Katia Mocellin
82
Documents
Presentation
Prof. , Maître de Recherche - HDR
---------------------------------
Chef de groupe de l'équipe Mécanique Numérique des Solides[ - CSM](http://www.cemef.mines-paristech.fr/sections/recherche/equipes-recherche/mecanique-numerique/equipe-mecanique)
Responsable du Mastère spécialisé [MaPMod](http://www.cemef.mines-paristech.fr/sections/formations/masteres-specialises/ms-mapmod)
Domaines de recherche :
-----------------------
- Modélisation numérique des procédés de mise en forme et d’assemblages mécaniques.
- Développement de méthodes numériques pour la réduction des temps de calcul
- Couplages multiphysiques pour les procédés de mise en forme hybride
### Formation
2011
HDR, Université de Valenciennes et du Hainault Cambrésis
1995-1999
Thèse à l’Ecole des Mines de Paris, Sophia Antipolis
1995
DEA d’Analyse Numérique - Université Claude Bernard, Lyon
1994
DESS d’Ingénierie Mathématique (Major de promotion) - Université de Savoie, Chambéry
### Parcours Professionnel
depuis 2013
Maître de Recherche MINES ParisTech
2002
Chargée de Recherche MINES ParisTech
2001
Post Doc à l’Imperial College of Science, Technology and Medicine of London
1999-2001
Post Doc au CEMEF – MINES ParisTech, Sophia Antipolis France
### Expertise Scientifique
Encadrement ####
18 thèses dont 4 en cours, 38 étudiants de mastère spécialisé Organisation de symposia et de conférences 2013
Co-organisatrice de la session « Numerical Modelling of High Speed or Innovative Metal Forming Processes » le la Conférence WCCM (World Congres in Computational Mechanics)
2006-2008 puis 2013-2016
Co–organisatrice du symposium « Heat Transfer » de la Conférence Esaform
2009-2012
Organisatrice du symposium « Heat Transfer » de la Conférence Esaform
2008
Co-organisatrice de la session « Numerical Modelling of High Speed or Innovative Metal Forming Processes » le la Conférence WCCM (World Congres in Computational Mechanics)
Sociétés savantes Corresponding Member de l’ ICFG (International Cold forging Group
Membre du Conseil Scientifique du Team Henri Fabre
depuis 2016
Membre élu du « Board of Directors » de l’association ESAFORM (European Scientific Association for Material Forming) – Trésorière de l’Association
de 2006 à 2017
Membre du Conseil Scientifique de la Conférence Esaform
Participation à des jurys ####
26 jurys de thèse ( 17 en tant que rapporteur)
2 jurys d’HDR 1 en tant que raporteur, 1 en tant que président
Publications
- 8
- 5
- 4
- 3
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
- 1
Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy AnalysisICTP 2021, Jul 2021, Online, United States. pp.493-506, ⟨10.1007/978-3-030-75381-8_41⟩
Conference papers
hal-03346703v1
|
|
Identifying heterogeneous friction coefficients on the hot forming tools in Mannesmann cross-roll piercingICTMP 2021, Nov 2021, Chennai, India
Conference papers
hal-03470683v1
|
|
1st Esaform mobility grant: Modeling of post machining distortions in thin walls applied to aluminum parts compared to experimental resultsPROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, May 2019, Vitoria-Gasteiz, Spain. pp.080015, ⟨10.1063/1.5112623⟩
Conference papers
hal-02430278v1
|
|
Analyse de la complexité du trajet de chargement lors du fluotournage de tôlesCongrès Français de Mécanique, Aug 2019, Brest, France
Conference papers
hal-02429061v1
|
|
Computational strategy for machining simulation of large aeronautical aluminum partsCOMPLAS 2019, Sep 2019, Barcelone, Espagne
Conference papers
hal-02429069v1
|
|
Numerical analysis of the complex loading path during tube flow forming processesNUMIFORM 2019, Jun 2019, Portsmouth, United States
Conference papers
hal-02429090v1
|
|
About Contact Treatment for a Velocity-Based Steady-State Formulation of Metal Forming ProblemsCOMPLAS XV 2019, Sep 2019, Barcelone, Spain
Conference papers
hal-02430287v1
|
|
Étude numérique et expérimentale du procédé de fluotournage cylindrique de tubesColloque MECAMAT, Jan 2019, Aussois, France
Conference papers
hal-02429053v1
|
|
Modelling the strength of an aluminium-steel nailed joint21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Apr 2018, Palermo, Italy. pp.Article number 050010, ⟨10.1063/1.5034883⟩
Conference papers
hal-01809358v1
|
|
New numerical approach for the modelling of machining applied to aeronautical structural parts21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Apr 2018, Palermo, Italy. pp.Article number 070022, ⟨10.1063/1.5034918⟩
Conference papers
hal-01809367v1
|
|
|
Méthode de préconditionnement multigrille hybride et parallèle pour l'accélération des calculs en mise en forme des matériaux13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Conference papers
hal-01899362v1
|
Numerical simulation of high-speed nailing process20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 110011, ⟨10.1063/1.5008138⟩
Conference papers
hal-01674405v1
|
|
|
Numerical Modeling of Friction Stir (FSW) and Linear Friction (LFW) Welding ProcessesFSWP 2017 - 5th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing, Institut de Soudure and Arts et Métiers ParisTech, Oct 2017, Metz, France
Conference papers
hal-01711993v1
|
Numerical simulation of linear friction welding of aeronautical alloys20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 110007, ⟨10.1063/1.5008134⟩
Conference papers
hal-01674392v1
|
|
Numerical methods for linear friction welding simulation of aeronautical alloysCOMPLAS 2017 - XIV International Conference on Computational Plasticity. Fundamentals and Applications, International Centre for Numerical Methods in Engineering, Sep 2017, Barcelona, Spain
Conference papers
hal-01710985v1
|
|
A Numerical Tool to Master the SPS Densification of TiAl Complex ShapesTMS 2017, Feb 2017, San Diego, CA, United States
Conference papers
hal-01708431v1
|
|
In-situ Experiments to Determine the Creep Law Describing the SPS Densification of a TiAl PowderTMS 2017, Feb 2017, San Diego, CA, United States
Conference papers
hal-01708459v1
|
|
|
Quantitative analysis of galling in cold forging of a commercial Al-Mg-Si alloyInternational Conference on the Technology of Plasticity, ICTP 2017, Sep 2017, Cambridge, United Kingdom. pp.2298 - 2303, ⟨10.1016/j.proeng.2017.10.998⟩
Conference papers
hal-01667931v1
|
Numerical modeling of electrical upsetting manufacturing processes based on Forge® environment20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 120003, ⟨10.1063/1.5008141⟩
Conference papers
hal-01674815v1
|
|
Numerical prediction of distorsions during machining of large aluminum aeronautical parts5th International Conference on Distorsion Engineering 2015, Sep 2015, Bremen, Germany. pp. 143-152
Conference papers
hal-01255190v1
|
|
|
Experimental and Numerical Analysis of Electrical Contact Crimping to Predict Mechanical Strength11th International Conference on Technology of Plasticity, ICTP 2014, Oct 2014, Nagoya, Japan. pp.2018-2023, ⟨10.1016/j.proeng.2014.10.274⟩
Conference papers
hal-01110938v1
|
Numerical Modeling of Fuel Rod Resistance Butt Welding17th International Symposium on Zirconium in the Nuclear Industry, Feb 2013, Hyderabad, Andhra Pradesh, India. pp.331-345, ⟨10.1520/STP154320120214⟩
Conference papers
hal-01163654v1
|
|
Prediction of the Distortions Caused by the Redistribution of the Residual Stresses During Machining Using FEM9th International Conference on Residual Stresses, Oct 2012, Garmisch-Partenkirchen, Germany. pp.398-405, ⟨10.4028/www.scientific.net/MSF.768-769.398⟩
Conference papers
hal-00905264v1
|
|
Optimization of the Fabrication Route of Ferritic/Martensitic ODS Cladding Tubes: Metallurgical Approach and Pilgering Numerical Modeling20th International Conference on Nuclear Engineering (ICONE20), Jul 2012, Anaheim, United States. pp.ICONE20POWER2012-54853 - Session: 2-6 Material challenges for Gen IV fast reactors and HTGR
Conference papers
hal-00679397v1
|
|
|
Finite element simulation of cold pilgering of ODS tubesJournées Annuelles de la SF2M 2012 - SF2M Annual Meeting 2012, Oct 2012, Paris, France. 2 p
Conference papers
hal-00759474v1
|
|
Laminage de tubes ODS20ème Congrès Français de Mécanique - CFM 2011, Aug 2011, Besançon, France. 6 p
Conference papers
hal-00679450v1
|
Identification of cyclic and anisotropic behaviour of ODS steels tubes11th International Conference on the Mechanical Behavior of Materials (ICM11), Jun 2011, Côme, Italy. pp.1208-1213, ⟨10.1016/j.proeng.2011.04.201⟩
Conference papers
hal-00631010v1
|
|
Numerical simulation of the cold pilgering process of ODS tubesXI International Conference on Computational Plasticity. Fundamentals and Applications, Sep 2011, Barcelona, Spain
Conference papers
hal-00675566v1
|
|
Modelling Of Residual Stresses Induced By High Speed Milling ProcessThe 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. pp.597-602 - ISBN 978-0-7354-0911-8, ⟨10.1063/1.3589580⟩
Conference papers
hal-00590239v1
|
|
Finite Element Modeling and Optimization of Mechanical Joining TechnologyThe 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. pp.247-1252 - ISBN 978-0-7354-0911-8, ⟨10.1063/1.3589687⟩
Conference papers
hal-00675006v1
|
|
|
Étude du sertissage et de la tenue mécanique de contacts électriques10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ; Clé USB
Conference papers
hal-00592919v1
|
An experimental study to determine electrical contact resistance2010 Proceedings of the 56th IEEE Holm Conference on Electrical Contacts (HOLM), Oct 2010, Charleston, United States. 5 p., ⟨10.1109/HOLM.2010.5619522⟩
Conference papers
hal-00570602v1
|
|
|
Numerical modelling of laser rapid prototyping by fusion wire deposit13th ESAFORM Conference on Material Forming, Apr 2010, Brescia, Italy. pp.Pages 1095-1098, ⟨10.1007/s12289-010-0962-2⟩
Conference papers
hal-00614026v1
|
Computational modeling of electrical contact crimping and mechanical strength analysis2010 Proceedings of the 56th IEEE Holm Conference on Electrical Contacts (HOLM), Oct 2010, Charleston, United States. 3 p., ⟨10.1109/HOLM.2010.5619564⟩
Conference papers
hal-00570599v1
|
|
|
Modélisation numérique du laminage à pas de pèlerin de tubes ODS en vu de limiter les risques d'endommagementMatériaux 2010, Oct 2010, Nantes, France. 9 p. - ISBN 978-2-9528-1403-4
Conference papers
hal-00578504v1
|
|
Finite Element Modeling of Tube Piercing and Creation of a Crack11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 355-358, ⟨10.1007/s12289-008-0068-2⟩
Conference papers
hal-00510317v1
|
|
Explicit F.E. formulation with modified linear tetrahedral elements applied to high speed forming processes11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 1411-1414, ⟨10.1007/s12289-008-0100-6⟩
Conference papers
hal-00510347v1
|
|
Modélisation de l'endommagement pour la simulation d'assemblages par déformation8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Conference papers
hal-01490642v1
|
|
Simulation des assemblages par déformation. Vers une approche intégrée de l'assemblage dans la phase de dimensionnementJournées Internationales d'Etudes ITCT 2006, Nov 2006, Paris, France. 8 p
Conference papers
hal-00582326v1
|
|
A node-nested Galerkin multigrid method for metal forging simulationEMG 2005 - Multigrid, Multilevel and Multiscale Methods, Sep 2005, Delft, Netherlands. 10 p. - ISBN 90-9020969-7
Conference papers
hal-00581743v1
|
Modelling of tools heating in hot forging processesEighth International Conference on Advanced Computational Methods in Heat Transfer, Mar 2004, Lisbonne, Portugal. p. 119-128
Conference papers
hal-00531186v1
|
|
Three dimensional finite element simulation of ring rolling7th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2001), Jun 2001, Toyohashi, Japan. p.595-600 - ISBN 90-2651-822-6
Conference papers
hal-00536354v1
|
|
An efficient multigrid solver for incompressible fluid problems: Application to the 3D hot forging process6th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 98), Jun 1998, Enschede, Netherlands. pp.233-238
Conference papers
hal-00573679v1
|
|
Linear Friction Welding of Aeronautical alloys Modeling and Numerical Simulation4th International Linear Friction Welding Symposium, Mar 2017, Cambridge, United Kingdom
Conference poster
hal-01712005v1
|
Modelling the strength of self-piercing riveted jointsAndreas Chrysanthou and Xin Sun. Self-Piercing Riveting, Properties, Processes and Applications, Woodhead Publishing, pp.79-107, 2013, Woodhead Publishing Series in Welding and Other Joining Technologies, eBook ISBN 9780857098849 - Print Book ISBN 9781845695354. ⟨10.1533/9780857098849.1.79⟩
Book sections
hal-01052922v1
|
|
Contribution à la simulation numérique tridimensionnelle du forgeage à chaud : étude du contact et calcul multigrilleMécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 1999. Français. ⟨NNT : ⟩
Theses
tel-00480385v1
|
|
Stratégies numériques pour la modélisation des procédés de fabricationMatériaux. Université de Valenciennes et du Hainaut-Cambresis; Ecole Nationale Supérieure des Mines de Paris, 2011
Habilitation à diriger des recherches
tel-00931202v1
|