Maurice PILLET
Publications
Publications
Rapid Optimization Using a Design of Experiments Approach: Application to Aluminum-[18F]Fluoride Radiolabeling Method3èmes Journées Agents d’imagerie moléculaires, GDR-CNRS AIM, Oct 2022, Orléans, France |
|
Rapid Optimization Using a Design of Experiments Approach: Application to Aluminium-[18F]Fluoride Radiolabeling Method29th Young Research Fellows Meeting, Jul 2022, Nantes, France |
|
Tolérancement GPS et PilotageCIGI-QUALITA2021 - Conférence Internationale de Génie Industriel - QUALITA, May 2021, Grenoble, France |
|
Vers un processus de changement plus efficientCIGI-QUALITA 2021 - Conférence Internationale de Génie Industriel - QUALITA, May 2021, Grenoble, France |
|
Why and how moving from SPC (Statistical Process Control) to APC (Automated Process Control)?8th Conference on Design and Modeling of Mechanical Systems, CMSM'2019, Mar 2019, Hammamet, Tunisia |
|
Comment et pourquoi faut-il passer du SPC (Statistical Process Control) à l'APC (Automated Process Control) pour s'intégrer dans une chaine numérique sans ruptureEighth International Congress on Design and Modeling of Mechanical Systems, Mar 2019, Hammamet, Tunisie |
|
|
|
Contrôle Qualité 2.0 : Apprentissage supervisé de la notion de Qualité, application à l’injection plastiqueCIGI-QUALITA 2019, École de Technologie Supérieure de Montréal, Jun 2019, Montréal, Canada |
|
|
Polarimetric Imaging for Quality Control in Injection MoldingQuality Control by Artificial Vision 2019, IRIMAS laboratory, Haute-Alsace University, May 2019, Mulhouse, France. pp.92, ⟨10.1117/12.2522062⟩ |
|
|
Generative Adversarial Networks for geometric surfaces prediction in injection molding2018 IEEE International Conference on Industrial Technology (ICIT), IEEE IES, Lyon 1 University, Ampère Lab, Satie Lab, Feb 2018, Lyon, France. pp.1514-1519, ⟨10.1109/ICIT.2018.8352405⟩ |
|
|
Quality Prediction in Injection MoldingIEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA 2017), IEEE, Jun 2017, Annecy, France. pp.141-146, ⟨10.1109/CIVEMSA.2017.7995316⟩ |
Robust Anomaly Detection Using Reflectance Transformation Imaging for Surface Quality InspectionScandinavian Conference on Image Analysis SCIA 2017, Jun 2017, Tromso, Norway. pp.550-561, ⟨10.1007/978-3-319-59126-1_46⟩ |
|
A haptic quality control method based on the human somatosensory systemIEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA 2017), Jun 2017, Annecy, France. ⟨10.1109/CIVEMSA.2017.7995315⟩ |
|
|
|
Inspection automatisée de surfacesRFQM Rencontres Francophones sur la Qualité et la Mesure 2017, CAFMET, Mar 2017, Nantes, France |
|
|
Plan d'expériences " Definitive Screening Design " , une alternative crédible aux plans composites centrés ?Qualita 2017, Sep 2017, Bourges, France |
|
|
Pilotage en Injection Plastique – Etat de l’Art12ème Congrès International de Génie Industriel (CIGI 2017), May 2017, Compiègne, France |
Augmenting Human Haptic Perceptions through Knowledge Modeling for Industrial Quality ControlJCI (Journée du Campus d'Illkirch), Mar 2017, Illkirch, France |
|
|
|
A Smart System to Standardize the Specifications of Haptic Quality Control,21st International Conference, KES-2017 (2017-09-06, 2017-09-08: Marseille, France), Sep 2017, Marseille, France. pp.723-730, ⟨10.1016/j.procs.2017.08.155⟩ |
|
|
Inspection visuelle automatisée de surfaces : Perspectives d'évolutions industrielles Echelle d'inspection, quantité d'information acquise et apprentissage non-supervisé15ème Colloque National AIP-Priméca : Concevoir et produire dans les industries du futur., AIP-Priméca, Apr 2017, La Plagne, France |
|
|
Vers un pilotage de la qualité des pièces injectées15ème Colloque National AIP PRIMECA : "Concevoir et produire dans les industries du futur", AIP Primeca, Apr 2017, La Plagne, France |
|
|
Réglage ultra-précis des usinages9ème assises Machine et Usinage à Grande Vitesse (MUGV2016), Jun 2016, Tours, France |
Generic and structured description of tactile sensory perceptionsKEER2016 INTERNATIONAL CONFERENCE ON KANSEI ENGINEERING AND EMOTION RESEARCH, Aug 2016, LEEDS, United Kingdom |
|
A Smart System for Haptic Quality Control Introducing an Ontological Representation of Sensory Perception KnowledgeKEOD - Knowledge Engineering and Ontology Development, Porto, Portugal, IC3K, novembre 2016, Nov 2016, Porto, Portugal |
|
|
|
Contrôle progressif aux mesures - méthode S. Proposition d'une approche graphique10ème conférence francophone de la modélisation,optimisation et simulation (MOSIM'14), Nov 2014, Nancy, France |
|
|
Syntactic texture and perception for a new generic visual anomalies classificationQuality Control by Artificial Vision (QVAV), Jun 2015, Le Creusot, France. ⟨10.1117/12.2182819⟩ |
|
|
Extended visual appearance texture featuresMeasuring, Modeling, and Reproducing Material Appearance, Feb 2015, San Francisco, CA, United States. ⟨10.1117/12.2081622⟩ |
|
|
Discrete Modal Decomposition for surface appearance modelling and renderingSPIE Optical Metrology, Jun 2015, Munich, Germany. pp.952523, ⟨10.1117/12.2184840⟩ |
Améliorer la performance industrielle par une meilleure gestion des emails11e CONGRES INTERNATIONAL DE GENIE INDUSTRIEL – CIGI2015 Québec, Canada, Québec, Canada, Oct 2015, Québec, Canada |
|
|
|
Vers une automatisation du contrôle visuel des produitsQUALITA' 2015, Mar 2015, Nancy, France |
|
|
Tolérancement inertiel pour processus à dérive - Optimiser le tolérancement statistiqueQUALITA' 2015, Mar 2015, Nancy, France |
Tolérancement inertiel, Calcul Optimal11e CONGRES INTERNATIONAL DE GENIE INDUSTRIEL – CIGI2015 Québec, Canada, Oct 2015, Québec, Canada |
|
|
|
Lecture Alternative Pour Mettre en OEuvre le Supply Chain ManagementQUALITA' 2015, Mar 2015, Nancy, France |
CoSelect : Correction statistique et sélective des procédés de fabrication10ème conférence Francophone de modélisation, Optimisation et Simulation- MOSIM'14, Nov 2014, NANCY, France |
|
Pilotage complexe de machines à commande numériques multiaxes Pilotage inertiel totalISA - France - Maîtrise et optimisation des processus complexes, Oct 2014, Angers, France |
|
Macroscopic exploration and visual quality inspection of thin film depositSPIE ADVANCED LITHOGRAPHY, Feb 2014, San Jose, United States. pp.NC, ⟨10.1117/12.2046246⟩ |
|
|
|
Paramétrage de la démarche "Sureté de FonctionnementQUALITA2013, Mar 2013, Compiègne, France |
|
|
Multivariate SPC for Total Inertial TolerancingQUALITA2013, Mar 2013, Compiègne, France |
|
|
Structuration des démarches de progrès10eme congrès international de Génie Industriel CIGI 2013, Jun 2013, La Rochelle, France. http://cigi13.eigsi.fr/Documents/Articles/VA1/cigi2013_submission_5.pdf |
|
|
Détection du déréglage le plus probable d'un processus d'usinage par outil coupantConception & Production Intégrées, Oct 2013, Tlemcen, France. papier 297 |
|
|
Measurement of the perceived quality of a product - Characterization of aesthetic anomalies.QUALITA2013, Mar 2013, Compiègne, France |
Proposition d'une approche méthodologique pour réduire la variabilité dans le contrôle visuel à but esthétique.ICSM2012, Mar 2012, ANNECY, France. pp.1-11 |
|
Neural network for improvement of the visual quality process.International conference on Kansei engineering and emotional research, May 2012, Penghu, Taiwan |
|
Proposal of a methodological approach to reduce variability in the visual inspection.International Conference On Surface Metrology ICSM'2012, Annecy, France., Mar 2012, ANNECY, France. pp.1-11 |
|
Utilisation du tolérancement géométrique pour le réglage des machines-outils : Le pilotage inertiel total.MUVG 2012, Oct 2012, SAINT ETIENNE, France. pp. NC |
|
|
|
Process plans and manufacturing dimensions for the steering of machining: The Copilot-Pro methodology12th CIRP Conference on Computer Aided Tolerancing, Apr 2012, Huddersfield, United Kingdom. pp.1--12 |
Stratégies de réglage optimales d'un processus de fabrication mécanique.MUGV 2012, Oct 2012, SAINT ETIENNE, France. pp. NC |
|
Sensory analysis applied in the particular case of visual inspection of products.9th Pangborn Sensory Science Symposium, Sep 2011, Toronto, Canada |
|
Contrôle visuel des produits : comparaison des méthodes d'évaluation des anomalies d'aspectQualita 2011, Mar 2011, Angers, France |
|
Détermination d'une règle de réglage dans le cas du pilotage inertiel multicritèresQualita 2011, Mar 2011, Angers, France |
|
|
|
Recherche d'une règle de réglage fondée sur la fonction de distribution des écarts de production et de réglage.7ème Conférence Internationale en Conception & Production Intégrée, Oct 2011, Oujda, Maroc |
|
|
Différentes stratégies de filtrage en pilotage inertiel multicritères.7ème Conférence Internationale en Conception & Production Intégrées, Oct 2011, Oujda, Maroc |
Evaluation quantitative de l'arbre de défaillance par une cotation subjective type AMDECQualita 2011, Mar 2011, Angers, France |
|
Copilot Pro® : Une méthode complète pour le pilotage des usinagesQualita 2011, Mar 2011, Angers, France |
|
A Push-Pull Manufacturing Strategy: Analytical Model in the Screw Cutting SectorWorld Congress on Engineering 2010, Jun 2010, London, United Kingdom. 7 p |
|
|
|
Sensory perception of surfaces quality - Industrial practices and prospectsKEER 2010 - INTERNATIONAL CONFERENCE ON KANSEI ENGINEERING AND EMOTION RESEARCH, Mar 2010, Paris, France. pp.252 |
Critical analysis of a flow optimisation methodology by value stream mappingInternational Conference on Advances in Production Management Systems, 2010, Como, Italy |
|
Inertial tolerancing according to Geometrical Product Specification Standard applied to stack upThe CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, Mar 2009, Annecy, France. pp.cd rom |
|
The watch making micro assembly problem, inertial tolerancing the solution?The CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, Mar 2009, Annecy, France |
|
An approach to identify ressources of opportunity: an industrial case study.2ème Congrès International sur l'Ingénierie des Risques Industriels, May 2009, Reims, France |
|
Construire des plans de surveillance au juste nécessaire dans un délai court8ème Congrès International de Génie Industriel, Jun 2009, Tarbes, France |
|
Watch making specificity, inertial tolerancing a solution CIRP conference on Computer Aided TolerancingCIRP conference on Computer Aided Tolerancing, Mar 2009, Annecy, France |
|
La matrice d'impact : un outil pour déterminer les caractéristiques spéciales en fonction de leur réelle influence sur les fonctionnalités du produitQualita 2009, Mar 2009, Besançon, France |
|
|
|
Optimisation de la taille de la série : illustration par un cas industriel de sous-traitance mécanique.Congrès International de Génie Industriel CIGI'09, Jun 2009, Tarbes, France. 7 p |
Détermination des paramètres d'une carte de contrôle dans un contexte de tolérancement inertielQualita 2009, Mar 2009, France |
|
Proposition d'une mesure inertielle de la qualité d'un objet évalué par analyse sensorielleQualita 2009, Mar 2009, Besançon, France |
|
Tolérancement inertiel total - Une autre façon de tolérancer et de piloter la production de produits mécaniques.CPI 2009, Oct 2009, Rabat, Maroc |
|
Validation of a reception or production control process by the inertial indicator IGCIRP conference on Computer Aided Tolerancing, Mar 2009, Annecy, France |
|
|
|
A method to identify critical resources: Illustration by an industrial case.1st International Conference on Business Sustainability 2008, Jun 2008, Ofir, Portugal |
Optimisation des ressources critiques dans un contexte de sous-traitance mécaniqueJournée doctorale, Nov 2008, Chambéry, France |
|
Control of variability for man measurement12th IMEKO TC1-TC7 joint Symposium on Man, Science and Measurement, Sep 2008, Annecy, France |
|
Analysis of an assembly with form errors5th international conference in Integrated Design and Production, Oct 2007, Rabat, Morocco |
|
Inertial tolerancing applied to 3D and form tolerancing with the modal analysis10th CIRP conference on Computer Aided Tolerancing (CAT 2007), Mar 2007, Erlangen, Germany |
|
Control processes: reflexions on geometrical indicators of capability10th CIRP International Conference on Computer Aided Tolerancing CAT2007, Oct 2007, Erlangen, Germany |
|
Métrologie sensorielle pour un contrôle visuel des produits13ème Congrès International de Métrologie, Jun 2007, Lille, France |
|
A study of supporting programs for small and medium enterprises: a first stage going to "LeanInternational Conference on Industrial Engineering and Engineering Management, Dec 2007, singapour, Singapore |
|
Changeover from the functional geometric tolerances to the dimensional parameters to supervise in productionComputer Aided Tolerancing (CAT) 2007, 2007, Erlangen, Germany |
|
Peut-on construire un système de production mieux que le Lean ?12ème édition Progiciels-Expo Qualita 2007, Oct 2007, Annecy-le-Vieux, France |
|
Organisation métrologique pour un contrôle qualité visuelCongrès international de Génie Industriel CIGI 07, Jun 2007, Trois Rivières Québec, Canada |
|
Build your control plan in a design to risk objective - a new way to use Process FMEA19th International conference on production research - ICPR19, Jul 2007, Valparaiso, Chile |
|
Guarantying a maximum of non-conformity rate on the assembly resultant with a statistical tolerancing approachComputer Aided Tolerancing (CAT) 2007, 2007, Erlangen, Germany |
|
Une première étape vers le Lean dans les entreprises de sous-traitance mécanique (Retour sur 7 ans de pratique)5ème Conférence Internationale Conception et Production Intégrées CPI'2007, Oct 2007, Rabat, Maroc |
|
Acquisition and validation of the two types of expertise of a visual controlInternational Conference on Industrial Engineering and Systems Management, Jun 2007, Beijing, China |
|
La matrice d'impact pour construire un plan de surveillance avec les contraintes de l'ingénierie simultanée.5th International Seminar Integrated Design and Production, Oct 2007, Rabat, Maroc. pp.NC |
|
Formalization of subjective knowledge by the sensory analysisGlobal Manufacturing and Innovation GMI’2006, Jul 2006, Coimbatore, India |
|
Formalisation des connaissances subjectives par l'analyse sensorielleSemaine de la Connaissance SDC'06, Jun 2006, Nantes, France |
|
Une approche globale pour l'évaluation des bonnes pratiques6ème Congrès International Pluridiciplinaire Qualité et Sûreté de Fonctionnement QUALITA’2005, Mar 2005, Bordeaux, France |
|
Modélisation d'une démarche de pérennisation, Application pour une démarche MSP6ème Congrès International Pluridiciplinaire Qualité et Sûreté de Fonctionnement QUALITA’2005, Mar 2005, Bordeaux, France |
|
|
|
Six Sigma une rupture dans l'approche qualitéColloque ISMQ, Feb 2003, Bordeaux, France |
Duality between control and qualityQUALITA 2003, Nancy, France, 2003, Unknown, Unknown Region |
|
|
|
Identification et caractérisation d'une "bonne pratique" industrielle pour un benchmarking interne5e congrès international de génie industriel, Oct 2003, Québec, Canada. 11 p |
|
|
Le tolérancement inertiel, une autre façon d'intégrer l'aspect combinatoire dans les processus assemblésCPI 2001, 2001, Fes, Maroc. 12 p |
|
|
Qualité des produits et conformité... I'objectif cible de la conception à la fabricationMICAD 2001, Mar 2001, Paris, France |
|
|
ANALYSE DES DEFAUTS POUR L'AMELIORATION DE LA QUALITE (ADAQ)Qualita 2001, Mar 2001, Annecy, France. 9 p |
|
|
L'OBJECTIF CIBLE ET LA DETERMINATION STATISTIQUE DES TOLERANCESQualita 2001, Mar 2001, Annecy, France. pp.8 Pages |
|
|
Les conditions nécessaires pour la réussite d'un projet de maîtrise des procédés dans les entreprisesJournées de Statistique Société Française de Statistique, May 2000, Fes, Maroc |
|
|
Intégrer la connaissance des experts dans la démarche expérimentale par les Plans d'Expériences Flous Bayésiens : application à la conception d'un commutateur de puissanceLambda mu 2000, Mar 2000, Montpellier, France. 12 p |
|
|
Qualité des produits et qualité des caractéristiques élémentaires, l'objectif cible de la conception à la fabricationQualita 99, 1999, Paris, France. 12 p |
|
|
Quality System and Product QualityLogistics in the changing World, Jul 1999, Varna, Bulgaria |
|
|
Journée "Robustesse" Petit mémento des principes des basesJournée Robustesse - Société Française de Statistique, Feb 1998, Paris, France |
|
|
DE NOUVEAUX INDICATEURS DE CAPABILITE BASES SUR LE BON FONCTIONNEMENT DES PRODUITSQualita 97, 1997, Angers, France. 12 p |
|
|
Viser la cible pour une meilleure maîtrise des procédés une meilleure qualité des produits7eme Journée des CPIM de France 1997, 1997, Paris, France. pp.CDROM |
|
|
METHODE DE CALCUL DE LA FIABILITE PREVISIONNELLE ASSOCIANT PLANS D'EXPERIENCES ET JUGEMENTS D'EXPERTSQualita 97, 1997, Angers, France. 12 p |
|
|
AN OPTIMAL CONTROL CHART FOR NON-NORMAL PROCESSES1st IFAC Workshop on Manufacturing Systems: Manufacturing Modelling, Management and Control, 1997, Austria. 12 p |
|
|
Optimization of a Synthetic Step Using a Design of Experiments Approach: Application to a Late-Stage Radiolabeling Method by Aluminium-[18F]Fluoride CoordinationEFMC-ISMC 2022 _ XXVll EFMC International Symposium on Medicinal Chemistry, Sep 2022, Nice, France |
Gestion de production : Les fondamentaux et les bonnes pratiques.Editions d'Organisation, pp.476, 2011 |
|
Améliorer la productivité - Déploiement industriel du tolérancement inertielEdition d'organisation, pp.220, 2010 |
|
Qualitade na ProduçãoLidel, pp.408, 2009 |
|
Gestion de Productionédition d'organisation - Eyrolles, pp.454, 2006, Références |
|
Appliquer la Maitrise Statistique des processusédition d'organisation - Eyrolles, pp.530, 2005 |
|
Qualité en Production : De l'ISO 9000 à Six Sigma.édition d'organisation - Eyrolles, pp.406, 2005, Références |
|
Six Sigma - comment l'appliquerédition d'organisation - Eyrolles, pp.485, 2003 |
|
Les plans d'expériences par la méthode TaguchiMaurice Pillet, pp.250, 2001 |
A Smart System for Haptic Quality Control: A Knowledge-Based Approach to Formalize the Sense of Touch InSpringer, Cham. Knowledge Discovery, Knowledge Engineering and Knowledge Management. 9th International Joint Conference, IC3K 2017, Funchal, Madeira, Portugal, November 1-3, 2017, Revised Selected Papers, 914, Ana FredDavid AveiroJan L. G. DietzKecheng LiuJorge BernardinoAna SalgadoJoaquim Filipe, pp.173-190, 2019, 978-3-030-15639-8. ⟨10.1007/978-3-319-99701-8_8⟩ |
|
|
|
Visual quality inspection and fine anomalies: methods and applicationSvetan Ratchev. Precision Assembly Technologies and Systems : 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers, AICT-435, Springer, pp.94-106, 2014, IFIP Advances in Information and Communication Technology, 978-3-662-45585-2. ⟨10.1007/978-3-662-45586-9_13⟩ |
MBA : L'essentiel du management par les meilleurs professeursMBA : L'essentiel du management par les meilleurs professeurs, Editions d'Organisation, Chapitre 5 - Six Sigma, 2008 |
|
Mention Gestion et management - Commencez avec les meilleurs professeursMention Gestion et management - Commencez avec les meilleurs professeurs, Eyrolles, Chapitre 6 - Gestion de management, 2007, Mention |
|
: Le benchmarking, comment identifier et caractériser les bonnes pratiquesGestion Dynamique des Connaissances Industrielles (B. Eynard, M. Lombard, N. Matta et J. Renaud eds.) - Hermes Science publications : Lavoisier, pp.150-175, 2004, IC2. Informatique et systèmes d’information., 2004 |
|
Pilotage par la QualitéPatrick Pujo and Jean-Paul Kieffer. Méthodes du Pilotage des Systèmes de Production, Hermè s - Lavoisier, 2002 |
Tolérancement Inertiel Total - Une approche qui révolutionne les concepts de tolérancement, de conformité et de pilotage en production2009 |
|
Construction des plans de validation/surveillance optimisés à partir de l'importance réelle des caractéristiques définie par la matrice d'impact2009 |
|
Lean et Qualité, cas d'application dans l'industrie horlogère2009 |
|
Pilotage des machines CN en inertiel total si on passait au 21ème siècle2009 |
|
La construction d'un système de production adapté aux PME de sous-traitance mécanique.2007 |
Identification, évaluation et représentation des meilleures pratiques industrielles (Best Practices)[Rapport de recherche] LISTIC; CRISTO; IPI. 2005 |