Saha Mainak

Identifiants chercheurs

IdHAL :

saha-mainak

ORCID :

0000-0001-8979-457X

arXiv :

saha_m_1

ResearcherID :

http://www.researcherid.com/rid/X-1018-2018

Publications

Pré-publication, Document de travail (11)

Potential and perspectives on additive manufacturing of high-entropy alloys for ballistic impact applications Feraz Rab,Mainak Saha 2026 Pré-publication, Document de travail hal-05482863v1
Ordered B2 phase in a disordered FCC matrix: Current state of research on the development of low-density B2-strengthened Fe-Mn-Al-Ni-C steels Mainak Saha 2024 Pré-publication, Document de travail emse-04826376v1
On the advanced microstructural characterisation of additively manufactured alumina-zirconia based eutectic ceramics: Overview and outlook Mainak Saha 2023 Pré-publication, Document de travail hal-04022548v1
New frontiers in characterising ZrB2-MoSi2 ultra-high temperature ceramics Mainak Saha 2023 Pré-publication, Document de travail hal-04021995v1
3D printing of nanoceramics: Present status and future perspectives Mainak Saha,Mallik Manab 2023 Pré-publication, Document de travail hal-04022572v1
Fly ash composites: A review Saha Mainak 2022 Pré-publication, Document de travail hal-03643883v1
An insight into cyclic oxidation behaviour of ZrB 2 -20 vol.%MoSi 2 based ultra-high temperature ceramic matrix composite between 1100 °C and 1300 °C Saha Mainak,Pramanik Sourajit,Banik Rajdeep,Maurya Pooja,Singh Simratet al. 2022 Pré-publication, Document de travail hal-03652686v1
Additive manufacturing and characterisation of biomedical materials Saha Mainak,Mallik Manab 2022 Pré-publication, Document de travail hal-03652687v1
Grain boundary segregation in steels: Towards engineering the design of internal interfaces Saha Mainak 2022 Pré-publication, Document de travail hal-03643884v1
Order within disorder Mainak Saha 2022 Pré-publication, Document de travail hal-03643885v1
Oxidation of ZrB2-MoSi2 ultra high-temperature Ceramic Matrix Composites: A brief review Saha Mainak 2022 Pré-publication, Document de travail hal-03643881v1

Article dans une revue (15)

Effect of YB&lt;sub&gt;4&lt;/sub&gt; Reinforcement on the Microstructural Evolution and Mechanical Behaviour of AISI 420 Composites Produced by Vacuum Induction Melting M. Sadhasivam,Mainak Saha,L. John Berchmans,S.P. Kumaresh Babu,Sankararaman Sankaranarayanan Powders, 2026, 5 (1), pp.9. ⟨10.3390/powders5010009⟩ Article dans une revue hal-05539109v1
On the Solidification and Phase Stability of Re-Bearing High-Entropy Superalloys with Hierarchical Microstructures Wei-Che Hsu,Takuma Saito,Mainak Saha,Hideyuki Murakami,Taisuke Sasakiet al. Metals, 2025, 15 (8), pp.820. ⟨10.3390/met15080820⟩ Article dans une revue hal-05188510v1
Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements Jishnu Bhattacharyya,Seth Faberman,Aaron Sullivan,Mainak Saha,Taisuke Sasakiet al. Scripta Materialia, 2025, 262, pp.116659. ⟨10.1016/j.scriptamat.2025.116659⟩ Article dans une revue hal-05002495v1
Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion André Vidilli,Leonardo Gomes,Adriel Oliveira,Mainak Saha,Taisuke Sasakiet al. Progress in Additive Manufacturing, 2025, ⟨10.1007/s40964-025-01104-6⟩ Article dans une revue hal-05060356v1
Combinatorial Alloy Design: Renaissance in the Accelerated Development of High-Entropy Alloys M. Sadhasivam,S. Pavan Kumar,Mainak Saha,Chinmoy Mahata,K. Pradeep Transactions of the Indian National Academy of Engineering, 2024, ⟨10.1007/s41403-024-00462-x⟩ Article dans une revue hal-04553791v1
Advancing the hydrogen tolerance of ultrastrong aluminum alloys via nanoprecipitate modification Yafei Wang,Jianwei Tang,Hiro Fujihara,Nozomu Adachi,Yoshikazu Todakaet al. Corrosion Science, 2024, 240, pp.112471. ⟨10.1016/j.corsci.2024.112471⟩ Article dans une revue hal-04713360v1
Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography Baptiste Gault,Aparna Saksena,Xavier Sauvage,Paul a J Bagot,Leonardo Aotaet al. Microscopy and Microanalysis, 2024, ⟨10.1093/mam/ozae081⟩ Article dans une revue hal-04672948v1
Microstructure evolution and phase analysis of Sm60Ni40 alloy G. Vijayaragavan,D. Prabhu,M.B. Ponnuchamy,K.R.S. Preethi Meher,Ravi Gautamet al. Journal of Magnetism and Magnetic Materials, 2023, 566, pp.170323. ⟨10.1016/j.jmmm.2022.170323⟩ Article dans une revue hal-04194619v1
Revealing the Localization of NiAl-Type Nano-Scale B2 Precipitates Within the BCC Phase of Ni Alloyed Low-Density FeMnAlC Steel Mainak Saha,M. Ponnuchamy,M. Sadhasivam,Chinmoy Mahata,G. Vijayaragavanet al. JOM Journal of the Minerals, Metals and Materials Society, 2022, 74 (8), pp.3181-3190. ⟨10.1007/s11837-022-05349-2⟩ Article dans une revue hal-04194616v1
Metal-based conducive nano-inks: A review of synthesis and characterisation techniques Saha Mainak,Mallik Manab Smart Multifunctional Nano-inks: Fundamentals and Emerging Applications ISBN 978-0-323-91145-0, In press, ⟨10.1016/B978-0-323-91145-0.00003-7⟩ Article dans une revue (article de synthèse) hal-03834235v1
On the correlative microscopy analyses of nano-twinned domains in 2 mol% zirconia alloyed yttrium tantalate thermal barrier material K. Gururaj,Mainak Saha,Sumit Kumar Maurya,Rajat Nama,A. Alankaret al. Scripta Materialia, 2022, 212, pp.114584. ⟨10.1016/j.scriptamat.2022.114584⟩ Article dans une revue hal-04194617v1
ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C Saha Mainak,Mainak Saha Advances in Materials and Processing Technologies, 2021, pp.1-11. ⟨10.1080/2374068X.2021.1949175⟩ Article dans une revue hal-03336264v1
Additive manufacturing of ceramics and cermets: present status and future perspectives Saha Mainak,Manab Mallik Sadhana, 2021, 46 (3), ⟨10.1007/s12046-021-01685-2⟩ Article dans une revue hal-03336271v1
ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C Saha Mainak,Mainak Saha Advances in Materials and Processing Technologies, 2021, pp.1-11. ⟨10.1080/2374068X.2021.1949175⟩ Article dans une revue hal-03341691v1
Understanding the role of Al2O3 formed during isothermal oxidation in a dual phase AlCoCrFeNi 2.1 Eutectic High-Entropy Alloy Saha Mainak Journal of Materials NanoScience, 2020, 7 (2), pp.68-72 Article dans une revue hal-03643882v1

Proceedings/Recueil des communications (8)

On the identification of strong Hydrogen-trapping sites in deformed pearlitic steels using 3D atom probe Mainak Saha,Zehao Li,Rintaro Ueji,Akinobu Shibata,Taisuke Sasaki Atom Probe Tomography & Microscopy (APT&M 2025), Jul 2025, Chennai, India, India. 2025 Proceedings/Recueil des communications hal-05171289v1
On the Hydrogen trapping tendencies of different microstructural features in a caliber-rolled pearlitic steel using 3D atom probe Mainak Saha,Rintaro Ueji,Akinobu Shibata,Taisuke Sasaki International conference on the strength of materials (ICSMA20), Jun 2025, Kyoto (Japan), Japan. 2025 Proceedings/Recueil des communications hal-05102988v1
On the identification of strong Hydrogen-trapping sites in a deformed pearlitic steel using 3D atom probe Mainak Saha,Zehao Li,Rintaro Ueji,Akinobu Shibata,Taisuke Sasaki International Conference on Electron Microscopy and XLIII Annual Meeting of the Electron Microscope Society of India, Jul 2025, Bangalore, India, India. 2025 Proceedings/Recueil des communications hal-05171292v1
Strengthening additively manufactured materials by cell boundary structure control Taisuke Sasaki,Mainak Saha,Takuma Saito,Ken Cho,Masayuki Okugawaet al. 177th Autumn Annual Meeting of Japan Institute of Metals, Sep 2025, Hokkaido, Japan. 2025 Proceedings/Recueil des communications hal-05271091v1
On the Hydrogen trapping tendencies of different microstructural features in a deformed pearlitic steel using Cryogenic Atom Probe Tomography Mainak Saha,Rintaro Ueji,Akinobu Shibata,Taisuke Sasaki The Japan Institute of Metals and Materials Autumn Meet, 2024 Proceedings/Recueil des communications hal-04713349v1
Identification of hydrogen trapping site in pearlitic steel by atom probe tomography Zehao Li,Mainak Saha,Ueji R,Kimura Y,Shibata Aet al. ALC24, The Japan Society of Vacuum and Surface Science (JVSS), 2024 Proceedings/Recueil des communications hal-04786569v1
On the three-dimensional atomic scale characterization of nano-scale B2 phase in Ni-alloyed Fe-Mn-Al-C low-density steel Mainak Saha,Saha Mainak,Sadhasivam M.,Ponnuchamy M.B.,Pradeep K.G. 2023 Proceedings/Recueil des communications hal-04272142v1
ɤ-TiAl alloy: revisiting tensile creep deformation behaviour and creep life at 832 °C Mainak Saha ICMPC 2021, 2021, ⟨10.1080/2374068X.2021.1949175⟩ Proceedings/Recueil des communications hal-04227558v1

Poster de conférence (1)

Towards exploring the possibility of strengthening an additively manufactured SUS316L steel through tuning of the local chemistry at cell boundaries Mainak Saha,Taisuke Sasaki Creation of materials by superthermal fields, Mar 2025, Osaka, Japan. 2025 Poster de conférence hal-05112873v1

Communication dans un congrès (3)

Formation of Disordered Nano-particles and their influence on the Elevated Temperature Deformation of High Entropy Superalloys Wei-Che Hsu,Jhuo-Lun Lee,Tso-Wei Chen,Mainak Saha,Takuma Saitoet al. http://www.nanokorea-sympo.or.kr/technical.php, Jul 2025, Gyeonggi-do, South Korea Communication dans un congrès hal-04635864v1
Microstructures and properties of precipitation strengthened high-entropy alloys processed by SLM Po-Heng Chou,Haoran Xie,Thaviti Naidu Palleda,Mainak Saha,Taisuke Sasakiet al. 32nd IMRC, Materials Research Society, 2024, Materials Research Society, Aug 2024, Cancun, Mexico, Mexico Communication dans un congrès hal-04675934v1
Analysis of structural differences of Ag Nanoparticles generated using Thermal and E-beam process based on SEM image Mainak Saha,Simrat Singh,Suvojit Acharjee,Chandrasekhar Kandagatla,Shubhro Chakrabartty Proceedings of the 2nd International Conference on Inventive Computation Technologies ( ICICT 2017), Aug 2017, Coimbatore, India. pp.920-924 Communication dans un congrès hal-03657624v1

Rapport (1)

On the thermal stability of phases and the associated mechanical response of Ni-alloyed Fe-Mn-Al-C low-density steel: A correlative Microscopy study Mainak Saha Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras. 2024 Rapport hal-04820549v1

Autre publication scientifique (8)

On the three-dimensional atomic scale characterisation towards understanding the sequence of nano-scale B2 phase evolution in Ni-alloyed Fe-Mn-Al-C low-density steel Mainak Saha,M B Ponnuchamy,M Sadhasivam,Chinmoy Mahata,G Vijayaragavanet al. EMSI 2023, 2023 Autre publication scientifique hal-04194251v1
Temporal evolution of nano-scale B2 precipitates and their localization in Nialloyed FeMnAlC low-density steel Mainak Saha,M.B. Ponnuchamy,M Sadhasivam,N. Chandrasekaran,M. Srinivasanet al. V-APT&M 2022, 2022 Autre publication scientifique hal-04194267v1
Three-dimensional atomic scale characterization of nano-scale B2 phase in Ni-alloyed Fe-Mn-Al-C low-density steel Mainak Saha,Karanam Gururaj,Chinmoy Mahata,M.B. Ponnuchamy,Krushna Kumbharet al. NMD-ATM 2022, 2022 Autre publication scientifique hal-04194270v1
On the three-dimensional atomic scale characterisation towards understanding the sequence of nano-scale B2 phase evolution in Ni-alloyed Fe-Mn-Al-C low-density steel Mainak Saha,M B Ponnuchamy,M Sadhasivam,Chinmoy Mahata,G Vijayaragavanet al. MetSA, Department of Metallurgical and Materials Engineering, IIT Madras, 2022 Autre publication scientifique hal-04194253v1
An Insight Into Cyclic Oxidation behavior of ZrB2-20 Vol.% MoSi2 Based Ultrahigh Temperature Ceramic Matrix Composite Mainak Saha,S. Pramanik,Rajdeep Banik,Pooja Maurya,Simrat Singhet al. 2020, ⟨10.1201/978100328402⟩ Autre publication scientifique hal-04227567v1
A brief discussion on the tensile creep deformation behaviour of wrought single-phase γ-TiAl Mainak Saha 2020, ⟨10.1016/j.matpr.2020.11.189⟩ Autre publication scientifique hal-04227555v1
An Insight Into Cyclic Oxidation behavior of ZrB2-20 Vol.% MoSi2 Based Ultrahigh Temperature Ceramic Matrix Composite Mainak Saha,Sourajit Pramanik,Rajdeep Banik,Pooja Maurya,Simrat Singhet al. NMD-ATM 2018, 2018, ⟨10.1201/978100328402⟩ Autre publication scientifique hal-04194263v1
Sequence of precipitation of sigma phase in CoCrCuMnNi High Entropy Alloy Mainak Saha,K. Guruvidyathri,A. Karati,B.S. Murty NMD-ATM 2018, 2017 Autre publication scientifique hal-04194271v1

Chapitre d'ouvrage (6)

Additive manufacturing of High Entropy Alloys: Trends, challenges and future perspectives Mainak Saha 3D printing, 2023, ⟨10.1515/9783111215112-003⟩ Chapitre d'ouvrage hal-04270122v1
Surface engineering of nanomaterials Mainak Saha,Mallik Manab Surface Engineering, , 2022, 9781003319375. ⟨10.1201/9781003319375⟩ Chapitre d'ouvrage hal-03776332v1
Additive Manufacturing and Characterisation of Biomedical Materials Saha Mainak,Mallik Manab Advanced Materials for Biomechanical Applications, 1, CRC Press, 2022, 9781003286806. ⟨10.1201/9781003286806⟩ Chapitre d'ouvrage hal-03642215v1
Metal-based conducive nano-inks: A review of synthesis and characterisation techniques Mainak Saha,Mallik Manab Smart Functional Nano-inks, In press, 9780323984959. ⟨10.26434/chemrxiv-2022-kpf0x⟩ Chapitre d'ouvrage hal-03769770v1
Cyclic oxidation behaviour of ZrB2 -20 vol.%MoSi2 based ultra-high temperature ceramic matrix composite between 1100 °C and 1300 °C Saha Mainak,Pramanik Sourajit,Banik Rajdeep,Maurya Pooja,Singh Simratet al. Modern Manufacturing Systems, In press, ⟨10.1201/9781003284024-13⟩ Chapitre d'ouvrage hal-03642361v2
Carbon-Based Nanocomposites: Processing, Electronic Properties and Applications Saha Mainak,Manab Mallik Carbon Nanomaterial Electronics: Devices and Applications. Advances in Sustainability Science and Technology, pp.97-122, 2021, ⟨10.1007/978-981-16-1052-3_5⟩ Chapitre d'ouvrage hal-03341690v1

Article de blog scientifique (1)

On the electronic properties of graphene-based nanocomposites Mainak Saha 2022 Article de blog scientifique hal-04223520v1