Lucien Laiarinandrasana

Identifiants chercheurs

IdHAL :

lucien-laiarinandrasana

ORCID :

0000-0001-8751-3703

IdRef :

057431213

Présentation

Formation

HDR soutenue en Décembre 2005, Université François Rabelais, Tours

Thèse de doctorat soutenue en Novembre 1994, Ecole Nationale Supérieure des Mines

de Paris, Paris - Commissariat à l’Energie Atomique, Saclay

DEA “Mécanique et Matériaux”, 1991 Université Paris XIII, Villetaneuse

Diplôme d’ingénieur: Génie Maritime, 1989-1991, Ecole Nationale Supérieure de Techniques Avancées, Paris

Diplôme d’ingénieur: Sciences et Technique, 1982-1984 Ecole Navale, Brest

Thèmes de recherche

Comportement, endommagement et rupture de matériaux polymères et composites à matrice organique

Expérimentation multi-échelle par analyse 3D (Tomographie/Laminographie in-situ): relation entre microstructure et propriétés mécaniques

Observations des micro-mécanismes de déformation, d'endommagement et de rupture

Développement de modèles constitutifs (lois de comportement en multiaxial) dédiés à la simulation numérique

Etudes de critères d’amorçage et de propagation de fissure sous chargements monotone ou cyclique

Prédiction de la durée de vie d’une structure industrielle à la conception ou en service (durée de vie résiduelle)

Enseignements

Direction de thèse en Sciences et Génie des Matériaux

Master M2 Materials and Engineering Sciences in Paris (MAGIS): Durabilité des Polymères

Mastère spécialisé Design des Matériaux et des Structures (DMS): Prédiction des durées de vie

Cycle ingénieurs: Mines Paris, EPF Ecole d'ingénieurs, Ecole Supérieure de la Chimie Organique et Minérale (ESCOM)

Formation continue

Stage CACEMI MC11: Introduction aux essais de fatigue Stage CACEMI MC04: Endommagements et mécanismes de rupture des matériaux industriels

Autres activités académiques

Responsable du pôle de recherche Mécanique Expérimentale et Matériaux (MEM)

Membre de l’International Advisory Board of the International Conference on Deformation, Yield and Fracture of Polymers (DYFP) Kerkrade, Hollande

Membre du Conseil Scientifique du pôle de compétitivité POLYMERIS

Membre du TC4 de l’European Structural Integrity Society (ESIS): Fracture of Polymers

Membre du CA de l'association MECAMAT

Publications

Article dans une revue (76)

Structure and crystallization kinetics of PVDF/organoclay nanocomposites processed by twin-screw extrusion and electrical contact poling Nelly Pons,Bafétégué Ouattara,Séverine A.E. Boyer,Alain Burr,Lucien Laiarinandrasanaet al. Materials Today Communications, 2026, 50, pp.114535. ⟨10.1016/j.mtcomm.2025.114535⟩ Article dans une revue hal-05444205v1
Image generation of short glass fibre composite microstructures: From control to optimisation and damage prediction Guilherme Della Mea,Petr Dokládal,Etienne Decencière,Lucien Laiarinandrasana,Cristian Ovalle Computer Methods in Applied Mechanics and Engineering, 2026, 451, pp.118686. ⟨10.1016/j.cma.2025.118686⟩ Article dans une revue hal-05441451v1
Microstructural damage on thermoplastic hybrid composite in fatigue: Qualitative correlation with a creep strain rate fatigue criterion S. Gillet,N. Bedrici,S. Joannès,A. King,F. Lamminget al. International Journal of Fatigue, 2026, 208, pp.109567. ⟨10.1016/j.ijfatigue.2026.109567⟩ Article dans une revue hal-05539787v1
Local measurement on oedometric compression tests: Time and temperature ageing effects on a fluorosilicone Clémence Logeais,Cristian Ovalle,Lucien Laiarinandrasana Mechanics of Materials, 2025, 200, pp.105193. ⟨10.1016/j.mechmat.2024.105193⟩ Article dans une revue hal-04943295v1
A homogenization technique for materials with periodic lacunar fractal microstructure Rawad Wakim,Quentin Javey,Christian Gentil,Cristian Ovalle Rodas,Lucien Laiarinandrasanaet al. Comptes Rendus. Mécanique, 2025, 353 (G1), pp.1185-1200. ⟨10.5802/crmeca.330⟩ Article dans une revue hal-05443780v1
Effect of fibre concentration on the mechanical properties of welded reinforced polypropylene E. Mofakhami,L. Gervat,B. Fayolle,G. Miquelard-Garnier,Cristian Ovalleet al. Composites Part B: Engineering, 2024, 269, pp.111111. ⟨10.1016/j.compositesb.2023.111111⟩ Article dans une revue hal-04420214v1
Mechanisms of void nucleation on neat and Glass Syntactic PolyPropylene using in situ synchrotron radiation tomography Theophile Hourdou,Cristian Ovalle,Sebastien Blassiau,Alain Thionnet,Lucien Laiarinandrasana Composites Part B: Engineering, 2024, 284, ⟨10.1016/j.compositesb.2024.111696⟩ Article dans une revue hal-04943282v1
Deformation and cavitation at the spherulite scale of an isotactic polypropylene Lucien Laiarinandrasana,Olga Klinkova,Cristian Ovalle,Peter Cloetens,Henry Proudhonet al. Journal of Theoretical, Computational and Applied Mechanics, 2024, ⟨10.46298/jtcam.11335⟩ Article dans une revue hal-04100630v3
Physics informed self-supervised segmentation of elastic composite materials Guilherme Basso Della Mea,Cristian Ovalle,Lucien Laiarinandrasana,Etienne Decencière,Petr Dokládal Computer Methods in Applied Mechanics and Engineering, 2024, 432, pp.117355. ⟨10.1016/j.cma.2024.117355⟩ Article dans une revue hal-04707183v1
Stress amplification and relaxation imaging around cracks in nanocomposite gels using ultrasound elastography H. Le Blay,T. Deffieux,Lucien Laiarinandrasana,M. Tanter,A. Marcellan Soft Matter, 2024, 20 (46), pp.9127-9139. ⟨10.1039/D4SM00909F⟩ Article dans une revue hal-04944053v1
Plane–strain condition in plane–strain grooved tensile (PSGT) specimens during traction and creep loading at room and high temperature Cristian Ovalle,M. Broudin,L. Laiarinandrasana Strain, 2023, ⟨10.1111/str.12467⟩ Article dans une revue hal-04420186v1
Dependence on strain rate of the glass and ductile-to-brittle transition temperatures of an ultra-high molecular weight polyethylene used at cryogenic temperature Nathan Odou,James Hermary,Cristian Ovalle,Lucien Laiarinandrasana Continuum Mechanics and Thermodynamics, 2023, ⟨10.1007/s00161-023-01261-5⟩ Article dans une revue hal-04420174v1
Thermal Degradation of Fluorosilicone Elastomers Emmanuel Richaud,Leticia Pires,Sébastien Roland,Laurianne Truffault,Lucien Laiarinandrasanaet al. Macromolecular Symposia, 2022, 405 (1), pp.2100220. ⟨10.1002/masy.202100220⟩ Article dans une revue hal-03825121v2
Short-term creep and low cycle fatigue unified criterion for a hybridised composite material Stéphane Gillet,Thomas Jacopin,Sébastien Joannès,Nacera Bedrici,Lucien Laiarinandrasana International Journal of Fatigue, 2022, 155, pp.106571. ⟨10.1016/j.ijfatigue.2021.106571⟩ Article dans une revue hal-03462858v1
Ductile crack initiation and growth on a plasticized Polyvinylchloride during air bag deployment Lucien Laiarinandrasana,Clément Bertaux,Nicolas Amouroux,Cristian Ovalle Rodas Journal of Theoretical, Computational and Applied Mechanics, 2021, 2021, pp.1-18. ⟨10.46298/jtcam.7401⟩ Article dans une revue hal-03206110v2
Nanocavitation mechanisms in deformed High Density PolyEthylene (HDPE) using synchrotron radiation NanoTomography Cristian Ovalle,Peter Cloetens,Henry Proudhon,Thilo F. Morgeneyer,Lucien Laiarinandrasana Polymer, 2021, 229, pp.123959. ⟨10.1016/j.polymer.2021.123959⟩ Article dans une revue hal-03288721v1
Impact speed dependency of the ductile failure threshold temperature for a plasticized polyvinylchloride Clément Bertaux,Nicolas Amouroux,C. Ovalle Ovalle Rodas,Lucien Laiarinandrasana Continuum Mechanics and Thermodynamics, 2021, 33 (6), pp.2375-2390. ⟨10.1007/s00161-021-01026-y⟩ Article dans une revue hal-03359093v1
Elastic Properties of Polychloroprene Rubbers in Tension and Compression during Ageing Rami Bouaziz,Laurianne Truffault,Rouslan Borisov,Cristian Ovalle,Lucien Laiarinandrasanaet al. Polymers, 2020, 12 (10), pp.2354. ⟨10.3390/polym12102354⟩ Article dans une revue hal-02980985v1
Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading Lucien Laiarinandrasana,Thilo F. Morgeneyer,Y. Cheng,L. Helfen,V. Le Sauxet al. Continuum Mechanics and Thermodynamics, 2020, 32, pp.451-469. ⟨10.1007/s00161-019-00748-4⟩ Article dans une revue hal-02052685v1
Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness Sébastien Joannès,Faisal Islam,Lucien Laiarinandrasana Applied Composite Materials, 2020, 27 (3), pp.165-184. ⟨10.1007/s10443-020-09803-9⟩ Article dans une revue hal-03110082v1
Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup Faisal Islam,Sébastien Joannès,Steve Bucknell,Yann Leray,Anthony R. Bunsellet al. Journal of Reinforced Plastics and Composites, 2020, 39 (3-4), pp.144 - 162. ⟨10.1177/0731684419873712⟩ Article dans une revue hal-02321387v1
Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites Ashok Rajpurohit,Sébastien Joannès,Vicky Singery,Philippe Sanial,Lucien Laiarinandrasana Journal of Composites Science, 2020, 4 (1), pp.6. ⟨10.3390/jcs4010006⟩ Article dans une revue hal-02469579v1
Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading C. Ovalle,G. Boisot,Lucien Laiarinandrasana Mechanics of Materials, 2020, 145, pp.103375. ⟨10.1016/j.mechmat.2020.103375⟩ Article dans une revue hal-03189505v1
Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study Eeva Mofakhami,Sylvie Tencé-Girault,Jonathan Perrin,Mario Scheel,Laurent Gervatet al. Polymer Testing, 2020, 85, pp.1-12. ⟨10.1016/j.polymertesting.2020.106454⟩ Article dans une revue hal-02532971v1
Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience Francesco Baldi,Silvia Agnelli,Luca Andena,Bamber Blackman,Leonardo Castellaniet al. Materials Performance and Characterization, 2020, 9 (5), pp.20190175. ⟨10.1520/MPC20190175⟩ Article dans une revue hal-03207111v1
Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques Jan Rojek,Christian Breite,Yentl Swolfs,Lucien Laiarinandrasana Continuum Mechanics and Thermodynamics, 2020, 32 (2), pp.471-488. ⟨10.1007/s00161-020-00865-5⟩ Article dans une revue hal-03189508v1
Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres Faisal Islam,Sébastien Joannès,Lucien Laiarinandrasana Journal of Composites Science, 2019, 3 (3), pp.69. ⟨10.3390/jcs3030069⟩ Article dans une revue hal-02321373v1
In Situ tensile tests to analyze the mechanical response, crack initiation, and crack propagation in single polyamide 66 fibers Alba Marcellan,Anthony Bunsell,Roland Piques,Lucien Laiarinandrasana Journal of Polymer Science Part B: Polymer Physics, 2019, 57 (11), pp.680-690. ⟨10.1002/polb.24823⟩ Article dans une revue hal-02486413v1
Stress Heterogeneity Leading to Void Nucleation within Spherulites for Semi-Crystalline Polymers Lucien Laiarinandrasana Crystals, 2019, 9 (6), pp.298. ⟨10.3390/cryst9060298⟩ Article dans une revue hal-03189519v1
Development of a Versatile Mechanical Testing Device for In Situ Synchrotron Tomography and Diffraction Experiments Maxime Pelerin,Andrew King,Lucien Laiarinandrasana,Henry Proudhon Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.378-387. ⟨10.1007/s40192-019-00143-6⟩ Article dans une revue hal-02355866v1
Anisotropic (Continuum Damage Mechanics)-based multi-mechanism model for semi-crystalline polymer Walid Ayadi,Lucien Laiarinandrasana,Kacem Sai International Journal of Damage Mechanics, 2018, 27 (3), pp.357-386. ⟨10.1177/1056789516679494⟩ Article dans une revue hal-01759183v1
Study of the plastic deformation behaviour of ductile polymers: Use of the material key curves S. Agnelli,F. Baldi,L. Castellani,K. Pisoni,M. Vighiet al. Mechanics of Materials, 2018, 117, pp.105-115. ⟨10.1016/j.mechmat.2017.11.002⟩ Article dans une revue hal-01677854v1
Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality : experimental characterisation and finite element modelling Nathan Selles,Andrew King,Henry Proudhon,Nicolas Saintier,Lucien Laiarinandrasana Mechanics of Time-Dependent Materials, 2018, 22 (3), pp.351-371. ⟨10.1007/s11043-017-9360-1⟩ Article dans une revue hal-01874758v1
Finite element modelling of woven composite failure modes at the mesoscopic scale : deterministic versus stochastic approaches Quentin Roirand,Djamel Missoum-Benziane,Alain Thionnet,Lucien Laiarinandrasana Continuum Mechanics and Thermodynamics, 2017, 29 (5), pp.1081-1092. ⟨10.1007/s00161-017-0553-2⟩ Article dans une revue hal-01610235v1
Voiding mechanisms in deformed polyamide 6 observed at the nanometric scale Nathan Selles,Peter Cloetens,Henry Proudhon,Thilo F. Morgeneyer,Olga Klinkovaet al. Macromolecules, 2017, 50 (11), pp.4372-4383. ⟨10.1021/acs.macromol.7b00727⟩ Article dans une revue hal-01549074v1
Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation Pierre-Alexis Poulet,Gilles Hochstetter,Andrew King,Henry Proudhon,Sébastien Joannèset al. Polymer Testing, 2016, 56, pp.245-260. ⟨10.1016/j.polymertesting.2016.10.023⟩ Article dans une revue istex hal-01421561v1
Modelling of failure of woven composites. Part 1 : Nomenclature defining the interzone concept Alain Thionnet,Wassim Trabelsi,Quentin Roirand,Anthony R. Bunsell,Lucien Laiarinandrasana Applied Composite Materials, 2016, 23 (4), pp.659-679. ⟨10.1007/s10443-016-9479-2⟩ Article dans une revue hal-01357875v1
Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests Nathan Selles,Franck N'Guyen,Thilo F. Morgeneyer,Henry Proudhon,Wolfgang Ludwiget al. Polymer Testing, 2016, 49, pp.137-146. ⟨10.1016/j.polymertesting.2015.11.019⟩ Article dans une revue hal-01269595v1
Three dimensional quantification of anisotropic void evolution in deformed semi-crystalline polyamide 6 Lucien Laiarinandrasana,Olga Klinkova,Franck N'Guyen,Henry Proudhon,Thilo F. Morgeneyeret al. International Journal of Plasticity, 2016, 83, pp.19-36. ⟨10.1016/j.ijplas.2016.04.001⟩ Article dans une revue istex hal-01357865v1
3D damage micromechanisms in polyamide 6 ahead of a severe notch studied by in situ synchrotron laminography Yin Cheng,Lucien Laiarinandrasana,Lukas Helfen,Henry Proudhon,Olga Klinkovaet al. Macromolecular Chemistry and Physics, 2016, 217, pp.701-715. ⟨10.1002/macp.201500316⟩ Article dans une revue hal-01402600v1
Modelling of failure of woven composites. Part 2 : Experimental and numerical justification of the interzone concept Lucien Laiarinandrasana,Wassim Trabelsi,Quentin Roirand,Anthony R. Bunsell,Alain Thionnet Applied Composite Materials, 2016, 23 (4), pp.681-705. ⟨10.1007/s10443-016-9480-9⟩ Article dans une revue hal-01357881v1
Voiding mechanisms in semi-crystalline polyamide 6 during creep tests assessed by damage based constitutive relationships and finite elements calculations Nathan Selles,Nicolas Saintier,Lucien Laiarinandrasana International Journal of Plasticity, 2016, 86, pp.112-127. ⟨10.1016/j.ijplas.2016.08.004⟩ Article dans une revue istex hal-01421403v1
Structural versus microstructural evolution of semi-crystalline polymers during necking under tension: Influence of the skin-core effects, the relative humidity and the strain rate Lucien Laiarinandrasana,Nathan Selles,Olga Klinkova,Thilo F. Morgeneyer,Henry Proudhonet al. Polymer Testing, 2016, 55, pp.297-309. ⟨10.1016/j.polymertesting.2016.09.012⟩ Article dans une revue istex hal-01717685v1
Comparative study of continuum damage mechanics and Mechanics of Porous Media based on multi-mechanism model on Polyamide 6 semi-crystalline polymer M. Jeridi,Lucien Laiarinandrasana,Kacem Sai International Journal of Solids and Structures, 2015, 53, pp.12-27. ⟨10.1016/j.ijsolstr.2014.10.031⟩ Article dans une revue hal-01101447v1
Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise S. Agnelli,F. Baldi,B.R.K. Blackman,L. Castellani,P.M. Frontiniet al. Polymer Testing, 2015, 44, pp.72-81. ⟨10.1016/j.polymertesting.2015.03.019⟩ Article dans une revue hal-01165294v1
Damage based model to study the effect of notch introduction technique on the J-integral value of PolyOxyMethylene Lucien Laiarinandrasana,Jonathan Ricard,Fabrice Guigné,Yin Cheng,Thilo F. Morgeneyeret al. Engineering Fracture Mechanics, 2015, 149, pp.214-229. ⟨10.1016/j.engfracmech.2015.08.031⟩ Article dans une revue istex hal-01272301v1
Nanovoid morphology and distribution in deformed HDPE studied by magnified synchrotron radiation holotomography Thilo F. Morgeneyer,Henry Proudhon,Peter Cloetens,Wolfgang Ludwig,Quentin Roirandet al. Polymer, 2014, 55, pp.6439-6443. ⟨10.1016/j.polymer.2014.10.022⟩ Article dans une revue istex hal-01102339v1
Damage and fracture mechanisms of polyoxymethylene : multiscale experimental study and finite element modeling Jonathan Ricard,Fabrice Guigné,Lucien Laiarinandrasana Engineering Fracture Mechanics, 2014, 115, pp.270-283. ⟨10.1016/j.engfracmech.2013.11.011⟩ Article dans une revue istex hal-00942920v1
Experimental investigation and modelling of compressibility induced by damage in carbon black-reinforced natural rubber Sabine Cantournet,Khaled Layouni,Lucien Laiarinandrasana,Roland Piques Comptes Rendus. Mécanique, 2014, 342, pp.299-310. ⟨10.1016/j.crme.2014.02.005⟩ Article dans une revue istex hal-00148574v1
Experimental study of the crack depth ratio threshold to analyze the slow crack growth by creep of high density polyethylene pipes Lucien Laiarinandrasana,Clémence Devilliers,Jean Marc Lucatelli,Emmanuelle Gaudichet-Maurin,Jean Michel Brossard International Journal of Pressure Vessels and Piping, 2014, 122, pp.22-30. ⟨10.1016/j.ijpvp.2014.07.002⟩ Article dans une revue istex hal-01078760v1
On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers Lucien Laiarinandrasana,Francesco Baldi,Silvia Agnelli,Theonis Riccò Polymer Testing, 2013, 32 (8), pp.1326-1333. ⟨10.1016/j.polymertesting.2013.08.007⟩ Article dans une revue istex hal-03359095v1
Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model Henri-Alexandre Cayzac,Kacem Sai,Lucien Laiarinandrasana International Journal of Plasticity, 2013, 51, pp.47-64. ⟨10.1016/j.ijplas.2013.06.008⟩ Article dans une revue istex hal-00905508v1
Fracture behavior of amorphous and semicrystalline blends of poly(vinylidene fluoride) and poly(methyl methacrylate) Lucien Laiarinandrasana,Yannick Nziakou,Jean Louis Halary Journal of Polymer Science Part B: Polymer Physics, 2012, Deformation, Yield and Fracture of Polymers, 50 (24), pp.1740-1747. ⟨10.1002/polb.23188⟩ Article dans une revue istex hal-03359089v1
Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE Benoît Piezel,B.C.N. Mercatoris,Wassim Trabelsi,Lucien Laiarinandrasana,Alain Thionnetet al. Composite Structures, 2012, 94, pp.2343-2357. ⟨10.1016/j.compstruct.2012.03.015⟩ Article dans une revue istex hal-00700994v1
Modelling the effects of various contents of fillers on the relaxation rate of elastomers Lucien Laiarinandrasana,Aurélie Jean,Dominique Jeulin,Samuel Forest Materials & Design, 2012, 33, pp.75-82. ⟨10.1016/j.matdes.2011.06.054⟩ Article dans une revue istex hal-00624105v1
Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by x-ray tomography Lucien Laiarinandrasana,Thilo F. Morgeneyer,Henry Proudhon,Franck N'Guyen,Éric Maire Macromolecules, 2012, 45, pp.4658-4668. ⟨10.1021/ma3005247⟩ Article dans une revue hal-00725911v1
Combining X‐ray Microtomography with Full Field Finite Elements Method to Study 3D Cracking in Structural Materials Henry Proudhon,Jia Li,Vincent Chiaruttini,Thilo F. Morgeneyer,Lucien Laiarinandrasanaet al. JOM Journal of the Minerals, Metals and Materials Society, 2012 Article dans une revue hal-01668797v1
Toughness improvement of epoxy networks by nanophase-separating antiplasticizers Lucien Laiarinandrasana,Y. Fu,Jean Louis Halary Journal of Applied Polymer Science, 2012, 123, pp.3437-3447. ⟨10.1002/app.34646⟩ Article dans une revue istex hal-00675986v1
Multi-scale modelling of heterogeneous shell structures T.J. Massart,B.C.N. Mercatoris,Benoît Piezel,P. Berke,Lucien Laiarinandrasanaet al. Computer Assisted Mechanics and Engineering Sciences, 2011, 18, pp.53-71 Article dans une revue hal-00714256v1
Ring tests on high density polyethylene : full investigation assisted by finite element modeling Lucien Laiarinandrasana,Clémence Devilliers,S. Oberti,E. Gaudichet-Maurin,B. Fayolleet al. International Journal of Pressure Vessels and Piping, 2011, 88 (1), pp.1-10. ⟨10.1016/j.ijpvp.2010.12.002⟩ Article dans une revue hal-00565851v1
Experimental investigations and modeling of volume change induced by void growth in polyamide 11 Guillaume Boisot,Lucien Laiarinandrasana,Jacques Besson,C. Fond,Gilles Hochstetter International Journal of Solids and Structures, 2011, 48 (19), pp.2642-2654. ⟨10.1016/j.ijsolstr.2011.05.016⟩ Article dans une revue istex hal-00624022v1
Effects of aging on the creep behaviour and residual lifetime assessment of polyvinyl chloride (PVC) pipes Lucien Laiarinandrasana,E. Gaudichet,S. Oberti,Clémence Devilliers International Journal of Pressure Vessels and Piping, 2011, 88, pp.99-108. ⟨10.1016/j.ijpvp.2011.01.002⟩ Article dans une revue istex hal-00595870v1
Interactions chimiques des tubes en polyéthylène avec le chlore en eau potable E. Gaudichet-Maurin,Clémence Devilliers,P. Fernandes,S. Oberti,J.M. Lucatelliet al. TSM. Techniques Sciences Méthodes – Génie urbain, génie rural, 2011, 9 (Septembre), pp.28-38 Article dans une revue hal-00659435v1
Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6 Kacem Sai,Lucien Laiarinandrasana,I. Ben Naceur,Jacques Besson,M. Jeridiet al. Materials Science and Engineering: A, 2011, 528, pp.1087-1093. ⟨10.1016/j.msea.2010.09.071⟩ Article dans une revue istex hal-00553177v1
Damage of semicrystalline polyamide 6 assessed by 3D X-ray tomography: From microstructural evolution to constitutive modeling Lucien Laiarinandrasana,Thilo F. Morgeneyer,Henry Proudhon,Cédric Regrain Journal of Polymer Science Part B: Polymer Physics, 2010, 48 (13), pp.1516-1525. ⟨10.1002/polb.22043⟩ Article dans une revue hal-00509794v1
Accounting for porosity, time and temperature dependency in fracture mechanics concepts on polyvinylidene fluoride material Lucien Laiarinandrasana,Mélanie Lafarge,Gilles Hochstetter Engineering Fracture Mechanics, 2009, 76, pp.2766-2779. ⟨10.1016/j.engfracmech.2009.06.003⟩ Article dans une revue istex hal-00438800v1
A local approach to creep fracture by slow crack growth in an MDPE : damage modelling Hedi Ben Hadj Hamouda,Lucien Laiarinandrasana,Roland Piques International Journal of Pressure Vessels and Piping, 2009, 86, pp.228-238. ⟨10.1016/j.ijpvp.2008.09.002⟩ Article dans une revue istex hal-00367963v1
Experimental and numerical study of creep and creep rupture behavior of PA6 Cédric Regrain,Lucien Laiarinandrasana,Sophie Toillon Engineering Fracture Mechanics, 2009, 76, pp.2656-2665. ⟨10.1016/j.engfracmech.2009.04.016⟩ Article dans une revue istex hal-00438802v1
Temperature dependent mechanical behaviour of PVDF: Experiments and numerical modelling Lucien Laiarinandrasana,Jacques Besson,Mélanie Lafarge,Gilles Hochstetter International Journal of Plasticity, 2009, 25, pp.1301-1324. ⟨10.1016/j.ijplas.2008.09.008⟩ Article dans une revue istex hal-00390741v1
Multi-mechanism models for semi-crystalline polymer: Constitutive relations and finite element implementation Cédric Regrain,Lucien Laiarinandrasana,Sophie Toillon,Kacem Sai International Journal of Plasticity, 2009, 25, pp.1253-1279. ⟨10.1016/j.ijplas.2008.09.010⟩ Article dans une revue istex hal-00390737v1
Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE) Hedi Ben Hadj Hamouda,Lucien Laiarinandrasana,Roland Piques Engineering Fracture Mechanics, 2007, 74, pp.2187-2204. ⟨10.1016/j.engfracmech.2006.10.009⟩ Article dans une revue istex hal-00154573v1
Viscoplastic behaviour of a medium density polyethylene (MDPE) : constitutive equations based on double nonlinear deformation model Hedi Ben Hadj Hamouda,Lucien Laiarinandrasana,Roland Piques International Journal of Plasticity, 2007, 23, pp.1307-1327. ⟨10.1016/j.ijplas.2006.11.007⟩ Article dans une revue istex hal-00154584v1
A multi-scale analysis of the microstructure and the tensile mechanical behaviour of polyamide 66 fibre Alba Marcellan,Anthony R. Bunsell,Lucien Laiarinandrasana,Roland Piques Polymer, 2006, 47, pp.367-378. ⟨10.1016/j.polymer.2005.10.093⟩ Article dans une revue istex hal-00136818v1
Specimen geometry effect on creep crack growth in 316L(N) Lucien Laiarinandrasana,Moulay Kabiri Fatigue and Fracture of Engineering Materials and Structures, 2006, 29, pp.145-155. ⟨10.1111/j.1460-2695.2006.00973.x⟩ Article dans une revue istex hal-00136795v1
Effect of specimen geometries on the C∗ versus da/dt master curve for type 316L stainless steel Lucien Laiarinandrasana,Moulay Rachid Kabiri,Magali Reytier Engineering Fracture Mechanics, 2006, 73 (6), pp.726-737. ⟨10.1016/j.engfracmech.2005.10.004⟩ Article dans une revue istex hal-03359090v1
Damage and fracture of polyvinylidene fluoride (PVDF) at 20°C: Experiments and modelling Mélanie Challier,Jacques Besson,Lucien Laiarinandrasana,Roland Piques Engineering Fracture Mechanics, 2006, 73 (1), pp.79-90. ⟨10.1016/j.engfracmech.2005.06.007⟩ Article dans une revue istex hal-03359092v1

Ouvrages (2)

Constitutive models for rubber V Adnane Boukamel,Lucien Laiarinandrasana,Stephane Méo,Erwan Verron Taylor & Francis Group / Balkema, 460 p., 2008 Ouvrages hal-00284329v1
Constitutive Models for rubbers V Adnane Boukamel,Lucien Laiarinandrasana,Stéphane Méo,Erwan Verron A. Boukamel and L. Laiarinandrasana and S. Méo and E. Verron. Taylor & Francis Group, 2007, 978-0-415-45442-1. ⟨10.1201/9781003759782⟩ Ouvrages hal-01236407v1

Autre publication scientifique (1)

Review of &quot;Deformation and cavitation at the spherulite scale of semi-crystalline polymers Lucien Laiarinandrasana,Olga Klinkova,Cristian Ovalle,Peter Cloetens,Henry Proudhonet al. 2024 Autre publication scientifique hal-04614645v1