Raynald Laheurte

46
Documents

Publications

Publications

Deposit thumbnail

Sensitivity analysis of dry machining using a Life Cycle Assessment approach

Maël Jeulin , Bertrand Laratte , Raynald Laheurte , Philippe Darnis , Olivier Cahuc

Journal of Manufacturing Processes, 2024, 117, pp.205-212. ⟨10.1016/j.jmapro.2024.02.063⟩

Article dans une revue hal-04521123v1
Deposit thumbnail

Uncertainty reduction in residual stress measurements by an optimised inverse solution using nonconsecutive polynomials

Diego L. Brítez , Michael B. Prime , Sana Werda , Raynald Laheurte , Philippe Darnis et al.

Strain, 2022, 59 (1), pp.e12430. ⟨10.1111/str.12430⟩

Article dans une revue hal-03997629v1
Deposit thumbnail

A 6-components mechanistic model of cutting forces and moments in milling

Maël Jeulin , Olivier Cahuc , Philippe Darnis , Raynald Laheurte

Forces in Mechanics, 2022, ⟨10.1016/j.finmec.2022.100130⟩

Article dans une revue hal-03971908v1

Experimental study on cutting flexible textile materials and the sharpening process of a vibrating blade

Intissar Farah , Olivier Cahuc , Philippe Darnis , Raynald Laheurte , Didier Chabirand et al.

Procedia CIRP, 2021, 102, pp.447-452. ⟨10.1016/j.procir.2021.09.076⟩

Article dans une revue hal-03498719v1
Deposit thumbnail

Study of the influence of the hardening rule on a multi-step global manufacturing process modeling.

Diego Britez , Sana Werda , Raynald Laheurte , Philippe Darnis , Olivier Cahuc

Procedia CIRP, 2021, 104, pp.1412-1417. ⟨10.1016/j.procir.2021.11.238⟩

Article dans une revue hal-03511782v1

3D milling modeling: mechanical actions, strains, strain rates and temperature calculations in the three cutting zones

Wadii Yousfi , Olivier Cahuc , Raynald Laheurte , Philippe Darnis , Madalina Calamaz

International Journal of Advanced Manufacturing Technology, 2018, 95 (5-8), pp.1931-1940

Article dans une revue hal-02022522v1

Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool\textendashchip contact lengths

Floran Barelli , Vincent Wagner , Raynald Laheurte , Gilles Dessein , Philippe Darnis et al.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, 231 (13), pp.2384--2395

Article dans une revue hal-01950780v1

Experimental study on cutting flexible sheet materials using an oscillating knife

Quentin Cosson-Coche , Olivier Cahuc , Philippe Darnis , Raynald Laheurte , Denis Teissandier et al.

International Journal of Clothing Science and Technology, 2017, 29 (3), pp.349-365

Article dans une revue hal-02022519v1

Comparison of the chip formations during turning of Ti64 β and Ti64 α+β

Vincent Wagner , Floran Barelli , Gilles Dessein , Raynald Laheurte , Philippe Darnis et al.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, pp.0954405417728309

Article dans une revue hal-01950749v1
Deposit thumbnail

Thermal and microstructure study of the chip formation during turning of Ti64 β lamellar titanium Structure

Vincent Wagner , Floran Barelli , Gilles Dessein , Raynald Laheurte , Phillipe Darnis et al.

Journal of Manufacturing Science and Engineering, 2017, 140 (3), pp.031010. ⟨10.1115/1.4038597⟩

Article dans une revue hal-02134620v1

3D modelling of kinematic fields in the cutting area: application to milling

W. Yousfi , R. Laheurte , Ph. Darnis , O. Cahuc , M. Calamaz

International Journal of Advanced Manufacturing Technology, 2016, 86 (9-12), pp.2735-2745

Article dans une revue hal-02021166v1

3D modeling of strain fields and strain rate in the cutting area: application to milling

W. Yousfi , Ph. Darnis , O. Cahuc , R. Laheurte , M. Calamaz

International Journal of Advanced Manufacturing Technology, 2016, 84 (9-12), pp.2207-2218

Article dans une revue hal-02021162v1
Deposit thumbnail

Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths

Floran Barelli , Vincent Wagner , Raynald Laheurte , Gilles Dessein , Philippe Darnis et al.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 231 (13), pp.2384-2395. ⟨10.1177/0954405416629589⟩

Article dans une revue hal-03033046v1

Subsurface mechanical damage during bound abrasive grinding of fused silica glass

P. Blaineau , D. André , R. Laheurte , P. Darnis , N. Darbois et al.

Applied Surface Science, 2015, 353, pp.764-773. ⟨10.1016/j.apsusc.2015.07.047⟩

Article dans une revue istex hal-02022513v1

Determining the Position of Cutting Tool in Drilling for Analysis of Mechanical Actions

Elena Luminiţa Olteanu , Raynald Laheurte , Philippe Darnis , Claudiu Florinel Bîşu

Applied Mechanics and Materials, 2013, 325-326, pp.1382-1386. ⟨10.4028/www.scientific.net/amm.325-326.1382⟩

Article dans une revue hal-03972067v1

Relations between subsurface damage depth and surface roughness of grinded fused silica

P. Blaineau , R. Laheurte , P. Darnis , N. Darbois , O. Cahuc et al.

Optics Express, 2013, 21 (25), pp.30433. ⟨10.1364/OE.21.030433⟩

Article dans une revue hal-02022508v1

Correlation between Torsor Measurements on the Chip Orientation

Olivier Cahuc , Claudiu Bisu , Alain Gérard , Philippe Darnis , Raynald Laheurte

Advanced Materials Research, 2013, 698, pp.79-88

Article dans une revue hal-02022507v1

The Preliminary Study Of Machinability During Milling Of Titanium Alloy (Ti-6Al-4V)

Claudia Serboi , Stefan Velicu , Philippe Darnis , Raynald Laheurte , Cristian Ionescu

Applied Mechanics and Materials, 2012, 186, pp.200-207. ⟨10.4028/www.scientific.net/amm.186.200⟩

Article dans une revue hal-03972085v1
Deposit thumbnail

Subsurface damage distribution characterization of ground surfaces using Abbott–Firestone curves

Raynald Laheurte , Philippe Darnis , Nathalie Darbois , Olivier Cahuc , Jérôme Neauport

Optics Express, 2012, 20, pp.13551 - 13559. ⟨10.1364/OE.20.013551⟩

Article dans une revue cea-01623566v1

Experimental milling moment model in orthogonal cutting condition: to an accurate energy balance

Gaëtan Albert , Raynald Laheurte , Jean-Yves K’nevez , Philippe Darnis , Olivier Cahuc

International Journal of Advanced Manufacturing Technology, 2011, 55 (9-12), pp.843-854

Article dans une revue hal-02022501v1

Mathematical Cutting Model Based on Experimental Approach: Drilling Application

Jean Yves K'Nevez , Olivier Cahuc , Philippe Darnis , Raynald Laheurte

Applied Mechanics and Materials, 2011, 62, pp.77-84

Article dans une revue hal-02022503v1
Deposit thumbnail

Self-excited vibrations in turning : Forces torsor analysis

Claudiu-Florinel Bisu , Alain Gérard , Jean-Yves K'Nevez , Raynald Laheurte , Olivier Cahuc

Int. J. of Advanc. Manufac. Tech., 2009, 44 (5-6), pp.447-462. ⟨10.1007/s00170-08-1850-5⟩

Article dans une revue hal-00410366v2
Deposit thumbnail

New method to characterize a machining system: application in turning

Claudiu-Florinel Bisu , Jean-Yves K'Nevez , Philippe Darnis , Raynald Laheurte , Alain Gérard

Int. J. of Mat. Form., 2009, 2 (2), pp.93-105. ⟨10.1007/s12289-009-0395-y⟩

Article dans une revue hal-00408731v1
Deposit thumbnail

Nouvelle analyse des phénomènes vibratoires en tournage

Claudiu-Florinel Bisu , Philippe Darnis , Jean-Yves K'Nevez , Olivier Cahuc , Raynald Laheurte et al.

Mechanics & Industry, 2007, pp.1-18

Article dans une revue hal-00179134v1

New vibrations phenomena analysis in turning Nouvelle analyse des phénomènes vibratoires en tournage

Claudiu-Florinel Bisu , Philippe Darnis , Jean-Yves K'Nevez , Olivier Cahuc , Raynald Laheurte et al.

Mechanics & Industry, 2007, 8, pp.497-503. ⟨10.1051/meca:2007073⟩

Article dans une revue hal-00407488v1

Behaviour law for cutting process

Raynald Laheurte , Olivier Cahuc , Philippe Darnis , Alain Gérard

International Journal of Advanced Manufacturing Technology, 2006, 29 (1-2), pp.17-23

Article dans une revue hal-02021178v1

Behaviour law for cutting process

Raynald Laheurte , Olivier Cahuc , Philippe Darnis , Alain Gérard

International Journal of Advanced Manufacturing Technology, 2006, 29, pp.17-23

Article dans une revue hal-00179131v1
Deposit thumbnail

Vers une instrumentation non-invasive pour l'analyse en temps réel de la puissance de fraisage : étude comparative avec une platine dynamométrique invasive

Jamy Vignaud , Jean-Yves K'Nevez , Gaëtan Albert , Stéphane Victor , Raynald Laheurte et al.

Manufacturing'21, UGA, Grenoble INP, CNRS, Jun 2024, GRENOBLE, France

Communication dans un congrès hal-04784377v1
Deposit thumbnail

Évaluation de l'impact environnemental équivalent lors du fraisage d'une pièce en Aluminium sous lubrification conventionnelle, MQL ou à sec

Mael Jeulin , Philippe Darnis , Raynald Laheurte , Olivier Cahuc

Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France

Communication dans un congrès hal-04011648v1
Deposit thumbnail

A comparison of different hardening rules on a multi-step global manufacturing process modeling

Diego Britez , Sana Werda , Raynald Laheurte , Philippe Darnis , Olivier Cahuc

24th International Conference on Material Forming ESAFORM 2021, Apr 2021, Liège, Belgium. ⟨10.25518/esaform21.4049⟩

Communication dans un congrès hal-03776845v1

A residual stresses optimization analysis in view of a multiscale manufacturing process modelling

Diego-Luis Britez-Gonzalez , Raynald Laheurte , Sana Werda , Philippe Darnis , Olivier Cahuc

MECAMAT-2020, 2020, nc, New Caledonia

Communication dans un congrès hal-02946625v1
Deposit thumbnail

Analyse de la sensibilité et des domaines de validité des modélisations analytiques de la coupe.

Wiliam Yousfi , Raynald Laheurte , Madalina Calamaz , Philippe Darnis , Olivier Cahuc

Congrès français de mécanique (21 ; 2013 ; Bordeaux (Gironde))., Aug 2013, France. pp.1-6

Communication dans un congrès hal-00920153v1
Deposit thumbnail

Relations entre la rugosité, les efforts de coupe et la profondeur de dommages en sous surface (SSD) lors de la rectification des verres de silice

Pierre Blaineau , Raynald Laheurte , Philippe Darnis , Olivier Cahuc , Nathalie Darbois et al.

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440579v1

Machinability of Titanium Alloys (TA6V αβ, β) and workpiece deformation.

F. Barelli , Gilles Dessein , P. Darnis , R. Laheurte , O. Cahuc et al.

The 5th International Conference on Structural Analysis of Advanced Materials ICSAAM, 2013, Island of Kos, Greece

Communication dans un congrès hal-02183712v1
Deposit thumbnail

Loi de comportement pour la modélisation de l'usinage : densité de dislocations et second gradient

Raphaël Royer , Olivier Cahuc , Lars-Erik Lindgren , Dimitri Jacquin , Philippe Darnis et al.

CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France

Communication dans un congrès hal-03440560v1
Deposit thumbnail

Development of a strain-gradient plasticity behaviour law for use in machining processes

Raphaël Royer , Philippe Darnis , Raynald Laheurte , Alain Gérard , Olivier Cahuc

IDMME - Virtual concept, Oct 2010, Bordeaux, France. pp.432

Communication dans un congrès hal-00661883v1

Analyse du torseur complet dans une opération de tournage : première étude du frottement dans un cas de vibrations auto-entretenues

Miron Zapciu , Olivier Cahuc , Jean-Yves K'Nevez , Claudiu-Florinel Bisu , Raynald Laheurte et al.

Colloque National AIP PRIMECA, Apr 2009, La Plagne, France. pp.1-10

Communication dans un congrès hal-00407564v1
Deposit thumbnail

DETERMINATION DU CENTRE DE RAIDEUR POUR LES MACHINES-OUTILS - APPLICATION AU TOURNAGE

Claudiu-Florinel Bisu , Jean-Yves K'Nevez , Philippe Darnis , Olivier Cahuc , Raynald Laheurte et al.

Assises MUGV 200, May 2008, NANTES, France. pp.1-10

Communication dans un congrès hal-00408723v1
Deposit thumbnail

ANALYZES GEOMETRY OF PART AND CHIPS AT THE TIME OF REGENERATIVES VIBRATIONS

Claudiu-Florinel Bisu , Jean-Yves K'Nevez , Alain Gérard , Raynald Laheurte

17 th International Conference on Manufacturing Systems, Nov 2008, BUCAREST, Romania. pp.205-208

Communication dans un congrès hal-00420008v1

Dynamic model of the three-dimensional cut 18th International DAAAM Symposium, 24-27th October 2007, Zadar, Croatie

Claudiu Florinel Bisu , Olivier Cahuc , Philippe Darnis , Jean-Yves K'Nevez , Raynald Laheurte et al.

18th International DAAAM Symposium, Oct 2007, Zadar, Croatia. section B 2 pp1-2

Communication dans un congrès hal-00179148v1
Deposit thumbnail

Etude expérimentale de la coupe en fraisage

Gaetan Albert , O. Cahuc , R. Laheurte , P. Darnis

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03360481v1
Deposit thumbnail

THE REGENERATIVE VIBRATIONS INFLUENCE ON THE MECHANICAL ACTIONS IN TURNING

Claudiu-Florinel Bisu , Raynald Laheurte , Alain Gérard , Jean-Yves K'Nevez

15th Int. Conf.Manuf. Syst., Oct 2006, BUCAREST, Romania. pp.291-294

Communication dans un congrès hal-00420006v1

The regenerative vibration influence on the mechanical actions turning

Claudiu-Florinel Bisu , Raynald Laheurte , Alain Gérard , Jean-Yves K'Nevez

15th International Conference on Manufacturing Systems Bucharest, Oct 2006, Bucarest, Romania. pp.291-294

Communication dans un congrès hal-00179150v1

Strain gradient plasticity theory for cutting process

Raynald Laheurte , Olivier Cahuc , Philippe Darnis , Alain Gérard

14th International Conference On Manufacturing Systems, Oct 2004, Bucharest, Romania. pp.265-268

Communication dans un congrès hal-00179153v1

Evaluation de l'énergie mise en jeu et du comportement des outils de coupe dans l'usinage

Raynald Laheurte , Olivier Cahuc , Philippe Darnis , Alain Gérard

Evaluation de l'énergie mise en jeu et du comportement des outils de coupe dans l'usinage, Oct 2002, Tours, France. pp.9-15

Communication dans un congrès hal-00179159v1

Evolution du concept de la coupe tridimensionnelle

Alain Gérard , Olivier Cahuc , Raynald Laheurte , Philippe Darnis , Yves Couétard

13th International Conference On Manufacturing Systems, Oct 2002, Bucharest, Roumanie

Communication dans un congrès hal-00179157v1