Jean-Christophe QUANTIN

47
Documents

Publications

Publications

Deposit thumbnail

Recycled carbon fiber potential for reuse in carbon fiber/PA6 composite parts

Louis Jeantet , Arnaud Regazzi , Didier Perrin , Monica Francesca Pucci , Stéphane Corn et al.

Composites Part B: Engineering, 2024, 269, pp.111100. ⟨10.1016/j.compositesb.2023.111100⟩

Article dans une revue hal-04279630v1
Deposit thumbnail

Influence of Polymer Processing on the Double Electrical Percolation Threshold in PLA/PCL/GNP Nanocomposites

Nour-Alhoda Masarra , Jean-Christophe Quantin , Marcos Batistella , Roland El Hage , Monica Francesca Pucci et al.

Sensors, 2022, 22 (23), pp.9231. ⟨10.3390/s22239231⟩

Article dans une revue hal-03880293v1
Deposit thumbnail

Fabrication of PLA/PCL/Graphene Nanoplatelet (GNP) Electrically Conductive Circuit Using the Fused Filament Fabrication (FFF) 3D Printing Technique

Nour-Alhoda Masarra , Marcos Batistella , Jean‐christophe Quantin , Arnaud Regazzi , Monica Francesca Pucci et al.

Materials, 2022, 15 (3), pp.762. ⟨10.3390/ma15030762⟩

Article dans une revue hal-03536661v1
Deposit thumbnail

Biopolymer blends for mechanical property gradient 3D printed parts

L. Jeantet , Arnaud Regazzi , A. Taguet , Monica Francesca Pucci , A. S. Caro-Bretelle et al.

Express Polymer Letters, 2021, 15 (2), pp.137-152. ⟨10.3144/expresspolymlett.2021.13⟩

Article dans une revue hal-03035297v1
Deposit thumbnail

Effect of recycling and injection parameters on gloss properties of smooth colored polypropylene parts: Contribution of surface and skin layer

Souad Mbarek , Zaineb Baccouch , Olivier Eterradossi , Didier Perrin , Bernard Monasse et al.

Polymer Engineering and Science, 2019, 59 (6), pp.1288-1299. ⟨10.1002/pen.25112⟩

Article dans une revue hal-02424756v1
Deposit thumbnail

Functionalized nanodiamond as potential synergist in flame-retardant ethylene vinyl acetate

Charlene Presti , Laurent Ferry , Johan Alauzun , Loic Dumazert , Benjamin Gallard et al.

Diamond and Related Materials, 2017, 76, pp.141-149. ⟨10.1016/j.diamond.2017.05.002⟩

Article dans une revue hal-01539575v1
Deposit thumbnail

Morphological characterization and thermal properties of compatibilized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/poly(butylene succinate) (PBS)/halloysite ternary nanocomposites

Salima Kennouche , Nicolas Le Moigne , Mustapha Kaci , Jean-Christophe Quantin , Anne-Sophie Caro-Bretelle et al.

European Polymer Journal, 2016, 75, pp.142-162. ⟨10.1016/j.eurpolymj.2015.12.009⟩

Article dans une revue hal-02906421v1
Deposit thumbnail

Chemical foaming extrusion of poly(lactic acid) with chain-extenders: Physical and morphological characterizations

J.M. Julien , J.-C. Quantin , J.-C. Bénézet , A. Bergeret , M.F. Lacrampe et al.

European Polymer Journal, 2015, 67, pp.40-49. ⟨10.1016/j.eurpolymj.2015.03.011⟩

Article dans une revue hal-01773179v1
Deposit thumbnail

Modelling of PLA melt rheology and batch mixing energy balance

Pierre Erwan Le Marec , Jean-Christophe Quantin , Laurent Ferry , Jean-Charles Benezet , Stéphane Guilbert et al.

European Polymer Journal, 2014, 60, pp.273-285. ⟨10.1016/j.eurpolymj.2014.09.012⟩

Article dans une revue hal-01268917v1
Deposit thumbnail

Influence of melt processing conditions on poly(lactic acid) degradation: Molar mass distribution and crystallization

Pierre Erwan Le Marec , Laurent Ferry , Jean Christophe Quantin , Jean Charles Benezet , Frédéric Bonfils et al.

Polymer Degradation and Stability, 2014, 110, pp.353-363. ⟨10.1016/j.polymdegradstab.2014.10.003⟩

Article dans une revue hal-01268920v1
Deposit thumbnail

Development of poly(lactic acid) cellular materials: Physical and morphological characterizations

J.-M. Julien , J.-C. Bénézet , E. Lafranche , J.-C. Quantin , A. Bergeret et al.

Polymer, 2012, 53 (25), pp.5885 - 5895. ⟨10.1016/j.polymer.2012.10.005⟩

Article dans une revue hal-01773160v1
Deposit thumbnail

Determination of the energy efficiency in mixing of PLA/cellulose biocomposites

P.E. Le Marec , J.-C. Bénézet , Laurent Ferry , Jean‐christophe Quantin , Marie Helene Morel et al.

Matériaux et Techniques, 2012, 100 (5), pp.437-449. ⟨10.1051/mattech/2012014⟩

Article dans une revue istex hal-03272192v1
Deposit thumbnail

Mechanical behaviour at large strain of polycarbonate nanocomposites during uniaxial tensile test

A. Christmann , Patrick Ienny , Jean‐christophe Quantin , A. S. Caro-Bretelle , J. Lopez-Cuesta

Polymer, 2011, 52 (18), pp.4033-4044. ⟨10.1016/j.polymer.2011.06.056⟩

Article dans une revue hal-03237558v1
Deposit thumbnail

Study of suspension settling: An approach to determine suspension classification and particle interactions

R. Vie , N. Azema , Jean‐christophe Quantin , E. Touraud , M. Fouletier

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2007, 298 (3), pp.192-200. ⟨10.1016/j.colsurfa.2006.10.074⟩

Article dans une revue hal-03181072v1
Deposit thumbnail

Characterisation of glass fibres used in automotive industry for SMC body panels

V. Feuillade , Anne Bergeret , Jean‐christophe Quantin , A. Crespy

Composites Part A: Applied Science and Manufacturing, 2006, 37 (10), pp.1536-1544. ⟨10.1016/j.compositesa.2005.11.010⟩

Article dans une revue hal-03247679v1
Deposit thumbnail

Relationships between the glass fibre sizing composition and the surface quality of sheet moulding compounds (SMC) body panels

V. Feuillade , Anne Bergeret , Jean‐christophe Quantin , A. Crespy

Composites Science and Technology, 2006, 66 (1), pp.115-127. ⟨10.1016/j.compscitech.2005.05.009⟩

Article dans une revue hal-03247695v1
Deposit thumbnail

Study of interphase in glass fiber-reinforced poly(butylene terephthalate) composites

Anne Bergeret , M. Bozec , Jean‐christophe Quantin , A. Crespy , J.-P. Gasca et al.

Polymer Composites, 2004, 25 (1), pp.12-25. ⟨10.1002/pc.20001⟩

Article dans une revue istex hal-03254744v1
Deposit thumbnail

Factors influencing viscoelastic properties of a poly (butylene terephthalate) reinforced with short glass fibers

O. Beaudoin , Anne Bergeret , Jean‐christophe Quantin , A. Crespy

Polymer Composites, 2002, 23 (1), pp.87-94. ⟨10.1002/pc.10414⟩

Article dans une revue istex hal-03254712v1
Deposit thumbnail

Determination of the microtexture of reinforced thermoplastics by image analysis

Luc Avérous , Jean‐christophe Quantin , A Crespy

Composites Science and Technology, 1998, 58 (3-4), pp.377-387. ⟨10.1016/S0266-3538(97)00125-5⟩

Article dans une revue istex hal-03114472v1
Deposit thumbnail

Evolution of the three-dimensional orientation distribution of glass fibers in injected isotactic polypropylene

Luc Avérous , Jean‐christophe Quantin , Alain Crespy , Dominique Lafon-Pham

Polymer Engineering and Science, 1997, 37 (2), ⟨10.1002/pen.11675⟩

Article dans une revue istex hal-03112117v1
Deposit thumbnail

Viscoelastic behaviour of glass beads reinforced poly(butylene terephthalate): experimental and theoretical approaches

O. Beaudoin , Anne Bergeret , Jean‐christophe Quantin , A. Crespy

Composite Interfaces , 1997, 5 (6), pp.543-559. ⟨10.1163/156855498X00063⟩

Article dans une revue hal-03660653v1
Deposit thumbnail

Morphological determinations of fiber composites

Luc Avérous , Jean‐christophe Quantin , Dominique Lafon-Pham , A Crespy

Microscopy, Microanalysis, Microstructures, 1996, 7 (5-6), ⟨10.1051/mmm:1996142⟩

Article dans une revue hal-03115889v1
Deposit thumbnail

Determination of 3D fiber orientations in reinforced thermoplastics, using scanning electron microscopy

Luc Averous , Jean‐christophe Quantin , Dominique Lafon-Pham , Alain Crespy

Acta Stereologica, 1995, 14 (1), pp.69-74

Article dans une revue hal-02927869v1
Deposit thumbnail

Granulometric Characterization of Short Fiberglass in Reinforced Polypropylene. Relation to Processing Conditions and Mechanical Properties

L. Avérous , Jean‐christophe Quantin , Dominique Lafon-Pham , A. Crespy

International Journal of Polymer Analysis and Characterization, 1995, 1 (4), pp.339-347. ⟨10.1080/10236669508233886⟩

Article dans une revue hal-02927859v1

Measurement of the sputtering yield with a 3d stylus surface mapping system: application to copper and α-brass

Jean‐christophe Quantin , E. Darque-Ceretti , R. Combarieu , F. Delamare

Surface and Interface Analysis, 1986, 9 (2), pp.125-128. ⟨10.1002/sia.740090208⟩

Article dans une revue istex hal-03660696v1

Towards sustainable wood fillers from agroforestry for Wood-Plastic Composites (WPC)

Nicolas Le Moigne , Fabien Liagre , Stéphane Corn , Estelle Doineau , Benjamin Gallard et al.

Séminaire IMT « Vers des produits bois à hautes performances environnementales et durables », Sep 2024, Alès, France

Communication dans un congrès hal-04732487v1

Towards sustainable wood fillers from agroforestry for Wood-Plastic Composites (WPC): Key roles of wood species and filler characteristics

Estelle Doineau , Benjamin Gallard , Jean-Christophe Quantin , J. Beigbeder , Alexis Duborper et al.

GDR DUMBIO - Journées de printemps 2023, GDR Durabilité et matériaux Biosourcés, May 2023, Saint-Rémy-lès-Chevreuse, France

Communication dans un congrès hal-04112356v1
Deposit thumbnail

Surface properties assessment of reclaimed carbon fibres for recycling in PA6/CF composites

Louis Jeantet , Arnaud Regazzi , Perrin Didier , Monica Francesca Pucci , Stéphane Corn et al.

ICCM 23 - 23rd International Conference on Composites Materials, Queen's University Belfast, Jul 2023, Belfast (Northern Ireland), United Kingdom

Communication dans un congrès hal-04186058v1

Viscoelastic behaviour of novel thermoplastic elastomer blends for fused filament fabrication (FFF)

Agnès Harlay , Arnaud Regazzi , Jean‐christophe Quantin , Marcos Batistella , Sébastien Blanquer et al.

EPF 2022 - European Polymer Congress, Jun 2022, Prague, Czech Republic

Communication dans un congrès hal-03708408v1
Deposit thumbnail

Lignin as a Major Component of an Intumescent Fire Retardant System for Biopolyester

Valentin Carretier , Monica Francesca Pucci , Clément Lacoste , Arnaud Regazzi , Jean‐christophe Quantin et al.

EPNOE 2021 - The 7th International Polysaccharide Conference, Oct 2021, Nantes, France

Communication dans un congrès hal-03437013v1
Deposit thumbnail

Fused filament fabrication (fff) of electrically conductive pla/pcl/graphene nanoplatelets (gnp) bionanocomposites

N.A. Masarra , Roland El Hage , Marcos Batistella , Jean‐christophe Quantin , Arnaud Regazzi et al.

ADDFABCOMP – 2nd International Conference on Additive Fabrication of Composite, Nov 2021, Online Conference, France

Communication dans un congrès hal-03482552v1

Fused filament fabrication of new fire-retarded biocomposites

José-Marie Lopez-Cuesta , Monica Francesca Pucci , Arnaud Regazzi , Jean‐christophe Quantin , Clément Lacoste

1ere édition FabAddComp Journées scientifiques et techniques – Fabrication Additive des Composites AMAC 2020, Oct 2020, Lorient, France

Communication dans un congrès hal-02970982v1

Biocomposites ignifugés pour la fabrication additive

Valentin Carretier , Monica Francesca Pucci , Arnaud Regazzi , Jean‐christophe Quantin , Clément Lacoste et al.

16èmes journées scientifiques et industrielles du Groupe Français des Polymères (GFP), Mar 2020, Alès, France

Communication dans un congrès hal-02506538v1
Deposit thumbnail

Investigation on the Effects of Recycling and Injection Parameters on Gloss Properties of Smooth Polypropylene Parts

Zaineb Baccouch , Souad Mbarek , Didier Perrin , Olivier Eterradossi , Bernard Monasse et al.

A3M’2018 - Second International Conference on Advanced Materials, Mechanics and Manufacturing, Dec 2018, Hammamet, Tunisia. pp.223-231, ⟨10.1007/978-3-030-24247-3_25⟩

Communication dans un congrès hal-02424764v1
Deposit thumbnail

Impact of injection parameters on Gloss properties of grained polypropylene parts

Souad Mbarek , Zaineb Baccouch , Perrin Didier , Olivier Eterradossi , Bernard Monasse et al.

CMSM'2019 - 8th International Congress on Design and Modeling of Mechanical Systems, Mar 2019, Hammamet, Tunisia. ⟨10.1007/978-3-030-27146-6_79⟩

Communication dans un congrès hal-02462485v1

Effect of recycling and injection parameters on gloss properties of smooth colored polypropylene

Zaineb Baccouch , Souad Mbarek , Perrin Didier , Olivier Eterradossi , Bernard Monasse et al.

EUROMAGH 2018 - 2ème Conférence EuroMaghrébine des BioComposites, Nov 2018, Hammamet, Tunisia

Communication dans un congrès hal-02492511v1

Study of halloysite nanotubes/poly(hydroxybutyrate-co-valerate) (PHBV)/poly(butylene succinate) (PBS) ternary nanocomposites

S. Kennouche , Ch. Remili , M. Kaci , Nicolas Le Moigne , Jean‐christophe Quantin et al.

Eurofillers Polymer Blends 2015, Apr 2015, Montpellier, France

Communication dans un congrès hal-02930465v1

Development of bio‐based cellular materials

Jean Mario Julien , Jean-Charles Bénézet , Eric Lafranche , Jean-Christophe Quantin , Anne Bergeret et al.

XIIIème Congrès de la Société Française de Génie des Procédés, Société Française de Génie des Procédés (SFGP), Nov 2011, Lille, France

Communication dans un congrès hal-01789625v1

Development of nanoclay reinforced poly(lactic acid) cellular materials

V Masson , Marie-France M.-F. Lacrampe , Anne Bergeret , Jean‐christophe Quantin , Jean-Charles Bénézet

BIOFOAMS 2011, Sep 2011, Capri, Italy

Communication dans un congrès hal-03713515v1

Development of Poly(Lactic Acid) cellular materials: modifications induced by X-Ray irradiation and chain extenders

J.M. Julien , Jean-Charles Bénézet , Jean-Christophe Quantin , Eric Lafranche , Anne Bergeret et al.

3rd International Conference on Biofoams (Biofoams 2011), Sep 2011, Capri, Italy

Communication dans un congrès hal-01781889v1

Development of poly(lactid acid) cellular materials: Physical and morphological characterizations

J.M. Julien , Jean-Charles Bénézet , Jean-Christophe Quantin , Eric Lafranche , Anne Bergeret et al.

MoDeSt 2010, 6th International Conference on Modification, Degradation and Stabilization of Polymers, Sep 2010, Athens, Greece

Communication dans un congrès hal-01781882v1
Deposit thumbnail

Approche prévisionnelle dans la détermination du module d'élasticité de composites à matrice tehrmoplastique

L. Avérous , Jean-Christophe Quantin , Dominique Lafon-Pham , A. Crespy

Dixièmes Journées nationales sur les composites, AMAC - Association pour les matériaux composites, Oct 1996, Paris, France

Communication dans un congrès hal-04662170v1

Simulation of Polymer Flow during Fused Filament Fabrication

Arnaud Regazzi , Jean-Christophe Quantin , Anirudha Jain

Colloque IMT - Modélisation, contrôle et optimisation des procédés : de la donnée au jumeau numérique, Mar 2023, Mines Saint-Étienne, France. 2023

Poster de conférence hal-04136183v1
Deposit thumbnail

Polymer processing influence on the double electrical percolation threshold in PLA/PCL/GNP nanocomposites

Nour-Alhoda Masarra , J.-C Quantin , Marcos Batistella , R El Hage , Monica Francesca Pucci et al.

EPF 2022 - European Polymer Congress, Jun 2022, Prague, Czech Republic. , 2022

Poster de conférence hal-03714581v1
Deposit thumbnail

Rheology tests on core build-up materials and clinical implications

M Longerey , Jean‐christophe Quantin , J.-P Salomon , A Bergeret , S Chauvel et al.

IADR 2010, Jul 2010, Barcelone, Spain

Poster de conférence hal-03713510v1
Deposit thumbnail

Development of poly(lactic acid) cellular materials: physical and morphological characterization

J.M. Julien , Jean-Charles Bénézet , Eric Lafranche , Jean-Christophe Quantin , Anne Bergeret et al.

2nd International Conference on Biofoams (Biofoams 2009), Oct 2009, Niagara Falls, Canada

Poster de conférence hal-01781866v1