joel alexis

Publications

Article dans une revue (75)

Influence of the scanning strategy on the microstructure and the tribological behavior of a Ni-based superalloy processed by L-PBF additive manufacturing Pierre-Nicolas Parent,Jean-yves Paris,Joel Alexis,Christine Boher Wear, 2025, 564-565, pp.205671. ⟨10.1016/j.wear.2024.205671⟩ Article dans une revue hal-04831131v1
Optimizing laser weldability of heat-treatable and non-heat-treatable aluminum alloys: a comprehensive study Jean-Denis Béguin,Yannick Balcaen,Jade Pécune,Nathalie Aubazac,Joël Alexis Journal of Manufacturing and Materials Processing, 2025, 9 (9), pp.290. ⟨10.3390/jmmp9090290⟩ Article dans une revue hal-05224532v1
Role of crystallographic and morphological textures on wear resistance of an additive-manufactured Ni-based superalloy Pierre-Nicolas Parent,Jean-Yves Paris,Joel Alexis,Christine Boher Wear, 2025, 570, pp.205894. ⟨10.1016/j.wear.2025.205894⟩ Article dans une revue hal-04957518v1
Near-Equilibrium Transformation Sequence of NiCrBSi Self-Fluxing Nickel Alloy Anthony Ty,Yannick Balcaen,Morgane Mokhtari,Andrew Fitch,Olivier Dalvernyet al. Metallurgical and Materials Transactions A, 2025, 56, pp.1690 - 1705. ⟨10.1007/s11661-025-07732-5⟩ Article dans une revue hal-05457992v1
Performance evaluation of Charpy impact tests to investigate and detect process defects of a Ni-based superalloy elaborated by laser powder bed fusion A. Ty,M. Mokhtari,Y. Balcaen,A. Votié,J.-M. Clouéet al. Journal of Materials Research and Technology, 2023, 25, pp.6644-6659. ⟨10.1016/j.jmrt.2023.07.064⟩ Article dans une revue hal-04275257v1
Damage Mechanism of Trivalent Chromium Coatings under Tensile Stress Robin Guillon,Yannick Balcaen,Benoit Fori,Celine Gazeau,Olivier Dalvernyet al. Coatings, 2023, 13 (7), pp.1194. ⟨10.3390/coatings13071194⟩ Article dans une revue hal-04274936v1
Physico-chemical characterisation and tribological behaviour of ground micro-arc oxidation coating on aluminium alloy – Comparison with hard anodised oxidation Louis Rodriguez,Aurélien Vieu,Marion Balsarin,Philippe Combes,Joël Alexiset al. Wear, 2023, 516-517, pp.204591. ⟨10.1016/j.wear.2022.204591⟩ Article dans une revue hal-04061749v1
An Estimation of Local Residual Stresses in Amorphous and Crystallized Trivalent Chromium Coatings Robin Guillon,Cédric Stéphan,Yannick Balcaen,Claudie Josse,Benoit Foriet al. Coatings, 2023, 13 (1), pp.124. ⟨10.3390/coatings13010124⟩ Article dans une revue hal-04317950v1
Material Health of NiCrBSi Alloy Parts Produced via the Laser Powder Bed Fusion Process Anthony Ty,Yannick Balcaen,Morgane Mokhtari,Jordan Rigaud,Olivier Dalvernyet al. Metals, 2023, 13 (10), pp.1669. ⟨10.3390/met13101669⟩ Article dans une revue hal-04276691v1
In Situ Ageing with the Platform Preheating of AlSi10Mg Alloy Manufactured by Laser Powder-Bed Fusion Process Nicolas Chambrin,Olivier Dalverny,Jean-Marc Cloue,Olivier Brucelle,Joel Alexis Metals, 2022, 12 (12), pp.2148. ⟨10.3390/met12122148⟩ Article dans une revue hal-03965944v1
Cold Spraying of Thick Biomimetic and Stoichiometric Apatite Coatings for Orthopaedic Implants Ambra Paterlini,Joël Alexis,Yannick Balcaen,Ghislaine Bertrand Coatings, 2022, 12 (6), pp.722. ⟨10.3390/coatings12060722⟩ Article dans une revue hal-05004772v1
Effects of welding parameters on the microstructure and mechanical properties of the AA6061 aluminium alloy joined by a Yb: YAG laser beam Ameth Faye,Yannick Balcaen,Loïc Lacroix,Joël Alexis Journal of Advanced Joining Processes, 2021, 3, pp.1-11. ⟨10.1016/j.jajp.2021.100047⟩ Article dans une revue hal-03541452v1
Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes Morgane Mokhtari,Pierrick Pommier,Yannick Balcaen,Joel Alexis Journal of Manufacturing and Materials Processing, 2021, 5, ⟨10.3390/jmmp5040136⟩ Article dans une revue hal-03845360v1
Additive manufacturing of Ti6Al4V with wire laser metal deposition process Achraf Ayed,Guénolé Bras,Henri Bernard,Pierre Michaud,Yannick Balcaenet al. Materials Science Forum, 2021, 1016, pp.24-29. ⟨10.4028/www.scientific.net/MSF.1016.24⟩ Article dans une revue hal-03565903v1
Study of the impact of the synergic line and the strategy of conception on Ti-6Al-4V wire arc additive manufacturing process (WAAM-CMT) Achraf Ayed,Guénolé Bras,Henri Bernard,Pierre Michaud,Yannick Balcaenet al. Materials Science Forum, 2021, 1016, pp.250-255. ⟨10.4028/www.scientific.net/MSF.1016.250⟩ Article dans une revue hal-03565907v1
Evaluation of direct printed heat sinks on metallized ceramic substrate for high-performance power modules Rabih Khazaka,Elodie Martin,Joël Alexis,Donatien Martineau,Stephane Azzopardi IEEE Transactions on Components, Packaging and Manufacturing Technology, 2021, 11 (6), pp.955-962. ⟨10.1109/TCPMT.2021.3074652⟩ Article dans une revue hal-03541450v1
Autogenous Yb:YAG laser disk welding domain of AA6061-T4 aluminium alloy Ameth Faye,Yannick Balcaen,Loïc Lacroix,Joël Alexis International Journal of Engineering Research & Science, 2020, 6 (9), pp.0. ⟨10.5281/zenodo.4059102⟩ Article dans une revue hal-03565913v1
Effect of silver and strontium incorporation route on hydroxyapatite coatings elaborated by rf-SPS Marine Chambard,Djamel Remache,Yannick Balcaen,Olivier Dalverny,Joël Alexiset al. Materialia, 2020, 12, pp.100809. ⟨10.1016/j.mtla.2020.100809⟩ Article dans une revue hal-03218463v1
Experimental SAC305 shear stress-strain hysteresis loop construction using Hall's one-dimensional model based on strain gages measurements Jean-Baptiste Libot,Joël Alexis,Olivier Dalverny,Lionel Arnaud,Philippe Milesiet al. Journal of Electronic Packaging, 2019, 141 (2), pp.021002-1-021002-15. ⟨10.1115/1.4042806⟩ Article dans une revue hal-02359785v1
Mechanical adhesion of SiO2 thin films onto polymeric substrates Caroline Ho,Joël Alexis,Olivier Dalverny,Yannick Balcaen,Anita Dehouxet al. Surface Engineering, 2019, 35 (6), pp.536-541. ⟨10.1080/02670844.2018.1528689⟩ Article dans une revue hal-02359798v1
Yb: YAG laser welding of aeronautical alloys Joel Alexis,Jean Denis Beguin,Pablo Cerra,Yannick Balcaen Materials Science Forum, 2018, 941, pp.1099-1104. ⟨10.4028/www.scientific.net/MSF.941.1099⟩ Article dans une revue hal-02359734v1
Laser welding of titanium alloys with an Yb: YAG sisk source Jean-Denis Béguin,Valentin Gazagne,Yannick Balcaen,Joël Alexis,Eric Andrieu Materials Science Forum, 2018, 941, pp.845-850. ⟨10.4028/www.scientific.net/MSF.941.845⟩ Article dans une revue hal-02356317v1
Corrosion behaviour of AA 1370 strands for wires: Identification of the critical metallurgical parameters Rosanne Gravina,Claudie Josse,Bernard Viguier,Adrien Laurino,Joël Alexiset al. Corrosion Science, 2018, 134, pp.112-121. ⟨10.1016/j.corsci.2018.02.016⟩ Article dans une revue hal-01989439v1
Effect of actual and accelerated ageing on microstructure evolution and mechanical properties of a 2024-T351 aluminium alloy Manida Prudhomme,F. Billy,Joel Alexis,G. Benoit,F. Hamonet al. International Journal of Fatigue, 2018, 107, pp.60-71. ⟨10.1016/j.ijfatigue.2017.10.015⟩ Article dans une revue hal-02294471v1
Microstructural evolutions of Sn-3.0Ag-0.5Cu solder joints during thermal cycling Jean-Baptiste Libot,Joël Alexis,Olivier Dalverny,Lionel Arnaud,Philippe Milesiet al. Microelectronics Reliability, 2018, 83, pp.64-76. ⟨10.1016/j.microrel.2018.02.009⟩ Article dans une revue hal-02359737v1
Adhesion characterization of SiO2 thin films evaporated onto a polymeric substrate Caroline Ho,Anita Dehoux,Loïc Lacroix,Joël Alexis,Olivier Dalvernyet al. International Journal of Engineering Research & Science, 2018, 4 (2), pp.38-46. ⟨10.5281/zenodo.1187695⟩ Article dans une revue hal-03510157v1
Influence of Yb:YAG laser beam parameters on Haynes 188 weld fusion zone microstructure and mechanical properties Jérémie Graneix,Jean-Denis Béguin,Joël Alexis,Talal Masri Metallurgical and Materials Transactions B, 2017, vol. 48 (n°4), pp. 2007-2016. ⟨10.1007/s11663-017-0989-6⟩ Article dans une revue hal-01635647v1
Mechanical behavior and adhesion of the Ti/Cr/Au metallization scheme on diamond substrate Sabeur Msolli,Joël Alexis,Heungsoo Kim Advanced Engineering Materials, 2017, 19 (8), pp.1700109. ⟨10.1002/adem.201700109⟩ Article dans une revue hal-01658017v1
Identification of damage and fracture modes in power electronic packaging from experimental micro-shear tests and finite element modeling Sabeur Msolli,Ahlem Baazaoui,Joël Alexis,Heung Soo Kim Engineering Fracture Mechanics, In press, ⟨10.1016/j.engfracmech.2017.09.014⟩ Article dans une revue hal-01657952v1
Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy Mathilde Guérin,Joël Alexis,Eric Andrieu,Lydia Laffont,Williams Lefebvreet al. Corrosion Science, 2016, 102, pp.291-300. ⟨10.1016/j.corsci.2015.10.020⟩ Article dans une revue hal-01264384v1
A Comparison between an Advanced High-Strength Steel and a High-Strength Steel Due to the Spring back Effect Erika Aparecida Da Silva,Luiz Fernando Vargas Malerba Fernandes,José Wilson De Jesus Silva,Rosinei Batista Ribeiro,Marcelo Dos Santos Pereiraet al. IOSR Journal of Mechanical and Civil Engineering, 2016, vol. 13 (n° 05), pp. 21-27. ⟨10.9790/1684-1305012127⟩ Article dans une revue hal-01449175v1
Assessment of candidate metallization systems deposited on diamond using nano-indentation and nano-scratching tests Sabeur Msolli,Joël Alexis,Heung Soo Kim,Olivier Dalverny,Moussa Karama Thin Solid Films, 2016, vol. 619, pp. 53-60. ⟨10.1016/j.tsf.2016.10.022⟩ Article dans une revue hal-01449172v1
Low cycle biaxial fatigue behavior of direct aged Nickel-based 718 superalloy Pierre Selva,Bernard Lorrain,Joël Alexis,Alexandre Seror,Arnaud Longuetet al. International Journal of Engineering Research and Applications, 2016, vol. 6 (n° 3), pp. 1-8 Article dans une revue hal-01449174v1
Corrosion-fatigue lifetime of Aluminium–Copper–Lithium alloy 2050 in chloride solution Mathilde Guérin,Joël Alexis,Eric Andrieu,Christine Blanc,Grégory Odemer Materials & Design, 2015, 87, pp.681-692. ⟨10.1016/j.matdes.2015.08.003⟩ Article dans une revue hal-01264391v1
Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimens Jose Antonio Travieso-Rodríguez,Giovanni Gomez-Gras,Gilles Dessein,Francisco Carrillo,Joël Alexiset al. International Journal of Advanced Manufacturing Technology, 2015, 81 (9), pp.1757-1765. ⟨10.1007/s00170-015-7255-3⟩ Article dans une revue hal-01264397v1
Multiaxial fatigue analysis of a high performance Nickel-based superalloy Pierre Selva,Bernard Lorrain,Joël Alexis,Alexandre Seror,Arnaud Longuetet al. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 2015, 9 (4), pp.544-549 Article dans une revue hal-02134675v1
Experimental characterization of the mechanical behavior of two solder alloys for high temperature power electronics applications Sabeur Msolli,Joël Alexis,Olivier Dalverny,Moussa Karama Microelectronics Reliability, 2015, n°55, pp. 164-171. ⟨10.1016/j.microrel.2014.09.021⟩ Article dans une revue hal-01212091v1
Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process Jose Antonio Travieso-Rodríguez,Giovanni Gomez-Gras,Jordi Jorba-Peiro,Francisco Carrillo,Gilles Desseinet al. Materials and Manufacturing Processes, 2015, 30 (12), pp.1490-1497. ⟨10.1080/10426914.2015.1019114⟩ Article dans une revue hal-01264401v1
Experimental and Numerical Study of Interfacial Fracture Parameters of a Brazed Joints Ahlem Baazaoui,Thibaut Fourcade,Olivier Dalverny,Joël Alexis,Moussa Karama Advanced Materials Research, 2015, vol. 1099, pp. 9-16. ⟨10.4028/www.scientific.net/AMR.1099.9⟩ Article dans une revue hal-01135046v1
Weldability of superalloys Hastelloy X by Yb : YAG laser Jérémie Graneix,Jean-Denis Béguin,Joël Alexis,Talal Masri Advanced Materials Research, 2015, vol. 1099, pp. 61 -70. ⟨10.4028/www.scientific.net/AMR.1099.61⟩ Article dans une revue hal-01135068v1
The influence of artificial ageing on the corrosion behaviour of a 2050 aluminium-copper-lithium alloy Vincent Proton,Joel Alexis,Eric Andrieu,J. Delfosse,A. Deschampset al. Corrosion Science, 2014, 80, pp.494-502. ⟨10.1016/j.corsci.2013.11.060⟩ Article dans une revue istex hal-00963754v1
Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings Imane Demnati,David Grossin,Olivier Marsan,Ghislaine Bertrand,Gérard Collongeset al. Open biomedical engineering journal, 2014, vol. 9 (suppl.1-M3), pp. 26-39. ⟨10.2174/1874120701509020026⟩ Article dans une revue hal-01135272v1
Effect of varying conditions of exposure to an aggressive medium on the corrosion behavior of the 2050 Al--Cu--Li alloy Mathilde Guérin,Eric Andrieu,Grégory Odemer,Joël Alexis,Christine Blanc Corrosion Science, 2014, vol. 85, pp. 455-470. ⟨10.1016/j.corsci.2014.04.042⟩ Article dans une revue hal-01024706v1
Effect of the microstructure and environmental exposure conditions on the corrosion behaviour of the 2050 alloy Mathilde Guérin,Eric Andrieu,Grégory Odemer,Joël Alexis,Christine Blanc Materials Science Forum, 2014, 794-796, pp.205-210. ⟨10.4028/www.scientific.net/MSF.794-796.205⟩ Article dans une revue hal-03217900v1
Propagation of Intergranular Corrosion Defects in AA 2024-T351 Evaluated by a Decrease in Mechanical Resistance Céline Larignon,Joël Alexis,Eric Andrieu,Grégory Odemer,Christine Blanc Journal of The Electrochemical Society, 2014, vol. 161 (n° 6), pp.C339-C348. ⟨10.1149/2.090406jes⟩ Article dans une revue hal-01164873v1
Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint Vincent Proton,Joël Alexis,Eric Andrieu,Jérôme Delfosse,Marie-Christine Lafontet al. Corrosion Science, 2013, vol. 73, pp. 130-142. ⟨10.1016/j.corsci.2013.04.001⟩ Article dans une revue hal-00932432v1
Application of Kelvin probe Force Microscopy (KFM) to evidence localized corrosion of over-aged aeronautical 2024 aluminum alloy Nicoleta Radutoiu,Joël Alexis,Loïc Lacroix,Marioara Abrudeanu,Jacques-Alain Petit Key Engineering Materials, 2013, vol. 550, pp. 127-134. ⟨10.4028/www.scientific.net/KEM.550.127⟩ Article dans une revue hal-00854415v1
Investigation of Kelvin probe force microscopy efficiency for the detection of hydrogen ingress by cathodic charging in an aluminium alloy Céline Larignon,Joël Alexis,Eric Andrieu,Loïc Lacroix,Grégory Odemeret al. Scripta Materialia, 2013, vol. 68, pp. 479-482. ⟨10.1016/j.scriptamat.2012.11.026⟩ Article dans une revue hal-00784218v1
Study of the influence of the artificial ageing temperature on the AA2024 alloy microstructure Nicoleta Radutoiu,Joël Alexis,Loïc Lacroix,Marioara Abrudeanu,Jacques-Alain Petit Key Engineering Materials, 2013, vol. 550, pp. 115-125. ⟨10.4028/www.scientific.net/KEM.550.115⟩ Article dans une revue hal-00835701v1
Development of nickel phosphorus coatings containing micro particles of talc phyllosilicates Joël Alexis,Clélia Gaussens,Bernard Etcheverry,Jean-Pierre Bonino Materials Chemistry and Physics, 2013, pp. 723-733. ⟨10.1016/j.matchemphys.2012.09.049⟩ Article dans une revue hal-00828234v1
Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy Céline Larignon,Joël Alexis,Eric Andrieu,Loïc Lacroix,Grégory Odemeret al. Electrochimica Acta, 2013, vol. 110, pp. 484-490. ⟨10.1016/j.electacta.2013.02.063⟩ Article dans une revue hal-00840478v1
Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements Thibaut Fourcade,Adrien Broué,Jeremie Dehnnin,Jean-Michel Desmarres,Cédric Seguineauet al. Key Engineering Materials, 2013, vol. 550, pp. 157-164. ⟨10.4028/www.scientific.net/KEM.550.157⟩ Article dans une revue hal-00840574v1
The contribution of hydrogen to the corrosion of 2024 aluminium alloy exposed to thermal and environmental cycling in chloride media Céline Larignon,Joël Alexis,Eric Andrieu,Grégory Odemer,Christine Blanc Corrosion Science, 2013, 69, pp.211-220. ⟨10.1016/j.corsci.2012.12.005⟩ Article dans une revue hal-03526653v1
Micro-Scale Modeling of Carbon-Fiber Reinforced Thermoplastic Materials Fethi Abbassi,Abderraouf Gherissi,Ali Zghal,Sébastien Mistou,Joël Alexis Applied Mechanics and Materials, 2012, vol. 146, pp.1-11. ⟨10.4028/www.scientific.net/AMM.146.1⟩ Article dans une revue hal-00789382v1
Effect of the over-ageing treatment on the mechanical properties of AA2024 aluminum alloy. Nicoleta Radutoiu,Joël Alexis,Loïc Lacroix,Jacques-Alain Petit,Marioara Abrudeanuet al. Revista de chimie (chemistry magazine), 2012, Vol. 63, pp. 1042-1045 Article dans une revue hal-00863168v1
An assessment of contact metallization for high power and high temperature diamond Schottky devices Sodjan Koné,Henri Schneider,Karine Isoird,Fabien Thion,Jocelyn Achardet al. Diamond and Related Materials, 2012, vol. 27-28, pp. 23-28. ⟨10.1016/j.diamond.2012.05.007⟩ Article dans une revue hal-00881007v1
Effects of the Unified Viscoplastic Formulation and Temperature Terms on the Thermomechanical Behavior of Soldering Materials Sabeur Msolli,Olivier Dalverny,Joël Alexis,Moussa Karama Key Engineering Materials, 2012, vol. 498, pp. 219-226. ⟨10.4028/www.scientific.net/KEM.498.219⟩ Article dans une revue hal-00782651v1
Experimental and mechanical characterizations of a lead free solder alloy for electronic devices Sabeur Msolli,Olivier Dalverny,Joël Alexis,Moussa Karama Advanced Materials Research, 2012, vol. 423, pp. 210-217. ⟨10.4028/www.scientific.net/AMR.423.210⟩ Article dans une revue hal-00738764v1
Implicit integration scheme for porous viscoplastic potential-based constitutive equations Sabeur Msolli,Olivier Dalverny,Joël Alexis,Moussa Karama Procedia Engineering, 2011, vol. 10, pp. 1544-1549. ⟨10.1016/j.proeng.2011.04.258⟩ Article dans une revue hal-00756328v1
Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy Yannick Balcaen,Nicoleta Radutoiu,Joël Alexis,Jean-Denis Béguin,Loïc Lacroixet al. Surface and Coatings Technology, 2011, vol. 206, pp. 1684-1690. ⟨10.1016/j.surfcoat.2011.09.056⟩ Article dans une revue hal-00866330v1
Corrosion Damages Induced by Cyclic Exposure of 2024 Aluminum Alloy in Chloride-Containing Environments Céline Larignon,Joël Alexis,Eric Andrieu,Christine Blanc,Grégory Odemeret al. Journal of The Electrochemical Society, 2011, 158 (6), pp.C284-C295. ⟨10.1149/1.3610401⟩ Article dans une revue hal-03542106v1
Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint Vincent Proton,Joël Alexis,Eric Andrieu,Christine Blanc,Jérôme Delfosseet al. Journal of The Electrochemical Society, 2011, 158 (5), pp.C139-C147. ⟨10.1149/1.3562206⟩ Article dans une revue hal-03540560v1
Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy Vincent Dutilh,Gilles Dessein,Joël Alexis,Géraldine Perrin Advanced Materials Research, 2010, vol. 112, pp.171-178. ⟨10.4028/www.scientific.net/AMR.112.171⟩ Article dans une revue hal-00800060v1
Structure, morphology and mechanical properties of electrodeposited composite coatings NiâP/SiC Joël Alexis,Bernard Etcheverry,Jean-Denis Béguin,Jean-Pierre Bonino Materials Chemistry and Physics, 2010, vol. 120, pp. 244-250. ⟨10.1016/j.matchemphys.2009.12.013⟩ Article dans une revue hal-00760126v1
Mechanical and Surface Properties of Chemical Vapor Deposited Protective Aluminium Oxide Films on TA6V Alloy Diane Samélor,Maëlenn Aufray,Loic Lacroix,Yannick Balcaen,Joël Alexiset al. Advances in Science and Technology, 2010, 66, pp.66-73. ⟨10.4028/www.scientific.net/AST.66.66⟩ Article dans une revue hal-02074314v1
Evaluation of the Local Chloride Concentration and the Local Mechanical Stresses in Intergranular Damages Grown on a 2024 Aluminum Alloy Céline Larignon,Joël Alexis,Eric Andrieu,Christine Blanc,Grégory Odemer ECS Transactions, 2010, 33 (35), pp.39-51. ⟨10.1149/1.3577752⟩ Article dans une revue hal-03474242v1
Electrical and mechanical characterisation of Si/Al ohmic contacts on diamond Gabriel Civrac de Fabian,Sabeur Msolli,Joël Alexis,Olivier Dalverny,Henri Schneider Electronics Letters, 2010, 46 (11), pp.791-793. ⟨10.1049/el.2010.0803⟩ Article dans une revue hal-03474199v1
Characterization of the aerosol produced by infrared femtosecond laser ablation of polyacrylamide gels for the sensitive inductively coupled plasma mass spectrometry detection of selenoproteins F. Claverie,Christophe Pécheyran,Sandra Mounicou,G. Ballihaut,B. Fernandezet al. Spectrochimica Acta Part B: Atomic Spectroscopy, 2009, 64 (7), pp.649-658. ⟨10.1016/j.sab.2009.05.027⟩ Article dans une revue hal-01560756v1
Elemental fractionation effects in high repetition rate IR femtosecond laser ablation ICP-MS analysis of glasses Fanny Claverie,Beatriz Fernandez Garcia,Christophe Pécheyran,Joël Alexis,Olivier François Xavier Donard Journal of Analytical Atomic Spectrometry, 2009, 24 (7), pp.891-902. ⟨10.1039/B904134F⟩ Article dans une revue hal-01977486v1
Direct determination of trace elements in powdered samples by in-cell isotope dilution femtosecond laser ablation ICPMS B. Fernandez,Fanny Claverie,Christophe Pécheyran,Joel Alexis,Olivier François Xavier Donard Analytical Chemistry, 2008, vol. 80 (n° 18), pp. 6981-6994. ⟨10.1021/ac800862p⟩ Article dans une revue hal-01590322v1
Modélisation des assemblages de ballons pressurisés stratosphériques Pierre Selva,Olivier Dalverny,Sebastien Mistou,Moussa Karama,Joël Alexiset al. Mechanics & Industry, 2008, vol. 9, pp. 159-165. ⟨10.1051/meca:2008021⟩ Article dans une revue hal-00796649v1
Élaboration de céramiques sans ajouts de frittage par Spark Plasma Sintering pour application en électronique de puissance Sélim Dagdag,Joël Alexis,Jacques-Alain Petit,Marc Ferrato,Jean Galy Matériaux et Techniques, 2007, vol. 95, pp. 297-306. ⟨10.1051/mattech:2008014⟩ Article dans une revue istex hal-00840337v1
Environmental protection of titanium alloys in centrifugal compressors at 500°C in saline atmosphere Jean-Denis Béguin,Pierre Faure,Denise Adrian,Joël Alexis,Jacques-Alain Petitet al. Surface Engineering, 2004, vol. 20, pp. 135-138. ⟨10.1179/026708404225010685⟩ Article dans une revue hal-00842830v1
Adherence of electrodeposited Zn-Ni coatings on EN AW2024 T3 aluminium alloy Joël Alexis,Denise Adrian,Talal Masri,Jacques-Alain Petit Surface Engineering, 2004, 20 (2), pp.121-127. ⟨10.1179/026708404225010748⟩ Article dans une revue hal-03601845v1
Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C Philippe Lours,Joël Alexis,Gérard Bernhart Journal of Materials Science Letters, 1998, 17 (13), pp.1089-1093. ⟨10.1023/A:1006675814903⟩ Article dans une revue istex hal-01686704v1

Communication dans un congrès (33)

Anand model calibration for SAC305 solder joints based on the evolution of the shear stress and strain hysteresis loops for different thermal cycling conditions Jean-Baptiste Libot,Zoé Bussière,Lara Mahfouz,Joël Alexis,Olivier Dalverny 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Apr 2023, Graz, Australia. pp.1-12, ⟨10.1109/EuroSimE56861.2023.10100843⟩ Communication dans un congrès hal-04275342v1
Direct heat sink printing on metallized ceramic substrate for power electronics applications: heat treatment identification and its impacts Elodie Catherine Martin,Rabih Khazaka,Donatien Martineau,Stephane Azzopardi,Joël Alexis 11th International Conference on Integrated Power Electronics Systems, Mar 2020, Berlin, Germany. pp.1-5 Communication dans un congrès hal-03541453v1
Experimental strain energy density dissipated in SAC305 solder joints during different thermal cycling conditions using strain gages measurements Jean-Baptiste Libot,Frédéric Dulondel,Philippe Milesi,Joël Alexis,Lionel Arnaudet al. IEEE 68th Electronic Components and Technology Conference, May 2018, San Diego, United States. pp.748-755, ⟨10.1109/ECTC.2018.00116⟩ Communication dans un congrès hal-02359827v1
Automation of a creep-testing machine for research activities Baptiste Trajin,Yannick Balcaen,Joël Alexis International Conference on Research and Education in Mechatronics (REM), Jun 2018, Delft, Netherlands. pp.0 Communication dans un congrès hal-01944240v1
Thermo-mechanical behavior of power electronic packaging assemblies: From characterization to predictive simulation of lifetimes Olivier Dalverny,Joël Alexis 7th International Conference on Structural Analysis of Advanced Materials, ICSAAM 2017, Sep 2017, Bucharest, Romania. pp.030009, ⟨10.1063/1.5024159⟩ Communication dans un congrès hal-02359830v1
FE simulation of interfacial delamination between SiO2 thin film and polymeric substrate Caroline Ho,Amèvi Tongne,Olivier Dalverny,Joël Alexis,Loïc Lacroixet al. European Congress and Exhibition on Advanced Materials, EuroMat 2017, Sep 2017, Thessaloniki, Greece. pp.0 Communication dans un congrès hal-02359883v1
Mechanical fatigue assessment of SAC305 solder joints under harmonic and random vibrations Jean-Baptiste Libot,Lionel Arnaud,Olivier Dalverny,Joël Alexis,Philippe Milesiet al. 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2016), Apr 2016, Dresden, Germany. pp. 1-8, ⟨10.1109/EuroSimE.2016.7463294⟩ Communication dans un congrès hal-01449177v1
Mechanical adhesion of SIO2 thin film on a polymeric substrate under compressive stress Caroline Ho,Anita Dehoux,Loïc Lacroix,Joël Alexis,Olivier Dalvernyet al. XXXI International Conference on Surface Modification Technologies (SMT31), Jul 2016, Mons, Belgium. pp.1-10 Communication dans un congrès hal-02359832v1
Parametric identification of elastic-plastic constitutive laws using spherical indentation Thibaut Fourcade,Olivier Dalverny,Joël Alexis,Cédric Seguineau,Jean-Michel Desmarres 5th International Symposium on Aircraft Materials - ACMA 2014, Apr 2014, Marrakech, Morocco. pp. 1-8 Communication dans un congrès hal-03667152v1
A comparative study of microscratch and microtensile adhesion tests for nickel coatings on various substrates Patrick Nguyen,Cédric Seguineau,Jean-Michel Desmarres,Talal Masri,Joël Alexis DTIP 2-4 April 2014,, Apr 2014, Cannes, France. pp.0 Communication dans un congrès hal-04080168v1
Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017 Jose Antonio Travieso-Rodríguez,Hernan Alberto González-Rojas,Giovanni Gomez-Gras,Gilles Dessein,Joël Alexis 17th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology, Sep 2013, Istanbul, Turkey Communication dans un congrès hal-00933397v1
Study and mechanical characterization of high temperature power electronic packaging Ahlem Baazaoui,Olivier Dalverny,Joel Alexis,Moussa Karama CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03440495v1
Numerical modeling and prediction of thermomechanical degradation of power electronic packaging Ahlem Baazaoui,Olivier Dalverny,Joël Alexis,Moussa Karama ICSAAM 2013, The 5th International Conference on Structural Analysis of Advanced Materials, Sep 2013, Island of Kos, Greece Communication dans un congrès hal-00944556v1
Etude expérimentale du soudage par laser YAG de l'alliage base nickel Hastelloy X Jérémie Graneix,Jean-Denis Béguin,François Pardeilhan,Talal Masri,Joël Alexis Journées Annuelles de la SF2M, Oct 2013, Villeneuve d'Ascq, France. pp.0, ⟨10.1051/matecconf/20130702011⟩ Communication dans un congrès hal-04003308v1
Caractérisation expérimentale du comportement mécanique d’assemblage haute température pour l’électronique de puissance Ahlem Baazaoui,Joël Alexis,Olivier Dalverny,Moussa Karama Journées annuelles de la SF2M, Oct 2013, Villeuve d'Ascq, France. pp.0, ⟨10.1051/matecconf/20130702013⟩ Communication dans un congrès hal-04003305v1
Study of the localized corrosion of over-aged aeronautical 2024 aluminum alloy. Kelvin probe Force Microscopy (KFM) application Nicoleta Radutoiu,Loïc Lacroix,Joël Alexis,Marioara Abrudeanu,Jacques-Alain Petit ACMA 2012, May 2012, Fez, Morocco Communication dans un congrès hal-00933398v1
Corrosion and stress corrosion cracking behaviour of 2050 aluminium-lithium alloy joined by friction stir welding (FSW) Vincent Proton,Joël Alexis,Eric Andrieu,Grégory Odemer,Christine Blancet al. EUROCORR 2012, Sep 2012, Istanbul, Turkey. pp.0 Communication dans un congrès hal-04104017v1
Etude du comportement mécanique des joints de brasure Au-Ge pour le report des composants SiC pour l'électronique de puissance haute température Alioune Cisse,Gregor Massiot,Catherine Munier,Paul-Etienne Vidal,Francisco Carrilloet al. 14ème édition de la Conférence Electronique de Puissance du Futur, Jul 2012, Bordeaux, France Communication dans un congrès hal-00944560v1
Viscoplastic behavior of diamond die attach subjected to high temperature conditions Sabeur Msolli,Ahlem Baazaoui,Olivier Dalverny,Joël Alexis,Moussa Karama 13th International conference on thermal, mechanical and multi-physics simulation and experiments in microelectronics and microsystems, EuroSimE 2012, Apr 2012, Lisbon, Portugal. pp.1-6 Communication dans un congrès hal-04003394v1
Focus on the interactions between artificial microstructural ageing and susceptibility to localized corrosion under cyclic corrosion tests of an aeronautic 2024-T351 aluminium alloy Céline Larignon,Eric Andrieu,Joël Alexis,Grégory Odemer,Christine Blanc EUROCORR 2012, Sep 2012, Istanbul, Turkey. pp.0 Communication dans un congrès hal-04086637v1
Implémentation d'une loi de comportement basée sur un potentiel viscoplastique couplé à l'endommagement poreux: application à un alliage d'électronique de puissance Sabeur Msolli,Olivier Dalverny,Joel Alexis,Moussa Karama CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France Communication dans un congrès hal-03422655v1
Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy Vincent Dutilh,Andreï Popa,Gilles Dessein,Joël Alexis,Géraldine Perrin CIRP ICME '10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, Jun 2010, Capri, Italy Communication dans un congrès hal-00944562v1
Mechanical and Surface Properties of Chemical Vapour Deposited Protective Aluminium Oxide Films on TA6V Alloy Diane Samélor,Maëlenn Aufray,Loïc Lacroix,Yannick Balcaen,Joël Alexiset al. CIMTEC 2010 - 12th International Ceramics Congress Part E, Jun 2010, Montecatini Terme, Italy. pp.66-73 Communication dans un congrès hal-04093346v1
Micro-scale modeling of carbon-fiber reinforced thermoplastic materials Abderraouf Gherissi,Fethi Abbassi,Ali Zghal,Sebastien Mistou,Joël Alexis 5th International Conference on Advances in Mechanical Engineering and Mechanics, Dec 2010, Hammamet, Tunisia Communication dans un congrès hal-00944565v1
Mechanical characterization of an Au-Ge solder alloy for high temperature electronic devices Sabeur Msolli,Olivier Dalverny,Joël Alexis,Moussa Karama 6th International Conference on Integrated Power Electronics Systems (CIPS), Mar 2010, Nuremberg, Germany Communication dans un congrès hal-00933399v1
Potabilisation de l’eau par filtration membranaire : étude expérimentale des mécanismes de transfert des bactéries à travers la structure poreuse. Christel Causserand,Christine Roques,Joël Alexis,Nathalie Lebleu,Pierre Aimar 11ème Congrès de la Société Française de Génie des Procédés, Oct 2007, Saint-Etienne, France. pp.0 Communication dans un congrès hal-04106093v1
Characterization of refractory titanium alloys welded by TIG and laser processes Cyrille Ferdinand,Joël Alexis,Talal Masri,Jacques-Alain Petit,Jean-Christophe Ganza 11th World Conference on Titanium, Jun 2007, Kyoto, Japan. pp.1361-1364 Communication dans un congrès hal-04030525v1
Adherence of coatings: determination - problems - examples Joël Alexis,Bernard Etcheverry 21st international conference on surface modification technologies, Sep 2007, Paris, France. pp.0 Communication dans un congrès hal-04106648v1
Modélisation des assemblages de ballons pressurisés stratosphériques Pierre Selva,Olivier Dalverny,Sébastien Mistou,Moussa Karama,Joël Alexiset al. 8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France Communication dans un congrès hal-01492457v1
Composite Coatings with Talc Particles Jean-Pierre Bonino,Stéphane Vaillant,François Martin,Patrice Bacchin,Joël Alexis Vth International Colloquium on Chromium Plating, May 2004, Saint-etienne, France Communication dans un congrès hal-00201703v1
Deposition of Aluminium Nitride films by Plasma enhanced chemical vapour deposition Sélim Dagdag,Joel Alexis,J.D. Beguin,J.A. Petit,V. Rouessacet al. 18th Int. Conf. on Surface Modification Technologies (SMT18), Nov 2004, Dijon, France Communication dans un congrès hal-01741696v1
Un procédé conventionnel pour de nouveaux matériaux :les revêtements composites métal / particules Jean-Pierre Bonino,Pierre Bares,Patrice Bacchin,Jocelyne Ferret,Stéphane Vaillantet al. SURFAIR 2004, Jun 2004, Toulouse, France Communication dans un congrès hal-00201720v1
High temperature oxidation behaviour and creep properties of ods alloy PM2000 Philippe Lours,Joël Alexis,Gérard Bernhart 14th international plansee seminar, May 1997, Reutte, Austria. p.869-886 Communication dans un congrès hal-01799155v1

Chapitre d'ouvrage (1)

Effects of WAAM Process Parameters on Metallurgical and Mechanical Properties of Ti-6Al-4V Deposits Achraf Ayed,A. Valencia,Guénolé Bras,Henri Bernard,Yannick Balcaenet al. Advances in Materials, Mechanics and Manufacturing, pp.26-35, 2019, ⟨10.1007/978-3-030-24247-3_4⟩ Chapitre d'ouvrage hal-02485067v1

Poster de conférence (1)

Understanding mechanisms of adhesion of SiO2 thin films evaporated on a polymeric substrate Caroline Ho,Anita Dehoux,Joël Alexis,Loïc Lacroix,Olivier Dalvernyet al. 43th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), Apr 2016, San Diego, United States. Proceedings of the 43th International Conference on Metallurgical Coatings and Thin Films (ICMCTF), pp.0, 2016 Poster de conférence hal-02387348v1