Accéder directement au contenu

Guillaume Kermouche

132
Documents

Publications

Image document

Quantitative mapping of transient thermodynamic states in ultrafast laser nanostructuring of quartz

Huu Dat Nguyen , Arshak Tsaturyan , Sergio Sao Joao , Rajeev Dwivedi , Aram Melkonyan
Ultrafast Science, inPress, 4, pp.0056. ⟨10.34133/ultrafastscience.0056⟩
Article dans une revue emse-04380253v1
Image document

3D Numerical modelling of residual stresses induced in finish turning of a fillet radius on a shaft made of 15-5PH

Maxime Dumas , Dorian Fabre , Frédéric Valiorgue , Guillaume Kermouche , Bertrand Truffart
Procedia CIRP, 2023, 117, pp.122 à 127. ⟨10.1016/j.procir.2023.03.022⟩
Article dans une revue emse-04103988v1
Image document

Multi-scale in-situ micro-mechanical characterization of Polymer Core Solder Ball (PCSB) coatings for BGA interconnections

Irati Malkorra , Sergio Sao Joao , U. Costa , D. Chalavoux , S. Bucher
Microelectronics Reliability, 2023, 148, pp.115135. ⟨10.1016/j.microrel.2023.115135⟩
Article dans une revue emse-04186045v1
Image document

Quantification of softening kinetics in cold-rolled pure aluminum and copper using high-temperature scanning indentation

Gabrielle Tiphéne , Guillaume Kermouche , Paul Baral , Claire Maurice , Gaylord Guillonneau
Materials & Design, 2023, pp.112171. ⟨10.1016/j.matdes.2023.112171⟩
Article dans une revue emse-04170743v1
Image document

Compressive behaviour of carbon fibres micropillars by in situ SEM nanocompression

T.S. Guruprasad , Vincent Keryvin , Guillaume Kermouche , Yvan Marthouret , Sergio Sao Joao
Composites Part A: Applied Science and Manufacturing, 2023, 173, pp.107699. ⟨10.1016/j.compositesa.2023.107699⟩
Article dans une revue emse-04171824v1
Image document

Investigating the effect of tungsten initial microstructure on restoration kinetics using a mean field model

Maxime Lemetais , Alan Durif , David Piot , Matthieu Lenci , Marianne Richou
Fusion Engineering and Design, 2023, 194, pp.113708. ⟨10.1016/j.fusengdes.2023.113708⟩
Article dans une revue emse-04103469v1
Image document

Temperature gradient based annealing methodology for tungsten recrystallization kinetics assessment

Maxime Lemetais , Matthieu Lenci , Claire Maurice , Timothée Devictor , Alan Durif
Fusion Engineering and Design, 2023, 193, pp.113785. ⟨10.1016/j.fusengdes.2023.113785⟩
Article dans une revue emse-04102806v1

On the Application of some Plasticity Laws

Louis Hennocque , Julien Favre , Nicolas Meyer , Thomas Sourisseau , Claire Maurice
Solid State Phenomena, 2023, 353, pp.163 - 168. ⟨10.4028/p-SXs81M⟩
Article dans une revue emse-04401025v1

Bioclogging in Porous Media: Effect of the Presence of Clay

Hanène Souli , Jean-Marie Fleureau , Tahani Farah , Guillaume Kermouche , Jean-Jacques Fry
Indian Geotechnical Journal, 2022, 52 (2), pp.315 à 327. ⟨10.1007/s40098-021-00569-w⟩
Article dans une revue hal-03735806v1
Image document

FIB-SEM based 3D tomography of micro-electronic components: Application to automotive high-definition LED lighting systems

Safa Nocairi , Nicolas Compère , Antonin Bermond , Christine Roucoules , Sergio Sao Joao
Microelectronics Reliability, 2022, 137, pp.114749. ⟨10.1016/j.microrel.2022.114749⟩
Article dans une revue hal-03782555v1
Image document

Automotive optoelectronic components submitted to thermal shock: Impact of component architecture on mechanical reliability

Safa Nocairi , Khalil Maarouf , Christine Roucoules , Guillaume Kermouche , Sergio Sao Joao
Microelectronics Reliability, 2022, 128, pp.114422. ⟨10.1016/j.microrel.2021.114422⟩
Article dans une revue hal-03730392v1

T-REX: Numerical tool for tungsten damage assessment for DEMO

A. Durif , M. Richou , J.-M. Bergheau , L. Gallais , G. Kermouche
Journal of Nuclear Materials, 2022, 569, pp.153906. ⟨10.1016/j.jnucmat.2022.153906⟩
Article dans une revue hal-03751031v1
Image document

Plastic Flow Under Shear-Compression at the Micron Scale-Application on Amorphous Silica at High Strain Rate

Gaylord Guillonneau , Sergio Sao Joao , Benedicte Adogou , Simon Breumier , Guillaume Kermouche
JOM Journal of the Minerals, Metals and Materials Society, 2022, 74 (6), pp.2231-2237. ⟨10.1007/s11837-021-05142-7⟩
Article dans une revue hal-03734993v1

Competition between recovery and recrystallization in two tungsten supplies according to ITER specifications

A. Durif , D. Piot , M. Richou , L. Gallais , M. Lemetais
Journal of Materials Science, 2022, 57 (15), pp.7729-7746. ⟨10.1007/s10853-022-07123-w⟩
Article dans une revue hal-03751029v1
Image document

Temperature–dependent dynamic plasticity of micro-scale fused silica

Remo N. Widmer , Alexander Groetsch , Guillaume Kermouche , Ana Diaz , Gilles Pillonel
Materials & Design, 2022, 215, pp.110503. ⟨10.1016/j.matdes.2022.110503⟩
Article dans une revue hal-03728557v1
Image document

Le verre : fragile ou ductile ?

Étienne Barthel , Thierry Deschamps , Guillaume Kermouche , Christine Martinet , Gergely Molnár
Reflets de la Physique, 2022, 74, pp.46-51. ⟨10.1051/refdp/202274046⟩
Article dans une revue hal-03955403v1
Image document

Effect of ball-burnishing on hydrogen-assisted cracking of a martensitic stainless steel

Alixe Dreano , Michella Alnajjar , Ferdinando Salvatore , Joël Rech , Cédric Bosch
International Journal of Hydrogen Energy, 2022, 47 (96), pp.39654 à 39665. ⟨10.1016/j.ijhydene.2022.09.110⟩
Article dans une revue emse-03908445v1
Image document

3D numerical modelling of turning-induced residual stresses – A two-scale approach based on equivalent thermo-mechanical loadings

Maxime Dumas , Dorian Fabre , Frédéric Valiorgue , Guillaume Kermouche , Alexis van Robaeys
Journal of Materials Processing Technology, 2021, 297, pp.117274. ⟨10.1016/j.jmatprotec.2021.117274⟩
Article dans une revue emse-03788474v1
Image document

High-Temperature Scanning Indentation: A new method to investigate in situ metallurgical evolution along temperature ramps

Gabrielle Tiphéne , Paul Baral , Solène Comby-Dassonneville , Gaylord Guillonneau , Guillaume Kermouche
Journal of Materials Research, 2021, 36 (12), pp.2383-2396. ⟨10.1557/s43578-021-00107-7⟩
Article dans une revue hal-03214795v1
Image document

Real-time high-temperature scanning indentation: Probing physical changes in thin-film metallic glasses

Solene Comby-Dassonneville , Gabrielle Tiphene , Alejandro Borroto , Gaylord Guillonneau , Lucian Roiban
Applied Materials Today, 2021, 24, pp.101126. ⟨10.1016/j.apmt.2021.101126⟩
Article dans une revue hal-03484851v1
Image document

Turning-induced surface integrity for a fillet radius in a 316L austenitic stainless steel

Maxime Dumas , Guillaume Kermouche , Frédéric Valiorgue , Alexis van Robaeys , Fabien Lefebvre
Journal of Manufacturing Processes, 2021, 68, Part A, pp.222 à 230. ⟨10.1016/j.jmapro.2021.05.031⟩
Article dans une revue emse-03789764v1

Controlled single and repeated impact testing for material plastic behaviour characterisation under high strain rates

S. Breumier , Francis Trudeau-Lalonde , Thierry Lafrance , Etienne Robert , Aurélien Villani
Strain, 2021, 57 (6), pp.e12399
Article dans une revue emse-03789870v1
Image document

An Attempt to Assess Recovery/Recrystallization Kinetics in Tungsten at High Temperature Using Statistical Nanoindentation Analysis

Liz Karanja , Matthieu Lenci , David Piot , Claire Maurice , Alan Durif
Crystals, 2021, 11 (1), pp.37. ⟨10.3390/cryst11010037⟩
Article dans une revue hal-03214794v1
Image document

Grain growth and damages induced by transient heat loads on W

M Minissale , A Durif , G Kermouche , M Richou , L Gallais
Physica Scripta, 2021, 96, pp.124032. ⟨10.1088/1402-4896/ac27df⟩
Article dans une revue hal-03357224v1

Numerical study of the influence of tungsten recrystallization on the divertor component lifetime

A. Durif , M. Richou , G. Kermouche , Jean-Michel Bergheau
International Journal of Fracture, 2021, 230 (44958), pp.83-98. ⟨10.1007/s10704-021-00568-1⟩
Article dans une revue hal-04084018v1

Extrinsic Measurement of Carbon Black Aggregate Distribution within a Fluoroelastomer Matrix from Nanoindentation Experiments

Paul Baral , Clémence Fradet , Florian Lacroix , Eric Le Bourhis , Gaylord Guillonneau
ACS Applied Materials & Interfaces, 2020, 12 (5), pp.6716-6726. ⟨10.1021/acsami.9b20286⟩
Article dans une revue hal-02481338v1
Image document

Evolution of the surface integrity while turning a fillet radius in a martensitic stainless steel 15-5PH

M. Dumas , Frédéric Valiorgue , G. Kermouche , A. Van Robaeys , U. Masciantonio
Procedia CIRP, 2020, 87, pp.101-106. ⟨10.1016/j.procir.2020.02.038⟩
Article dans une revue hal-03214797v1
Image document

Real time imaging of strain fields induced by the ferrite-to-austenite transformation in high purity iron

Nicolas Bruzy , Michel Coret , Bertrand Huneau , Laurent Stainier , Christophe Denoual
Materials Today Communications, 2020, 24, pp.101028. ⟨10.1016/j.mtcomm.2020.101028⟩
Article dans une revue hal-02864828v1

Correlation between microstructural gradient and microindentation properties of dissimilar weld between INCONEL 625 and Duplex Stainless Steel

Ammar Chabbi , Mabrouk Bouabdallah , Sergio Sao-Joao , Achraf Boudiaf , Guillaume Kermouche
Metallurgical Research & Technology, 2020, 117 (4), pp.407. ⟨10.1051/metal/2020035⟩
Article dans une revue hal-03214796v1
Image document

Highlighting the impact of shear strain on the SiO 2 glass structure: From experiments to atomistic simulations

Christine Martinet , Manon Heili , Valérie Martinez , Guillaume Kermouche , Gergely Molnar
Journal of Non-Crystalline Solids, 2020, 533, pp.119898. ⟨10.1016/j.jnoncrysol.2020.119898⟩
Article dans une revue hal-02869331v1
Image document

Recrystallization at high temperature of two tungsten materials complying with the ITER specifications

M. Richou , A. Durif , M. Lenci , M. Mondon , M. Minissale
Journal of Nuclear Materials, 2020, 542, pp.152418. ⟨10.1016/j.jnucmat.2020.152418⟩
Article dans une revue hal-03164252v1
Image document

Indentation creep vs. indentation relaxation: A matter of strain rate definition?

Paul Baral , Guillaume Kermouche , Gaylord Guillonneau , Gabrielle Tiphéne , Jean-Michel Bergheau
Materials Science and Engineering: A, 2020, 781, pp.139246. ⟨10.1016/j.msea.2020.139246⟩
Article dans une revue emse-04511474v1
Image document

Microstructural evolution and mechanical properties of ultrafine-grained pure α-iron and Fe-0.02%C steel processed by high-pressure torsion: Influence of second-phase particles

Yinyin Zhang , Sergio Sao-Joao , Sylvie Descartes , Guillaume Kermouche , Frank Montheillet
Materials Science and Engineering: A, 2020, 795, pp.139915. ⟨10.1016/j.msea.2020.139915⟩
Article dans une revue hal-02927805v1
Image document

High strain rate micro-compression for crystal plasticity constitutive law parameters identification

S. Breumier , S. Sao-Joao , A. Villani , M. Lévesque , G. Kermouche
Materials & Design, 2020, 193, pp.108789. ⟨10.1016/j.matdes.2020.108789⟩
Article dans une revue hal-03214798v1
Image document

Indentation cracking in silicate glasses is directed by shear flow, not by densification

Etienne Barthel , Vincent Keryvin , Gustavo Rosales-Sosa , Guillaume Kermouche
Acta Materialia, 2020, 194, pp.473-481. ⟨10.1016/j.actamat.2020.05.011⟩
Article dans une revue hal-02861295v1
Image document

Extrinsic Measurement of Carbon Black Aggregate Distribution within a Fluoroelastomer Matrix from Nanoindentation Experiments

Paul Baral , C. Fradet , Florian Lacroix , E. Le Bourthis , Gaylord Guillonneau
ACS Applied Materials & Interfaces, 2020, 12 (5), pp.6716 à 6726. ⟨10.1021/acsami.9b20286⟩
Article dans une revue emse-04511430v1

Indentation creep vs. indentation relaxation: A matter of strain rate definition?

Paul Baral , Guillaume Kermouche , Gaylord Guillonneau , Gabrielle Tiphene , Jean-Michel Bergheau
Materials Science and Engineering: A, 2020, 781, pp.139246. ⟨10.1016/j.msea.2020.139246⟩
Article dans une revue hal-02916177v1
Image document

A high power laser facility to conduct annealing tests at high temperature

M. Minissale , A. Durif , P. Hiret , Thierry Vidal , J. Faucheux
Review of Scientific Instruments, 2020, 91 (3), pp.035102. ⟨10.1063/1.5133741⟩
Article dans une revue hal-03164162v1
Image document

Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation

S. Breumier , A. Villani , C. Maurice , M. Levesque , G. Kermouche
Materials & Design, 2019, 169, pp.107659. ⟨10.1016/j.matdes.2019.107659⟩
Article dans une revue hal-02411714v1
Image document

Inverse identification of tungsten static recrystallization kinetics under high thermal flux

Alan Durif , M. Richou , G. Kermouche , Jean Michel Bergheau
Fusion Engineering and Design, 2019, 146, pp.1759-1763. ⟨10.1016/j.fusengdes.2019.02.141⟩
Article dans une revue emse-02890953v1
Image document

A new long-term indentation relaxation method to measure creep properties at the micro-scale with application to fused silica and PMMA

P. Baral , G. Guillonneau , G. Kermouche , J.-M. Bergheau , J.-L. Loubet
Mechanics of Materials, 2019, 137, pp.103095. ⟨10.1016/j.mechmat.2019.103095⟩
Article dans une revue hal-02389797v1
Image document

Effects of micro-knurling and femtosecond laser micro texturing on aluminum long-term surface wettability

Synthia Divin-Mariotti , Pierrick Amieux , Alina Pascale-Hamri , Virginie Auger , Guillaume Kermouche
Applied Surface Science, 2019, 479, pp.344-350. ⟨10.1016/j.apsusc.2019.02.025⟩
Article dans une revue emse-02890893v1
Image document

Influence of Cold Spray Nozzle Displacement Strategy on Microstructure and Mechanical Properties of Cu/SiC Composites Coating

Olga Matts , Hussein Hammoud , Alexey Sova , Zineb Bensaid , Guillaume Kermouche
Key Engineering Materials, 2019, 813, pp.110-115. ⟨10.4028/www.scientific.net/KEM.813.110⟩
Article dans une revue emse-02892779v1

Performance assessment of high heat flux W monoblock type target using thin graded and copper interlayers for application to DEMO divertor

M. Richou , F. Gallay , B. Böswirth , I. Chu , G. Dose
Fusion Engineering and Design, 2019, 146 (Part A), pp.858-861. ⟨10.1016/j.fusengdes.2019.01.098⟩
Article dans une revue emse-02892829v1
Image document

Impact of tungsten recrystallization on ITER-like components for lifetime estimation

Alan Durif , Marianne Richou , G. Kermouche , Matthieu Lenci , Jean-Michel Bergheau
Fusion Engineering and Design, 2019, 138, pp.247-253. ⟨10.1016/j.fusengdes.2018.11.003⟩
Article dans une revue emse-02892621v1
Image document

Mesoscopic Strain Fields Measurement During the Allotropic α − γ Transformation in High Purity Iron

Nicolas Bruzy , Michel Coret , Bertrand Huneau , G. Kermouche , M. Mondon
Experimental Mechanics, 2019, 59 (8), pp.1145-1157. ⟨10.1007/s11340-019-00525-z⟩
Article dans une revue hal-02317370v2
Image document

Near surface transformations of stainless steel cold spray and laser cladding deposits after turning and ball-burnishing

C. Courbon , A. Sova , F. Valiorgue , H. Pascal , J. Sijobert
Surface and Coatings Technology, 2019, 371, pp.235-244. ⟨10.1016/j.surfcoat.2019.01.092⟩
Article dans une revue emse-02888162v1

A semitopological mean-field model of discontinuous dynamic recrystallization

David Piot , Guillaume Smagghe , John Joseph Jonas , Christophe Desrayaud , Frank Montheillet
Journal of Materials Science, 2018, Metals, 53 (11), pp.8554-8566. ⟨10.1007/s10853-018-2137-3⟩
Article dans une revue emse-02008506v1

Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron

David Tumbajoy Spinel , Xavier Maeder , G Guillonneau , S. Sao-Jao , Sylvie Descartes
Materials & Design, 2018, ⟨10.1016/j.matdes.2018.03.014⟩
Article dans une revue hal-01864702v1

Experimental study of wear-induced delamination for DLC coated automotive components

Antonios Choleridis , Sergio Sao-Joao , Jihane Ben-Mohamed , David Chern , Vincent Barnier
Surface and Coatings Technology, 2018, 352, pp.549 - 560. ⟨10.1016/j.surfcoat.2018.08.048⟩
Article dans une revue hal-01862173v1
Image document

In situ characterization of AA1050 recrystallization kinetics using high temperature nanoindentation testing

Paul Baral , Mathilde Laurent-Brocq , Gaylord Guillonneau , Jean-Michel Bergheau , Jean-Luc Loubet
Materials & Design, 2018, 152, pp.22-29. ⟨10.1016/j.matdes.2018.04.053⟩
Article dans une revue emse-02007638v1
Image document

Combination of mechanical and chemical pre-treatments to improve nitriding efficiency on pure iron

Victor Lacaille , Véronique Peres , Cécile Langlade , Constance Morel , Eric Feulvarch
Applied Surface Science, 2017, 414, pp.73-81. ⟨10.1016/j.apsusc.2017.04.084⟩
Article dans une revue hal-01522817v1
Image document

Plastic response of amorphous silicates, from atomistic simulations to experiments – A general constitutive relation

Gergely Molnar , Guillaume Kermouche , Etienne Barthel
Mechanics of Materials, 2017, 114, pp.1-8. ⟨10.1016/j.mechmat.2017.07.002⟩
Article dans une revue hal-02132502v1

Investigation of graded strengthened hyper-deformed surfaces by impact treatment: micro-percussion testing

David Tumbajoy-Spinel , Sylvie Descartes , Jean-Michel Bergheau , Halim Al-Baida , Cécile Langlade
IOP Conference Series: Materials Science and Engineering, 2017, 194, pp.012024. ⟨10.1088/1757-899X/194/1/012024⟩
Article dans une revue hal-02436498v1
Image document

Theoretical and experimental analysis of indentation relaxation test

Paul Baral , Gaylord Guillonneau , Guillaume Kermouche , Jean-Michel Bergheau , Jean-Luc Loubet
Journal of Materials Research, 2017, 32 (12), pp.2286-2296. ⟨10.1557/jmr.2017.203⟩
Article dans une revue hal-02389822v1
Image document

Assessment of mechanical property gradients after impact-based surface treatment: application to pure alpha-iron

David Tumbajoy-Spinel , Sylvie Descartes , Jean-Michel Bergheau , Victor Lacaille , Gaylord Guillonneau
Materials Science and Engineering: A, 2016, 667, pp.189-198. ⟨10.1016/j.msea.2016.04.059⟩
Article dans une revue emse-01505794v1
Image document

Transition from ductile to brittle failure of sodium silicate glasses: a numerical study

Gergely Molnar , Patrick Ganster , Anne Tanguy , János Török , Guillaume Kermouche
MRS Advances, 2016, 1 (24), pp.1797-1802. ⟨10.1557/adv.2016.166⟩
Article dans une revue hal-02132519v1
Image document

Impact of pressure on plastic yield in amorphous solids with open structure

E. Mantisi , G. Kermouche , E. Barthel , A. Tanguy
Physical Review E , 2016, 93, pp.33001 - 33001. ⟨10.1103/PhysRevE.93.033001⟩
Article dans une revue hal-01394099v1
Image document

Densification dependent yield criteria for sodium silicate glasses - An atomistic simulation approach

Gergely Molnar , Patrick Ganster , Anne Tanguy , Etienne Barthel , Guillaume Kermouche
Acta Materialia, 2016, 111, pp.129-137. ⟨10.1016/j.actamat.2016.03.053⟩
Article dans une revue emse-01353610v1
Image document

Perfectly plastic flow in silica glass

G. Kermouche , G. Guillonneau , J. Michler , J. Teisseire , E. Barthel
Acta Materialia, 2016, 114, pp.146 - 153. ⟨10.1016/j.actamat.2016.05.027⟩
Article dans une revue hal-01393682v1

Durability of bioclogging treatment of soils

Tahani Farah , Hanène Souli , Jean-Marie Fleureau , Guillaume Kermouche , Jean-Jacques Fry
Journal of Geotechnical and Geoenvironmental Engineering, 2016, 142 (Issue : 9; Article Number : 04016040 ), ⟨10.1061/(ASCE)GT.1943-5606.0001503⟩
Article dans une revue hal-01342068v1

A new method to determine the true projected contact area using nanoindentation testing

Gaylord Guillonneau , Guillaume Kermouche , Jean-Michel Bergheau , Jean-Luc Loubet
Comptes Rendus Mécanique, 2015, 343 (Issue : 7-8), pp.410-418. ⟨10.1016/j.crme.2015.06.004⟩
Article dans une revue emse-01500778v1
Image document

Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation?

G Guillonneau , G Kermouche , J Teisseire , E Barthel , Sandrine Bec
Philosophical Magazine, 2015, pp.1013517. ⟨10.1080/14786435.2015.1013517⟩
Article dans une revue hal-01111329v1
Image document

Original test device for crack propagation in the weld nugget of advanced high strength steels

Rémi Lacroix , Guillaume Kermouche , Arnaud Lens , Jean-Michel Bergheau , Helmut Klöcker
Engineering Fracture Mechanics, 2015, 138, pp.156-168. ⟨10.1016/j.engfracmech.2015.02.022⟩
Article dans une revue emse-01500896v1
Image document

Transformation par forgeage à chaud des microstructures lamellaires d’alliages hexagonaux

Michel Darrieulat , Frank Montheillet , David Piot , Guillaume Kermouche , Christophe Desrayaud
Matériaux & Techniques, 2015, 103 (5), pp.504. ⟨10.1051/mattech/2015037⟩
Article dans une revue hal-02025690v1

Identification des propriétés mécaniques des surfaces tribologiquement transformées (TTS) à partir des essais de nano-indentation et micro-compression de piliers

David Tumbajoy-Spinel , Guillaume Kermouche , Sylvie Descartes , Jean-Michel Bergheau , Victor Lacaille
Matériaux & Techniques, 2015, Comportements mécaniques : approches expérimentales et modélisations à différentes échelles, 103, ⟨10.1051/mattech/2015020⟩
Article dans une revue hal-01998746v1
Image document

Development of an improved method for identifying material stress-strain curve using repeated micro-impact testing

H. Al Baïda , Guillaume Kermouche , C. Langlade
Mechanics of Materials, 2015, 86, pp.11-20. ⟨10.1016/j.mechmat.2015.02.009⟩
Article dans une revue emse-01499477v1

Investigation of indentation-, impact- and scratch-induced mechanically affected zones in a copper single crystal

Pierre Juran , Pierre-Jacques Liotier , Claire Maurice , Frederic Valiorgue , Guillaume Kermouche
Comptes Rendus Mécanique, 2015, 343 (5-6), pp.344-353. ⟨10.1016/j.crme.2015.03.003⟩
Article dans une revue emse-01352766v1
Image document

Identifying the stress-strain curve of materials by microimpact testing. Application on pure copper, pure iron, and aluminum alloy 6061-T651

Halim Al Baïda , Cécile Langlade , Guillaume Kermouche , R.R. Ambriz
Journal of Materials Research, 2015, 30 (14), pp.2222-2230. ⟨10.1557/jmr.2015.186⟩
Article dans une revue emse-01499521v1
Image document

Hydrogen effect on dislocation nucleation in a ferritic alloy Fe-15Cr as observed per nanoindentation

Gaspard Vincent , Guillaume Kermouche , David Delafosse , Afrooz Barnoush
Materials Science and Engineering: A, 2014, 604, pp.86-91. ⟨10.1016/j.msea.2014.02.041⟩
Article dans une revue emse-00989488v1
Image document

Finite element analysis of the grain size effect on diffusion in polycrystalline materials

Victor Lacaille , C. Morel , Eric Feulvarch , Guillaume Kermouche , Jean-Michel Bergheau
Computational Materials Science, 2014, 95, pp.187-191. ⟨10.1016/j.commatsci.2014.07.026⟩
Article dans une revue emse-01498591v1
Image document

A simple method to minimize displacement measurement uncertainties using dynamic nanoindentation testing

Gaylord Guillonneau , Guillaume Kermouche , Sandrine Bec , Jean-Luc Loubet
Tribology International, 2014, 70, pp.190-198. ⟨10.1016/j.triboint.2013.10.013⟩
Article dans une revue emse-01161450v1
Image document

Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing

Guillaume Kermouche , F. Grange , C. Langlade
Materials Science and Engineering: A, 2013, 569, pp.71-77. ⟨10.1016/j.msea.2013.01.020⟩
Article dans une revue emse-01011578v1
Image document

Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties

Salim Lamri , C. Langlade , Guillaume Kermouche
Materials Science and Engineering: A, 2013, 560, pp.296-305. ⟨10.1016/j.msea.2012.09.070⟩
Article dans une revue emse-01011601v1
Image document

Viscoelastic-Viscoplastic Modelling of the Scratch Response of PMMA

Guillaume Kermouche , Nicolas Aleksy , Jean-Michel Bergheau
Advances in Materials Science and Engineering, 2013, 2013, pp.article ID289698. ⟨10.1155/2013/289698⟩
Article dans une revue emse-00942952v1
Image document

Micro-pillar testing of amorphous silica

Rémi Lacroix , Vincent Chomienne , G. Kermouche , J. Teisseire , S. Queste
International Journal of Applied Glass Science, 2012, 3 (1), pp.36-43. ⟨10.1111/j.2041-1294.2011.00075.x⟩
Article dans une revue hal-00677258v1
Image document

Plastic deformation and residual stresses in amorphous silica pillars under uniaxial loading

R. Lacroix , G. Kermouche , J. Teisseire , E. Barthel
Acta Materialia, 2012, 60 (15), pp.5555-5566. ⟨10.1016/j.actamat.2012.07.016⟩
Article dans une revue hal-00746956v1
Image document

Determination of mechanical properties by nanoindentation independently of indentation depth measurement

Gaylord Guillonneau , Guillaume Kermouche , Sandrine Bec , Jean-Luc Loubet
Journal of Materials Research, 2012, 27, pp.2551-2560. ⟨10.1557/jmr.2012.261⟩
Article dans une revue hal-00826308v1
Image document

Atomistic response of a model silica glass under shear and pressure

B. Mantisi , Arnaud Tanguy , G. Kermouche , E. Barthel
The European Physical Journal B: Condensed Matter and Complex Systems, 2012, 85 (9), pp.85:304. ⟨10.1140/epjb/e2012-30317-6⟩
Article dans une revue hal-00731348v1
Image document

Raman Mapping of the Indentation-Induced Densification of a Soda-Lime-Silicate Glass

Assia Kassir-Bodon , Thierry Deschamps , Christine Martinet , Bernard Champagnon , Jérémie Teisseire
International Journal of Applied Glass Science, 2012, pp.1-7 (2012). ⟨10.1111/j.2041-1294.2012.00078.x⟩
Article dans une revue hal-00672585v1
Image document

On the plastic deformation of soda-lime glass - a Cr3+ luminescence study of densification

Antoine Perriot , Etienne Barthel , Guillaume Kermouche , Gilles Querel , Damien Vandembroucq
Philosophical Magazine, 2011, 91 (7-9), pp.1245-1255. ⟨10.1080/14786435.2010.491808⟩
Article dans une revue hal-00495337v1
Image document

Numerical study of scratch velocity effect on recovery of viscoelastic-viscoplastic solids

Nicolas Aleksy , Guillaume Kermouche , Alain Vautrin , Jean-Michel Bergheau
International Journal of Mechanical Sciences, 2010, 52 (3), pp.455-463. ⟨10.1016/j.ijmecsci.2009.11.006⟩
Article dans une revue hal-00850009v1
Image document

Mechanical modeling of indentation-induced densification in amorphous silica

Guillaume Kermouche , Etienne Barthel , D. Vandembroucq , Philippe Dubujet
Acta Materialia, 2008, 56 (13), pp.3222-3228
Article dans une revue hal-00260324v1
Image document

A new index to estimate the strain rate sensitivity of glassy polymers using conical/pyramidal indentation

Guillaume Kermouche , Jean-Luc Loubet , Jean-Michel Bergheau
Philosophical Magazine, 2006, 86 (33-35), pp.5667-5677. ⟨10.1080/14786430600778682⟩
Article dans une revue hal-00513712v1

Application of a laser-based temperature gradient annealing for the study of tungsten recrystallization

Maxime Lemetais , Matthieu Lenci , Claire Maurice , Alan Durif , Marco Minissale
International Conference on Processing and Manufacturing of advanced materials (THERMCµEC 2023), 2023, Vienne, Austria
Communication dans un congrès hal-04456563v1
Image document

Assessment of agglomerated ceramic powders under impact by cold spraying

Geoffrey Celeste , Vincent Guipont , Djamel Missoum-Benziane , Guillaume Kermouche , Sergio Sao-Joao
International Thermal Spray Conference (ITSC), May 2022, Vienne, Austria
Communication dans un congrès hal-03667863v1

Mise au point d’une procédure de recuit laser permettant d’accélérer l’étude de la cinétique de recristallisation du tungstène

Maxime Lemetais , Mathieu Lenci , Claire Maurice , E. Bourgeaux , T Devictor
Matériaux 2022, 2022, Lille, France
Communication dans un congrès hal-03917311v1
Image document

Mesure des propriétés mécaniques des matériaux à haute vitesse de déformation par micro-compression

Bénédicte Adogou , Sergio Sao Joao , Gaylord Guillonneau , Fivel Marc , Simon Breumier
25e Congrès Français de Mécanique, Aug 2022, Nantes, France
Communication dans un congrès hal-04280010v1

Gradients thermiques générés par laser pour l'étude des composants face au plasma

Laurent Gallais , Marco Minissale , M. Lemetais , Matthieu Lenci , Alan Durif
Colloque de prospective 2022 de la FR-FCM, 2022, Montauban, France
Communication dans un congrès hal-03751068v1

Laser-based experiments to study the recrystallization kinetics of tungsten at high temperature’

M. Lemetais , Marco Minissale , Alan Durif , Marianne Richou , Matthieu Lenci
13th International Workshop on Subsecond Thermophysics IWSSTP-13, 2022, karlsruhe, Germany
Communication dans un congrès hal-03751049v1

Development of a New Method to Measure Surface Mechanical Properties Using In Situ SEM Microshear: Application at High Strain Rate

Gaylord Guillonneau , Guillaume Kermouche , Sergio Sao Joao
TMS 2022, Feb 2022, Anaheim, United States
Communication dans un congrès hal-04145755v1

Evidence of electron-irradiation activated creep in amorphous olivine at room temperature

Guillaume Kermouche , Paul Baral , Andrey Orekhov , Dominique Schryvers , G Lumbeek
Nanomechanical Testing in Materials Research and Development VIII, Oct 2022, Split, Croatia
Communication dans un congrès hal-04095774v1

High power CW laser heating for the study of materials at very high temperature

Laurent Gallais , Guillaume Kermouche , Marco Minissale , Yves Pontillon , Marianne Richou
11ème Forum Lasers et Plasmas, 2021, Belgodere, France
Communication dans un congrès hal-03466348v1

A high power laser facility to submit plasma facing materials to extreme heats loads

M. Minissale , A. Durif , Vidal Thibault , J. Faucheux , Matthieu Lenci
The Nineteenth International Conference on Fusion Reactor Materials, 2019, La Jolla, United States
Communication dans un congrès hal-02426816v1

LED Failure Localization Method due to Thermal Shock and Residual Stress Impact

S. Nocairi , C. Roucoules , S. Sao-Joao , G. Kermouche , H. Klöcker
2018 7th Electronic System-Integration Technology Conference (ESTC), Sep 2018, Dresden, Germany. pp.1-6
Communication dans un congrès emse-02016680v1
Image document

Finite element modelling and investigation of the interaction between an ultrasonic wave and a discontinuous interface

Vipul Vijigiri , Cedric Courbon , Guillaume Kermouche , Juliette Cayer-Barrioz
44th LEEDS 2017, Sep 2017, Lyon, France
Communication dans un congrès hal-03633896v1
Image document

Une approche semi–topologique pour la modélisation en champs moyens des recristallisations dynamique et métadynamique

David Piot , Guillaume Smagghe , Frank Montheillet , Guillaume Kermouche , Marc Bernacki
Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France
Communication dans un congrès hal-01625123v1

Stresses evolution at high temperature (200°C) in copper/alumina (Cu/Al2O3) stack

Nicole Doumit , Bonaventure Danoumbé , Stéphane Capraro , Jean-Pierre Chatelon , M.-F. Blanc-Mignon
DTIP, May 2017, Bordeaux, France
Communication dans un congrès hal-01564702v1

An extended mean field approach for modelling realistic grain size distribution evolutions during Discontinuous Dynamic RX and Post-Dynamic RX

Guillaume Smagghe , David Piot , Frank Montheillet , Aurore Montouchet , Marc Bernacki
6th International Conference on Recrystallization and Grain Growth: Recrystallization II: Dynamic Recrystallization, Jul 2016, Pittsburgh, Pennsylvania, United States
Communication dans un congrès hal-01479167v1
Image document

Prévision de l'effet de la taille de grain sur les traitements thermochimiques

Victor Lacaille , Constance Morel , Eric Feulvarch , Guillaume Kermouche , Jean-Michel Bergheau
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03446228v1
Image document

Assessing the plastic response of amorphous silica, a multiscale approach

Guillaume Kermouche , Boris Mantisi , Anne Tanguy , Etienne Barthel , Gaylord Guillonneau
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444646v1

Investigation of surface mechanical property evolution using nano-indentation and micro-compression testing

David Tumbajoy Spinel , Sylvie Descartes , Jean-Michel Bergheau , Guillaume Kermouche , Michler Johann
2nd Tribology Frontiers Conference, Oct 2015, Denver, United States
Communication dans un congrès hal-02436589v1
Image document

Plastic deformation of Na-aluminosilicate glasses under micro and nano-indentation

Vera Pukhkaya , Jérémie Teisseire , Manon Heili , Christine Martinet , Valérie Martinez
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444598v1
Image document

Effect of sliding velocity on friction-induced microstructural evolution in Copper

Grégoire Jacquet Jacquet , Guillaume Kermouche , Cédric Courbon , David Tumbajoy-Spinel , Joel Rech
6th International Conference on nanomaterials by severe plastic deformation (NANOSPD6), Jun 2014, Metz, France. ⟨10.1088/1757-899X/63/1/012039⟩
Communication dans un congrès emse-01527036v1

The grain size distribution effect on bioclogging and on the durability of the treatment.

T. Farah , Hanène Souli , Jean-Marie Fleureau , G. Kermouche , J.J. Fry
Int. Conf. on Envl. Sci. and Eng., Jun 2014, Istanbul, Turkey
Communication dans un congrès hal-01342222v1

The grain size distribution effect on bioclogging and on the durability of the treatment. "Bioclogging, an ecological and innovative process for seepage pre"vention in soils"

T. Farah , Hanène Souli , Jean-Marie Fleureau , Guillaume Kermouche , J.J. Fry
International Conference on Chemical, Biological and Environmental Engineering ICCBE, Sep 2014, MARNE LA VALLEE, France
Communication dans un congrès hal-01342464v1
Image document

Simulation multi-physique du procédé de frittage SPS (Spark Plasma Sintering)

Gaylord Guillonneau , Eric Feulvarch , Guillaume Kermouche , Anthony Pavia , Alain Peigney
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717832v1
Image document

Identification locale de loi de comportement à haute vitesse de déformation par micro-impact répété

Fabien Grange , Guillaume Kermouche , Cécile Langlade , Philippe Gilles
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422623v1
Image document

Nanoindentation : identification des propriétés mécaniques par détection synchrone de la seconde harmonique

Gaylord Guillonneau , Guillaume Kermouche , Sandrine Bec , Jean-Luc Loubet
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422587v1
Image document

Etude de l'influence de la dureté et de la microstructure du substrat sur le mécanisme d'endommagement par cloquage des dépôts PVD sous impact répété

Salim Lamri , Cécile Langlade , Guillaume Kermouche
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422606v1
Image document

Modélisation du microbillage par ultrasons

Mehdi Zarwel , Cécile Nouguier-Lehon , Guillaume Kermouche , Thierry Hoc
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592912v1
Image document

Simulation numérique de l'essai de rayure

Nicolas Aleksy , Guillaume Kermouche , Jean-Michel Bergheau , Alain Vautrin
9e Colloque national en calcul des structures, CSMA, May 2009, Giens, France
Communication dans un congrès hal-01408469v1
Image document

Etude thermo-mécanique de la rayure des polymères

Nicolas Aleksy , Guillaume Kermouche , Alain Vautrin , Jean-Michel Bergheau
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03391275v1
Image document

Caractérisation mécanique locale d’un point soudé d’acier à très haute résistance

Rémi Lacroix , Arnaud Lens , Guillaume Kermouche , Jean-Michel Bergheau , Helmut Klöcker
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03391241v1
Image document

Modélisation numérique de la rhéologie des polymères en rayure

Nicolas Aleksy , Guillaume Kermouche , Jean-Michel Bergheau , Alain Vautrin
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès hal-01509005v1
Image document

Modélisation du comportement mécanique des verres silicatés à l'échelle micronique.

Guillaume Kermouche , E. Barthel , Damien Vandembroucq , Ph. Dubujet
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03362452v1
Image document

Modélisation numérique de la densification par indentation des verres silicatés

Guillaume Kermouche , Etienne Barthel , Damien Vandembroucq , Philippe Dubujet
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès hal-01508948v1
Image document

Simulation numérique des polymères en rayure

Nicolas Aleksy , Guillaume Kermouche , Alain Vautrin , Jean-Michel Bergheau
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03361666v1
Image document

Simulation numérique de la rayure des matériaux

Guillaume Kermouche , Jean-Michel Bergheau
7e colloque national en calcul des structures, CSMA, May 2005, Giens, France
Communication dans un congrès hal-01812966v1

Development of a high power laser facility to screen recrystallization temperature of tungsten

Maxime Lemetais , Marco Minissale , Victor Somlay , Alan Durif , Matthieu Lenci
19th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC), 2023, Bonn, Germany
Poster de conférence hal-04456865v1

Hydrogen isotopes concentration profiles: Numerical assessments considering realistic trap sites distributions in tungsten divertor monoblock

Alan Durif , Etienne A Hodille , J.M. Bergeaud , James Dark , Y. Charles
21st International Conference on Fusion Reactor Materials (ICFRM), Oct 2023, Granada, Spain.
Poster de conférence hal-04407217v1

Investigation of the deformation behavior of agglomerated ceramic powders by cold spray

Geoffrey Celeste , Vincent Guipont , Djamel Missoum-Benziane , Guillaume Kermouche , Sergio Sao Joao
Rencontres Internationales sur la Projection Thermique (RIPT), Jun 2022, Jülich, Germany
Poster de conférence hal-03738456v1

Recrystallization and damage threshold of tungsten induced by a laser-based facility

Marco Minissale , Alan Durif , Cyprien Louis de Canonville , Matthieu Lenci , Marilyne Mondon
18th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC18), 2021, on line, Germany
Poster de conférence hal-03466330v1

Measuring/modelling the competition between recovery and recrystallization in ITER-like tungsten during high temperature annealing’

Guillaume Kermouche , Alan Durif , Liz Karanja , Matthieu Lenci , David Piot
18th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC 18), 2021, on line, Germany
Poster de conférence hal-03466334v1

A high power laser facility to submit plasma facing materials to extreme heat loads

M. Minissale , A. Durif , Vidal Thibault , Paul Hiret , J. Faucheux
The 17th International Conference on Plasma-Facing Materials and Components for Fusion (PFMC19), 2019, Eindhoven, Netherlands
Poster de conférence hal-02426836v1

Effect of the nanocrystallization on pure iron nitriding kinetics

Véronique Peres , Victor Lacaille , Guillaume Kermouche , Constance Morel , Jean-Michel Bergheau
Dr B. Pint; Dr D. Monceau. HTCPM 2016 - 9th International Symposium on High-Temperature Corrosion and Protection of Materials, May 2016, Les Embiez, France. Springer, Oxidation of Metals - Edition Springer, pp.ID 116, 2017
Poster de conférence hal-01427370v1

Microstructural and mechanical properties of hyperdeformed surfaces: in situ micro-pillar compression and EBSD investigations in α-iron

David Tumbajoy Spinel , Sergio Sao-Joao , X. Maeder , Sylvie Descartes , Jean-Michel Bergheau
European microscopy congress EMC2016, Aug 2016, Lyon, France
Poster de conférence hal-02436615v1

Measurement of mechanical properties gradient on impact based transformed surfaces: Nano-mechanical testing in graded micro-structured α-iron

David Tumbajoy Spinel , Sylvie Descartes , Jean-Michel Bergheau , Sergio Sao-Joao , Guilloneau G
European microscopy congress EMC2016, Aug 2016, Lyon, France
Poster de conférence hal-02436620v1

EBSD investigation of microstructure refinement by impact-based surface treatments

David Tumbajoy Spinel , X. Maeder , Guilloneau G , Sylvie Descartes , Jean-Michel Bergheau
Nanomechanical Testing in Materials Research and Development V, Oct 2015, Albufeira, Portugal
Poster de conférence hal-02436607v1