JEAN-LUC SCHANEN
Présentation
Jean-Luc Schanen obtained his electrical engineering degree in 1990 from Grenoble Institute of Technology, Univ. Grenoble Alpes, France (ENSIEG), and Ph.D degree in 1994 (Univ. Grenoble Alpes). He became Assistant Professor at Univ. Grenoble Alpes in 1995, joining the Electrical Engineering Laboratory of Grenoble (G2ELab). He is Professor at Grenoble-INP Univ. Grenoble Alpes since 2003 and was leading the Power Electronics Research Group of G2ELab between 2015 and 2025. His research activities are focused on Power Electronics Automatic Design Methodology, with a primary focus on ElectroMagnetic Compatibility aspects. From January 2026, he is deputy director of G2ELab. He was deputy director of Engineering School Ense3 (Energy Water, Environment, 1200 students) from 2008 to 2020. During this period, he has set up a new Master Curriculum in Renewable Energies and a Power Electronics Speciality in an International Master, has been the Head of Pedagogic Affairs, has supervised the construction of a new building for Ense3 and G2ELab, and the moving of the school. He is recipient of the French "Palmes Academiques" (chevalier 2017 - Officier 2023) Jean-Luc Schanen has supervised 35+ Ph.D students, among them 7 international co-supervision. He was external member of ~60 PhD Committees (10 international). He is active in the IEEE society (M 99, SM 03, Fellow 23): associate Editor for IEEE transactions on Power Electronics and Industry Applications, and involved in several conferences organisation. He is currently chairing the steering committee of ECCE Europe (IEEE PELS/ECPE), was Technical Program co-Chair of ECCE (USA) in 2018, lead TPC in 2021, General co-Chair in 2023. He was General chair for IEEE-DMC 2024 conference in Grenoble. He has issued ~300 Journal and Conferences papers, including invited talks or keynotes.
Publications
Publications
|
|
Identifying the Key Parameters Contributing to the Conducted Emissions of a Power Electronics ConverterInternational Conference on Integrated Power Electronics Systems (CIPS 2026), Mar 2026, Dresde, Germany |
A large-signal based characterization and modelling method for the output capacitance of GaN-HEMTsInternational Conference on Integrated Power Electronics Systems (CIPS), Mar 2026, Dresden, Germany |
|
|
|
Multi-objective Optimization based Design of 3-L Inverters Considering an Extensive WBG Semiconductors LibraryThe 26th European Conference on Power Electronics and Applications, GDR SEEDS France & EPE Association, Mar 2025, Paris, France. ⟨10.34746/epe2025-0157⟩ |
|
|
Impact of Diode Bridge in Discontinuous Conduction Mode on EMI propagation pathECCE USA 2025, Oct 2025, Philadelphia, United States |
|
|
Comparative Analysis of 3-L Inverters Considering Conducted EMI Emissions PerformancesECCE Europe 2025, Aug 2025, Birmingham, United Kingdom |
Introduction of Ecodesign and circularity in Power Electronics: The vision of Univ. Grenoble AlpsECCE Europe 2024, Sep 2024, Darmstad, Germany |
|
|
|
EMI Frequency Model of a Low Power SMPS in Discontinuous Conduction ModeECCE USA 2024, Oct 2024, Phoenix, United States |
|
|
Fast model of a Hybrid Excitation Synchronous Machine using equivalent reluctance networks for parameter designIEEE Energy Conversion Congress & Expo (ECCE) 2024, Oct 2024, Phoenix, United States |
|
|
Sensorless Magnetic Flux Balancing Strategies for Novel Dual Active Bridge Converter ZVS Modulation PatternsIEEE 21st International Power Electronics and Motion Control Conference (PEMC 2024), Sep 2024, Pilsen, Czech Republic. ⟨10.1109/PEMC61721.2024.10726386⟩ |
EMC: the dark side of Wide Bandgap devicesPEMD 2024, Jun 2024, Notingham, United Kingdom |
|
|
|
A New Time-Based Converter Model Applied to Converter Automated DesignDMC 2024, Nov 2024, Grenoble, France |
|
|
Interest of high frequency decoupling inductors for reducing common mode current in high speed switching cellsCIPS 2024, Mar 2024, DUSSELDORF, Germany |
|
|
New ZVS Modulation Patterns for the Dual Active Bridge ConverterECCE Europe 2024, Sep 2024, Darmstad, Germany |
|
|
Experimental Investigation of Common Mode Current Generation in a Novel Dual Active Bridge Converter ZVS Modulation PatternECCE USA 2024, Oct 2024, Phoenix, United States |
|
|
Design and performance evaluation of air core inductors for Very High Frequency power conversionPCIM Europe 2024 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Jun 2024, Nuremberg, Germany. ⟨10.30420/566262341⟩ |
|
|
Stray Inductance of a Modular Switching Cell Designed for Easier DisassemblyCIPS 2024, Mar 2024, Dusseldorf, Germany. pp.333-340 |
|
|
Dimensionnement d'un filtre hybride de mode communJournées URSI 23023, Mar 2023, Paris Saclay, France |
|
|
Frequency Model for EMI Study of Three-Phase Grid Connected Photovoltaic Inverter on Both DC and AC SidesApplied Power ElectronicS Conference (APEC 2023 ), Mar 2023, ORLANDO, United States |
|
|
Dimensionnement d'un Filtre CEM Actif de Mode CommunColloque international et l'exposition sur la Compatibilité ElectroMagnétique, Jun 2023, Toulouse, France |
|
|
Effect of the auxiliary power supply of active circuits on the performance of active EMI filterPCIM Europe 2023, May 2023, Nuremberg, Germany. ⟨10.30420/566091314⟩ |
Thermal Evaluation of Substrate Technologies Used for Power Peak Management in SSPC ModulesPCIM2023, May 2023, NUREMBERG, Germany |
|
Frequency model for EMC study of mutilevel boost converterECCE2023, Oct 2023, Nashville (Tenessee), United States |
|
EMI, the dark side of WBG devicesIEEE German Chapter, Mar 2022, Onlince Conference, Germany |
|
Packaging design for low EMI generation of power modulesInternational Workshop on Integrated Power Packaging (IWIPP) 2022, Aug 2022, GRENOBLE, France |
|
|
|
Design and experimental validation of a voltage sensing-current cancellation Common Mode linear active filter2022 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), Sep 2022, Hannovre, Germany |
|
|
Three phase PV inverter LCOE optimization considering technological choiceEPE 2022 : 24th European Conference on Power Electronics and Applications, Sep 2022, Hannovre, Germany |
TAPIR (compacT and modulAr Power modules with IntegRated cooling) Technology: Goals and Challenges3D-PEIM, Jun 2021, Osaka, Japan. pp.1-6, ⟨10.1109/3D-PEIM49630.2021.9497263⟩ |
|
Estimation of CM Parasitic Capacitances in Front-end LLC Resonant DC-DC Converters2021 12th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), 2021, Tabriz, Iran. pp.352--356, ⟨10.1109/PEDSTC52094.2021.9405841⟩ |
|
|
|
MECEP LOT 5 IMPACT SUR LES EMISSIONS RF CONDUITES DES TECHNOLOGIES EMERGENTES POUR LES ELECTRONIQUES DE PUISSANCECEM 2020, Apr 2021, Lyon, France |
|
|
Etude par optimisation de l'impact de la montée en tension sur la topologie des onduleurs aéronautiquesSymposium de Génie Electrique – SGE 2020, Jul 2021, Nantes, France |
|
|
Identification and Validation of a Non Symmetrical System Level EMC Model for Power Electronics Converter2021 IEEE Energy Conversion Congress and Exposition (ECCE2021), Apr 2021, Vancouver (virtual), Canada. ⟨10.1109/ECCE47101.2021.9595780⟩ |
Interpolation-Based Switching and Conduction Losses Model of GaN TransistorsIECON 2020, Oct 2020, Singapore, Singapore |
|
3D PCB package for GaN inverter leg with low EMC feature2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe), Sep 2020, Lyon, France. pp.1-10, ⟨10.23919/EPE20ECCEEurope43536.2020.9215641⟩ |
|
Experimental Validation of the Performances of an Inverter Sized with Optimization MethodsEPE 2020, Sep 2020, Lyon, France |
|
Advanced Packaging Concepts for Wide Bandgap Power ElectronicsPSMA Power Technology Roadmap Forum Power Sources Manufacturers Association, Jun 2020, Online Webinar, France |
|
Using Deterministic Optimization to Compare Interleaved and Coupled Inverters: Results and Experimental VerificationECCE 2020, Oct 2020, Detroit, Michigan, United States |
|
An Analytical model of the Dc-Link Current Ripple in multiphase PWM inverterPCIM Europe digital days 2020; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 2020, Unknown, Germany. pp.1--5 |
|
Design by Optimization of multiphase inverter for electric vehicle drive2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe), 2020, Lyon, France. pp.1--8 |
|
Full 3D advanced packaging concepts for Wide Bandgap Power ElectronicsAPEC 2020 – Industry session, Mar 2020, New Orleans, Louisiana, United States |
|
Bidirectional Wireless Power Transfer System with Wireless Control for Electrical VehicleApec 2019, Mar 2019, Annaheim, United States |
|
Overcurrent Detection using an Integrated Rogowski Coil for an Electric Vehicles Inverter4th IEEE International Future Energy Electronics Conference 2019 – IFEEC 2019, Nov 2019, Singapour, Singapore |
|
Validation of Inductor Analytical Loss Models under Saturation Conditions for PWM inverter20th International Scientific Conference on Electric Power Engineering (EPE) 2019, Sep 2019, Gênes, Italy |
|
Analytical Calculation of DC-Link Current for N-Interleaved 3-Phase PWM Inverters Considering AC Current Ripple20th International Scientific Conference on Electric Power Engineering (EPE) 2019, Sep 2019, Gênes, Italy |
|
Teaching how to characterize and implement high speed power devices for tomorrow's engineersECCE 2019, Sep 2019, Baltimore, United States |
|
Impact of the number of phases on losses of a multiphase inverter for electric vehicle drive10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC), 2019, Shiraz, Iran |
|
Impact of Converters Interactions on Control Design in a Power Electronics Dense Network: Application to More Electric AircraftEPE19 - ECCE EUROPE, Sep 2019, Gênes, Italy |
|
EMC Generation and Propagation in Embedded Grids with Multiple Converters2019 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC), Apr 2019, Shiraz, Iran |
|
Optimal Design of an AC Filtering Inductor for a 3-Phase PWM Inverter Including Saturation Effect10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC), Feb 2019, Shiraz, Iran |
|
Dimensionnement optimal d’onduleurs de forte puissance dans le contexte aéronautiqueJCGE 2019, Jun 2019, Ile d'Oléron, France |
|
Predesign method in Power electronics: application to a wide input and output voltage range Interleaved Buck ConverterIEEE PEDSTC 2019, Feb 2019, Shiraz, Iran |
|
Determining the minimal decoupling capacitor in a high speed switching cell using optimizationecce 2018, Sep 2018, Portland, United States |
|
Bus Bar Embedded Rogowski CoilAPEC 2018, Mar 2018, San Antonio, United States |
|
Isolated single stage bidirectional AC-DC converter with power decoupling and reactive power control to interface battery with the single phase gridAPEC 2018, Mar 2018, San Antonio, United States |
|
Thermal Model of Litz Wire Toroidal Inductor Based on Experimental MeasurementsAPEC 2018, Mar 2018, San Antonio, United States |
|
Diamond Schottky barrier diodes for power electronics applicationsECCE 2018, Sep 2018, Portland, United States |
|
Optimal design of a magnetically coupled filter for high efficiency, low cost and low volume dc-dc battery storage converterIPEC 2018, May 2018, Niigata, Japan |
|
First Order Design by Optimization Method: Application to an Interleaved Buck Converter and ValidationAPEC 2018, Mar 2018, San Antonio, United States |
|
|
|
Imaginary machine design: proposal of concepts, principles and a methodology as a new paradigm for preliminary design by optimization of engineering systemOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Tyrol, Austria. ⟨10.1109/ecce.2017.8096629⟩ |
IMPACT DES LONGUEURS DE CABLE SUR LES EMISSIONS CEM CONDUITES D’UN CONVERTISSEUR DC/DCColloque international et exposition sur ma compatibilité électromagnétique CEM, Jul 2018, Paris, France |
|
Identifying the Stray Elements of the Experimental Setup Used in the Semiconductor DatasheetsCIPS 2018, Mar 2018, Stuttgart, Germany |
|
|
|
From a Continuous and Imaginary Design to a Real Device: a Heuristic Strategy Dedicated to Power ElectronicsOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Innsbruck, Austria |
|
|
Modeling Strategy for Designing in the Continuous Imaginary World with Power Electronics Discrete ComponentsOIPE 2018 : 15th International Workshop on Optimization and Inverse Problems in Electromagnetism 2018, Sep 2018, Innsbruck, Austria |
Analytical Model of EMI Sources on the Network Level Including Power Electronic ConvertersEPE 2017 – ECCE Europe, Sep 2017, Varsovie, Poland |
|
DESIGN BY OPTIMIZATION OF A THREE PHASES AFE UNDER EMC CONSTRAINTSELECTRIMACS 2017, Jul 2017, Toulouse, France |
|
Design by Optimization Methodology: Application to a Wide Input and Output Voltage Ranges Interleaved Buck ConverterECCE 2017 , Oct 2017, Cincinatti, United States |
|
Semiconductor Loss Reduction in a Modular Multilevel Converter by Harmonic Injection to the Reference Voltage2017 8th Power Electronics, Drive Systems & Technologies Conference (pedstc), 2017, Teheran, Iran. pp.305--310 |
|
|
|
Analytical model for SiC based power converter optimization including EMC and thermal constraints2017 International Symposium on Electromagnetic Compatibility (EMC EUROPE), Sep 2017, Angers, France. ⟨10.1109/EMCEurope.2017.8094757⟩ |
Impact of Model Accuracy in Design by Optimization ProcessPEDSTC, Feb 2017, Mashhad, Iran. ⟨10.1109/PEDSTC.2017.7910396⟩ |
|
Design of Power Electronics Converter: beyond topologyPEDSTC 2017, Feb 2017, Mashhad, Iran |
|
La Compatibilité Electromagnétique, Soucis de Fiabilité des Systèmes et Enjeux de ConceptionJournée d’Etudes sur la Compatibilité Electromagnétique, Feb 2017, Alger, Algérie |
|
SELECTIVITY IN FREQUENCY MODELLING OF ELECTRICAL CIRCUIT FOR THE SIZING BY OPTIMIZATION OF EMC FILTER FOR POWER ELECTRONICSELECTRIMACS 2017, Jul 2017, Toulouse, France |
|
|
|
GreEn-ER Living Lab - A Green Building with Energy Aware OccupantsProceedings of the 5th International Conference on Smart Cities and Green ICT Systems, Apr 2016, Rome, Italy. ISBN 978-989-758-184-7, p. 316-323 |
Taking Into Account Interactions between Converters in the Design of Aircraft Power NetworksEnergy Conversion Congress & Exposition (ECCE 2016), Sep 2016, Milwaukee, United States |
|
Design by Optimization of a Wide Input and Output Voltage Ranges DC/DC Converter for Aircraft ApplicationMEA 2017 (More Electrical Aircraft), 2016, Bordeaux, France |
|
Analytical Model of DC-DC Converters Based on Switching Impedances and EMI SourcesEMC Europe 2016, Sep 2016, Wroclaw, Poland |
|
|
|
Modèle analytique d'estimation des pertes dans une cellule de commutation MOSFET-diode Schottky SiC en vue de la conception et de l'optimisation d'un dissipateur thermiqueSymposium de Génie Electrique (SGE'16), Jun 2016, Grenoble, France |
Analytical Losses Model for SiC semiconductors dedicated to optimization operationsPCIM Europe 2016, May 2016, Nuremberg, Germany. pp.CD |
|
Design by Optimization of Power ElectronicsConverter Including EMC ConstraintsEMC Europe, Sep 2016, Wroclaw, Poland. ⟨10.1109/EMCEurope.2016.7739226⟩ |
|
Using Design by Optimization for Reducing the Weight of a SiC Switching CellECCE, Sep 2016, Milwaukee, WI, United States. ⟨10.1109/ECCE.2016.7855545⟩ |
|
|
|
Optimisation Globale d'une Cellule de Commutation SiC : Dimensionnement CEM et ThermiqueSymposium de Génie Electrique (SGE'16), Jun 2016, Grenoble, France |
DESIGN BY OPTIMIZATION OF CONTROLLED CONVERTERS WITH EMC FILTERS FOR AEROSPACEOptimization and Inverse Problems in Electromagnetism (OIPE 2016), Sep 2016, Rome, Italy |
|
Implementation and Performance of a Current Sensor for a Laminated Bus BarEnergy Conversion Congress & Exposition (ECCE 2016), Sep 2016, Milwaukee, United States |
|
|
|
Optimisation des filtres CEM amont et aval pour un redresseur PFC triphaséSymposium de Genie Electrique, Jun 2016, Grenoble, France |
Sizing of Power Electronics EMC Filters using Design by Optimization MethodologyPEDSTC 2016, Feb 2016, Téhéran, Iran |
|
The Accurate Input Impedances of a DC-DC Converters Connected to the Network2015 IEEE 15TH INTERNATIONAL CONFERENCE ON ENVIRONMENT AND ELECTRICAL ENGINEERING (IEEE EEEIC 2015), 2015, Rome, Italy. pp.331--336 |
|
A New Analytical EMC Model of Power Electronics Converters based on Quadripole System: Application to Demonstrate the Mode Decoupling ConditionAPEC 2015, Mar 2015, Charlotte, United States |
|
Input Impedance of Modern Embedded Networks Including Many Power Electronics Converters: An Analytical Investigation2015 IEEE 15TH INTERNATIONAL CONFERENCE ON ENVIRONMENT AND ELECTRICAL ENGINEERING (IEEE EEEIC 2015), 2015, Rome, Italy. pp.337--342 |
|
Integrated Design by Optimization of Electrical Power Systems for More Electric AircraftMEA 2015, Feb 2015, Toulouse, France |
|
Copper losses evaluation in multi-strands conductors Formal solution based on the magnetic potentialECCE 2015, Sep 2015, Montréal, Canada |
|
Electromagnetic noise identification in DC network of industrial grid connected Photovoltaic SystemIEEE-CPE 2015, 2015, Lisboa, Portugal |
|
Avion plus électrique, plus composite: impact de la CEM sur la masse des systèmes électriquesClub EEA 2015, Mar 2015, Toulouse, France |
|
Increasing windings efficiency at high frequencies: hollow conductors and clad metal conductors Formal solution based on the magnetic potentialECCE 2015, Sep 2015, Montréal, Canada |
|
|
|
Towards More Optimization for Aircraft Energy Conversion SystemsMore Electric Aircraft (MEA 2015), Feb 2015, Toulouse, France. pp.0 |
|
|
Towards More Optimization for Aircraft Energy Conversion SystemsSAE, Aerospace Systems and Technology Conference (ASTC), Sep 2014, Cincinnati, United States |
SELECTIVITY AND IMPROVEMENT OF THE MODELLING OF POWER ELECTRONICQ FREQUENCY MODELS FOR OPTIMISATIONOIPE2014, Optimization and inverse problems in electromagnetism, Sep 2014, Delft, Netherlands |
|
Input impedance investigation of a DC-DC converter on a large frequency range: a novel analytical approachEPE 2013 - ECCE Europe, Sep 2013, Lille, France |
|
New μPEEC formulation for modeling 2D core,transformer. Principles, academic and industrial applicationsAPEC 2013, Mar 2013, Long Beach, United States |
|
EMC Models for Power Electronics : from Converter Design to System LevelECCE 2013, Sep 2013, Denver, United States |
|
EMC models of Power Electronics converters for network analysisEPE 2013 - ECCE Europe, Sep 2013, Lille, France |
|
Harmonics propagation in industrial networks in the range of 2 to 150kHzAPEC 2013, Mar 2013, Long Beach, United States |
|
Conducted EMC Prediction for a Power Converter with SiC ComponentsAPEMC, May 2012, Singapore, Singapore. pp.206, ⟨10.1109/APEMC.2012.6237867⟩ |
|
|
|
Impact of SiC Components on the EMC Behaviour of a Power Electronics ConverterECCE, Sep 2012, Raleigh, United States. pp.4411, ⟨10.1109/ECCE.2012.6342222⟩ |
EMI Study of a 70kW Interleaved Three-Phase Inverter for Aircraft ApplicationECCE 2012, Sep 2012, Raleigh, United States |
|
Study of High Frequency Harmonics Propagation in Industrial NetworksEMC Europe 2012, Sep 2012, Rome, Italy |
|
Optimized layout for an EMC filter: Analysis and ValidationsEMC Europe 2012, Sep 2012, Rome, Italy |
|
Modélisation HF des variateurs de vitesse pour Aéronefs : Dimensionnement et Optimisation de filtres CEMEPF 2012, Jul 2012, Bordeaux, France |
|
Optimization of EMI Filters for electrical drives in AircraftOIPE 2012, Sep 2012, Ghent, Belgium |
|
Optimisation of EMI Filters for Electrical Drives in AicraftOIPE 2012, 12th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2012, Ghent, Belgium |
|
|
|
System Simulation for EMC Network AnalysisAPEC, Mar 2011, Fort Worth, TX, United States. ⟨10.1109/APEC.2011.5744636⟩ |
Influence and benefits of stray magnetic couplings in EMC filteringEPE 2011 - ECCE Europe, Aug 2011, Birmingham, United Kingdom |
|
Optimal stray magnetic couplings for EMC filtersECCE 2011, Sep 2011, Phoenix, United States |
|
Search for quasi-optimal current return paths in a composite environmentEMC Europe 2011, Sep 2011, York, United Kingdom |
|
A simple model for interaction between equipment at a frequency of some tens of kHz,CIRED 2011, Jun 2011, Francfort, Germany |
|
A new compact, isolated and integrated gate driver using high frequency transformer for interleaved Boost converterECCE 2011, Sep 2011, Phoenix, United States |
|
EMC Modelling of Drives for Aircraft Applications: Modelling Process and Optimisation of EMI FiltersEPE 2011 - ECCE Europe, Aug 2011, Birmingham, United Kingdom |
|
Méthode de modélisation du câblage pour la CEM des circuits de puissance: méthode PEEC7eme edition de la Conference sur le Genie electrique (CGE'07), Apr 2011, Alger, Algérie |
|
A simple model for interaction between equipment at a frequency of some tens of kHz.CIRED 2011, 21st International Conference on Electricity Distribution, Jun 2011, Francfort, Germany |
|
EMC Modeling of Drives for Aircraft Applications: Modeling Process, EMI Filter Optimization and Technological choiceECCE 2011, Sep 2011, Phoenix, United States |
|
Méthode de modélisation du câblage pour la CEM des circuits de puissance : méthode PEEC7ème édition de la Conférence sur le Génie Electrique, 2011, Alger, Algérie |
|
Reversing the power flow in the looped electrical distribution network by using a cascaded H-bridge D-SSSCIEEE PEDSTC 2011, Feb 2011, Téhéran, Iran |
|
Design and Optimization techniques for the current return path in a composite aircraftEPE 2011 - ECCE Europe, Aug 2011, Birmingham, United Kingdom |
|
CEM: du semiconducteur au réseau embarqué.7eme edition de la Conference sur le Genie electrique (CGE'07), Apr 2011, Alger, Algérie |
|
Active reduction of common mode current in power moduleCIPS 2010 (Conference on integrated Power Electronics Systems), Mar 2010, Nuremberg, Germany |
|
|
|
CAPTEURS DE COMPOSANTES MULTIPOLAIRES POUR UNE CARACTERISATION EN CHAMP PROCHE : PREMIERS RESULATS EXPERIMENTAUXCEM, Apr 2010, Limoges, France |
Towards the conception and optimisation of the current return path in a composite aircraftIEEE International Systems Conference 2010, Apr 2010, San Diego, United States |
|
|
|
PEEC-Models for EMC filter layout optimizationCIPS 2010, Mar 2010, Nuremberg, Germany |
Analyse CEM d'un réseau multiconvertisseur2EMC, Nov 2010, Rouen, France |
|
|
|
Modèle PEEC pour l'optimisation de filtre C.E.M par routage astucieux des pistesEPF 2010, Jun 2010, Saint-Nazaire, France |
A Novel Fuzzy Logic DC Bus Voltage Balancing Controller for a D-SSSC Cascaded H-bridge ConverterPEDSTC 2010, Feb 2010, Téhéran, Iran. pp.141-146 |
|
|
|
MODELLING PROCESS AND OPTIMISATION OF EMC FILTERS FOR POWER ELECTRONICS APPLICATIONSXI-th International Workshop on Optimization and Inverse Problems in Electromagnetism, Sep 2010, Sofia, Bulgaria. pp.ISBN 978-954-438-855-3 |
|
|
Automatic Layout Optimization of an EMC filterIEEE Energy Conversion Conference and Expo, Sep 2010, Atlanta, United States |
The benefits of looping a radial distribution system with a power flow controllerPECON 2010, Nov 2010, Kuala Lampur, Malaysia |
|
|
|
Automatic Layout Optimization of a Double Sided Power Module Regarding Thermal and EMC constraintsEnergy Conversion Congress and Expo, Sep 2009, San José, United States. pp.CDROM |
|
|
Black Box" EMC model for Power Electronics ConverterEnergy Conversion Congress and Expo, Sep 2009, San José, CA, United States. pp.CDROM |
|
|
Compact EMC model of power electronics converter for conducted EMC studies in embedded networksAutomotive Power Electronics 2009, 2009, Paris, France |
Loop Antennas for Near Field Multipolar Expansion Identification: First Experimental Validations4th International Conference on Electromagnetic Near-Field Characterization and Imaging (ICONIC 2009), Jun 2009, Taipei, Taiwan. pp.134-138 |
|
|
|
Reduction of conducted EMC using busbar stray elementsApplied Power Electronics Conference 2009, Feb 2009, Washingon, United States |
|
|
Tools dedicated to the Electromagnetic Modelling of Power StructuresAutomotive Power Electronics 2009, 2009, Paris, France |
|
|
Identification of equivalent multipolar electromagnetic sources by space filteringCompumag 2009, Nov 2009, Florianópolis, Brazil. pp.512 |
|
|
Physical Layout of High Current Rectifiers: Modern Methods for an Old ChallengeIndustry Applications Society Annuel Meeting IAS 2008, Oct 2008, Edmonton, Canada |
|
|
A Power Electronic based Transformer for Feeding Sensitive LoadsPower Electronics Specialists Conference PESC 08, Jun 2008, Rhodes, Greece |
|
|
New robust coil sensors for near field characterizationMOMAG, Sep 2008, Florianópolis, Brazil |
Avion composite: nouvel environnement électromagnétique dans la distribution électriqueCEM08 14ème colloque international et exposition sur la compatibilité électromagnétique - JS08 journée scientifique URSI-France, May 2008, Paris, France |
|
InCa3D a CAD tool for stray elements computation in Electrical EngineeringMagsoft User Club, Feb 2008, Austin, United States |
|
|
|
PWM Inverter output filter: cost-losses trade off and optimal designAPEC'08, Feb 2008, Austin, United States |
Coils Sensors Design for Near Field Multipolar Expansion IdentificationThirteenth Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2008), May 2008, Athènes, Greece. pp.Page 449, PE3-17 |
|
A Modular AC/DC Rectifier Based on Cascaded H-bridgeEPE PEMC'08, Sep 2008, Poznan, Poland |
|
|
|
Identification de sources multipolaires équivalentes par filtrage spatialNumélec 2008, Dec 2008, Liège, Belgique. pp. 90-91 |
|
|
Flyback converter surface minimization: design procedure and formulasPower Electronics Specialists Conference PESC 08, Jun 2008, Rhodes, Greece |
|
|
Short-circuit limitation thanks to a series connected VSCAPEC'08, Feb 2008, Austin, United States |
Capteurs de composantes multipolaires pour une caractérisation en champ procheCEM08 14ème colloque international et exposition sur la compatibilité électromagnétique - JS08 journée scientifique URSI-France, May 2008, Paris, France |
|
Multipolar Expansion Sensors For Near Field CharacterizationEMC Europe 2008, Sep 2008, Hambourg, Germany |
|
Improving conducted EMI forecasting with accurate layout modelingIEEE Symposium on Embedded EMC, 2EMC, ESIGELEC, Oct 2007, Rouen, France |
|
InCa3D a CAD tool for stray elements computation in Electrical EngineeringECPE Seminar: «Virtual Prototyping in Power Electronics, Nov 2007, Baden-Dättwil, Switzerland |
|
Design of Cascaded H-Bridge Rectifier for Medium Voltage ApplicationsIEEE PESC 07, Jun 2007, Orlando, United States |
|
Electromagnetic considerations for designing double-sided power modulesIEEE Industrial Application Society 2007, Sep 2007, New Orléans, United States |
|
Power Multichip Module design regarding EMCIEEE EMC Compo 2007, Nov 2007, Turin, Italy |
|
Experimental Study of a Pulsating Heat Pipe with Combined Circular and Square Section Channels42nd annual Industry Applications Society Meeting and Conference, Sep 2007, New-Orléans, United States |
|
Design of Power Electronic Transformer based on Cascaded H-bridge Multilevel ConverterIEEE ISIE'07, International Symposium on Industrial Electronics, Jun 2007, Vigo, Spain |
|
Multi-level Converter Dimensioning with Structure and Losses Consideration for DFACTS ApplicationsEPE'2007, Sep 2007, Aalborg, Denmark |
|
Sizing of an electrical machine in an operating cycleOptimization and Inverse Problem in Electromagnetism, Sep 2006, Sorrento, Italy. 2 p |
|
User of accurate chip level modeling and analysis of a power module to establish reliability rules2006 IEEE International Symposium on Industrial Electronics, Jul 2006, Montréal, Canada. 6p |
|
Stability analysis for aircraft on-board system3rd IET International Conference on Power Electronics, Machines and Drives (PEMD 2006), Apr 2006, Dublin, France. pp.361-367, ⟨10.1049/cp:20060132⟩ |
|
Introduction: EMC Where are we ?ECPE Seminar: EMC in Power Electronics, Jul 2006, Grenoble, France |
|
Analyse par la simulation des modèles d'interconnexion nécessaires à la conception de convertisseurs à découpage monolithiquesEPF 2006 : Électronique de Puissance du Futur, Jul 2006, Grenoble, France |
|
|
|
EMI estimation for DC/AC hard switching converter using Wiener filter12th IEEE International Conference on Power Electronics and Motion Control (PEMC 2006), 2006, Portoroz, Slovenia. pp.473-478 |
Busbar design: how to spare nanohenries ?ECPE Seminar: EMC in Power Electronics, Jul 2006, Grenoble, France |
|
Optimisation of gate circuit layout for reduced EMC self-disturbance inside Power ModulesECPE Seminar: EMC in Power Electronics, Jul 2006, Grenoble, France |
|
Busbar Design: How to Spare Nanohenries ?Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, Oct 2006, Tampa, France. ⟨10.1109/IAS.2006.256790⟩ |
|
Busbar design: how to spare nanohenriesIAS-IEEE Conference, Oct 2006, Tampa, Floride, United States |
|
Importance of interconnect in integrated power systems4th CIPS, Jun 2006, Naples, Italy |
|
Modelling and sizing of an electrical drive with a voltage inverter and induction machine11th European Conference on Power Electronics and Applications, Sep 2005, Dresde, Germany |
|
A unified modeling method for stray inductance determination of any complex 3D geometryEPE 2005, Sep 2005, Dresde, Germany |
|
Bilan Workshop EPEJournées GDR, Oct 2005, Lyon, France |
|
Gate circuit layout optimization of power module regarding transient current imbalanceIEEE-PESC'05, Jun 2005, Recife, Brazil. pp.PESC'05 |
|
A Trench IGBT distributed model with thermo-sensible parametersEPE 2005, Sep 2005, Dresde, Germany |
|
Stability Approach for Vehicle DC Power Networks: Application to Aircraft On-Board SystemIEEE-PESC'05, Jun 2005, Recife, Brazil. pp.PESC'05 |
|
Optimization of a DC Capacitor TankIEEE IAS 2005, Oct 2005, Hong Kong, Hong Kong SAR China |
|
|
|
Better understanding EMI generation of power converters36th IEEE International Power Electronics Specialists Conference (PESC 2005)., 2005, Recife, Brazil |
Vers une meilleure prise en compte du câblage dans la conception et l'optimisation des Systèmes Intégrés de l'Electronique de PuissanceJournées GdR, Oct 2005, Lyon, France |
|
Design of a PWM Inverter regarding conducted EMC and Losses: Influence of some key parametersIEEE IAS 2005, Oct 2005, Hong Kong, Hong Kong SAR China |
|
Planar busbar optimization regarding current sharing and stray inductance minimizationEPE 2005, Sep 2005, Dresde, Germany |
|
Modélisation avancée de module de puissanceJournées GdR, Oct 2005, Lyon, France |
|
EMI study of a three phase inverter-fed motor drivesConference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., Oct 2004, Seattle, United States. ⟨10.1109/IAS.2004.1348850⟩ |
|
Inside a power moduleIndustry Applications Conference, 2004. 39th, Oct 2004, Seattle, United States |
|
Comparative study of new emerged packages for high-power IGBT modulesPower Conversion Intelligent Motion Conference, PCIM 2004, May 2004, Nuremberg, Germany |
|
EMI modeling of an inverter-motor association3rd international conference and workshop on compatibility in power electronics (CPE), May 2003, Gdansk, Poland |
|
Semiconductors and power layout: new challenges for the optimization of high power converterPower Electronics Specialist Conference, 2003. PESC '03., Jun 2003, France |
|
Power integration: electrical analysis of new emerging packageEuropean Conference on Power Electronics and Applications 10th, Sep 2003, Toulouse, France |
|
Fast EMI prediction method for three-phase inverter based on Laplace transformsPESC 2003 - Power Electronics Specialist Conference, Jun 2003, Acapulco, Mexico. ⟨10.1109/PESC.2003.1216608⟩ |
|
Current evaluation inside a power fuseIASTED, PES'02, Power and Energy System, 2002, Marina del Rey, United States |
|
Estimation method of disturbances generated by a voltage diode rectifier in discontinuous mode in association with a LISNPESC 2002 - Power Electronics Specialists Conference, Jun 2002, Cairns, Australia. ⟨10.1109/PSEC.2002.1023069⟩ |
|
Hybrid Si-SiC fast switching cell modeling and characterization including parasitic environment description by PEEC methodPower Electronics Specialists Conference, PESC' 02. 2002 IEEE 33rd Annual,, 2002, United States. pp.Volume 4, 23-27 Page(s):1753 - 1757, (2002) |
|
Modélisation de l'ensemble de la connectique d'un onduleur triphasé de 200 kVAElectronique de puissance du futur, 2002, Nov 2002, Montpellier, France |
Interconnection modellingPower electronics semiconductors devices, Wiley, 2009 |
|
Switching cell definitionPower electronics semiconductors devices, Wiley, 2009 |
|
Serial or paralleled connected power transistorsPower electronics semiconductors devices, Wiley, 2009 |
|
Cellule de commutationComposants électroniques de puissance et leur mise en oeuvre, Hermès, pp.149 à 177, 2005 |
|
Modélisation de la connectiqueComposants électroniques de puissance et leur mise en oeuvre, Hermès, pp.65 à 148, 2005 |
|
Association série ou parallèle des MOS et IGBTInterrupteurs électroniques de puissance, Hermès-Lavoisier, pp.153-200, 2003 |
|
|
Intégration de la Compatibilité ElectroMagnetique dans la conception de convertisseurs en Electronique de Puissance.Energie électrique. Institut National Polytechnique Grenoble (INPG), 1994. Français. ⟨NNT : ⟩ |
|
|
Modèles pour l'analyse, modèles de conceptionEnergie électrique. Institut National Polytechnique de Grenoble - INPG, 2000 |