Jérémy Bleyer Chercheur au laboratoire Navier, Ecole des Ponts ParisTechProfesseur chargé de cours de l'Ecole Polytechnique et Maître de conférences de l'Ecole des Ponts ParisTech

Identifiants chercheurs

IdHAL :

jeremy-bleyer

ORCID :

0000-0001-8212-9921

Présentation

My research activities aim at developing advanced mechanical models as well as innovative simulation tools in order to study the failure of materials and structures. I try to cover a wide spectrum of disciplines, ranging from applied mathematics (convex analysis and optimization in particular), theoretical mechanics (homogenization, generalized media, variational principles) and computational mechanics (finite element method, nonlinear solvers). If some of my works may be quite fundamental, I also try to implement them in different engineering applications, most of them in civil engineering. In this respect, the methodologies I propose are usually chosen while having in mind two important societal concerns: sustainable construction and risk management.

Publications

Article dans une revue (60)

A bridging-domain approach for multiscale modeling of anisotropic fracture in large-scale heterogeneous structures Zakaria Chafia,Julien Yvonnet,Jeremy Bleyer Computer Methods in Applied Mechanics and Engineering, 2026, 452, pp.118774. ⟨10.1016/j.cma.2026.118774⟩ Article dans une revue hal-05495183v1
Bridging Overlapping 2D Coarse and Fine Meshes Within the Phase Field Fracture Method Zakaria Chafia,Julien Yvonnet,Jeremy Bleyer International Journal for Numerical Methods in Engineering, 2025, 126 (9), ⟨10.1002/nme.70043⟩ Article dans une revue hal-05059883v1
Expressing general constitutive models in FEniCSx using external operators and algorithmic automatic differentiation Andrey Latyshev,Jérémy Bleyer,Corrado Maurini,Jack S Hale Journal of Theoretical, Computational and Applied Mechanics, 2025, pp.1-28. ⟨10.46298/jtcam.14449⟩ Article dans une revue hal-04735022v3
Multi-physics modelling of 3D-printed concrete evolution in environmental conditions Alice Gribonval,Maxime Pierre,Nicolas Ducoulombier,Karam Sab,Romain Mesnilet al. Cement and Concrete Research, 2025, 196, pp.107918. ⟨10.1016/j.cemconres.2025.107918⟩ Article dans une revue hal-05068590v1
Multi-material topology optimization of structural load-bearing capacity using limit analysis Leyla Mourad,Jeremy Bleyer,Romain Mesnil,Joanna Nseir,Karam Sabet al. Journal of Theoretical, Computational and Applied Mechanics, 2025, pp.1-24. ⟨10.46298/jtcam.12427⟩ Article dans une revue hal-03528107v4
Stochastic generalized standard materials and risk-averse effective behavior Jeremy Bleyer Journal of the Mechanics and Physics of Solids, 2025, 195, pp.105952. ⟨10.1016/j.jmps.2024.105952⟩ Article dans une revue hal-04076581v3
A Data-Driven-based homogenization method to simulate the anisotropic damage of brittle heterogeneous structures Zakaria Chafia,Julien Yvonnet,Jérémy Bleyer Computer Methods in Applied Mechanics and Engineering, 2025, 437, pp.117747. ⟨10.1016/j.cma.2025.117747⟩ Article dans une revue hal-04908843v1
Stone masonry floor systems for low environmental impact structures Pierre Navaro Auburtin,Myriam Saadé,Manuel Manthey,Mathilde Louërat,Jérémy Bleyeret al. Journal of Building Engineering, 2025, 113, pp.114017. ⟨10.1016/j.jobe.2025.114017⟩ Article dans une revue hal-05407950v1
Learning Elastoplasticity with Implicit Layers Jeremy Bleyer Computer Methods in Applied Mechanics and Engineering, 2025, 444, pp.118145. ⟨10.1016/j.cma.2025.118145⟩ Article dans une revue hal-05029738v1
Regularization of softening plasticity with the cumulative plastic strain-rate gradient G. Bacquaert,Jeremy Bleyer,C. Maurini Journal of the Mechanics and Physics of Solids, 2025, 194, pp.105923. ⟨10.1016/j.jmps.2024.105923⟩ Article dans une revue hal-04767390v1
Massively parallel phase field fracture simulations on supercomputers: towards multi-billion degree-of-freedom computations Zakaria Chafia,Julien Yvonnet,Jérémy Bleyer,Stéphane Vincent,Simon El Ouafa Advanced Modeling and Simulation in Engineering Sciences, 2024, 11 (1), pp.25. ⟨10.1186/s40323-024-00280-4⟩ Article dans une revue hal-04907614v1
Accelerating the Adaptive Eyre–Milton FFT-based method for infinitely double contrasted media Martin Dolbeau,Jérémy Bleyer,Karam Sab Comptes Rendus. Mécanique, 2024, 352 (G1), pp.251-267. ⟨10.5802/crmeca.269⟩ Article dans une revue hal-04802224v1
An FFT-based adaptive polarization method for infinitely contrasted media with guaranteed convergence Karam Sab,Jérémy Bleyer,Sébastien Brisard,Martin Dolbeau Computer Methods in Applied Mechanics and Engineering, 2024, 427, pp.117012. ⟨10.1016/j.cma.2024.117012⟩ Article dans une revue hal-04554775v1
Intergranular stress and plastic strain formation during laser scanning of an additively manufactured stainless steel: an experimentally-driven thermomechanical simulation study Nikhil Mohanan,Juan Guillermo Santos Macías,Jérémy Bleyer,Thomas Helfer,Manas Upadhyay Materialia, 2024, 34, pp.102082. ⟨10.1016/j.mtla.2024.102082⟩ Article dans une revue hal-04556379v1
Risk-averse estimates of effective properties in heterogeneous elasticity Jeremy Bleyer Comptes Rendus. Mécanique, 2023, 351 (G1), pp.29-42. ⟨10.5802/crmeca.171⟩ Article dans une revue hal-03964172v1
Elastoplastic and limit analysis of reinforced concrete with an equilibrium-based finite element formulation Mohammed-Khalil Ferradi,Agnès Fliscounakis,Mathieu Arquier,Jeremy Bleyer Computers & Structures, 2023, 286, pp.107095. ⟨10.1016/j.compstruc.2023.107095⟩ Article dans une revue hal-04157914v1
Evaluating the failure load of high-rise reinforced concrete walls under fire loading using the yield design approach Mingguan Yang,Duc Toan Pham,Jérémy Bleyer,Patrick de Buhan Structures, 2023, 48, pp.934-946. ⟨10.1016/j.istruc.2022.12.070⟩ Article dans une revue hal-03937857v1
Applications of conic programming in non-smooth mechanics Jeremy Bleyer Journal of Optimization Theory and Applications, 2022, ⟨10.1007/s10957-022-02105-z⟩ Article dans une revue hal-03553836v1
Structural robustness quantification through the characterization of disproportionate collapse compared to the initial local failure Mohammad El Hajj Diab,Cédric Desprez,André Orcesi,Jeremy Bleyer Engineering Structures, 2022, 255, pp.113869. ⟨10.1016/j.engstruct.2022.113869⟩ Article dans une revue hal-03673485v1
Continuum damage analysis of delamination in composite laminates using a stress-based layerwise plate model Paul Bouteiller,Jeremy Bleyer,Karam Sab International Journal of Solids and Structures, 2022, pp.111611. ⟨10.1016/j.ijsolstr.2022.111611⟩ Article dans une revue hal-03639729v1
An assessment of anisotropic phase-field models of brittle fracture Jean-Michel Scherer,Stella Brach,Jeremy Bleyer Computer Methods in Applied Mechanics and Engineering, 2022, 395, pp.115036. ⟨10.1016/j.cma.2022.115036⟩ Article dans une revue hal-03668563v1
Consistent derivation of stress-based generalized models in elastodynamics: application to layerwise plate models Paul Bouteiller,Jeremy Bleyer,Karam Sab International Journal of Solids and Structures, 2022, ⟨10.1016/j.ijsolstr.2021.111077⟩ Article dans une revue hal-03348209v1
Développement d'outils de calculs innovants dans l'ingénierie de génie civil Jeremy Bleyer,Mathieu Arquier,Agnès Fliscounakis Transitions. Les nouvelles Annales des Ponts et Chaussées, 2022, Bâtiments et construction en transition, 2, pp.68-73 Article dans une revue hal-03976385v1
A viscous active shell theory of the cell cortex Hudson Borja da Rocha,Jeremy Bleyer,Hervé Turlier Journal of the Mechanics and Physics of Solids, 2022, 164, pp.104876. ⟨10.1016/j.jmps.2022.104876⟩ Article dans une revue hal-03403141v1
A Hybridized Mixed Approach for Efficient Stress Prediction in a Layerwise Plate Model Lucille Salha,Jeremy Bleyer,Karam Sab,Joanna Bodgi Mathematics , 2022, 10 (10), pp.1711. ⟨10.3390/math10101711⟩ Article dans une revue hal-03676500v1
A novel upper bound finite-element for the limit analysis of plates and shells Jeremy Bleyer European Journal of Mechanics - A/Solids, 2021, 90, pp.104378. ⟨10.1016/j.euromechsol.2021.104378⟩ Article dans une revue hal-03306248v1
Automated formulation and resolution of limit analysis problems Jeremy Bleyer,Ghazi Hassen Computers & Structures, 2021, 243, pp.106341. ⟨10.1016/j.compstruc.2020.106341⟩ Article dans une revue hal-02570860v2
Topology optimization of load-bearing capacity Leyla Mourad,Jeremy Bleyer,Romain Mesnil,Joanna Nseir,Karam Sabet al. Structural and Multidisciplinary Optimization, 2021, 64 (3), pp.1367-1383. ⟨10.1007/s00158-021-02923-1⟩ Article dans une revue hal-03270638v1
Dual finite-element analysis using second-order cone programming for structures including contact Chadi El Boustani,Jérémy Bleyer,Mathieu Arquier,Mohammed-Khalil Ferradi,Karam Sab Engineering Structures, 2020, 208, 20 p. ⟨10.1016/j.engstruct.2019.109892⟩ Article dans une revue hal-02428540v1
Numerical upper bounds to the ultimate load bearing capacity of three‐dimensional reinforced concrete structures Hugues Vincent,Mathieu Arquier,Jeremy Bleyer,Patrick de Buhan International Journal for Numerical and Analytical Methods in Geomechanics, 2020, 44 (16), pp.2216-2240. ⟨10.1002/nag.3144⟩ Article dans une revue hal-02977801v1
Elastoplastic and limit analysis of 3D steel assemblies using second-order cone programming and dual finite-elements Chadi El Boustani,Jeremy Bleyer,Mathieu Arquier,Mohammed-Khalil Ferradi,Karam Sab Engineering Structures, 2020, 221, pp.111041. ⟨10.1016/j.engstruct.2020.111041⟩ Article dans une revue hal-02884021v1
Automating the formulation and resolution of convex variational problems: applications from image processing to computational mechanics Jeremy Bleyer ACM Transactions on Mathematical Software, 2020, 46 (3), pp.27. ⟨10.1145/3393881⟩ Article dans une revue hal-02388646v2
Extending interior-point methods to non-linear second-order cone programming: application to finite-strain elastoplasticity Chadi El Boustani,Jeremy Bleyer,Mathieu Arquier,Karam Sab International Journal for Numerical Methods in Engineering, 2020, 122 (1), pp.270-293. ⟨10.1002/nme.6537⟩ Article dans une revue hal-02930390v1
Mesh-adapted stress analysis of multilayered plates using a layerwise model Lucille Salha,Jeremy Bleyer,Karam Sab,Joanna Bodgi Advanced Modeling and Simulation in Engineering Sciences, 2020, 7 (1), ⟨10.1186/s40323-020-0142-y⟩ Article dans une revue hal-02612588v1
The MFrontGenericInterfaceSupport project Thomas Helfer,Jérémy Bleyer,Tero Frondelius,Ivan Yashchuk,Thomas Nagelet al. Journal of Open Source Software, 2020, 5 (48), pp.2003. ⟨10.21105/joss.02003⟩ Article dans une revue hal-02552891v1
A unified solid/fluid finite element formulation and its possibility for modelling submarine landslides and their consequences Xue Zhang,Eugenio Oñate,Sergio Andres Galindo Torres,Jeremy Bleyer,Kristian Krabbenhoft Computer Methods in Applied Mechanics and Engineering, 2019, ⟨10.1016/j.cma.2018.07.043⟩ Article dans une revue hal-01872683v1
Yield design-based numerical analysis of three-dimensional reinforced concrete structures Hugues Vincent,Mathieu Arquier,Jeremy Bleyer,Patrick de Buhan International Journal for Numerical and Analytical Methods in Geomechanics, 2018, 42 (18), pp.2177-2192. ⟨10.1002/nag.2850⟩ Article dans une revue hal-01855342v1
Phase-field modeling of anisotropic brittle fracture including several damage mechanisms Jeremy Bleyer,Roberto Alessi Computer Methods in Applied Mechanics and Engineering, 2018, 336, pp.213--236. ⟨10.1016/j.cma.2018.03.012⟩ Article dans une revue hal-01736465v1
Influence of heterogeneities on crack propagation Okan Yilmaz,Jeremy Bleyer,Jean-François Molinari International Journal of Fracture, 2018, 209 (1-2), pp.77-90. ⟨10.1007/s10704-017-0239-6⟩ Article dans une revue hal-01571293v1
Stability analysis of rough surfaces in adhesive normal contact Valentine Rey,Jeremy Bleyer Computational Mechanics, 2018, ⟨10.1007/s00466-018-1556-y⟩ Article dans une revue hal-01731280v1
Multiphase continuum models for fiber-reinforced materials Jeremy Bleyer Journal of the Mechanics and Physics of Solids, 2018, ⟨10.1016/j.jmps.2018.07.018⟩ Article dans une revue hal-01849299v1
Advances in the simulation of viscoplastic fluid flows using interior-point methods Jeremy Bleyer Computer Methods in Applied Mechanics and Engineering, 2018, 330, pp.368-394. ⟨10.1016/j.cma.2017.11.006⟩ Article dans une revue hal-01672045v1
Hybrid discretization methods with adaptive yield surface detection for Bingham pipe flows Karol L Cascavita,Jeremy Bleyer,Xavier Chateau,Alexandre Ern Journal of Scientific Computing, 2018, 77 (3), pp.1424-1443. ⟨10.1007/s10915-018-0745-3⟩ Article dans une revue hal-01698983v3
Lagrangian modelling of large deformation induced by progressive failure of sensitive clays with elastoviscoplasticity Xue Zhang,Daichao Sheng,Scott W Sloan,Jeremy Bleyer International Journal for Numerical Methods in Engineering, 2017, 112 (8), pp.963-989. ⟨10.1002/nme.5539⟩ Article dans une revue hal-01485340v1
Microbranching instability in phase-field modelling of dynamic brittle fracture Jeremy Bleyer,Jean-François Molinari Applied Physics Letters, 2017, 110 (15), pp.151903. ⟨10.1063/1.4980064⟩ Article dans une revue hal-01508202v1
Dynamic crack propagation with a variational phase-field model: limiting speed, crack branching and velocity-toughening mechanisms Jeremy Bleyer,Clément Roux-Langlois,Jean-François Molinari International Journal of Fracture, 2017, 204 (1), pp.79--100. ⟨10.1007/s10704-016-0163-1⟩ Article dans une revue hal-01390233v1
Dip-coating of yield stress fluids Mathilde Maillard,Jeremy Bleyer,A.L. Andrieux,Jalila Boujlel,Philippe Coussot Physics of Fluids, 2016, 28, pp.53102 - 53102. ⟨10.1063/1.4947473⟩ Article dans une revue hal-01495131v1
A numerical approach to the yield strength of shell structures Jeremy Bleyer,Patrick de Buhan European Journal of Mechanics - A/Solids, 2016, 59, pp.178-194. ⟨10.1016/j.euromechsol.2016.03.002⟩ Article dans une revue hal-01303348v1
Efficient numerical computations of yield stress fluid flows using second-order cone programming Jeremy Bleyer,Mathilde Maillard,Patrick de Buhan,Philippe Coussot Computer Methods in Applied Mechanics and Engineering, 2015, 283, pp.599 - 614. ⟨10.1016/j.cma.2014.10.008⟩ Article dans une revue hal-01081508v1
Locking-free discontinuous finite elements for the upper bound yield design of thick plates Jérémy Bleyer,Canh Van Le,Patrick de Buhan International Journal for Numerical Methods in Engineering, 2015, 103 (12), pp.894-913. ⟨10.1002/nme.4912⟩ Article dans une revue hal-01184188v1
A $\Gamma$-Convergence Result for the Upper Bound Limit Analysis of Plates Jérémy Bleyer,Guillaume Carlier,Vincent Duval,Jean-Marie Mirebeau,Gabriel Peyré ESAIM: Mathematical Modelling and Numerical Analysis, 2015, ⟨10.1051/m2an/2015040⟩ Article dans une revue hal-01069919v2
Failure design of high-rise concrete panels under fire loading Jeremy Bleyer,Duc Toan Pham,Patrick de Buhan Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics, 2015, Themed issue on direct methods - part two, 168 (4), pp.178-185. ⟨10.1680/eacm.14.00028⟩ Article dans une revue hal-01283598v1
Lower bound static approach for the yield design of thick plates Jérémy Bleyer,Patrick de Buhan International Journal for Numerical Methods in Engineering, 2014, 100 (11), pp.814-833. ⟨10.1002/nme.4776⟩ Article dans une revue hal-01082202v1
Breakage of non-Newtonian character in flow through a porous medium: Evidence from numerical simulation. Jérémy Bleyer,Philippe Coussot Physical Review E : Statistical, Nonlinear, and Soft Matter Physics [2001-2015], 2014, 89 (6), pp.063018. ⟨10.1103/PhysRevE.89.063018⟩ Article dans une revue hal-01055574v1
A computational homogenization approach for the yield design of periodic thin plates. Part II : Upper bound yield design calculation of the homogenized structure Jérémy Bleyer,Patrick de Buhan International Journal of Solids and Structures, 2014, 51 (13), pp.2460-2469. ⟨10.1016/j.ijsolstr.2014.03.019⟩ Article dans une revue hal-00987438v1
A computational homogenization approach for the yield design of periodic thin plates. Part I: Construction of the macroscopic strength criterion Jérémy Bleyer,Patrick de Buhan International Journal of Solids and Structures, 2014, 51 (13), pp.2448-2459. ⟨10.1016/j.ijsolstr.2014.03.018⟩ Article dans une revue hal-00987435v1
Upper bound limit analysis of plates using a rotation-free isogeometric approach Hung Nguyen-Xuan,Hoang Thai Chien,Jérémy Bleyer,Phu Vinh Nguyen Asia Pacific Journal on Computational Engineering, 2014, 1 (1), pp.12. ⟨10.1186/s40540-014-0012-5⟩ Article dans une revue hal-01073384v1
A greedy algorithm for yield surface approximation Jérémy Bleyer,Patrick de Buhan Comptes Rendus. Mécanique, 2013, 341 (8), pp.605-615. ⟨10.1016/j.crme.2013.06.003⟩ Article dans une revue hal-00850868v1
On the performance of non-conforming finite elements for the upper bound limit analysis of plates Jérémy Bleyer,Patrick de Buhan International Journal for Numerical Methods in Engineering, 2013, 94 (3), pp.308-330. ⟨10.1002/nme.4460⟩ Article dans une revue istex hal-00776908v1
Yield surface approximation for lower and upper bound yield design of 3d composite frame structures Jérémy Bleyer,Patrick de Buhan Computers & Structures, 2013, 129, pp. 86-98. ⟨10.1016/j.compstruc.2013.08.011⟩ Article dans une revue hal-00870789v1

Communication dans un congrès (39)

Implicit automatic differentiation and implicit layers for constitutive modeling Jeremy Bleyer 12th European Solid Mechanics Conference (ESMC), Jul 2025, Lyon, France Communication dans un congrès hal-05268008v1
Une méthode multi-échelle basée sur les données pour la simulation de l'endommagement anisotrope des structures hétérogènes Zakaria Chafia,Julien Yvonnet,Jérémy Bleyer 26e Congrès Français de Mécanique, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239), Aug 2025, Metz, France Communication dans un congrès hal-05313156v1
Multi-physics Modelling of the Influence of Environmental Conditions on the Hardened Properties of 3D-printed Concrete Alice Gribonval,Maxime Pierre,Nicolas Ducoulombier,Karam Sab,Romain Mesnilet al. Sim-AM 2025, CIMNE, Sep 2025, Pavie, Italy Communication dans un congrès hal-05269178v1
Application de l'équation de Lippmann-Schwinger à la propagation des ondes acoustiques de Bloch Martin Dolbeau,Karam Sab,Pierre Margerit,Jérémy Bleyer CFA 2025 - 17e Congrès Français d'Acoustique, Société Française d'Acoustique (SFA), Apr 2025, Paris, France Communication dans un congrès hal-05365854v1
Differentiable Constitutive Modeling with FEniCSx and JAX Jeremy Bleyer,Andrey Latyshev,Corrado Maurini,Jack S. Hale FEniCS 2025, Jun 2025, Groningen, Netherlands Communication dans un congrès hal-05268010v1
Differentiable constitutive modeling in a machine learning-compatible framework Jeremy Bleyer DTE & AICOMAS 2025: 3rd IACM Digital Twins in Engineering Conference (DTE 2025) & 1st ECCOMAS Artificial Intelligence and Computational Methods in Applied Science (AICOMAS 2025), Feb 2025, Paris, France Communication dans un congrès hal-05267920v1
Learning elastoplasticity with implicit layers Jeremy Bleyer ECCOMAS CMCS IV: Computational Modeling of Complex Materials Across the Scales, May 2025, Champs-sur-Marne, France Communication dans un congrès hal-05267992v1
Régularisation de l'adoucissement par gradient de plasticité dans le potentiel de dissipation Goustan Bacquaert,Jérémy Bleyer,Corrado Maurini 16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France Communication dans un congrès hal-04611029v1
Une approche multi-échelle basée sur les données pour la prédiction de l'endommagement anisotrope des structures Zakaria Chafia,Julien Yvonnet,Jérémy Bleyer 16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France Communication dans un congrès hal-04611058v1
Formulation stochastique des matériaux standards généralisés Jérémy Bleyer 16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France Communication dans un congrès hal-04610941v1
A framework for expressing general constitutive models in FEniCSx Andrey Latyshev,Jérémy Bleyer,Jack Hale,Corrado Maurini 16e Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France Communication dans un congrès hal-04610881v1
Stress-Based Method for Concrete Solids’ Reinforcement Design Camille Colas,Alessandro Perlongo,Trung Nguyen Nguyen,Jeremy Bleyer TINCE 2023 – Technological Innovations in Nuclear Civil Engineering, Oct 2023, Gif-sur-Yvette, France Communication dans un congrès hal-04239714v1
Robust optimization applied to uncertain limit analysis and optimal plastic design Jérémy Bleyer,Vincent Leclère 25ème Congrès Français de Mécanique, Association Française de Mécanique - AFM, Aug 2022, Nantes, France. 10 p Communication dans un congrès hal-04280187v1
Formulation thermodynamique et cadre variationnel pour des modèles d'élastoplasticité à état critique Goustan Bacquaert,Jeremy Bleyer,C. Maurini,S. Raude 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France Communication dans un congrès hal-03717621v1
TOPOLOGY OPTIMIZATION OF LOAD BEARING CAPACITY FOR STRUCTURES WITH DIFFERENT TENSILE/COMPRESSIVE STRENGTHS Leyla Mourad,Jeremy Bleyer,Romain Mesnil,Joanna Nseir,Wassim Raphaelet al. 14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris (virtual), France Communication dans un congrès hal-03148136v1
mgis.fenics Part II: Cosserat media in small deformation with mgis.fenics Tamara Dancheva,Unai Alonso,Michael D Barton,Jeremy Bleyer,Thomas Helferet al. FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495241⟩ Communication dans un congrès hal-03196906v1
MULTIPHASE CONTINUA FOR FIBER-REINFORCED MATERIALS Jeremy Bleyer 14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France Communication dans un congrès hal-03148134v1
mgis.fenics: Coupling MFront and FEniCS for complex solid mechanics simulations Thomas Helfer,Jeremy Bleyer,Raffaele Russo,Tamara Dancheva FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495232⟩ Communication dans un congrès hal-03196914v1
DAMAGE ANALYSIS OF MULTILAYERED PLATES USING THE SCLS1 LAYERWISE MODEL Paul Bouteiller,Jeremy Bleyer,Jean-François Caron,Karam Sab 14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France Communication dans un congrès hal-03148137v1
MFRONT: AN OPEN-SOURCE CODE GENERATOR FOR COMPLEX CONSTITUTIVE LAWS Thomas Helfer,Gentien Marois,Jeremy Bleyer 14th World Congress on Computational Mechanics (WCCM), Jan 2021, Paris, France Communication dans un congrès hal-03148143v1
Automating the formulation and resolution of convex variational problems with the fenics_optim package Jeremy Bleyer FEniCS 2021, Mar 2021, Cambridge, United Kingdom. ⟨10.6084/m9.figshare.14495655.v1⟩ Communication dans un congrès hal-03196894v1
Analyse duale des structures en contact par une méthode de point intérieur Boustani Chadi El,Jérémy Bleyer,Karam Sab,Mohammed Khalil Ferradi,Mathieu Arquier 14ème Colloque National en Calcul de Structures (CSMA 2019), CSMA, LEM3, MSME, Université de Lorraine, Arts et Métiers, CNRS, May 2019, Hyères, France Communication dans un congrès hal-04824656v1
Modelling non-linear constitutive material laws in FEniCS with MFront Jeremy Bleyer Club-U MFront 2019, Oct 2019, Saclay, France Communication dans un congrès hal-02320418v1
Ultimate Limit State Design of three-dimensional reinforced concrete structures: a numerical approach Hugues Vincent,Mathieu Arquier,Jeremy Bleyer,Patrick de Buhan Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2018), Feb 2018, Bad Hofgastein, Austria Communication dans un congrès hal-01738631v1
Phase-field Modeling of Anisotropic Brittle Fracture in Fiber-reinforced Composites Jeremy Bleyer,Roberto Alessi 13th World Congress on Computational Mechanics (WCCM XIII), Jul 2018, New York, United States Communication dans un congrès hal-02434339v1
A Discontinuous Skeletal Method for Bingham Fluids Karol L Cascavita,Jeremy Bleyer,Xavier Chateau,Alexandre Ern 13th World Congress on Computational Mechanics (WCCM XIII), Jul 2018, New York, United States Communication dans un congrès hal-02434344v1
Yield design based numerical analysis of three-dimensional reinforced concrete structures Hugues Vincent,Mathieu Arquier,Jeremy Bleyer,Patrick de Buhan 4th international conference on Mechanical Models in Structural Engineering, Dec 2017, Madrid, Spain Communication dans un congrès hal-01738638v1
Rupture dynamique de matériaux fragiles en milieu hétérogène par un modèle à gradient d'endommagement Jeremy Bleyer,Jean-François Molinari 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01899358v1
Multiphase continuum models for fiber-reinforced media Jeremy Bleyer CMCS 2017 - Computational Modeling of Complex Materials across the Scales, Nov 2017, Paris, France Communication dans un congrès hal-02434342v1
Méthodes numériques pour le calcul à la rupture des structures de génie civil Jeremy Bleyer CFM 2017 23ème Congrès Français de Mécanique, Aug 2017, Lille, France Communication dans un congrès hal-01625645v1
Contact de surfaces rugueuses et instabilités en présence d'adhésion Valentine Rey,Jeremy Bleyer,Jean-François Molinari 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01899328v1
Microbranching instability using a variational phase-field model Jeremy Bleyer,Jean-François Molinari CFRAC 2017 Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, 2017, Nantes, France Communication dans un congrès hal-01625627v1
Variational phase field model for brittle fracture : insights on dynamic crack branching and propagation in heterogeneous media Jeremy Bleyer,Clément Roux-Langlois,Jean-François Molinari EMMC15 – 15th European Mechanics of Materials Conference, Sep 2016, Bruxelles, Belgium Communication dans un congrès hal-02434341v1
Éléments finis pour le calcul à la rupture des structures de coque Jeremy Bleyer,P de Buhan CSMA 2015, 12e Colloque National en Calcul des Structures, May 2015, Giens, France Communication dans un congrès hal-01165976v1
Yield design computations on homogenized periodic plates Jérémy Bleyer,Patrick de Buhan 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Jul 2014, Barcelone, Spain. pp. 1908-1919 Communication dans un congrès hal-01058724v1
Yield design of axisymmetric multilayered shells Jérémy Bleyer,Patrick de Buhan 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Jul 2014, Barcelone, Spain Communication dans un congrès hal-01058726v1
Breakage&quot; of non-Newtonian character in flows through porous medium: Evidence from NMR data and numerical simulations Thibaud Chevalier,Stéphane Rodts,Jeremy Bleyer,Xavier Chateau,Philippe Coussot 86th annual meeting of the Society of Rheology, Society of Rheology, Oct 2014, Philadelphia, United States Communication dans un congrès hal-01079090v1
An optimization method for approximating the macroscopic strength criterion of stone column reinforced soils Maxime Gueguin,Ghazi Hassen,Jérémy Bleyer,Patrick de Buhan ComGeoIII, Aug 2013, Poland. pp.484-494 Communication dans un congrès hal-00860900v1
A majoration method to obtain true upper bounds for the limit analysis of von Mises plates Jérémy Bleyer,Patrick de Buhan International Conference on Computational Mechanics, Mar 2013, Durham, United Kingdom. pp.16-CM13 Communication dans un congrès hal-00807542v1

Poster de conférence (2)

Combining FEniCS and MFront Code Generation Tools for Nonlinear Mechanics Jeremy Bleyer,Thomas Helfer SIAM Conference on Computational Science and Engineering (CSE21), Mar 2021, Fort Worth, Texas, United States Poster de conférence hal-03168914v1
Analyse des structures par optimisation convexe : application aux charpentes métalliques Chadi El Boustani,Jeremy Bleyer,Karam Sab,Mathieu Arquier,Mohammed Khalil Ferradi 14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France Poster de conférence hal-02164718v1

Ouvrages (2)

MEALOR II Damage Mechanics and Local Approach to Fracture Jacques Besson,Jérémy Bleyer,Sylvia Feld-Payet,Anne-Françoise Gourgues-Lorenzon,Florent Hannardet al. CERN - European Organization for Nuclear Research, 441 p., 2023, ⟨10.5281/zenodo.10125170⟩ Ouvrages hal-04288497v1
Elastic, Plastic and Yield Design of Reinforced Structures Patrick de Buhan,Jérémy Bleyer,Ghazi Hassen ISTE Press - Elsevier, 1st Edition, pp.342, 2017, 9781785482052 Ouvrages hal-01571290v1

Chapitre d'ouvrage (5)

Robust Optimization Applied to Uncertain Limit Analysis Jeremy Bleyer,Vincent Leclère Direct Methods for Limit State of Materials and Structures, 101, Springer Nature Switzerland, pp.225-242, 2023, Lecture Notes in Applied and Computational Mechanics, ⟨10.1007/978-3-031-29122-7_11⟩ Chapitre d'ouvrage hal-04338471v1
Limit Analysis of Complex 3D Steel Structures Using Second-Order Cone Programming Chadi El Boustani,Jérémy Bleyer,Karam Sab Direct Methods - Methodological Progress and Engineering Applications, pp.45-62, 2021, ⟨10.1007/978-3-030-48834-5_3⟩ Chapitre d'ouvrage hal-02906864v1
Numerical Yield Design Analysis of High-Rise Reinforced Concrete Walls in Fire Conditions Jeremy Bleyer,Duc Toan Pham,Patrick de Buhan Advances in Direct Methods for Materials and Structures, Springer, Cham, pp.143-161, 2017, 978-3-319-59810-9. ⟨10.1007/978-3-319-59810-9_9⟩ Chapitre d'ouvrage hal-01583109v1
Limit Analysis of Plates Jeremy Bleyer Encyclopedia of Continuum Mechanics, Springer, 2017, 978-3-662-53605-6. ⟨10.1007/978-3-662-53605-6_135-1⟩ Chapitre d'ouvrage hal-01690391v1
Yield Design of Periodically Heterogeneous Plates Jérémy Bleyer,Duc Toan Pham,Patrick de Buhan,Céline Florence Springer International Publishing. Direct Methods for Limit and Shakedown Analysis of Structures, 220, Springer International Publishing, pp.143-158, 2015, Advanced Computational Algorithms and Material Modelling Series: Solid Mechanics and Its Applications, 978-3-319-12928-0. ⟨10.1007/978-3-319-12928-0_8⟩ Chapitre d'ouvrage hal-01115853v1

Autre publication scientifique (3)

Open Review of &quot;Expressing general constitutive models in FEniCSx using external operators and algorithmic automatic differentiation Andrey Latyshev,Jérémy Bleyer,Corrado Maurini,Jack S Hale,Thomas Helferet al. 2025 Autre publication scientifique hal-05082559v1
Review of “Multi-material topology optimization of structural load-bearing capacity using limit analysis Leyla Mourad,Jeremy Bleyer,Romain Mesnil,Joanna Nseir,Karam Sabet al. 2024 Autre publication scientifique hal-04693259v1
Méthodes numériques pour le calcul à la rupture des structures de génie civil Jeremy Bleyer 2015 Autre publication scientifique hal-01306140v1

Pré-publication, Document de travail (1)

Robust limit analysis theory for computing worst-case limit loads under uncertainties Jeremy Bleyer,Vincent Leclère 2022 Pré-publication, Document de travail hal-03621611v1

HDR (1)

Variational principles in nonlinear mechanics using convex optimization and automated numerical tools Jeremy Bleyer Materials and structures in mechanics [physics.class-ph]. Institut Polytechnique de Paris, 2024 HDR tel-04804726v1