Pierre LHUISSIER Chargé de Recherche/HDR du CNRS au laboratoire SIMAP - CNRS - Univ. Grenoble Alpes

Publications

Article dans une revue (77)

Investigation of cracking kinetics during cavitation erosion by in-situ X-ray tomography Julien Hofmann,Alexandre Margueret,Michel Riondet,Marta Majkut,Elodie Bolleret al. Wear, 2026, 584-585, pp.206423. ⟨10.1016/j.wear.2025.206423⟩ Article dans une revue hal-05429022v1
Microstructural features governing the effective thermal conductivity of Cu-25Cr sintered composites Lucas Varoto,Elodie Courtois,Raymond Kwesi Nutor,Sophie Roure,Anthony Papillonet al. Acta Materialia, 2025, 301, pp.121601. ⟨10.1016/j.actamat.2025.121601⟩ Article dans une revue hal-05319082v1
Effective Super-Resolution X-ray Tomography using MSDnet for Nondestructive Testing of Metallic Lattices: Analysis of Training Dynamics and Strategies Antoine Klos,Luc Salvo,Pierre Lhuissier Journal of Nondestructive Evaluation, 2025, 44 (4), pp.142. ⟨10.1007/s10921-025-01273-y⟩ Article dans une revue hal-05405140v1
In situ porosity imaging with synchrotron X-ray Tomography during laser rescanning of Zr-based metallic glass by Laser Powder Bed Fusion Camille Pauzon,Rémi Daudin,Pierre Lhuissier,Xavier Bataillon,Pierre Lapougeet al. Additive Manufacturing Letters, 2025, 15, pp.100318. ⟨10.1016/j.addlet.2025.100318⟩ Article dans une revue hal-05216282v1
Cu-25Cr composites processed by in situ alloying in electron beam powder bed fusion Lucas Varoto,Elodie Courtois,Mélanie Prost,Pierre Lhuissier,Jean-Jacques Blandinet al. Additive Manufacturing, 2025, 109, ⟨10.1016/j.addma.2025.104869⟩ Article dans une revue hal-05373719v1
Spatially distributed porosity: A laser powder bed fusion strategy to enhance plasticity in Zr-based metallic glass without yield stress drop Camille Pauzon,Rémi Daudin,Muhammad Fakhry Hatta,Pierre Lhuissier,Jean-Jacques Blandin Materials & Design, 2025, 260, pp.115145. ⟨10.1016/j.matdes.2025.115145⟩ Article dans une revue hal-05380885v1
Super-resolution X-ray tomography using deep learning applied to the 3D quantification of defects in lattice structures Antoine Klos,Luc Salvo,Pierre Lhuissier Scientific Reports, 2025, 15 (1), pp.36664. ⟨10.1038/s41598-025-20372-4⟩ Article dans une revue hal-05405024v1
Microstructure evolutions induced by electron beam melting of a sintered Cu-25Cr composite Lucas Varoto,Pierre Lhuissier,Marta Majkut,Jean-Jacques Blandin,Sophie Roureet al. Materialia, 2024, 38, pp.102262. ⟨10.1016/j.mtla.2024.102262⟩ Article dans une revue hal-04763228v1
Influence of the processing route on the mechanical properties of Cu–35Cr metal matrix composites Lucas Varoto,Pierre Lhuissier,Jean-Jacques Blandin,Sophie Roure,Anthony Papillonet al. Materials Science and Engineering: A, 2024, 908, pp.146953. ⟨10.1016/j.msea.2024.146953⟩ Article dans une revue hal-04763184v1
Multi-scale Cu-Cr composites using elemental powder blending in laser powder-bed fusion Lucas Varoto,Pierre Lhuissier,Sophie Roure,Anthony Papillon,Mélissa Chossonet al. Scripta Materialia, 2024, 242, pp.115957. ⟨10.1016/j.scriptamat.2023.115957⟩ Article dans une revue hal-04748085v1
In-situ 3D X-ray investigation of ceramic powder sintering at the particle length-scale Aatreya Manjulagiri Venkatesh,Didier Bouvard,Pierre Lhuissier,Julie Villanova,Cyril Rajon Ceramics International, 2024, 50 (3), pp.4715-4728. ⟨10.1016/j.ceramint.2023.11.216⟩ Article dans une revue hal-04311320v1
Multi-scale Cu-Cr composites using elemental powder blending in laser powder-bed fusion Lucas Varoto,Pierre Lhuissier,Sophie Roure,Anthony Papillon,Mélissa Chossonet al. Scripta Materialia, 2024, 242, pp.115957. ⟨10.1016/j.scriptamat.2023.115957⟩ Article dans une revue hal-04763180v1
Influence of the processing route on the mechanical properties of Cu–35Cr metal matrix composites Lucas Varoto,Pierre Lhuissier,Jean-Jacques Blandin,Sophie Roure,Anthony Papillonet al. Materials Science and Engineering: A, 2024, 908, pp.146953. ⟨10.1016/j.msea.2024.146953⟩ Article dans une revue hal-04748060v1
Influence of microstructure heterogeneity on the tensile response of an Aluminium alloy designed for laser powder bed fusion Maxence Buttard,Béchir Chéhab,Charles Josserond,Frédéric Charlot,Pierre Lhuissieret al. Acta Materialia, 2024, 269, pp.119786. ⟨10.1016/j.actamat.2024.119786⟩ Article dans une revue hal-04610418v1
Influence of microstructure heterogeneity on the tensile response of an Aluminium alloy designed for laser powder bed fusion Maxence Buttard,Béchir Chéhab,Charles Josserond,Frédéric Charlot,Pierre Lhuissieret al. Acta Materialia, 2024, 269, pp.119786. ⟨10.1016/j.actamat.2024.119786⟩ Article dans une revue hal-04763232v1
Exploring the sintering behavior of a complex ceramic powder system using in-situ X-ray nano-tomography Aatreya Manjulagiri Venkatesh,Roberto Barbano,Didier Bouvard,Pierre Lhuissier,Julie Villanovaet al. Journal of the European Ceramic Society, 2024, 44 (12), pp.7236-7245. ⟨10.1016/j.jeurceramsoc.2024.05.027⟩ Article dans une revue hal-04596578v1
Microstructure evolutions induced by electron beam melting of a sintered Cu-25Cr composite Lucas Varoto,Pierre Lhuissier,Marta Majkut,Jean-Jacques Blandin,Sophie Roureet al. Materialia, 2024, 38, pp.1-8. ⟨10.1016/j.mtla.2024.102262⟩ Article dans une revue hal-04746398v1
Implementation of grain mapping by diffraction contrast tomography on a conventional laboratory tomography setup with various detectors Haixing Fang,Wolfgang Ludwig,Pierre Lhuissier Journal of Applied Crystallography, 2023, 56, pp.810-824. ⟨10.1107/S1600576723003874⟩ Article dans une revue hal-04305375v1
Towards an alloy design strategy by tuning liquid local ordering: What solidification of an Al-alloy designed for laser powder bed fusion teaches us Maxence Buttard,Guilhem Martin,Xavier Bataillon,Gilles Renou,Pierre Lhuissieret al. Additive Manufacturing, 2023, 61, ⟨10.1016/j.addma.2022.103313⟩ Article dans une revue hal-04273110v1
Comparison of acoustic and hydrodynamic cavitation: material point of view Julien Hofmann,Charles Thiébaut,Michel Riondet,Pierre Lhuissier,Sylvain Gaudionet al. Physics of Fluids, 2023, 35 (1), ⟨10.1063/5.0132085⟩ Article dans une revue hal-03908713v1
3D analysis of ceramic powder sintering by synchrotron X-ray nano-tomography Aatreya Manjulagiri Venkatesh,Didier Bouvard,Pierre Lhuissier,Julie Villanova Journal of the European Ceramic Society, 2023, 43 (6), pp.2553-2563. ⟨10.1016/j.jeurceramsoc.2022.12.065⟩ Article dans une revue hal-03999796v1
3D microstructure characterization of Cu 25Cr solid state sintered alloy using X-ray computed tomography and machine learning assisted segmentation Lucas Varoto,Jean-Jacques Blandin,Pierre Lhuissier,Sophie Roure,Anthony Papillonet al. Materials Characterization, 2023, 203, pp.113107. ⟨10.1016/j.matchar.2023.113107⟩ Article dans une revue hal-04300667v1
Advanced analysis of the bias-extension of woven fabrics with X-ray microtomography and Digital Volume Correlation O. Stamati,L. Orgeas,S. Rolland Du Roscoat,P. Lhuissier,P. J. J. Dumontet al. Composites Part A: Applied Science and Manufacturing, 2023, 175, ⟨10.1016/j.compositesa.2023.107748⟩ Article dans une revue hal-04661866v1
Air-drying of 3D printed part made of ligno-cellulosic fibres: 3D real-time monitoring combining sub-minute laboratory X-ray microtomography and digital volume correlation H. Murtaza,S. Rolland Du Roscoat,P. Lhuissier,L. Salvo,Laurent Orgéaset al. Cellulose, 2023, 30 (10), pp.6173-6185. ⟨10.1007/s10570-023-05290-w⟩ Article dans une revue hal-04193461v1
Towards an alloy design strategy by tuning liquid local ordering: What solidification of an Al-alloy designed for laser powder bed fusion teaches us Maxence Buttard,Guilhem Martin,Xavier Bataillon,Gilles Renou,Pierre Lhuissieret al. Additive Manufacturing, 2023, 61, pp.103313. ⟨10.1016/j.addma.2022.103313⟩ Article dans une revue hal-04763242v1
Optimal parameters estimation for K-edge subtraction imaging using PixiRad-2/PixieIII photon counting detector on a conventional laboratory X-ray micro-tomograph. R. Granger,L. Salvo,S. Rolland Du Roscoat,Pierre Lhuissier Journal of Instrumentation, 2023, 18 (02), pp.P02006. ⟨10.1088/1748-0221/18/02/P02006⟩ Article dans une revue hal-04300705v1
Miniature laser powder bed fusion system for in situ synchrotron x-ray micro-computed tomography experiments at the European Synchrotron Radiation Facility Pierre Lhuissier,Louis Hébrard,Xavier Bataillon,Pierre Lapouge,Frédéric Costeet al. Review of Scientific Instruments, 2022, 93 (8), pp.083701. ⟨10.1063/5.0090623⟩ Article dans une revue hal-03845027v1
Stabilizing post-yielding behavior of a stretching dominated lattice structure through microstructural optimization Mathis Duport,Guilhem Martin,Pierre Lhuissier,Jean-Jacques Blandin,Frédéric Primaet al. Scripta Materialia, 2022, 219, pp.114887. ⟨10.1016/j.scriptamat.2022.114887⟩ Article dans une revue hal-03863809v2
Mechanisms and kinetics of pore closure in thick aluminum plate P. Gravier,F. Mas,A. Barthelemy,E. Boller,L. Salvoet al. Journal of Materials Processing Technology, 2022, 303, pp.117499. ⟨10.1016/j.jmatprotec.2022.117499⟩ Article dans une revue hal-03611170v1
Elementary growth mechanisms of creep cavities in AZ31 alloy revealed by in situ X-ray nano-tomography R. Kumar,P. Lhuissier,J. Villanova,L. Salvo,J.J. Blandin Acta Materialia, 2022, 228, pp.117760. ⟨10.1016/j.actamat.2022.117760⟩ Article dans une revue hal-03863817v1
Tailoring the crystallographic texture of pure copper through control of the scanning strategy in Electron Powder Bed Fusion Alizée Thomas,Guillaume Fribourg,Jean-Jacques Blandin,Pierre Lhuissier,Rémy Dendievelet al. Materialia, 2022, 24, pp.101495. ⟨10.1016/j.mtla.2022.101495⟩ Article dans une revue hal-03760679v1
Pore closure in thick aluminum plate: From industrial hot rolling to individual pore observation P. Gravier,F. Mas,A. Barthelemy,E. Boller,L. Salvoet al. Journal of Materials Processing Technology, 2022, 303, pp.117509. ⟨10.1016/j.jmatprotec.2022.117509⟩ Article dans une revue hal-03611169v1
Optimization of the strength vs. conductivity trade-off in an aluminium alloy designed for laser powder bed fusion Melek Genc,Pierre Eloi,Jean-Jacques Blandin,Céline Pascal,Patricia Donnadieuet al. Materials Science and Engineering: A, 2022, 858, pp.144139. ⟨10.1016/j.msea.2022.144139⟩ Article dans une revue hal-03863745v1
Reconstructing dual-phase nanometer scale grains within a pearlitic steel tip in 3D through 4D-scanning precession electron diffraction tomography and automated crystal orientation mapping Patrick Harrison,Xuyang Zhou,Saurabh Mohan Das,Pierre Lhuissier,Christian H. Liebscheret al. Ultramicroscopy, 2022, 238, pp.113536. ⟨10.1016/j.ultramic.2022.113536⟩ Article dans une revue hal-03763041v1
Reconstruction algorithms for grain mapping by laboratory X-ray diffraction contrast tomography Haixing Fang,Wolfgang Ludwig,Pierre Lhuissier Journal of Applied Crystallography, 2022, 55, pp.1652-1663. ⟨10.1107/S1600576722010214⟩ Article dans une revue hal-03955848v1
Behavior by design made possible by additive manufacturing: The case of a whistle-blower mechanical response Emeric Plancher,Mathieu Suard,Rémy Dendievel,Jean-Jacques Blandin,Guilhem Martinet al. Materials Letters, 2021, 282, pp.128669. ⟨10.1016/j.matlet.2020.128669⟩ Article dans une revue hal-02952481v1
Effect of the build orientation on mechanical and electrical properties of pure Cu fabricated by E-PBF Alizée Thomas,Guillaume Fribourg,Jean-Jacques Blandin,Pierre Lhuissier,Rémy Dendievelet al. Additive Manufacturing, 2021, 48 (Part A), pp.102393. ⟨10.1016/j.addma.2021.102393⟩ Article dans une revue hal-03863799v1
In-situ layerwise monitoring of electron beam powder bed fusion using near-infrared imaging Guillaume Croset,Guilhem Martin,Charles Josserond,Pierre Lhuissier,Jean-Jacques Blandinet al. Additive Manufacturing, 2021, 38, pp.101767. ⟨10.1016/j.addma.2020.101767⟩ Article dans une revue hal-03427100v1
High-temperature deformation followed in situ by X-ray microtomography: a methodology to track features under large strain Pierre Lhuissier,Therese Bormann,Guillaume Pelloux,Xavier Bataillon,Franck Pellouxet al. Journal of Synchrotron Radiation, 2021, 28, pp.530 - 537. ⟨10.1107/s1600577521001107⟩ Article dans une revue hal-03427096v1
On the growth and structure of Al2O3-Y3Al5O12-ZrO2:Y solidified eutectic M. Cherif,Thierry Duffar,L. Carroz,P. Lhuissier,E. Bautista-Quisbert Journal of the European Ceramic Society, 2020, 40 (8), pp.3172-3180. ⟨10.1016/j.jeurceramsoc.2020.03.025⟩ Article dans une revue hal-03266522v1
Surface defects sensitivity during the unfolding of corrugated struts made by powder-bed Additive Manufacturing Mathieu Suard,Emeric Plancher,Guilhem Martin,Rémy Dendievel,Pierre Lhuissier Advanced Engineering Materials, 2020, ⟨10.1002/adem.202000315⟩ Article dans une revue hal-03021833v1
In situ 3D X-ray microtomography of laser-based powder-bed fusion (L-PBF) - A feasibility study Pierre Lhuissier,Xavier Bataillon,Camille Maestre,Julien Sijobert,Elodie Cabrolet al. Additive Manufacturing, 2020, 34, ⟨10.1016/j.addma.2020.101271⟩ Article dans une revue hal-02558318v1
Strength of porous oxide microspheres: the role of internal porosity and defects Paul Parant,Sébastien Picart,Pierre Lhuissier,Christophe L. Martin Journal of the European Ceramic Society, 2020, 40 (4), pp.1613-1619. ⟨10.1016/j.jeurceramsoc.2019.11.075⟩ Article dans une revue hal-03273553v1
Effect of temperature on deformation mechanisms of AZ31 Mg-alloy under tensile loading Thibaut Dessolier,Pierre Lhuissier,Francine Roussel-Dherbey,Frédéric Charlot,Charles Josserondet al. Materials Science and Engineering: A, 2020, 775, pp.138957. ⟨10.1016/j.msea.2020.138957⟩ Article dans une revue hal-02952190v1
Arthropod entombment in weathering-formed opal: new horizons for recording life in rocks Boris Chauviré,Mickal Houadria,Aline Donini,Brian T Berger,Benjamin Rondeauet al. Scientific Reports, 2020, 10, pp.10575. ⟨10.1038/s41598-020-67412-9⟩ Article dans une revue hal-02952984v1
A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing Alexis Burr,Théo Persenot,Pierre-Thomas Doutre,Jean-Yves Buffiere,Pierre Lhuissieret al. International Journal of Fatigue, 2020, 139, pp.105769. ⟨10.1016/j.ijfatigue.2020.105769⟩ Article dans une revue hal-02952483v1
In situ investigation of atmospheric plasma-sprayed Mn–Co–Fe–O by synchrotron X-ray nano-tomography Nikolas Grünwald,Pierre Lhuissier,Luc Salvo,Julie Villanova,Norbert H Menzleret al. Journal of Materials Science, 2020, 55 (27), pp.12725-12736. ⟨10.1007/s10853-020-04916-9⟩ Article dans une revue hal-02952496v1
Influence of manufacturing orientations on the morphology of alloy 718 single struts manufactured by selective laser melting Mathieu Suard,Ludovic Barrière,Pierre Lhuissier,Simon Perusin,Benoit Fillouxet al. Material Design & Processing Communications, 2020, 3, ⟨10.1002/mdp2.140⟩ Article dans une revue hal-03427104v1
Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites C. Mallmann,F. Hannard,E. Ferrie,A. Simar,R. Daudinet al. Materials Science and Engineering: A, 2019, 764, pp.138170. ⟨10.1016/j.msea.2019.138170⟩ Article dans une revue hal-02270678v1
Tracking pores during solidification of a Ni-based superalloy using 4D synchrotron microtomography Emeric Plancher,Pauline Gravier,Edouard Chauvet,Jean-Jacques Blandin,Elodie Bolleret al. Acta Materialia, 2019, 181, pp.1-9. ⟨10.1016/j.actamat.2019.09.040⟩ Article dans une revue hal-02402505v1
Towards behavior by design: A case study on corrugated architectures E. Plancher,L. Héraud,Pierre Lhuissier,R. Dendievel,D. Fabregueet al. Materials & Design, 2019, 166, pp.107604. ⟨10.1016/j.matdes.2019.107604⟩ Article dans une revue hal-02402520v1
Understanding the Interdependence of Penetration Depth and Deformation on Nanoindentation of Nanoporous Silver Yannick Champion,Mathilde Laurent-Brocq,Pierre Lhuissier,Frédéric Charlot,Alberto Moreira Jorge Junioret al. Metals, 2019, ⟨10.3390/met9121346⟩ Article dans une revue hal-02438774v1
In situ X-ray tomography densification of firn: The role of mechanics and diffusion processes Alexis Burr,Pierre Lhuissier,Armelle Philip,Christophe L. Martin Acta Materialia, 2019, 167, pp.210-220. ⟨10.1016/j.actamat.2019.01.053⟩ Article dans une revue hal-02067389v1
In situ nanotomography study of creep cavities in Al-3.6-Cu alloy R. Kumar,J. Villanova,Pierre Lhuissier,L. Salvo Acta Materialia, 2019, 166, pp.18-27. ⟨10.1016/j.actamat.2018.12.020⟩ Article dans une revue hal-02402541v1
Fast In Situ Nanotomography at ESRF Julie Villanova,Richi Kumar,Rémi Daudin,Pierre Lhuissier,David Jauffreset al. Microscopy and Microanalysis, 2018, 24 (S2), pp.450 - 451. ⟨10.1017/s1431927618014496⟩ Article dans une revue hal-01872651v1
4D Nano-Tomography for Fundamental Studies in Solidification of Aluminium-Based Alloys R. Daudin,J. Villanova,Pierre Lhuissier,S. Terzi,R. Kumaret al. Transactions of the Indian Institute of Metals, 2018, 71 (11), pp.2765-2769. ⟨10.1007/s12666-018-1409-6⟩ Article dans une revue hal-02402552v1
Solvent-free preparation of porous poly(l-lactide) microcarriers for cell culture Mirasbek Kuterbekov,Paul Machillot,Pierre Lhuissier,Catherine Picart,Alain Jonaset al. Acta Biomaterialia, 2018, 75, pp.300 - 311. ⟨10.1016/j.actbio.2018.06.009⟩ Article dans une revue hal-01913090v1
Modeling large viscoplastic strain in multi-material with the discrete element method Robin Gibaud,Etienne Guesnet,Pierre Lhuissier,Luc Salvo International Journal of Mechanical Sciences, 2018, 136, pp.349 - 359. ⟨10.1016/j.ijmecsci.2017.12.044⟩ Article dans une revue hal-01855713v1
Pore morphology of polar firn around closure revealed by X-ray tomography Alexis Burr,Clément Ballot,Pierre Lhuissier,Patricia Martinerie,Christophe L. Martinet al. The Cryosphere, 2018, 12 (7), pp.2481-2500. ⟨10.5194/tc-12-2481-2018⟩ Article dans une revue hal-01864373v1
Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography R. Daudin,S. Terzi,P. Lhuissier,J. Tamayo,M. Scheelet al. Acta Materialia, 2017, 125, pp.303 - 310. ⟨10.1016/j.actamat.2016.12.005⟩ Article dans une revue hal-01913108v1
Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science Julie Villanova,Rémi Daudin,Pierre Lhuissier,David Jauffres,Siyu Louet al. Materials Today, 2017, 20 (7), pp.354 - 359. ⟨10.1016/j.mattod.2017.06.001⟩ Article dans une revue hal-01678681v1
The Use of In Situ X-ray Imaging Methods in the Research and Development of Magnesium-Based Grain-Refined and Nanocomposite Materials W. H. Sillekens,D. Casari,W. U. Mirihanage,S. Terzi,R. Mathiesenet al. JOM Journal of the Minerals, Metals and Materials Society, 2016, 68 (12), pp.3042 - 3050. ⟨10.1007/s11837-016-2130-8⟩ Article dans une revue hal-01517212v1
Effect of packing characteristics on the discrete element simulation of elasticity and buckling Rishi Kumar,Sarshad Rommel,David Jauffrès,Pierre Lhuissier,Christophe L. Martin International Journal of Mechanical Sciences, 2016, 110, pp.14-21. ⟨10.1016/j.ijmecsci.2016.02.009⟩ Article dans une revue hal-01367851v1
Geometrical control of lattice structures produced by EBM through chemical etching: Investigations at the scale of individual struts Pierre Lhuissier,Charlotte de Formanoir,Guilhem Martin,Rémy Dendievel,Stéphane Godet Materials & Design, 2016, 110, pp.485 - 493. ⟨10.1016/j.matdes.2016.08.029⟩ Article dans une revue hal-01451275v1
Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel Fanny Mas,Guilhem Martin,Pierre Lhuissier,Yves Bréchet,Catherine Tassinet al. Materials Science and Engineering: A, 2016, 667, pp.156 - 170. ⟨10.1016/j.msea.2016.04.082⟩ Article dans une revue istex hal-01378839v1
Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting Mathieu Suard,Guilhem Martin,Pierre Lhuissier,Rémy Dendievel,Frédéric Vignatet al. Additive Manufacturing, 2015, 8, pp.124-131. ⟨10.1016/j.addma.2015.10.002⟩ Article dans une revue hal-01240214v1
Hydrodynamic coarsening in phase-separated silicate melts David Bouttes Bouttes,Océane Lambert,Corinne Claireaux Claireaux,William Woelffel,Davy Dalmaset al. Acta Materialia, 2015, 92, pp.233-242. ⟨10.1016/j.actamat.2015.03.045⟩ Article dans une revue hal-01184915v1
Remelting and solidification of a 6082 Al alloy containing submicron yttria particles: 4D experimental study by in situ X-ray microtomography R. Daudin,S. Terzi,P. Lhuissier,L. Salvo,E. Boller Materials & Design, 2015, 87, pp.313-317. ⟨10.1016/j.matdes.2015.07.141⟩ Article dans une revue istex hal-01263553v1
Structural properties of solid foams P. Lhuissier Comptes Rendus. Physique, 2014, 15 (8-9), pp.696-704. ⟨10.1016/j.crhy.2014.09.003⟩ Article dans une revue hal-01121268v1
Towards Stiffness Prediction of Cellular Structures Made by Electron Beam Melting (EBM) Mathieu Suard,P. Lhuissier,Rémy Dendievel,Jean-Jacques Blandin,Frédéric Vignatet al. Powder Metallurgy, 2014, pp.Advance Articles. ⟨10.1179/1743290114Y.0000000093⟩ Article dans une revue hal-00997282v1
Synchrotron X-ray imaging for crystal growth studies J. Baruchel,M. Di Michiel,T. Lafford,P. Lhuissier,J. Meyssonnieret al. Comptes Rendus. Physique, 2013, 14 (2-3), pp.208-220. ⟨10.1016/j.crhy.2012.10.010⟩ Article dans une revue hal-00925853v1
Continuous characterization by X-ray microtomography of damage during high-temperature deformation of magnesium alloy P. Lhuissier,M. Scheel,L. Salvo,M. Di Michiel,J.J. Blandin Scripta Materialia, 2013, 69 (1), pp.85-88. ⟨10.1016/j.scriptamat.2013.03.001⟩ Article dans une revue istex hal-00850238v1
Multifunctional optimization of random hollow sphere stackings. A. Fallet,P. Lhuissier,L. Salvo,C.L. Martin,A. Wiegmannet al. Scripta Materialia, 2012, 68 (1), pp.35-38. ⟨10.1016/j.scriptamat.2012.07.039⟩ Article dans une revue istex hal-00781323v1
Study of Thin Sandwich Beams With Steel Faces and Perforated Polymer Core in Bending Loading: Experiments and Simulations P. Lhuissier,J.P. Masse,L. Salvo,Y. Brechet Journal of Applied Mechanics-Transactions of the Asme, 2011, 78 (1), pp.5. ⟨10.1115/1.4002364⟩ Article dans une revue hal-00633976v1
Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading P. Lhuissier,L. Salvo,Y. Brechet Scripta Materialia, 2010, 63 (3), pp.277-280. ⟨10.1016/j.scriptamat.2010.04.010⟩ Article dans une revue istex hal-00517217v1
Quasistatic mechanical behaviour of stainless steel hollow sphere foam: Macroscopic properties and damage mechanisms followed by X-ray tomography. P. Lhuissier,A. Fallet,L. Salvo,Y. Brechet Materials Letters, 2009, 63 (13-14), pp.1113-1116. ⟨10.1016/j.matlet.2008.10.051⟩ Article dans une revue istex hal-00436510v1
Mechanical behaviour of metallic hollow spheres foam A. Fallet,P. Lhuissier,L. Salvo,Y. Bréchet Advanced Engineering Materials, 2008, 10, pp.858-862 Article dans une revue hal-00374960v1

Communication dans un congrès (37)

Défauts et plasticité des verres métalliques élaborés par fabrication additive R. Daudin,Camille Pauzon,Pierre Lhuissier,Jean Jacques Blandin,Muhammad Fakhry Hatta Métallurgie quel avenir !, Jun 2025, Toulouse, France Communication dans un congrès hal-05381095v1
Porosity control in Additively Manufactured metallic glass by laser rescanning studied with synchrotron X-ray Computed Tomography Camille Pauzon,Rémi Daudin,Pierre Lhuissier,Xavier Bataillon,Lucas Varotoet al. THERMEC2025, Jun 2025, Tours, France Communication dans un congrès hal-05344976v1
Heterogeneous plastic strain in an Al-Mn-Ni-Cu-Zr alloy Maxence Buttard,Bechir Chehab,Charles Josserond,Pierre Lhuissier,Julie Villanovaet al. 19th International Conference on Aluminium Alloys, 2024, Atlana, United States Communication dans un congrès hal-04885251v1
Necking and Fracture Strain Measurements in Plane Strain Tension to Understand the Effect of Impurities on 6XXX Alloys Pierre Guérin,Alexis Deschamps,Fanny Mas,Frédéric de Geuser,Pierre Lhuissieret al. ICAA19: 19th International Conference on Aluminum Alloys, Jun 2024, Atlanta, USA, United States Communication dans un congrès hal-04843207v1
Impact of higher Fe and Mn contents on 6XXX alloys for the automotive industry Pierre Guérin,Alexis Deschamps,Fanny Mas,Frédéric De Geuser,Pierre Lhuissieret al. FEMS EUROMAT 2023, Sep 2023, Frankfurt am Main, Germany Communication dans un congrès hal-04516115v1
A real-time monitoring of air drying of 3D cellulose printed parts by extrusion with fast lab X-ray microtomography Habib Murtaza,Camille Thibaut,Sabine Rolland Du Roscoat,Pierre Lhuissier,Luc Salvoet al. European Conference and Exhibition on Advanced Materials and Processes - EUROMAT 2019, Sep 2019, Stockholm, Sweden. ⟨10.1007/s10570-023-05290-w⟩ Communication dans un congrès hal-04126909v1
Influence of microstructure on mass loss caused by acoustic and hydrodynamic cavitation Julien Hofmann,Charles Thiébaut,Michel Riondet,Pierre Lhuissier,Sylvain Gaudionet al. 7th IICR workshop, Jun 2023, Chania (Crète), Greece Communication dans un congrès hal-04473785v1
3D grain mapping by laboratory X-ray diffraction contrast tomography implemented on a conventional tomography setup H Fang,R Granger,W Ludwig,Pierre Lhuissier 42ND Risø International Symposium on Materials Science, Sep 2022, Roskilde, France. pp.012039, ⟨10.1088/1757-899X/1249/1/012039⟩ Communication dans un congrès hal-03765727v1
3D histopathology speckle phase contrast imaging: from synchrotron to conventional sources Helene Labriet,David Paganin,Pierre Lhuissier,Luc Salvo,Sam Bayatet al. Physics of Medical Imaging, Feb 2019, San Diego, France. pp.63, ⟨10.1117/12.2511944⟩ Communication dans un congrès hal-02402533v1
Solvent-Free Preparation of Porous Poly(L-Lactide) Microcarriers for Cell Culture and Bone Tissue Engineering Mirasbek Kuterbekov,Paul Machillot,P. Lhuissier,Catherine Picart,A.M. Jonaset al. MRS Fall Meeting 2018, Nov 2018, Chicago, United States Communication dans un congrès hal-01981249v1
4D nano tomography for fundamental studies in solidification of Al based alloys Rémi Daudin,Julie Villanova,Remi Tucoulou,Richi Kumar,Pierre Lhuissieret al. The seventh International Conference on Solidification Science and Processing, Nov 2018, Thiruvananthapuram, India Communication dans un congrès hal-02438754v1
Observation par imagerie de rayons X à 10&lt;sup&gt;6&lt;/sup&gt; d'images par seconde de l'arc dans un fusible opérant sous décharge de condensateur Jean-Louis Gelet,Jean-Marc Chaix,Xavier Just,Pierre Lhuissier,Gérard Thomaset al. 13ème édition du Colloque sur les Arcs Electriques (CAE XIII) - 3ème Workshop Arcs et Contacts Electriques (ACE 2017), Institut Jean Lamour (UMR CNRS - Université de Lorraine), Mar 2017, Vandoeuvre-lès-Nancy, France Communication dans un congrès hal-01504879v1
Bone regeneration into 3D architectured and osteoinductive titanium implants Antalya Ho-Shui-Ling,Carole Fournier,Vincent Fitzpatrick,P. Lhuissier,C. Bidanet al. BIOMAT 2017, Jun 2017, Ambleteuse, France Communication dans un congrès hal-02016925v1
3D Modelling of thermoelectric effect during solidification under magnetic field of Al-Cu alloys Y. Duterrail,O Budenkova,R Tarpagkou,A. Gagnoud,L. Salvoet al. VII International Conference On Coupled Problems in Science and Engineering, Coupled problems 2017, Jun 2017, Rhodes Island, Greece Communication dans un congrès hal-01922540v1
Etude par radiographie ultrarapide des transformations et du rôle des matériaux lors du fonctionnement d’un fusible Xavier Just,Margie P. Olbinado,Pierre Lhuissier,Jean-Louis Gelet,Alexander Racket al. Journées Annuelles SF2M - JA 2017 "Matériaux, Microstructures et Fonctionnalités" , Section Sud-Est de la SF2M ; Laboratoire MATEIS de l’INSA de Lyon; Laboratoires CETHIL de l’INSA de Lyon; Membres de la fédération d’ingénierie Lyon Saint Etienne (Ingélyse); Membres de l’Institut Carnot I@L., Oct 2017, Lyon, France Communication dans un congrès hal-01538109v1
Observation of Arcing inside a Fuse under VSI Short Circuit Conditions using 5.10&lt;sup&gt;6&lt;/sup&gt; Frames per Sec. X-ray Imaging Jean-Louis Gelet,Jean-Marc Chaix,Xavier Just,Pierre Lhuissier,Gérard Thomaset al. COSYS-DC 2017 - International Conference on Components and SYStems for DC Grid, APIME, Mar 2017, Grenoble, France Communication dans un congrès hal-01505692v1
Effets des hétérogénéités de microstructure sur la rupture et la ténacité des céramiques poreuses David Jauffrès,Cedeño, Sebastian Pascual,Pierre Lhuissier,Christophe Martin CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03444616v1
Impact of EBM Fabrication Strategies on Geometry and Mechanical Properties of Titanium Cellular Structures Mathieu Suard,Pierre Lhuissier,Rémy Dendievel,Frédéric Vignat,Jean-Jacques Blandinet al. Direct Digital Manufacturing Conference 2014, Mar 2014, Berlin, Germany Communication dans un congrès hal-00997293v1
Damage developed during high temperature deformation of magnesium alloys: a continuous 3D characterisation by X-ray micro tomography P. Lhuissier,M. Scheel,L. Salvo,E. Boller,M. Di Michielet al. THERMEC 2013, Dec 2013, Las Vegas, France Communication dans un congrès hal-00950637v1
Règles de Conception pour la Fabrication Additive de Matériaux Cellulaires en Titane par &quot; Electron Beam Melting Mathieu Suard,Benjamin Vayre,Pierre Lhuissier,Rémy Dendievel,Frédéric Vignatet al. Poudre & Matériaux Frittés, May 2013, Belfort, France Communication dans un congrès hal-00997289v1
Design Rules for Additive Manufacturing of Titanium Cellular Structures by Electron Beam Melting Mathieu Suard,Rémy Dendievel,Benjamin Vayre,Pierre Lhuissier,Frédéric Vignatet al. EUROMAT 2013, Sep 2013, madrid, Spain Communication dans un congrès hal-00997287v1
Ultra-fast X-ray microtomography : a breakthrough in materials science L. Salvo,P. Lhuissier,M. Scheel,M. Di Michiel,J. Adrienet al. ESRF User Meeting, Feb 2012, GRENOBLE, France Communication dans un congrès hal-00801753v1
3D in situ imaging of Aluminium alloys during solidification L. Salvo,P. Lhuissier,M. Scheel,M. Di Michiel,E. Bolleret al. International Conference on Solidification Science and Processing, Nov 2012, Bhubaneswar, India Communication dans un congrès hal-00801750v1
Ultra fast in situ X-ray micro-tomography: application to solidification of aluminium alloys L. Salvo,M. Dimichiel,M. Scheel,P. Lhuissier,B. Mireuxet al. Thermec 2011, Pts 1-4, 2012, Russia. pp.1713-1718, ⟨10.4028/www.scientific.net/MSF.706-709.1713⟩ Communication dans un congrès hal-00824385v1
4D damage characterisation during superplastic deformation of magnesium alloys. P. Lhuissier,M. Scheel,L. Salvo,E. Boller,M. Di Michielet al. Intern. Conf. on Superplasticity of Advanced Materials (ICSAM), Jul 2012, ALBI, France Communication dans un congrès hal-00801732v1
High temperature deformation and damage in magnesium alloys. P. Lhuissier,L. Salvo,E. Boller,J.J. Blandin International Symposium on Plastic Deformation and Texture Analysis, Sep 2012, ALCOY, Spain Communication dans un congrès hal-00801741v1
Ultra-fast X-ray microtomography : a breakthrough in materials science L. Salvo,P. Lhuissier,M. Scheel,M. Di Michiel,J. Adrienet al. ICMMP International Conference on Metallic Materials and Processing, Jul 2012, BRISBANE, Australia Communication dans un congrès hal-00801747v1
Ultra-fast X-ray microtomography: a breakthrough in materials science L Salvo,P Lhuissier,M Scheel,M Di Michiel,J Adrienet al. ICMMP International Conference on Metallic Materials and Processing, 2012, Unknown, Unknown Region Communication dans un congrès hal-01538226v1
Ultra Fast Tomography: New Developments for 4D Studies in Material Science. P. Lhuissier,M. Scheel,M. Di Michiel,E. Boller,E. Maireet al. International Conference on 3D Materials Science 2012, Jul 2012, Seven Springs, United States Communication dans un congrès hal-00801739v1
Investigating performance variations of an optimized GPU-ported granulometry algorithm Vincent Boulos,Vincent Fristot,Dominique Houzet,Luc Salvo,P. Lhuissier DASIP 2012 - Conference on Design and Architectures for Signal and Image Processing, Oct 2012, Karlsruhe, Germany. pp.1-6 Communication dans un congrès hal-00787861v1
Sintered hollow spheres random stackings : mechanical properties and acoustic damping optimization A. Fallet,P. Lhuissier,L. Salvo,C.L. Martin,A. Wiegmannet al. CELLMET, Nov 2012, Dresde, Germany Communication dans un congrès hal-00801720v1
High temperature deformation and associated 3D characterisation of damage in magnesium alloys P. Lhuissier,A.V. Fernandez,L. Salvo,J.J. Blandin Thermec 2011, Pts 1-4, 2012, Russia. pp.1128-1133, ⟨10.4028/www.scientific.net/MSF.706-709.1128⟩ Communication dans un congrès hal-00824387v1
3D characterisation of damage during high temperature deformation of magnesium alloys. P. Lhuissier,A. Villanueva Fernandez,L. Salvo,J.J. Blandin THERMEC 2011, Aug 2011, Québec, Canada Communication dans un congrès hal-00697664v1
Ultra fast in situ X-ray micro-tomography : application to solidification of aluminium alloys. L. Salvo,M. Dimichiel,M. Scheel,P. Lhuissier,B. Mireuxet al. THERMEC 2011, Aug 2011, Québec,, Canada Communication dans un congrès hal-00697673v1
Optimisation of Structures With Metallic Hollow Spheres Foam Core P. Lhuissier,L. Salvo,Y. Brechet,M. Fivel 5th conference on porous metal and metallic foams Sept. 2007 Montreal, 2007, France. a paraitre Communication dans un congrès hal-00203541v1
Constitutive equation for the compression of metallic hollow spheres foam P. Lhuissier,Y. Brechet,M. Fivel,L. Salvo Met foam conference, 2007, France. a paraitre Communication dans un congrès hal-00218139v1
Empilement aléatoire de spheres creuses d'acier: comportement et modélisation P. Lhuissier,L. Salvo,Y. Bréchet,M. Fivel MetFoam 2007, 2007, Montreal, Canada Communication dans un congrès hal-00196776v1

Poster de conférence (1)

A fibrous cellulose water based paste: characterization during drying of 3D printing parts produced by extrusion Camille Thibaut,Habib Murtaza,Aurore Denneulin,Sabine Rolland Du Roscoat,Pierre Lhuissieret al. 7th International Conference on Biobased and Biodegradable Polymers - BIOPOL 2019, Jun 2019, Stockolm, Sweden Poster de conférence hal-04129808v1