François Villeneuve

167
Documents

Publications

Publications

Thermal characterization of vertical interface by scanning photothermal radiometry

Alejandro Mateos-Canseco , Andrzej Kusiak , Jean-Luc Battaglia , Matthieu Museau , François Villeneuve
Review of Scientific Instruments, 2024, 95 (10), ⟨10.1063/5.0225690⟩
Article dans une revue hal-04847823 v1

Design methodology of functionally graded cellular materials: Manipulating design parameters of triply periodic minimal surfaces through three-dimensional density distributions

Emilio Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Jorge Amaya et al.
Computer-Aided Design, 2024, 177, pp.103778. ⟨10.1016/j.cad.2024.103778⟩
Article dans une revue hal-04668915 v1

Effective elastic and strength properties of triply periodic minimal surfaces lattice structures by numerical homogenization

Emilio Ramírez , Nicolas Béraud , Marco Montemurro , Franck Pourroy , François Villeneuve
Mechanics of Advanced Materials and Structures, 2023, pp.1-13. ⟨10.1080/15376494.2023.2277846⟩
Article dans une revue hal-04276930 v1

A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis

António José Festas , Daniel Amaral Figueiredo , Sílvia Ribeiro Carvalho , Thang Hoang Vo , Pierre-Thomas Doutre et al.
International Journal of Advanced Manufacturing Technology, 2023, ⟨10.1007/s00170-023-12621-5⟩
Article dans une revue hal-04276974 v1

Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process

Yann Ledoux , Soukaina Ghaoui , Alex Ballu , Christelle Grandvallet , François Villeneuve et al.
International Journal of Advanced Manufacturing Technology, 2023, ⟨10.1007/s00170-023-11142-5⟩
Article dans une revue hal-04098971 v1
Image document

Qualify a NIR camera to detect thermal deviation during aluminum WAAM

Anthony Dellarre , Nicolas Béraud , Nicolas Tardif , Frédéric Vignat , François Villeneuve et al.
International Journal of Advanced Manufacturing Technology, 2023, 127, pp.625-634. ⟨10.1007/s00170-023-11587-8⟩
Article dans une revue hal-04098997 v1

Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling

Akram Chergui , François Villeneuve , Nicolas Béraud , Frédéric Vignat
International Journal on Interactive Design and Manufacturing, 2022, ⟨10.1007/s12008-021-00824-7⟩
Article dans une revue hal-03517111 v1

Geometrical defect analysis of overhang geometry produced by electron beam melting: experimental and statistical investigations

Yann Ledoux , Soukaina Ghaoui , Thanh Hoang Vo , Alex Ballu , François Villeneuve et al.
International Journal of Advanced Manufacturing Technology, 2022, ⟨10.1007/s00170-022-10040-6⟩
Article dans une revue hal-03767332 v1
Image document

An indicator of porosity through simulation of melt pool volume in aluminum wire arc additive manufacturing

Nicolas Béraud , Akram Chergui , Maxime Limousin , François Villeneuve , Frédéric Vignat
Mechanics & Industry, 2022, 23, pp.1. ⟨10.1051/meca/2021052⟩
Article dans une revue hal-03538276 v1

Creation of lattice structures with skeleton model for additive manufacturing

Abdul Hadi Azman , Frédéric Vignat , François Villeneuve , Dinh Son Nguyen
International Journal on Interactive Design and Manufacturing, 2021, ⟨10.1007/s12008-021-00767-z⟩
Article dans une revue hal-03182839 v1
Image document

Analysis of geometrical defects in overhang fabrications in electron beam melting based on thermomechanical simulations and experimental validations

Soukaina Ghaoui , Yann Ledoux , Frédéric Vignat , Matthieu Museau , Thanh Hoang Vo et al.
Additive Manufacturing, 2020, 36, pp.101557. ⟨10.1016/j.addma.2020.101557⟩
Article dans une revue hal-02945570 v1

CAD Tools and File format performance evaluation in designing lattice structures for additive manufacturing

Abdul Hadi Azman , Frédéric Vignat , François Villeneuve
Jurnal Teknologi, 2018, 80 (4), ⟨10.11113/jt.v80.12058⟩
Article dans une revue hal-01912821 v1
Image document

How 3D printing technologies can contribute into an iterative design process? Case study to hit a drum for Disabled Children

Guillaume Thomann , Justine Coton , Marcel de Gois Pinto , Julien Veytizou , François Villeneuve
Production journal, 2017, 27, ⟨10.1590/0103-6513.004717⟩
Article dans une revue hal-01878876 v1

Improving dimensional accuracy in EBM using beam characterization and trajectory optimization

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel
Additive Manufacturing, 2017, 14, pp.1 - 6. ⟨10.1016/j.addma.2016.12.002⟩
Article dans une revue hal-01575006 v1
Image document

Designing for physically disabled users: benefits from human motion capture – a case study

Guillaume Thomann , Cécile Magnier , François Villeneuve , Richard Palluel-Germain
Disability and Rehabilitation: Assistive Technology, 2016, pp.695-700. ⟨10.3109/17483107.2015.1042078⟩
Article dans une revue hal-01176137 v1

Feasibility Study of Hand Motion Analysis by the Leap Motion Sensor

Justine Coton , Julien Veytizou , Guillaume Thomann , François Villeneuve
AMSE Modelling, Measurement and Control, Series C : Chemistry, Geology, Environment and Bioengineering, 2016, 77, pp.73 - 83
Article dans une revue hal-01575013 v1

Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting

Mathieu Suard , Guilhem Martin , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.
Additive Manufacturing, 2015, 8, pp.124-131. ⟨10.1016/j.addma.2015.10.002⟩
Article dans une revue hal-01240214 v1

Towards Stiffness Prediction of Cellular Structures Made by Electron Beam Melting (EBM)

Mathieu Suard , P. Lhuissier , Rémy Dendievel , Jean-Jacques Blandin , Frédéric Vignat et al.
Powder Metallurgy, 2014, pp.Advance Articles. ⟨10.1179/1743290114Y.0000000093⟩
Article dans une revue hal-00997282 v1
Image document

Challenges in expert user participation in design evaluation meetings

Romain Farel , Onur Hisarciklilar , Jean-François Boujut , Guillaume Thomann , François Villeneuve
Journal of Design Research, 2013, 11 (2), pp.186-201. ⟨10.1504/JDR.2013.055155⟩
Article dans une revue hal-00856142 v1

Manufacturing tolerance analysis based on the model of manufactured part and monte carlo simulation with experimental data

Minh-Hien Bui , François Villeneuve , Alain Sergent
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227 (5), pp.690 - 701. ⟨10.1177/0954405412468387⟩
Article dans une revue hal-00769640 v1
Image document

Integrating the human factors characterization of disabled users in a design method. Application to an interface for playing acoustic music

Julien Veytizou , Cécile Magnier , François Villeneuve , Guillaume Thomann
Association for the Advancement of Modelling and Simulation Techniques in Enterprises, 2012, 73 (Issue 3), pp.173
Article dans une revue hal-00903819 v1

Seventeen Projects Carried Out by Students Designing for and with Disabled Children: Identifying Designers' Difficulties During the Whole Design Process

Cécile Magnier , Guillaume Thomann , François Villeneuve
Assistive Technology: The Official Journal of RESNA, 2012, 24 (4), pp.273-285. ⟨10.1080/10400435.2012.669808⟩
Article dans une revue hal-00766051 v1

Metallic additive manufacturing: state-of-the-art review and prospects

Benjamin Vayre , Frédéric Vignat , François Villeneuve
Mechanics & Industry, 2012, 13 (02), pp.89-96. ⟨10.1051/meca/2012003⟩
Article dans une revue hal-00735206 v1

Tolerance analysis in machining using the MMP. Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
International Journal of Computer Integrated Manufacturing, 2012, 25 (Février 2012), pp.136 - 149
Article dans une revue hal-00633768 v1

Methods for designing assistive devices extracted from 16 case studies in the literature

Cécile Magnier , Guillaume Thomann , François Villeneuve , Peggy Zwolinski
International Journal on Interactive Design and Manufacturing, 2012, 6 (2), pp.93-100. ⟨10.1007/s12008-012-0143-2⟩
Article dans une revue hal-00677757 v1

Evaluation of different methods in quantification of manufacturing defects.

Minh-Hien Bui , François Villeneuve , Alain Sergent
Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 2011, 4 (2), pp.10
Article dans une revue hal-00633775 v1

3D Simulation of manufacturing defects for tolerance analysis

Mojtaba Kamali Nejad , Frédéric Vignat , Alain Desrochers , François Villeneuve
Journal of Computing and Information Science in Engineering, 2010, 10 (2), 13 p
Article dans une revue hal-00414226 v1

Analysis of the deviations of a casting and machining process using a Model of Manufactured Parts

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad
CIRP Journal of Manufacturing Science and Technology, 2010, 2, pp.198-207. ⟨10.1016/j.cirpj.2010.04.008⟩
Article dans une revue istex hal-00575892 v1
Image document

Expert user-centred design, a cooperative product development approach

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve
Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 2010, 3 (2), pp.37 - 47
Article dans une revue hal-00573996 v1

From the nominal model to a model of manufactured parts in a CAD context

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad
Asian Journal of Science and Technology, 2009, 2 (2), pp.35-42
Article dans une revue hal-00575886 v1

A collaboration-centred approach to manage engineering knowledge: A case study of an engineering SME

Cyril Beylier , Franck Pourroy , François Villeneuve , Alain Mille
Journal of Engineering Design, 2009, 20 (6), pp.523-542. ⟨10.1080/09544820801898482⟩
Article dans une revue hal-00207996 v1

Simulation of the geometrical defects of manufacturing

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
International Journal of Advanced Manufacturing Technology, 2009, 45 (7), pp.631-649
Article dans une revue hal-00366209 v1

Towards a 5-Axis machining CAPP system: a set-up planning tool solving accessibility constraints

Vincent Capponi , François Villeneuve
Journal of Computing and Information Science in Engineering, 2009, 9 (4), pp.1-14
Article dans une revue hal-00466146 v1

Performances d'un moyen de mesure in situ sur MOCN.

Alain Sergent , Daniel Duret , Dinh Son Nguyen , François Villeneuve
Contrôles essais mesures, 2008, 22, pp. 10
Article dans une revue hal-00371479 v1

Computer Aided Process Planning, strategy and models in aircraft industry

Vincent Capponi , Omar Zirmi , Daniel Brissaud , François Villeneuve
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220 (4), pp.541-553
Article dans une revue hal-00359984 v1

Interactions H/M dans la préparation de l'usinage des pièces aéronautiques

Vincent Capponi , François Villeneuve
Revue Internationale d'Ingenierie Numerique, 2005, 1 (2), pp.167-183
Article dans une revue hal-00360649 v1

3D transfer of tolerances using a SDT approach: application to turning process

Frédéric Vignat , François Villeneuve
Journal of Computing and Information Science in Engineering, 2003, pp. 45-53. ⟨10.1115/1.1565073⟩
Article dans une revue hal-00366259 v1

Tolerancing for manufacturing: a three dimensional model

François Villeneuve , Olivier Legoff , Yann Landon
International Journal of Production Research, 2001, 39 (8), pp. 1625-1648
Article dans une revue hal-00366281 v1

Three Dimensional geometrical tolerancing in process planning

François Villeneuve , Olivier Legoff , Pierre Bourdet
CIRP Journal of Manufacturing Systems, 2000, 30 (5), 20 p
Article dans une revue hal-00366299 v1

Geometrical Tolerancing in Process Planning : a tridimensional approach

Olivier Legoff , François Villeneuve , Pierre Bourdet
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1999, 213 (6), pp. 635-640. ⟨10.1243/0954405991517083⟩
Article dans une revue istex hal-00366321 v1

Omega, an expert CAPP system

François Villeneuve , Laurent Sabourin
Advances in Engineering Software, 1996, 25, pp. 51-59
Article dans une revue hal-00366359 v1

Computer Aided Process Planning : state of the art and future trends

François Villeneuve
Mécanique Industrielle et Matériaux, 1994, 47 (5), pp. 477-484
Article dans une revue hal-00367987 v1

Computer Aided Process Planning : two ways for including a user's know-how

François Villeneuve , Bernard Anselmetti
CIRP Journal of Manufacturing Systems, 1992, 21 (3), pp. 167-172
Article dans une revue hal-00366367 v1

Génération automatique de processus d'usinage

François Villeneuve , Etienne Lefur
Mécanique, Matériaux, Electricite, revue du GAMI, 1986, 418, 10 p
Article dans une revue hal-00367990 v1

Tolerance analysis in manufacturing using the MMP Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
M. Giordano, L. Mathieu, F. Villeneuve. Product Lifecycle Management, Geometric Variations, wiley iste, pp.145-171, 2010
Chapitre d'ouvrage hal-00575894 v1

Current and future Issues in Tolerancing: the GD&T French Research Group Contribution

Luc Mathieu , François Villeneuve
geometric tolerancing of products, ISTE Wiley, pp.3-19, 2010, 978-1-84821-118-6
Chapitre d'ouvrage hal-00962220 v1

Three-dimensional Analysis and Synthesis of Manufacturing Tolerances

Frédéric Vignat , François Villeneuve
Geometric Tolerancing of Products, ISTE Wiley, pp.303-337, 2010, 978-1-84821-118-6
Chapitre d'ouvrage hal-00962221 v1

Tolerance analysis in multi-operational machining process based on the model of manufactured part

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
A. Bernard. Digital Enterprise Technology, EPU, pp.753-772, 2009, ISBN: 978-2-7483-4598-8
Chapitre d'ouvrage hal-00466150 v1

A Pragmatic Approach to Knowledge Management in an Engineering Design SME

Cyril Beylier , Franck Pourroy , François Villeneuve
A. Bernard; S. Tichkiewitch. Methods and Tools for Effective Knowledge Life-Cycle-Management, Springer, pp.463-478, 2008
Chapitre d'ouvrage hal-00366365 v1

Empowering CAPP Systems with Human-Computer Interaction Study

Vincent Capponi , François Villeneuve
Tichkiewitch, Serge; Tollenaere, M.; Ray, Pascal (Eds.). Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Springer, 11 p., 2007, ISBN: 978-1-4020-6760-0
Chapitre d'ouvrage hal-00186880 v1

Simulation of the Manufacturing Process, Generation of a Model of the Manufactured Parts

Frédéric Vignat , François Villeneuve
P. F. Cunha and P. G. Maropoulos. Digital Enterprise Technology, Springer Verlag, pp.545-552, 2007
Chapitre d'ouvrage hal-00466148 v1

Chapitre 1. Les problématiques actuelles de recherche en tolérancement et les apports du GRT

Luc Mathieu , François Villeneuve
Luc Mathieu et François Villeneuve. Tolérancement géométrique des produits, Hermès Science, pp.19-35, 2007, ISBN 978-2-7462-1509-2
Chapitre d'ouvrage hal-00187588 v1

Chapitre 12. Analyse et synthèse tridimensionnelles de spécifications de fabrication

Frédéric Vignat , François Villeneuve
Luc Mathieu et François Villeneuve. Tolérancement géométrique des produits, Hermès Science, pp.311-343, 2007, ISBN 978-2-7462-1509-2
Chapitre d'ouvrage hal-00187589 v1

Vers un dispositif collaboratif de construction et de validation de connaissances métier

Cyril Beylier , Franck Pourroy , François Villeneuve
Les systèmes de production : applications interdisciplinaires et mutations, Hermès, pp.175-188, 2007
Chapitre d'ouvrage hal-00187233 v1

Simulation of the manufacturing process in a tolerancing point of view, Generic resolution of the positioning problem

François Villeneuve , Frédéric Vignat
Models for Computer Aided Tolerancing in Design and Manufacturing, Springer, pp.179-190, 2006
Chapitre d'ouvrage hal-00366831 v1

Manufacturing process simulation for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat
Advances in Integrated Design and Manufacturing in Mechanical Engineering, Springer, pp.189-200, 2005
Chapitre d'ouvrage hal-00366261 v1

Three-dimensional geometrical tolerancing: quantification of machining defects

Olivier Legoff , François Villeneuve
Geometric Product Specification and Verification, Kluwer Academic Publishers, pp. 185-196, 2003
Chapitre d'ouvrage hal-00367977 v1

Génération automatique des processsus de fabrication

François Villeneuve
Alain Bernard. Fabrication assistée par ordinateur sous la direction de Alain BERNARD, Ed., Lavoisier, Hermès, pp. 295-350, 2003
Chapitre d'ouvrage hal-00368134 v1

Three-dimensional quantification of machining defects

François Villeneuve , Olivier Legoff , François Geiskopf
Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, 10 p., 2002
Chapitre d'ouvrage hal-00367978 v1

Optimization of end-mill roughing operation sequence

François Villeneuve
Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publisher, pp. 447-454, 1999
Chapitre d'ouvrage hal-00367980 v1

A model for the optimization of the relation between product means and product

Stéphane Tassel , François Villeneuve , Olivier Legoff
Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publisher, pp. 455-462, 1999
Chapitre d'ouvrage hal-00367984 v1

Modélisation des contraintes de fabrication en conception

François Villeneuve , Bernard Anselmetti
Michel Tollenaere. Conception de produits mécaniques : méthodes, modèles et outils, Hermès, Partie II, chap. 7, pp. 163-184, 1998
Chapitre d'ouvrage hal-00368135 v1

Feature-state approach for operation sequence generation

Bernard Anselmetti , Alain Chep , Kwamiwi Mawussi , François Villeneuve
Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publisher, pp. 93-102, 1997
Chapitre d'ouvrage hal-00367986 v1

Génération Ascendante de Processus, application aux entités d'usinage de type alésage

François Villeneuve
La gamme automatique en usinage, Groupe GAMA, Ed. HERMES, 15 p., 1990
Chapitre d'ouvrage hal-00368138 v1
Image document

Caractérisation d'une commande thermique du procédé Wire Arc Additive Manufacturing pour l'asservissement

Anthony Dellarre , Nicolas Beraud , Frédéric Vignat , Nicolas Tardif , François Villeneuve
Manufacturing'21, UGA, Grenoble INP, CNRS, Jun 2024, GRENOBLE, France
Communication dans un congrès hal-04784356 v1
Image document

Caractérisation d'un poste de soudure Cold Métal Transfer pour le pilotage du procédé Wire Arc Additive Manufacturing

Anthony Dellarre , Nicolas Béraud , Nicolas Tardif , Frédéric Vignat , François Villeneuve et al.
S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès hal-04278696 v1
Image document

Conception des surfaces minimales triplement périodiques à densité variable pour la fabrication additive

Emilio Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
Communication dans un congrès hal-04278700 v1
Image document

Equivalent Material analysis of Triply Periodic Minimal Surfaces

Emilio Adrian Ramirez Salazar , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
25ème Congrès Français de Mécanique, Aug 2022, Nantes, France
Communication dans un congrès hal-04102619 v1

A design methodology for graded density triply periodic minimal surfaces

E.A. Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve
International joint conference on mechanics, design engineering and advanced manufacturing, JCM 2022, Jun 2022, Ischia, Italy
Communication dans un congrès hal-03767334 v1
Image document

Design parameters effects on relative density of triply periodic minimal surfaces for additive manufacturing

E.A. Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
31st CIRP Design Conference 2021, May 2021, Twente, France. pp.13-18, ⟨10.1016/j.procir.2021.05.002⟩
Communication dans un congrès hal-03247860 v1

Influence des paramètres de conception sur la densité relative de cellules à base de surfaces minimales triplement périodiques (TPMS) pour la fabrication additive

E.A. Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
17e Colloque National S-mart, Mar 2021, en visioconférence, France
Communication dans un congrès hal-03290639 v1
Image document

Finite Element Modeling and Validation of Metal Deposition in Wire Arc Additive Manufacturing

Akram Chergui , Nicolas Béraud , Frédéric Vignat , François Villeneuve
JCM 2020 - 10th International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Jun 2020, Aix-en-Provence, France. ⟨10.1007/978-3-030-70566-4_11⟩
Communication dans un congrès hal-02945976 v1
Image document

Simulation thermomécanique de l'apparition des défauts géométriques sur des pièces produites en fabrication additive EBM

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Andrzej Kusiak , Matthieu Museau et al.
24ème Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-02945749 v1

Towards a novel thermal criterion for form defects prediction in Wire Arc Additive Manufacturing: Finite element modelling and validation

Akram Chergui , Frédéric Vignat , François Villeneuve , Nicolas Béraud
Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), Sep 2019, Pavia, Italy
Communication dans un congrès hal-02945632 v1
Image document

Simulation thermique du procédé Wire Arc Additive Manufacturing

Akram Chergui , Frédéric Vignat , François Villeneuve , Nicolas Béraud
16ème colloque national S-mart, Apr 2019, Les Karellis, France
Communication dans un congrès hal-02945795 v1
Image document

Analyse de la variation géométrique des pièces produites en fabrication additive EBM - Cas de pièces avec volume surplombant

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Thanh Hoang , Matthieu Museau et al.
16e Colloque National S-mart, Apr 2019, Les Karellis, France
Communication dans un congrès hal-02106747 v1

The 3D Edge Reconstruction from 2D Image by Using Correlation Based Algorithm

Kanuengnit Patoommakesorn , Frédéric Vignat , François Villeneuve
2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), Apr 2019, Tokyo, Japan. pp.372-376, ⟨10.1109/IEA.2019.8714965⟩
Communication dans un congrès hal-03768894 v1

Rapid Thermal Simulation of Powder Bed Additive Manufacturing

Frédéric Vignat , Nicolas Béraud , François Villeneuve
2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec 2018, Bangkok, Thailand. pp.1498-1502, ⟨10.1109/IEEM.2018.8607695⟩
Communication dans un congrès hal-02945648 v1

Development of a Knowledge-Based System for Help in Decision Making: a Medical Application

Justine Coton , Guillaume Thomann , François Villeneuve
21st International Conference on Engineering Design (ICED17), Aug 2017, Vancouver, Canada
Communication dans un congrès hal-01585985 v1

Simulation based optimized beam velocity in additive manufacturing

Frédéric Vignat , Nicolas Béraud , François Villeneuve
The 6th International Conference on Manufacturing Engineering and Process, May 2017, LISBON, Portugal. ⟨10.1088/1742-6596/885/1/012016⟩
Communication dans un congrès hal-01625275 v1

User-centered development of an information system in patient’s motor capacity evaluation

Justine Coton , Dominique Vincent-Genod , Guillaume Thomann , Vuillerot Carole , François Villeneuve
3rd International Conference on Health Care Systems Engineering (HCSE17), May 2017, Florence, Italy. ⟨10.1007/978-3-319-66146-9⟩
Communication dans un congrès hal-01585964 v1

A new Straight Line Matching Technique by Integration of Vision-based image processing

Kanuengnit Patoommakesorn , Frédéric Vignat , François Villeneuve
48th CIRP Conference on Manufacturing Systems, Jun 2015, Naples, Italy. pp.777-782, ⟨10.1016/j.procir.2015.08.106⟩
Communication dans un congrès hal-01355147 v1

Assistive products development: a framework to respond to the value requirements from users and manufacturers points of view

Marcel de Gois Pinto , Guillaume Thomann , François Villeneuve
26th CIRP Design Conference, Jun 2016, Stockholm, Sweden. pp.559-564, ⟨10.1016/j.procir.2016.04.203⟩
Communication dans un congrès hal-01355139 v1

Etude de faisabilité de l'analyse de mouvement de doigts par le capteur LeapMotion

Justine Coton , Julien Veytizou , Guillaume Thomann , François Villeneuve
Conférence Handicap 2016 – 9ème édition, Jun 2016, Paris, France
Communication dans un congrès hal-01355130 v1
Image document

Etude pilote pour l’utilisation de la Kinect V2 pour l’évaluation motrice des maladies neuromusculaires. Cas de la MFM.

Justine Coton , Julien Veytizou , Jonathan Martinat , Kevin Barra , Guillaume Thomann et al.
Colloque "Jeunes Chercheuses Jeunes Chercheurs", Jun 2015, Paris, France. pp.23
Communication dans un congrès hal-01176187 v1
Image document

L'approche CARACTH : Concevoir des produits ajustés aux capacités motrices des usagers

Julien Veytizou , Guillaume Thomann , François Villeneuve
14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France
Communication dans un congrès hal-01911970 v1
Image document

Design Configurations and Creation of Lattice Structures for Metallic Additive Manufacturing

Abdul Hadi , Frédéric Vignat , François Villeneuve
14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France
Communication dans un congrès hal-01236568 v1
Image document

Evaluation de la chaine numérique en fabrication par Electron Beam Melting

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel
14ème Colloque National AIP PRIMECA, Mar 2015, La Plagne, France
Communication dans un congrès hal-01236567 v1

Evaluating Current CAD Tools Performances in the Context of Design for Additive Manufacturing

Abdul Hadi , Frédéric Vignat , François Villeneuve
Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2014, Toulouse, France
Communication dans un congrès hal-01241624 v1
Image document

De la caractérisation des spécificités motrices vers la conception d’interfaces personnalisables

Julien Veytizou , Guillaume Thomann , François Villeneuve
Les technologies d’assistance : de la compensation à l’autonomie, Jun 2014, Paris, France
Communication dans un congrès hal-01121997 v1

Impact of EBM Fabrication Strategies on Geometry and Mechanical Properties of Titanium Cellular Structures

Mathieu Suard , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat , Jean-Jacques Blandin et al.
Direct Digital Manufacturing Conference 2014, Mar 2014, Berlin, Germany
Communication dans un congrès hal-00997293 v1

New Trajectories in Electron Beam Melting Manufacturing to Reduce Curling Effect

Nicolas Béraud , Frédéric Vignat , François Villeneuve , Rémy Dendievel
CIRP CMS 2014, Apr 2014, Windsor, Canada. pp.738-743, ⟨10.1016/j.procir.2014.02.038⟩
Communication dans un congrès hal-01061618 v1

Identification on some design key parameters for additive manufacturing: application on Electron Beam Melting

Benjamin Vayre , Frédéric Vignat , François Villeneuve
Forty Sixth CIRP Conference on Manufacturing Systems, May 2013, Setubal, Portugal. pp.6
Communication dans un congrès hal-00948914 v1
Image document

Un produit universel pour une interface sur mesure

Julien Veytizou , Guillaume Thomann , François Villeneuve
Colloque Jeunes Chercheurs et Jeunes Chercheuses, Jun 2013, Paris, France. pp.1
Communication dans un congrès hal-00903827 v1

The right knowledge management strategy for Engineering Analysis SME: a Case Study

Christophe Chevalier , Franck Pourroy , François Villeneuve , Alex Du Pasquier
23rd CIRP Design Conference, Mar 2013, Bochum, Germany. pp.10
Communication dans un congrès hal-00948921 v1

Règles de Conception pour la Fabrication Additive de Matériaux Cellulaires en Titane par " Electron Beam Melting

Mathieu Suard , Benjamin Vayre , Pierre Lhuissier , Rémy Dendievel , Frédéric Vignat et al.
Poudre & Matériaux Frittés, May 2013, Belfort, France
Communication dans un congrès hal-00997289 v1

The use of Virtual reality for the design of an innovative surgical instrument

François Villeneuve , Guillaume Thomann , Jérôme J. Tonetti
Grenoble Interdisciplinary Days 2013, Devices & health, Sep 2013, Grenoble, France
Communication dans un congrès hal-00962223 v1

Design Rules for Additive Manufacturing of Titanium Cellular Structures by Electron Beam Melting

Mathieu Suard , Rémy Dendievel , Benjamin Vayre , Pierre Lhuissier , Frédéric Vignat et al.
EUROMAT 2013, Sep 2013, madrid, Spain
Communication dans un congrès hal-00997287 v1
Image document

Réflexion sur une méthodologie intégrant l'analyse des spécificités motrices dans le processus de conception

Julien Veytizou , Guillaume Thomann , François Villeneuve
13ème Colloque National AIP PRIMECA, Mar 2012, Le Mont-Dore, France. pp.1
Communication dans un congrès hal-00990634 v1

Designing for additive manufacturing

Benjamin Vayre , Frédéric Vignat , François Villeneuve
45th CIRP Conference on Manufacturing Systems, May 2012, Athens, Greece. 6 p
Communication dans un congrès hal-00733693 v1
Image document

Intégration d'outils scientifiques et techniques dans un processus de conception : modélisation des facteurs humains pour les IHM

Julien Veytizou , Cécile Magnier , Guillaume Thomann , François Villeneuve
Handicap 2012 : 7ème congrès sur les aides techniques pour les personnes handicapées., Jun 2012, Paris, France. pp.91
Communication dans un congrès hal-00752764 v1

Manufacturing tolerance analysis based on the Model of Manufactured Part and Monte Carlo simulation with experimental data

Minh Hien Bui , Alain Sergent , François Villeneuve
12th CIRP conference on Computer Aided Tolerancing, Apr 2012, Huddersfield, United Kingdom
Communication dans un congrès hal-01111901 v1
Image document

analyse de l'activité pour améliorer les pratiques des élèves ingénieurs en conception : application a l'adaptation ergonomiques du matériel musical

Guillaume Thomann , Cécile Magnier , Emilie Cornu , François Villeneuve
12ème Colloque National AIP PRIMECA, Produits, Procédés et Systèmes Industriels : intégration Réel-Virtuel, Mar 2011, Le Mont Dore, France
Communication dans un congrès hal-00628397 v1

Which virtual reality environment for usage evaluation of innovative surgical instrument in minimally invasive surgery ?

Guillaume Thomann , Quoc Viet Dang , Jérôme J. Tonetti , François Villeneuve
21st CIRP Design Conference : Interdisciplinary Design, Mar 2011, Daejeon, South Korea. pp. 180-186
Communication dans un congrès hal-00633700 v1

Etat des lieux des technologies de fabrication additive métallique

Benjamin Vayre , Frédéric Vignat , François Villeneuve
12ème Colloque National AIP PRIMECA, Le Mont Dore, 29 Mars- 1er avril 2011 : Produits, Procédés et Systèmes Industriels : intégration Réel-Virtuel, Mar 2011, Le Mont Dore, France. pp.9
Communication dans un congrès hal-00633781 v1
Image document

Identification of machining defects by Small Displacement Torsor and form parameterization method

Alain Sergent , Minh-Hien Bui , Hugues Favreliere , Daniel Duret , Serge Samper et al.
IDMME 2010, Oct 2010, Bordeaux, France. pp.1-6
Communication dans un congrès hal-00565431 v1

Assessment of the impact of calculation methodologies on defect determinations in manufacturing

Minh-Hien Bui , Alain Sergent , François Villeneuve
IDMME-Virtual Concept 2010, Oct 2010, Bordeaux, France. pp.CD
Communication dans un congrès hal-00575902 v1

An instrumented process to support user-centred design

Cédric Masclet , Frédéric Noël , Guillaume Thomann , François Villeneuve
7th International Conference on Product Lifecycle Management, Jul 2010, Bremen, Germany
Communication dans un congrès hal-00531558 v1
Image document

Investigation of methods for the design of assistive device : UCD and medical tools

Cécile Magnier , Guillaume Thomann , François Villeneuve , Peggy Zwolinski
IDMME_P30, Oct 2010, Bordeaux, France
Communication dans un congrès hal-00537622 v1

New Trends in tolerancing, the GD&T French Research Group point of view

Luc Mathieu , François Villeneuve
11th CIRP International Seminar on Computer Aided Tolerancing (CIRP CAT 2009), Mar 2009, Annecy, France
Communication dans un congrès hal-00385828 v1

Observation and analysis of surgical tasks: annotation systems new rod insertion system for spinal fusion in MIS

Guillaume Thomann , Jérôme Tonetti , Rahi Rasoulifar , François Villeneuve , Alain Di Donato
The 21st Conference of the Society of Medical Innovation and Technology, SMIT 09, Oct 2009, Sinaia, Romania. pp.1
Communication dans un congrès hal-00451844 v1
Image document

Applying Scenarios in the context of Specific User Design: Surgeon as an Expert User, and Design for Handicapped Children

Guillaume Thomann , Rahi Rasoulifar , François Villeneuve
CIRP Design Conference 2009: Competitive Design, Mar 2009, Cranfield, United Kingdom. 8 p
Communication dans un congrès hal-00393991 v1
Image document

Tolerance analysis in manufacturing using the MMP Comparison and evaluation of three different approaches

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
11th CIRP International Conference on Computer Aided Tolerancing, Mar 2009, Annecy, France. 10 p
Communication dans un congrès hal-00366342 v2

Managing engineering knowledge in special machine design companies

Pierre-Emmanuel Vinand , Franck Pourroy , Guy Prudhomme , François Villeneuve
International Conference on Knowledge Management and Information Sharing, KMIS 2009, Oct 2009, Madeira, Portugal. pp.CD
Communication dans un congrès hal-00466152 v1

Analysis of the deviations of a casting and machining process using a Model of Manufactured Parts

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad
42nd CIRP conference on Manufacturing Systems, Jun 2009, Grenoble, France. pp.CD
Communication dans un congrès hal-00466151 v1
Image document

Observation, annotation and analysis of design activities: How to find an appropriate tool?

Guillaume Thomann , Rahi Rasoulifar , Brigitte Meillon , François Villeneuve
International Conference on Engineering Design, ICED'09, Aug 2009, Stanford - CA, United States. 11 poages
Communication dans un congrès hal-00451840 v1
Image document

User-Designer collaboration in the design process of surgical instruments: new aspects for annotation as a communication tool

Onur Hisarciklilar , Rahi Rasoulifar , Jean-François Boujut , Guillaume Thomann , François Villeneuve
International Conference on Engineering Design, ICED'09, Aug 2009, Stanford - CA, United States. 11 p
Communication dans un congrès hal-00451841 v1
Image document

Scenarios and the design process in medical application

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve
CIRP Design Conference 2009: Competitive Design, Mar 2009, Cranfield, United Kingdom. 6 p
Communication dans un congrès hal-00392271 v1
Image document

Engineering Design in surgery: An analysis model for prototype validation

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve
CIRP Design Conference 2008 : Design Synthesis, Apr 2008, Twente, Netherlands. 6 p
Communication dans un congrès hal-00276086 v1

Healthcare Management Technology; Place of Design process and role of the universities

Rahi Rasoulifar , Jenny Dankelman , Guillaume Thomann , François Villeneuve
Euromot 2008, Sep 2008, Nice, France. 13 p
Communication dans un congrès hal-00366219 v1

Education in healthcare engineering: learn from, collaborate with and design for an expert user

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve
CIMEC 2008, CIRP International Manufacturing Engineering Education Conference, Oct 2008, Nantes, France. 11 p
Communication dans un congrès hal-00366249 v1

Tolerance analysis in multi-operational machining process based on the Model of Manufactured Part

Mojtaba Kamali Nejad , Frédéric Vignat , François Villeneuve
DET 2008 - 5th International Conference on Digital Enterprise Technology, Oct 2008, Nantes, France. 10 p
Communication dans un congrès hal-00366227 v1

Tolerance analysis in machining, an approach combining the Model of Manfactured Part and the Jacobian-Torsor model

Mojtaba Kamali Nejad , Alain Desrochers , François Villeneuve , Frédéric Vignat
IDETC/CIE 2008 ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Aug 2008, New York, United States. 10 p
Communication dans un congrès hal-00366241 v1

From the nominal model to a Model of Manufactured Parts in a CAD context

Frédéric Vignat , François Villeneuve , Mojtaba Kamali Nejad
CIRP Design conference 2008, Apr 2008, Enschede, Netherlands. 6 p
Communication dans un congrès hal-00366233 v1
Image document

Integrating an expert user in the Design Process: How to make out surgeon needs during new surgical instruments Design Case study

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve
TMCE 2008, Seventh International Symposium on Tools and Methods of Competitive Engineering, Apr 2008, Izmir, Turkey. pp. 415-426
Communication dans un congrès hal-00276089 v1
Image document

A numerical approach for 3D manufacturing tolerances synthesis

Frédéric Vignat , François Villeneuve
10th CIRP International Seminar on Computer Aided Tolerancing, Mar 2007, Erlangen, Germany. pp.CD
Communication dans un congrès hal-00186338 v1
Image document

Proposal of a New Design Methodology in the Surgical Domain

Rahi Rasoulifar , Guillaume Thomann , Jean Caelen , François Villeneuve
ICED'07, International Conference On Engineering Design, Aug 2007, Paris, France. 12 p
Communication dans un congrès hal-00184698 v1

A way to manage calculation engineers' knowledge

Cyril Beylier , Franck Pourroy , François Villeneuve
17th CIRP International Design Seminar, The Future of Product Development, Mar 2007, Berlin, Germany. 10 p. sur CD
Communication dans un congrès hal-00186910 v1
Image document

Vers une analyse de scénarios pour la conception d'outils chirurgicaux

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve , Jean Caelen
18ème Congrès Français de la Mécanique, Aug 2007, Grenoble, France. 6 p
Communication dans un congrès hal-00184694 v1

Implementation of a light knowledge sharing tool in engineering design

Cyril Beylier , Franck Pourroy , François Villeneuve
ICED'07, International Conference On Engineering Design, Aug 2007, Paris, Cité des sciences et de l'industrie, France. CD + résumé pp. 587-588
Communication dans un congrès hal-00186903 v1
Image document

Premières Propositions de Modèle d'Analyse de Scénario, pour la Conception d'Outils Chirurgicaux Innovants

Rahi Rasoulifar , Guillaume Thomann , François Villeneuve , Jean Caelen
10ème Colloque National AIP Primeca, Apr 2007, La Plagne, France. 11 p
Communication dans un congrès hal-00184657 v1

Mise en œuvre d'une démarche et d'un outil de gestion de " connaissances métier " basés sur la collaboration

Cyril Beylier , Franck Pourroy , François Villeneuve
10ème Colloque National AIP PRIMECA, 2007, La Plagne, France
Communication dans un congrès hal-00378181 v1

A way to foster knowledge sharing in engineering design SMEs

Cyril Beylier , Franck Pourroy , François Villeneuve
6th Integrated Design and Manufacturing in Mechanical Engineering, CD, IDMME 2006, May 2006, Grenoble, France
Communication dans un congrès hal-00375281 v1

Simulation of the manufacturing process, generation of a model of manufactured parts

Frédéric Vignat , François Villeneuve
3rd CIRP Conference on Digital Enterprise Technology, DET06, Sep 2006, Setubal, Portugal
Communication dans un congrès hal-00376261 v1

KALIS, un outil liant informations et activités pour partager les connaissances en ingénierie

Cyril Beylier , Franck Pourroy , François Villeneuve
C2EI - Connaissances et compétences en entreprise industrielle, Jun 2006, Nantes, France
Communication dans un congrès hal-00378081 v1

Tolerancing Transfer in the Field of Manufacturing Process: The Model of Manufactured Part (MMP)

François Villeneuve
1st Jubilee Scientific Conference Manufacturing Engineering in Time of Information Society, Jun 2006, Gdansk, Poland. pp.425-435
Communication dans un congrès hal-00376263 v1

Empowering CAPP systems with human computer interaction study

Vincent Capponi , François Villeneuve
IDMME 2006, May 2006, --, France
Communication dans un congrès hal-00375301 v1

Vers un dispositif léger de construction et de validation collaboratives de connaissances métier

Cyril Beylier , Franck Pourroy , François Villeneuve
colloque IPI06, Nov 2006, Allevard, France
Communication dans un congrès hal-00378085 v1

Simulation of the manufacturing process (2): Analysis of its consequences on a functional tolerance

Frédéric Vignat , François Villeneuve
9th CIRP Computer Aided Tolerancing Seminar, CAT2005, Apr 2005, Tempe, Arizona, United States
Communication dans un congrès hal-00375246 v1

Simulation of the manufacturing process (1): Generic resolution of the positioning problem

Frédéric Vignat , François Villeneuve
9th CIRP Computer Aided Tolerancing Seminar, CAT2005, Apr 2005, Tempe, Arizona, United States
Communication dans un congrès hal-00375247 v1

Handling of Alternative Processes for Machining of Aeronautical Parts in a CAPP System

Vincent Capponi , François Villeneuve , Henri Paris
IFAC 2004, Oct 2004, Athens, Greece
Communication dans un congrès hal-01355475 v1

CAPP, Strategy and models in aircraft industry

Vincent Capponi , Omar Zirmi , Daniel Brissaud , François Villeneuve
IDMME 2004, Apr 2004, Bath, United Kingdom
Communication dans un congrès hal-01355497 v1

Product and process modeling : simulation of a manufacturing process for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat
VIDA 2004, 1st International Conference on Virtual Design and Automation, Jun 2004, Poznan, Poland
Communication dans un congrès hal-01355482 v1

Manufacturing process simulation for tolerance analysis and synthesis

François Villeneuve , Frédéric Vignat
IDMME 2004, Apr 2004, Bath, United Kingdom
Communication dans un congrès hal-01355487 v1

Using Knowledge of high speed machining to design a shopfloor

François Geiskopf , François Kiefer , Emmanuel Caillaud , François Villeneuve
IDMME 2004, Apr 2004, Bath, United Kingdom
Communication dans un congrès hal-01355508 v1

3D synthesis of manufacturing tolerances using a SDT approach

François Villeneuve , Frédéric Vignat
8th CIRP Computer Aided Tolerancing Seminar, CAT 2003, Apr 2003, Charlotte, Caroline du Nord, United States
Communication dans un congrès hal-01355703 v1

Knowledge management in an industrial digital process

Alexandre Ciclet , François Villeneuve
CIRP Design Seminar 2003, May 2003, Grenoble, France
Communication dans un congrès hal-01355745 v1

Modélisation des moyens de production pour l'intégration des contraintes de fabrication en conception de produit

François Villeneuve
C2i, International Conference on Integrated Engineering, Apr 2002, Timisoara, Roumanie
Communication dans un congrès hal-01355803 v1

Etude d’implantation d’une filière numérique intégrée à base de connaissances

Alexandre Ciclet , François Villeneuve
1st colloque Gestion des Compétences et des Connaissances en Génie Industriel, Dec 2002, Nantes, France
Communication dans un congrès hal-01355807 v1

Three-dimensional geometrical tolerancing: quantification of machining defects

Olivier Legoff , François Villeneuve
7th International Seminar on Computer Aided Tolerancing, CAT2001, Apr 2001, Cachan, France. pp.201-212
Communication dans un congrès hal-01355747 v1

Quantification tridimensionnelle des défauts de fabrication pour l’analyse et la synthèse de tolérances

François Villeneuve , Olivier Legoff , François Geiskopf
3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'2000, May 2000, Montréal, Canada
Communication dans un congrès hal-01355813 v1

Three-dimensional quantification of machining defects

Olivier Legoff , François Villeneuve , François Geiskopf
2nd International Seminar on Improving Machine Tool Performance, Jul 2000, La Baule, France
Communication dans un congrès hal-01355751 v1

Three Dimensional geometrical tolerancing in process planning

François Villeneuve , Olivier Legoff , Pierre Bourdet
32nd CIRP International Seminar on Manufacturing Systems, May 1999, Leuven, Belgium
Communication dans un congrès hal-01355754 v1

Intégration Produit/Process par le tolérancement tridimensionnel en fabrication

François Villeneuve , Olivier Legoff , Pierre Bourdet
3ème congrès international de génie industriel, May 1999, Montréal, Canada. pp.1123-1132
Communication dans un congrès hal-01355815 v1

A model for the optimization of the relation between product means and product

Stéphane Tassel , François Villeneuve , Olivier Legoff
2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'98, May 1998, Compiègne, France
Communication dans un congrès hal-01355762 v1

Optimization of end-mill roughing operation sequence

François Villeneuve
2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'98, May 1998, Compiègne, France
Communication dans un congrès hal-01355760 v1

Earliest analysis of the manufacturing of a product : adequation between production means and product

François Villeneuve , Stéphane Tassel
9th symposium on Information Control in Manufacturing, INCOM'98, Jun 1998, Nancy-Metz, France
Communication dans un congrès hal-01355756 v1

Feature state approach for process planning

Bernard Anselmetti , Alain Chep , Kwamiwi Mawussi , François Villeneuve
1st International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'96, Apr 1996, Nantes, France
Communication dans un congrès hal-01355766 v1

Machining features, production rules and constraint programming, keys for a CAPP system

François Villeneuve , Laurent Sabourin
2nd International Conference on Industrial Automation, Jun 1995, Nancy, France. pp.397-404
Communication dans un congrès hal-01355768 v1

Omega, an expert CAPP system

Laurent Sabourin , François Villeneuve
4th ASME International Computers in Engineering conference, Sep 1994, Minneapolis, United States. pp.261-269
Communication dans un congrès hal-01355773 v1

Object Data Base, AI and CAD-CAM : Application to the Process Ascending Generation (PAG) Concept

Marc Barrabes , François Villeneuve
Computers in Design, Manufacturing and Production, 7th Annual European Computer Conference (IEEE), Compeuro 93, May 1993, Evry, France. pp.320-329
Communication dans un congrès hal-01355781 v1

Computer Aided Process Planning : two ways for including a user's know-how

Bernard Anselmetti , François Villeneuve
23th International Conference on Production Systems, Jun 1991, Nancy, France
Communication dans un congrès hal-01355786 v1