Sandrine Thuillier Professeur des universités

Identifiants chercheurs

IdHAL :

sandrine-thuillier

ORCID :

0000-0003-1259-2456

IdRef :

132136503

Présentation

Sandrine Thuillier est professeur des universités en mécanique depuis 2009 à l'Université Bretagne Sud (France). Ses activités de recherche portent sur la caractérisation expérimentale du comportement mécanique des matériaux à température ambiante et élevée, principalement des tôles d'alliages d'aluminium, d'aciers et d'alliages de titane, et dans une moindre mesure, des élastomères et des composites thermoplastiques. Elle concentre également ses efforts sur l'identification des paramètres des matériaux par méthode inverse, car ces paramètres sont une donnée d'entrée essentielle pour les modèles numériques fondés sur l'élasto-visco-plasticité, la limite d'élasticité anisotrope, l'endommagement ductile et la rupture macroscopique. Enfin, elle applique ses compétences scientifiques aux processus de mise en forme des métaux, tels que l'emboutissage, les défauts de surface, la flexion, la torsion et l'assemblage par déformation plastique, comme le sertissage et le clinchage.

Depuis 2022, elle est directrice de l'école doctorale SPI.bzh n°647

Depuis décembre 2023, elle est présidente de la section CNU60 (Conseil National des Universités),

Publications

Article dans une revue (89)

Inverse identification of the hardening behavior with a fully 3D virtual fields method Miguel G Oliveira,Sandrine Thuillier,António Andrade-Campos Advanced Modeling and Simulation in Engineering Sciences, 2025, 12 (1), pp.10. ⟨10.1186/s40323-025-00293-7⟩ Article dans une revue hal-05050227v1
Assessing the Potential of Heterogeneous Mechanical Tests for Sheet Metals Through Experimentally Measured Full-Fields M. Gonçalves,Sandrine Thuillier,A. Andrade-Campos Experimental Mechanics, 2025, ⟨10.1007/s11340-025-01168-z⟩ Article dans une revue hal-05000081v1
From single to multi-stage forming process of copper thin sheet Amine Lagroum,Pierre-Yves Manach,Sandrine Thuillier Mechanics & Industry, 2025, 26, ⟨10.1051/meca/2024039⟩ Article dans une revue hal-04915621v1
Towards a Digital Virtual Twin for Heterogeneous Thermomechanical Experiments Alessandro Lambrughi,Sandrine Thuillier,Sam Coppieters Strain, 2025, 61 (6), ⟨10.1111/str.70020⟩ Article dans une revue hal-05393756v1
Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending Ghinwa Ouaidat,Amine Lagroum,Ahmed Kacem,Sandrine Thuillier International Journal of Material Forming, 2024, 17 (3), pp.29. ⟨10.1007/s12289-024-01831-1⟩ Article dans une revue hal-04693354v1
Integrated model calibration for anisotropy, hardening and rupture - Application to the clinching process Abhishek Kumar,Ahmed Kacem,Sandrine Thuillier Procedia Structural Integrity, 2024, 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF 2023), Istanbul, October 2023, 61, pp.62-70. ⟨10.1016/j.prostr.2024.06.010⟩ Article dans une revue hal-04663502v1
Key performance indicators for heterogeneous mechanical tests M. Gonçalves,M.G. Oliveira,S. Thuillier,A. Andrade-Campos International Journal of Mechanical Sciences, 2024, 264, pp.108821. ⟨10.1016/j.ijmecsci.2023.108821⟩ Article dans une revue hal-04692040v1
Numerical Analysis on the Spatiotemporal Characteristics of the Portevin-Le Chatelier Effect in Ti-12Mo Alloy Shiyuan Luo,Yongxin Jiang,Sandrine Thuillier,Philippe Castany,Liangcai Zeng Metals and Materials International, 2023, 29 (2), pp.269-279. ⟨10.1007/s12540-022-01226-4⟩ Article dans une revue hal-03694398v1
On the use of the Gleeble® test as a heterogeneous test: sensitivity analysis on temperature, strain and strain rate Bernardete Coelho,Sandrine Thuillier IOP Conference Series: Materials Science and Engineering, 2022, 1238, ⟨10.1088/1757-899x/1238/1/012058⟩ Article dans une revue hal-03774221v1
Testing methodologies for the calibration of advanced plasticity models for sheet metals: A review Marco Rossi,Attilio Lattanzi,Luca Morichelli,João Martins,Sandrine Thuillieret al. Strain, 2022, 58 (6), ⟨10.1111/str.12426⟩ Article dans une revue hal-04693378v1
Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures Ahmed Kacem,Hervé Laurent,Sandrine Thuillier International Journal of Mechanical Sciences, 2022, 222, pp.107201. ⟨10.1016/j.ijmecsci.2022.107201⟩ Article dans une revue hal-04649904v1
Relevant material characterization for load prediction in incremental forming A. Abdelkefi,Dominique Guines,Lionel Leotoing,S. Thuillier International Journal of Material Forming, 2022, 15 (3), pp.23. ⟨10.1007/s12289-022-01676-6⟩ Article dans une revue hal-03631021v1
Quality of the strain state in simple shear testing using field measurement techniques Baptiste Reyne,Diane Hérault,Sandrine Thuillier,Pierre-Yves Manach International Journal of Mechanical Sciences, 2021, 208, pp.106660. ⟨10.1016/j.ijmecsci.2021.106660⟩ Article dans une revue hal-04693465v1
Incremental forming of friction-stir welded aluminium blanks: an integrated approach P. Carlone,S. Thuillier,A. Andrade-Campos,R. de Sousa,R. Valente International Journal of Material Forming, 2021, 14 (5), pp.1121-1137. ⟨10.1007/s12289-021-01628-6⟩ Article dans une revue hal-04693475v1
Influence of experimental boundary conditions on the calibration of a ductile fracture criterion Ahmed Kacem,Hervé Laurent,Sandrine Thuillier Engineering Fracture Mechanics, 2021, 248, pp.107686. ⟨10.1016/j.engfracmech.2021.107686⟩ Article dans une revue hal-04649896v1
Calibration of a strain path change model for a dual phase steel Diane Hérault,Sandrine Thuillier,Shin-Yeong Lee,Pierre-Yves Manach,Frédéric Barlat International Journal of Mechanical Sciences, 2021, 194, pp.106217 -. ⟨10.1016/j.ijmecsci.2020.106217⟩ Article dans une revue hal-03493965v1
Mechanical properties of solution heat treated Al-Zn-Mg-Cu (7075) alloy under different cooling conditions: Analysis with full field measurement and finite element modeling Chanmi Moon,Sandrine Thuillier,Jinwoo Lee,Myoung-Gyu Lee Journal of Alloys and Compounds, 2021, 856, pp.158180. ⟨10.1016/j.jallcom.2020.158180⟩ Article dans une revue hal-04693440v1
Calibration of a modified Johnson-Cook model using the Virtual Fields Method and a heterogeneous thermo-mechanical tensile test J.M.P. Martins,S. Thuillier,A. Andrade-Campos International Journal of Mechanical Sciences, 2021, 202-203, pp.106511. ⟨10.1016/j.ijmecsci.2021.106511⟩ Article dans une revue hal-04693452v1
Evaluation of heterogeneous mechanical tests for model calibration of sheet metals Miguel Oliveira,Sandrine Thuillier,António Andrade-Campos Journal of Strain Analysis for Engineering Design, 2021, 57 (3), pp.208-224. ⟨10.1177/03093247211027061⟩ Article dans une revue hal-04693387v1
Prediction of coupled 2D and 3D effects in springback of copper alloys after deep drawing G.X. Ha,M. Oliveira,A. Andrade-Campos,P.Y. Manach,S. Thuillier International Journal of Material Forming, 2021, 14 (5), pp.1171-1187. ⟨10.1007/s12289-021-01631-x⟩ Article dans une revue hal-04693480v1
Prediction of elastic anisotropic thermo-dependent properties of discontinuous fiber-reinforced composites D Lopez,Sandrine Thuillier,Y. Grohens Journal of Composite Materials, 2020, ⟨10.1177/0021998319889397⟩ Article dans une revue hal-02478136v1
Investigation of the key process parameters in the hot forming of a shackle J. Cochet,S. Thuillier,N. Decultot,P. Manach International Journal of Advanced Manufacturing Technology, 2019, 105 (7-8), pp.3209-3219. ⟨10.1007/s00170-019-04451-1⟩ Article dans une revue hal-04693632v1
Calibration of anisotropic plasticity models using a biaxial test and the virtual fields method J.M.P. Martins,A. Andrade-Campos,S. Thuillier International Journal of Solids and Structures, 2019, 172, pp.21 - 37. ⟨10.1016/j.ijsolstr.2019.05.019⟩ Article dans une revue hal-03485827v1
Design of heterogeneous mechanical tests: Numerical methodology and experimental validation José Aquino,A. Gil Andrade-Campos,João Martins,Sandrine Thuillier Strain, 2019, 55 (4), ⟨10.1111/str.12313⟩ Article dans une revue hal-04693611v1
Dynamical properties of flax fibre reinforced PA11 over a large frequency range Federico Amenini,Julien Brocail,Michael Chauvin,Sandrine Thuillier Composites Science and Technology, 2019, 171, pp.234-243. ⟨10.1016/j.compscitech.2018.12.026⟩ Article dans une revue istex hal-04477405v1
Microstructure, thermo-mechanical properties and Portevin-Le Chatelier effect in metastable β Ti-xMo alloys S. Luo,P. Castany,S. Thuillier Materials Science and Engineering: A, 2019, 756, pp.61-70. ⟨10.1016/j.msea.2019.04.018⟩ Article dans une revue hal-02122158v1
Investigation of Portevin-Le Châtelier effect during Erichsen test L. Mansouri,J. Coër,S. Thuillier,H. Laurent,P. Manach International Journal of Material Forming, 2019, 13 (5), pp.687-697. ⟨10.1007/s12289-019-01511-5⟩ Article dans une revue hal-04693552v1
Comparison of inverse identification strategies for constitutive mechanical models using full-field measurements J. M. P. Martins,A. Andrade-Campos,S. Thuillier International Journal of Mechanical Sciences, 2018, 145, pp.330-345. ⟨10.1016/j.ijmecsci.2018.07.013⟩ Article dans une revue hal-02069343v1
Modeling Bake Hardening Effects in Steel Sheets-Application to Dent Resistance Sandrine Thuillier,Shun-Lai Zang,Julien Troufflard,P. Y. Manach,Anthony Jegat Metals, 2018, 8 (8), pp.6137. ⟨10.3390/met8080594⟩ Article dans une revue hal-02069291v1
Spatiotemporal characteristics of Portevin-Le Chatelier effect in Ti-Mo alloys under thermo-mechanical loading S. Luo,P. Castany,S. Thuillier,M. Huot Materials Science and Engineering: A, 2018, 733, pp.137-143. ⟨10.1016/j.msea.2018.07.022⟩ Article dans une revue hal-01874722v1
Mechanical design of a heterogeneous test for material parameters identification N. Souto,A. Andrade-Campos,S. Thuillier International Journal of Material Forming, 2017, 10 (3), pp.353-367. ⟨10.1007/s12289-016-1284-9⟩ Article dans une revue hal-01697257v1
Heat treatment of 34CrNiMo6 steel used for mooring shackles J. Cochet,S. Thuillier,T. Loulou,Nicolas Decultot,P. Carreet al. International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2329-2346. ⟨10.1007/s00170-016-9951-z⟩ Article dans une revue hal-01697269v1
Prediction of failure in bending of an aluminium sheet alloy A. Pradeau,S. Thuillier,J. W. Yoon International Journal of Mechanical Sciences, 2016, 119, pp.23-35. ⟨10.1016/j.ijmecsci.2016.09.033⟩ Article dans une revue istex hal-02110743v1
A numerical methodology to design heterogeneous mechanical tests N. Souto,A. Andrade-Campos,S. Thuillier International Journal of Mechanical Sciences, 2016, 107, pp.264-276. ⟨10.1016/j.ijmecsci.2016.01.021⟩ Article dans une revue istex hal-02110772v1
Thermo-mechanical forming of a large sling shackle P. Y. Manach,N. Decultot,Sandrine Thuillier,Julien Cochet International Journal of Advanced Manufacturing Technology, 2016, 86 (5-8), pp.1573-1591. ⟨10.1007/s00170-015-8300-y⟩ Article dans une revue hal-04636544v1
Prediction of flow stress and surface roughness of stainless steel sheets considering an inhomogeneous microstructure Cong Hanh Pham,Sandrine Thuillier,Pierre-Yves Manach Materials Science and Engineering: A, 2016, 678, pp.377-388. ⟨10.1016/j.msea.2016.09.101⟩ Article dans une revue istex hal-04695318v1
Thermo-mechanical modeling of Portevin-Le Chatelier instabilities under various loading paths L. Z. Mansouri,S. Thuillier,P. Y. Manach International Journal of Mechanical Sciences, 2016, 115, pp.676-688. ⟨10.1016/j.ijmecsci.2016.08.001⟩ Article dans une revue istex hal-02110750v1
Mechanical Properties Involved in the Micro-forming of Ultra-thin Stainless Steel Sheets Cong-Hanh Pham,Sandrine Thuillier,Pierre-Yves Manach Metallurgical and Materials Transactions A, 2015, 46 (8), pp.3502-3515. ⟨10.1007/s11661-015-2978-1⟩ Article dans une revue hal-04695358v1
Material parameter identification within an integrated methodology considering anisotropy, hardening and rupture N. Souto,A. Andrade-Campos,S. Thuillier Journal of Materials Processing Technology, 2015, 220, pp.157-172. ⟨10.1016/j.jmatprotec.2015.01.017⟩ Article dans une revue istex hal-04695350v1
2D Springback and Twisting of Ultra‐Thin Stainless Steel U‐Shaped Parts Cong Hanh Pham,Sandrine Thuillier,Pierre‐yves Manach Steel Research International, 2015, 86 (8), pp.861-868. ⟨10.1002/srin.201400569⟩ Article dans une revue hal-04695360v1
Design of an indicator to characterize and classify mechanical tests for sheet metals N. Souto,S. Thuillier,A. Andrade-Campos International Journal of Mechanical Sciences, 2015, 101-102, pp.252-271. ⟨10.1016/j.ijmecsci.2015.07.026⟩ Article dans une revue (article de synthèse) hal-04263706v1
Potential of the Cross Biaxial Test for Anisotropy Characterization Based on Heterogeneous Strain Field Shunying Zhang,Lionel Leotoing,Dominique Guines,Sandrine Thuillier Experimental Mechanics, 2015, 55 (5), pp.817-835. ⟨10.1007/s11340-014-9983-y⟩ Article dans une revue hal-01151222v1
Calibration of anisotropic yield criterion with conventional tests or biaxial test Shunying Zhang,Lionel Leotoing,Dominique Guines,Sandrine Thuillier,Shun-Lai Zang International Journal of Mechanical Sciences, 2014, 85, pp.142-151. ⟨10.1016/j.ijmecsci.2014.05.020⟩ Article dans une revue hal-01005604v1
Twisting analysis of ultra-thin metallic sheets C.H. Pham,Sandrine Thuillier,Pierre-Yves Manach Journal of Materials Processing Technology, 2014, 214 (4), pp.844-855. ⟨10.1016/j.jmatprotec.2013.12.006⟩ Article dans une revue istex hal-00986854v1
Investigation of the rupture in tension and bending of DP980 steel sheet A Mishra,Sandrine Thuillier International Journal of Mechanical Sciences, 2014, pp.171-181. ⟨10.1016/j.ijmecsci.2014.04.023⟩ Article dans une revue istex hal-01115645v1
On the use of cyclic shear, bending and uniaxial tension–compression tests to reproduce the cyclic response of sheet metals Abbas Ghaei,Daniel Green,Sandrine Thuillier,Fabrice Morestin Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014, 229 (3), pp.453-462. ⟨10.1177/0954405414529122⟩ Article dans une revue hal-04695457v1
Kinematics of Portevin–Le Chatelier bands in simple shear P.Y. Manach,Sandrine Thuillier,J.W. Yoon,J. Coër,H. Laurent International Journal of Plasticity, 2014, 58, pp.66-83. ⟨10.1016/j.ijplas.2014.02.005⟩ Article dans une revue istex hal-01099846v1
Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography G. Requena,Éric Maire,Claire Leguen,Sandrine Thuillier Materials Science and Engineering: A, 2014, 589, pp.242-251. ⟨10.1016/j.msea.2013.09.084⟩ Article dans une revue istex hal-00985804v1
Influence of a Tensile Pre-Strain on Bending of Aluminium Alloy Sandrine Thuillier Key Engineering Materials, 2014, pp.1742-1749. ⟨10.4028/www.scientific.net/KEM.611-612.1742⟩ Article dans une revue hal-01115649v1
On the Development and Computational Implementation of Complex Constitutive Models and Parameters’ Identification Procedures Tiago Jordão Grilo,Nelson Souto,Robertt Valente,António Andrade-Campos,Sandrine Thuillieret al. Key Engineering Materials, 2013, 554-557, pp.936-948. ⟨10.4028/www.scientific.net/KEM.554-557.936⟩ Article dans une revue hal-04698669v1
Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data Benoît Revil-Baudard,Oana Cazacu,Sandrine Thuillier,Éric Maire Mechanics Research Communications, 2013, 50, pp.77-82. ⟨10.1016/j.mechrescom.2013.04.005⟩ Article dans une revue istex hal-00985576v1
Failure prediction in the hole-flanging process of aluminium alloys A. Kacem,A. Krichen,Pierre-Yves Manach,Sandrine Thuillier,Jeong-Won Yoon Engineering Fracture Mechanics, 2013, 99, pp.251-265. ⟨10.1016/j.engfracmech.2012.12.018⟩ Article dans une revue istex hal-00985616v1
Shape Optimization of the Conventional Simple Shear Specimen Nelson Souto,António Andrade-Campos,Sandrine Thuillier Key Engineering Materials, 2013, 554-557, pp.2156-2164. ⟨10.4028/www.scientific.net/KEM.554-557.2156⟩ Article dans une revue hal-04698689v1
Influence of prestrain on the numerical simulation of the roller hemming process Nicolas Le Maoût,Pierre-Yves Manach,Sandrine Thuillier Journal of Materials Processing Technology, 2012, 212 (2), pp.450-457. ⟨10.1016/j.jmatprotec.2011.10.008⟩ Article dans une revue hal-00715740v1
Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling Sandrine Thuillier,Eric Maire,Michel Brunet Materials Science and Engineering: A, 2012, 558, pp.217-225. ⟨10.1016/j.msea.2012.07.116⟩ Article dans une revue istex hal-00987155v1
Investigation of Springback of Metallic Sheets at Small Strains Pierre-Yves Manach,Sandrine Thuillier Strain, 2012, Volume 48 (Issue 3), pp.216-224. ⟨10.1111/j.1475-1305.2011.00814.x⟩ Article dans une revue istex hal-00715752v1
Prediction of anisotropy and hardening for metallic sheets in tension, simple shear and biaxial tension S.L. Zang,Sandrine Thuillier,A. Le Port,Pierre-Yves Manach International Journal of Mechanical Sciences, 2011, Volume 53 (Issue 5), pp.338-347. ⟨10.1016/j.ijmecsci.2011.02.003⟩ Article dans une revue istex hal-00715774v1
A model of one-surface cyclic plasticity and its application to springback prediction S.L. Zang,C. Guo,Sandrine Thuillier,M.G. Lee International Journal of Mechanical Sciences, 2011, Volume 53 (Issue 6), pp.425-435. ⟨10.1016/j.ijmecsci.2011.03.005⟩ Article dans une revue istex hal-00715762v1
Influence of ductile damage on the bending behaviour of aluminium alloy thin sheets Sandrine Thuillier,Nicolas Le Maoût,Pierre-Yves Manach Materials & Design, 2011, Volume 32 (Issue 4), pp.2049-2057. ⟨10.1016/j.matdes.2010.11.050⟩ Article dans une revue istex hal-00715779v1
The Effect of Temperature on Anisotropy Properties of an Aluminium Alloy J. Coër,Cédric Bernard,Hervé Laurent,A. Andrade-Campos,Sandrine Thuillier Experimental Mechanics, 2011, Volume 51 (Number 7), pp.1185-1195. ⟨10.1007/s11340-010-9415-6⟩ Article dans une revue istex hal-00715790v1
Characterization of surface defects after flanging of metallic sheets A. Le Port,Sandrine Thuillier,Pierre-Yves Manach Journal of Materials Processing Technology, 2011, Volume 211 (Issue 12), pp.2062-2071. ⟨10.1016/j.jmatprotec.2011.07.004⟩ Article dans une revue istex hal-00715746v1
Occurrence and numerical prediction of surface defects during flanging of metallic sheets A. Le Port,S. Thuillier,P.Y. Manach International Journal of Material Forming, 2010, vol.3 (no.3), pp.215-223. ⟨10.1007/s12289-009-0677-4⟩ Article dans une revue hal-00494394v1
Occurence of strain path changes in a two-stage deep drawing process Sandrine Thuillier,Pierre-Yves Manach,L.F. Menezes Journal of Materials Processing Technology, 2010, 210 (2), pp.226-232. ⟨10.1016/j.jmatprotec.2009.09.004⟩ Article dans une revue istex hal-00472195v1
Drawing, flanging and hemming of metallic thin sheets: A multi-step process Nicolas Le Maoût,Sandrine Thuillier,Pierre-Yves Manach Materials & Design, 2010, 31 (6), pp.2725-2736. ⟨10.1016/j.matdes.2010.01.030⟩ Article dans une revue istex hal-00472202v1
Classical and roll-hemming processes of pre-strained metallic sheets, Nicolas Le Maoût,S. Thuillier,P.Y. Manach Experimental Mechanics, 2010, Volume 50 (Number 7), pp.1087-1097. ⟨10.1007/s11340-009-9297-7⟩ Article dans une revue istex hal-00494110v1
Bending Limit Prediction of an Aluminum Thin Sheet Sandrine Thuillier,Nicolas Le Maoût,Pierre-Yves Manach International Journal of Material Forming, 2010, Volume 3 (Supplement 1), pp.223-226. ⟨10.1007/s12289-010-0747-7⟩ Article dans une revue hal-00715797v1
Occurrence and numerical prediction of surface defects during flanging of metallic sheets Alban Le Port,Sandrine Thuillier,Pierre-Yves Manach International Journal of Material Forming, 2010, 3 (3), pp.215-223. ⟨10.1007/s12289-009-0677-4⟩ Article dans une revue hal-00494122v1
Comparison of the work-hardening of metallic sheets in bending-unbending and simple shear Jérôme Carbonniere,Sandrine Thuillier,Francis Sabourin,Michel Brunet,Pierre-Yves Manach International Journal of Mechanical Sciences, 2009, 51 (2), pp.122-130. ⟨10.1016/j.ijmecsci.2008.12.006⟩ Article dans une revue istex hal-00472184v1
Aluminium alloy damage evolution for different strain paths - Application to hemming process Nicolas Le Maoût,Sandrine Thuillier,Pierre-Yves Manach Engineering Fracture Mechanics, 2009, 76 (9), pp.1202-1214 Article dans une revue hal-00472197v1
Comparison of the work-hardening of metallic sheets using tensile and shear strain paths Sandrine Thuillier,Pierre-Yves Manach International Journal of Plasticity, 2009, 25 (5), pp.733-751. ⟨10.1016/j.ijplas.2008.07.002⟩ Article dans une revue istex hal-00404007v1
Influence of constitutive model in springback prediction using the split-ring test Hervé Laurent,Renaud Grèze,Pierre-Yves Manach,Sandrine Thuillier International Journal of Mechanical Sciences, 2009, 51 (3), pp 233-245. ⟨10.1016/j.ijmecsci.2008.12.010⟩ Article dans une revue istex hal-00400919v1
Aluminum alloy damage evolution for different strain paths – Application to hemming process N. Le Maoût,S. Thuillier,P.Y. Manach Engineering Fracture Mechanics, 2009, 76 (9), pp.1202-1214. ⟨10.1016/j.engfracmech.2009.01.018⟩ Article dans une revue istex hal-04700595v1
Numerical simulation of the roll hemming process Sandrine Thuillier,Nicolas Le Maoût,Pierre-Yves Manach,D. Debois Journal of Materials Processing Technology, 2008, 198, pp.226-233. ⟨10.1016/j.jmatprotec.2007.07.004⟩ Article dans une revue istex hal-00399952v1
Effective properties of carbon black filled natural rubber: Experiments and modeling B. Omnès,S. Thuillier,P. Pilvin,Y. Grohens,S. Gillet Composites Part A: Applied Science and Manufacturing, 2008, 39 (7), pp.1141-1149. ⟨10.1016/j.compositesa.2008.04.003⟩ Article dans une revue istex hal-04700328v1
Non-linear mechanical behaviour of carbon black reinforced elastomers: experiments and multiscale modelling B. Omnès,Sandrine Thuillier,Philippe Pilvin,S. Gillet Plastics, Rubber and Composites, 2008, 37 (5-6), pp.251-257. ⟨10.1179/174328908X309457⟩ Article dans une revue hal-00399981v1
Material parameters identification : Gradient-based, genetic and hybrid optimization algorithms B.M. Chaparro,Sandrine Thuillier,L.F. Menezes,Pierre-Yves Manach,J.V. Fernandes Computational Materials Science, 2008, 44 (2), pp.339-346. ⟨10.1016/j.commatsci.2008.03.028⟩ Article dans une revue istex hal-00404004v1
Effective properties of carbon black filled natural rubber: Experiments and modelling B. Omnès,Sandrine Thuillier,Philippe Pilvin,Yves Grohens,S. Gillet Composites Part A: Applied Science and Manufacturing, 2008, 39 (7), pp.1141-1149 Article dans une revue hal-00400609v1
Mechanical behaviour of a metastable autenitic stainless steel under simple and complex loading paths S. Gallée,Pierre-Yves Manach,Sandrine Thuillier Materials Science and Engineering: A, 2007, 466, pp.47-55 Article dans une revue hal-00399965v1
Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths S. Gallée,P.Y. Manach,S. Thuillier Materials Science and Engineering: A, 2007, 466 (1-2), pp.47-55. ⟨10.1016/j.msea.2007.02.054⟩ Article dans une revue istex hal-04700353v1
On the determination of material parameters for internal variable thermoelastic-viscoplastic constitutive models A. Andrade-Campos,Sandrine Thuillier,Philippe Pilvin,F. Texeira-Dias International Journal of Plasticity, 2007, 23, pp.1349-1379. ⟨10.1016/j.ijplas.2006.09.002⟩ Article dans une revue istex hal-00399969v1
Micro-mechanical model of TPE made of polypropylene and rubber waste Gilles Ausias,Sandrine Thuillier,B. Omnès,S. Wiessner,Philippe Pilvin Polymer, 2007, 48 (11), pp.3367-3376. ⟨10.1016/j.polymer.2007.03.049⟩ Article dans une revue istex hal-00399246v1
Numerical Simulation of the Hemming Process in the case of Al Alloys S. Thuillier AIP Conference Proceedings, 2005, ⟨10.1063/1.2011303⟩ Article dans une revue hal-04598217v1
Experimental and numerical study of reverse re-drawing of anisotropic sheet metals S Thuillier,P.Y Manach,L.F Menezes,M.C Oliveira Journal of Materials Processing Technology, 2002, 125-126, pp.764-771. ⟨10.1016/S0924-0136(02)00387-4⟩ Article dans une revue hal-04700365v1
The Mechanical Behavior of a Slightly Compressible Rubber-Like Material: Correlation of Simulations and Experiments C. Moreau,S. Thuillier,G. Rio,V. Grolleau Rubber Chemistry and Technology, 1999, 72 (2), pp.269-282. ⟨10.5254/1.3538800⟩ Article dans une revue hal-04700403v1
Fibre optic sensor for physiological parameters C. Gagnadre,M. Billon,S. Thuillier Electronics Letters, 1998, 34 (21), pp.1991. ⟨10.1049/el:19981431⟩ Article dans une revue hal-04700409v1
Micromechanical Model of the Two Way Memory Effect in NiTi Alloys S. Thuillier,D. Favier,G. Canova Journal de Physique IV Proceedings, 1995, 05 (C8), pp.C8-587-C8-592. ⟨10.1051/jp4/199558587⟩ Article dans une revue istex hal-04700436v1
Interaction of microbands with grain boundaries in mild steel S. Thuillier,E.F. Rauch Scripta Metallurgica et Materialia, 1995, 32 (4), pp.541-546. ⟨10.1016/0956-716X(95)90834-7⟩ Article dans une revue istex hal-04700432v1
Development of microbands in mild steel during cross loading S. Thuillier,E.F. Rauch Acta Metallurgica et Materialia, 1994, 42 (6), pp.1973-1983. ⟨10.1016/0956-7151(94)90022-1⟩ Article dans une revue istex hal-04700439v1
Rheological behaviour of mild steel under monotonic loading conditions and cross-loading E.F. Rauch,S. Thuillier Materials Science and Engineering: A, 1993, 164 (1-2), pp.255-259. ⟨10.1016/0921-5093(93)90673-3⟩ Article dans une revue istex hal-04700446v1

Communication dans un congrès (64)

Virtual forming based on model calibration from heterogeneous tests Lisa Germain,Mafalda Gonçalves,Thibault Barret,Antonio Andrade-Campos,S. Thuillier ESAFORM 2025, May 2025, Paestum, Italy. pp.1568-1576, ⟨10.21741/9781644903599-169⟩ Communication dans un congrès hal-05062344v1
Heterogeneous testing model calibration as input to virtual forming of dual phase steels Lisa Germain,Mafalda Gonçalves,Antonio Andrade-Campos,Sandrine Thuillier Numisheet 2025, Jul 2025, Münich, Germany. pp.012046, ⟨10.1088/1742-6596/3104/1/012046⟩ Communication dans un congrès hal-05421485v1
Towards the digital twin of a multi-stage forming process for metallic sheets Nivesh Gautam,Tudor Balan,Francisco Chinesta,Sandrine Thuillier 26ème Congrès Français de Mécanique (CFM 2025), AFM - Association Française de Mécanique; LEM3 - Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux (LEM3 - UMR CNRS 7239); LEMTA - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée; ENSAM - Ecole Nationale Supérieure d'Arts et Métiers; CNRS - Centre national de la recherche scientifique, Aug 2025, Metz, France Communication dans un congrès hal-05313149v1
Material Parameter Identification Based on Heterogeneous Testing: Validation in case of a forming process Lisa Germain,Mafalda Gonçalves,Antonio Andrade-Campos,Sandrine Thuillier IDDRG 2025, Jun 2025, Lisbon, Portugal. pp.01075, ⟨10.1051/matecconf/202540801075⟩ Communication dans un congrès hal-05102080v1
Experimental investigation of heterogeneous mechanical tests M. Gonçalves,Sandrine Thuillier Material Forming, 2024, Toulouse, France. pp.1742-1751, ⟨10.21741/9781644903131-193⟩ Communication dans un congrès hal-04685716v1
Comparison of homogeneous anisotropic hardening models in the case of the direct redrawing of a DP600 steel N. Gautam,S. Yoon,F. Barlat,S. Thuillier 43RD INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IDDRG CONFERENCE, 2024, Mar 2024, DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND, Unknown Region. ⟨10.1088/1757-899X/1307/1/012029⟩ Communication dans un congrès hal-05061993v1
Performance Evaluation of Lubricants with Swift Cup Drawing Nathan Demazel,Ahmed Kacem,Sandrine Thuillier,Hervé Laurent,Patrick Briendet al. ESAFORM 2022, Apr 2022, Braga, PORTUGAL, Portugal. pp.1195-1203, ⟨10.4028/p-qh2392⟩ Communication dans un congrès hal-04650001v1
Error Estimation of the 3D Reconstruction of a Displacement Field from DIC Measurements Miguel Guimarães Oliveira,Attilio Lattanzi,Sandrine Thuillier,António Andrade-Campos,Marco Rossi ESAFORM 2022, Apr 2022, Braga (Portugal), Portugal. pp.2129-2136, ⟨10.4028/p-abe455⟩ Communication dans un congrès hal-05337769v1
On the topology design of a mechanical heterogeneous specimen using geometric and material nonlinearities M Gonçalves,A Andrade-Campos,S Thuillier INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2022), Université Bretagne Sud, Jun 2022, Lorient (56100), France. pp.012055, ⟨10.1088/1757-899X/1238/1/012055⟩ Communication dans un congrès hal-04693431v1
Calibration of the Elasto-Plastic Properties of Friction Stir Welded Blanks in Aluminum Alloy AA6082 Fausto Tucci,António Andrade-Campos,Sandrine Thuillier,Pierpaolo Carlone ESAFORM2022, Apr 2022, Braga (Portugal), Portugal. pp.2183-2192, ⟨10.4028/p-3a8e45⟩ Communication dans un congrès hal-05337766v1
Prediction of forming limit curve for AA6061-T6 at room and elevated temperatures Ahmed Kacem,Hervé Laurent,Sandrine Thuillier IDDRG2022, Jun 2022, Lorient (56100), France. pp.012044, ⟨10.1088/1757-899X/1238/1/012044⟩ Communication dans un congrès hal-04649973v1
Influence of temperature on the formability of an aluminum alloy Ahmed Kacem,Hervé Laurent,Sandrine Thuillier ESAFORM 2021 24th International Conference on Material Forming, University of Liège, Belgium, Apr 2021, Liège, Belgium. ⟨10.25518/esaform21.1511⟩ Communication dans un congrès hal-05337723v1
On the Elastoplastic Behavior of Friction Stir Welded Tailored Blanks for Single Point Incremental Forming Fausto Tucci,António Andrade-Campos,Sandrine Thuillier,Pierpaolo Carlone ESAFORM 2021 24th International ESAFORM Conference on Material Forming, University of Liège, Apr 2021, Liège, Belgium. ⟨10.25518/esaform21.437⟩ Communication dans un congrès hal-05337732v1
Uncertainty quantification in the volume reconstruction from stereo-DIC measurements using virtual experiments Mg Oliveira,A. Lattanzi,A. Andrade-Campos,S. Thuillier,M. Rossi 7e conférence internationale Photomechanics – IDICS, Nov 2021, Nantes (France), France. ⟨10.5281/zenodo.6908611⟩ Communication dans un congrès hal-05337770v1
Analysis of Heterogeneous Tests for Sheet Metal Mechanical Behavior ESAFORM M.G. Oliveira,Sandrine Thuillier,A. Andrade Campos ESAFORM, May 2020, Cottbus, Germany Communication dans un congrès hal-05009068v1
Analysis of Heterogeneous Tests for Sheet Metal Mechanical Behavior Miguel Guimarães Oliveira,Sandrine Thuillier,António Andrade-Campos 23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, ESAFORM, May 2020, Cottbus (online), Germany. pp.831-838, ⟨10.1016/j.promfg.2020.04.259⟩ Communication dans un congrès hal-04693606v1
Integrated Design in Welding and Incremental Forming: Material Model Calibration for Friction Stir Welded Blanks António Andrade-Campos,Sandrine Thuillier,João Martins,Pierpaolo Carlone,Fausto Tucciet al. 23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, ESAFORM, May 2020, Cottbus (online), Germany. pp.429-434, ⟨10.1016/j.promfg.2020.04.327⟩ Communication dans un congrès hal-04693577v1
Calibration of Johnson-Cook Model Using Heterogeneous Thermo-Mechanical Tests João Peixoto Martins,António Andrade-Campos,Sandrine Thuillier 23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, May 2020, Cottbus (online), Germany. pp.881-888, ⟨10.1016/j.promfg.2020.04.274⟩ Communication dans un congrès hal-05009057v1
Influence of the mechanical model of titanium T40 on the predicted forces during incremental forming process A. Abdelkefi,D. Guines,Lionel Leotoing,S. Thuillier 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019, May 2019, Vitoria-Gasteiz, Spain. pp.170010, ⟨10.1063/1.5112726⟩ Communication dans un congrès hal-02281899v1
Strain path change influence on residual stress after deep drawing D. Herault,S. Thuillier,P. Manach PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, ESAFORM, May 2019, Vitoria-Gasteiz, Spain. pp.060002, ⟨10.1063/1.5112597⟩ Communication dans un congrès hal-04693640v1
Incremental forming of Titanium T40 sheet: experimental and numerical investigations A. Abdelkefi,D. Guines,L. Leotoing,S. Thuillier 24ème Congrès Français de Mécanique, Aug 2019, Brest, France Communication dans un congrès hal-02328578v1
Integrated design in welding and incremental forming: Mechanical behavior of friction stir welded blanks S. Thuillier,A. Andrade-Campos,P. Carlone,R. Valente,R. de Sousa PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, ESAFORM, May 2019, Vitoria-Gasteiz, Spain. pp.060010, ⟨10.1063/1.5112605⟩ Communication dans un congrès hal-04693635v1
Calibration of Anisotropic Plasticity Models with an Optimized Heterogeneous Test and the Virtual Fields Method J.M.P. Martins,S. Thuillier,A. Andrade-Campos 2019 Annual Conference on Experimental and Applied Mechanics, Mar 2019, Reno, NV, United States. pp.25-32, ⟨10.1007/978-3-030-30098-2_5⟩ Communication dans un congrès hal-05337739v1
On the Design of Innovative Heterogeneous Tests Using a Shape Optimization Approach J. Aquino,A. Andrade Campos,N. Souto,S. Thuillier 21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034958⟩ Communication dans un congrès hal-02069336v1
Strain path changes in Reverse Redrawing of DP Steels Diane Herault,Sandrine Thuillier,Pierre-Yves Manach,Jean-Louis Duval INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE, IDDRG, Jun 2018, Waterloo, Canada, Canada. pp.012042, ⟨10.1088/1757-899X/418/1/012042⟩ Communication dans un congrès hal-04693653v1
Identification of Material Parameters or Plasticity Models A Comparative Study on the Finite Element Model Updating and the Virtual Fields Method J. M. P. Martins,S. Thuillier,A. Andrade-Campos 21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034964⟩ Communication dans un congrès hal-02069341v1
Experimental validation of a new heterogeneous mechanical test design J. Aquino,A. Andrade Campos,N. Souto,S. Thuillier 21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034928⟩ Communication dans un congrès hal-02069334v1
Rupture Model Based on Non-Associated Plasticity Adrien Pradeau,Jeong Whan Yoon,Sandrine Thuillier,Yanshan Lou,Shunying Zhang 21st International ESAFORM Conference on Material Forming (ESAFORM), Apr 2018, Univ Palermo, Palermo, ITALY, Italy. ⟨10.1063/1.5034937⟩ Communication dans un congrès hal-02069335v1
Design of a reverse deep drawing experiment enhancing strain path changes N. Ayachi,N. Guermazi,Py Manach,S Thuillier NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, NUMISHEET, Jul 2018, Tokyo (Japan), Japan. pp.012133, ⟨10.1088/1742-6596/1063/1/012133⟩ Communication dans un congrès hal-04695307v1
2D springback and twisting after drawing of copper alloy sheets S. Thuillier,C.H. Pham,P.Y. Manach NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, NUMISHEET, Jul 2018, Tokyo (Japan), Japan. pp.012124, ⟨10.1088/1742-6596/1063/1/012124⟩ Communication dans un congrès hal-04693661v1
Experimental and numerical investigation of the formability of an ultra-thin copper sheet C. H. Pham,S. Thuillier,P. Y. Manach 36th IDDRG Conference on Materials Modelling and Testing for Sheet Metal Forming, Jul 2017, Tech Univ Munich, Chair Met Forming and Casting, Munich, GERMANY, France. ⟨10.1088/1742-6596/896/1/012109⟩ Communication dans un congrès hal-02008169v1
Modélisation du comportement d'un thermoplastique renforcé par des fibres de verre discontinues lors de cycles de charges, décharges et relaxations Delphine Lopez,Sandrine Thuillier,Yves Grohens Journées Nationales sur les Composites 2017, École des Ponts ParisTech (ENPC), Jun 2017, 77455 Champs-sur-Marne, France Communication dans un congrès hal-01623688v1
Prediction of the bending behavior after pre-strain of an aluminum alloy A. Pradeau,S. Thuillier,J. Yoon ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.060015, ⟨10.1063/1.4963451⟩ Communication dans un congrès hal-04695331v1
Design of a mechanical test to characterize sheet metals - Optimization using B-splines or cubic splines Nelson Souto,Sandrine Thuillier,A. Andrade-Campos ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.040005, ⟨10.1063/1.4963427⟩ Communication dans un congrès hal-04695324v1
Anisotropic mechanical behavior of an injection molded short fiber reinforced thermoplastic Delphine Lopez,Sandrine Thuillier,Nicolas Bessières,Yves Grohens ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming, ESAFORM, Apr 2016, Nantes, France. pp.060007, ⟨10.1063/1.4963443⟩ Communication dans un congrès hal-04695330v1
Prediction of plastic instabilities under thermo-mechanical loadings in tension and simple shear P. Y. Manach,L. F. Mansouri,S. Thuillier 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Sep 2016, Bristol, ENGLAND, France. ⟨10.1088/1742-6596/734/3/032056⟩ Communication dans un congrès hal-02110741v1
Calibration of anisotropic yield criterion with conventional tests or biaxial test Zhang Shunying,Lionel Leotoing,Dominique Guines,Sandrine Thuillier IDDRG2015, May 2015, Shanghai, China Communication dans un congrès hal-01186218v1
Multi-stage hot forming process of shackles Julien Cochet,Sandrine Thuillier,Pierre-Yves Manach,Nicolas Decultot CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03446140v1
Identification of Anisotropic Yield Criterion Parameters from a Single Biaxial Tensile Test Shunying Zhang,Lionel Leotoing,Dominique Guines,Sandrine Thuillier ESAFORM 2014, May 2014, Espoo, Finland. pp.1710-1717, ⟨10.4028/www.scientific.net/KEM.611-612.1710⟩ Communication dans un congrès hal-00992888v1
Twisting of sheet metals C. Pham,S. Thuillier,P. Manach NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers, Jan 2014, Melbourne, France. pp.422-427, ⟨10.1063/1.4850005⟩ Communication dans un congrès hal-04698679v1
Influence of prestrain on the occurrence of PLC effect in an Al-Mg alloy P. Manach,J. Coër,H. Laurent,C. Bernard,S. Thuillier NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers, Jan 2014, Melbourne, France. pp.428-432, ⟨10.1063/1.4850006⟩ Communication dans un congrès hal-04698681v1
Manifestation de l'effet Portevin-Le Châtelier en cisaillement simple Jérémy Coër,Hervé Laurent,Sandrine Thuillier,Pierre-Yves Manach CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03440438v1
Calibration of material parameters of anisotropic yield criterion with conventional tests and biaxial test Shunying Zhang,Lionel Leotoing,Dominique Guines,Sandrine Thuillier 16th annual ESAFORM Conference on Material Forming, Apr 2013, Aveiro, Portugal. pp.2111-2117, ⟨10.4028/www.scientific.net/KEM.554-557.2111⟩ Communication dans un congrès hal-00872583v1
Ductile Damage in Tension and Bending for DP980 Steel Sheets Julien Troufflard,Guillermo Requena,Sandrine Thuillier,Eric Maire Key Engineering Materials, 2013, Unknown, Unknown Region. pp.110--117, ⟨10.4028/www.scientific.net/KEM.554-557.110⟩ Communication dans un congrès hal-01538213v1
Mechanical behavior of mild steel up to rupture: characterization and validation Nelson Souto,António Andrade-Campos,Sandrine Thuillier 2nd ECCOMAS Young Investigators Conference (YIC 2013), Sep 2013, Bordeaux, France Communication dans un congrès hal-00855887v1
Characterization of sheet metal plastic anisotropy by cross biaxial tensile test Shunying Zhang,Lionel Leotoing,Dominique Guines,Sandrine Thuillier Colloque Journée SF2M Section Ouest, Apr 2013, Lorient, France Communication dans un congrès hal-00872589v1
Vrillage de tôles métalliques ultra-minces après emboutissage Cong Hanh Pham,Sandrine Thuillier,Pierre-Yves Manach CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03440504v1
Investigation of Ductile Damage in DP980 Steel Sheets Using Mechanical Tests and X-ray Micro-Tomography A Mishra,C Leguen,S Thuillier,E Maire,Gary Menary AIP Conference Proceedings, 2011, Unknown, Ireland. pp.1464--1469, ⟨10.1063/1.3589723⟩ Communication dans un congrès hal-01538230v1
Surface defects in sheet metal forming : a simulative laboratory device and comparison with FE analysis Sandrine Thuillier,A. Le Port,Pierre-Yves Manach 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Aug 2011, Séoul, South Korea. ⟨10.1063/1.3623693⟩ Communication dans un congrès hal-00716990v1
Caractérisation du comportement mécanique d'un alliage d'aluminium en expansion biaxiale - Application aux courbes limite de formage Lionel Leotoing,Sandrine Thuillier,Dominique Guines JAUM2010, Aug 2010, Lorient, France Communication dans un congrès hal-00951394v1
A multi-step assembly process: drawing, flanging and hemming of metallic sheets Pierre-Yves Manach,Nicolas Le Maoût,Sandrine Thuillier ICEM 14 – 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. pp.08004, ⟨10.1051/epjconf/20100608004⟩ Communication dans un congrès hal-00717168v1
Mise en forme des matériaux métalliques par déformation plastique : influence du comportement matériel Pierre-Yves Manach,Sandrine Thuillier,Hervé Laurent,Nicolas Le Maoût,Renaud Grèze Colloque National de la Recherche en IUT CNRIUT 2008, May 2008, Lyon, France. pp.8 Communication dans un congrès hal-00269038v1
Experimental and numerical characterization of the surface defects of an automotive door A. Le Port,Sandrine Thuillier,Pierre-Yves Manach,J. Garabed 7th International Conference and Workshop on Numerical Simulation of 3D Sheet metal Forming Processes, Sep 2008, Interlaken, Switzerland. pp.773-778 Communication dans un congrès hal-00401472v1
Numerical simulation of the hemming process - Integration in the virtual design of automotive parts Nicolas Le Maoût,Sandrine Thuillier,Pierre-Yves Manach,O. Pauvert 7th International Conference and Workshop on Numerical Simulation of 3D Sheet metal Forming Processes Numisheet 2008, Sep 2008, Interlaken, Switzerland Communication dans un congrès hal-00404095v1
Experimental and numerical analysis of a two-stage deep drawing process involving strain path changes Sandrine Thuillier,Pierre-Yves Manach,L.F. Menezes International Conference on Advances in Materials and Processing Technologies, Nov 2008, Manama, Bahrain Communication dans un congrès hal-00404337v1
Modélisation micromécanique du comportement de composites à matrice polymère Sandrine Thuillier,Philippe Pilvin,Gilles Ausias,Thomas Parenteau,Yves Grohens Journée d'étude thématique SF2M Ouest, Mar 2008, Poitiers, France Communication dans un congrès hal-00400008v1
Influence of the temperature on residual stresses and springback effect in an aluminium alloy Pierre-Yves Manach,Renaud Grèze,Hervé Laurent,Sandrine Thuillier,L.F. Menezes Advances in Materials and Processing Technologies (AMPT2008), Nov 2008, Manama, Bahrain. ⟨10.1016/j.ijmecsci.2010.04.008⟩ Communication dans un congrès istex hal-00404052v1
Non-linear mechanical behaviour of carbon black reinforced elastomers : experiments and self-consistent model B. Omnès,Sandrine Thuillier,Philippe Pilvin,S. Gillet Third China-Europe Symposium on Processing and Properties of Reinforced Polymers, Jun 2007, Budapest, Hungary Communication dans un congrès hal-00404092v1
Approche multi-échelle du comportement des élastomères chargés B. Omnès,Philippe Pilvin,Sandrine Thuillier,S. Gillet 21ème colloque sur la Déformation des Polymères Solides DEPOS21, Oct 2007, Lille, France Communication dans un congrès hal-00404098v1
Non linear mechanical behaviour of carbon black filled natural rubber: modelling and finite element application B. Omnès,Sandrine Thuillier,Philippe Pilvin,S. Gillet 5th European Conference on Constitutive Models for Rubber, Sep 2007, Paris, France Communication dans un congrès hal-00404081v1
numerical simulation of flat-surface roll hemming : influence of geometry and material model Nicolas Le Maoût,S. Thuillier,P.Y. Manach,D. Debois,J.C Wadoux International deep drawing research group conference IDDRG, Jun 2009, Porto, Portugal. pp.226-233 Communication dans un congrès hal-00601014v1
Prise en compte de la phase d'emboutissage sur la simulation d'impact de dôme Vincent Grolleau,Bertrand Galpin,Gérard Rio,Sandrine Thuillier,Laurent Mahéo Sécurité dans le transport, Oct 2006, Bordeaux, France Communication dans un congrès hal-00402049v1
Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing S. Thuillier,J. Luís Alves,Luís Filipe Menezes,P.Y. Manach ADVANCED MATERIALS FORUM I, Portuguese Materials Society, Apr 2002, Virtual En ligne, Portugal. pp.549-554, ⟨10.4028/www.scientific.net/KEM.230-232.549⟩ Communication dans un congrès hal-04700399v1
Reverse Deep Drawing: Experimental and Numerical Simulation Results P.Y. Manach,Marta Oliveira,S. Thuillier,Luís Filipe Menezes ADVANCED MATERIALS FORUM I, Portuguese Materials Society, Apr 2002, Virtual En ligne, Portugal. pp.541-544, ⟨10.4028/www.scientific.net/KEM.230-232.541⟩ Communication dans un congrès hal-04700393v1

Brevet (1)

Device for measuring at least one physiological parameter Jean-Marc Goujon,Patrick Guyader,Sandrine Thuillier,Michel Billon,Henry L'Heret al. Patent n° : WO2008107238A1. 2008 Brevet hal-00481160v1

Autre publication scientifique (6)

Analysis, Simulation and Prediction of Cosmetic Defects on Automotive External Panel A. Le Port,Sandrine Thuillier,C. Borot,J. Charbonneaux,Aethra Automotive Systems 2011, ⟨10.1063/1.3623615⟩ Autre publication scientifique hal-00717573v1
Modélisation du comportement thermomécanique d'élastomères à différents degrés de réticulation Thomas Parenteau,P. Le Bideau,Sandrine Thuillier,Patrick Glouannec 2010 Autre publication scientifique hal-00718724v1
Caractérisation et prédiction de défauts d'aspect des ouvrants automobile A. Le Port,Sandrine Thuillier,Pierre-Yves Manach 2010 Autre publication scientifique hal-00717182v1
Surface defects on thin sheets after flanging A. Le Port,Sandrine Thuillier,Pierre-Yves Manach 2010 Autre publication scientifique hal-00717174v1
Experimental study of surface defects on automotive doors during flanging and their numerical prediction A. Le Port,Sandrine Thuillier,Pierre-Yves Manach 2010, ⟨10.1051/epjconf/20100615001⟩ Autre publication scientifique hal-00717161v1
Bending limit prediction of an aluminum alloy thin sheet Sandrine Thuillier,Nicolas Le Maoût,Pierre-Yves Manach 2010 Autre publication scientifique hal-00717159v1