Sihao DENG Professeur des Universités

Identifiants chercheurs

IdHAL :

sihao-deng

ORCID :

0000-0003-0307-4550

ResearcherID :

C-8175-2018

Publications

Article dans une revue (70)

Quantum dot-enhanced Co3O4/TiO2 type-II heterojunction chemiresistor for efficient 3-octanone monitoring in wheat mildew identification Kaichun Xu,Kaidi Wu,Zichen Zheng,Marie-Pierre Planche,Sihao Denget al. Sensors and Actuators B: Chemical, 2026, 451, pp.139385. ⟨10.1016/j.snb.2025.139385⟩ Article dans une revue hal-05495379v1
Co-MOF-derived Co3O4 sensors for efficient 3-octanone biomarker monitoring in wheat mildew Kaichun Xu,Kaidi Wu,Jinyong Xu,Mengjie Han,Zichen Zhenget al. Talanta, 2025, 291, pp.127892. ⟨10.1016/j.talanta.2025.127892⟩ Article dans une revue hal-05495536v1
Revolutionizing Repair and Production: An Integrated Modular Cold Spray Additive Manufacturing System Wenbo Li,Hongjian Wu,Fei Huang,Hanlin Liao,Sihao Deng Journal of Thermal Spray Technology, 2025, 34 (2-3), pp.531-549. ⟨10.1007/s11666-025-01943-3⟩ Article dans une revue hal-05507746v1
Cold Spray Additive Manufacturing as a Sustainable Route for FeNi-Based Ferromagnetic Alloy Production Hassan Hammouda,Sabeur Msolli,Nouredine Fenineche,Hanlin Liao,Sihao Deng Journal of Thermal Spray Technology, 2025, 34 (8), pp.3134-3160. ⟨10.1007/s11666-025-02094-1⟩ Article dans une revue hal-05495516v1
Metal oxide semiconductor-based heterojunctions synthesized by wet-chemical strategies for efficient volatile organic compounds detection Kaichun Xu,Kaidi Wu,Jinyong Xu,Marie-Pierre Planche,Sihao Denget al. Coordination Chemistry Reviews, 2025, 538, pp.216735. ⟨10.1016/j.ccr.2025.216735⟩ Article dans une revue hal-05495527v1
Outlook of Industry 4.0 Integrated Technologies in Thermal Spray Processes and Applications Wenbo Li,Hongjian Wu,Xin Chu,Yingchun Xie,Sihao Denget al. Journal of Thermal Spray Technology, 2025, 34 (8), pp.3022-3051. ⟨10.1007/s11666-025-02096-z⟩ Article dans une revue hal-05495406v1
Comparison and Porosity Prediction Modeling of SPS Coatings Fabricated via Conventional and Cascaded Torches Zhoukun Shi,Shaowu Liu,Marie-Pierre Planche,Geoffrey Darut,Sihao Denget al. Journal of Thermal Spray Technology, 2025, ⟨10.1007/s11666-025-02116-y⟩ Article dans une revue hal-05495393v1
Hybrid cold spray additive-subtractive manufacturing with adaptive path planning for autonomous repair of complex geometrical defects Wenbo Li,Fei Huang,Shaowu Liu,Hongjian Wu,Xin Chuet al. Journal of Manufacturing Processes, 2025, 152, pp.1037-1050. ⟨10.1016/j.jmapro.2025.08.064⟩ Article dans une revue hal-05495455v1
A Three-Dimensional Damaged Region Contour Extraction Approach for Cold Spray Repair Fei Huang,Wenbo Li,Rija Nirina Raoelison,Christophe Verdy,Hanlin Liaoet al. Journal of Thermal Spray Technology, 2024, 33 (4), pp.858-868. ⟨10.1007/s11666-024-01754-y⟩ Article dans une revue hal-05507773v1
Additive manufacturing of Al thick wall using high-pressure cold spraying: issues of porosity and mechanical properties Mohamed Sokore,Wembo Li,Hongjian Wu,Sihao Deng,Hanlin Liaoet al. International Journal of Advanced Manufacturing Technology, 2024, 132 (7-8), pp.3389-3413. ⟨10.1007/s00170-024-13528-5⟩ Article dans une revue hal-05507753v1
3D volume construction methodology for cold spray additive manufacturing Hongjian Wu,Wenbo Li,Marcel Lewke,Sihao Deng,Alexander Listet al. Additive Manufacturing, 2024, 92, pp.104407. ⟨10.1016/j.addma.2024.104407⟩ Article dans une revue hal-05507750v1
Hierarchical microporous Ni-based electrodes enable “Two Birds with One Stone” in highly efficient and robust anion exchange membrane water electrolysis (AEMWE) Xinge Jiang,Vasileios Kyriakou,Botong Wang,Sihao Deng,Sophie Costilet al. Chemical Engineering Journal, 2024, 486, pp.150180. ⟨10.1016/j.cej.2024.150180⟩ Article dans une revue hal-05507768v1
Study of Low-Pressure Cold Spray Additive Manufacturing: Investigation of Kinematic Spray Parameters on Deposition and Properties Wenbo Li,Hongjian Wu,Christophe Verdy,Sophie Costil,Hanlin Liaoet al. 3D Printing and Additive Manufacturing, 2023, 10 (6), pp.1260-1271. ⟨10.1089/3dp.2021.0260⟩ Article dans une revue hal-05507782v1
Base shape generation and optimization for multi-axis hybrid additive manufacturing Zhiping Wang,Zhen Hong,Sihao Deng,Yicha Zhang,Alain Bernard Materials Science in Additive Manufacturing, 2023, 2 (4), pp.2103. ⟨10.36922/msam.2103⟩ Article dans une revue hal-04530463v1
Generic implementation of path design for spray deposition: Programming schemes, processing and characterization for cold spraying Hongjian Wu,Shaowu Liu,Wenbo Li,Marcel Lewke,Rija Raoelisonet al. Surface and Coatings Technology, 2023, 458, pp.129368. ⟨10.1016/j.surfcoat.2023.129368⟩ Article dans une revue hal-05507831v1
General-purpose numerical deposition modeling methodology based on mesh geometry reconstruction strategy in cold spray additive manufacturing system Wenbo Li,Hongjian Wu,Mohamed Sokore,Rija Nirina Raoelison,Hanlin Liaoet al. Surface and Coatings Technology, 2023, 464, pp.129563. ⟨10.1016/j.surfcoat.2023.129563⟩ Article dans une revue hal-05507785v1
Spray Trajectory Planning for Complex Structural Components in Robotized Cold Spray Additive Manufacturing Wenbo Li,Yijun Yao,Hongjian Wu,Hanlin Liao,Sophie Costilet al. Journal of Thermal Spray Technology, 2023, 33 (1), pp.71-87. ⟨10.1007/s11666-023-01696-x⟩ Article dans une revue hal-05507774v1
Application of Image Segmentation to Identify In-flight Particles in Thermal Spraying Yijun Yao,Shaowu Liu,Marie Pierre Planche,Sihao Deng,Hanlin Liao Journal of Thermal Spray Technology, 2022, 31 (1-2), pp.46-58. ⟨10.1007/s11666-021-01285-w⟩ Article dans une revue hal-05507853v1
Heat treatment induced microstructural evolution, oxidation behavior and tribological properties of Fe-12Cr-9Ni-2Al steel (CX steel) prepared using selective laser melting Cheng Chang,Xingchen Yan,Zhaoyang Deng,Bingwen Lu,Rodolphe Bolotet al. Surface and Coatings Technology, 2022, 429, pp.127982. ⟨10.1016/j.surfcoat.2021.127982⟩ Article dans une revue hal-03624654v1
Bonding behavior of Bi-metal-deposits produced by hybrid cold spray additive manufacturing Hongjian Wu,Xinliang Xie,Shaowu Liu,Shiming Xie,Renzhong Huanget al. Journal of Materials Processing Technology, 2022, 299, pp.117375. ⟨10.1016/j.jmatprotec.2021.117375⟩ Article dans une revue hal-05507855v1
A framework for a knowledge based cold spray repairing system Hongjian Wu,Shaowu Liu,Xinliang Xie,Yicha Zhang,Hanlin Liaoet al. Journal of Intelligent Manufacturing, 2021, 33 (6), pp.1639-1647. ⟨10.1007/s10845-021-01770-7⟩ Article dans une revue hal-05507839v1
Effect of heat treatment on residual stress and wear resistance of CX stainless steel manufactured by Selective Laser Melting Cheng Chang,Xingchen Yan,Zhaoyang Deng,Qingkun Chu,Sihao Denget al. Procedia CIRP, 2021, 104, pp.738-743. ⟨10.1016/j.procir.2021.11.124⟩ Article dans une revue hal-03624693v2
Selective laser melting (SLM) of CX stainless steel: Theoretical calculation, process optimization and strengthening mechanism Dongdong Dong,Cheng Chang,Hao Wang,Xingchen Yan,Wenyou Maet al. Journal of Materials Science and Technology, 2021, 73, pp.151-164. ⟨10.1016/j.jmst.2020.09.031⟩ Article dans une revue hal-03624657v1
New Process Implementation to Enhance Cold Spray-Based Additive Manufacturing Hongjian Wu,Shaowu Liu,Yicha Zhang,Hanlin Liao,Rija-Nirina Raoelisonet al. Journal of Thermal Spray Technology, 2021, 30 (5), pp.1284-1293. ⟨10.1007/s11666-021-01205-y⟩ Article dans une revue hal-05507889v1
Implementation of Artificial Neural Networks for Forecasting the HVOF Spray Process and HVOF Sprayed Coatings Meimei Liu,Zexin Yu,Hongjian Wu,Hanlin Liao,Qixin Zhuet al. Journal of Thermal Spray Technology, 2021, 30 (5), pp.1329-1343. ⟨10.1007/s11666-021-01213-y⟩ Article dans une revue hal-05507888v1
Effect of heat treatment on residual stress and wear resistance of CX stainless steel manufactured by Selective Laser Melting Cheng Chang,Xingchen Yan,Zhaoyang Deng,Qingkun Chu,Sihao Denget al. Procedia CIRP, 2021, 104, pp.738-743. ⟨10.1016/j.procir.2021.11.124⟩ Article dans une revue hal-05507910v1
Description and Prediction of Multi-layer Profile in Cold Spray Using Artificial Neural Networks Meimei Liu,Hongjian Wu,Zexin Yu,Hanlin Liao,Sihao Deng Journal of Thermal Spray Technology, 2021, 30 (6), pp.1453-1463. ⟨10.1007/s11666-021-01212-z⟩ Article dans une revue hal-05507883v1
Influence of spray trajectories on characteristics of cold-sprayed copper deposits Hongjian Wu,Chunjie Huang,Xinliang Xie,Shaowu Liu,Tao Wuet al. Surface and Coatings Technology, 2021, 405, pp.126703. ⟨10.1016/j.surfcoat.2020.126703⟩ Article dans une revue hal-05507893v1
Selective laser melting (SLM) of CX stainless steel: Theoretical calculation, process optimization and strengthening mechanism Dongdong Dong,Cheng Chang,Hao Wang,Xingchen Yan,Wenyou Maet al. Journal of Materials Science and Technology, 2021, 73, pp.151-164. ⟨10.1016/j.jmst.2020.09.031⟩ Article dans une revue hal-05507913v1
Stable layer-building strategy to enhance cold-spray-based additive manufacturing Hongjian Wu,Xinliang Xie,Meimei Liu,Christophe Verdy,Yicha Zhanget al. Additive Manufacturing, 2020, 35, pp.101356. ⟨10.1016/j.addma.2020.101356⟩ Article dans une revue hal-05507895v1
Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting Cheng Chang,Xingchen Yan,Rodolphe Bolot,Julien Gardan,Shuohong Gaoet al. Journal of Materials Science, 2020, 55 (19), pp.8303-8316. ⟨10.1007/s10853-020-04566-x⟩ Article dans une revue hal-05507905v1
Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting Cheng Chang,Xingchen Yan,Rodolphe Bolot,Julien Gardan,Shuohong Gaoet al. Journal of Materials Science, 2020, 55, pp.8303. ⟨10.1007/s10853-020-04566-x⟩ Article dans une revue hal-02514835v1
A new approach to simulate coating thickness in cold spray Hongjian Wu,Xinliang Xie,Meimei Liu,Chaoyue Chen,Hanlin Liaoet al. Surface and Coatings Technology, 2020, 382, pp.125151 -. ⟨10.1016/j.surfcoat.2019.125151⟩ Article dans une revue hal-03488679v1
A new approach to simulate coating thickness in cold spray Hongjian Wu,Xinliang Xie,Meimei Liu,Chaoyue Chen,Hanlin Liaoet al. Surface and Coatings Technology, 2020, 382, pp.125151. ⟨10.1016/j.surfcoat.2019.125151⟩ Article dans une revue hal-05507903v1
Microstructure and mechanical deformation behavior of selective laser melted Ti6Al4V ELI alloy porous structures Cheng Chang,Jian Huang,Xingchen Yan,Qing Li,Min Liuet al. Materials Letters, 2020, 277, pp.128366. ⟨10.1016/j.matlet.2020.128366⟩ Article dans une revue hal-05507909v1
Stable layer-building strategy to enhance cold-spray-based additive manufacturing Hongjian Wu,Xinliang Xie,Meimei Liu,Christophe Verdy,Yicha Zhanget al. Additive Manufacturing, 2020, 35, pp.101356 -. ⟨10.1016/j.addma.2020.101356⟩ Article dans une revue hal-03491070v1
Grey modeling for thermal spray processing parameter analysis Meimei Liu,Yicha Zhang,Wenjie Dong,Zexin Yu,Sifeng Liuet al. Grey Systems: Theory and Application, 2020, IFIP Advances in Information and Communication Technology, 10 (3), pp.265-279. ⟨10.1108/GS-12-2019-0063⟩ Article dans une revue hal-05507900v1
Microstructure and mechanical deformation behavior of selective laser melted Ti6Al4V ELI alloy porous structures Cheng Chang,Jian Huang,Xingchen Yan,Qing Li,Min Liuet al. Materials Letters, 2020, 277, pp.128366. ⟨10.1016/j.matlet.2020.128366⟩ Article dans une revue hal-03624673v1
Hyperparameter Optimization for Machine Learning Models Based on Bayesian Optimization Jia Wu,Xiu-Yun Chen,Hao Zhang,Li-Dong Xiong,Hang Leiet al. Journal of Electronic Science and Technology, 2019, 17 (1), pp.26-40. ⟨10.11989/JEST.1674-862X.80904120⟩ Article dans une revue hal-05507953v1
Prediction and analysis of high velocity oxy fuel (HVOF) sprayed coating using artiﬁcial neural network Meimei Liu,Zexin Yu,Yicha Zhang,Hongjian Wu,Hanlin Liaoet al. Surface and Coatings Technology, 2019, 378, pp.124988 -. ⟨10.1016/j.surfcoat.2019.124988⟩ Article dans une revue hal-03488674v1
Effects of substrate heat accumulation on the cold sprayed Ni coating quality: Microstructure evolution and tribological performance Chaoyue Chen,Yingchun Xie,Xinliang Xie,Xingchen Yan,Renzhong Huanget al. Surface and Coatings Technology, 2019, 371, pp.185 - 193. ⟨10.1016/j.surfcoat.2019.04.090⟩ Article dans une revue hal-03485870v1
A spherical surface coating thickness model for a robotized thermal spray system Yanjun Zhang,Wenbo Li,Chao Zhang,Hanlin Liao,Yicha Zhanget al. Robotics and Computer-Integrated Manufacturing, 2019, 59, pp.297-304. ⟨10.1016/j.rcim.2019.05.003⟩ Article dans une revue istex hal-05507918v1
Prediction and analysis of high velocity oxy fuel (HVOF) sprayed coating using artiﬁcial neural network Meimei Liu,Zexin Yu,Yicha Zhang,Hongjian Wu,Hanlin Liaoet al. Surface and Coatings Technology, 2019, 378, pp.124988. ⟨10.1016/j.surfcoat.2019.124988⟩ Article dans une revue hal-05507916v1
Strengthened Peening Effect on Metallurgical Bonding Formation in Cold Spray Additive Manufacturing Yingchun Xie,Chaoyue Chen,Marie-Pierre Planche,Sihao Deng,Renzhong Huanget al. Journal of Thermal Spray Technology, 2019, 28 (4), pp.769-779. ⟨10.1007/s11666-019-00854-4⟩ Article dans une revue hal-05507921v1
Effects of substrate heat accumulation on the cold sprayed Ni coating quality: Microstructure evolution and tribological performance Chaoyue Chen,Yingchun Xie,Xinliang Xie,Xingchen Yan,Renzhong Huanget al. Surface and Coatings Technology, 2019, 371, pp.185-193. ⟨10.1016/j.surfcoat.2019.04.090⟩ Article dans une revue hal-05507919v1
Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property Chaoyue Chen,Xinliang Xie,Yingchun Xie,Marie-Pierre Planche,Sihao Denget al. Materials & Design, 2018, 160, pp.270-283. ⟨10.1016/j.matdes.2018.09.025⟩ Article dans une revue hal-05507956v1
Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property Chao Yue Chen,Xin Liang Xie,Ying Chun Xie,Marie-Pierre Planche,Sihao Denget al. Materials & Design, 2018, Materials & Design, 160, pp.270-283. ⟨10.1016/j.matdes.2018.09.025⟩ Article dans une revue hal-02318850v1
Metallization of polyether ether ketone (PEEK) by copper coating via cold spray Chaoyue Chen,Xinliang Xie,Yingchun Xie,Xincheng Yan,Chunjie Huanget al. Surface and Coatings Technology, 2018, 342, pp.209-219. ⟨10.1016/j.surfcoat.2018.02.087⟩ Article dans une revue istex hal-05507958v1
On the role of oxide film’s cleaning effect into the metallurgical bonding during cold spray Chaoyue Chen,Yingchun Xie,Renzhong Huang,Sihao Deng,Zhongming Renet al. Materials Letters, 2018, 210, pp.199-202. ⟨10.1016/j.matlet.2017.09.024⟩ Article dans une revue istex hal-05508016v1
Effect of spray angle on Ni particle deposition behaviour in cold spray Yingchun Xie,Chaoyue Chen,Marie-Pierre Planche,Sihao Deng,Hanlin Liao Surface Engineering, 2018, 34 (5), pp.352-360. ⟨10.1080/02670844.2017.1312221⟩ Article dans une revue hal-05508014v1
A novel spiral trajectory for damage component recovery with cold spray Chaoyue Chen,Sébastien Gojon,Yingchun Xie,Shuo Yin,Christophe Verdyet al. Surface and Coatings Technology, 2017, 309, pp.719-728. ⟨10.1016/j.surfcoat.2016.10.096⟩ Article dans une revue istex hal-05508023v1
A feasible strategy to balance the crystallinity and specific surface area of metal oxide nanocrystals Q. Zhang,X. Xu,Y. Liu,M. Xu,S. Denget al. Scientific Reports, 2017, 7 (1), pp.46424. ⟨10.1038/srep46424⟩ Article dans une revue hal-05508022v1
Modelling of coating thickness distribution and its application in offline programming software C. Chen,Y. Xie,C. Verdy,H. Liao,S. Deng Surface and Coatings Technology, 2017, 318, pp.315-325. ⟨10.1016/j.surfcoat.2016.10.044⟩ Article dans une revue istex hal-05508021v1
Enhancement of mechanical, tribological and morphological properties of nitrogenated diamond-like carbon films by gradient nitrogen doping Chen Zeng,Qingyun Chen,Ming Xu,Sihao Deng,Yu Luoet al. Diamond and Related Materials, 2017, 76, pp.132-140. ⟨10.1016/j.diamond.2017.05.004⟩ Article dans une revue istex hal-05508020v1
Numerical investigation of transient coating build-up and heat transfer in cold spray Chaoyue Chen,Yingchun Xie,Christophe Verdy,Renzhong Huang,Hanlin Liaoet al. Surface and Coatings Technology, 2017, 326, pp.355-365. ⟨10.1016/j.surfcoat.2017.07.069⟩ Article dans une revue istex hal-05508017v1
Nozzle Mounting Method Optimization Based on Robot Kinematic Analysis Chaoyue Chen,Hanlin Liao,Ghislain Montavon,Sihao Deng Journal of Thermal Spray Technology, 2016, 25 (6), pp.1138-1148. ⟨10.1007/s11666-016-0429-1⟩ Article dans une revue hal-05508024v1
Evaluation of the interfacial bonding between particles and substrate in angular cold spray Chaoyue Chen,Yingchun Xie,Shuo Yin,Marie-Pierre Planche,Sihao Denget al. Materials Letters, 2016, 173, pp.76-79. ⟨10.1016/j.matlet.2016.03.036⟩ Article dans une revue istex hal-05508025v1
Study of the particle behavior in a pulsed arc Xiaohua Feng,Marie-Pierre Planche,Sihao Deng,Hanlin Liao,Hervé Rabatet al. Surface and Coatings Technology, 2016, 287, pp.113-118. ⟨10.1016/j.surfcoat.2015.12.020⟩ Article dans une revue istex hal-01319273v1
Development of an Emulator for the Plasma Process Control Marie-Pierre Planche,Taikai Liu,S. Deng,Ghislain Montavon Journal of Mechanics Engineering and Automation, 2015, 5 (1), ⟨10.17265/2159-5275/2015.01.002⟩ Article dans une revue hal-05508047v1
Computer-Aided Robot Trajectory Auto-generation Strategy in Thermal Spraying Zhenhua Cai,Hong Liang,Shuhai Quan,Sihao Deng,Chunnian Zenget al. Journal of Thermal Spray Technology, 2015, 24 (7), pp.1235-1245. ⟨10.1007/s11666-015-0282-7⟩ Article dans une revue hal-05508032v1
Estimating the behavior of particles sprayed by a single-cathode plasma torch based on a nonlinear autoregressive exogenous model T. Liu,S. Deng,M.-P. Planche,G. Montavon Surface and Coatings Technology, 2015, 268, pp.284-292. ⟨10.1016/j.surfcoat.2014.10.040⟩ Article dans une revue istex hal-05508036v1
Kinematic Optimization of Robot Trajectories for Thermal Spray Coating Application Sihao Deng,Hong Liang,Zhenhua Cai,Hanlin Liao,Ghislain Montavon Journal of Thermal Spray Technology, 2014, 23 (8), pp.1382-1389. ⟨10.1007/s11666-014-0137-7⟩ Article dans une revue hal-05508037v1
Microstructure and tensile properties of iron parts fabricated by selective laser melting Bo Song,Shujuan Dong,Sihao Deng,Hanlin Liao,Christian Coddet Optics and Laser Technology, 2014, 56, pp.451-460. ⟨10.1016/j.optlastec.2013.09.017⟩ Article dans une revue istex hal-05508040v1
A Coupled Model Between Robot Trajectories and Thermal History of the Workpiece During Thermal Spray Operation Rodolphe Bolot,Sihao Deng,Zhenhua Cai,Hanlin Liao,Ghislain Montavon Journal of Thermal Spray Technology, 2014, 23 (3), pp.296-303. ⟨10.1007/s11666-013-0048-z⟩ Article dans une revue hal-04149853v1
Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence T. Liu,M. Planche,A. Kanta,S. Deng,G. Montavonet al. Plasma Chemistry and Plasma Processing, 2013, 33 (5), pp.1025-1041. ⟨10.1007/s11090-013-9475-3⟩ Article dans une revue istex hal-05508048v1
The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process Zhenhua Cai,Sihao Deng,Hanlin Liao,Chunnian Zeng,Ghislain Montavon Journal of Thermal Spray Technology, 2013, 23 (3), pp.354-362. ⟨10.1007/s11666-013-0002-0⟩ Article dans une revue hal-05508043v1
A Coupled Model Between Robot Trajectories and Thermal History of the Workpiece During Thermal Spray Operation Rodolphe Bolot,Sihao Deng,Zhenhua Cai,Hanlin Liao,Ghislain Montavon Journal of Thermal Spray Technology, 2013, 23 (3), pp.296-303. ⟨10.1007/s11666-013-0048-z⟩ Article dans une revue hal-05508042v1
Application of External Axis in Robot-Assisted Thermal Spraying Sihao Deng,Dandan Fang,Zhenhua Cai,Hanlin Liao,Ghislain Montavon Journal of Thermal Spray Technology, 2012, 21 (6), pp.1203-1215. ⟨10.1007/s11666-012-9818-2⟩ Article dans une revue istex hal-05508052v1
Application of robot offline programming in thermal spraying Sihao Deng,Zhenhua Cai,Dandan Fang,Hanlin Liao,Ghislain Montavon Surface and Coatings Technology, 2012, 206 (19-20), pp.3875-3882. ⟨10.1016/j.surfcoat.2012.03.038⟩ Article dans une revue istex hal-05508053v1
The Effect of Robot Kinematics on the Coating Thickness Uniformity D. Fang,S. Deng,H. Liao,C. Coddet Journal of Thermal Spray Technology, 2010, 19 (4), pp.796-804. ⟨10.1007/s11666-010-9470-7⟩ Article dans une revue istex hal-05508060v1

Communication dans un congrès (2)

Physical Deposition Profile Based Toolpath Generation and Optimization for Additive Volume Building in Hybrid Additive Manufacturing Zhen Hong,Zhiping Wang,Sihao Deng,Yicha Zhang,Alain Bernard Proceedings 2021 Annual International Solid Freeform Fabrication Symposium, Aug 2021, Vitual Event, United States Communication dans un congrès hal-03531354v1
Towards a Knowledge-Based Design Methodology for Modular Robotic System Lucas Jimenez,Frédéric Demoly,Sihao Deng,Samuel Gomes 17th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2020, Rapperswil, Switzerland. pp.50-58, ⟨10.1007/978-3-030-62807-9_5⟩ Communication dans un congrès hal-03753131v1

Proceedings/Recueil des communications (34)

A Digital Twins Framework for Managing Building Environmental Parameters Sidi Mohammed Yelles Chaouche,Samuel Gomes,Sebti Foufou,Sihao Deng,Rui Wang Product Lifecycle Management. PLM in the Age of Model-Based Engineering in Industry, Jul 2025, Seville, Spain. 772, Springer Nature Switzerland, pp.129-138, 2026, IFIP Advances in Information and Communication Technology, ⟨10.1007/978-3-032-09700-2_13⟩ Proceedings/Recueil des communications hal-05495556v1
Magnetic Performance and Microstructural Characterization of Cold Sprayed Ferromagnetic Materials Hassan Hammouda,Sabeur Msolli,Nouredine Fenineche,Hanlin Liao,Olivier Marconotet al. ITSC 2025, May 2025, Vancouver, Canada. pp.87-92, 2025, ⟨10.31399/asm.cp.itsc2025p0087⟩ Proceedings/Recueil des communications hal-05507739v1
Towards an Integrated Modular Cold Spray Additive Manufacturing System Wenbo Li,Hongjian Wu,Shaowu Liu,Hanlin Liao,Sophie Costilet al. ITSC 2024, Apr 2024, Milan, France. pp.469-482, 2024, ⟨10.31399/asm.cp.itsc2024p0469⟩ Proceedings/Recueil des communications hal-05507765v1
Heat Treatment Effects on Structural and Mechanical Features of Cold Sprayed 3D Aluminium Part Mohamed Sokore,Sihao Deng,Hanlin Liao,Rija Nirina Raoelison ITSC 2024, Apr 2024, Milan, France. pp.724-731, 2024, ⟨10.31399/asm.cp.itsc2024p0724⟩ Proceedings/Recueil des communications hal-05507760v1
Investigation of the Pore Formation during the Cold Spray Additive Manufacturing of a Bulk Aluminum Part Mohamed Sokore,Sihao Deng,Hanlin Liao,Rija Nirina Raoelison ITSC 2024, Apr 2024, Milan, France. pp.743-750, 2024, ⟨10.31399/asm.cp.itsc2024p0743⟩ Proceedings/Recueil des communications hal-05507757v1
Property Characterization of Al1050 Bulk Cold Spray Deposits and Numerical Study of Thermomechanical Effects during the Additive Growth Mohamed Sokore,Sihao Deng,Hanlin Liao,Rija Nrina Raoelison,Shuohong Gao ITSC 2023, May 2023, Québec City, France. pp.167-172, 2023, ⟨10.31399/asm.cp.itsc2023p0167⟩ Proceedings/Recueil des communications hal-05507796v1
Methods for 3D Volume Building in Cold Spray Additive Manufacturing Hongjian Wu,Alexander List,Frank Gärtner,Thomas Klassen,Sihao Deng ITSC 2023, May 2023, Québec City, France. pp.193-199, 2023, ⟨10.31399/asm.cp.itsc2023p0193⟩ Proceedings/Recueil des communications hal-05507791v1
Application of In Situ Observation Techniques for Understanding the Principles of the Cold Spray Coating Formation Yijun Yao,Wenbo Li,Zhoukun Shi,Marie-Pierre Planche,Hanlin Liaoet al. ITSC 2023, May 2023, Québec City, France. pp.98-103, 2023, ⟨10.31399/asm.cp.itsc2023p0098⟩ Proceedings/Recueil des communications hal-05507789v1
A Concept of Aerospike Nozzle for Cold Spray Additive Manufacturing—Towards a Potential Solution for Preventing the Issue of Clogging Rija Nrina Raoelison,Sabeur Msolli,Sihao Deng,Ashish Vashishtha,Amit Sharmaet al. ITSC 2023, May 2023, Québec City, Canada. pp.229-234, 2023, ⟨10.31399/asm.cp.itsc2023p0229⟩ Proceedings/Recueil des communications hal-05507798v1
Towards a General Cold Spray Additive Manufacturing Framework for Fabricating Complex Structural Components Wenbo Li,Hongjian Wu,Zhoukun Shi,Hanlin Liao,Sophie Costilet al. ITSC 2023, May 2023, Québec City, France. pp.155-160, 2023, ⟨10.31399/asm.cp.itsc2023p0155⟩ Proceedings/Recueil des communications hal-05507824v1
Development of Robotized Spraying Trajectory of Multi-Featured Parts in Cold Spray Additive Manufacturing System W. Li,Y. Yao,H. Wu,S. Deng,H. Liaoet al. ITSC2022, May 2022, Vienna, France. pp.160-163, 2022, ⟨10.31399/asm.cp.itsc2022p0160⟩ Proceedings/Recueil des communications hal-05507845v1
Strategies and Analyses for Robot Trajectory Optimization in Thermal and Kinetic Spraying H. Wu,S. Liu,M. Lewke,W. Li,R.-N. Raoelisonet al. ITSC2022, May 2022, Vienna, France. pp.299-305, 2022, ⟨10.31399/asm.cp.itsc2022p0299⟩ Proceedings/Recueil des communications hal-05507840v1
Toolpath Planning for Cold Spray Additive Manufacturing Hongjian Wu,Mohamed Sokore,Wenbo Li,Rija-Nirina Raoelison,Hanlin Liaoet al. 2nd International Conference on Advanced Surface Enhancement, Aug 2021, ONLINE, France. Springer Singapore, pp.240-243, 2022, Lecture Notes in Mechanical Engineering, ⟨10.1007/978-981-16-5763-4_53⟩ Proceedings/Recueil des communications hal-05507877v1
Perspective of 3D Near-Net-Shape Additive Manufacturing by Cold Spraying: An Empirical Study Using Pure Al Powders M. Sokore,H. Wu,W. Li,R.-N. Raoelison,S. Denget al. ITSC2022, May 2022, Vienna, France. pp.306-313, 2022, ⟨10.31399/asm.cp.itsc2022p0306⟩ Proceedings/Recueil des communications hal-05507848v1
Method for Identifying In-Flight Particles based on Digital Image Technologies in Thermal Spraying Yijun Yao,Shaowu Liu,Marie-Pierre Planche,Sihao Deng,Hanlin Liao ITSC2021, May 2021, Virtual, France. pp.664-675, 2021, ⟨10.31399/asm.cp.itsc2021p0664⟩ Proceedings/Recueil des communications hal-05507886v1
Artificial Intelligent Aided Analysis and Prediction of High-Velocity Oxyfuel (HVOF) Sprayed Cr3C2-25NiCr Coatings Meimei Liu,Zexin Yu,Hongjian Wu,Sihao Deng,Yicha Zhanget al. ITSC2019, May 2019, Yokohama, France. pp.158-164, 2019, ⟨10.31399/asm.cp.itsc2019p0158⟩ Proceedings/Recueil des communications hal-05507920v1
Investigation of Particle/Substrate Bonding Between Copper Powder and Different Substrates in Cold Spray Chaoyue Chen,Yingchun Xie,Xinliang Xie,Sihao Deng,Hanlin Liaoet al. ITSC2018, May 2018, Orlando, France. pp.262-269, 2018, ⟨10.31399/asm.cp.itsc2018p0262⟩ Proceedings/Recueil des communications hal-05508013v1
Transient Coating Buildup and Thermal Analysis of Cold Spray Process by Finite Element Modelling C. Chen,Y. Xie,C. Verdy,H. Liao,S. Denget al. ITSC 2017, Jun 2017, Düsseldorf, France. pp.1086-1091, 2017, ⟨10.31399/asm.cp.itsc2017p1086⟩ Proceedings/Recueil des communications hal-05508019v1
Modelling of Coating Profile in Cold Spray and its Application in Offline Programming Software C. Chen,Y. Xie,S. Deng,C. Verdy,H. Liao ITSC 2016, May 2016, Shanghai, France. pp.327-332, 2016, ⟨10.31399/asm.cp.itsc2016p0327⟩ Proceedings/Recueil des communications hal-05508028v1
Adaptation of the object recognition method based on random ferns for mobile robots Liang Hong,Fan Xu,Yanlin Ji,Sihao Deng,Chunnian Zeng 2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA), Jun 2016, Hefei, France. IEEE, pp.579-584, 2016, ⟨10.1109/ICIEA.2016.7603651⟩ Proceedings/Recueil des communications hal-05508026v1
A fast object segmentation method for mobile robots based on improved depth information Hong Liang,Fan Xu,Yanlin Ji,Chengpeng Du,Sihao Denget al. 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO), Dec 2015, Zhuhai, France. IEEE, pp.1121-1126, 2015, ⟨10.1109/ROBIO.2015.7418922⟩ Proceedings/Recueil des communications hal-05508030v1
Robot Kinematic Analysis for Torch Setup Optimization in Thermal Spraying Chaoyue Chen,Sihao Deng,Hanlin Liao,Ghislain Montavon ITSC2015, May 2015, Long Beach, France. pp.647-653, 2015, ⟨10.31399/asm.cp.itsc2015p0647⟩ Proceedings/Recueil des communications hal-05508035v1
Optimization of an Emulator Based on Nonlinear Auto Regressive Model with Exogenous Inputs for an Atmospheric Plasma Spray Torch T. Liu,M.-P. Planche,S. Deng,G. Montavon ITSC 2014, May 2014, Barcelona, France. pp.37-42, 2014, ⟨10.31399/asm.cp.itsc2014p0037⟩ Proceedings/Recueil des communications hal-05508039v1
Depicting the Behavior of a Mono-Cathode Plasma Spray Torch with an Emulator T. Liu,S. Deng,M.-P. Planche,G. Montavon ITSC2013, May 2013, Busan, France. pp.365-376, 2013, ⟨10.31399/asm.cp.itsc2013p0365⟩ Proceedings/Recueil des communications hal-05508050v1
Robot Trajectory Generated on Free-Form Work Pieces for Thermal Spraying Zhen-Hua Cai,Si-Hao Deng,Han-Lin Liao,Chun-Nian Zeng,Christian Coddet ITSC 2012, May 2012, Houston, France. pp.429-435, 2012, ⟨10.31399/asm.cp.itsc2012p0429⟩ Proceedings/Recueil des communications hal-05508055v1
Spray Operating Parameters Optimization Based on Artificial Intelligence during Plasma Process T. Liu,M.-P. Planche,S. Deng,G. Montavon,A.-F. Kanta ITSC 2012, May 2012, Houston, France. pp.562-567, 2012, ⟨10.31399/asm.cp.itsc2012p0562⟩ Proceedings/Recueil des communications hal-05508054v1
New Method of Generating Robot Trajectory on Complex Geometric Workpiece Z. Cai,S. Deng,H. Liao,C. Coddet,C. Zeng ITSC 2011, Sep 2011, Hamburg, France. pp.1262-1266, 2011, ⟨10.31399/asm.cp.itsc2011p1262⟩ Proceedings/Recueil des communications hal-05508057v1
Automatic Generation of Robot Trajectory for Free-form Surfaces in Thermal Spraying D. Fang,S. Deng,H. Liao,C. Coddet ITSC 2011, Sep 2011, Hamburg, France. pp.1110-1114, 2011, ⟨10.31399/asm.cp.itsc2011p1110⟩ Proceedings/Recueil des communications hal-05508058v1
The Improvements of Thermal Spray Toolkit, Extended Software for Robotic Off-Line Programming D. Fang,S. Deng,H. Liao,C. Coddet ITSC2010, May 2010, Singapore, France. pp.522-526, 2010, ⟨10.31399/asm.cp.itsc2010p0522⟩ Proceedings/Recueil des communications hal-05508061v1
Heat Flux Controls by In Situ Laser Treatment for Thermal Spraying Y. Danlos,S. Costil,S. Deng,H. Liao ITSC2009, May 2009, Las Vegas, France. pp.1056-1061, 2009, ⟨10.31399/asm.cp.itsc2009p1056⟩ Proceedings/Recueil des communications hal-05508063v1
Benefit of Surface Oxide Removal on Thermal Spray Coating Adhesion Using the PROTAL Process H. Li,S. Costil,S-H. Deng,H-L. Liao,C. Coddetet al. ITSC2006, May 2006, Seattle, France. pp.1265-1270, 2006, ⟨10.31399/asm.cp.itsc2006p1265⟩ Proceedings/Recueil des communications hal-05508067v1
Ni-Cr Coatings Deposited on a Magnesium Alloy Substrate Using the PROTAL Process H. Li,S. Costil,S-H. Deng,C. Coddet,H-L. Liaoet al. ITSC2006, May 2006, Seattle, France. pp.1253-1258, 2006, ⟨10.31399/asm.cp.itsc2006p1253⟩ Proceedings/Recueil des communications hal-05508064v1
New Functions of Thermal Spray Toolkit—A Software Developed for Offline and Rapid Robot Programming S. Deng,H. Li,H. Liao,C. Coddet,C. Zenget al. ITSC2006, May 2006, Seattle, France. pp.1437-1442, 2006, ⟨10.31399/asm.cp.itsc2006p1437⟩ Proceedings/Recueil des communications hal-05508069v1
Robotic Trajectory Autogeneration in Thermal Spraying S. Deng,H. Liao,C. Zeng,P. Charles,C. Coddet ITSC2005, May 2005, Basel, France. pp.481-485, 2005, ⟨10.31399/asm.cp.itsc2005p0481⟩ Proceedings/Recueil des communications hal-05508071v1

Chapitre d'ouvrage (1)

Cold Spraying of 3D Parts – Challenges Hongjian Wu,Rija Nirina Raoelison,Yicha Zhang,Sihao Deng,Hanlin Liao Thermal Spray Coatings, 1, CRC Press, pp.37-58, 2021, ⟨10.1201/9781003213185-2⟩ Chapitre d'ouvrage hal-05507865v1

Pré-publication, Document de travail (1)

NavWareSet: A Dataset of Socially Compliant and Non-Compliant Robot Navigation Johnata Brayan,S. Deng,Armando Alves Neto,Iaroslav Okunevich,Tomas Krajniket al. 2026 Pré-publication, Document de travail (preprint/prepublication) hal-05231729v2

Thèse (1)

Programmation robotique hors-ligne et contrôle en temps réel des trajectoires S. Deng Sciences de l'ingénieur [physics]. Université de Technologie Belfort-Montbéliard, 2006. Français. ⟨NNT : ⟩ Thèse tel-05508127v1