Recherche - Archive ouverte HAL Accéder directement au contenu

Filtrer vos résultats

21 résultats

Manufacturing of bio-based composite filaments by extrusion/coating and their properties for additive manufacturing

Xikun Wu , Geoffrey Ginoux , Samir Allaoui
17ème Journée Scientifique GFP Section Grand-Est, Jul 2021, Mulhouse, France
Communication dans un congrès hal-03346307v1

Decrease in non-linear viscosity of a polylactide nanocomposite with regard to the clay volume fraction

Geoffrey Ginoux , Philippe Dony , Isabelle Vroman , Sébastien Alix
Rheologica Acta, 2020, 59 (5), pp.269-278. ⟨10.1007/s00397-020-01199-4⟩
Article dans une revue hal-03084664v1

A combined experimental-numerical approach for the development of bio-based composite by and for additive manufacturing

Geoffrey Ginoux , Xikun Wu , Joseph Paux , Samir Allaoui
4th European Congress on Eco-Plasturgy and sustainable, intelligent and safe plastic materials, Mar 2022, Seneffe, Belgium
Communication dans un congrès hal-03692905v1

Development and characterization of biobased continuous fiber composites by coextrusion in additive manufacturing

Xikun Wu , Geoffrey Ginoux , joseph paux , Samir Allaoui
EUROMAGH 2023, Apr 2023, Marrakech, Morocco
Communication dans un congrès hal-04546533v1
Image document

Influence of fused filament fabrication parameters on tensile properties of polyactide/layered silicate nanocomposite using response surface methodology

Geoffrey Ginoux , Isabelle Vroman , Sébastien Alix
Journal of Applied Polymer Science, 2021, 138 (14), pp.50174. ⟨10.1002/app.50174⟩
Article dans une revue hal-03467209v1

Development and optimization of continuous bio-composite filament by extrusion/coating for additive manufacturing

Xikun Wu , Geoffrey Ginoux , joseph paux , Samir Allaoui
EUROMAGH 2023, Apr 2023, Marrakech, Morocco
Communication dans un congrès hal-04546536v1
Image document

Investigation of 3D printing strategy on the mechanical performance of coextruded continuous carbon fiber reinforced PETG

Samir Kasmi , Geoffrey Ginoux , Samir Allaoui , Sébastien Alix
Journal of Applied Polymer Science, 2021, 138 (37), pp.50955. ⟨10.1002/app.50955⟩
Article dans une revue hal-03222664v1

Développement par fabrication additive de biomatériaux pour le comblement osseux

Geoffrey Ginoux , Conrad Mastalerz , Isabelle Vroman , Xavier X. Coqueret , Halima Kerdjoudj , et al.
RFA CNRS, Feb 2022, Online, France
Communication dans un congrès hal-03692901v1

Nanocomposites à base de polylactide/silicate lamellaire en fabrication par filament fondu

Geoffrey Ginoux , Vroman Isabelle , Sébastien Alix
1ère Journée doctorale transfrontalière, URCA, Mar 2018, Reims, France
Communication dans un congrès hal-03091108v1
Image document

Improving thermomechanical properties of fused filament fabrication printed parts by using nanocomposites

Geoffrey Ginoux , Philippe Dony , Isabelle Vroman , Sébastien Alix
Composites Part B: Engineering, 2021, 224, pp.109227. ⟨10.1016/j.compositesb.2021.109227⟩
Article dans une revue hal-03467217v2
Image document

New preparation method of microstructurally and mechanically standardized PETG specimens by material extrusion additive manufacturing and machining

Geoffrey Ginoux , Joseph Paux , Samir Allaoui
Additive Manufacturing, 2023, 66, pp.103471. ⟨10.1016/j.addma.2023.103471⟩
Article dans une revue hal-04546470v1

Formulation and rheological modeling of PLA/clay nanocomposites to customize the induced microstructure and thermomechanical properties of printed materials

Geoffrey Ginoux , Philippe Dony , Isabelle Vroman , Sébastien Alix
5th European Congress on Eco-Plasturgy and sustainable, intelligent and safe plastic materials, Mar 2023, Lyon, France
Communication dans un congrès hal-04546525v1

Influence of printing irregularities on the elastic behavior and mesostructural stress concentrations in material extrusion additive manufacturing—A numerical approach based on X-ray tomography

Joseph Paux , Geoffrey Ginoux , Shyam Pulickan , Samir Allaoui
Additive Manufacturing, 2023, 76, pp.103760. ⟨10.1016/j.addma.2023.103760⟩
Article dans une revue hal-04546480v1

Characterisation, optimisation and viability of polyactide/layered silicate nanocomposite for fused filament fabrication

Geoffrey Ginoux , Philippe Dony , Isabelle Vroman , Sébastien Alix
EUROMAGH 2020, Oct 2020, Rouen, France
Communication dans un congrès hal-03078847v1

Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters

Samir Kasmi , Geoffrey Ginoux , Eric Labbé , Sébastien Alix
Rapid Prototyping Journal, 2021, ⟨10.1108/RPJ-08-2021-0214⟩
Article dans une revue hal-03550598v1

4D printing of PBS-based biomaterial scaffolds for bone tissue engineering

Geoffrey Ginoux , Conrad Mastalerz , Vroman Isabelle , Pierre Millet , Christelle Kowandy , et al.
2nd International E-meeting on Biopolymers and Bioplastics, Oct 2021, Greenville, United States
Communication dans un congrès hal-03540543v1

Formulation of bio-based composite filaments by extrusion/coating for fused filament fabrication: a structural and mechanical analysis

Xikun Wu , Geoffrey Ginoux , Samir Allaoui
2nd International Conference on Additive Fabrication of Composites, Nov 2021, Lorient, France
Communication dans un congrès hal-03540564v1

Numercial investigation of the influence of the shape of the cavities on the rigidity and the anisotropy of FFF printed material based on X-ray tomography results

Shyam Pulickan , Joseph Paux , Geoffrey Ginoux , Samir Allaoui
2nd International Conference on Additive Fabrication of Composites, Nov 2021, Lorient, France
Communication dans un congrès hal-03540556v1

Impression 3D de biomatériaux pour le comblement osseux à base de PLA et d‘hydroxyapatite

Geoffrey Ginoux , Sébastien Alix , Conrad Mastalerz , Pierre Millet , Halima Kerdjoudj , et al.
CEMA'2022, Jun 2022, Saly, Senegal
Poster de conférence hal-04546513v1

Influence of FDM process parameters on PLA/OMMT nanocomposites: a rheological and mechanical approach

Geoffrey Ginoux , Vroman Isabelle , Sébastien Alix
EUPOC 2017: Polymers and Additive Manufacturing, May 2017, Gargnano, Italy
Communication dans un congrès hal-03091139v1
Image document

Continuous additive manufacturing of hemp yarn-reinforced biocomposites with improved impregnation method

Geoffrey Ginoux , Xikun Wu , Chaimae Laqraa , Damien Soulat , Joseph Paux , et al.
Composites Science and Technology, 2024, 251, pp.110561. ⟨10.1016/j.compscitech.2024.110561⟩
Article dans une revue hal-04546489v1