Access content directly

Jean-François Agassant

119
Documents

Publications

Image document

Foaming parameter identification of polyurethane using FOAMAT ® device

Clément Raimbault , Patrice Laure , Guillaume François , Séverine Boyer , Michel Vincent
Polymer Engineering and Science, 2021, 61 (4), pp.1243-1256. ⟨10.1002/pen.25676⟩
Journal articles hal-03185236v1
Image document

BRDF and gloss computation of polyurethane coatings from roughness measurements: Modelling and experimental validation

Benoît Wittmann , Pierre Montmitonnet , Alain Burr , Christian Gauthier , Jean-François Agassant
Progress in Organic Coatings, 2021, 156, pp.106247. ⟨10.1016/j.porgcoat.2021.106247⟩
Journal articles hal-04030017v1
Image document

Study of scratch resistance of a hard-on-soft polymer bilayer: Combination of in situ vision, X-ray tomography and numerical simulations

Benoît Wittmann , Christian Gauthier , Alain Burr , Jean-François Agassant , Damien Favier
Wear, 2020, 452-453, pp.203271. ⟨10.1016/j.wear.2020.203271⟩
Journal articles hal-02540861v1
Image document

Flow analysis of the polymer spreading during extrusion additive manufacturing

Jean-François Agassant , Franck Pigeonneau , Lucas Sardo , Michel Vincent
Additive Manufacturing, 2019, 29, pp.100794. ⟨10.1016/j.addma.2019.100794⟩
Journal articles hal-02266943v1

Viscoelastic rheology in the melting and crystallization domain: Application to polypropylene copolymers

Margaux Aris-Brosou , Michel Vincent , Jean-François Agassant , Noëlle Billon
Journal of Applied Polymer Science, 2017, 134 (15), pp.44690. ⟨10.1002/app.44690⟩
Journal articles hal-01456912v1

Modelling of the Plastisol Knife Over Roll Coating Process

Yamina Abdesselam , Yves Demay , Romain Castellani , Jean-François Agassant , Richard Perez
International Polymer Processing, 2017, 32 (5), pp.555 - 561. ⟨10.3139/217.3422⟩
Journal articles hal-01649127v1

Opérations de mélange dans les procédés de transformation des polymères - Concepts

Jean-François Agassant , Francis Pinsolle , Bruno Vergnes
Techniques de l'Ingénieur, 2017, AM 3 635, pp.1-13
Journal articles hal-04062914v1

Opérations de mélange dans les procédés de transformation des polymères - Mise en œuvre

Jean-François Agassant , Francis Pinsolle , Bruno Vergnes
Techniques de l'Ingénieur, 2017, AM 3 636, pp.1-23
Journal articles hal-04062922v1

Rheology of Plastisol Formulations for Coating Applications

Yamina Abdesselam , Jean-François Agassant , Romain Castellani , Rudy Valette , Yves Demay
Polymer Engineering and Science, 2017, 57 (9), pp.982-988 ⟨10.1002/pen.24475⟩
Journal articles hal-01395099v1

Numerical Modeling of Bubble Growth in Microcellular Polypropylene Produced in a Core-Back Injection Process Using Chemical Blowing Agents

José Antonio Reglero Ruiz , Michel Vincent , Jean-François Agassant
International Polymer Processing, 2016, 31 (1), pp.26-36. ⟨10.3139/217.3129⟩
Journal articles hal-01315426v1

Experimental Investigation and Modeling of a New High Speed Coating Process

Achraf Kallel , Yves Demay , Jean-François Agassant , Jean-François Chartel , Myriam Grisot
International Polymer Processing, 2016, 31 (3), pp.369-375. ⟨10.3139/217.3214⟩
Journal articles hal-01354081v1

Study of the rheological behavior of plastisol industrial formulations

Yamina Abdesselam , Jean-François Agassant , Romain Castellani , Rudy Valette , Yves Demay
Rhéologie, 2016, 29, pp.26-36
Journal articles hal-01487249v1
Image document

Stability analysis of a polymer film casting problem

Achraf Kallel , Elie Hachem , Francesca Rapetti , Yves Demay , Jean-François Agassant
International Journal for Numerical Methods in Fluids, 2015, 78 (7), pp.436-454. ⟨10.1002/fld.4024⟩
Journal articles hal-01132639v1
Image document

Polymer foaming with chemical blowing agents: Experiment and modeling

José Antonio Reglero Ruiz , Michel Vincent , Jean-François Agassant , Tarik Sadik , Caroline Pillon
Polymer Engineering and Science, 2015, 55 (9), pp.2018-2029. ⟨10.1002/pen.24044⟩
Journal articles hal-01102122v1
Image document

A Personal Perspective on the Use of Modelling Simulation for Polymer Melt Processing

Jean-François Agassant , Malcolm R. Mackley
International Polymer Processing, 2015, 30 (1), pp.121-140. ⟨10.3139/217.3020⟩
Journal articles hal-01133118v1
Image document

Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure

José Antonio Reglero Ruiz , Michel Vincent , Jean-François Agassant , Aurore Claverie , Sébastien Huck
Polymer Engineering and Science, 2015, 55 (11), pp.2465-2473. ⟨10.1002/pen.24136⟩
Journal articles hal-01182895v1
Image document

An Overview of Molten Polymer Drawing Instabilities

Yves Demay , Jean-François Agassant
International Polymer Processing, 2014, 29 (1), pp.128-139. ⟨10.3139/217.2832⟩
Journal articles hal-00961422v1
Image document

Numerical Investigations of Polyester Coextrusion Instabilities

Omar Mahdaoui , Patrice Laure , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 2013, 195, pp.67-76. ⟨10.1016/j.jnnfm.2012.12.014⟩
Journal articles hal-00785075v1
Image document

Experimental validation of a tube based constitutive equation for linear polymer melts with inter-chain tube pressure effect

Rudy Valette , Ghalia Boukellal , Audrey Durin , Jean-François Agassant
Mechanics & Industry, 2013, 14 (1), p. 79-84. ⟨10.1051/meca/2013048⟩
Journal articles hal-00831240v1

Experimental and theoretical study of uniaxial deformation of amorphous poly(ethylene terephthalate) above glass transition temperature

Eric Gorlier , Jean-François Agassant , Jean-Marc Haudin , Noëlle Billon
Plastics, Rubber and Composites, 2013, 11th International Conference on Deformation, Yield and Fracture of Polymers, 30 (2), pp.48 - 55. ⟨10.1179/146580101101541435⟩
Journal articles hal-01654657v1

Experiments and modelling of calender processing for shear thinning thermoplastics between counter rotating rolls with differential velocities

Romain Magnier , Jean-François Agassant , Pierre Bastin
International Polymer Processing, 2013, 28 (4), pp.437-446. ⟨10.3139/217.2794⟩
Journal articles hal-00856681v1
Image document

Influence of the calendering step on the adhesion properties of coextruded structures

Marie-Cécile Serrat , Jean-François Agassant , Jérôme Bikard , Samuel Devisme
International Polymer Processing, 2012, 27 (3), pp.318-327. ⟨10.3139/217.2516⟩
Journal articles hal-00721322v1

Injection Molding of Fibre Reinforced Thermoplastics: Integration of Fibre Orientation and Mechanical Properties Computations

Houssem Miled , Luisa Silva , Thierry Coupez , Jean-François Agassant
International Polymer Processing, 2012, 5, pp.547-556. ⟨10.3139/217.2602⟩
Journal articles hal-00756541v1
Image document

Les Principes de base de la modélisation des procédés de Mise en Forme des Polymères

Jean-François Agassant
Rhéologie, 2012, 22, pp.1-17
Journal articles hal-00836168v1
Image document

Evaluation of a tube-based constitutive equation using conventional and planar elongation flow optical rheometers

Ghalia Boukellal , Audrey Durin , Rudy Valette , Jean-François Agassant
Rheologica Acta, 2011, 50 (5-6), pp.547-557. ⟨10.1007/s00397-011-0573-y⟩
Journal articles hal-00612051v1
Image document

Origin of the Bubble Defect in the Extrusion Coating Process

Cyrille Sollogoub , Pierre Montmitonnet , Yves Demay , Jean-François Agassant , Pascal Deparis
Polymer Engineering and Science, 2011, 51 (2), pp.347-357. ⟨10.1002/pen.21802⟩
Journal articles hal-00524685v1

Investigation of Polymer Stretching Instabilities: Application to Film Blowing

Johann Laffargue , Yves Demay , Jean-François Agassant
International Polymer Processing, 2010, 25 (5), pp.Pages 356-371. ⟨10.3139/217.2347⟩
Journal articles hal-00524592v1

Adhesion in Polypropylene/Aluminum Laminates Made by Extrusion Coating

Samuel Devisme , Jean-Marc Haudin , Jean-François Agassant , Robert Combarieu , Damien Rauline
Journal of Applied Polymer Science, 2009, 112 (5), pp.2609-2624. ⟨10.1002/app.29760⟩
Journal articles hal-00435971v1

Compressible flow in a plate/plate rheometer: Application to the experimental determination of reactive expansion's models parameters for polyurethane foam

Rabea Bouayad , Jérôme Bikard , Jean-François Agassant
International Journal of Material Forming, 2009, 2 (4), pp.243-260. ⟨10.1007/s12289-009-0408-x⟩
Journal articles hal-00861383v1

Rheological Behavior and Mechanical Properties of Sawdust/Polyethylene Composites

F. Godard , Michel Vincent , Jean-François Agassant , Bruno Vergnes
Journal of Applied Polymer Science, 2009, 112 (4), pp.2559-2566. ⟨10.1002/app.29847⟩
Journal articles hal-00509204v1

Wax deposit accumulation in a "cylindrical Couette" geometry

Amine Benallal , Philippe Maurel , Jean-François Agassant
Comptes Rendus Mécanique, 2008, 336 (11-12), pp.Pages 835-839. ⟨10.1016/j.crme.2008.09.007⟩
Journal articles hal-00521864v1

Thermomechanical analysis and modeling of the extrusion coating process

Cyrille Sollogoub , Eric Felder , Yves Demay , Jean-François Agassant , Pascal Deparis
Polymer Engineering and Science, 2008, 48 (8), pp.Pages 1634-1648. ⟨10.1002/pen.21099⟩
Journal articles hal-00673878v1
Image document

Étude du comportement rhéologique et des propriétés mécaniques de composites sciures de bois-polyéthylène haute densité

F. Godard , Michel Vincent , Jean-François Agassant , Bruno Vergnes
Rhéologie, 2008, 13, pp.9-21
Journal articles hal-00509533v1

Numerical simulation of extrusion coating

Samuel Devisme , Jean-Marc Haudin , Jean-François Agassant , Damien Rauline , Fabrice Chopinez
International Polymer Processing, 2007, 22 (1), pp.90-104. ⟨10.3139/217.0038⟩
Journal articles hal-00613051v1

Numerical simulation of extrusion coating

Samuel Devisme , Jean-Marc Haudin , Jean-François Agassant , Damien Rauline , Fabrice Chopinez
International Polymer Processing, 2007, 22 (1), pp.Pages 90-104
Journal articles hal-00673889v1

Numerical simulation of weakly compressible Bingham flows: The restart of pipeline flows of waxy crude oils

Guillaume Vinay , Anthony Vachs , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 2006, 136 (2-3), pp.Pages 93-105. ⟨10.1016/j.jnnfm.2006.03.003⟩
Journal articles hal-00673899v1

Polymer processing extrusion instabilities and methods for their elimination or minimisation

Jean-François Agassant , Dawn R. Arda , Christelle Combeaud , Armin Merten , Helmut Muenstedt
International Polymer Processing, 2006, 21 (3), pp.Pages 239-255
Journal articles hal-00512800v1

Non-isothermal viscoelastic numerical model of the cast-film process

Cyrille Sollogoub , Yves Demay , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 2006, 138 (2-3), pp.Pages 76-86. ⟨10.1016/j.jnnfm.2005.11.011⟩
Journal articles hal-00673894v1

Numerical simulation of non-isothermal viscoplastic waxy crude oil flows

G. Vinay , Anthony Wachs , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 2005, 128 (2-3), p. 144-162. ⟨10.1016/j.jnnfm.2005.04.005⟩
Journal articles hal-00531174v1

Evaluation of stresses in a two-layer co-extruded LDPE melt blown film

E. Gamache , Jean-François Agassant , Yves Demay , P. G. Lafleur
Journal of Plastic Film and Sheeting, 2005, 21 (2), pp.127-144
Journal articles hal-00079219v1
Image document

Evaluation of Stresses in a Two-Layer Co-Extruded LDPE Melt Blown Film

E. Gamache , Jean-François Agassant , Y. Demay , P. G. Lafleur
Journal of Plastic Film and Sheeting, 2005, 21 (2), pp.127-144. ⟨10.1177/8756087905057006⟩
Journal articles hal-00572061v1

Cast film extrusion: An overview of experimental and theoretical approaches

Jean-François Agassant , Yves Demay , Cyrille Sollogoub
International Polymer Processing, 2005, 20 (2), pp.Pages 136-148
Journal articles hal-00673905v1

Advanced finite element 3D injection molding

Luisa Silva , Cyril Gruau , Jean-François Agassant , Thierry Coupez , Jérome Mauffrey
International Polymer Processing, 2005, 20 (3), pp.Pages 265-273
Journal articles hal-00517672v1

Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies

Rudy Valette , Patrice Laure , Yves Demay , Jean-François Agassant
International Polymer Processing, 2004, 2004/02, pp.118-128
Journal articles hal-00015193v1

Convective linear stability analysis of two-layer coextrusion flow for molten polymers

Rudy Valette , Patrice Laure , Yves Demay , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 2004, 121 (1), pp.41-53. ⟨10.1016/j.jnnfm.2004.04.002⟩
Journal articles hal-00015338v1

Cast film problem: A non isothermal investigation

Cyrille Sollogoub , Yves Demay , Jean-François Agassant
International Polymer Processing, 2003, 18 (1), pp.Pages 80-86
Journal articles hal-00613074v1

Investigation of the interfacial instabilities in the coextrusion flow of PE and PS

Rudy Valette , Patrice Laure , Yves Demay , Jean-François Agassant
International Polymer Processing, 2003, 18 (2), pp.Pages 171-178
Journal articles hal-00613066v1

Investigation of bubble instabilities in film blowing process

Johann Laffargue , L. Parent , Pierre G. Lafleur , P.J. Carreau , Yves Demay
International Polymer Processing, 2002, 17 (4), p.347-353
Journal articles hal-00533198v1

Present challenges in the numerical modeling of polymer-forming processes

Bruno Vergnes , Michel Vincent , Yves Demay , Thierry Coupez , Noëlle Billon
Canadian Journal of Chemical Engineering, 2002, 80 (2), pp.Pages 1143-1152
Journal articles hal-00574752v1

The matching of experimental polymer processing flows to viscoelastic numerical simulation

Jean-François Agassant , Frank P T Baaijens , Heike Bastian , Anka Bernnat , A.C.D. Bogaerds
International Polymer Processing, 2002, 17 (1), p.3-10
Journal articles hal-00536042v1
Image document

Analytical models for the inflation of a polymeric tube

Fabrice Schmidt , A. Rodriguez-Villa , Jean-François Agassant , Michel Bellet
European Journal of Mechanics - A/Solids, 2000, 19 (1), pp.89-104. ⟨10.1016/S0997-7538(00)00150-9⟩
Journal articles hal-02051036v1

Anisotropy and mechanical properties of bioriented PVC pipes

Noëlle Billon , Helmut Kappel , S. Crozet , François Bay , Jean-François Agassant
Revue de Metallurgie. Cahiers D'Informations Techniques, 1999, 96 (12), p.1517-1522
Journal articles hal-00538383v1

An unsteady multifluid flow model: Application to sandwich injection molding process

Guy Schlatter , Jean-François Agassant , A. Davidoff , Michel Vincent
Polymer Engineering and Science, 1999, 39 (1), p.78-88
Journal articles hal-00542228v1

Numerical simulation of the film casting process

David Silagy , Yves Demay , Jean-François Agassant
International Journal for Numerical Methods in Fluids, 1999, 30 (1), pp.Pages 1-18. ⟨10.1002/(SICI)1097-0363(19990515)30:1<1::AID-FLD833>3.0.CO;2-Q⟩
Journal articles hal-00613096v1

Stationary and stability analysis of the film casting process

David Silagy , Yves Demay , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 1998, 79 (2-3), pp.Pages 563-583. ⟨10.1016/S0377-0257(98)00119-0⟩
Journal articles hal-00613102v1
Image document

Experimental study and numerical simulation of the injection stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
Polymer Engineering and Science, 1998, 38 (9), p.1399-1412. ⟨10.1002/pen.10310⟩
Journal articles hal-00617038v1

Development of high quality LLDPE and optimised processing for film blowing

Benoît Debbaut , André Goublomme , Olmer Homerin , Rudolf Koopmans , D. Liebman
International Polymer Processing, 1998, 13 (3), Pages 262-270 - Direct link: http://www.polymer-process.com/directlink.asp?IPP980262
Journal articles hal-00618423v1
Image document

Viscoelastic simulation of PET stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
Journal of Non-Newtonian Fluid Mechanics, 1996, 64 (1), pp.19 - 42. ⟨10.1016/0377-0257(95)01420-9⟩
Journal articles hal-01420909v1

FLOW AND FIBER ORIENTATION CALCULATIONS IN REINFORCED THERMOPLASTIC EXTRUDED TUBES

Gilles Ausias , Jean-François Agassant , Michel Vincent
International Polymer Processing, 1994, 9 (1), pp.51-59
Journal articles hal-00403254v1

RHEOLOGY OF SHORT GLASS-FIBER REINFORCED POLYPROPYLENE

Gilles Ausias , Jean-François Agassant , Michel Vincent , Pierre G. Lafleur , Paul-André Lavoie
Journal of Rheology, 1992, 36 (4), pp.525-542. ⟨10.1122/1.550362⟩
Journal articles hal-00403249v1

Computing viscoelastic fluid flow problems at low cost

André Fortin , Abdelmalek Zine , Jean-François Agassant
Journal of Non-Newtonian Fluid Mechanics, 1992, 45 (2), pp.209-229. ⟨10.1016/0377-0257(92)85004-G⟩
Journal articles hal-02074235v1

Identification of foaming parameters for polyurethane with the FOAMAT® device

Clément Raimbault , Patrice Laure , Guillaume François , Séverine A.E. Boyer , Michel Vincent
Annual European Rheology Conference, AERC, Apr 2022, Séville, Spain
Conference papers hal-03862193v1

Foamability of linear and branched polypropylenes by physical extrusion foaming - Input of the thermomechanical analysis of pressure drop in the die

Carlos Sandino , Edith Peuvrel-Disdier , Jean-François Agassant , Séverine A.E. Boyer , Patrice Laure
Annual European Rheology Conference, AERC 2022, Apr 2022, Séville (SP), Spain
Conference papers hal-03858361v1

Extrusion foaming of linear and branched polypropylenes - Input of the thermomechanical analysis of pressure drop in the die

Carlos Sandino , Edith Peuvrel-Disdier , Jean-François Agassant , Séverine A.E. Boyer , Patrice Laure
56ème congrès du GFR, Groupe Français de Rhéologie, Oct 2022, Rennes, France
Conference papers hal-03856613v1

Analysis and Modelling of Extrusion Foaming Behaviour of Polyolefins using Isobutane and CO2

Carlos Sandino , Edith Peuvrel-Disdier , Jean-François Agassant , Séverine A.E. Boyer , Patrice Laure
2nd International Symposium on Plastics Technology, Sep 2022, Aachen (Aix la Chapelle), Germany
Conference papers hal-03858327v1

Foaming parameter identification of polyurethane using FOAMAT® device

Clément Raimbault , Patrice Laure , Guillaume François , Séverine A.E. Boyer , Michel Vincent
55ème Congrès du Groupe Français de Rhéologie, Oct 2021, Bordeaux, France
Conference papers hal-03410713v1

Identification of the polyurethane viscosity during foaming

Jean-François Agassant , Patrice Laure , Michel Vincent , Clément Raimbault , Séverine A.E. Boyer
The PPS-2019 Europe/Africa Regional Conference, Nov 2019, Pretoria, South Africa
Conference papers hal-02399765v1

Scratch resistance of floor covering surfaces

Benoît Wittmann , Christian Gauthier , Alain Burr , Jean-François Agassant , Pierre Montmitonnet
46th Leeds-Lyon Symposium on Tribology, Sep 2019, Lyon, France
Conference papers hal-02334044v1
Image document

Résistance à la rayure de revêtements de sols

Benoît Wittmann , Christian Gauthier , Alain Burr , Jean-François Agassant , Pierre Montmitonnet
Congrès Français de Mécanique 2019, Aug 2019, Brest, France
Conference papers hal-02334030v1

Numerical study of the plastification of an amorphous polymer in a hot end extruder of a 3D printer

Franck Pigeonneau , Michel Vincent , Jean-François Agassant
Fabrication additive : les facteurs clés de succès pour la production série de pièces polymères, Apr 2019, Lyon, France
Conference papers hal-02560204v1

Polyurethane foam injection in a cavity in contact with a porous medium

Clément Raimbault , Séverine A.E. Boyer , Michel Vincent , Patrice Laure , Jean-François Agassant
35th International Conference of the Polymer Processing Society, May 2019, Izmir, Turkey
Conference papers hal-02399573v1
Image document

Principles of polymer processing modelling

Jean-François Agassant , Malcolm. R. Mackley
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France. pp.11002, ⟨10.1051/matecconf/20168011002⟩
Conference papers hal-01446536v1
Image document

Stability analysis of a polymer coating process

Achraf Kallel , Elie Hachem , Yves Demay , Jean-François Agassant
30th International Conference of the Polymer Processing Society, Polymer Processing Society, Jun 2014, Cleveland, Ohio, United States. 5 p
Conference papers hal-01101606v1

Les défis de l'évolution des polymères

Jean-François Agassant
Conférence MIEC, les couleurs de la Plasturgie en Paca, Sep 2011, Sophia Antipolis, France
Conference papers hal-00732392v1

On The Use Of Prototype Industrial Flows To Identify Viscoelastic Constitutive Equations For Polymer Melts

Rudy Valette , Ghalia Boukellal , Audrey Durin , Jean-François Agassant
The 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. pp.677-682 - ISBN 978-0-7354-0911-8, ⟨10.1063/1.3589593⟩
Conference papers hal-00676867v1
Image document

Utilisation de méthodes de champ pour étudier les lois de comportement des polymères fondus

Jean-François Agassant , Ghalia Boukellal , Rudy Valette
20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Conference papers hal-00617832v1
Image document

Injection moulding of fibre reinforced thermoplastics: integration of fibre orientation and mechanical properties computations

Houssem Miled , Luisa Silva , Thierry Coupez , Jean-François Agassant
27th World Congress of the Polymer Processing Society, May 2011, Marrakech, Morocco. 6 p
Conference papers hal-00598733v1
Image document

Polymer rheology at high shear rate for microinjection moulding

Cheima Mnekbi , Michel Vincent , Jean-François Agassant
13th ESAFORM Conference on Material Forming, Apr 2010, Brescia, Italy. pp.Pages 539-542, ⟨10.1007/s12289-010-0826-9⟩
Conference papers hal-00572536v1
Image document

Loi de comportement viscoélastique pour les polymères fondus linéaires polymoléculaires, validation rhéométrique et par mesures de champs d'écoulement

Rudy Valette , Ghalia Boukellal , Audrey Durin , Jean-François Agassant
CFM'09 - XIXème Congrès Français de mécanique, Aug 2009, Marseille, France. 5 p
Conference papers hal-00509375v1
Image document

Détermination des paramètres non linéaires constitutifs de lois de comportement viscoélastique par mesures de champ dans des écoulements complexes

Ghalia Boukellal , Audrey Durin , Jean-François Agassant , Rudy Valette
43ème Colloque du Groupe Français de Rhéologie, Oct 2008, Palaiseau, France. p. 223-226
Conference papers hal-00579364v1
Image document

Calendering of coextruded polymer structures

Marie-Cécile Serrat , Johann Laffargue , Jean-François Agassant , Jérôme Bikard
11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 791-794, ⟨10.1007/s12289-008-0294-7⟩
Conference papers hal-00510352v1
Image document

Injection of thermoset foam: comparison between simulation and experiment

Rabea Bouayad , Jérôme Bikard , Jean-François Agassant
11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.683-686, ⟨10.1007/s12289-008-0307-6⟩
Conference papers hal-00510258v1
Image document

Investigation of LDPE converging flows using fieldwise measurements techniques

Ghalia Boukellal , D. Hertel , Rudy Valette , H. Münstedt , Jean-François Agassant
11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 687-690, ⟨10.1007/s12289-008-0308-5⟩
Conference papers hal-00510260v1
Image document

Numerical simulation of polyester coextrusion: Influence of the thermal parameters and the die geometry on interfacial instabilities

Omar Mahdaoui , Jean-François Agassant , Patrice Laure , Rudy Valette , Luisa Silva
10th ESAFORM Conference Material Forming, Apr 2007, Zaragoza, Spain. pp.Pages 873-878 - ISBN 0735404143, ⟨10.1063/1.2729623⟩
Conference papers hal-00521598v1
Image document

Caractérisation de mousses de polyuréthanes au cours du procédé de fabrication

Jérôme Bikard , Rabea Bouayad , Jean-François Agassant
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Conference papers hal-00521746v1
Image document

Hydrodynamique de l'accumulation des dépôts de paraffine dans une géométrie Couette cylindrique

Amine Benallal , Philippe Maurel , Jean-François Agassant
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Conference papers hal-00521650v1
Image document

Etude numérique de la coextrusion de polyester : Effet de la régulation thermique et de la géométrie de la filière sur la stabilisation des instabilités interfaciales

Omar Mahdaoui , Jean-François Agassant , Patrice Laure , Rudy Valette , Luisa Silva
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Conference papers hal-00521608v1
Image document

Mesures de champ dans des écoulements complexes pour l'identification du comportement d'un polyéthylène basse densité

Ghalia Boukellal , Daniela Hertel , Rudy Valette , H. Münstedt , Jean-François Agassant
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. 6 p
Conference papers hal-00521643v1
Image document

Contribution of Thermal Modelisation to Understand adhesion Mechanisms in Extrusion Coating: Case of Polypropylene on Aluminium

Samuel Devisme , Jean-Marc Haudin , Jean-François Agassant , Damien Rauline , Fabrice Chopinez
22nd Annual Meeting of the Polymer Processing Society (PPS-22), Jul 2006, Yamagata, Japan. 2 p
Conference papers hal-00851359v1
Image document

Technological solutions to reduce the geometrical defects during the cast film process

Cyrille Sollogoub , Yves Demay , Jean-François Agassant
22nd Annual Meeting of the Polymer Processing Society (PPS-22), Jul 2006, Yamagata, Japan. 2 p
Conference papers hal-00851358v1
Image document

Stability of cast-film extrusion of various metallocene polyethylenes

Reda Bouamra , Jean-François Agassant , Christian Peiti , Jean-Marc Haudin
22nd Annual Meeting of the Polymer Processing Society (PPS-22), Jul 2006, Yamagata, Japan. 2 p
Conference papers hal-00851361v1

Le couplage thermo-mécanique dans un procédé industriel de mise en forme de verre autour d'une griffe metallique = Thermo-mechanical coupling during an industrial forming process of a glass/metal junction

Lionel Fourment , Michel van Iseghem , Jean-François Agassant
Aspects thermiques de l'élaboration et de la mise en forme des matériaux, Jan 2000, Châtenay Malabry, France. 5 p
Conference papers hal-00616921v1
Image document

Finite element and automatic remeshing methods for the simulation of complex blow molded polymer components

Michel Bellet , Andrès Rodriguez-Villa , Jean-François Agassant
6th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 98), Jun 1998, Enschede, Netherlands. pp.Pages 489-494
Conference papers hal-00573684v1

Numerical modelling of the film blowing process

Jean-Marc Andre , Yves Demay , Jean-Marc Haudin , Bernard Monasse , Jean-François Agassant
6th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 98), Jun 1998, Enschede, Netherlands. pp.Pages 495-500
Conference papers hal-00573775v1

Identification of viscoelastic rheological parameters by inverse analysis

Oswald Hervé Nouatin , Thierry Coupez , Jean-François Agassant
5th European Rheology Conference, Sep 1998, Portoroz, Slovenia. pp.Pages 112-113 - ISBN: 3798511284
Conference papers hal-00566450v1
Image document

Experimental Study of the injection stretch/blow molding process

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
Proceeding of the ANTEC ‘97, Society of Plastics Engineers, Apr 1997, Toronto, Canada
Conference papers hal-02053552v1
Image document

Analytic Models for the Simultaneous Inflation and Extension of a Polymeric Tube

Fabrice Schmidt , Jean-François Agassant , Michel Bellet
12th International Conference of Polymer Processing Society, May 1996, Sorrentp, Italy
Conference papers hal-02053487v1
Image document

Thermomechanical Simulation of PET Stretch/Blow Molding

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
10th International Conference of Polymer Processing Society, Apr 1994, Akron, United States
Conference papers hal-02053547v1
Image document

Viscoelastic Simulation of P.E.T Stretch/Blow Molding

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
9th International Conference of the Polymer Processing Society, Apr 1993, Manchester, United Kingdom
Conference papers hal-02053322v1

Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Gérard Denis
Colloque National Matériaux: Science et industrie, Jun 1992, Paris, France
Conference papers hal-02057168v1

Etude et modélisation de l’étirage/soufflage de bouteilles en P.E.T

Fabrice Schmidt , Jean-François Agassant , Michel Bellet , Luc Desoutter
Colloque National GFP, Nov 1992, Lyon, France
Conference papers hal-02057172v1

Mise en forme des polymères thermoplastiques

Jean-François Agassant , Jean-Marc Haudin
Marc Carrega et Vincent Verney. Matières plastiques, Propriétés, mise en forme et applications industrielles des matériaux polymères, Dunod/L'Usine Nouvelle, pp.53-110, 2012, 3ème édition, 978-2-10-055997-8
Book sections hal-00732462v1

A kinematic approach to distributive mixing

Jean-François Agassant , Arnaud Poitou , Rudy Valette
Edited by Ica Manas-Zloczower. Mixing and Compounding of Polymers: Theory and Practice. Second edition, Carl Hanser Verlag, pp.Pages 217-239, 2009, 978-3-446-40773-2
Book sections hal-00508510v1

Three-dimensional injection molding simulation

Luisa Silva , Jean-François Agassant , Thierry Coupez
Edited by Musa R. Kamal, Avram I. Isayev and Shi-Jung Liu. Injection molding, technology and fundamentals, Carl Hanser Verlag, Pages 599-651 - Chapter 15, 2009, 978-3-446-41685-7
Book sections hal-00508530v1

Modélisation des écoulements dans les filières d'extrusion

Bruno Vergnes , Jean-François Agassant
Techniques de l'Ingénieur, AM3655, Editions T.I., AM3655 - 19 p., 2008
Book sections hal-03048824v1

Modélisation des écoulements dans les filières d'extrusion

Bruno Vergnes , Jean-François Agassant
Techniques de l'Ingénieur, AM3655, Editions T.I., AM3655 - 19 p., 2008
Book sections hal-00509531v1

Numerical Simulation of Fiber Orientation and Resulting Thermo-Elastic Behavior in Reinforced Thermo-Plastics

Houssem Miled , Luisa Silva , Jean-François Agassant , Thierry Coupez
Pedro P. Camanho, Carlos G. Dávila, Silvestre T. Pinho, Joris J. C. Remmers. Mechanical Response of Composites, Springer, pp.Pages 293-313, 2008, Computational Methods in Applied Sciences : volum 10, 978-1-4020-8583-3. ⟨10.1007/978-1-4020-8584-0_15⟩
Book sections hal-00846522v1

An Overview of Polymer Processing Modelling

Jean-François Agassant , José António Covas
Francisco Chinesta, Elias Cueto. Advances in Material Forming: Esaform 10 Years On, Springer, pp.37-59, 2007, 978-2-287-72142-7 (Print)
978-2-287-72143-4 (Online). ⟨10.1007/978-2-287-72143-4_4⟩
Book sections hal-01005756v1

Plastiques et composites - Avant-propos

Patricia Krawczak , Gilbert Villoutreix , Jean-François Agassant , Christophe Binetruy , Marie-France Lacrampe
Techniques de l'Ingénieur, 1 (AM15), Editions T.I., AM15 - p. 1-3, 2003
Book sections hal-00616915v1

Simulation numérique des procédés de soufflage

Michel Bellet , Bernard Monasse , Jean-François Agassant
Techniques de l'Ingénieur, Référence AM 3 705, Editions T.I., Référence AM 3 705 - 23 p., 2002
Book sections hal-00576338v1

Modélisation de l'injection : Compactage et contraintes résiduelles

Jean-François Agassant , Michel Vincent
Techniques de l'Ingénieur, AM5 (AM3696), Editions T.I., AM3696 - 13 p., 2001
Book sections hal-00616917v1

Etude de la stabilité du procédé de coextrusion

Rudy Valette , Lucia Gavrus , Patrice Laure , Bruno Vergnes , Yves Demay
Oeuvre collectif coordonné par Eric Felder. Surfaces, tribologie et formage des matériaux : Mélanges offerts à François Delamare pour son 60ème anniversaire, Presses MINES ParisTech, pp.461-475, 2001, Sciences de la matière, 2-911762-25-8
Book sections hal-00616931v1

Modélisation de l'injection : Remplissage des moules

Jean-François Agassant , Michel Vincent
Techniques de l'Ingénieur, AM5 (AM3695), Editions T.I., AM3695 - 14 p., 2000
Book sections hal-00616918v1