Matthieu Museau

51
Documents

Publications

Publications

Thermal characterization of vertical interface by scanning photothermal radiometry

Alejandro Mateos-Canseco , Andrzej Kusiak , Jean-Luc Battaglia , Matthieu Museau , François Villeneuve
Review of Scientific Instruments, 2024, 95 (10), ⟨10.1063/5.0225690⟩
Article dans une revue hal-04847823 v1
Image document

Manufacturing of a Schwarz-P pattern by multi-axis WAAM

Sébastien Campocasso , Maxime Chalvin , Ugo Bourgon , Vincent Hugel , Matthieu Museau
CIRP Annals - Manufacturing Technology, 2023, 72 (1), pp.377-380. ⟨10.1016/j.cirp.2023.04.058⟩
Article dans une revue hal-04156463 v1
Image document

Toward steel strip insertion during wire arc additive manufacturing of aluminum alloy smart part

Pascal Robert , Nicolas Beraud , Matthieu Museau , Maxime Limousin , Henri Paris
Mechanics & Industry, 2023, 24, pp.15. ⟨10.1051/meca/2023014⟩
Article dans une revue hal-04088547 v1
Image document

Effect of temperature and substrate geometry on single aluminium weld bead geometry deposited by Wire Arc Additive Manufacturing: Proposition of an experimental procedure

Maxime Limousin , Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Christelle Grandvallet et al.
CIRP Journal of Manufacturing Science and Technology, 2023, 45, pp.61-68. ⟨10.1016/j.cirpj.2023.06.010⟩
Article dans une revue hal-04140665 v1

Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process

Yann Ledoux , Soukaina Ghaoui , Alex Ballu , Christelle Grandvallet , François Villeneuve et al.
International Journal of Advanced Manufacturing Technology, 2023, ⟨10.1007/s00170-023-11142-5⟩
Article dans une revue hal-04098971 v1
Image document

A new method with ultrasonic mechanism for efficient depowdering of parts produced by electron beam melting

Pierre-Thomas Doutre , Christelle Grandvallet , Matthieu Museau
Mechanics & Industry, 2022, 23, pp.22. ⟨10.1051/meca/2022023⟩
Article dans une revue hal-03744450 v1

Geometrical defect analysis of overhang geometry produced by electron beam melting: experimental and statistical investigations

Yann Ledoux , Soukaina Ghaoui , Thanh Hoang Vo , Alex Ballu , François Villeneuve et al.
International Journal of Advanced Manufacturing Technology, 2022, ⟨10.1007/s00170-022-10040-6⟩
Article dans une revue hal-03767332 v1
Image document

Analysis of geometrical defects in overhang fabrications in electron beam melting based on thermomechanical simulations and experimental validations

Soukaina Ghaoui , Yann Ledoux , Frédéric Vignat , Matthieu Museau , Thanh Hoang Vo et al.
Additive Manufacturing, 2020, 36, pp.101557. ⟨10.1016/j.addma.2020.101557⟩
Article dans une revue hal-02945570 v1
Image document

A method to determine the depowdered height in lattices manufactured by electron beam melting

Aurélien Carré , Matthieu Museau , Frédéric Vignat , Pierre-Thomas Doutre
Journal of Manufacturing Processes, 2018, 34, Part A, pp.1 - 6. ⟨10.1016/j.jmapro.2018.05.025⟩
Article dans une revue hal-01803858 v1

Manufacturing Space Homogeneity in Additive Manufacturing – Electron Beam Melting Case

Alexandre Piaget , Matthieu Museau , Henri Paris
Strojniški vestnik = Journal of Mechanical Engineering, 2017, 63 (10), pp.553-558. ⟨10.5545/sv-jme.2017.4365⟩
Article dans une revue hal-01576205 v1

Comparative environmental impacts of additive and subtractive manufacturing technologies

Henri Paris , Hossein Mokhtarian , Eric Coatanéa , Matthieu Museau , Inigo Flores Ituarte
CIRP Annals - Manufacturing Technology, 2016, 65, pp.29-32. ⟨10.1016/j.cirp.2016.04.036⟩
Article dans une revue hal-01300992 v1

Contribution to the environmental performance of the dry-vibratory drilling technology

Henri Paris , Matthieu Museau
CIRP Annals - Manufacturing Technology, 2012, 61 (1), pp.47 à 50
Article dans une revue hal-00691373 v1

Design and Manufacturing of Microneedles. Toward Sustainable Products ?

Matthieu Museau , Suthep Butdee , Frédéric Vignat
Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 2011, 4 (4), pp.55-62
Article dans une revue hal-00574306 v1

A product-model supporting coupling's management during microproduct design

Matthieu Museau , Arnaud de Grave , Cédric Masclet , Henri Paris
International Journal of Design Engineering, 2009, 2 (4), pp.398-413
Article dans une revue hal-00396437 v1

An Alternative Strategy for Microtooling for Replication Processes

Jožko Valentincic , Oki Blatnik , Davorin Kramar , Henri Orbanic , Cédric Masclet et al.
Strojniški vestnik = Journal of Mechanical Engineering, 2007, 53 (12), pp.806-818
Article dans une revue hal-00371582 v1

Integrated design of MEMS: aiming at manufacturability

Matthieu Museau , Cédric Masclet , Serge Tichkiewitch
International Journal on Interactive Design and Manufacturing, 2007, 1 (3), pp.127-134. ⟨10.1007/s12008-007-0017-1⟩
Article dans une revue hal-00187062 v1
Image document

Integrated design of mycro-electro-mechanical systems

Matthieu Museau , Cédric Masclet
Strojniški vestnik = Journal of Mechanical Engineering, 2006, 52 (7-8), pp.506-514
Article dans une revue hal-03560015 v1
Image document

Une nouvelle méthode pour dépoudrer des pièces issues du procédé de fusion par faisceau d'électrons

Pierre-Thomas Doutre , Christelle Grandvallet , Matthieu Museau
S-MART 2023 -18ème colloque national S.mart, 4-6 avril 2023, Carry le Rouet, France, Arts et Métiers Paristech ENSAM Aix-en-Provence; Université de Toulon, Apr 2023, Carry-Le-Rouet (13), France
Communication dans un congrès hal-04284186 v1
Image document

Approche phénoménologique du contrôle de la géométrie de cordons en WAAM

Diego Verbist , Nicolas Béraud , Matthieu Museau , Frédéric Vignat , Sylvain Lavernhe
18ème colloque national Smart, GIS S.mart, Apr 2023, Carry-le-Rouet, France
Communication dans un congrès hal-04131351 v1
Image document

Support-Free-Material Path Generation for DED Processes from Facetized Data

Lewis Andurand , Vincent Hugel , Sébastien Campocasso , Matthieu Museau
16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME), Jul 2022, Online, Italy. pp.632-637, ⟨10.1016/j.procir.2023.06.108⟩
Communication dans un congrès hal-04197344 v1

Fabrication d’un motif de Schwarz-P par procédé WAAM multi-axes

Ugo Bourgon , Sébastien Campocasso , Maxime Chalvin , Vincent Hugel , Matthieu Museau
Journées Manufacturing'21, May 2022, Besançon, France
Communication dans un congrès hal-03687632 v1
Image document

Equivalent Material analysis of Triply Periodic Minimal Surfaces

Emilio Adrian Ramirez Salazar , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
25ème Congrès Français de Mécanique, Aug 2022, Nantes, France
Communication dans un congrès hal-04102619 v1

Influence des paramètres de conception sur la densité relative de cellules à base de surfaces minimales triplement périodiques (TPMS) pour la fabrication additive

E.A. Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
17e Colloque National S-mart, Mar 2021, en visioconférence, France
Communication dans un congrès hal-03290639 v1

Model of Weld Beads Geometry Produced on Surface Temperatures by Wire and Arc Additive Manufacturing (WAAM)

Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Maxime Limousin
International Conference on Manufacturing Science and Technology (ICMST 2020) 22nd-24th September 2020, Sep 2020, Liverpool, United Kingdom. pp.012008, ⟨10.1088/1757-899x/1063/1/012008⟩
Communication dans un congrès hal-03114712 v1
Image document

Design parameters effects on relative density of triply periodic minimal surfaces for additive manufacturing

E.A. Ramírez , Nicolas Béraud , Franck Pourroy , François Villeneuve , Matthieu Museau
31st CIRP Design Conference 2021, May 2021, Twente, France. pp.13-18, ⟨10.1016/j.procir.2021.05.002⟩
Communication dans un congrès hal-03247860 v1
Image document

A guide to select strain sensors to be embedded in smart metal parts built by WAAM

Pascal Robert , Nicolas Béraud , Matthieu Museau , Henri Paris
Conférence Manufacturing 21, Jun 2021, Angers (Virtuel), France
Communication dans un congrès hal-03350560 v1

Process parameters effect on weld beads geometry deposited by Wire and Arc Additive Manufacturing (WAAM)

Supasit Manokruang , Frédéric Vignat , Matthieu Museau , Maxime Limousin
JCM 2020 - 10th International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Jun 2020, Aix-en-Provence, France. ⟨10.1007/978-3-030-70566-4_3⟩
Communication dans un congrès hal-02933654 v1
Image document

Analyse de la variation géométrique des pièces produites en fabrication additive EBM - Cas de pièces avec volume surplombant

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Thanh Hoang , Matthieu Museau et al.
16e Colloque National S-mart, Apr 2019, Les Karellis, France
Communication dans un congrès hal-02106747 v1
Image document

Recouvrement acier par technologie CMT : Réalisation et propriétés mécaniques

Pascal Robert , Matthieu Museau , Henri Paris , Alexis van Wesemael , Xavier Gostiaux
16ème Colloque National S.mart, Apr 2019, Les Karellis, France
Communication dans un congrès hal-03192506 v1
Image document

Simulation thermomécanique de l'apparition des défauts géométriques sur des pièces produites en fabrication additive EBM

Soukaina Ghaoui , Yann Ledoux , Alex Ballu , Andrzej Kusiak , Matthieu Museau et al.
24ème Congrès Français de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-02945749 v1

Effect of Temperature on the Quality of Welding Beads Deposited with CMT Technology

Pascal Robert , Matthieu Museau , Henri Paris
International conference on industrial engineering and engineering management, Dec 2018, Bangkok, Thailand
Communication dans un congrès hal-01902590 v1

Effet de la température du substrat sur la qualité des cordons déposés avec la technologie CMT

Pascal Robert , Matthieu Museau , Henri Paris
MUGV 2018, Jun 2018, Bordeaux, France
Communication dans un congrès hal-01804820 v1
Image document

Depowdering of lattice structures manufactured by Electron Beam Melting

Aurélien Carré , Matthieu Museau , Pierre-Thomas Doutre
15ème Colloque National AIP-Priméca, Apr 2017, La Plagne, France
Communication dans un congrès hal-01520004 v1

Détection des Porosités en Fabrication Additive Métallique

Alexandre Piaget , Matthieu Museau , Henri Paris
15 ème Colloque National AIP PRIMECA, 2017, La Plagne, France
Communication dans un congrès hal-01576196 v1

Détection des Porosités en Fabrication Additive Métallique

Alexandre Piaget , Matthieu Museau , Henri Paris
23ème Congrés Français de Mécanique, 2017, Lille, France
Communication dans un congrès hal-01576201 v1
Image document

Manufacturing Space Homogeneity in Additive Manufacturing – Electron Beam Melting Case

Alexandre Piaget , Matthieu Museau , Henri Paris
MIT Conference, Laboratory for Alternative Technologies, Uni. of Ljubjana, Slovenia, Sep 2016, Fiesa, Slovenia
Communication dans un congrès hal-01390804 v1

Methodology for design for energy efficiency of production system

Thi Ai Lanh Nguyen Thi Ai , Matthieu Museau , Henri Paris
IDMME – Virtual Concept – Improve – Ingegrag conference, Jun 2014, Toulouse, France
Communication dans un congrès hal-01113233 v1

Différentes pistes pour améliorer l'efficacité énergétique en production de pièces mécaniques

Matthieu Museau , Henri Paris
Machine et Usinage à Grande Vitesse - MUGV 2012, Oct 2012, St Etienne, France. pp.CDROM
Communication dans un congrès hal-00762003 v1

Evaluating energy consumption of production system

Thi Ai Lanh Nguyen , Matthieu Museau , Henri Paris
3rd International Conference on Sustainable Life In Manufacturing, Oct 2012, ISTAMBUL, Turkey. pp.115-119
Communication dans un congrès hal-00786129 v1
Image document

Le projet d'Adaptation Ergonomique du Matériel Musical : Source d'activités pédagogiques à l'Université

Guillaume Thomann , Alain Di Donato , Matthieu Museau , Jacques Cordier , Julie Thony
11ème Colloque National AIP PRIMECA, Apr 2009, La Plagne, France. 10 p
Communication dans un congrès hal-00394161 v1
Image document

An educational perspective to integrate the handicap in the engineering program: case study

Guillaume Thomann , Rahi Rasoulifar , Matthieu Museau , Diana de Castro Perez
The 11th International Conference on Engineering and Product Design Education, E&PDE09, Sep 2009, Brighton, United Kingdom. 6 p
Communication dans un congrès hal-00451842 v1

A product-model suitable for microproducts specificities

Matthieu Museau , Arnaud de Grave , Cédric Masclet , Henri Paris
9th International Conference on Management of Innovative Technologies, MIT' 2007, Oct 2007, Fiesa, Slovenia. pp.CD
Communication dans un congrès hal-00186511 v1

Vers un modèle produit pour la conception des MEMS

Matthieu Museau , Cédric Masclet , Henri Paris
10ème Colloque National AIP PRIMECA, Apr 2007, La Plagne, France. pp.CD-ROM
Communication dans un congrès hal-00182544 v1

Characteristics of MEDM Electrodes Made with Water Jet Machining

Oki Blatnik , H. Orbanic , Cédric Masclet , Henri Paris , Matthieu Museau et al.
The 4M 2006 Conference, Sep 2006, Grenoble, France. pp.CD-ROM
Communication dans un congrès hal-00381830 v1
Image document

Water jet based tooling strategies for micro production

B. Jurisevic , H. Orbanic , J. Valentincic , O. Blatnik , Cédric Masclet et al.
International Workshop and Conference on Multi Material Micro Manufacturing (4M), Budapest University of Technology and Economics; 4M Network of Excellence, Mar 2006, Budapest, Hungary. pp.27-33
Communication dans un congrès hal-00375379 v1

MEMS design process: aiming at manufacturability

Matthieu Museau , Cédric Masclet , Serge Tichkiewitch
IDMME 2006, 2006, Grenoble, France. pp.ISBN: 2-9523979-1-0
Communication dans un congrès hal-00376062 v1
Image document

Integrated Design of MEMS: Designing Manufacturable Products

Matthieu Museau , Cédric Masclet
MIT'05, 8th International Conference on Management of Innovative technologies ; Org. Laboratory for Alternative Technologies, Sep 2005, Fiesa, Slovenia
Communication dans un congrès hal-00375196 v1

Typology of geometrical defects in Electron Beam Melting

T.H. Vo , Matthieu Museau , Frédéric Vignat , François Villeneuve , Y. Ledoux et al.
The 15th CIRP Conference on Computer Aided Tolerancing, Procedia CIRP, 75, pp.92 - 97, 2018, ⟨10.1016/j.procir.2018.04.033⟩
Proceedings/Recueil des communications hal-01912823 v1
Image document

Fabrication additive par dépôt direct multi-axes

Sébastien Campocasso , Matthieu Museau
École thématique. 3ème Ecole technologique du Réseau Des Mécaniciens du CNRS : "Procédés de fabrication additive : règles et méthodes", Carqueiranne, France. 2017
Cours cel-01862901 v1