Lamine HATTALI

Identifiants chercheurs

IdHAL :

lamine-hattali

ORCID :

0000-0002-8298-9160

IdRef :

137485794

Présentation

Holding a Ph.D degree in Materials sciences from Ecole Centrale de Lyon, France. Lamine Hattali is an assistant professor at the Université Paris-Saclay. He heads the Materials Science and Engineering teaching team at IUT Cachan. He teaches Materials Science, including courses on Phase Diagrams, Elasticity, plasticity, material and process selection in mechanical design. His fields of active research are the mechanical behaviour of deposited film, Fracture Mechanics and Lattice structure..

Publications

Article dans une revue (22)

Analytical and Numerical Analysis of Solid Cylinder Made of Radially Nonuniform Material Under Extension Chahinez Medjane,Abdelhakim Benslimane,Nadir Mesrati,Lamine Hattali Composites: Mechanics, Computations, Applications: An International Journal, 2024, 15 (2), pp.85-102. ⟨10.1615/CompMechComputApplIntJ.2023048398⟩ Article dans une revue hal-05262971v1
From the development of low-cost filament to 3D printing ceramic parts obtained by fused filament fabrication Anton Smirnov,Svetlana Terekhina,Tatiana Tarasova,Lamine Hattali,Sergey Grigoriev International Journal of Advanced Manufacturing Technology, 2023, 128 (1-2), pp.511-529. ⟨10.1007/s00170-023-11849-5⟩ Article dans une revue hal-04208304v1
Assessment of non-uniform residual stress field of the thermal sprayed stainless steel coatings on aluminium substrates by the integral hole drilling method Harouche Mohamed Karim,Hattali Lamine,Mesrati Nadir Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022, 236 (21), pp.10701-10712. ⟨10.1177/0954406220917712⟩ Article dans une revue hal-03896956v1
Design of experiment analysis on tensile properties of PLA samples produced by fused filament fabrication Lionel Auffray,Pierre-André Gouge,Lamine Hattali International Journal of Advanced Manufacturing Technology, 2022, 118 (11-12), pp.4123-4137. ⟨10.1007/s00170-021-08216-7⟩ Article dans une revue hal-03891392v1
Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymers Svetlana Terekhina,Tatiana Tarasova,Sergey Egorov,Innokentiy Skornyakov,Laurent Guillaumatet al. International Journal of Advanced Manufacturing Technology, 2021, 117 (7-8), pp.2041-2048. ⟨10.1007/s00170-021-07223-y⟩ Article dans une revue hal-03470957v1
In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process Svetlana Terekhina,Sergey Egorov,Tatiana Tarasova,Innokentiy Skornyakov,Laurent Guillaumatet al. Composites Part A: Applied Science and Manufacturing, 2021, ⟨10.1016/j.compositesa.2021.106725⟩ Article dans une revue hal-03471088v1
The effect of build orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer Svetlana Terekhina,Tatiana Tarasova,Sergey Egorov,Innokentiy Skornyakov,Laurent Guillaumatet al. International Journal of Fatigue, 2020, 140, pp.105825. ⟨10.1016/j.ijfatigue.2020.105825⟩ Article dans une revue hal-03471157v1
Interfacial fracture toughness measurement in both steady state and transient regimes using four-point bending test M. Zebar,M. Hattali,N. Mesrati International Journal of Fracture, 2020, 222 (1-2), pp.123-135. ⟨10.1007/s10704-020-00437-3⟩ Article dans une revue hal-03896924v1
On the difference in material structure and fatigue properties of polyamide specimens produced by fused filament fabrication and selective laser sintering Svetlana Terekhina,Tatiana Tarasova,Sergey Egorov,Laurent Guillaumat,Lamine Hattali International Journal of Advanced Manufacturing Technology, 2020, 111, pp.93-107. ⟨10.1007/s00170-020-06026-x⟩ Article dans une revue hal-03470886v1
How heat controls fracture: the thermodynamics of creeping and avalanching cracks Tom Vincent-Dospital,Renaud Toussaint,Stéphane Santucci,Loïc Vanel,Daniel Bonamyet al. Soft Matter, 2020, 16 (41), pp.9590-9602. ⟨10.1039/D0SM01062F⟩ Article dans une revue hal-02926644v1
Aftershock sequences and seismic-like organization of acoustic events produced by a single propagating crack Jonathan Barés,Alizée Dubois,Lamine Hattali,Davy Dalmas,Daniel Bonamy Nature Communications, 2018, 9, pp.1253. ⟨10.1038/s41467-018-03559-4⟩ Article dans une revue hal-01756904v1
Characterization of surface topography of 3D printed parts by multi-scale analysis Yann Quinsat,Claire Lartigue,Christopher Brown,Lamine Hattali International Journal on Interactive Design and Manufacturing, 2017, ⟨10.1007/s12008-017-0433-9⟩ Article dans une revue hal-01650220v1
Characterization and Modeling of the Mechanical Behavior of Aeronautical Alloy Based Composite A. Sadki,M.L. Hattali,M. Bradai,R. Younes,N. Mesrati Universal Journal of Chemistry, 2016, 4 (1), pp.10-19. ⟨10.13189/ujc.2016.040102⟩ Article dans une revue hal-04009400v1
Microstructure and interfacial strength of stainless steel coatings obtained by thermal spray process Lamine Hattali,Abdellah Sadki,Rassim Younes,Mohand Amokrane Bradai,N. Mesrati Annales de Chimie - Science des Matériaux, 2016, ⟨10.3166/acsm.40.131-142⟩ Article dans une revue hal-04443166v1
Effect of nanosilica additive particles on both friction and wear performance of mild steel/CuSn/SnBi multimaterial system H. Ait-Sadi,L. Hemmouche,L. Hattali,M. Britah,Alain Iostet al. Tribology International, 2015, 90, pp.372-385. ⟨10.1016/j.triboint.2015.04.034⟩ Article dans une revue hal-01169344v2
Fluctuations of Global Energy Release and Crackling in Nominally Brittle Heterogeneous Fracture Jonathan Barés,Lamine Hattali,Davy Dalmas,Daniel Bonamy Physical Review Letters, 2014, 113, pp.264301. ⟨10.1103/PhysRevLett.113.264301⟩ Article dans une revue cea-01086096v1
LOW VELOCITY SURFACE FRACTURE PATTERNS IN BRITTLE MATERIAL: A NEWLY EVIDENCED MECHANICAL INSTABILITY Lamine Hattali,Jonathan Barés,Laurent Ponson,Daniel Bonamy Materials Science Forum, 2012, 706-709, pp.920-924. ⟨10.4028/www.scientific.net/MSF.706-709.920⟩ Article dans une revue hal-00658231v1
Electric charge trapping, residual stresses and properties of ceramics after metal/ceramics bonding Lamine Hattali,Nadir Mesrati,Daniel Tréheux Journal of the European Ceramic Society, 2012, 32, pp.717-725 Article dans une revue hal-00657384v1
Calculation and experimental determinations of the residual stress distribution in alumina/Ni/alumina and alumina/Ni/nickel alloy systems Lamine Hattali,Stéphane Valette,Francois Ropital,Nadir Mesrati,Daniel Tréheux Journal of Materials Science, 2010, 45, pp.4133-4140. ⟨10.1007/s10853-010-4502-8⟩ Article dans une revue istex hal-00658195v1
FEM CALCULATIONS AND EXPERIMENTAL DETERMINATION OF RESIDUAL STRESSES IN ALUMINA/NICKEL ALLOY JOINTS. OPTIMIZATION OF FABRICATION PARAMETERS Lamine Hattali,Stéphane Valette,Francois Ropital,Nadir Mesrati,Daniel Tréheux Advanced Materials Research, 2010, 89-91, pp.238-243. ⟨10.4028/www.scientific.net/AMR.89-91.238⟩ Article dans une revue hal-00658250v1
Effect of thermal residual stresses on the strength for both alumina/Ni/alumina and alumina/Ni/nickel alloy bimaterials Lamine Hattali,Stéphane Valette,Francois Ropital,Nadir Mesrati,Daniel Tréheux Journal of Materials Science, 2009, 44, pp.3198-3210. ⟨10.1007/s10853-009-3426-7⟩ Article dans une revue istex hal-00658202v1
Study of SiC-nickel alloy bonding for high temperature applications Lamine Hattali,Stéphane Valette,Francois Ropital,Guy Stremsdoerfer,Nadir Mesratiet al. Journal of the European Ceramic Society, 2009, 29, pp.813-819. ⟨10.1016/j.jeurceramsoc.2008.06.035⟩ Article dans une revue hal-00657486v1

Communication dans un congrès (5)

Développement et évaluation fonctionnelle d’un convertisseur électronique de puissance sur substrat PLA Camille Herlent,Guillaume Hérault,Nouh Zeggai,Hattali, M L,Morgan Almanzaet al. Journée technique - Le Packaging Electronique Durable, IEEE-EPS France, Dec 2024, Grenoble, France Communication dans un congrès hal-04830163v1
Influence Of Parameters On Mechanical Properties Of Thermoplastic Polymers Obtained By Fused Filament Fabrication (FFF) Svetlana Terekhina,Lamine Hattali,Laurent Guillaumat ICCM21, Aug 2017, Xi'an, China Communication dans un congrès hal-03473135v1
Multi-scale surface characterization in additive manufacturing using CT Yann Quinsat,Claire Lartigue,Christopher Brown,Lamine Hattali International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), Sep 2016, Catane, Italy. ⟨10.1007/978-3-319-45781-9_28⟩ Communication dans un congrès hal-01358916v1
Détermination des facteurs d'intensité des contraintes et du T-stress par corrélation d'image et par éléments finis dans une expérience de wedge-splitting Lamine Hattali,Harold Auradou,M.L.M. François,Veronique Lazarus CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03439704v1
Comparaison du comportement tribologique de deux revêtements antifriction pour coussinets conventionnels H. Ait Sadi,M. Britah,L. Hattali,K. Necib,Alain Iostet al. Journées internationales francophones de tribologie (25;2013; Lyon), Jul 2015, Lyon, France. pp.68-69 Communication dans un congrès hal-01383535v1

Thèse (1)

CARACTÉRISATION ET MODÉLISATION THERMO-MÉCANIQUES DES ASSEMBLAGES MÉTAL-CÉRAMIQUE ÉLABORÉS PAR THERMOCOMPRESSION Lamine Hattali Mécanique [physics.med-ph]. Ecole Centrale de Lyon, 2009. Français. ⟨NNT : ⟩ Thèse tel-00505340v1