Pierre-Olivier Bouchard

Présentation

Publications

Article dans une revue (91)

Numerical simulation of the delamination behavior of photovoltaic modules Vincent Meslier,Bertrand Chambion,Jean-Luc Bouvard,Pierre-Olivier Bouchard Solar Energy, 2025, 300, pp.113792. ⟨10.1016/j.solener.2025.113792⟩ Article dans une revue hal-05442249v1
Assessment of tool kinematics, mass scaling effects, and similarity theory in metal spinning simulation Akla-Essoh Claude Korolakina,Pierre-Olivier Bouchard,Katia Mocellin,Sjoerd van Der Veen,Anne Lepied Journal of Manufacturing Processes, 2025, 151, pp.234-250. ⟨10.1016/j.jmapro.2025.06.069⟩ Article dans une revue hal-05387853v1
Microstructural Evolution in Inconel 718 During Room-Temperature Tube Flow Forming: Plastic Flow Heterogeneities and δ Phase Evolution Charbel Moussa,Emile Hazemann,Camille Srecki,Alexandre Thealler,Katia Mocellinet al. Metallurgical and Materials Transactions A, 2024, 55 (5), pp.1311-1318. ⟨10.1007/s11661-024-07361-4⟩ Article dans une revue hal-04610061v1
Relevance of Symmetry Assumptions in the 3D Numerical Modeling of a Flowformability Test Nagasai Meghana Rani Kauta,Pierre-Olivier Bouchard,Katia Mocellin Key Engineering Materials, 2022, 926, pp.776-783. ⟨10.4028/p-07aps3⟩ Article dans une revue hal-03818746v1
3D crack initiation and propagation applied to metal forming processes Hazem Eldahshan,Daniel Pino Munoz,José Alves,Etienne Perchat,Pierre-Olivier Bouchard International Journal of Material Forming, 2022, 15 (5), pp.60. ⟨10.1007/s12289-022-01702-7⟩ Article dans une revue hal-03901781v1
Influence of mechanical characterization on the prediction of necking issues during sheet flow forming process Ahmed Mehdi Roula,Katia Mocellin,Heinrich Traphöner,A. Erman Tekkaya,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2022, 306, pp.117620. ⟨10.1016/j.jmatprotec.2022.117620⟩ Article dans une revue hal-03997498v1
An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging Victor-Manuel Trejo-Navas,Ante Buljac,François Hild,Thilo F. Morgeneyer,Marc Bernackiet al. Journal of Theoretical, Computational and Applied Mechanics, 2022, pp.1-18. ⟨10.46298/jtcam.7501⟩ Article dans une revue hal-03626799v1
Elastoplastic Characterization of Zn-Cu-Ti Alloy Sheets: Experiments, Modeling, and Simulation Francisco Alister,Diego Celentano,Emanuel Nicoletti,Javier Signorelli,Pierre-Olivier Bouchardet al. Journal of Materials Engineering and Performance, 2022, 31 (2), pp.1512-1529. ⟨10.1007/s11665-021-06226-w⟩ Article dans une revue hal-03869709v1
CIPFAR: A 3D unified numerical framework for the modeling of ductile fracture based on the phase field model and adaptive remeshing Hazem Eldahshan,José Alves,Pierre-Olivier Bouchard,Etienne Perchat,Daniel Pino Munoz Computer Methods in Applied Mechanics and Engineering, 2021, 387, pp.114171. ⟨10.1016/j.cma.2021.114171⟩ Article dans une revue hal-03472614v1
3-D Modeling of Thermal Exchange in the PV Module During Lamination: Impact of Architecture, Laminator Configuration, and Lamination Recipe Pierre-Olivier Bouchard,Ichrak Rahmoun,Tristan Le Carre,Bertrand Chambion,Eeva Mofakhamiet al. IEEE Journal of Photovoltaics, 2021, 12 (1), pp.107-113. ⟨10.1109/JPHOTOV.2021.3111510⟩ Article dans une revue hal-03472603v1
Ductile failure prediction of pipe-ring notched AISI 316L using uncoupled ductile failure criteria C. Bianchetti,Daniel Pino Muñoz,B. Leblé,Pierre-Olivier Bouchard International Journal of Pressure Vessels and Piping, 2021, 191, pp.104333. ⟨10.1016/j.ijpvp.2021.104333⟩ Article dans une revue hal-03472587v1
A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materials Yoan Boussès,Nathalie Brulat-Bouchard,Pierre-Olivier Bouchard,Yannick Tillier Dental Materials, 2021, ⟨10.1016/j.dental.2021.01.010⟩ Article dans une revue hal-03174651v1
Phase field modeling of ductile fracture at large plastic strains using adaptive isotropic remeshing Hazem Eldahshan,Pierre-Olivier Bouchard,José Alves,Etienne Perchat,Daniel Pino Muñoz Computational Mechanics, 2021, 67 (3), pp.763-783. ⟨10.1007/s00466-020-01962-7⟩ Article dans une revue hal-03472563v1
Diurnal temperature variation as the source of the preferential direction of fractures on asteroids: Theoretical model for the case of Bennu Pierre-Olivier Bouchard,D. Uribe-Suárez,M. Delbo,D. Pino-Muñoz Icarus, 2021, 360, pp.114347. ⟨10.1016/j.icarus.2021.114347⟩ Article dans une revue hal-03472585v1
Damage in metal forming A.E. Tekkaya,Pierre-Olivier Bouchard,S. Bruschi,C.C. Tasan CIRP Annals - Manufacturing Technology, 2020, 69 (2), pp.600-623. ⟨10.1016/j.cirp.2020.05.005⟩ Article dans une revue hal-03099345v1
Impact of strain rate sensitivity on the identification of the material parameters scattering and on the formability of zinc sheet M. Milesi,J. Lecoq,C. Pradille,L. Vitu,N. Boudeauet al. International Journal of Material Forming, 2020, 13 (2), pp.203-218. ⟨10.1007/s12289-019-01479-2⟩ Article dans une revue hal-02557876v1
Self-heating of rolled ZnCuTi sheets M Milesi,D Pino Muñoz,A Lagroum,C Pradille,Pierre-Olivier Bouchard Sadhana, 2020, 45 (1), ⟨10.1007/s12046-020-01426-x⟩ Article dans une revue hal-03099348v1
Numerical modeling of crack propagation with dynamic insertion of cohesive elements D. Uribe-Suárez,Pierre-Olivier Bouchard,M. Delbò,D. Pino-Muñoz Engineering Fracture Mechanics, 2020, 227, pp.106918. ⟨10.1016/j.engfracmech.2020.106918⟩ Article dans une revue hal-03099324v1
An efficient parallel global optimization strategy based on Kriging properties suitable for material parameters identification Émile Roux,Yannick Tillier,Salim Kraria,Pierre-Olivier Bouchard Archive of Mechanical Engineering, 2020, 67 (2), pp.169. ⟨10.24425/ame.2020.131689⟩ Article dans une revue hal-02624246v1
Self-heating of rolled ZnCuTi sheets Pierre-Olivier Bouchard,Marc Milesi,Daniel Pino Muñoz,Amine Lagroum,Christophe Pradille Sadhana, 2020 Article dans une revue hal-03472579v1
Computational methods for ductile fracture modeling at the microscale Modesar Shakoor,Victor-Manuel Trejo-Navas,Daniel Pino Muñoz,Marc Bernacki,Pierre-Olivier Bouchard Archives of Computational Methods in Engineering, 2019, ⟨10.1007/s11831-018-9276-1⟩ Article dans une revue hal-01870941v1
A comparative study of image segmentation methods for micromechanical simulations of ductile damage Victor-Manuel Trejo-Navas,Ante F Buljac,François Hild,Thilo F. Morgeneyer,Lukas Helfenet al. Computational Materials Science, 2019, 159, pp.43-65. ⟨10.1016/j.commatsci.2018.11.039⟩ Article dans une revue hal-01950835v1
Characterization of the Elastoplastic Response of Low Zn-Cu-Ti Alloy Sheets Using the CPB-06 Criterion Francisco Alister,Diego Celentano,Javier Signorelli,Pierre-Olivier Bouchard,Daniel Pino Muñozet al. Materials, 2019, 12 (19), pp.3072. ⟨10.3390/ma12193072⟩ Article dans une revue hal-02429581v1
Theoretical prediction of dental composites yield stress and flexural modulus based on filler volume ratio Yoan Boussès,Nathalie Brulat-Bouchard,Pierre-Olivier Bouchard,Hazem Abouelleil,Yannick Tillier Dental Materials, 2019, ⟨10.1016/j.dental.2019.10.012⟩ Article dans une revue hal-02374278v1
On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage Ante F Buljac,Victor-Manuel Trejo-Navas,Modesar Shakoor,Amine Bouterf,Jan Neggerset al. European Journal of Mechanics - A/Solids, 2018, 72, pp.287-297. ⟨10.1016/j.euromechsol.2018.04.010⟩ Article dans une revue hal-01767392v1
Ductile fracture of a metal matrix composite studied using 3D numerical modeling of void nucleation and coalescence Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard Engineering Fracture Mechanics, 2018, 189, pp.110-132. ⟨10.1016/j.engfracmech.2017.10.027⟩ Article dans une revue hal-01629229v1
Void growth and coalescence in a three-dimensional non-periodic void cluster Victor-Manuel Trejo-Navas,Marc Bernacki,Pierre-Olivier Bouchard International Journal of Solids and Structures, 2018, 139–140, pp.65-78. ⟨10.1016/j.ijsolstr.2018.01.024⟩ Article dans une revue hal-01731413v1
A novel monolithic Lagrangian approach for modelling crack propagation using anisotropic mesh adaptation Karim Hitti,Stephanie Feghali,Faten Rafeh,Marc Bernacki,Pierre-Olivier Bouchard International Journal of Advances in Applied Mathematics and Mechanics, 2018, 5 (3), pp.53-65 Article dans une revue hal-01731909v1
Recent advances in the finite element modelling of ductile fracture at mesoscale Pierre-Olivier Bouchard,Victor-Manuel Trejo-Navas,Modesar Shakoor,Thilo F. Morgeneyer,Ante Buljacet al. Procedia Manufacturing, 2018, 15, pp.39-45. ⟨10.1016/j.promfg.2018.07.167⟩ Article dans une revue hal-01858266v1
Influence of Lode angle on modelling of void closure in hot metal forming processes Abdelouahed Chbihi,Pierre-Olivier Bouchard,Marc Bernacki,Daniel Pino Muñoz Finite Elements in Analysis and Design, 2017, 126, pp.13 - 25. ⟨10.1016/j.finel.2016.11.008⟩ Article dans une revue hal-01424267v1
Analysis and modeling of the failure behavior of carbonitrided parts Cyprien Karolak,Pierre Montmitonnet,David Moore Parks,Guillaume Delattre,Pierre-Olivier Bouchard Procedia Engineering, 2017, Part of special issue: International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom, 207, pp.2030 - 2035. ⟨10.1016/j.proeng.2017.10.1103⟩ Article dans une revue hal-01668558v1
An adaptive Level-Set Method with enhanced volume conservation for simulations in multiphase domains Modesar Shakoor,Pierre-Olivier Bouchard,Marc Bernacki International Journal for Numerical Methods in Engineering, 2017, 109 (4), pp.555-576. ⟨10.1002/nme.5297⟩ Article dans une revue hal-01327907v1
Accounting for material parameters scattering in rolled zinc formability Marc Milesi,Roland E. Logé,Daniel Pino Muñoz,Yann Jansen,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2017, 245, pp.134 - 148. ⟨10.1016/j.jmatprotec.2017.02.021⟩ Article dans une revue hal-01497273v1
Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging Ante Buljac,Modesar Shakoor,Jan Neggers,Marc Bernacki,Pierre-Olivier Bouchardet al. Computational Mechanics, 2017, 59 (3), pp.419-441. ⟨10.1007/s00466-016-1357-0⟩ Article dans une revue hal-01480980v1
On the choice of boundary conditions for micromechanical simulations based on 3D imaging Modesar Shakoor,Ante Buljac,Jan Neggers,François Hild,Thilo F. Morgeneyeret al. International Journal of Solids and Structures, 2017, 112, pp.83-96. ⟨10.1016/j.ijsolstr.2017.02.018⟩ Article dans une revue hal-01471645v1
Improved fracture criterion to chain forming stage and in use mechanical strength computations of metallic parts – Application to half-blanked components Jean-Marie Gachet,Guillaume Delattre,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2015, 216, pp.260-277. ⟨10.1016/j.jmatprotec.2014.09.006⟩ Article dans une revue istex hal-01089165v1
Recent and future developments in finite element metal forming simulation Stéphane Andrietti,Jean-Loup Chenot,Marc Bernacki,Pierre-Olivier Bouchard,Lionel Fourmentet al. Computer Methods in Materials Science, 2015, 15, pp.265-293 Article dans une revue hal-01247658v1
Void closure criteria for hot metal forming: A review Michel Saby,Pierre-Olivier Bouchard,Marc Bernacki Journal of Manufacturing Processes, 2015, 19, pp.239-250. ⟨10.1016/j.jmapro.2014.05.006⟩ Article dans une revue hal-01022635v1
A new body-fitted immersed volume method for the modeling of ductile fracture at the microscale: Analysis of void clusters and stress state effects on coalescence Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard Engineering Fracture Mechanics, 2015, 147, pp.398-417. ⟨10.1016/j.engfracmech.2015.06.057⟩ Article dans une revue hal-01181257v1
A geometry-dependent model for void closure in hot metal forming Michel Saby,Pierre-Olivier Bouchard,Marc Bernacki Finite Elements in Analysis and Design, 2015, 105, pp.63-78. ⟨10.1016/j.finel.2015.07.003⟩ Article dans une revue hal-01184923v1
Modéliser la mise en forme des matériaux Marc Bernacki,Pierre-Olivier Bouchard Industrie & Technologies, 2015, 977-978, pp.57-67 Article dans une revue hal-01247724v1
Qualification of bumping processes: Experimental and numerical investigations on mechanical stress and failure modes induced by shear test Sébastien Gallois-Garreignot,Naceur Benzima,Etienne Benmussa,Caroline Moutin,Pierre-Olivier Bouchardet al. Microelectronics Reliability, 2015, 55 (6), pp.980-989. ⟨10.1016/j.microrel.2015.03.008⟩ Article dans une revue hal-01143756v1
Room temperature thin foil SLIM-cut using an epoxy paste: experimental versus theoretical results Pierre Bellanger,Pierre-Olivier Bouchard,Marc Bernacki,Joao Serra Materials Research Express, 2015, 2 (4), pp.046203. ⟨10.1088/2053-1591/2/4/046203⟩ Article dans une revue hal-01247646v1
An efficient and parallel level set reinitialization method - Application to micromechanics and microstructural evolutions Modesar Shakoor,Benjamin Scholtes,Pierre-Olivier Bouchard,Marc Bernacki Applied Mathematical Modelling, 2015, 39 (23-24), pp.7291-7302. ⟨10.1016/j.apm.2015.03.014⟩ Article dans une revue hal-01139858v1
Comparison of reduction ability between multi-stage cold drawing and rolling of stainless steel wire – Experimental and numerical investigations of damage Trong-Son Cao,Christophe Vachey,Pierre Montmitonnet,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2015, 217, pp.30-47. ⟨10.1016/j.jmatprotec.2014.10.020⟩ Article dans une revue istex hal-01090160v1
A comparative study of three ductile damage approaches for fracture prediction in cold forming processes Trong-Son Cao,Christian Bobadilla,Pierre Montmitonnet,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2015, 216, pp.385-404. ⟨10.1016/j.jmatprotec.2014.10.009⟩ Article dans une revue istex hal-01090138v1
New finite element developments for the full field modeling of microstructural evolutions using the level-set method Benjamin Scholtes,Modesar Shakoor,Amico Settefrati,Pierre-Olivier Bouchard,Nathalie Bozzoloet al. Computational Materials Science, 2015, 109, pp.388-398. ⟨10.1016/j.commatsci.2015.07.042⟩ Article dans une revue istex hal-01203060v1
Investigations of Thermomechanical Stress Induced by TSV-Middle (Through-Silicon via) in 3-D ICs by Means of CMOS Sensors and Finite-Element Method Komi Atchou Ewuame,Vincent Fiori,Karim Inal,Pierre-Olivier Bouchard,Sebastien Gallois-Garreignotet al. IEEE Transactions on Components, Packaging and Manufacturing Technology. Part A, Manufacturing Technology, 2015, 5 (8), pp.1085-1092 - Article number 7164297. ⟨10.1109/TCPMT.2015.2445099⟩ Article dans une revue hal-01221158v1
On the interest of using full field measurements in ductile damage model calibration Emile Roux,Pierre-Olivier Bouchard International Journal of Solids and Structures, 2015, 72, pp.50-62. ⟨10.1016/j.ijsolstr.2015.07.011⟩ Article dans une revue hal-01183968v1
A Lode-dependent enhanced Lemaitre model for ductile fracture prediction at low stress triaxiality Trong-Son Cao,Jean-Marie Gachet,Pierre Montmitonnet,Pierre-Olivier Bouchard Engineering Fracture Mechanics, 2014, 124-125, pp.80-96. ⟨10.1016/j.engfracmech.2014.03.021⟩ Article dans une revue istex hal-00987142v1
A new finite element approach for modelling ductile damage void nucleation and growth—analysis of loading path effect on damage mechanisms Emile Roux,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard Modelling and Simulation in Materials Science and Engineering, 2014, 22 (7), pp.Article 075001. ⟨10.1088/0965-0393/22/7/075001⟩ Article dans une revue hal-01090403v1
Fracture mechanisms under monotonic and non-monotonic low Lode angle loading Jean-Marie Gachet,Guillaume Delattre,Pierre-Olivier Bouchard Engineering Fracture Mechanics, 2014, 124-125, pp.121-141. ⟨10.1016/j.engfracmech.2014.04.009⟩ Article dans une revue istex hal-01023769v1
Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model Trong-Son Cao,Éric Maire,Catherine Verdu,Christian Bobadilla,Patrice Lasneet al. Computational Materials Science, 2014, 84, pp.175 - 187. ⟨10.1016/j.commatsci.2013.12.006⟩ Article dans une revue istex hal-00944805v1
Room temperature kerfless silicon thin foils obtained via a stress inducing epoxy layer João Serra,Pierre Bellanger,Pierre-Olivier Bouchard,Marc Bernacki Physica Status Solidi C: Current Topics in Solid State Physics, 2014, 11 (11-12), pp.1644-1647. ⟨10.1002/pssc.201400105⟩ Article dans une revue istex hal-01110435v1
Analysis of stress intensity factors and T-stress to control crack propagation for kerf-less spalling of single crystal silicon foils Pierre-Olivier Bouchard,Marc Bernacki,David M. Parks Computational Materials Science, 2013, 69, pp.243-250. ⟨10.1016/j.commatsci.2012.10.033⟩ Article dans une revue hal-00780913v1
Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel Marie-Cécile Robin,Denis Delagnes,Roland E. Logé,Pierre-Olivier Bouchard,Stéphanie da Costaet al. International Journal of Fatigue, 2013, 54, pp.84 - 98. ⟨10.1016/j.ijfatigue.2013.04.004⟩ Article dans une revue istex hal-01398870v1
A detailed description of the Gurson-Tvergaard-Needleman model within a mixed velocity-pressure finite element formulation Trong-Son Cao,Pierre Montmitonnet,Pierre-Olivier Bouchard International Journal for Numerical Methods in Engineering, 2013, 96 (9), pp.561-583. ⟨10.1002/nme.4571⟩ Article dans une revue istex hal-00879535v1
Kriging metamodel global optimization of clinching joining processes accounting for ductile damage Emile Roux,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2013, 213 (7), pp.1038-1047. ⟨10.1016/j.jmatprotec.2013.01.018⟩ Article dans une revue istex hal-00805670v1
Thermo-mechanical and fracture properties in single-crystal silicon Alex Masolin,Pierre-Olivier Bouchard,Roberto Martini,Marc Bernacki Journal of Materials Science, 2013, 48 (3), pp.979-988. ⟨10.1007/s10853-012-6713-7⟩ Article dans une revue istex hal-00720597v1
Efficient numerical integration of an elastic-plastic damage law within a mixed velocity-pressure formulation Rachid El Khaoulani,Pierre-Olivier Bouchard Mathematics and Computers in Simulation, 2013, 94, pp.145-158. ⟨10.1016/j.matcom.2013.06.004⟩ Article dans une revue istex hal-00845444v1
On the Development and Identification of Phenomenological Damage Models - Application to Industrial Wire Drawing and Rolling Processes Trong-Son Cao,Christian Bobadilla,Pierre Montmitonnet,Pierre-Olivier Bouchard Key Engineering Materials, 2013, 554 - 557, pp.213-226. ⟨10.4028/www.scientific.net/KEM.554-557.213⟩ Article dans une revue hal-00847739v1
Identification methodology and comparison of phenomenological ductile damage models via hybrid numerical-experimental analysis of fracture experiments conducted on a zirconium alloy Trong-Son Cao,Alexis Gaillac,Pierre Montmitonnet,Pierre-Olivier Bouchard International Journal of Solids and Structures, 2013, 50 (24), pp.3984-3999. ⟨10.1016/j.ijsolstr.2013.08.011⟩ Article dans une revue hal-00861363v1
A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain Emile Roux,Marc Bernacki,Pierre-Olivier Bouchard Computational Materials Science, 2013, 68, pp.32-46. ⟨10.1016/j.commatsci.2012.10.004⟩ Article dans une revue istex hal-00756435v1
Identification of glass pad lubricant viscosity using a trapping thermomechanical test Pierre-Olivier Bouchard,Guillaume Lebret,Elie Hachem Journal of Materials Processing Technology, 2013, 213 (3), pp.392-400. ⟨10.1016/j.jmatprotec.2012.10.002⟩ Article dans une revue istex hal-00749433v1
Efficient numerical integration of an elastic–plastic damage law within a mixed velocity–pressure formulation R. El Khaoulani,Pierre-Olivier Bouchard Mathematics and Computers in Simulation, 2013, 94, pp.145-158. ⟨10.1016/j.matcom.2013.06.004⟩ Article dans une revue istex hal-03605099v1
Three-dimensional analysis of real void closure at the meso-scale during hot metal forming processes Michel Saby,Marc Bernacki,Emile Roux,Pierre-Olivier Bouchard Computational Materials Science, 2013, 77, pp.194-201. ⟨10.1016/j.commatsci.2013.05.002⟩ Article dans une revue hal-00831553v1
Comparison of stress distribution in the temporomandibular joint during jaw closing before and after symphyseal distraction: a finite element study Charles Savoldelli,Pierre-Olivier Bouchard,Armelle Maniere-Ezvan,Georges V. Bettega,Yannick Tillier International Journal of Oral and Maxillofacial Surgery, 2012, 41 (12), pp.1474-1482. ⟨10.1016/j.ijom.2012.06.005⟩ Article dans une revue istex hal-00719322v1
Stress distribution in the temporo-mandibular joint discs during jaw closing: a high-resolution three-dimensional finite-element model analysis Charles Savoldelli,Pierre-Olivier Bouchard,Raounak Loudad,Patrick Baqué,Yannick Tillier Surgical and Radiologic Anatomy, 2012, 34 (5), pp.405-413. ⟨10.1007/s00276-011-0917-4⟩ Article dans une revue istex hal-00654635v1
An anisotropic mesh adaptation strategy for damage and failure in ductile materials Rachid El Khaoulani,Pierre-Olivier Bouchard Finite Elements in Analysis and Design, 2012, 59, pp.1-10. ⟨10.1016/j.finel.2012.04.006⟩ Article dans une revue istex hal-00702193v1
An enhanced Lemaitre model formulation for materials processing damage computation Pierre-Olivier Bouchard,Ludovic Bourgeon,Sébastien Fayolle,Katia Mocellin International Journal of Material Forming, 2011, 4 (3), pp.299-315. ⟨10.1007/s12289-010-0996-5⟩ Article dans une revue hal-00521625v1
Approche multi-échelles pour l'étude de l'anisotropie induite par le forgeage en fatigue à grand nombre de cycles = A multiscale finite element approach to deal with high cycle fatigue anisotropy induced by forging Pierre-Olivier Bouchard,Marc Milesi,Yvan Chastel Revue de Métallurgie, 2011, 107 (9), pp.353 - 361. ⟨10.1051/metal/2010114⟩ Article dans une revue istex hal-00574285v1
Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior Marc Milesi,Pierre-Olivier Bouchard,Pierre-Henri Cornuault,Yvan Chastel,Marc Bernackiet al. Computational Materials Science, 2011, 50 (10), pp.2836-2847. ⟨10.1016/j.commatsci.2011.04.039⟩ Article dans une revue hal-00648385v1
A multi-scale approach for high cycle anisotropic fatigue resistance: Application to forged components Marc Milesi,Yvan Chastel,Elie Hachem,Marc Bernacki,Roland E. Logéet al. Materials Science and Engineering: A, 2010, 527 (18-19), pp.Pages 4654-4663. ⟨10.1016/j.msea.2010.03.042⟩ Article dans une revue hal-00509726v1
Determining the initial viscosity of 4 dentinal adhesives. Relationship with their penetration into tubuli Eric Leforestier,Evelyne Darque-Ceretti,Christian Peiti,Pierre-Olivier Bouchard,Marc Bolla International Journal of Adhesion and Adhesives, 2010, 30 (6), pp.Pages 393-402. ⟨10.1016/j.ijadhadh.2010.02.003⟩ Article dans une revue istex hal-00509741v1
An Experimental and Numerical Study of Ductile Damage for Cold Metal Forming Applications Pierre-Olivier Bouchard,S. Fatini,M. Mai Civil-Comp Proceedings, 2010, 93, Paper 293 Article dans une revue hal-00960165v1
Determination of Young's modulus of mandibular bone using inverse analysis Guillaume Odin,Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier Medical Engineering & Physics, 2010, 32 (6), pp.Pages 630-637. ⟨10.1016/j.medengphy.2010.03.009⟩ Article dans une revue hal-00509752v1
Apport de la méthode des éléments finis en chirurgie maxillofaciale = Contribution of the finite element method in maxillofacial surgery Charles Savoldelli,Yannick Tillier,Pierre-Olivier Bouchard,Guillaume Odin Revue de Stomatologie et de Chirurgie Maxillo-Faciale, 2009, 110 (1), pp.Pages 27-33. ⟨10.1016/j.stomax.2008.10.001⟩ Article dans une revue hal-00509255v1
Development and validation of a 3D computational tool to describe concrete behaviour at mesoscale. Application to the alkali-silica reaction Isabelle Comby-Peyrot,Fabrice Bernard,Pierre-Olivier Bouchard,François Bay,Eric Garcia-Diaz Computational Materials Science, 2009, 46 (4), pp.1163-1177. ⟨10.1016/j.commatsci.2009.06.002⟩ Article dans une revue istex hal-00508403v1
Determination of plastic properties of metals by instrumented indentation using a stochastic optimization algorithm Isabelle Peyrot,Pierre-Olivier Bouchard,Rudy Ghisleni,Johann Michler Journal of Materials Research, 2009, 24 (3), pp.Pages 936-947. ⟨10.1557/JMR.2009.0118⟩ Article dans une revue istex hal-00509252v1
Plastic instabilities analysis during T-shaped tubes hydro-forming process Denis Sornin,Sébastien Fayolle,Pierre-Olivier Bouchard,Elisabeth Massoni International Journal of Material Forming, 2009, 2 (2), pp.Pages 131-144. ⟨10.1007/s12289-009-0399-7⟩ Article dans une revue hal-00509261v1
Vers une optimisation de la tenue à la fatigue de pièces forgées intégrant l'histoire mécanique des matériaux Pierre-Olivier Bouchard,Nicolas Caillet,Yvan Chastel Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2008, 17 (3), pp.Pages 283-301. ⟨10.3166/remn.17.283-301⟩ Article dans une revue hal-00521594v1
Intégration de la phase de mise en oeuvre dans le dimensionnement des pièces industrielles forgées Pierre-Olivier Bouchard La Forge, 2008, 32, pp.Pages 14-18 Article dans une revue hal-00834099v1
On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels Pierre-Olivier Bouchard,Ludovic Bourgeon,H. Lachapèle,Éric Maire,Catherine Verduet al. Materials Science and Engineering: A, 2008, 496 (1-2), pp.Pages 223-233. ⟨10.1016/j.msea.2008.05.033⟩ Article dans une revue hal-00521992v1
Numerical modeling of self-pierce riveting--From riveting process modeling down to structural analysis Pierre-Olivier Bouchard,Laurent Thomas,Laurent Tollier Journal of Materials Processing Technology, 2008, 202 (1-3), pp.Pages 290-300. ⟨10.1016/j.jmatprotec.2007.08.077⟩ Article dans une revue istex hal-00834966v1
Explicit microscopic fatigue analysis of forged components Marc Milesi,Yvan Chastel,Marc Bernacki,Roland E. Logé,Pierre-Olivier Bouchard Computer Methods in Materials Science, 2007, 7 (4), pp.383-388 Article dans une revue hal-00521874v1
Numerical aspects of a problem with damage to simulate mechanical behavior of a quasi-brittle material Isabelle Comby Peyrot,Pierre-Olivier Bouchard,François Bay,Fabrice Bernard,Eric Garcia-Diaz Computational Materials Science, 2007, 40 (3), pp.327-340. ⟨10.1016/j.commatsci.2007.01.018⟩ Article dans une revue istex hal-00612930v1
Quantitative analysis of the impact of forging operations on fatigue properties of steel components Yvan Chastel,Nicolas Caillet,Pierre-Olivier Bouchard Journal of Materials Processing Technology, 2006, 177 (1-3), pp.Pages 202-205. ⟨10.1016/j.jmatprotec.2006.04.114⟩ Article dans une revue istex hal-00512792v1
Mechanical behaviour of iron oxide scale: Experimental and numerical study Benjamin Bicqué,Pierre-Olivier Bouchard,Pierre Montmitonnet,Martine Picard Wear, 2006, 260 (3), pp.Pages 231-242. ⟨10.1016/j.wear.2005.03.037⟩ Article dans une revue hal-00514111v1
Numerical modelling of crack propagation: Automatic remeshing and comparison of different criteria Pierre-Olivier Bouchard,François Bay,Yvan Chastel Computer Methods in Applied Mechanics and Engineering, 2003, 192 (35-36), pp.Pages 3887-3908. ⟨10.1016/S0045-7825(03)00391-8⟩ Article dans une revue istex hal-00677710v1
Crack propagation modelling using an advanced remeshing technique Pierre-Olivier Bouchard,François Bay,Yvan Chastel,Isabelle Tovena Computer Methods in Applied Mechanics and Engineering, 2000, 189 (3), pp.Pages 723-742. ⟨10.1016/S0045-7825(99)00324-2⟩ Article dans une revue istex hal-00677709v1
Numerical and experimental analyses of a fracture mechanics test for adhesively bonded joints François Bay,Pierre-Olivier Bouchard,Evelyne Darque-Ceretti,Eric Felder,Sandra Scotto-Sherrif Journal of Adhesion Science and Technology, 1999, 13 (8), pp.Pages 931-957. ⟨10.1163/156856199X00758⟩ Article dans une revue hal-00613100v1

Communication dans un congrès (112)

Évolution de la microstructure lors du fluotournage d'Inconel 718 et d'alliage d'aluminium 2219 Charbel Moussa,Emile Hazemann,Camille Srecki,Alexandre Thealler,Pierre-Olivier Bouchardet al. La métallurgie, quel avenir !, Jun 2025, Toulouse, France Communication dans un congrès hal-05406188v1
Caractérisation du comportement en rupture de la pile d'éponge de Zr en fonction de sa microstructure P. Guerrin,Pauline Hahn,C. Levard,A. Barron,Guillaume Corvecet al. La métallurgie, quel avenir !, Jun 2025, Toulouse, France Communication dans un congrès hal-05406564v1
On the Relevance of Modeling Options in ABAQUS Regarding the Spinning Process Simulation Akla-Essoh Claude Korolakina,Pierre-Olivier Bouchard,Katia Mocellin,Ahmed Mehdi Roula,Anne Lepiedet al. ICTP 2023, Sep 2023, Mandelieu La Napoule, France. pp.667-679, ⟨10.1007/978-3-031-41023-9_67⟩ Communication dans un congrès hal-04379919v1
A phase-field numerical framework to study ductile damage to fracture transition: An application to material forming processes Daniel Pino Muñoz,Pierre-Olivier Bouchard Material Forming, 2023, Krakow (Cracovie), Poland. pp.1603-1610, ⟨10.21741/9781644902479-173⟩ Communication dans un congrès hal-04510558v1
Procédés de mise en forme à grandes déformations plastiques cumulées Katia Mocellin,Ahmed Mehdi Roula,Esteban Vanegas Márquez,Vidal Marie-Anne,Pierre-Olivier Bouchard Colloque MECAMAT : Grandes transformations: aujourd'hui..demain, R. Desmorat, S. Forest, L. Gormet, Y.Guilhem, E. Rouhaud, Jan 2023, Aussois (France), France Communication dans un congrès hal-04380590v1
3D analysis of void coalescence mechanisms in nodular cast iron based on finite element computation driven by digital volume correlation and laminography in-situ observations Pierre-Olivier Bouchard,Victor-Manuel Trejo-Navas,Marc Bernacki,Ante Buljac,Thilo F. Morgeneyeret al. Sixth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Jun 2019, Braunschweig, Germany Communication dans un congrès hal-02114052v1
Numerical analysis of the complex loading path during tube flow forming processes Vidal Marie-Anne,Pierre-Olivier Bouchard,François Frascati,Katia Mocellin,Jean Pierre Mallet NUMIFORM 2019, Jun 2019, Portsmouth, United States Communication dans un congrès hal-02429090v1
Analyse de la complexité du trajet de chargement lors du fluotournage de tôles Roula Ahmed,Pierre-Olivier Bouchard,Katia Mocellin Congrès Français de Mécanique, Aug 2019, Brest, France Communication dans un congrès hal-02429061v1
MODÉLISATION DE LA RUPTURE POUR DES MICROSTRUCTURES HÉTÉROGÈNES PAR APPROCHES LEVEL-SET ET ADAPTATION DE MAILLAGE Daniel Pino Muñoz,Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard Colloque MECAMAT, Jan 2019, Aussois, France Communication dans un congrès hal-02430631v1
Mesh-independent Crack Propagation under Mixed-Mode Loading using Remeshing and Dynamic Insertion of Cohesive Elements Diego Uribe,Daniel Pino Muñoz,Marco Delbo,Pierre-Olivier Bouchard Sixth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Jun 2019, Braunschweig, Germany Communication dans un congrès hal-02430595v1
Étude numérique et expérimentale du procédé de fluotournage cylindrique de tubes Vidal Marie-Anne,Pierre-Olivier Bouchard,Katia Mocellin,François Frascati,Jean Pierre Malletet al. Colloque MECAMAT, Jan 2019, Aussois, France Communication dans un congrès hal-02429053v1
Towards a crack propagation criterion and dynamic insertion of cohesive elements applied to thermal fatigue failure of comets/asteroids Diego Uribe,Pierre-Olivier Bouchard,Daniel Pino Muñoz,Marco Delbo Colloque MECAMAT, Jan 2019, Aussois, France Communication dans un congrès hal-02430586v1
Modeling of void closure mechanisms in multi-stages hot metal forming processes: a multiscale approach Pierre-Olivier Bouchard,Abdelouahed Chbihi,Marc Bernacki,Daniel Pino Muñoz NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes, Jun 2019, Portsmouth, United States Communication dans un congrès hal-02114042v1
A micromechanical study of void nucleation mechanisms in aluminium alloys Victor-Manuel Trejo-Navas,Marc Bernacki,Pierre-Olivier Bouchard ECCM - ECFD 2018, Jun 2018, Glasgow, United Kingdom Communication dans un congrès hal-01814091v1
Effect of void arrangement on ductile damage mechanisms in nodular cast iron: in situ 3D measurements and micromechanical simulations Ante Buljac,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard,Lukas Helfenet al. IUTAM Symposium on Size-Effects in Microstructure and Damage Evolution, May 2018, Lyngby, Denmark Communication dans un congrès hal-01814112v1
Analysis of local strain in nodular graphite cast iron at the onset of coalescence by means of 3D numerical modeling combined with X-Ray laminography and digital volume correlation Pierre-Olivier Bouchard,Victor-Manuel Trejo-Navas,Modesar Shakoor,Ante Buljac,Marc Bernackiet al. WCCM 2018, Jul 2018, New-York, United States Communication dans un congrès hal-01858264v1
Microscopic strain calculations at the onset of coalescence in nodular cast iron Victor-Manuel Trejo-Navas,Marc Bernacki,Pierre-Olivier Bouchard 22nd European Conference on Fracture - ECF22, Aug 2018, Belgrade, Serbia Communication dans un congrès hal-01858255v1
De l’intégration de données mesurées dans les simulations numériques à l’échelle microscopique Ante Buljac,Modesar Shakoor,Victor-Manuel Trejo-Navas,Marc Bernacki,Pierre-Olivier Bouchardet al. 3es journées multiéchelles, 2018, Tours, France Communication dans un congrès hal-01980077v1
Endommagement ductile : mesures volumiques et simulations micromécaniques. Thilo F. Morgeneyer,Ante Buljac,Modesar Shakoor,Victor-Manuel Trejo-Navas,Jan Neggerset al. 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France Communication dans un congrès hal-01504482v1
Numerical Validation Framework for Micromechanical Simulations Based on Synchrotron Imaging Ante F Buljac,Modesar Shakoor,Jan Neggers,Marc Bernacki,Pierre-Olivier Bouchardet al. SEM conference, Jun 2017, Indianapolis, United States Communication dans un congrès hal-01674839v1
Three-dimensional numerical modeling of ductile fracture mechanisms at the microscale Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard 4th ECCOMAS Young Investigator Conference - YIC 2017, Sep 2017, Milano, Italy Communication dans un congrès hal-01626736v1
Micromechanical simulations and analyses based on synchrotron 3D imaging for nodular cast iron tested under different stress states Thilo F. Morgeneyer,Ante F Buljac,Modesar Shakoor,Jan Neggers,Marc Bernackiet al. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France Communication dans un congrès hal-01625141v1
Computational multiphysics 3D homogenization framework for the design of fast-curing dental composites Gerry Agbobada,Pierre-Olivier Bouchard,Yannick Tillier VII International Conference on Coupled Problems in Science and Engineering, Jun 2017, Rhodes Island, Greece Communication dans un congrès hal-01744141v1
Numerical modeling of ductile fracture at the microscale combined with x-ray laminography and digital volume correlation. Pierre-Olivier Bouchard,Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Thilo F. Morgeneyeret al. 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 160016, ⟨10.1063/1.5008191⟩ Communication dans un congrès hal-01558442v1
On the integration of measured data in numerical simulations at the microscale Ante F Buljac,Modesar Shakoor,Victor-Manuel Trejo-Navas,Marc Bernacki,Pierre-Olivier Bouchardet al. IDICs conference, Nov 2017, Barcelona, Spain Communication dans un congrès hal-01674837v1
Numerical Validation Framework for Micromechanical Simulations Based on 3D Imaging Ante F Buljac,Modesar Shakoor,Jan Neggers,Marc Bernacki,Pierre-Olivier Bouchardet al. 7th GACM Colloquium on Computational Mechanics, Oct 2017, Stuttgart, Germany Communication dans un congrès hal-01674832v1
A new finite element framework for the modeling of ductile fracture mechanisms in heterogeneous microstructures. Pierre-Olivier Bouchard,Modesar Shakoor,Victor-Manuel Trejo-Navas,Marc Bernacki Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2017), Jun 2017, Nantes, France Communication dans un congrès hal-01558435v1
A micromechanical study of ductile damage in a finite element framework with advanced meshing capabilities Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard 14th International Conference on Fracture - ICF 14, Jun 2017, Rhodes, Greece Communication dans un congrès hal-01558400v1
A study of the effect of microstructural heterogeneities on ductile damage. Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France Communication dans un congrès hal-01504456v1
An adaptive level-set method with enhanced volume conservation for simulations in multiphase domains. Modesar Shakoor,Pierre-Olivier Bouchard,Daniel Pino Muñoz,Thomas Toulorge,Marc Bernacki 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France Communication dans un congrès hal-01504468v1
Influence of heterogeneous microstucture on the micromechanisms of ductile fracture Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France Communication dans un congrès hal-01899285v1
A robust deformation method for unstructured meshes subject to large boundary movements Thomas Toulorge,Modesar Shakoor,Pierre-Olivier Bouchard,Marc Bernacki,Youssef Mesriet al. VII International Conference on Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2017), Jun 2017, Rhodes, Greece Communication dans un congrès hal-01558407v1
Influence of Lode angle on modelling of micro voids closure in hot metal forming processes Abdelouahed Chbihi,Pierre-Olivier Bouchard,Marc Bernacki,Daniel Pino Muñoz ECCOMAS 2016, Jun 2016, Crete Island, Greece Communication dans un congrès hal-01480022v1
Packaging induced stress effects investigations on 40nm CMOS technology node: Measurements and optimization of device shifts Komi Atchou Ewuame,Pierre-Olivier Bouchard,Vincent Fiori,Sebastien Gallois-Garreignot,Karim Inalet al. 2015 IEEE 17th Electronics Packaging and Technology Conference (EPTC), Dec 2015, Singapore, Singapore. pp.346-351, ⟨10.1109/EPTC.2015.7412333⟩ Communication dans un congrès hal-01354249v1
Towards a mesh independent fracture modeling method using cohesive elements Daniel Pino Muñoz,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard ECF 21, Jun 2016, Catania, Italy Communication dans un congrès hal-01479772v1
An adaptive Level-Set Method with enhanced volume conservation for simulations in multiphase domains Modesar Shakoor,Pierre-Olivier Bouchard,Marc Bernacki WCCM 2016, Jul 2016, Seoul, South Korea Communication dans un congrès hal-01479188v1
Understanding and modeling of void closure mechanisms in hot metal forming processes: a multiscale approach Pierre-Olivier Bouchard,Abdelouahed Chbihi,Marc Bernacki,Daniel Pino Muñoz NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France Communication dans un congrès hal-01421656v1
Numerical Validation Framework for Micromechanical Simulations based on Synchrotron Imaging A F Buljac,M Shakoor,J Neggers,Marc Bernacki,Pierre-Olivier Bouchardet al. Multiscale modeling of heterogeneous structures, Sep 2016, Dubrovnik, Croatia Communication dans un congrès hal-01385416v1
An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures Modesar Shakoor,Pierre-Olivier Bouchard,Marc Bernacki WCCM 2016, Jul 2016, Seoul, South Korea Communication dans un congrès hal-01479189v1
Numerical modeling of failure mechanisms in complex heterogeneous microstructures Pierre-Olivier Bouchard,Modesar Shakoor,Victor-Manuel Trejo-Navas,Marc Bernacki ECF 21, Jun 2016, Catania, Italy Communication dans un congrès hal-01480023v1
Influence of Lode angle on modelling of void closure in hot metal forming processes Abdelouahed Chbihi,Pierre-Olivier Bouchard,Marc Bernacki,Daniel Pino Muñoz ICOMP'2016, May 2016, Liège, Belgium Communication dans un congrès hal-01480021v1
Ductile fracture – Influence of heterogeneous microstructure on nucleation, growth and coalescence mechanisms Victor-Manuel Trejo-Navas,Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France Communication dans un congrès hal-01421633v1
Une nouvelle méthode de volume immergé pour la modélisation numérique de l'endommagement ductile à l'échelle des microstructures Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard CSMA 2015 - Le 12ème Colloque National en Calcul des Structures, École Centrale de Nantes: GeM, ENSTA Brest: LMBS, INSA Rennes: LGCGM, Arts et Métiers ParisTech Angers: LAMPA, Université de Bretagne-Sud Lorient: LIMATB, Université de La Rochelle: LASIE, May 2015, Giens, France Communication dans un congrès hal-01247733v1
Ductile damage prediction in different cold forming processes Trong-Son Cao,Pierre-Olivier Bouchard,Pierre Montmitonnet 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-01247927v1
Advances in Level-Set Modeling of Recrystallization at the Polycrystal Scale - Development of the of the Digi-μ Software Benjamin Scholtes,Modesar Shakoor,Nathalie Bozzolo,Pierre-Olivier Bouchard,Amico Settefratiet al. The 18th International ESAFORM Conference on Material Forming - Material Forming ESAFORM 2015 , Apr 2015, Garz, Austria. pp.617-623 ⟨10.4028/www.scientific.net/KEM.651-653.617⟩ Communication dans un congrès hal-01247693v1
Modeling of ductile fracture mechanisms at the microscale using a new adaptive body-fitted monolithic method Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard COMPLAS 2015, Sep 2015, Barcelona, Spain Communication dans un congrès hal-01866361v1
Elaboration, par une approche sur VER, d’un modèle à champ moyen pour la prédiction de la refermeture de pores lors de la déformation à chaud de métaux Abdelouahed Chbihi,Michel Saby,Marc Bernacki,Pierre-Olivier Bouchard CSMA 2015 - Le 12ème Colloque National en Calcul des Structures, École Centrale de Nantes: GeM, ENSTA Brest: LMBS, INSA Rennes: LGCGM, Arts et Métiers ParisTech Angers: LAMPA, Université de Bretagne-Sud Lorient: LIMATB, Université de La Rochelle: LASIE, May 2015, Giens, France Communication dans un congrès hal-01247751v1
An adaptive body-fitted monolithic method for modeling the fracture of heterogeneous microstructures Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard CFRAC 2015, Jun 2015, Cachan, France Communication dans un congrès hal-01866362v1
Analysis of void clusters arrangements on coalescence using a new body-fitted immersed volume method for the modeling of ductile fracture at the microscale Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard IUTAM Symposium: Ductile Fracture and Localization, Mar 2015, Paris, France Communication dans un congrès hal-01866363v1
Unified finite element formulation to improve understanding of materials science Elisabeth Massoni,Marc Bernacki,Pierre-Olivier Bouchard,Elie Hachem COUPLED PROBLEMS 2015, May 2015, Venice, Italy Communication dans un congrès hal-01866373v1
Multiphysics and multiscale approaches for the modelling of metal forming processes Elisabeth Massoni,François Bay,Marc Bernacki,Pierre-Olivier Bouchard NAFEMS 2014, Jun 2014, Paris, France Communication dans un congrès hal-01866430v1
New challenges in numerical simulation of forming processes: multi-scale and multi-physics approaches Elisabeth Massoni,Pierre-Olivier Bouchard,Marc Bernacki,Elie Hachem CAE conference, Oct 2014, Verona, Italy Communication dans un congrès hal-01866426v1
Shot peening of heteregeneous microstructure: numerical modeling and influence on fatigue properties Abbass Toufayli,Pierre-Olivier Bouchard,Marc Bernacki 12th international conference on shot peening (ISCP12), Sep 2014, Goslar, Germany Communication dans un congrès hal-01866395v1
Numerical modelling of ductile damage at the microscale in a level set framework Modesar Shakoor,Marc Bernacki,Pierre-Olivier Bouchard CAE conference, Oct 2014, Verona, Italy Communication dans un congrès hal-01866400v1
Damage Prediction Using Several Types of Macro-scale Damage Models in Different Cold Wire Production Lines Trong-Son Cao,Pierre Montmitonnet,Pierre-Olivier Bouchard,Christian Bobadilla,Christophe Vachey 11th International Conference on Technology of Plasticity, ICTP 2014, Oct 2014, Nagoya, Japan. pp.185-190, ⟨10.1016/j.proeng.2014.09.148⟩ Communication dans un congrès hal-01110924v1
Recent and future developments in finite element metal forming simulation Jean-Loup Chenot,Marc Bernacki,Pierre-Olivier Bouchard,Lionel Fourment,Elie Hachemet al. 11th International Conference on Technology of Plasticity, ICTP 2014, Oct 2014, Nagoya, Japan Communication dans un congrès hal-01113396v1
Investigation of TSV induced thermo-mechanical stress: Implementation of piezoresistive sensors and correlation with simulation Komi Atchou Ewuame,Vincent Fiori,Karim Inal,Pierre-Olivier Bouchard,Sébastien Gallois-Garreignotet al. 9th European Conference on Residual Stresses, ECRS 2014, Jul 2014, Troyes, France. pp.975-981, ⟨10.4028/www.scientific.net/AMR.996.975⟩ Communication dans un congrès hal-01063670v1
Numerical modelling of the effect of nonproportional loading on ductile fracture at the microscale Modesar Shakoor,Marc Bernacki,Émile Roux,Pierre-Olivier Bouchard 20th European Conference on fracture (ECF20), Jun 2014, Trondheim, Norway Communication dans un congrès hal-01866405v1
CMOS stress sensor for 3D integrated circuits: Thermo-mechanical effects of Through Silicon Via (TSV) on surrounding silicon Komi Atchou Ewuame,Vincent Fiori,Karim Inal,Pierre-Olivier Bouchard,Sébastien Gallois-Garreignotet al. 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2014, Apr 2014, Ghent, Belgium. 8 p. - ISBN 978-1-4799-4791-1, ⟨10.1109/EuroSimE.2014.6813808⟩ Communication dans un congrès hal-01024448v1
Understanding and Modeling of Void Closure Mechanisms in Hot Metal Forming Processes: A Multiscale Approach Michel Saby,Marc Bernacki,Pierre-Olivier Bouchard 11th International Conference on Technology of Plasticity, ICTP 2014, Oct 2014, Nagoya, Japan. pp.137-142, ⟨10.1016/j.proeng.2014.09.140⟩ Communication dans un congrès hal-01110919v1
A new prediction model for void closure in hot metal forming Michel Saby,G. Boi,Joëlle Demurger,Marc Bernacki,Pierre-Olivier Bouchard Join New European Steel Industry Conference (1st ESTAD & 31st JSI), Apr 2014, Paris, France Communication dans un congrès hal-01866420v1
A novel monolithic approach for modelling crack propagation Karim Hitti,Marc Bernacki,Stéphanie El Feghali,Pierre-Olivier Bouchard CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00861818v1
Modélisation des micro mécanismes d'endommagement ductile par une approche couplant fonctions level-set et adaptation anisotrope de maillage Emile Roux,Marc Bernacki,Pierre-Olivier Bouchard CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00861396v1
Etude par éléments finis des effets de la distraction ostéogénique sur l'articulation temporo-mandibulaire Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00861822v1
Identification methodology and comparison of phenomenological ductile damage models for complex loading paths Trong-Son Cao,Pierre Montmitonnet,Pierre-Olivier Bouchard CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00861834v1
Influence of loading conditions on ductile damage nucleation, growth and coalescence mechanisms Pierre-Olivier Bouchard,Émile Roux,Marc Bernacki COMPLAS 2013, Sep 2013, Barcelona, Spain Communication dans un congrès hal-01866462v1
Finite Element Modeling of Void Nucleation, Growth and Coalescence for Large Plastic Strain and Complex Loading Paths Pierre-Olivier Bouchard,Emile Roux,Marc Bernacki The Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Jun 2013, Prague, Czech Republic. pp.Page 94 Communication dans un congrès hal-00845437v1
Analyse multi-échelle de la refermeture de porosités, appliquée à la mise en forme des métaux à chaud Michel Saby,Marc Bernacki,Pierre-Olivier Bouchard CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00847471v1
Anisotropic mesh adaptation dedicated to 2D/3D crack propagation Karim Hitti,Pierre-Olivier Bouchard,Marc Bernacki ECCOMAS 2012, Sep 2012, Vienna, Austria Communication dans un congrès hal-01866498v1
A multiscale analysis of void closure during hot forming processes Pierre-Olivier Bouchard,Michel Saby,Marc Bernacki,Émile Roux Forging Industry Association 2012 (FIA 2012), Sep 2012, Cleveland, United States Communication dans un congrès hal-01866505v1
High-resolution 3D finite-element model of the temporo-mandibular joint discs during jaw closing Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Sep 2012, Vienne, Austria. p Communication dans un congrès hal-00749526v1
A Finite Element Study Of The Effects Of Distraction Osteogenesis On The Articular Disc Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier 18th Congress of the European Society of Biomechanics (ESB2012), Jul 2012, Lisbonne, Portugal. pp.S267, ⟨10.1016/S0021-9290(12)70268-3⟩ Communication dans un congrès istex hal-00749518v1
Study for void closure relative to macroscopic mechanical loadings, using finite element simulations at a meso-scale Michel Saby,Marc Bernacki,Pierre-Olivier Bouchard 8th European Solid Mechanics Conference (ESMC8), Jul 2012, Graz, Austria Communication dans un congrès hal-01866474v1
Analysis of ductile damage mechanisms for different voids/particles configurations and under various loading conditions Pierre-Olivier Bouchard,Émile Roux,Marc Bernacki ECCOMAS 2012, Sep 2012, Vienna, Austria Communication dans un congrès hal-01866509v1
Comparative study of phenomenological coupled damage models - Application to industrial forming processes Trong-Son Cao,Christian Bobadilla,Pierre Montmitonnet,Pierre-Olivier Bouchard Journées Annuelles de la SF2M 2012 - SF2M Annual Meeting 2012, Oct 2012, Paris, France. 2 p Communication dans un congrès hal-00759469v1
Sensitivity study for void closure relative to macroscopic mechanical loadings, using finite element simulations at a meso-scale Michel Saby,Marc Bernacki,Pierre-Olivier Bouchard ECCOMAS 2012, Sep 2012, Vienna, Austria Communication dans un congrès hal-01866479v1
A new level-set framework for the modelling of nucleation, growth and coalescence of voids at the micro-scale Émile Roux,Pierre-Olivier Bouchard,Marc Bernacki ECCOMAS 2012, Sep 2012, Vienna, Austria Communication dans un congrès hal-01866485v1
Ductile damage parameters identification for cold metal forming applications Pierre-Olivier Bouchard,Jean-Marie Gachet,Emile Roux The 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. pp.47-52 - ISBN 978-0-7354-0911-8, ⟨10.1063/1.3589490⟩ Communication dans un congrès hal-00590272v1
Numerical modelling of ductile damage voids growth mechanism using a level-set technique and anisotropic mesh adaptation Emile Roux,Marc Bernacki,Pierre-Olivier Bouchard CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failures - Center for Numerical Methods in Engineering., Jun 2011, Barcelona, Spain Communication dans un congrès hal-00677783v1
Numerical Simulation and Optimization of the Forging Process Jean-Loup Chenot,Pierre-Olivier Bouchard,Lionel Fourment,Patrice Lasne International Cold Forging Congress - 12th ICFC 2011, May 2011, Stuttgart, Germany. 7 p. - ISBN 978-3-88355-385-6 Communication dans un congrès hal-00677694v1
Numerical investigation of ductile damage parameters identification: benefit of local measurements Emile Roux,Pierre-Olivier Bouchard The 7th International Conference on Inverse Problems in Engineering (ICIPE), May 2011, Orlando, United States. p. 221-226 - ISBN 978-0615471006 Communication dans un congrès hal-00676849v1
Simulation de la mise en forme et de la tenue mécanique de pièces obtenues par semi-découpe Jean-Marie Gachet,Guillaume Delattre,Pierre-Olivier Bouchard 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ; Clé USB Communication dans un congrès hal-00592717v1
Predicting mechanical behavior of half-blanked components Jean-Marie Gachet,Guillaume Delattre,Pierre-Olivier Bouchard CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failures - Center for Numerical Methods in Engineering., Jun 2011, Barcelona, Spain Communication dans un congrès hal-00677785v1
Anisotropic mesh adaptation for ductile damage and fracture modelling Pierre-Olivier Bouchard,Emile Roux,Rachid El Khaoulani,Guillaume Lebret,Marc Bernacki CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failures - Center for Numerical Methods in Engineering., Jun 2011, Barcelona, Spain Communication dans un congrès hal-00677780v1
Optimization of Metal Forming Processes for Improving Final Mechanical Strength Jean-Loup Chenot,Pierre-Olivier Bouchard,Lionel Fourment,Patrice Lasne,Emile Roux XI International Conference on Computational Plasticity. Fundamentals and Applications - COMPLAS XI, Sep 2011, Barcelona, Spain. 14 p Communication dans un congrès hal-00675507v1
Finite Element Modeling and Optimization of Mechanical Joining Technology Jean-Loup Chenot,Pierre-Olivier Bouchard,Elisabeth Massoni,Katia Mocellin,Patrice Lasne The 14th International Esaform Conference on Material Forming: ESAFORM 2011, Apr 2011, Belfast, United Kingdom. pp.247-1252 - ISBN 978-0-7354-0911-8, ⟨10.1063/1.3589687⟩ Communication dans un congrès hal-00675006v1
Digital microstructures matching statistical distributions of features in real materials - Example of forgings Marc Milesi,Yvan Chastel,Elie Hachem,Roland E. Logé,Pierre-Olivier Bouchard Metal Forming 2010, Sep 2010, Toyohashi, Japan. p. 1442-1445, ⟨10.1002/srin.201190002⟩ Communication dans un congrès istex hal-00614556v1
Digital microstructures matching statistical distributions of features in real materials – example of forgings Marc Milesi,Yvan Chastel,Elie Hachem,Marc Bernacki,Roland E. Logéet al. The 13th International Conference on Metal Forming (Metal Forming 2010), Sep 2010, Toyohashi, Japan Communication dans un congrès hal-01867798v1
Ductile Damage Material Parameter Identification: Numerical Investigation Émile Roux,Pierre-Olivier Bouchard Tenth International Conference on Computational Structures Technology, Sep 2010, Valencia, Spain. Paper 135 - ISBN 978-1-905088-38-6, ⟨10.4203/ccp.93.135⟩ Communication dans un congrès hal-00685303v1
A multiscale analysis of ductile steel grades damage and fracture mechanisms Pierre-Olivier Bouchard,Ludovic Bourgeon,Roland E. Logé,Catherine Verdu,Éric Maire 12th International Conference on Fracture 2009 - ICF-12, Jul 2009, Ottawa, Canada. pp.7166-7173 - ISBN 978-1-6173-227-7 Communication dans un congrès hal-00763063v1
Computational modeling of electrical contact crimping and mechanical strength analysis Katia Mocellin,Matthieu Petitprez,Pierre-Olivier Bouchard,Christophe Desjean 2010 Proceedings of the 56th IEEE Holm Conference on Electrical Contacts (HOLM), Oct 2010, Charleston, United States. 3 p., ⟨10.1109/HOLM.2010.5619564⟩ Communication dans un congrès hal-00570599v1
3D numerical micro-modelling of ductile damage mechanisms applied to hot metal forming processes Pierre-Olivier Bouchard,Ramzi Djebbi,Marc Milesi,Marc Bernacki IV European Conference on Computational Mechanics (ECCM 2010), May 2010, Paris, France Communication dans un congrès hal-01867818v1
Modélisation couplée chimie-mécanique de la réaction alcali-silice dans le béton Raphaëlle Naar,François Bay,Pierre-Olivier Bouchard,Eric Garcia-Diaz CFM'09 - XIXème Congrès Français de mécanique, Aug 2009, Marseille, France. 6 p Communication dans un congrès hal-00509333v1
Intégration numérique d'une loi élasto-plastique endommageable dans une formulation mixte et adaptation de maillage Rachid El Khaoulani,Pierre-Olivier Bouchard CFM'09 - XIXème Congrès Français de mécanique, Aug 2009, Marseille, France. 6 p Communication dans un congrès hal-00509329v1
On the role of particles distribution on damage and fatigue mechanisms Pierre-Olivier Bouchard,Marc Bernacki,Rachid El Khaoulani,Marc Milesi 12th ESAFORM Conference on Material Forming, Apr 2009, Enschede, Netherlands. pp.Pages 935-938, ⟨10.1007/s12289-009-0615-5⟩ Communication dans un congrès hal-00509423v1
Finite Element Modeling of Tube Piercing and Creation of a Crack Yvan Chastel,Aliou Diop,Silvio Fanini,Pierre-Olivier Bouchard,Katia Mocellin 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 355-358, ⟨10.1007/s12289-008-0068-2⟩ Communication dans un congrès hal-00510317v1
Behaviour of oxide scales in hot steel strip rolling Claire Grenier,Pierre-Olivier Bouchard,Pierre Montmitonnet,Martine Picard 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 1227-1230, ⟨10.1007/s12289-008-0163-4⟩ Communication dans un congrès hal-00510343v1
Multiaxial fatigue criterion accounting for anisotropy in forged components Marc Milesi,Yvan Chastel,Marc Bernacki,Roland E. Logé,Pierre-Olivier Bouchard 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 379-382, ⟨10.1007/s12289-008-0074-4⟩ Communication dans un congrès hal-00510349v1
Stress-induced lift-off method for kerf-loss-free wafering of ultra-thin (∼50 μm) crystalline Si wafers Frédéric Dross,Aurélien Milhe,Jo Robbelein,Ivan Gordon,Pierre-Olivier Bouchardet al. 33rd IEEE Photovoltaic Specialists Conference, PVSC 2008, May 2008, San Diego, United States. pp.Article number: 4922741 - ISBN 9781424416417, ⟨10.1109/PVSC.2008.4922741⟩ Communication dans un congrès hal-00846861v1
Modélisation de l'endommagement pour la simulation d'assemblages par déformation Sébastien Fayolle,Katia Mocellin,Pierre-Olivier Bouchard 8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France Communication dans un congrès hal-01490642v1
Finite element simulation of forming, joining and strength of sheet components Jean-Loup Chenot,Pierre-Olivier Bouchard,Yvan Chastel,Elisabeth Massoni Sheet Metal 2007, Apr 2007, Palermo, France. pp.Pages 21-28 - ISBN 978-0-87849-437-8, ⟨10.4028/www.scientific.net/KEM.344.21⟩ Communication dans un congrès hal-00509732v1
Finite Element Simulation of forming, joining and strength of sheet components J. L. Chenot,Pierre-Olivier Bouchard,Y. Chastel,Elisabeth Massoni Shemet Conference, Apr 2007, Palermo, Italy. pp. 21-28 Communication dans un congrès hal-00199080v1
Modélisation numérique de l'endommagement ductile pour le forgeage à froid des métaux Ludovic Bourgeon,Pierre-Olivier Bouchard CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. 6 p Communication dans un congrès hal-00521839v1
A new papadopoulos multiaxial fatigue criterion accounting for grain flow orientation in forged components Marc Milesi,Yvan Chastel,Marc Bernacki,Roland E. Logé,Pierre-Olivier Bouchard Fatigue Design 2007, Nov 2007, Senlis, France Communication dans un congrès hal-01871002v1
Study of the mechanical behavior of welded tubular joints for a better prediction of their life under thermo mechanical fatigue Marie Cécile Robin,Pierre-Olivier Bouchard,Roland Loge,Denis Delagnes,Vincent Velayet al. MECAMAT 2007, Jan 2007, Aussois, France. 4 p Communication dans un congrès hal-01771393v1
Car manifold's fatigue life under thermo mechanical loadings Marie Cécile Robin,Pierre-Olivier Bouchard,Roland Loge,Vincent Velay,Denis Delagneset al. Fatigue Design 2007, Nov 2007, Senlis, France. 7 p Communication dans un congrès hal-01760293v1
Simulation des assemblages par déformation. Vers une approche intégrée de l'assemblage dans la phase de dimensionnement Pierre-Olivier Bouchard,Sébastien Fayolle,Katia Mocellin,Pierre Ravassard Journées Internationales d'Etudes ITCT 2006, Nov 2006, Paris, France. 8 p Communication dans un congrès hal-00582326v1
Quantitative analysis of the impact of forging operations on fatigue properties of steel components N. Caillet,Pierre-Olivier Bouchard,Y. Chastel 11th international conference on metal forming, Sep 2006, Birmingham, United Kingdom. pp. 202-205 Communication dans un congrès hal-00199064v1
Damage and Discrete Crack Propagation Modelling : Some Results and Challenges For 2d And 3d Configurations Pierre-Olivier Bouchard ICF11 - International Conference on Fracture, Mar 2005, Turin, Italy. 6 p Communication dans un congrès hal-00581798v1
Numerical Models for Structural and Failure Analysis of Multimaterial Structures François Bay,Pierre-Olivier Bouchard,Jean-Loup Chenot Seventh International Conference on Computational Structures Technology, Sep 2004, Lisbon, Portugal. Chapter 9, pp 231-250, ⟨10.4203/csets.11.9⟩ Communication dans un congrès hal-00675116v1
Modelling of Discrete Crack Propagation Pierre-Olivier Bouchard,François Bay,Yvan Chastel,Jean-Loup Chenot,Isabelle Tovena The Fifth International Conference on Computational Structures Technology and The Second International Conference on Engineering Computational Technology, Sep 2000, Leuven, Belgium. Paper V.1 - pp 217-223, ⟨10.4203/ccp.67.5.1⟩ Communication dans un congrès hal-00675123v1
Influence of oxidation on mechanical properties of zircaloy 4 tubes under compaction - Numerical simulation of crack propagation Pierre-Olivier Bouchard,François Bay,Yvan Chastel,Isabelle Tovena International Symposium on Environmentally Induced Cracking of Metals held at the 39th Annual Conference of Metallurgists, Aug 2000, Ottawa, Canada. p.17-29 Communication dans un congrès hal-00536666v1

Chapitre d'ouvrage (5)

Advancements in the Simulation of 3D Ductile Damage Transition to Fracture with FORGE® José Alves,Hazem Eldahshan,Ugo Ripert,Richard Ducloux,Daniel Pino Muñozet al. Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, Springer Nature Switzerland, pp.275-283, 2024, Lecture Notes in Mechanical Engineering, ⟨10.1007/978-3-031-42093-1_27⟩ Chapitre d'ouvrage hal-04477640v1
Experimental-Numerical Validation Framework for Micromechanical Simulations Ante Buljac,Modesar Shakoor,Jan Neggers,Marc Bernacki,Pierre-Olivier Bouchardet al. Jurica Sorić, Peter Wriggers, Olivier Allix. Multiscale Modeling of Heterogeneous Structures, 86, Springer, pp.147-161, 2018, Lecture Notes in Applied and Computational Mechanics book series (LNACM), ⟨10.1007/978-3-319-65463-8_8⟩ Chapitre d'ouvrage hal-01656323v1
The prediction and avoidance of cracking in long products hot rolling (PACROLP Phase 2) J.M. Rodriguez-Ibabe,M.C. Revilla,N. Gonzalez,P.M. Lardizabal,D.C.J. Farrugiaet al. Pacrolp-II, 26321, Publications Office, 2013, 978-92-79-34585-2. ⟨10.2777/50283⟩ Chapitre d'ouvrage hal-01871081v1
Modelling the strength of self-piercing riveted joints Sébastien Fayolle,Pierre-Olivier Bouchard,Katia Mocellin Andreas Chrysanthou and Xin Sun. Self-Piercing Riveting, Properties, Processes and Applications, Woodhead Publishing, pp.79-107, 2013, Woodhead Publishing Series in Welding and Other Joining Technologies, eBook ISBN 9780857098849 - Print Book ISBN 9781845695354. ⟨10.1533/9780857098849.1.79⟩ Chapitre d'ouvrage hal-01052922v1
Modélisation numérique du procédé de rivetage auto-poinçonneur Pierre-Olivier Bouchard,Laurent Tollier Techniques de l'Ingénieur, BT3 (BM7860 - docB7308), Editions T.I., BM7860 - docB7308 - 18 p. + 2 p., 2005 Chapitre d'ouvrage hal-00616957v1

Thèse (1)

Contribution à la Modélisation Numérique en Mécanique de la Rupture et Structures Multimatériaux Pierre-Olivier Bouchard Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩ Thèse tel-00480372v1