2023, 415, pp.116217. ⟨10.1016/j.cma.2023.116217⟩ Journal articles hal-04216087v1
	Modal characterization of crack network development in an MgO containing refractory castable Vinicius Fiocco Sciuti , Rafael Vargas , Rodrigo Bresciani Canto , François Hild Journal of Strain Analysis for Engineering Design, 2023, 58 (6), pp.490-500. ⟨10.1177/03093247221141490⟩ Journal articles hal-03956964v1
	Mesoscale DVC analyses and parameter calibration for pantographic block in 3-point flexure Malo Valmalle , Benjamin Smaniotto , Mario Spagnuolo , Alessandro Ciallella , François Hild European Journal of Mechanics - A/Solids, 2023, 101, pp.105063. ⟨10.1016/j.euromechsol.2023.105063⟩ Journal articles hal-04367595v1
	Hybrid infrared-visible multiview correlation to study damage in a woven composite complex-shaped specimen Andrija Zaplatić , Zvonimir Tomičević , Xuyang Chang , Ivica Skozrit , Stéphane Roux Coupled systems mechanics, 2023, 12 (5), pp.445-459. ⟨10.12989/csm.2023.12.5.445⟩ Journal articles hal-04367067v1
	Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Quantification of strain activity and damage growth Ana Vrgoč , Zvonimir Tomičević , Benjamin Smaniotto , François Hild Composites Science and Technology, 2023, 177, pp.104552. ⟨10.1016/j.compscitech.2023.109932⟩ Journal articles hal-03950455v1
	Identification and validation of constitutive parameters of a Hencky-type discrete model via experiments on millimetric pantographic unit cells Michele De Angelo , Nurettin Yilmaz , M. Erden Yildizdag , Anil Misra , François Hild International Journal of Non-Linear Mechanics, 2023, pp.104419. ⟨10.1016/j.ijnonlinmec.2023.104419⟩ Journal articles hal-04079561v1
	Boundary condition effect on the evaluation of stress triaxiality fields Andrija Zaplatić , Ana Vrgoč , Zvonimir Tomičević , François Hild International Journal of Mechanical Sciences, 2023, 246, pp.108127. ⟨10.1016/j.ijmecsci.2023.108127⟩ Journal articles hal-03950471v1
	Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Investigation of notch sensitivity Ana Vrgoč , Zvonimir Tomičević , Benjamin Smaniotto , François Hild Mechanics of Materials, 2023, 177 (9), pp.104552. ⟨10.1016/j.mechmat.2022.104552⟩ Journal articles hal-03916417v1
	Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8 Ante Buljac , Xiang Kong , Lukas Helfen , François Hild , Thilo F. Morgeneyer Mechanics of Materials, 2023, 178, pp.104558. ⟨10.1016/j.mechmat.2023.104558⟩ Journal articles hal-04211215v1
	Optical model-based calibration of gray levels for laser damage size assessment Guillaume Hallo , Chloé Lacombe , Marin Fouchier , Myriam Zerrad , Jérôme Néauport Optics Letters, 2023, 48 (2), pp.481-484. ⟨10.1364/OL.481048⟩ Journal articles hal-03911646v1
	Deformation mode in 3-point flexure on pantographic block Alessandro Ciallella , Gabriele La Valle , Antoine Vintache , Benjamin Smaniotto , François Hild International Journal of Solids and Structures, 2023, 265-266, pp.112129. ⟨10.1016/j.ijsolstr.2023.112129⟩ Journal articles hal-03951335v1
	Identification of microscale fracture models for mortar with in-situ tests Aliaksandra Tsitova , Fabien Bernachy-Barbe , Benoît Bary , Christophe Bourcier , François Hild International Journal of Mechanical Sciences, 2023, 242, pp.107988. ⟨10.1016/j.ijmecsci.2022.107988⟩ Journal articles hal-03881223v1
	A projection-based approach to extend digital volume correlation for 4D spacetime measurements Viktor Kosin , Amélie Fau , Clément Jailin , Benjamin Smaniotto , Thomas Wick Comptes Rendus. Mécanique, 2023, 351, pp.265-280. ⟨10.5802/crmeca.192⟩ Journal articles hal-04079703v1
	Damage evolution in coal under different loading modes using advanced digital volume correlation based on X-ray computed tomography Haizhou Liu , Lingtao Mao , Yang Ju , François Hild Energy, 2023, 275, pp.127447. ⟨10.1016/j.energy.2023.127447⟩ Journal articles hal-04216100v1
	Hierarchically guided in situ nanolaminography for the visualisation of damage nucleation in alloy sheets Mathias Hurst , Lukas Helfen , Thilo Morgeneyer , Heikki Suhonen , Ante Buljac Scientific Reports, 2023, 13 (1), pp.1055. ⟨10.1038/s41598-022-27035-8⟩ Journal articles hal-03950491v1
	Calibration of cohesive parameters for a castable refractory using 4D tomographic data and realistic crack path from in-situ wedge splitting test Rafael Vargas , Rodrigo Bresciani Canto , François Hild , Benjamin Smaniotto Journal of the European Ceramic Society, 2023, 43 (2), pp.676-691. ⟨10.1016/j.jeurceramsoc.2022.09.040⟩ Journal articles hal-03782687v1
	A damage model for granite subjected to quasi-static contact loading H Shariati , M Saadati , K Weddfelt , P.-L Larsson , François Hild International Journal for Numerical and Analytical Methods in Geomechanics, 2022, 46 (2), pp.374-391. ⟨10.1002/nag.3303⟩ Journal articles hal-03494441v1
	Parametric Experimentation to Evaluate Chiral Bars Representative of Granular Motif Nima Nejadsadeghi , François Hild , Anil Misra International Journal of Mechanical Sciences, 2022, 221, pp.107184. ⟨10.1016/j.ijmecsci.2022.107184⟩ Journal articles hal-03594926v1
	Multiscalar DIC Analyses of Granular String Under Stretch Reveal Non-standard Deformation Mechanisms Nima Nejadsadeghi , Michele de Angelo , Anil Misra , François Hild International Journal of Solids and Structures, 2022, 239-240, pp.111402. ⟨10.1016/j.ijsolstr.2021.111402⟩ Journal articles hal-03482296v1
	Insights into a dual-phase steel microstructure using EBSD and image-processing-based workflow Maxime Mollens , Stéphane Roux , François Hild , Adrien Guery Journal of Applied Crystallography, 2022, 55, pp.601-610. ⟨10.1107/s1600576722004265⟩ Journal articles hal-03723417v1
	An algorithm for Structural Health Monitoring by Digital Image Correlation: Proof of concept and case study Jordan Curt , Matteo Capaldo , François Hild , Stéphane Roux Optics and Lasers in Engineering, 2022, 151, pp.106842. ⟨10.1016/j.optlaseng.2021.106842⟩ Journal articles hal-03490633v1
	Assessment of DVC measurement uncertainty on glass fiber reinforced polymers with various fiber architectures Ante Bartulović , Zvonimir Tomičević , Ante Bubalo , François Hild Coupled systems mechanics, 2022, 11 (1), pp.15-32. ⟨10.12989/csm.2022.11.1.015⟩ Journal articles hal-03482354v1
	Damage Quantification via Digital Volume Correlation with Heterogeneous Mechanical Regularization: Application to an In Situ Meso-Flexural Test on Mortar Aliaksandra Tsitova , Fabien Bernachy-Barbe , Benoît Bary , Sirine Al Dandachli , Christophe Bourcier Experimental Mechanics, 2022, 62, pp.333-349. ⟨10.1007/s11340-021-00778-7⟩ Journal articles hal-03358134v1
	Probing Constitutive Models of Bohus Granite with In Situ Spherical Indentation and Digital Volume Correlation H Shariati , A Bouterf , M Saadati , P.-L Larsson , François Hild Rock Mechanics and Rock Engineering, 2022, 55, pp.7369-7386. ⟨10.1007/s00603-022-02991-9⟩ Journal articles hal-03705005v1
	Debonding analysis via digital volume correlation during in-situ pull-out tests on fractal fibers G. Jänicke , A. Vintache , Benjamin Smaniotto , Amélie Fau , I. Farina Composites Part C: Open Access, 2022, 9, pp.100302. ⟨10.1016/j.jcomc.2022.100302⟩ Journal articles hal-03750879v1
	Improvement of the Arcan setup for the investigation of thin sheet behavior under shear loading A Zaplatić , Z Tomičević , D Čakmak , François Hild Experimental Mechanics, 2022, 62, pp.313-332. ⟨10.1007/s11340-021-00762-1⟩ Journal articles hal-03300104v1
	Experimental Verification of 2D Cosserat Chirality with Stretch-Micro-Rotation Coupling in Orthotropic Metamaterials with Granular Motif Ivan Giorgio , François Hild , Emaad Gerami , Francesco Dell'Isola , Anil Misra Mechanics Research Communications, 2022, 126, pp.104020. ⟨10.1016/j.mechrescom.2022.104020⟩ Journal articles hal-03847610v1
	On Mesoscale Strain Fluctuations in Tensile Tests on Additively Manufactured 17-4PH Stainless Steel Mohamed Ali Bouaziz , Joseph Marae Djouda , François Hild Journal of Strain Analysis for Engineering Design, 2022, 57 (8), pp.688-701. ⟨10.1177/03093247211060217⟩ Journal articles hal-03494994v1
	An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging Victor-Manuel Trejo-Navas , Ante Buljac , François Hild , Thilo F. Morgeneyer , Marc Bernacki Journal of Theoretical, Computational and Applied Mechanics, 2022, pp.1-18. ⟨10.46298/jtcam.7501⟩ Journal articles hal-03626799v1
	Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach Mario Spagnuolo , M Erden Yildizdag , Xavier Pinelli , Antonio Cazzani , François Hild Mathematics and Mechanics of Solids, 2022, 27 (6), pp.1011-1031. ⟨10.1177/10812865211052670⟩ Journal articles hal-03494141v1
	2D Numerical Simulation of Auxetic Metamaterials Based on Force and Deformation Consistency Antonina Roth , Georg Ganzenmüller , Florian Gutmann , Puneeth Jakkula , François Hild Materials, 2022, 15 (13), pp.4490. ⟨10.3390/ma15134490⟩ Journal articles hal-03708860v1
	On accounting for speckle extinction via DIC and PCA Rafael Vargas , R B Canto , François Hild , Stéphane Roux Optics and Lasers in Engineering, 2022, 149, pp.106813. ⟨10.1016/j.optlaseng.2021.106813⟩ Journal articles hal-03358220v1
	Cohesive properties of refractory castable at 600°C: Effect of sintering and testing temperature R Vargas , R B Canto , François Hild Journal of the European Ceramic Society, 2022, 42 (14), pp.6733-6749. ⟨10.1016/j.jeurceramsoc.2022.06.070⟩ Journal articles hal-03705439v1
	Identifiability of Ludwik's law parameters depending on the sample geometry via inverse identification procedure Andrija Zaplatić , Zvonimir Tomičević , Damjan Čakmak , François Hild Coupled systems mechanics, 2022, 11 (2), pp.133-149. ⟨10.12989/csm.2022.11.2.133⟩ Journal articles hal-03482356v1
	DVC Analyses to Study Deformation and Damage mechanisms of Teak in Torsion Malo Valmalle , Crépin Hounlonon , Benjamin Smaniotto , Clément Kouchadé , François Hild Comptes Rendus. Mécanique, 2022, 350, pp.85-98. ⟨10.5802/crmeca.107⟩ Journal articles hal-03613282v1
	On elastic anisotropy of 3D printed acrylonitrile butadiene styrene structures Ashraf Kasmi , Joseph Marae Djouda , François Hild Polymer, 2022, 254, pp.125032. ⟨10.1016/j.polymer.2022.125032⟩ Journal articles hal-03723672v1
	Digital Volume Correlation for Large Deformations of Soft Tissues: Pipeline and Proof of Concept for the application to Breast ex vivo Deformations Thomas Lavigne , Arnaud Mazier , Antoine Perney , Stéphane Pierre Alain Bordas , François Hild Journal of the mechanical behavior of biomedical materials, 2022, 136, pp.105490. ⟨10.1016/j.jmbbm.2022.105490⟩ Journal articles hal-03792835v1
	Local-global DVC analyses confirm theoretical predictions for deformation and damage onset in torsion of pantographic metamaterial Malo Valmalle , Antoine Vintache , Benjamin Smaniotto , F. Gutmann , M. Spagnuolo Mechanics of Materials, 2022, 172, pp.104379. ⟨10.1016/j.mechmat.2022.104379⟩ Journal articles hal-03706227v1
	Crack growth measurement and J-integral evaluation of additively manufactured polymer using digital image correlation and FE modeling Mohamed Ali Bouaziz , Joseph Marae Djouda , Marouene Zouaoui , Julien Gardan , François Hild Fatigue and Fracture of Engineering Materials and Structures, 2021, 44, pp.1318-1335. ⟨10.1111/ffe.13431⟩ Journal articles hal-03118861v1
	Multiscale DIC applied to Pantographic Structures François Hild , A. Misra , F. Dell'Isola Experimental Mechanics, 2021, 61, pp.431-443. ⟨10.1007/s11340-020-00636-y⟩ Journal articles hal-02884633v1
	Sub-pixel detection of laser-induced damage and its growth on fused silica optics using registration residuals Guillaume Hallo , Chloé Lacombe , Romain Parreault , Nadja Roquin , Thierry Donval Optics Express, 2021, 29 (22), pp.35820-35836. ⟨10.1364/oe.433862⟩ Journal articles hal-03491141v1
	Fracture Energy Evaluation of Refractories in Wedge Splitting Tests from Notch Opening Displacements R Vargas , R B Canto , François Hild Journal of the European Ceramic Society, 2021, 41 (10), pp.5367-5379. ⟨10.1016/j.jeurceramsoc.2021.02.055⟩ Journal articles hal-03154244v1
	Optimized gauging for tire-rim loading identification K Cosseron , D Mellé , J.-F Diebold , François Hild , Stéphane Roux European Journal of Mechanics - A/Solids, 2021, 87, pp.104192. ⟨10.1016/j.euromechsol.2020.104192⟩ Journal articles hal-03066228v1
	Displacement Uncertainty Quantifications in T3-Stereocorrelation M Berny , T. Archer , P. Beauchêne , A. Mavel , François Hild Experimental Mechanics, 2021, 61, pp.771-790. ⟨10.1007/s11340-021-00690-0⟩ Journal articles hal-03110419v1
	Application of different imaging techniques for the characterization of damage in fiber reinforced polymer Ana Vrgoč , Zvonimir Tomičević , Benjamin Smaniotto , François Hild Composites Part A: Applied Science and Manufacturing, 2021, 150, pp.106576. ⟨10.1016/j.compositesa.2021.106576⟩ Journal articles hal-03300140v1
	Detection and Tracking of Laser Damage Sites on Fused Silica Components by Digital Image Correlation Guillaume Hallo , Chloé Lacombe , Jérôme Néauport , François Hild Optics and Lasers in Engineering, 2021, 146, pp.106674. ⟨10.1016/j.optlaseng.2021.106674⟩ Journal articles hal-03235738v1
	Toward virtual design and optimization of a structural test monitored by a multi-view system Matthieu Vitse , Martin Poncelet , Alaa Eddin Iskef , John-Eric Dufour , Renaud Gras Journal of Strain Analysis for Engineering Design, 2021, 56 (2), pp.112-128. ⟨10.1177/0309324720910887⟩ Journal articles hal-02456755v1
	On the Validation of Homogenized Modeling for Bi-Pantographic Metamaterials via Digital Image Correlation Emilio Barchiesi , Francesco Dell'Isola , François Hild International Journal of Solids and Structures, 2021, 208-209, pp.49-62. ⟨10.1016/j.ijsolstr.2020.09.036⟩ Journal articles hal-02954418v1
	Damage characterization in fiber reinforced polymer via Digital Volume Correlation Ana Vrgoč , Zvonimir Tomičević , Benjamin Smaniotto , François Hild Coupled systems mechanics, 2021, 10 (6), pp.545-560. ⟨10.12989/csm.2021.10.6.545⟩ Journal articles hal-03482350v1
	On the Validation of A Priori Estimates of Standard Displacement Uncertainties in T3-Stereocorrelation C Minguet , F. Soulas , T Lafargue-Tallet , E Chalumeau , M Pommies Measurement Science and Technology, 2021, 32 (2), pp.024004. ⟨10.1088/1361-6501/abafe1⟩ Journal articles hal-02916960v1
	Digital Image Correlation applied to in situ evaluation of surface cracks upon curing of MgO-containing refractory castables V F Sciuti , François Hild , V C Pandolfelli , T Santos , B. Smaniotto Journal of the European Ceramic Society, 2021, 41 (1), pp.1003-1014. ⟨10.1016/j.jeurceramsoc.2020.04.055⟩ Journal articles hal-02555028v1
	Poynting Effects in Pantographic Metamaterial Captured via Multiscale DVC Patrick Auger , Thomas Lavigne , Benjamin Smaniotto , Mario Spagnuolo , Francesco Dell'Isola Journal of Strain Analysis for Engineering Design, 2021, 56 (7), pp.462-477. ⟨10.1177/0309324720976625⟩ Journal articles hal-02974410v1
	On the effect of sintering temperature on the fracture energy of an Alumina-Mullite-Zirconia castable at 600°C R Vargas , X Pinelli , Benjamin Smaniotto , François Hild , R B Canto Journal of the European Ceramic Society, 2021, 41 (7), pp.4406-4418. ⟨10.1016/j.jeurceramsoc.2021.01.023⟩ Journal articles hal-03104704v1
	On the Calibration of Cohesive Parameters for Refractories from Notch Opening Displacements in Wedge Splitting Tests R Vargas , R B Canto , François Hild Journal of the European Ceramic Society, 2021, 41 (14), pp.7348-7361. ⟨10.1016/j.jeurceramsoc.2021.07.011⟩ Journal articles hal-03282215v1
	Damage analysis in glass fiber reinforced epoxy resin via digital image correlation Ana Vrgoč , Zvonimir Tomičević , Andrija Zaplatić , François Hild Transactions of FAMENA, 2021, 45 (2), pp.1-12. ⟨10.21278/TOF.452024020⟩ Journal articles hal-03300109v1
	Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy Gabriele Albertini , Mathias Lebihain , François Hild , Laurent Ponson , David S Kammer Physical Review Letters, 2021, 127 (3), ⟨10.1103/PhysRevLett.127.035501⟩ Journal articles hal-03358024v1
	Pyramidal Adaptive Meshing for Digital Image Correlation Dealing With Cracks V F Sciuti , R Vargas , R B Canto , François Hild Engineering Fracture Mechanics, 2021, 256, pp.107931. ⟨10.1016/j.engfracmech.2021.107931⟩ Journal articles hal-03310448v1
	Mesoscale modeling and experimental analyses for pantographic cells: effect of hinge deformation Mario Spagnuolo , Ugo Andreaus , Anil Misra , Ivan Giorgio , François Hild Mechanics of Materials, 2021, 160, pp.103924. ⟨10.1016/j.mechmat.2021.103924⟩ Journal articles hal-03230384v1
	A modal approach for shape defect measurement based on global stereocorrelation David Etievant , Yann Quinsat , François Thiebaut , François Hild Optics and Lasers in Engineering, 2020, 128, pp.106030. ⟨10.1016/j.optlaseng.2020.106030⟩ Journal articles hal-02440185v1
	Hybrid multiview correlation for measuring and monitoring thermomechanical fatigue test Y. Wang , A. Charbal , J.E. Dufour , François Hild , Stéphane Roux Experimental Mechanics, 2020, 60 (1), pp.13-33. ⟨10.1007/s11340-019-00500-8⟩ Journal articles hal-02061580v1
	Study of frictional effects of granite subjected to quasi-static contact loading Hossein Shariati , Mahdi Saadati , Kenneth Weddfelt , Per-Lennart Larsson , François Hild Lubricants, 2020, 8 (12), pp.106. ⟨10.3390/lubricants8120106⟩ Journal articles hal-03066086v1
	Measuring Acceleration Fields via Regularized Digital Image Correlation Corentin Le Gourriérec , Stéphane Roux , François Hild Advanced Modeling and Simulation in Engineering Sciences, 2020, 7, pp.30. ⟨10.1186/s40323-020-00170-5⟩ Journal articles hal-02884648v1
	On the benefits of correcting brightness and contrast in global digital image correlation: Monitoring cracks during curing and drying of a refractory castable V F Sciuti , R B Canto , J. Neggers , François Hild Optics and Lasers in Engineering, 2020, 136, pp.106316. ⟨10.1016/j.optlaseng.2020.106316⟩ Journal articles hal-02910810v1
	Uniaxial compression test on ceramic green compact with bending consideration using digital image correlation Caiuã Caldeira de Melo , Matheus Furlan , François Hild , Nicolas Schmitt , Rodrigo B. Canto Powder Technology, 2020, 376, pp.136-148. ⟨10.1016/j.powtec.2020.08.002⟩ Journal articles hal-02910819v1
	Stereocorrelation Formalism Considering Brightness and Contrast Effects: Application to Torsional Loadings Ali Charbal , Ismail Soner S Cinoglu , François Hild , Stéphane Roux , Natasha Vermaak Experimental Mechanics, 2020, 60, pp.727-732. ⟨10.1007/s11340-019-00576-2⟩ Journal articles hal-02425134v1
	Global digital image correlation up to very high temperatures with grey level corrections Thibaut Archer , Pierre Beauchene , Cédric Huchette , François Hild Measurement Science and Technology, 2020, 31 (2), pp.024003. ⟨10.1088/1361-6501/ab461e⟩ Journal articles hal-02311432v1
	Displacement uncertainties with multiview correlation schemes François Hild , Stéphane Roux Journal of Strain Analysis for Engineering Design, 2020, 55 (7-8), pp.199-211. ⟨10.1177/0309324720927102⟩ Journal articles hal-02555887v1
	Large in-plane elastic deformations of bi-pantographic fabrics: asymptotic homogenization and experimental validation Emilio Barchiesi , Simon R Eugster , Francesco Dell’isola , François Hild Mathematics and Mechanics of Solids, 2020, 25 (3), pp.739-767. ⟨10.1177/1081286519891228⟩ Journal articles hal-02424569v1
	Optimal digital color image correlation J Curt , M Capaldo , François Hild , Stéphane Roux Optics and Lasers in Engineering, 2020, 127, pp.105896. ⟨10.1016/j.optlaseng.2019.105896⟩ Journal articles hal-02310247v1
	On the identification of cohesive zone model for curved crack in mortar R Vargas , A Tsitova , F. Bernachy-Barbe , B Bary , R B Canto Strain, 2020, 56 (6), pp.e12364. ⟨10.1111/str.12364⟩ Journal articles hal-02555911v1
	Creep behavior identification of an environmental barrier coating using full-field measurements Thibaut Archer , Myriam Berny , Pierre Beauchêne , François Hild Journal of the European Ceramic Society, 2020, 40 (15), pp.5704-5718. ⟨10.1016/j.jeurceramsoc.2020.06.009⟩ Journal articles hal-02783261v1
	Two-dimensional continua capable of large elastic extension in two independent directions: asymptotic homogenization, numerical simulations and experimental evidence E. Barchiesi , F Dell'Isola , François Hild , Pierre Seppecher Mechanics Research Communications, 2020, 103, pp.103466. ⟨10.1016/j.mechrescom.2019.103466⟩ Journal articles hal-02404383v1
	Optimal procedure for the identication of constitutive parameters from experimentally measured displacement fields François Hild , Stéphane Roux International Journal of Solids and Structures, 2020, 184, pp.14-23. ⟨10.1016/j.ijsolstr.2018.11.008⟩ Journal articles hal-01916243v1
	Sub-minute in situ Fracture Test in a Lab CT-scanner Clément Jailin , Amine Bouterf , Rafael Vargas , François Hild , Stéphane Roux Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.413-422. ⟨10.1007/s40192-019-00151-6⟩ Journal articles hal-02189645v1
	Estimation of Elastic Strain by Integrated Image Correlation on Electron Diffraction Patterns Qiwei Shi , Stéphane Roux , Félix Latourte , François Hild Ultramicroscopy, 2019, 199, pp.16-33. ⟨10.1016/j.ultramic.2019.02.001⟩ Journal articles hal-02010262v1
	Advances in Pantographic Structures: Design, Manufacturing, Models, Experiments and Image Analyses Francesco Dell'Isola , Pierre Seppecher , Mario Spagnuolo , Emilio Barchiesi , François Hild Continuum Mechanics and Thermodynamics, 2019, 31 (4), pp.1231-1282. ⟨10.1007/s00161-019-00806-x⟩ Journal articles hal-02156824v1
	Simultaneous Full-Field Multi-Experiment Identification J. Neggers , F. Mathieu , François Hild , Stéphane Roux Mechanics of Materials, 2019, 133, pp.71-84. ⟨10.1016/j.mechmat.2019.03.001⟩ Journal articles hal-02055605v1
	Calibrating TSA with integrated DIC: Application to fatigue cracks Juliette Gamot , Thibaut Lasserre , Louis Richard , Jan Neggers , Nicolas Swiergiel Journal of Strain Analysis for Engineering Design, 2019, 54 (5-6), pp.320-330. ⟨10.1177/0309324719874924⟩ Journal articles hal-02266570v1
	Optimal parameterization of tire-rim interaction for aircraft wheels K Cosseron , D Mellé , François Hild , Stéphane Roux Journal of Aircraft, 2019, 56 (5), pp.2032-2046. ⟨10.2514/1.C035343⟩ Journal articles hal-02150077v1
	Complete Mechanical Regularization Applied to Digital Image and Volume Correlation Arturo Mendoza , Jan Neggers , François Hild , Stéphane Roux Computer Methods in Applied Mechanics and Engineering, 2019, 355, pp.27-43. ⟨10.1016/j.cma.2019.06.005⟩ Journal articles hal-02148780v1
	Calibrating thermoelastic stress analysis with integrated digital image correlation: Application to fatigue cracks Juliette Gamot , Thibaut Lasserre , Louis Richard , Jan Neggers , Nicolas Swiergiel Journal of Strain Analysis for Engineering Design, 2019, 54 (5-6), pp.320--330. ⟨10.1177/0309324719874924⟩ Journal articles hal-03261225v1
	Mechanically regularized FE DIC for heterogeneous materials Robin Naylor , François Hild , C. Fagiano , M. Hirsekorn , Y. Renollet Experimental Mechanics, 2019, 59 (8), pp.1159-1170. ⟨10.1007/s11340-019-00529-9⟩ Journal articles hal-02156727v1
	A comparative study of image segmentation methods for micromechanical simulations of ductile damage Victor-Manuel Trejo-Navas , Ante F Buljac , François Hild , Thilo F. Morgeneyer , Lukas Helfen Computational Materials Science, 2019, 159, pp.43-65. ⟨10.1016/j.commatsci.2018.11.039⟩ Journal articles hal-01950835v1
	On the Inelastic Mechanical Behavior of Granite: Study Based on Quasi-oedometric and Indentation Tests H. Shariati , M. Saadati , A. Bouterf , K. Weddfelt , P.L. Larsson Rock Mechanics and Rock Engineering, 2019, 52, pp.645-657. ⟨10.1007/s00603-018-1646-3⟩ Journal articles hal-01924594v1
	Analysis of a castable refractory using the wedge splitting test and cohesive zone model R Vargas , J. Neggers , R B Canto , J A Rodrigues , François Hild Journal of the European Ceramic Society, 2019, 39 (13), pp.3903-3914. ⟨10.1016/j.jeurceramsoc.2019.03.009⟩ Journal articles hal-02055553v1
	Experimental database of mixed-mode crack propagation tests performed on mortar specimens with a hexapod and full-field measurements. Part II: interactive loading Andreea Carpiuc-Prisacari , Clément Jailin , Martin Poncelet , Kyrylo Kazymyrenko , Hugo Leclerc Cement and Concrete Research, 2019, 125, pp.105867. ⟨10.1016/j.cemconres.2019.105867⟩ Journal articles hal-02273328v1
	Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs Clément Jailin , Ante F Buljac , Amine Bouterf , François Hild , Stéphane Roux Journal of Strain Analysis for Engineering Design, 2019, 54 (1), pp.44-53. ⟨10.1177/0309324718810593⟩ Journal articles hal-01926380v1
	Measurement of kinematic fields via DIC for impact engineering applications François Hild , Amine Bouterf , Stéphane Roux International Journal of Impact Engineering, 2019, 130, pp.163-171. ⟨10.1016/j.ijimpeng.2019.04.007⟩ Journal articles hal-02096299v1
	Crack initiation and propagation under thermal fatigue of austenitic stainless steel Yanjun Wang , Ali Charbal , François Hild , Stéphane Roux , Ludovic Vincent International Journal of Fatigue, 2019, 124, pp.149-166. ⟨10.1016/j.ijfatigue.2019.02.036⟩ Journal articles hal-02049870v1
	Characterizing fracturing of clay-rich Lower Watrous rock: From laboratory experiments to nonlocal damage-based simulations Nicolas Guy , Darius Seyedi , François Hild Rock Mechanics and Rock Engineering, 2018, 51 (6), pp.1777-1787. ⟨10.1007/s00603-018-1432-2⟩ Journal articles hal-01698500v1
	Digital Volume Correlation: Review of Progress and Challenges Ante Buljac , Clément Jailin , Arturo Mendoza , J Neggers , T. Taillandier-Thomas Experimental Mechanics, 2018, 58 (5), pp.661-708. ⟨10.1007/s11340-018-0390-7⟩ Journal articles hal-01744752v1
	Big data in experimental mechanics and model order reduction : today’s challenges and tomorrow’s opportunities Jan Neggers , Olivier Allix , François Hild , Stéphane Roux Archives of Computational Methods in Engineering, 2018, 25 (1), pp.143-164. ⟨10.1007/s11831-017-9234-3⟩ Journal articles hal-03261224v1
	Evaluation of measurement uncertainties of digital volume correlation applied to laminography data Ante F Buljac , Thibault F Taillandier-Thomas , Lukas F Helfen , Thilo F. Morgeneyer , François Hild Journal of Strain Analysis for Engineering Design, 2018, 53, pp.49-65. ⟨10.1177/0309324717748097⟩ Journal articles hal-01674568v1
	Fast 4D tensile test monitored via X-CT: Single projection based Digital Volume Correlation dedicated to slender samples Clément Jailin , Ante Buljac , Amine Bouterf , François Hild , Stephane Roux Journal of Strain Analysis for Engineering Design, 2018, 53 (7), pp.473-484. ⟨10.1177/0309324718797765⟩ Journal articles hal-01847191v1
	Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements Ante Buljac , Lukas Helfen , François Hild , Thilo F. Morgeneyer Engineering Fracture Mechanics, 2018, 192, pp.242-261. ⟨10.1016/j.engfracmech.2018.01.008⟩ Journal articles hal-01710087v1
	Big Data in Experimental Mechanics and Model Order Reduction: Today's Challenges and Tomorrow's Opportunities Jan Neggers , Olivier Allix , François Hild , Stéphane Roux Archives of Computational Methods in Engineering, 2018, 25 (1), pp.143-164. ⟨10.1007/s11831-017-9234-3⟩ Journal articles hal-01636255v1
	Self-calibration for lab-μCT using space-time regularized projection-based DVC and model reduction Clément Jailin , Ante F Buljac , Amine Bouterf , Martin Poncelet , François Hild Measurement Science and Technology, 2018, 29, 024003, 13 p. ⟨10.1088/1361-6501/aa9818⟩ Journal articles hal-01633741v1
	Regularised digital-level corrections for infrared image correlation Ali Charbal , Stéphane Roux , François Hild , Ludovic Vincent Quantitative InfraRed Thermography Journal, 2018, 15 (2), pp.172-193. ⟨10.1080/17686733.2018.1425955⟩ Journal articles hal-01710068v1
	Spatiotemporal regularization for digital image correlation: Application to infrared camera frames Ali Charbal , Stéphane Roux , François Hild , Ludovic Vincent International Journal for Numerical Methods in Engineering, 2018, 114 (12), pp.1331-1349. ⟨10.1002/nme.5788⟩ Journal articles hal-01710075v1
	On the analysis of heat haze effects with spacetime DIC Myriam Berny , Thibaut Archer , Anne Mavel , Pierre Beauchêne , Stéphane Roux Optics and Lasers in Engineering, 2018, 111, pp.135-153. ⟨10.1016/j.optlaseng.2018.06.004⟩ Journal articles hal-01809213v1
	On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage Ante F Buljac , Victor-Manuel Trejo-Navas , Modesar Shakoor , Amine Bouterf , Jan Neggers European Journal of Mechanics - A/Solids, 2018, 72, pp.287-297. ⟨10.1016/j.euromechsol.2018.04.010⟩ Journal articles hal-01767392v1
	Validation of registration techniques applied to XRD signals for stress evaluations in titanium alloys Benoit Voillot , Jean Lou Lebrun , René Billardon , François Hild Experimental Mechanics, 2018, 58 (8), pp.1265-1280. ⟨10.1007/s11340-018-0391-6⟩ Journal articles hal-01744738v1
	On the use of SEM correlative tools for in situ mechanical tests Qiwei Shi , Stéphane Roux , Félix Latourte , François Hild , Dominique Loisnard Ultramicroscopy, 2018, 184, Part A, pp.71-87. ⟨10.1016/j.ultramic.2017.08.005⟩ Journal articles hal-01674581v1
	On deformation and damage micromechanisms in strong work hardening 2198 T3 aluminium alloy Ante Buljac , François Hild , Lukas Helfen , Thilo F. Morgeneyer Acta Materialia, 2018, 149, pp.29-45. ⟨10.1016/j.actamat.2018.01.026⟩ Journal articles hal-01710066v1
	Recent advances in the finite element modelling of ductile fracture at mesoscale Pierre-Olivier Bouchard , Victor-Manuel Trejo-Navas , Modesar Shakoor , Thilo F. Morgeneyer , Ante Buljac Procedia Manufacturing, 2018, 15, pp.39-45. ⟨10.1016/j.promfg.2018.07.167⟩ Journal articles hal-01858266v1
	Mode-enhanced space-time DIC: Applications to ultra high-speed imaging Myriam Berny , Clément Jailin , Amine Bouterf , François Hild , Stephane Roux Measurement Science and Technology, 2018, 29 (12), pp.125008. ⟨10.1088/1361-6501/aae3d5⟩ Journal articles hal-01878095v1
	Enhanced Piola–Hencky discrete models for pantographic sheets with pivots without deformation energy: numerics and experiments Emilio Turco , Anil Misra , Marek Pawlikowski , Francesco Dell 'Isola , François Hild International Journal of Solids and Structures, 2018, 147, pp.94-109. ⟨10.1016/j.ijsolstr.2018.05.015⟩ Journal articles hal-01791894v1
	On the analysis of canvas wrinkling via isogeometric stereocorrelation John-Eric Dufour , Emilie Gonnet , Sébastien Grau , François Hild International Journal of Solids and Structures, 2018, 154, pp.114-123. ⟨10.1016/j.ijsolstr.2017.06.037⟩ Journal articles hal-01674565v1
	Comparison of two full-field identification methods for the wedge splitting test on a refractory R Vargas , J. Neggers , R B Canto , J A Rodrigues , François Hild Journal of the European Ceramic Society, 2018, 38 (16), pp.5569-5579. ⟨10.1016/j.jeurceramsoc.2018.07.039⟩ Journal articles hal-01849282v1
	On the validation of integrated DIC with tapered double cantilever beam tests Thiago Melo Grabois , Jan Neggers , Laurent Ponson , François Hild , Romildo Dias Toledo Filho Engineering Fracture Mechanics, 2018, 191, pp.311-323. ⟨10.1016/j.engfracmech.2017.12.015⟩ Journal articles hal-01674562v1
	Measuring topographies from conventional SEM acquisitions Qiwei Shi , Stéphane Roux , Félix Latourte , François Hild , Dominique Loisnard Ultramicroscopy, 2018, 191, pp.18-33. ⟨10.1016/j.ultramic.2018.04.006⟩ Journal articles hal-01970210v1
	Analysis of compaction in brittle foam with multiscale indentation tests A. Bouterf , E. Maire , Stéphane Roux , François Hild , X. Brajer Mechanics of Materials, 2018, 118, pp.22 - 30. ⟨10.1016/j.mechmat.2017.12.004⟩ Journal articles hal-01674574v1
	On the mechanical behavior of granite material with particular emphasis on the influence from pre-existing cracks and defects M. Saadati , P. Forquin , Kenneth Weddfelt , P. L. L Larsson , François Hild Journal of Testing and Evaluation, 2018, 46 (1), pp.33-45. ⟨10.1520/JTE20160072⟩ Journal articles hal-01674573v1
	Backtracking depth-resolved microstructures for crystal plasticity identification – Part 1: Backtracking microstructures Qiwei Shi , Félix Latourte , François Hild , Stéphane Roux JOM Journal of the Minerals, Metals and Materials Society, 2017, 69 (12), pp.2810-2818. ⟨10.1007/s11837-017-2585-2⟩ Journal articles hal-01674542v1
	Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels Michael Callahan , Olivier Hubert , François Hild , Astrid Perlade , Jean-Hubert Schmitt Materials Science and Engineering: A, 2017, 704, pp.391 - 400. ⟨10.1016/j.msea.2017.08.042⟩ Journal articles hal-01591751v1
	Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging Ante Buljac , Modesar Shakoor , Jan Neggers , Marc Bernacki , Pierre-Olivier Bouchard Computational Mechanics, 2017, 59 (3), pp.419-441. ⟨10.1007/s00466-016-1357-0⟩ Journal articles hal-01480980v1
	Improving full-field identification using progressive model enrichments Jan Neggers , Florent Mathieu , François Hild , Stéphane Roux , Nicolas Swiergiel International Journal of Solids and Structures, 2017, 118, pp.213 - 223. ⟨10.1016/j.ijsolstr.2017.03.013⟩ Journal articles hal-01549237v1
	Comparison between experimental and numerical results of mixed-mode crack propagation in concrete: Influence of boundary conditions choice A. Carpiuc-Prisacari , M. Poncelet , K. Kazymyrenko , François Hild , Hugo Leclerc Cement and Concrete Research, 2017, 100, pp.329--340. ⟨10.1016/j.cemconres.2017.05.003⟩ Journal articles hal-01576722v1
	On the identifiability of the Hill-1948 model with one uniaxial tensile test Morgan Bertin , François Hild , Stéphane Roux Comptes Rendus Mécanique, 2017, 345, pp.363 - 369. ⟨10.1016/j.crme.2017.04.001⟩ Journal articles hal-01549229v1
	On the identifiability of Hill-1948 plasticity model with a single biaxial test on very thin sheet Morgan Bertin , François Hild , Stéphane Roux Strain, 2017, 53 (5), pp.e12233. ⟨10.1111/str.12233⟩ Journal articles hal-01674577v1
	Backtracking Depth-Resolved Microstructures for Crystal Plasticity Identification—Part 2: Identification Qiwei Shi , Félix Latourte , François Hild , Stéphane Roux JOM Journal of the Minerals, Metals and Materials Society, 2017, 69 (12), pp.2803 - 2809. ⟨10.1007/s11837-017-2586-1⟩ Journal articles hal-01674541v1
	Identication of the Crushing Behavior of Brittle Foam: From Indentation to Oedometric Tests Amine Bouterf , Jérôme Adrien , Eric Maire , Xavier Brajer , Francois Hild Journal of the Mechanics and Physics of Solids, 2017, 98, pp.181-200. ⟨10.1016/j.jmps.2016.09.011⟩ Journal articles hal-01383929v1
	Experimental and numerical analysis of thermal striping in automotive brake discs L Augustins , Francois Hild , R Billardon , S Boudevin Fatigue and Fracture of Engineering Materials and Structures, 2017, 40 (2), pp.267-276. ⟨10.1111/ffe.12495⟩ Journal articles hal-01481782v1
	A complex mixed-mode crack propagation test performed with a 6-axis testing machine and full-field measurements propagation A. Carpiuc-Prisacari , M. Poncelet , K. Kazymyrenko , Hugo Leclerc , François Hild Engineering Fracture Mechanics, 2017, 176, pp.1-22. ⟨10.1016/j.engfracmech.2017.01.013⟩ Journal articles hal-01480988v1
	Mesoscale analysis of damage growth in woven composites Aurélien Doitrand , Christian Fagiano , François Hild , Vincent Chiaruttini , Anne Mavel Composites Part A: Applied Science and Manufacturing, 2017, 96, pp.77-88. ⟨10.1016/j.compositesa.2017.02.018⟩ Journal articles hal-01480982v1
	An extension of digital volume correlation for multimodality image registration Erika Tudisco , Clément Jailin , Arturo Mendoza , A Tengattini , E Andò Measurement Science and Technology, 2017, 28 (9), ⟨10.1088/1361-6501/aa7b48⟩ Journal articles hal-01633737v1
	Virtual hybrid test control of sinuous crack Clément Jailin , Andreea Carpiuc , Kyrylo Kazymyrenko , Martin Poncelet , Hugo Leclerc Journal of the Mechanics and Physics of Solids, 2017, 102, pp.239 - 256. ⟨10.1016/j.jmps.2017.03.001⟩ Journal articles hal-01549224v1
	On the choice of boundary conditions for micromechanical simulations based on 3D imaging Modesar Shakoor , Ante Buljac , Jan Neggers , François Hild , Thilo F. Morgeneyer International Journal of Solids and Structures, 2017, 112, pp.83-96. ⟨10.1016/j.ijsolstr.2017.02.018⟩ Journal articles hal-01471645v1
	In situ observation of strained bands and ductile damage in thin AA2139-T3 alloy sheets Ante F Buljac , Thibault F Taillandier-Thomas , Thilo F. Morgeneyer , Lukas F Helfen , Stéphane Roux Procedia IUTAM, 2017, 20, pp.66-72. ⟨10.1016/j.piutam.2017.03.009⟩ Journal articles hal-01518925v1
	On the use of flat-fields for tomographic reconstruction Clément Jailin , Jean-Yves Buffiere , François Hild , Martin Poncelet , Stéphane Roux Journal of Synchrotron Radiation, 2017, 24, ⟨10.1107/S1600577516015812⟩ Journal articles hal-01380003v1
	I-DIC-based identification strategy of failure criteria: application to titanium and nickel-based alloys Dominik Lindner , Olivier Allix , François Hild , Xavier Pinelli , Olivier Paulien-Camy Meccanica, 2016, 51, pp.3149-3165. ⟨10.1007/s11012-016-0555-3⟩ Journal articles hal-01480976v1
	3D surface measurements with isogeometric stereocorrelation: Application to complex shapes John-Eric Dufour , Sylvain Leclercq , Julien Schneider , Stéphane Roux , François Hild Optics and Lasers in Engineering, 2016, 87, pp.146 - 155. ⟨10.1016/j.optlaseng.2016.02.018⟩ Journal articles hal-01383958v1
	Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements Ante Buljac , Thibault Taillandier-Thomas , Thilo F. Morgeneyer , Lukas Helfen , Stéphane Roux International Journal of Fracture, 2016, 200 (1-2), pp.49-62. ⟨10.1007/s10704-015-0052-z⟩ Journal articles hal-01385406v1
	Analysis of wedge splitting test on refractory castable via integrated DIC Rafael Vargas , Jan Neggers , Rodrigo B Canto , J A Rodrigues , François Hild Journal of the European Ceramic Society, 2016, 36, pp.4309 - 4317. ⟨10.1016/j.jeurceramsoc.2016.07.007⟩ Journal articles hal-01383919v1
	Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements Morgan Bertin , François Hild , Stéphane Roux Strain, 2016, 52, pp.307 - 323. ⟨10.1111/str.12178⟩ Journal articles hal-01383975v1
	Toward 4D Mechanical Correlation François Hild , Amine Bouterf , Ludovic Chamoin , Hugo Leclerc , Florent Mathieu Advanced Modeling and Simulation in Engineering Sciences, 2016, 3 (1), pp.1-26. ⟨10.1186/s40323-016-0070-z⟩ Journal articles hal-01310582v2
	On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3) Thilo F. Morgeneyer , Thibault F Taillandier-Thomas , Ante F Buljac , Lukas F Helfen , François Hild Journal of the Mechanics and Physics of Solids, 2016, 96, pp.550-571. ⟨10.1016/j.jmps.2016.07.012⟩ Journal articles hal-01383922v1
	Evaluation of fatigue crack network growth in cast iron for different biaxial loading paths via full-field measurements Zvonimir Tomicevic , Stéphane Roux , François Hild International Journal of Fatigue, 2016, 92, pp.281-303. ⟨10.1016/j.ijfatigue.2016.07.013⟩ Journal articles hal-01383909v1
	Cutting force sensor based on digital image correlation for segmented chip formation analysis Thomas Baizeau , Sébastien Campocasso , Frédéric Rossi , Gérard Poulachon , François Hild Journal of Materials Processing Technology, 2016, 238, pp.466-473. ⟨10.1016/j.jmatprotec.2016.07.016⟩ Journal articles hal-01361336v1
	Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations Adrien Guery , François Hild , Félix Latourte , Stéphane Roux International Journal of Plasticity, 2016, 81, pp.249-266. ⟨10.1016/j.ijplas.2016.01.008⟩ Journal articles hal-01303523v1
	Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identificationeAnalysis of uniaxial tests Zvonimir Tomicevic , Janos Kodvanj , François Hild European Journal of Mechanics - A/Solids, 2016, 59, pp.140-154. ⟨10.1016/j.euromechsol.2016.02.010⟩ Journal articles hal-01303532v1
	Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification: Analysis of biaxial tests Zvonimir Tomicevic , Janos Kodvanj , François Hild European Journal of Mechanics - A/Solids, 2016, 59, pp.195-209. ⟨10.1016/j.euromechsol.2016.03.006⟩ Journal articles hal-01304031v1
	Quaternion correlation for tracking crystal motions Qiwei Shi , Félix Latourte , François Hild , Stéphane Roux Measurement Science and Technology, 2016, 27, pp.95006 - 95006. ⟨10.1088/0957-0233/27/9/095006⟩ Journal articles hal-01383950v1
	A soft route toward 4D tomography Thibault Taillandier-Thomas , Stéphane Roux , François Hild Physical Review Letters, 2016, 117, pp.025501. ⟨10.1103/PhysRevLett.117.025501⟩ Journal articles hal-01383970v1
	Integrated Digital Image Correlation considering gray level and blur variations: Application to distortion measurements of IR camera Ali Charbal , John-Eric Dufour , Adrien Guery , François Hild , Stéphane Roux Optics and Lasers in Engineering, 2016, 78, pp.75-85. ⟨10.1016/j.optlaseng.2015.09.011⟩ Journal articles hal-01303516v1
	Crystal plasticity parameter identification with 3D measurements and Integrated Digital Image Correlation Morgan Bertin , Chaowei Du , Johan P M Hoefnagels , François Hild Acta Materialia, 2016, 116, pp.321 - 331. ⟨10.1016/j.actamat.2016.06.039⟩ Journal articles hal-01383887v1
	Constitutive model for flake graphite cast iron automotive brake discs: induced anisotropic damage model under complex loadings L Augustins , René Billardon , François Hild Continuum Mechanics and Thermodynamics, 2016, 28, pp.1445 - 1460. ⟨10.1007/s00161-015-0487-5⟩ Journal articles hal-01383893v1
	Identification of crystal plasticity parameters using DIC measurements and weighted FEMU Adrien Guery , François Hild , Félix Latourte , Stéphane Roux Mechanics of Materials, 2016, 100, pp.55 - 71. ⟨10.1016/j.mechmat.2016.06.007⟩ Journal articles hal-01383934v1
	Identification method for the mixed mode interlaminar behavior of a composite thermoset using displacement field measurements and load data Jean-Sébastien Affagard , Florent Mathieu , Jean-Mathieu Guimard , François Hild Composites Part A: Applied Science and Manufacturing, 2016, 91, pp.238 - 249. ⟨10.1016/j.compositesa.2016.10.007⟩ Journal articles hal-01387657v1
	Hybrid Stereocorrelation Using Infrared and Visible Light Cameras A Charbal , John-Eric Dufour , François Hild , M Poncelet , Ludovic Vincent Experimental Mechanics, 2016, 56 (5), pp.845-860. ⟨10.1007/s11340-016-0127-4⟩ Journal articles hal-01335740v1
	Integrated digital image correlation applied to elasto-plastic identification in a biaxial experiment Morgan Bertin , Francois Hild , Stéphane Roux , Florent Mathieu , Hugo Leclerc Journal of Strain Analysis for Engineering Design, 2016, 51 (2), pp.118-131. ⟨10.1177/0309324715614759⟩ Journal articles hal-01303519v1
	Constitutive model for flake graphite cast iron automotive brake disks: From macroscopic multiscale models to a 1D rheological description L Augustins , René R Billardon , François Hild Continuum Mechanics and Thermodynamics, 2016, 28, pp.1009-1025. ⟨10.1007/s00161-015-0448-z⟩ Journal articles hal-01383890v1
	Failure Mechanisms of Plasterboard in Nail Pull Test Determined by X-ray Microtomography and Digital Volume Correlation Amine Bouterf , Jérôme Adrien , Eric Maire , Xavier Brajer , François Hild Experimental Mechanics, 2016, 56, pp.1427 - 1437. ⟨10.1007/s11340-016-0168-8⟩ Journal articles hal-01383905v1
	Characterization of temperature and strain fields during cyclic laser shocks Ali Charbal , Ludovic Vincent , François Hild , Martin Poncelet , John-Eric Dufour Quantitative InfraRed Thermography Journal, 2016, 13 (1), pp.1-18. ⟨10.1080/17686733.2015.1077544⟩ Journal articles hal-01335735v1
	Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results Lorène Dubreuil , John-Eric Dufour , Yann Quinsat , François Hild Experimental Mechanics, 2016, 56, pp.1231-1242. ⟨10.1007/s11340-016-0158-x⟩ Journal articles hal-01310297v1
	Projection Savings in CT-based Digital Volume Correlation Hugo Leclerc , Stéphane Roux , François Hild Experimental Mechanics, 2015, 55 (1), pp.275-287. ⟨10.1007/s11340-014-9871-5⟩ Journal articles hal-01166750v1
	Identification of a set of macroscopic elastic parameters in a 3D woven composite: Uncertainty analysis and regularization R Gras , H Leclerc , F Hild , Stéphane Roux , Julien Schneider International Journal of Solids and Structures, 2015, 55, pp.2-16. ⟨10.1016/j.ijsolstr.2013.12.023⟩ Journal articles hal-01166765v1
	Characterization of temperature and strain fields during cyclic laser shocks Ali Charbal , Ludovic Vincent , François Hild , Martin Poncelet , John-Eric Dufour Quantitative InfraRed Thermography Journal, 2015, 13 (1), pp.1-18. ⟨10.1080/17686733.2015.1077544⟩ Journal articles hal-01303513v1
	Damage Measurements via DIC François Hild , Amine Bouterf , Stéphane Roux International Journal of Fracture, 2015, IJF at 50, 191 (1-2), pp.77-105. ⟨10.1007/s10704-015-0004-7⟩ Journal articles hal-01166736v1
	Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC Florent Mathieu , Hugo Leclerc , François Hild , Stéphane Roux Experimental Mechanics, 2015, 55 (1), pp.105-119. ⟨10.1007/s11340-014-9888-9⟩ Journal articles hal-01166755v1
	On characteristic parameters involved in dynamic fragmentation processes François Hild Mechanics of Materials, 2015, 80B, pp.340-350. ⟨10.1016/j.mechmat.2013.11.012⟩ Journal articles hal-01167018v1
	CAD-based displacement measurements with stereo-DIC John-Eric Dufour , Benoît Beaubier , François Hild , Stéphane Roux Experimental Mechanics, 2015, 55 (9), pp.1657-1668. ⟨10.1007/s11340-015-0065-6⟩ Journal articles hal-01198947v1
	DIC identification and X-FEM simulation of fatigue crack growth based on the Williams’ series C. Roux-Langlois , A. Gravouil , M.-C. Baietto , Julien Réthoré , F. Mathieu International Journal of Solids and Structures, 2015, 53, pp.38-47. ⟨10.1016/j.ijsolstr.2014.10.026⟩ Journal articles hal-01710062v1
	Damage law identification from full field displacement measurement: Application to four-point bending test for plasterboard Amine Bouterf , Stéphane Roux , François Hild , Guillaume Vivier , Xavier Brajer European Journal of Mechanics - A/Solids, 2015, 49, pp.60-66. ⟨10.1016/j.euromechsol.2014.06.001⟩ Journal articles hal-01068546v1
	On the Evaluation of Stress Triaxiality Fields in a Notched Titanium Alloy Sample via Integrated DIC Dominik Lindner , Florent Mathieu , François Hild , Olivier Allix , Cuong Ha Minh Journal of Applied Mechanics, 2015, 82 (7), pp.4030457. ⟨10.1115/1.4030457⟩ Journal articles hal-01166848v1
	Structural and Photoluminescence Properties of Evaporated SnO2 Thin Films Doped with Rare Earths F. Hild , L. Eichenberger , A. Bouché , X. Devaux , Mathieu Stoffel Energy Procedia, 2015, 84 (23), pp.141-148. ⟨10.1016/j.egypro.2015.12.307⟩ Journal articles hal-02960906v1
	Surface crack network detection on MgO-based refractory castable by digital image correlation R G M Saracura , R B Canto , V C Pandolfelli , N. Schmitt , François Hild China's Refractories, 2015, 24 (1), pp.32-37 Journal articles hal-01710044v1
	A numerical study of the influence from pre-existing cracks on granite rock fragmentation at percussive drilling Mahdi Saadati , Pascal Forquin , Kenneth Weddfelt , Per-Lennart Larsson , François Hild International Journal for Numerical and Analytical Methods in Geomechanics, 2015, 39 (5), pp.558-570. ⟨10.1002/nag.2331⟩ Journal articles hal-01710049v1
	Recent Advances and Perspectives in Digital Image Correlation M. A Sutton , François Hild Experimental Mechanics, 2015, 55 (1), pp.1 - 8. ⟨10.1007/s11340-015-9991-6⟩ Journal articles hal-01709487v1
	Shape, displacement and mechanical properties from isogeometric multiview stereocorrelation John-Eric Dufour , François Hild , Stéphane Roux The Journal of Strain Analysis for Engineering Design, 2015, 50 (7), pp.470-487. ⟨10.1177/0309324715592530⟩ Journal articles hal-01198921v1
	Analysis of Asymmetrical Creep of a Ceramic at 1350°C by Digital Image Correlation Paul Leplay , Olivier Lafforgue , François Hild Journal of the American Ceramic Society, 2015, 98 (7), pp.2240-2247. ⟨10.1111/jace.13601⟩ Journal articles hal-01218666v1
	Time-resolved integrated digital image correlation J. Neggers , J. P. M. Hoefnagels , M. G. D. Geers , F. Hild , Stéphane Roux International Journal for Numerical Methods in Engineering, 2015, 103 (3), pp.157-182. ⟨10.1002/nme.4882⟩ Journal articles hal-01218659v1
	Controlling Stress Intensity Factor Histories with Digital Images Xavier Fayolle , François Hild Experimental Mechanics, 2014, 54 (2), pp.305-314. ⟨10.1007/s11340-013-9790-x⟩ Journal articles hal-00947480v1
	Granite rock fragmentation at percussive drilling - experimental and numerical investigation Mahdi Saadati , Pascal Forquin , Ken Weddfelt , Per-Lennart Larsson , François Hild International Journal for Numerical and Analytical Methods in Geomechanics, 2014, 38 (8), pp.828-843. ⟨10.1002/nag.2235⟩ Journal articles hal-01003490v1
	Eﬃcient binary tomographic reconstruction Stéphane Roux , Hugo Leclerc , François Hild Journal of Mathematical Imaging and Vision, 2014, 49 (2), pp.335-351. ⟨10.1007/s10851-013-0465-0⟩ Journal articles hal-01003479v1
	In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet Thilo F. Morgeneyer , Thibault Taillandier-Thomas , Lukas Helfen , Tilo Baumbach , Ian Sinclair Acta Materialia, 2014, 69, pp.78-91. ⟨10.1016/j.actamat.2014.01.033⟩ Journal articles hal-00952176v1
	CAD-Based Calibration and Shape Measurement with StereoDIC Principle and Application on Test and Industrial Parts Benoît Beaubier , John-Eric Dufour , François Hild , Stéphane Roux , Sylvain Lavernhe Experimental Mechanics, 2014, 54 (3), pp.329-341. ⟨10.1007/s11340-013-9794-6⟩ Journal articles hal-00974363v1
	Experimental analysis of masonry infilled frames using digital image correlation Néstor Guerrero , Manuel Martinez , Ricardo Picon , Maria Eugenia Marante , François Hild Materials and structures, 2014, 47 (5), pp.873-884. ⟨10.1617/s11527-013-0099-0⟩ Journal articles hal-00974365v1
	Integrated Digital Image Correlation for the Evaluation and Correction of Optical Distortions John-Eric Dufour , François Hild , Stéphane Roux Optics and Lasers in Engineering, 2014, 56, pp.121-133. ⟨10.1016/j.optlaseng.2013.12.015⟩ Journal articles hal-00947401v1
	Digital volume correlation applied to X-ray tomography images from spherical indentation tests on lightweight gypsum Amine Bouterf , Stéphane Roux , François Hild , Jérôme Adrien , Eric Maire Strain, 2014, 50 (5), pp.444-453. ⟨10.1111/str.12101⟩ Journal articles hal-01068402v1
	Direct Stress-Strain Measurements from Bulged Membranes Using Topography Image Correlation Jan Neggers , Johan Hoenagels , François Hild , Stéphane Roux , Marc Geers Experimental Mechanics, 2014, 54 (5), pp.717-727 Journal articles hal-01003511v1
	Characterization of SEM speckle pattern marking and imaging distortion by Digital Image Correlation Adrien Guery , Félix Latourte , François Hild , Stéphane Roux Measurement Science and Technology, 2014, 25 (1), pp.015401. ⟨10.1088/0957-0233/25/1/015401⟩ Journal articles hal-00947399v1
	Localized strain ﬁeld measurement on laminography data with mechanical regularization Thibault Taillandier-Thomas , Stéphane Roux , Thilo F. Morgeneyer , François Hild Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014, 324, pp.70-79. ⟨10.1016/j.nimb.2013.09.033⟩ Journal articles hal-00956440v1
	Identification of interlaminar fracture properties of a composite laminate using local full-field kinematic measurements and finite element simulations Florent Mathieu , Patrick Aimedieu , Jean-Mathieu Guimard , François Hild Composites Part A: Applied Science and Manufacturing, 2013, 49, pp.203-213. ⟨10.1016/j.compositesa.2013.02.015⟩ Journal articles hal-00848724v1
	Computation of full-field displacements in a scaffold implant using Digital Volume Correlation and Finite Element Analysis Kamel Madi , Gianluca Tozzi , Qinghang Zhang , Jie Jong , Andrew Cossey Medical Engineering & Physics, 2013, 35 (9), pp.1298-1312. ⟨10.1016/j.medengphy.2013.02.001⟩ Journal articles hal-00947398v1
	Deformation modes of nanostructured thin film under controlled biaxial deformation Soundes Djaziri , Damien Faurie , Éric Le Bourhis , Philippe Goudeau , Pierre-Olivier Renault Thin Solid Films, 2013, 530, pp.30-34. ⟨10.1016/j.tsf.2012.05.051⟩ Journal articles hal-00947392v1
	Addendum to: Assessment of Digital Image Correlation Measurement Errors: Methodology and Results [Experimental Mechanics 49(3)] Michel Bornert , Fabrice Brémand , Pascal Doumalin , Jean-Christophe Dupré , Marina Fazzini Experimental Mechanics, 2013, page 1. ⟨10.1007/s11340-012-9704-3⟩ Journal articles hal-01133567v1
	Experimental analysis and mathematical modeling of fracture in RC elements with any aspect ratio Maria Elena Perdomo , Ricardo Picon , Maria Eugenia Marante , François Hild , Stéphane Roux Engineering Structures, 2013, 46, pp.407-416. ⟨10.1016/j.engstruct.2012.07.005⟩ Journal articles hal-00733122v1
	Image-based identification procedure of a crack propagation law Florent Mathieu , François Hild , Stéphane Roux Engineering Fracture Mechanics, 2013, 103, pp.48-59 Journal articles hal-00848725v1
	3D Digital Volume Correlation of Synchrotron Radiation Laminography images of ductile crack initiation: An initial feasibility study Thilo F. Morgeneyer , Lukas Helfen , Hazem Mubarak , François Hild Experimental Mechanics, 2013, 53, pp.543-556. ⟨10.1007/s11340-012-9660-y⟩ Journal articles hal-00848726v1
	Mechanics-Aided Digital Image Correlation Zvonimir Tomicevic , François Hild , Stéphane Roux Journal of Strain Analysis for Engineering Design, 2013, 48, pp.330-343. ⟨10.1177/0309324713482457⟩ Journal articles hal-00848729v1
	Analysis of necking in high speed experiments by stereocorrelation Gilles Besnard , François Hild , Jean-Michel Lagrange , Philippe Martinuzzi , Stéphane Roux International Journal of Impact Engineering, 2012, 49, pp.179-191. ⟨10.1016/j.ijimpeng.2012.03.005⟩ Journal articles hal-00722694v1
	Digital volume correlation: what are the limits to the spatial resolution? Hugo Leclerc , Jean-Noël Périé , François Hild , Stéphane Roux Mechanics & Industry, 2012, 13, pp.361-371. ⟨10.1051/meca/2012025⟩ Journal articles hal-00848721v1
	A probabilistic nonlocal model for crack initiation and propagation in heterogeneous brittle materials Nicolas Guy , Darius Seyedi , François Hild International Journal for Numerical Methods in Engineering, 2012, 90 (8), pp.1053-1072. ⟨10.1002/nme.3362⟩ Journal articles hal-00694320v1
	Utilisation de l'imagerie IR pour l'étude de la fatigue des aciers : Premières observations d'effets de surface Martin Poncelet , Cédric Doudard , Sylvain Calloch , François Hild , Bastien Weber Instrumentation, Mesure, Métrologie, 2012, 12 (1-2), pp.107-129. ⟨10.3166/i2m.12.1-2.107-129⟩ Journal articles hal-00750767v1
	A global digital image correlation enhanced full-field bulge test method F Hild , Stéphane Roux , Marc G. D. Geers , Jan Neggers , Johan P. M. Hoefnagels Procedia IUTAM, 2012, 4, pp.73--81. ⟨10.1016/j.piutam.2012.05.009⟩ Journal articles hal-03261189v1
	Identification of In Situ Frictional Properties of Bolted Assemblies with Digital Image Correlation Jordan de Crevoisier , Nicolas Swiergiel , Laurent Champaney , François Hild Experimental Mechanics, 2012, 52 (6), pp.561-572. ⟨10.1007/s11340-011-9518-8⟩ Journal articles hal-00713446v1
	" Radioscopies " d'une fissure de fatigue François Hild , Stéphane Roux , Marie-Christine Baietto , Alain Combescure , Anthony Gravouil Instrumentation, Mesure, Métrologie, 2012, 12 (1-2), pp.131-152. ⟨10.3166/I2M.12.1-2.131-152⟩ Journal articles hal-00713478v1
	Analysis of image series through global digital image correlation Gilles Besnard , Hugo Leclerc , François Hild , Stéphane Roux , Nicolas Swiergiel Journal of Strain Analysis for Engineering Design, 2012, 47 (4), pp.214-288. ⟨10.1177/0309324712441435⟩ Journal articles hal-00694332v1
	Identification of a crack propagation law by digital image correlation Florent Mathieu , François Hild , Stéphane Roux International Journal of Fatigue, 2012, 36, pp.146-154. ⟨10.1016/j.ijfatigue.2011.08.004⟩ Journal articles hal-00694317v1
	Volume changes in a filled elastomer studied via digital image correlation Jordan de Crevoisier , Gilles Besnard , Yannick Merckel , Huan Zhang , Julien Caillard Polymer Testing, 2012, 31, p. 663-670. ⟨10.1016/j.polymertesting.2012.04.003⟩ Journal articles hal-00749122v1
	Three-dimensional Analysis of Fatigue Crack Propagation using X-Ray Tomography, Digital Volume Correlation and Extended Finite Element Simulations Julien Réthoré , N. Limodin , Jean-Yves Buffiere , Stéphane Roux , François Hild Procedia IUTAM, 2012, 4, pp.151-158. ⟨10.1016/j.piutam.2012.05.017⟩ Journal articles hal-00717486v1
	Comparison of local and global approaches to digital image correlation François Hild , Stéphane Roux Experimental Mechanics, 2012, 52 (9), pp.1503-1519. ⟨10.1007/s11340-012-9603-7⟩ Journal articles hal-00750756v1
	Optimal and noise-robust extraction of Fracture Mechanics parameters from kinematic measurements Julien Réthoré , Stéphane Roux , François Hild Engineering Fracture Mechanics, 2011, 78, pp.1827-1845. ⟨10.1016/j.engfracmech.2011.01.012⟩ Journal articles hal-00614886v1
	3D X-ray Microtomography Volume Correlation to Study Fatigue Crack Growth N. Limodin , Julien Réthoré , Jean-Yves Buffiere , François Hild , Wolfgang Ludwig Advanced Engineering Materials, 2011, 13 (3), pp.186-193. ⟨10.1002/adem.201000235⟩ Journal articles hal-00818812v1
	Fatigue microcrack detection with digital image correlation Jérémie Rupil , Stéphane Roux , François Hild , Ludovic Vincent The Journal of Strain Analysis for Engineering Design, 2011, 46 (6), pp.492-509. ⟨10.1177/0309324711402764⟩ Journal articles hal-00615472v1
	Analysis and artifact correction for volume correlation measurements using tomographic images from a laboratory X-ray source Nathalie Limodin , Julien Réthoré , Jérôme Adrien , Jean-Yves Buffiere , François Hild Experimental Mechanics, 2011, 51 (6), pp.959-970. ⟨10.1007/s11340-010-9397-4⟩ Journal articles hal-00521190v1
	Voxel-Scale Digital Volume Correlation Hugo Leclerc , Jean-Noël Périé , Stéphane Roux , François Hild Experimental Mechanics, 2011, 51 (4), pp.479-490. ⟨10.1007/s11340-010-9407-6⟩ Journal articles hal-00521193v1
	Three-dimensional analysis of a tensile test on a propellant with digital volume correlation François Hild , Alain Fanget , Jérôme Adrien , Eric Maire , Stéphane Roux Archives of Mechanics, 2011, 63 (5-6), pp.1-20 Journal articles hal-00634714v1
	Advanced Imaging Methods Michael A. Sutton , François Hild , Helena Jin , Xia Li , Michel Grediac Experimental Mechanics, 2011, 51 (4), pp.401-403. ⟨10.1007/s11340-011-9469-0⟩ Journal articles hal-02345111v1
	A space-time approach in digital image correlation: Movie-DIC Gilles Besnard , Sandra Guérard , Stéphane Roux , François Hild Optics and Lasers in Engineering, 2011, 49, pp.71-81. ⟨10.1016/j.optlaseng.2010.08.012⟩ Journal articles hal-00521203v1
	On the stored and dissipated energies in heterogeneous rate-independent materials. Application to a quasi-brittle energetic material under tensile loading. Guillaume Vivier , Hervé Trumel , François Hild Continuum Mechanics and Thermodynamics, 2011, 23, pp.387-407. ⟨10.1007/s00161-011-0185-x⟩ Journal articles hal-00624444v1
	On the analysis of notched concrete beams: From measurement with Digital Image Correlation to identification with Boundary Element Method of a cohesive model Manuel D.C. Ferreira , Wilson Venturini , François Hild Engineering Fracture Mechanics, 2011, 78, pp.71-84. ⟨10.1016/j.engfracmech.2010.10.008⟩ Journal articles hal-00614875v1
	On the Identification and Validation of an Anisotropic Damage Model Using Full-field Measurements Mouldi Ben Azzouna , Jean-Noël Périé , Jean-Mathieu Guimard , François Hild , Stéphane Roux International Journal of Damage Mechanics, 2011, 20, pp.1130-1150. ⟨10.1177/1056789510395555⟩ Journal articles hal-00947496v1
	Identification and probabilistic modeling of mesocrack initiations in 304L stainless steel Jérémie Rupil , Ludovic Vincent , Stéphane Roux , François Hild International Journal for Multiscale Computational Engineering, 2011, 9 (4), pp.445-458 Journal articles hal-00614889v1
	A critical local energy release rate criterion for fatigue fracture of elastomers Samy Mzabi , Daniel Berghezan , Stéphane Roux , François Hild , Costantino Creton Journal of Polymer Science Part B: Polymer Physics, 2011, 49 (21), pp.1518-1524. ⟨10.1002/polb.22338⟩ Journal articles hal-02345098v1
	Calibration of constitutive models of steel beams subject to local buckling by using Digital Image Correlation François Hild , Stéphane Roux , Néstor Guerrero , Maria Eugenia Marante , Julio Florez-Lopez European Journal of Mechanics - A/Solids, 2011, 30 (1), pp.1-10. ⟨10.1016/j.euromechsol.2010.09.007⟩ Journal articles hal-00521187v1
	Digital volume correlation analyses of synchrotron tomographic images Julien Réthoré , Nathalie Limodin ,

François Hild

Publications

Determination of interfacial fracture energy of an environmental barrier coating on ceramic matrix composite substrate

Brightness and Contrast Corrections for Space-Time Stereocorrelation via Proper Generalized Decomposition

Damage quantification in concrete under uniaxial compression using microcomputed tomography and digital volume correlation with consideration of heterogeneity

Fracture mechanisms of an environmental barrier coating under thermomechanical loadings

Quantifying 3D Crack Propagation in Nodular Graphite Cast Iron Using Advanced Digital Volume Correlation and X-ray Computed Tomography

A 3D pantographic metamaterial behaving as a mechanical shield: Experimental and numerical evidence

Tensile deformation and failure of AlSi10Mg random cellular metamaterials

Parameter identification of a phase-field fracture model using integrated digital image correlation

Damage detection and quantification via multiview DIC at varying scales

Employing Williams' series for the identification of fracture mechanics parameters from phase-field simulations

Investigation Into Debonding of Single Polypropylene Fiber Pullout in Concrete Using X-Ray Microtomography and Mechanically Regularized Digital Volume Correlation

Link between b.c.c.–f.c.c. orientation relationship and austenite morphology in CF8M stainless steel

Digital image correlation analyses of masonry infilled frame: Uncertainty-based mesh refinement and damage quantification

Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C

Brightness and contrast corrections for stereocorrelation: Global and instantaneous formulation with spatial regularization

Mechanical identification with the reconditioned equilibrium gap method: Formulation, analysis and comparisons

Damage Detection in a Polymer Matrix Composite from 4D Displacement Field Measurements

Multiscale Damage Analyses of Red Sandstone in Uniaxial Compression Based on Advanced Digital Volume Correlation

4D full-field measurements over the entire loading history: Evaluation of different temporal interpolations

Experimental and numerical analyses of the interaction of creep with mesoscale damage in cementitious materials

Estimation of laser-induced damage depth from surface image features

Proper Generalized Decomposition stereocorrelation to measure kinematic fields for high speed impact on laminated glass

Modal characterization of crack network development in an MgO containing refractory castable

Mesoscale DVC analyses and parameter calibration for pantographic block in 3-point flexure

Hybrid infrared-visible multiview correlation to study damage in a woven composite complex-shaped specimen

Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Quantification of strain activity and damage growth

Identification and validation of constitutive parameters of a Hencky-type discrete model via experiments on millimetric pantographic unit cells

Boundary condition effect on the evaluation of stress triaxiality fields

Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Investigation of notch sensitivity

Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8

Optical model-based calibration of gray levels for laser damage size assessment

Deformation mode in 3-point flexure on pantographic block

Identification of microscale fracture models for mortar with in-situ tests

A projection-based approach to extend digital volume correlation for 4D spacetime measurements

Damage evolution in coal under different loading modes using advanced digital volume correlation based on X-ray computed tomography

Hierarchically guided in situ nanolaminography for the visualisation of damage nucleation in alloy sheets

Calibration of cohesive parameters for a castable refractory using 4D tomographic data and realistic crack path from in-situ wedge splitting test

A damage model for granite subjected to quasi-static contact loading

Parametric Experimentation to Evaluate Chiral Bars Representative of Granular Motif

Multiscalar DIC Analyses of Granular String Under Stretch Reveal Non-standard Deformation Mechanisms

Insights into a dual-phase steel microstructure using EBSD and image-processing-based workflow

An algorithm for Structural Health Monitoring by Digital Image Correlation: Proof of concept and case study

Assessment of DVC measurement uncertainty on glass fiber reinforced polymers with various fiber architectures

Damage Quantification via Digital Volume Correlation with Heterogeneous Mechanical Regularization: Application to an In Situ Meso-Flexural Test on Mortar

Probing Constitutive Models of Bohus Granite with In Situ Spherical Indentation and Digital Volume Correlation

Debonding analysis via digital volume correlation during in-situ pull-out tests on fractal fibers

Improvement of the Arcan setup for the investigation of thin sheet behavior under shear loading

Experimental Verification of 2D Cosserat Chirality with Stretch-Micro-Rotation Coupling in Orthotropic Metamaterials with Granular Motif

On Mesoscale Strain Fluctuations in Tensile Tests on Additively Manufactured 17-4PH Stainless Steel

An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging

Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach

2D Numerical Simulation of Auxetic Metamaterials Based on Force and Deformation Consistency

On accounting for speckle extinction via DIC and PCA

Cohesive properties of refractory castable at 600°C: Effect of sintering and testing temperature

Identifiability of Ludwik's law parameters depending on the sample geometry via inverse identification procedure

DVC Analyses to Study Deformation and Damage mechanisms of Teak in Torsion

On elastic anisotropy of 3D printed acrylonitrile butadiene styrene structures

Digital Volume Correlation for Large Deformations of Soft Tissues: Pipeline and Proof of Concept for the application to Breast ex vivo Deformations

Local-global DVC analyses confirm theoretical predictions for deformation and damage onset in torsion of pantographic metamaterial

Crack growth measurement and J-integral evaluation of additively manufactured polymer using digital image correlation and FE modeling

Multiscale DIC applied to Pantographic Structures

Sub-pixel detection of laser-induced damage and its growth on fused silica optics using registration residuals

Fracture Energy Evaluation of Refractories in Wedge Splitting Tests from Notch Opening Displacements

Optimized gauging for tire-rim loading identification

Displacement Uncertainty Quantifications in T3-Stereocorrelation

Application of different imaging techniques for the characterization of damage in fiber reinforced polymer

Detection and Tracking of Laser Damage Sites on Fused Silica Components by Digital Image Correlation

Toward virtual design and optimization of a structural test monitored by a multi-view system

On the Validation of Homogenized Modeling for Bi-Pantographic Metamaterials via Digital Image Correlation

Damage characterization in fiber reinforced polymer via Digital Volume Correlation

On the Validation of A Priori Estimates of Standard Displacement Uncertainties in T3-Stereocorrelation

Digital Image Correlation applied to in situ evaluation of surface cracks upon curing of MgO-containing refractory castables

Poynting Effects in Pantographic Metamaterial Captured via Multiscale DVC

On the effect of sintering temperature on the fracture energy of an Alumina-Mullite-Zirconia castable at 600°C

On the Calibration of Cohesive Parameters for Refractories from Notch Opening Displacements in Wedge Splitting Tests

Damage analysis in glass fiber reinforced epoxy resin via digital image correlation

Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy

Pyramidal Adaptive Meshing for Digital Image Correlation Dealing With Cracks