Guillaume Kermouche

Publications

Article dans une revue (106)

Shear mechanical properties measurements at the surface scale: Enhanced performances of the micro-shear compression specimen Fadlallah Abouhadid,Bénédicte Adogou,Sergio Sao Joao,Guillaume Kermouche,Johann Michleret al. Tribology International, 2026, 214 (Part B), pp.111269. ⟨10.1016/j.triboint.2025.111269⟩ Article dans une revue emse-05325866v1
Radial elastic heterogeneity in a high-modulus carbon fibre assessed by nano-indentation and micro-pillar compression Vincent Keryvin,Guillaume Kermouche,Sergio Sao Joao Carbon, 2026, 247, pp.120991. ⟨10.1016/j.carbon.2025.120991⟩ Article dans une revue emse-05385111v1
Modeling of recrystallization through the integration of disorientation and nucleation mechanisms: application to ferritic stainless steel Louis Hennocque,Julie Favre,Nicolas Meyer,Thomas Sourisseau,Frank Montheilletet al. Materials & Design, 2026, 265, pp.115944. ⟨10.1016/j.matdes.2026.115944⟩ Article dans une revue emse-05597253v1
Identification of recrystallized grains in EBSD maps: Automated adaptive thresholding using a Gaussian mixture approach Hugo Latuner,Julien Favre,A. Helstroffer,G. Inacio da Rosa,P. Jolyet al. Materials Characterization, 2026, 231, pp.115920. ⟨10.1016/j.matchar.2025.115920⟩ Article dans une revue emse-05483396v1
Strain rate sensitivity of a Cu/Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt; multi-layered thin film Szilvia Kalácska,Laszlo Pethö,Guillaume Kermouche,Johann Michler,Péter Dusán Ispánovity Surface and Coatings Technology, 2025, 498, pp.131817. ⟨10.1016/j.surfcoat.2025.131817⟩ Article dans une revue emse-04980740v1
Extending nanoindentation testing toward extreme strain rates and temperatures for probing materials evolution at the nanoscale Benoit Merle,Gabrielle Tiphéne,Guillaume Kermouche MRS Bulletin, 2025, 50 (6), pp.705-714. ⟨10.1557/s43577-025-00918-7⟩ Article dans une revue emse-05156852v1
Micromechanics reveal strain rate dependent transition between dislocation mechanisms in a dual phase high entropy alloy Szilvia Kalácska,Amit Sharma,Rajaprakash Ramachandramoorthy,Ádám Vida,Florian Tropperet al. Acta Materialia, 2025, 294, pp.121076. ⟨10.1016/j.actamat.2025.121076⟩ Article dans une revue emse-05097924v1
High temperature chromium coating cracking investigation during tensile tests monitored by acoustic emission Yanis Taïbi,Ali Charbal,Jean-Christophe Brachet,Elodie Rouesne,Sergio Sao Joaoet al. Journal of Nuclear Materials, 2025, 616, pp.156108. ⟨10.1016/j.jnucmat.2025.156108⟩ Article dans une revue emse-05238666v1
Phase transformation in Ce-Doped zirconia single and oligo-crystals: In-situ micro-compression with electron back-scattered diffraction analysis M.D. Magalhães,Szilvia Kalácska,Solène Comby-Dassonneville,Thierry Douillard,G. Huynhet al. Acta Materialia, 2025, 301, pp.121553. ⟨10.1016/j.actamat.2025.121553⟩ Article dans une revue emse-05291691v1
Extending nanoindentation testing toward extreme strain rates and temperatures for probing materials evolution at the nanoscale Benoit Merle,Gabrielle Tiphéne,Guillaume Kermouche MRS Bulletin, 2025, ⟨10.1557/s43577-025-00918-7⟩ Article dans une revue emse-05094087v1
Subsurface hardening of Al irradiated with ultrafast infrared laser Lucas Rousseau,Djafar Iabbaden,Xxx Sedao,Nathalie Peillon,Szilvia Kalácskaet al. Scripta Materialia, 2025, 255, pp.116404. ⟨10.1016/j.scriptamat.2024.116404⟩ Article dans une revue emse-04735002v1
A laser-based annealing methodology to speed-up the study of thermo-activated restoration mechanisms in metals Maxime Lemetais,Jean-Baptiste Pruvo,Marco Minissale,Alan Durif,Matthieu Lenciet al. Review of Scientific Instruments, 2025, 96 (6), pp.063508. ⟨10.1063/5.0202933⟩ Article dans une revue emse-05104972v1
Assessing the validity of micro-pillar compression for determining strength and stiffness of carbon fibres V. Keryvin,M. Ueda,G. Kermouche,Y. Marthouret,S. Sao-Joao Composites Science and Technology, 2025, 272, pp.111362. ⟨10.1016/j.compscitech.2025.111362⟩ Article dans une revue hal-05319095v1
Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films Andrey Orekhov,Nicolas Gauquelin,Guillaume Kermouche,Alejandro Gomez-Perez,Paul Baralet al. Acta Materialia, 2025, 282, pp.120479. ⟨10.1016/j.actamat.2024.120479⟩ Article dans une revue emse-04750122v1
Elasticity, Plasticity, and Fracture Toughness of REBCO Coated Conductors Characterized via Micromechanical Tests at Room Temperature G. Vernassa,M. Rusinowicz,Szilvia Kalácska,S. Sao-Joao,L. Botturaet al. IEEE Transactions on Applied Superconductivity, 2025, 35 (5), pp.1-7. ⟨10.1109/TASC.2025.3530382⟩ Article dans une revue emse-05387410v1
Electric charges as an apparent governing parameter for electron induced stress relaxation in amorphous silica micropillars Morgan Rusinowicz,Sergio Sao Joao,Matthieu Bourguignon,Gustavo Rosales-Sosa,Yoshinari Katoet al. Scripta Materialia, 2025, 261, pp.116628. ⟨10.1016/j.scriptamat.2025.116628⟩ Article dans une revue emse-04973875v1
Corrosion behaviour of Alloy 600 containing oxide inclusions exposed to primary water of pressurised water reactors Colette Perez,Thierry Couvant,Vincent Guipont,Guillaume Kermouche,David Balloyet al. Corrosion Science, 2025, 254, pp.113035. ⟨10.1016/j.corsci.2025.113035⟩ Article dans une revue emse-05121148v1
Dynamic Ultrafast Laser-Induced Structural Changes and Extreme Nanostructuring in Hard Dielectric Materials Rajeev Dwivedi,Huu Dat Nguyen,Sergio Sao Joao,Anne-Magali Seydoux-Guillaume,Thirunaukkarasu Kuppanet al. ACS photonics, 2025, 12 (7), pp.3644-3652. ⟨10.1021/acsphotonics.5c00554⟩ Article dans une revue emse-05157075v1
Nucleation of recrystallization: A new approach to consider the evolution of the substructure in the system Louis Hennocque,Julien Favre,Nicolas Meyer,Thomas Sourisseau,David Piotet al. Materialia, 2024, 38, pp.102301. ⟨10.1016/j.mtla.2024.102301⟩ Article dans une revue emse-04832030v1
Effect of oxygen dissolution on the mechanical behavior of thin Ti-6Al-4V specimens oxidized at high temperature: Experimental and modelling approach Damien Texier,Abhishek Palchoudhary,J. Genée,Quentin Sirvin,Yinyin Zhanget al. Corrosion Science, 2024, 235, pp.112177. ⟨10.1016/j.corsci.2024.112177⟩ Article dans une revue hal-04601530v1
Substructure heterogeneity during hot deformation of ferritic stainless steels - Experimental characterization and discussion assisted by a mean-field model Louis Hennocque,Julien Favre,Nicolas Meyer,Thomas Sourisseau,David Piotet al. Materials Science and Engineering: A, 2024, 906, pp.146335. ⟨10.1016/j.msea.2024.146335⟩ Article dans une revue emse-04594204v1
Update of the HTSI method: Application to the characterization of mechanical properties of CaF&lt;sub&gt;2&lt;/sub&gt; from RT to 800°C Gabrielle Tiphéne,Benedicte Adogou,Gaylord Guillonneau,Guillaume Kermouche,Jean-Michel Bergheauet al. Journal of Materials Research, 2024, ⟨10.1557/s43578-024-01466-7⟩ Article dans une revue emse-04795120v1
Wedge indentation of elastoplastic solids — from single indentation to interaction between indenters Yvan Marthouret,Tony Zaouter,Florent Ledrappier,Guillaume Kermouche Journal of Theoretical, Computational and Applied Mechanics, 2024, ⟨10.46298/jtcam.8945⟩ Article dans une revue hal-03517125v7
Quantitative mapping of transient thermodynamic states in ultrafast laser nanostructuring of quartz Huu Dat Nguyen,Arshak Tsaturyan,Sergio Sao Joao,Rajeev Dwivedi,Aram Melkonyanet al. Ultrafast Science, 2024, 4, pp.0056. ⟨10.34133/ultrafastscience.0056⟩ Article dans une revue emse-04380253v1
Compressive behaviour of carbon fibres micropillars by in situ SEM nanocompression T.S. Guruprasad,Vincent Keryvin,Guillaume Kermouche,Yvan Marthouret,Sergio Sao Joao Composites Part A: Applied Science and Manufacturing, 2023, 173, pp.107699. ⟨10.1016/j.compositesa.2023.107699⟩ Article dans une revue emse-04171824v1
Investigating the effect of tungsten initial microstructure on restoration kinetics using a mean field model Maxime Lemetais,Alan Durif,David Piot,Matthieu Lenci,Marianne Richouet al. Fusion Engineering and Design, 2023, 194, pp.113708. ⟨10.1016/j.fusengdes.2023.113708⟩ Article dans une revue emse-04103469v1
Quantification of softening kinetics in cold-rolled pure aluminum and copper using high-temperature scanning indentation Gabrielle Tiphéne,Guillaume Kermouche,Paul Baral,Claire Maurice,Gaylord Guillonneauet al. Materials & Design, 2023, pp.112171. ⟨10.1016/j.matdes.2023.112171⟩ Article dans une revue emse-04170743v1
Multi-scale in-situ micro-mechanical characterization of Polymer Core Solder Ball (PCSB) coatings for BGA interconnections Irati Malkorra,Sergio Sao Joao,U. Costa,D. Chalavoux,S. Bucheret al. Microelectronics Reliability, 2023, 148, pp.115135. ⟨10.1016/j.microrel.2023.115135⟩ Article dans une revue emse-04186045v1
Temperature gradient based annealing methodology for tungsten recrystallization kinetics assessment Maxime Lemetais,Matthieu Lenci,Claire Maurice,Timothée Devictor,Alan Durifet al. Fusion Engineering and Design, 2023, 193, pp.113785. ⟨10.1016/j.fusengdes.2023.113785⟩ Article dans une revue emse-04102806v1
3D Numerical modelling of residual stresses induced in finish turning of a fillet radius on a shaft made of 15-5PH Maxime Dumas,Dorian Fabre,Frédéric Valiorgue,Guillaume Kermouche,Bertrand Truffartet al. Procedia CIRP, 2023, 117, pp.122 à 127. ⟨10.1016/j.procir.2023.03.022⟩ Article dans une revue emse-04103988v1
On the Application of some Plasticity Laws Louis Hennocque,Julien Favre,Nicolas Meyer,Thomas Sourisseau,Claire Mauriceet al. Solid State Phenomena, 2023, 353, pp.163 - 168. ⟨10.4028/p-SXs81M⟩ Article dans une revue emse-04401025v1
Le verre : fragile ou ductile ? Étienne Barthel,Thierry Deschamps,Guillaume Kermouche,Christine Martinet,Gergely Molnáret al. Reflets de la Physique, 2022, 74, pp.46-51. ⟨10.1051/refdp/202274046⟩ Article dans une revue hal-03955403v1
Effect of ball-burnishing on hydrogen-assisted cracking of a martensitic stainless steel Alixe Dreano,Michella Alnajjar,Ferdinando Salvatore,Joël Rech,Cédric Boschet al. International Journal of Hydrogen Energy, 2022, 47 (96), pp.39654 à 39665. ⟨10.1016/j.ijhydene.2022.09.110⟩ Article dans une revue emse-03908445v1
Plastic Flow Under Shear-Compression at the Micron Scale-Application on Amorphous Silica at High Strain Rate Gaylord Guillonneau,Sergio Sao Joao,Benedicte Adogou,Simon Breumier,Guillaume Kermouche JOM Journal of the Minerals, Metals and Materials Society, 2022, 74 (6), pp.2231-2237. ⟨10.1007/s11837-021-05142-7⟩ Article dans une revue hal-03734993v1
Competition between recovery and recrystallization in two tungsten supplies according to ITER specifications A. Durif,D. Piot,Marianne Richou,L. Gallais,M. Lemetaiset al. Journal of Materials Science, 2022, 57 (15), pp.7729-7746. ⟨10.1007/s10853-022-07123-w⟩ Article dans une revue hal-03751029v1
FIB-SEM based 3D tomography of micro-electronic components: Application to automotive high-definition LED lighting systems Safa Nocairi,Nicolas Compère,Antonin Bermond,Christine Roucoules,Sergio Sao Joaoet al. Microelectronics Reliability, 2022, 137, pp.114749. ⟨10.1016/j.microrel.2022.114749⟩ Article dans une revue hal-03782555v1
Temperature–dependent dynamic plasticity of micro-scale fused silica Remo N. Widmer,Alexander Groetsch,Guillaume Kermouche,Ana Diaz,Gilles Pillonelet al. Materials & Design, 2022, 215, pp.110503. ⟨10.1016/j.matdes.2022.110503⟩ Article dans une revue hal-03728557v1
T-REX: Numerical tool for tungsten damage assessment for DEMO Alan Durif,Marianne Richou,Jean-Michel Bergheau,Laurent Gallais,Guillaume Kermoucheet al. Journal of Nuclear Materials, 2022, 569, pp.153906. ⟨10.1016/j.jnucmat.2022.153906⟩ Article dans une revue emse-04585050v1
Bioclogging in Porous Media: Effect of the Presence of Clay Hanène Souli,Jean-Marie Fleureau,Tahani Farah,Guillaume Kermouche,Jean-Jacques Fryet al. Indian Geotechnical Journal, 2022, 52 (2), pp.315 à 327. ⟨10.1007/s40098-021-00569-w⟩ Article dans une revue hal-03735806v1
Automotive optoelectronic components submitted to thermal shock: Impact of component architecture on mechanical reliability Safa Nocairi,Khalil Maarouf,Christine Roucoules,Guillaume Kermouche,Sergio Sao Joaoet al. Microelectronics Reliability, 2022, 128, pp.114422. ⟨10.1016/j.microrel.2021.114422⟩ Article dans une revue hal-03730392v1
Turning-induced surface integrity for a fillet radius in a 316L austenitic stainless steel Maxime Dumas,Guillaume Kermouche,Frédéric Valiorgue,Alexis van Robaeys,Fabien Lefebvreet al. Journal of Manufacturing Processes, 2021, 68, Part A, pp.222 à 230. ⟨10.1016/j.jmapro.2021.05.031⟩ Article dans une revue emse-03789764v1
Real-time high-temperature scanning indentation: Probing physical changes in thin-film metallic glasses Solene Comby-Dassonneville,Gabrielle Tiphene,Alejandro Borroto,Gaylord Guillonneau,Lucian Roibanet al. Applied Materials Today, 2021, 24, pp.101126. ⟨10.1016/j.apmt.2021.101126⟩ Article dans une revue hal-03484851v1
Numerical study of the influence of tungsten recrystallization on the divertor component lifetime Alan Durif,Marianne Richou,Guillaume Kermouche,Jean-Michel Bergheau International Journal of Fracture, 2021, 230 (1), pp.83 à 98. ⟨10.1007/s10704-021-00568-1⟩ Article dans une revue emse-04585151v1
High-Temperature Scanning Indentation: A new method to investigate in situ metallurgical evolution along temperature ramps Gabrielle Tiphéne,Paul Baral,Solène Comby-Dassonneville,Gaylord Guillonneau,Guillaume Kermoucheet al. Journal of Materials Research, 2021, 36 (12), pp.2383-2396. ⟨10.1557/s43578-021-00107-7⟩ Article dans une revue hal-03214795v1
Microstructural and mechanical characterization of a shot peening induced rolled edge on direct aged Inconel 718 alloy S. Breumier,Frédéric Adamski,J. Badreddine,M. Lévesque,Guillaume Kermouche Materials Science and Engineering: A, 2021, 816, pp.141318. ⟨10.1016/j.msea.2021.141318⟩ Article dans une revue emse-04648007v1
Grain growth and damages induced by transient heat loads on W Marco Minissale,Alan Durif,Guillaume Kermouche,Marianne Richou,Laurent Gallais Physica Scripta, 2021, 96, pp.124032. ⟨10.1088/1402-4896/ac27df⟩ Article dans une revue hal-03357224v1
An Attempt to Assess Recovery/Recrystallization Kinetics in Tungsten at High Temperature Using Statistical Nanoindentation Analysis Liz Karanja,Matthieu Lenci,David Piot,Claire Maurice,Alan Durifet al. Crystals, 2021, 11 (1), pp.37. ⟨10.3390/cryst11010037⟩ Article dans une revue hal-03214794v1
Controlled single and repeated impact testing for material plastic behaviour characterisation under high strain rates S. Breumier,Francis Trudeau-Lalonde,Thierry Lafrance,Etienne Robert,Aurélien Villaniet al. Strain, 2021, 57 (6), pp.e12399. ⟨10.1111/str.12399⟩ Article dans une revue emse-03789870v1
3D numerical modelling of turning-induced residual stresses – A two-scale approach based on equivalent thermo-mechanical loadings Maxime Dumas,Dorian Fabre,Frédéric Valiorgue,Guillaume Kermouche,Alexis van Robaeyset al. Journal of Materials Processing Technology, 2021, 297, pp.117274. ⟨10.1016/j.jmatprotec.2021.117274⟩ Article dans une revue emse-03788474v1
Indentation cracking in silicate glasses is directed by shear flow, not by densification Etienne Barthel,Vincent Keryvin,Gustavo Rosales-Sosa,Guillaume Kermouche Acta Materialia, 2020, 194, pp.473-481. ⟨10.1016/j.actamat.2020.05.011⟩ Article dans une revue hal-02861295v1
High strain rate micro-compression for crystal plasticity constitutive law parameters identification S. Breumier,S. Sao-Joao,A. Villani,M. Lévesque,G. Kermouche Materials & Design, 2020, 193, pp.108789. ⟨10.1016/j.matdes.2020.108789⟩ Article dans une revue hal-03214798v1
Extrinsic Measurement of Carbon Black Aggregate Distribution within a Fluoroelastomer Matrix from Nanoindentation Experiments Paul Baral,C. Fradet,Florian Lacroix,Éric Le Bourhis,Gaylord Guillonneauet al. ACS Applied Materials & Interfaces, 2020, 12 (5), pp.6716-6726. ⟨10.1021/acsami.9b20286⟩ Article dans une revue emse-04511430v1
Real time imaging of strain fields induced by the ferrite-to-austenite transformation in high purity iron Nicolas Bruzy,Michel Coret,Bertrand Huneau,Laurent Stainier,Christophe Denoualet al. Materials Today Communications, 2020, 24, pp.101028. ⟨10.1016/j.mtcomm.2020.101028⟩ Article dans une revue hal-02864828v1
Evolution of the surface integrity while turning a fillet radius in a martensitic stainless steel 15-5PH M. Dumas,Frédéric Valiorgue,G. Kermouche,A. Van Robaeys,U. Masciantonioet al. Procedia CIRP, 2020, 87, pp.101-106. ⟨10.1016/j.procir.2020.02.038⟩ Article dans une revue hal-03214797v1
Indentation creep vs. indentation relaxation: A matter of strain rate definition? Paul Baral,Guillaume Kermouche,Gaylord Guillonneau,Gabrielle Tiphéne,Jean-Michel Bergheauet al. Materials Science and Engineering: A, 2020, 781, pp.139246. ⟨10.1016/j.msea.2020.139246⟩ Article dans une revue emse-04511474v1
Microstructural evolution and mechanical properties of ultrafine-grained pure α-iron and Fe-0.02%C steel processed by high-pressure torsion: Influence of second-phase particles Yinyin Zhang,Sergio Sao-Joao,Sylvie Descartes,Guillaume Kermouche,Frank Montheilletet al. Materials Science and Engineering: A, 2020, 795, pp.139915. ⟨10.1016/j.msea.2020.139915⟩ Article dans une revue hal-02927805v1
Correlation between microstructural gradient and microindentation properties of dissimilar weld between INCONEL 625 and Duplex Stainless Steel Ammar Chabbi,Mabrouk Bouabdallah,Sergio Sao-Joao,Achraf Boudiaf,Guillaume Kermouche Metallurgical Research & Technology, 2020, 117 (4), pp.407. ⟨10.1051/metal/2020035⟩ Article dans une revue istex hal-03214796v1
A high power laser facility to conduct annealing tests at high temperature M. Minissale,A. Durif,P. Hiret,Thierry Vidal,J. Faucheuxet al. Review of Scientific Instruments, 2020, 91 (3), pp.035102. ⟨10.1063/1.5133741⟩ Article dans une revue hal-03164162v1
Highlighting the impact of shear strain on the SiO 2 glass structure: From experiments to atomistic simulations Christine Martinet,Manon Heili,Valérie Martinez,Guillaume Kermouche,Gergely Molnaret al. Journal of Non-Crystalline Solids, 2020, 533, pp.119898. ⟨10.1016/j.jnoncrysol.2020.119898⟩ Article dans une revue hal-02869331v1
Recrystallization at high temperature of two tungsten materials complying with the ITER specifications M. Richou,A. Durif,M. Lenci,M. Mondon,M. Minissaleet al. Journal of Nuclear Materials, 2020, 542, pp.152418. ⟨10.1016/j.jnucmat.2020.152418⟩ Article dans une revue hal-03164252v1
Mesoscopic Strain Fields Measurement During the Allotropic α − γ Transformation in High Purity Iron Nicolas Bruzy,Michel Coret,Bertrand Huneau,Guillaume Kermouche,Marilyne Mondonet al. Experimental Mechanics, 2019, 59 (8), pp.1145-1157. ⟨10.1007/s11340-019-00525-z⟩ Article dans une revue hal-02317370v2
Performance assessment of high heat flux W monoblock type target using thin graded and copper interlayers for application to DEMO divertor M. Richou,F. Gallay,B. Böswirth,I. Chu,G. Doseet al. Fusion Engineering and Design, 2019, 146 (Part A), pp.858-861. ⟨10.1016/j.fusengdes.2019.01.098⟩ Article dans une revue emse-02892829v1
Influence of Cold Spray Nozzle Displacement Strategy on Microstructure and Mechanical Properties of Cu/SiC Composites Coating Olga Matts,Hussein Hammoud,Alexey Sova,Zineb Bensaid,Guillaume Kermoucheet al. Key Engineering Materials, 2019, 813, pp.110-115. ⟨10.4028/www.scientific.net/KEM.813.110⟩ Article dans une revue emse-02892779v1
Impact of tungsten recrystallization on ITER-like components for lifetime estimation Alan Durif,Marianne Richou,G. Kermouche,Matthieu Lenci,Jean-Michel Bergheau Fusion Engineering and Design, 2019, 138, pp.247-253. ⟨10.1016/j.fusengdes.2018.11.003⟩ Article dans une revue emse-02892621v1
Near surface transformations of stainless steel cold spray and laser cladding deposits after turning and ball-burnishing C. Courbon,A. Sova,F. Valiorgue,H. Pascal,J. Sijobertet al. Surface and Coatings Technology, 2019, 371, pp.235-244. ⟨10.1016/j.surfcoat.2019.01.092⟩ Article dans une revue emse-02888162v1
Inverse identification of tungsten static recrystallization kinetics under high thermal flux Alan Durif,M. Richou,G. Kermouche,Jean Michel Bergheau Fusion Engineering and Design, 2019, 146, pp.1759-1763. ⟨10.1016/j.fusengdes.2019.02.141⟩ Article dans une revue emse-02890953v1
Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation S. Breumier,A. Villani,C. Maurice,M. Levesque,G. Kermouche Materials & Design, 2019, 169, pp.107659. ⟨10.1016/j.matdes.2019.107659⟩ Article dans une revue hal-02411714v1
A new long-term indentation relaxation method to measure creep properties at the micro-scale with application to fused silica and PMMA P. Baral,G. Guillonneau,G. Kermouche,J.-M. Bergheau,J.-L. Loubet Mechanics of Materials, 2019, 137, pp.103095. ⟨10.1016/j.mechmat.2019.103095⟩ Article dans une revue hal-02389797v1
Effects of micro-knurling and femtosecond laser micro texturing on aluminum long-term surface wettability Synthia Divin-Mariotti,Pierrick Amieux,Alina Pascale-Hamri,Virginie Auger,Guillaume Kermoucheet al. Applied Surface Science, 2019, 479, pp.344-350. ⟨10.1016/j.apsusc.2019.02.025⟩ Article dans une revue emse-02890893v1
In situ characterization of AA1050 recrystallization kinetics using high temperature nanoindentation testing Paul Baral,Mathilde Laurent-Brocq,Gaylord Guillonneau,Jean-Michel Bergheau,Jean-Luc Loubetet al. Materials & Design, 2018, 152, pp.22-29. ⟨10.1016/j.matdes.2018.04.053⟩ Article dans une revue emse-02007638v1
A semitopological mean-field model of discontinuous dynamic recrystallization David Piot,Guillaume Smagghe,John Joseph Jonas,Christophe Desrayaud,Frank Montheilletet al. Journal of Materials Science, 2018, Metals, 53 (11), pp.8554-8566. ⟨10.1007/s10853-018-2137-3⟩ Article dans une revue emse-02008506v1
Experimental study of wear-induced delamination for DLC coated automotive components Antonios Choleridis,Sergio Sao-Joao,Jihane Ben-Mohamed,David Chern,Vincent Barnieret al. Surface and Coatings Technology, 2018, 352, pp.549 - 560. ⟨10.1016/j.surfcoat.2018.08.048⟩ Article dans une revue istex hal-01862173v1
Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron David Tumbajoy Spinel,Xavier Maeder,G Guillonneau,S. Sao-Jao,Sylvie Descarteset al. Materials & Design, 2018, ⟨10.1016/j.matdes.2018.03.014⟩ Article dans une revue istex hal-01864702v1
Combination of mechanical and chemical pre-treatments to improve nitriding efficiency on pure iron Victor Lacaille,Véronique Peres,Cécile Langlade,Constance Morel,Eric Feulvarchet al. Applied Surface Science, 2017, 414, pp.73-81. ⟨10.1016/j.apsusc.2017.04.084⟩ Article dans une revue hal-01522817v1
Theoretical and experimental analysis of indentation relaxation test Paul Baral,Gaylord Guillonneau,Guillaume Kermouche,Jean-Michel Bergheau,Jean-Luc Loubet Journal of Materials Research, 2017, 32 (12), pp.2286-2296. ⟨10.1557/jmr.2017.203⟩ Article dans une revue hal-02389822v1
Investigation of graded strengthened hyper-deformed surfaces by impact treatment: micro-percussion testing David Tumbajoy-Spinel,Sylvie Descartes,Jean-Michel Bergheau,Halim Al-Baida,Cécile Langladeet al. IOP Conference Series: Materials Science and Engineering, 2017, 194, pp.012024. ⟨10.1088/1757-899X/194/1/012024⟩ Article dans une revue hal-02436498v1
Plastic response of amorphous silicates, from atomistic simulations to experiments – A general constitutive relation Gergely Molnar,Guillaume Kermouche,Etienne Barthel Mechanics of Materials, 2017, 114, pp.1-8. ⟨10.1016/j.mechmat.2017.07.002⟩ Article dans une revue hal-02132502v1
Assessment of mechanical property gradients after impact-based surface treatment: application to pure alpha-iron David Tumbajoy-Spinel,Sylvie Descartes,Jean-Michel Bergheau,Victor Lacaille,Gaylord Guillonneauet al. Materials Science and Engineering: A, 2016, 667, pp.189-198. ⟨10.1016/j.msea.2016.04.059⟩ Article dans une revue emse-01505794v1
Impact of pressure on plastic yield in amorphous solids with open structure E. Mantisi,G. Kermouche,E. Barthel,A. Tanguy Physical Review E , 2016, 93, pp.33001 - 33001. ⟨10.1103/PhysRevE.93.033001⟩ Article dans une revue hal-01394099v1
Densification dependent yield criteria for sodium silicate glasses - An atomistic simulation approach Gergely Molnar,Patrick Ganster,Anne Tanguy,Etienne Barthel,Guillaume Kermouche Acta Materialia, 2016, 111, pp.129-137. ⟨10.1016/j.actamat.2016.03.053⟩ Article dans une revue emse-01353610v1
Durability of bioclogging treatment of soils Tahani Farah,Hanène Souli,Jean-Marie Fleureau,Guillaume Kermouche,Jean-Jacques Fryet al. Journal of Geotechnical and Geoenvironmental Engineering, 2016, 142 (Issue : 9; Article Number : 04016040 ), ⟨10.1061/(ASCE)GT.1943-5606.0001503⟩ Article dans une revue hal-01342068v1
Perfectly plastic flow in silica glass G. Kermouche,G. Guillonneau,J. Michler,J. Teisseire,E. Barthel Acta Materialia, 2016, 114, pp.146 - 153. ⟨10.1016/j.actamat.2016.05.027⟩ Article dans une revue hal-01393682v1
Transition from ductile to brittle failure of sodium silicate glasses: a numerical study Gergely Molnar,Patrick Ganster,Anne Tanguy,János Török,Guillaume Kermouche MRS Advances, 2016, 1 (24), pp.1797-1802. ⟨10.1557/adv.2016.166⟩ Article dans une revue hal-02132519v1
Transformation par forgeage à chaud des microstructures lamellaires d’alliages hexagonaux Michel Darrieulat,Frank Montheillet,David Piot,Guillaume Kermouche,Christophe Desrayaud Matériaux et Techniques, 2015, 103 (5), pp.504. ⟨10.1051/mattech/2015037⟩ Article dans une revue istex hal-02025690v1
Identification des propriétés mécaniques des surfaces tribologiquement transformées (TTS) à partir des essais de nano-indentation et micro-compression de piliers David Tumbajoy-Spinel,Guillaume Kermouche,Sylvie Descartes,Jean-Michel Bergheau,Victor Lacailleet al. Matériaux et Techniques, 2015, Comportements mécaniques : approches expérimentales et modélisations à différentes échelles, 103, ⟨10.1051/mattech/2015020⟩ Article dans une revue hal-01998746v1
A new method to determine the true projected contact area using nanoindentation testing Gaylord Guillonneau,Guillaume Kermouche,Jean-Michel Bergheau,Jean-Luc Loubet Comptes Rendus. Mécanique, 2015, 343 (Issue : 7-8), pp.410-418. ⟨10.1016/j.crme.2015.06.004⟩ Article dans une revue emse-01500778v1
Original test device for crack propagation in the weld nugget of advanced high strength steels Rémi Lacroix,Guillaume Kermouche,Arnaud Lens,Jean-Michel Bergheau,Helmut Klöcker Engineering Fracture Mechanics, 2015, 138, pp.156-168. ⟨10.1016/j.engfracmech.2015.02.022⟩ Article dans une revue emse-01500896v1
Investigation of indentation-, impact- and scratch-induced mechanically affected zones in a copper single crystal Pierre Juran,Pierre-Jacques Liotier,Claire Maurice,Frederic Valiorgue,Guillaume Kermouche Comptes Rendus. Mécanique, 2015, 343 (5-6), pp.344-353. ⟨10.1016/j.crme.2015.03.003⟩ Article dans une revue istex emse-01352766v1
Development of an improved method for identifying material stress-strain curve using repeated micro-impact testing H. Al Baïda,Guillaume Kermouche,C. Langlade Mechanics of Materials, 2015, 86, pp.11-20. ⟨10.1016/j.mechmat.2015.02.009⟩ Article dans une revue emse-01499477v1
Identifying the stress-strain curve of materials by microimpact testing. Application on pure copper, pure iron, and aluminum alloy 6061-T651 Halim Al Baïda,Cécile Langlade,Guillaume Kermouche,R.R. Ambriz Journal of Materials Research, 2015, 30 (14), pp.2222-2230. ⟨10.1557/jmr.2015.186⟩ Article dans une revue emse-01499521v1
Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation? G Guillonneau,G Kermouche,J Teisseire,E Barthel,Sandrine Becet al. Philosophical Magazine, 2015, pp.1013517. ⟨10.1080/14786435.2015.1013517⟩ Article dans une revue hal-01111329v1
A simple method to minimize displacement measurement uncertainties using dynamic nanoindentation testing Gaylord Guillonneau,Guillaume Kermouche,Sandrine Bec,Jean-Luc Loubet Tribology International, 2014, 70, pp.190-198. ⟨10.1016/j.triboint.2013.10.013⟩ Article dans une revue emse-01161450v1
Hydrogen effect on dislocation nucleation in a ferritic alloy Fe-15Cr as observed per nanoindentation Gaspard Vincent,Guillaume Kermouche,David Delafosse,Afrooz Barnoush Materials Science and Engineering: A, 2014, 604, pp.86-91. ⟨10.1016/j.msea.2014.02.041⟩ Article dans une revue emse-00989488v1
Finite element analysis of the grain size effect on diffusion in polycrystalline materials Victor Lacaille,C. Morel,Eric Feulvarch,Guillaume Kermouche,Jean-Michel Bergheau Computational Materials Science, 2014, 95, pp.187-191. ⟨10.1016/j.commatsci.2014.07.026⟩ Article dans une revue emse-01498591v1
Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties Salim Lamri,C. Langlade,Guillaume Kermouche Materials Science and Engineering: A, 2013, 560, pp.296-305. ⟨10.1016/j.msea.2012.09.070⟩ Article dans une revue emse-01011601v1
Viscoelastic-Viscoplastic Modelling of the Scratch Response of PMMA Guillaume Kermouche,Nicolas Aleksy,Jean-Michel Bergheau Advances in Materials Science and Engineering, 2013, 2013, pp.article ID289698. ⟨10.1155/2013/289698⟩ Article dans une revue emse-00942952v1
Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing Guillaume Kermouche,F. Grange,C. Langlade Materials Science and Engineering: A, 2013, 569, pp.71-77. ⟨10.1016/j.msea.2013.01.020⟩ Article dans une revue emse-01011578v1
Raman Mapping of the Indentation-Induced Densification of a Soda-Lime-Silicate Glass Assia Kassir-Bodon,Thierry Deschamps,Christine Martinet,Bernard Champagnon,Jérémie Teisseireet al. International Journal of Applied Glass Science, 2012, pp.1-7 (2012). ⟨10.1111/j.2041-1294.2012.00078.x⟩ Article dans une revue hal-00672585v1
Micro-pillar testing of amorphous silica Rémi Lacroix,Vincent Chomienne,G. Kermouche,J. Teisseire,S. Questeet al. International Journal of Applied Glass Science, 2012, 3 (1), pp.36-43. ⟨10.1111/j.2041-1294.2011.00075.x⟩ Article dans une revue hal-00677258v1
Determination of mechanical properties by nanoindentation independently of indentation depth measurement Gaylord Guillonneau,Guillaume Kermouche,Sandrine Bec,Jean-Luc Loubet Journal of Materials Research, 2012, 27, pp.2551-2560. ⟨10.1557/jmr.2012.261⟩ Article dans une revue hal-00826308v1
Atomistic response of a model silica glass under shear and pressure B. Mantisi,Arnaud Tanguy,G. Kermouche,E. Barthel The European Physical Journal B: Condensed Matter and Complex Systems, 2012, 85 (9), pp.85:304. ⟨10.1140/epjb/e2012-30317-6⟩ Article dans une revue hal-00731348v1
Plastic deformation and residual stresses in amorphous silica pillars under uniaxial loading R. Lacroix,G. Kermouche,J. Teisseire,E. Barthel Acta Materialia, 2012, 60 (15), pp.5555-5566. ⟨10.1016/j.actamat.2012.07.016⟩ Article dans une revue hal-00746956v1
On the plastic deformation of soda-lime glass - a Cr3+ luminescence study of densification Antoine Perriot,Etienne Barthel,Guillaume Kermouche,Gilles Querel,Damien Vandembroucq Philosophical Magazine, 2011, 91 (7-9), pp.1245-1255. ⟨10.1080/14786435.2010.491808⟩ Article dans une revue hal-00495337v1
Numerical study of scratch velocity effect on recovery of viscoelastic-viscoplastic solids Nicolas Aleksy,Guillaume Kermouche,Alain Vautrin,Jean-Michel Bergheau International Journal of Mechanical Sciences, 2010, 52 (3), pp.455-463. ⟨10.1016/j.ijmecsci.2009.11.006⟩ Article dans une revue hal-00850009v1
Mechanical modeling of indentation-induced densification in amorphous silica Guillaume Kermouche,Etienne Barthel,D. Vandembroucq,Philippe Dubujet Acta Materialia, 2008, 56 (13), pp.3222-3228 Article dans une revue hal-00260324v1
A new index to estimate the strain rate sensitivity of glassy polymers using conical/pyramidal indentation Guillaume Kermouche,Jean-Luc Loubet,Jean-Michel Bergheau Philosophical Magazine, 2006, 86 (33-35), pp.5667-5677. ⟨10.1080/14786430600778682⟩ Article dans une revue hal-00513712v1

Chapitre d'ouvrage (2)

23 - Nanomechanics of tribologically transformed surfaces Guillaume Kermouche,Gaylord Guillonneau Nanomechanics for Coatings and Engineering Surfaces, Elsevier, pp.647-674, 2025, 9780443133343. ⟨10.1016/B978-0-443-13334-3.00023-1⟩ Chapitre d'ouvrage emse-04997751v1
Nanomechanics of tribologically transformed surfaces Guillaume Kermouche,Gaylord Guillonneau NANOMECHANICS FOR COATINGS AND ENGINEERING SURFACES - Test Methods, Development Strategies, Modeling Approaches, and Application, Elsevier - Health Sciences Division, section IV, chapitre 23, pp. 647 à 669, 2024, 978-0-443-13334-3 Chapitre d'ouvrage emse-04884214v1