Sébastien CHARLON Enseignant Chercheur

Identifiants chercheurs

IdHAL :

sebastien-charlon

ORCID :

0000-0002-7066-9303

IdRef :

189904798

ResearcherID :

http://www.researcherid.com/rid/J-6822-2015

Publications

Article dans une revue (22)

How impactful is die swell in material extrusion-based additive manufacturing of thermoplastic polymers? Trystan Domenech,Pierre Ovlaque,Yves Trolez,Dominique Olivier,Benjamin Bujeauet al. Progress in Additive Manufacturing, 2025, 10 (12), pp.11393-11404. ⟨10.1007/s40964-025-01293-0⟩ Article dans une revue hal-05266938v1
Unveiling the Amorphous Phase Contribution to Shear Piezoelectric Properties of Polylactide Hui Shen,Sébastien Charlon,Cédric Samuel Macromolecules, 2025, ⟨10.1021/acs.macromol.5c01023⟩ Article dans une revue hal-05176283v1
Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer Raphaël Côté,Dorian Delbergue,Vincent Demers,Nicole Demarquette,Sébastien Charlonet al. Progress in Additive Manufacturing, 2024, 10 (1), pp.409-425. ⟨10.1007/s40964-024-00632-x⟩ Article dans une revue hal-05190171v1
Competition between bead boundary fusion and crystallization kinetics in material extrusion-based additive manufacturing Trystan Domenech,Pierre Ovlaque,Yves Trolez,Dominique Olivier,Benjamin Bujeauet al. Additive Manufacturing, 2024, 92, pp.104395. ⟨10.1016/j.addma.2024.104395⟩ Article dans une revue hal-04819267v1
3D printed PLGA implants: APF DDM vs. FDM C. Bassand,L. Benabed,Sébastien Charlon,J. Verin,J. Freitaget al. Journal of Controlled Release, 2023, 353, pp.864-874. ⟨10.1016/j.jconrel.2022.11.052⟩ Article dans une revue hal-04301963v1
3D printed PLGA implants: How the filling density affects drug release C. Bassand,F. Siepmann,L. Benabed,J. Verin,J. Freitaget al. Journal of Controlled Release, 2023, Journal of Controlled Release, 363, pp.1-11. ⟨10.1016/j.jconrel.2023.09.020⟩ Article dans une revue hal-04301938v1
A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer Raphaël Côté,Vincent Demers,Nicole Demarquette,Sébastien Charlon,Jérémie Soulestin Additive Manufacturing, 2023, 68, pp.103509. ⟨10.1016/j.addma.2023.103509⟩ Article dans une revue hal-04301950v1
Effects of printed bead volume on thermal history, polymer degree of crystallinity and mechanical properties in large scale additive manufacturing L. Malagutti,Sébastien Charlon,V. Mazzanti,F. Mollica Journal of Materials Processing Technology, 2023, 316, pp.117961. ⟨10.1016/j.jmatprotec.2023.117961⟩ Article dans une revue hal-04301824v1
On the temperature evolution and related crystallinity of polypropylene parts processed via material extrusion Pierre Ovlaque,Marie Bayart,Jérémie Soulestin,Yves Trolez,Dominique Olivieret al. Additive Manufacturing, 2022, 58, pp.103065. ⟨10.1016/j.addma.2022.103065⟩ Article dans une revue hal-04301982v1
Pellet-Based Fused Filament Fabrication (FFF)-Derived Process for the Development of Polylactic Acid/Hydroxyapatite Scaffolds Dedicated to Bone Regeneration Marie Bayart,Marie Dubus,Sébastien Charlon,Halima Kerdjoudj,Nicolas Baleineet al. Materials, 2022, 15 (16), pp.5615. ⟨10.3390/ma15165615⟩ Article dans une revue hal-03772019v1
How does the temperature of polymer bead influence the kinetics of coalescence in additive manufacturing processes? Julien Le Boterff,Sébastien Charlon,Jérémie Soulestin Journal of Applied Polymer Science, 2021, 139 (11), ⟨10.1002/app.51782⟩ Article dans une revue hal-04302022v1
Fused filament fabrication of polypropylene: Influence of the bead temperature on adhesion and porosity Sébastien Charlon,Julien Le Boterff,Jérémie Soulestin Additive Manufacturing, 2021, 38, pp.101838. ⟨10.1016/j.addma.2021.101838⟩ Article dans une revue hal-03183421v1
Fused filament fabrication of scaffolds for tissue engineering; how realistic is shape-memory? A review Marie Bayart,Sébastien Charlon,Jérémie Soulestin Polymer, 2021, 217, pp.123440. ⟨10.1016/j.polymer.2021.123440⟩ Article dans une revue hal-03183431v1
Minimise thermo-mechanical batch variations when processing medical grade lactide based copolymers in additive manufacturing Astrid Ahlinder,Sebastien Charlon,Tiziana Fuoco,Jérémie Soulestin,Anna Finne-Wistrand Polymer Degradation and Stability, 2020, 181, pp.109372. ⟨10.1016/j.polymdegradstab.2020.109372⟩ Article dans une revue hal-03183434v1
Thermal and geometry impacts on the structure and mechanical properties of part produced by polymer additive manufacturing Sébastien Charlon,Jérémie Soulestin Journal of Applied Polymer Science, 2020, 137 (35), pp.49038. ⟨10.1002/app.49038⟩ Article dans une revue hal-03183420v1
Impression 3D de polymères semi-cristallins Sébastien Charlon,Jérémie Soulestin,Marie-France Lacrampe,Patricia Krawczak Plastiques et Caoutchouc Magazine, 2017, 942, pp.58-61 Article dans une revue hal-01773486v1
Influence of Crystallinity on the Dielectric Relaxations of Poly(Butylene Succinate) and Poly[(Butylene Succinate)- Co -(Butylene Adipate)] Sébastien Charlon,Laurent Delbreilh,Eric Dargent,Nadège Follain,Jérémie Soulestinet al. European Polymer Journal, 2016, 84, pp.366-376. ⟨10.1016/j.eurpolymj.2016.09.045⟩ Article dans une revue istex hal-01954223v1
Water Transport Properties of Poly(butylene succinate) and Poly[(butylene succinate)- co -(butylene adipate)] Nanocomposite Films: Influence of the Water-Assisted Extrusion Process Sébastien Charlon,Nadège Follain,Jérémie Soulestin,Michel Sclavons,Stéphane Marais Journal of Physical Chemistry C, 2016, 121 (1), pp.918-930. ⟨10.1021/acs.jpcc.6b11077⟩ Article dans une revue hal-02329121v1
Poly[(Butylene Succinate)- \emphCo -(Butylene Adipate)]-Montmorillonite Nanocomposites Prepared by Water-Assisted Extrusion: Role of the Dispersion Level and of the Structure-Microstructure on the Enhanced Barrier Properties Sébastien Charlon,Nadège Follain,Eric Dargent,Jérémie Soulestin,Michel Sclavonset al. Journal of Physical Chemistry C, 2016, 120 (24), pp.13234-13248. ⟨10.1021/acs.jpcc.6b00339⟩ Article dans une revue hal-01954228v1
Improvement of barrier properties of bio-based polyester nanocomposite membranes by water-assisted extrusion Sébastien Charlon,Nadège Follain,Corinne Chappey,Eric Dargent,Jérémie Soulestinet al. Journal of Membrane Science, 2015, 496, pp.185-198. ⟨10.1016/j.memsci.2015.08.043⟩ Article dans une revue istex hal-02329019v1
Structure–barrier property relationship of biodegradable poly(butylene succinate) and poly[(butylene succinate)-co-(butylene adipate)] nanocomposites: influence of the rigid amorphous fraction S. Charlon,S. Marais,E. Dargent,J. Soulestin,M. Sclavonset al. Physical Chemistry Chemical Physics, 2015, 17 (44), pp.29918-29934. ⟨10.1039/c5cp04969e⟩ Article dans une revue hal-02329037v1
Structure–barrier property relationship of biodegradable poly(butylene succinate) and poly[(butylene succinate)-co-(butylene adipate)] nanocomposites: influence of the rigid amorphous fraction Sébastien Charlon,S. Marais,E. Dargent,J. Soulestin,M. Sclavonset al. Physical Chemistry Chemical Physics, 2015, 17 (44), pp.29918-29934. ⟨10.1039/c5cp04969e⟩ Article dans une revue hal-04301991v1

Communication dans un congrès (7)

Industrial Production of Poly(L-Lactide) Piezoelectric Films: From Fundamental Process-Structure-Properties Relationships to Emerging Applications Hui Shen,Amulya Raj,Sébastien Charlon,Cédric Samuel European Polymer Congress 2025, Jun 2025, Groningen, Netherlands Communication dans un congrès hal-05589389v1
How the Competition Between Bead Boundary Coalescence and Crystallization Kinetics Drives Material Extrusion-Based Additive Manufacturing Processing Trystan Domenech,Pierre Ovlaque,Yves Trolez,Dominique Olivier,Benjamin Bujeauet al. ACS Spring 2025, Mar 2025, San Diego, CA, United States Communication dans un congrès hal-05151459v1
Industrial Production of Poly(L-Lactide) Piezoelectric Films: From Fundamental Process-Structure-Properties Relationships to Emerging Applications Hui Shen,Amulya Raj,Sébastien Charlon,Cédric Samuel Spring Meeting of the European Materials Research Society (E-MRS), May 2025, Strasboug, France Communication dans un congrès hal-05589385v1
How impactful is die swell in material extrusion-based additive manufacturing of thermoplastic polymers? Trystan Domenech,Pierre Ovlaque,Yves Trolez,Dominique Olivier,Benjamin Bujeauet al. Annual European Rheology Conference 2025, Apr 2025, Lyon, France Communication dans un congrès hal-05151478v1
Optimization of the UV stabilization of a plasticized PVC film for exterior automotive applications Hélène Delinière,Jacques Lefranc,Fabienne Deuzé,Laurent Darcheville,Jérémie Soulestinet al. PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, Cesme-Izmir, France. pp.020007, ⟨10.1063/1.5142922⟩ Communication dans un congrès hal-03183444v1
Freeformer technology, optimization of processing parameters Jeremie Soulestin,Sébastien Charlon,Marie-France Lacrampe,Patricia Krawczak Europolymer Conference EUPOC 2017 "Polymers and Additive Manufacturing: From Fundamentals to Applications", European Polymer Federation, May 2017, Gargano, Italy Communication dans un congrès hal-01782333v1
New opportunities offered by Freeformer 3D printing process Sébastien Charlon,Jeremie Soulestin,Marie-France Lacrampe,Patricia Krawczak 32nd Annual Meeting of Polymer Processing Society (PPS-32), Jul 2016, Lyon, France Communication dans un congrès hal-01779762v1