Mabrouki Tarek

Identifiants chercheurs

IdHAL :

tarek-mabrouki

ResearcherID :

http://www.researcherid.com/rid/J-6208-2013

Publications

Article dans une revue (77)

3D macro-mechanical FE simulation for GLARE® drilling with experimental validation Imed Boughdiri,Tarek Mabrouki,Redouane Zitoune,Khaled Giasin,Mohamed Faycal Ameur Composite Structures, 2023, 304, pp.116458. ⟨10.1016/j.compstruct.2022.116458⟩ Article dans une revue hal-04028042v1
Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates Imed Boughdiri,Khaled Giasin,Tarek Mabrouki,Redouane Zitoune Composite Structures, 2021, 261, pp.113562. ⟨10.1016/j.compstruct.2021.113562⟩ Article dans une revue hal-03327319v1
Modelling of macroscopic cutting forces in internal broaching of an X12Cr13 stainless steel Dorian Fabre,Cedric Bonnet,Tarek Mabrouki,Joël Rech Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, 234 (11), pp.1379-1387. ⟨10.1177/0954405420911262⟩ Article dans une revue hal-04084605v1
Textile composite structural analysis taking into account the forming process Abderrahmen Aridhi,Makrem Arfaoui,Tarek Mabrouki,Naïm Naouar,Yvan Deniset al. Composites Part B: Engineering, 2019, 166, pp.773-784. ⟨10.1016/j.compositesb.2019.02.047⟩ Article dans une revue hal-02399005v1
Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach Lakhdar Bouzid,Sofiane Berkani,Mohamed Athmane Yallese,François Girardin,Tarek Mabrouki International Journal of Industrial Engineering Computations, 2018, pp.349-368. ⟨10.5267/j.ijiec.2017.8.002⟩ Article dans une revue hal-01999581v1
Optimization of surface roughness in broaching Dorian Fabre,Cédric Bonnet,Joël Rech,Tarek Mabrouki CIRP Journal of Manufacturing Science and Technology, 2017, 18, pp.115-127. ⟨10.1016/j.cirpj.2016.10.006⟩ Article dans une revue hal-04670979v1
Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods A. Chabbi,A. Yallese,M. Nouioua,I. Meddour,T. Mabroukiet al. International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8), pp.2267-2290. ⟨10.1007/s00170-016-9858-8⟩ Article dans une revue hal-01999555v1
Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function Amel Chabbi,Mohamed Athmane Yallese,Ikhlas Meddour,Mourad Nouioua,Tarek Mabroukiet al. Measurement - Journal of the International Measurement Confederation (IMEKO), 2017, 95, pp.99-115. ⟨10.1016/j.measurement.2016.09.043⟩ Article dans une revue hal-01999564v1
Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts Mohamed Fnides,Mohamed Yallese,Riad Khattabi,Tarek Mabrouki,François Girardin International Journal of Industrial Engineering Computations, 2017, pp.493-512. ⟨10.5267/j.ijiec.2017.3.001⟩ Article dans une revue hal-01999574v1
Numerical and experimental investigations of post-machining distortions in thin machined structures considering material-induced residual stress W. Saleem Awan,Tarek Mabrouki Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 (2), pp.509-521. ⟨10.1007/s40430-015-0386-5⟩ Article dans une revue hal-04662605v1
Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach Hamid Tebassi,Mohamed Athmane Yallese,Salim Belhadi,François Girardin,Tarek Mabrouki International Journal of Industrial Engineering Computations, 2017, pp.347-362. ⟨10.5267/j.ijiec.2016.12.003⟩ Article dans une revue hal-01999573v1
On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit Hamid Tebassi,Mohamed Athmane Yallese,Ikhlas Meddour,François Girardin,Tarek Mabrouki Periodica Polytechnica Mechanical Engineering, 2017, 61 (1), pp.1-11. ⟨10.3311/PPme.8742⟩ Article dans une revue hal-01999568v1
Performance of coated and uncoated mixed ceramic tools in hard turning process Hamza Bensouilah,Hamdi Aouici,Ikhlas Meddour,Mohamed Athmane Yallese,Tarek Mabroukiet al. Measurement - Journal of the International Measurement Confederation (IMEKO), 2016, 82, pp.1-18. ⟨10.1016/j.measurement.2015.11.042⟩ Article dans une revue hal-01999561v1
Some insights on the modelling of chip formation and its morphology during metal cutting operations Tarek Mabrouki,Cédric Courbon,Yancheng Zhang,Joël Rech,Daniel Néliaset al. Comptes Rendus. Mécanique, 2016, 344 (4-5), pp.335 - 354. ⟨10.1016/j.crme.2016.02.003⟩ Article dans une revue hal-01442818v1
On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4 V Using Three Types of Numerical Models of Orthogonal Cutting Yancheng Zhang,J.C. Outeiro,Tarek Mabrouki Procedia CIRP, 2015, ⟨10.1016/j.procir.2015.03.052⟩ Article dans une revue hal-01442867v1
Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology Lakhdar Bouzid,Mohamed Athmane Yallese,Kamel Chaoui,Tarek Mabrouki,Lakhdar Boulanouar Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229 (1), pp.45-61. ⟨10.1177/0954405414526385⟩ Article dans une revue hal-04710106v1
A new procedure to increase the orthogonal cutting machining time simulated Guediche Mayssa,Tarek Mabrouki,Christophe Donnet,Jean-Michel Bergheau,Hedi Hamdi Procedia CIRP, 2015, 31, pp.299-303. ⟨10.1016/j.procir.2015.04.096⟩ Article dans une revue hal-01228822v1
Further insight into the chip formation of ferritic-pearlitic steels: microstructural evolutions and associated thermo-mechanical loadings Cedric Courbon,Tarek Mabrouki,Joel Rech,Denis Mazuyer,F. Perrardet al. International Journal of Machine Tools and Manufacture, 2014, 77, pp.34 - 46. ⟨10.1016/j.ijmachtools.2013.10.010⟩ Article dans une revue istex hal-00938538v1
Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation Yancheng Zhang,Xiaoying Zhuang,Jacob Muthu,Tarek Mabrouki,Michael Fontaineet al. Composites Part B: Engineering, 2014, 63, pp.27 - 33. ⟨10.1016/j.compositesb.2014.03.009⟩ Article dans une revue hal-01442873v1
RMS-based optimisation of surface roughness when turning AISI 420 stainless steel Lakhdar Bouzid,Mohamed Athmane Yallese,Salim Belhadi,Tarek Mabrouki,Lakhdar Boulanouar International Journal of Materials and Product Technology, 2014, 49 (4), pp.224-251. ⟨10.1504/IJMPT.2014.064934⟩ Article dans une revue hal-04710409v1
On the turning modeling and simulation: 2D and 3D FEM approaches M. Asad,T. Mabrouki,H. Ijaz,M. Aurangzeb Khan,W. Saleem Mechanics & Industry, 2014, 15 (5), pp.427-434. ⟨10.1051/meca/2014045⟩ Article dans une revue hal-04710390v1
Metallurgical aspects of material behaviour in cutting of aisi 1045 Cedric Courbon,Tarek Mabrouki,Joel Rech,Denis Mazuyer,F. Perrardet al. Key Engineering Materials, 2013, 554-557, pp.2085-2092. ⟨10.4028/www.scientific.net/KEM.554-557.2085⟩ Article dans une revue hal-00966328v1
An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase Yancheng Zhang,Junhua Zhao,Yue Jia,Tarek Mabrouki,Yadong Gonget al. Composite Structures, 2013, 104, pp.261-269. ⟨10.1016/j.compstruct.2013.04.029⟩ Article dans une revue istex hal-00938430v1
On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations Zahia Hessainia,Ahmed Belbah,Mohamed Athmane Yallese,Tarek Mabrouki,Jean-Francois Rigal Measurement - Journal of the International Measurement Confederation (IMEKO), 2013, 46, pp.1671 - 1681. ⟨10.1016/j.measurement.2012.12.016⟩ Article dans une revue istex hal-00938612v1
On the modelling of an aluminium alloy milling: 3d fem approach Muhammad Asad,Tarek Mabrouki Mechanika, 2013, 19, pp.588-592. ⟨10.5755/j01.mech.19.5.5538⟩ Article dans une revue hal-00938566v1
ON DIFFERENT FE-BASED MODELS TO SIMULATE CUTTING OPERATION OF TITANIUM ALLOY (TI-6AL-4V) Y. Zhang,D. Umbrello,T. Mabrouki,S. Rizzuti,D. Neliaset al. Mechanika, 2013, 19 (3), ⟨10.5755/j01.mech.19.3.4656⟩ Article dans une revue hal-01914241v1
A multiscale cutting model based on the theory of gradient plasticity Tarek Mabrouki,Jean-Francois Rigal,Muhammad Asad Advanced Materials Research, 2013, 698, pp.99-106. ⟨10.4028/www.scientific.net/AMR.698.99⟩ Article dans une revue hal-00938633v1
On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of aisi 1045: formation mechanisms and influence on the cutting process Cedric Courbon,Tarek Mabrouki,Joel Rech,Denis Mazuyer,Enrico D Eramo Applied Thermal Engineering, 2013, 50, pp.1311-1325. ⟨10.1016/j.applthermaleng.2012.06.047⟩ Article dans une revue istex hal-00938561v1
On different fe-based models to simulate cutting operation of titanium alloy (ti-6al-4v) Yancheng Zhang,D. Umbrello,Tarek Mabrouki,S. Rizzuti,Daniel Neliaset al. Mechanika, 2013, 19, pp.349-357 Article dans une revue hal-00938377v1
Three-dimensional finite element modeling of rough to finish down-cut milling of an aluminum alloy Muhammad Asad,Tarek Mabrouki,Asif A Memon,Syed Mushtaq A. Shah,Muhammad A. Khan Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227, pp.75-83. ⟨10.1177/0954405412462811⟩ Article dans une revue hal-00938577v1
Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning aisi 4140 steel Mohamed Elbah,Mohamed Athmane Yallese,Hamdi Aouici,Tarek Mabrouki,Jean-Francois Rigal Measurement - Journal of the International Measurement Confederation (IMEKO), 2013, 46, pp.3041 - 3056. ⟨10.1016/j.measurement.2013.06.018⟩ Article dans une revue istex hal-00938597v1
Turning roughness model based on tool-nose displacements Hessainia Zahia,Kribes Nabil,Mohamed Athmane Yallese,Tarek Mabrouki,Noureddine Ouelaaet al. Mechanika, 2013, 19, pp.112-119. ⟨10.5755/j01.mech.19.1.3612⟩ Article dans une revue hal-00938372v1
Turning modeling and simulation of an aerospace grade aluminum alloy using two-dimensional and three-dimensional finite element method Muhammad Asad,Hassan Ijaz,Muhammad A. Khan,Tarek Mabrouki,Waqas Saleem Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 228 (3), pp.367-375. ⟨10.1177/0954405413501809⟩ Article dans une revue hal-04710326v1
Analysis of surface roughness and cutting force components in hard turning with cbn tool: prediction model and cutting conditions optimization Hamdi Aouici,Mohamed Athmane Yallese,Kamel Chaoui,Tarek Mabrouki,Jean-Francois Rigal Measurement - Journal of the International Measurement Confederation (IMEKO), 2012, 45, pp.344-353. ⟨10.1016/j.measurement.2011.11.011⟩ Article dans une revue istex hal-00938386v1
Elaboration of analytical thermo-mechanical cutting model matched by numerical and experimental results Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi Mechanika, 2012, 18, pp.705-712. ⟨10.5755/j01.mech.18.6.3161⟩ Article dans une revue hal-00966329v1
Numerical and experimental study of residual stress induced by machining process Ferdinando Salvatore,Faycel Halila,Tarek Mabrouki,Hedi Hamdi International Journal of Surface Science and Engineering, 2012, 6, pp.136-147. ⟨10.1504/IJSURFSE.2012.046849⟩ Article dans une revue hal-00938325v1
The use of numerical simulations to improve a new analytical chip formation model Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi Mechanics & Industry, 2012, 13 (06), pp.405-414. ⟨10.1051/meca/2012033⟩ Article dans une revue hal-00950619v1
Numerical simulation and analytical modelling of ploughing and elastic phenomena during machining processes Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi International Journal of Surface Science and Engineering, 2012, 6 (3), pp.185-200. ⟨10.1504/IJSURFSE.2012.049064⟩ Article dans une revue hal-04710862v1
Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of aisi 52100 steel Mohamed Walid Azizi,Salim Belhadi,Mohamed Athmane Yallese,Tarek Mabrouki,Jean-Francois Rigal Journal of Mechanical Science and Technology, 2012, 26, pp.4105-4114. ⟨10.1007/s12206-012-0885-6⟩ Article dans une revue istex hal-00938277v1
Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements Yancheng Zhang,Tarek Mabrouki,Daniel Nelias,Cedric Courbon,Joel Rechet al. Journal of Materials Processing Technology, 2012, 212, pp.936-953. ⟨10.1016/j.jmatprotec.2011.12.001⟩ Article dans une revue istex hal-00938429v1
FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface Yancheng Zhang,Tarek Mabrouki,Daniel Nelias,Y. Gong International Journal of Material Forming, 2011, 4, pp.11-23. ⟨10.1007/s12289-010-0986-7⟩ Article dans une revue hal-00581097v1
Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness† Hamdi Aouici,Mohamed Athmane Yallese,Brahim Fnides,Kamel Chaoui,Tarek Mabrouki Journal of Mechanical Science and Technology, 2011, 25 (11), pp.1-9. ⟨10.1007/s12206-011-0807-z⟩ Article dans une revue istex hal-00629451v1
Analytical Model of Chip Formation in Case of Orthogonal Cutting Processes Ferdinando Salvatore,Tarek Mabrouki,Hédi Hamdi Advanced Materials Research, 2011, 223, pp.101-110. ⟨10.4028/www.scientific.net/AMR.223.101⟩ Article dans une revue hal-00629452v1
Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel B. Fnides,M.A. Yallese,Tarek Mabrouki,Jean Francois Rigal Sadhana, 2011, 36 (1), pp.109-123. ⟨10.1007/s12046-011-0007-7⟩ Article dans une revue istex hal-00581074v1
Chip formation in orthogonal cutting considering interface limiting shear stress and damage evolution based on fracture energy approach Yancheng Zhang,Tarek Mabrouki,Daniel Nelias,Yadong Gong Finite Elements in Analysis and Design, 2011, 47, pp.850-863. ⟨10.1016/j.finel.2011.02.016⟩ Article dans une revue istex hal-00629449v1
Comportement en cisaillement de materiaux composites carbone/pps et carbone/peek sous haute temperature Q. Chen,Philippe Boisse,Tarek Mabrouki,Abdelghani Saouab,Chung Hae Parket al. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2011, 21, pp.105-117 Article dans une revue hal-00938548v1
Vers une demarche de caracterisation des performances d usinage d un acier Cedric Courbon,Tarek Mabrouki,Joel Rech,Denis Mazuyer,Enrico D Eramoet al. Matériaux et Techniques, 2011, 98, pp.369-376. ⟨10.1051/mattech/2010117⟩ Article dans une revue istex hal-00938562v1
On Methodologies inside Two Different Commercial Codes to Simulate the Cutting Operation Yancheng Zhang,Domenico Umbrello,Tarek Mabrouki,Stefania Rizzuti,Daniel Neliaset al. Advanced Materials Research, 2011, 223, pp.162-171. ⟨10.4028/www.scientific.net/AMR.223.162⟩ Article dans une revue hal-00629454v1
New Thermal Issues on the Modelling of Tool-Workpiece Interaction: Application to Dry Cutting of AISI 1045 Steel Cédric Courbon,Tarek Mabrouki,Joël Rech,Denis Mazuyer,Enrico d'Eramo Advanced Materials Research, 2011, 223, pp.286-295. ⟨10.4028/www.scientific.net/AMR.223.286⟩ Article dans une revue hal-00629453v1
Towards a physical comprehension of material strengthening factors during macro to micro-scale Muhammad Asad,Tarek Mabrouki,François Girardin,Yancheng Zhang,Jean Francois Rigal Mechanika, 2011, 17 (1), pp.97-104 Article dans une revue hal-00581081v1
BENCHMARK STUDY OF FINITE ELEMENT MODELS FOR SIMULATING THE THERMOSTAMPING OF WOVEN-FABRIC REINFORCED COMPOSITES J. Sargent,J. Chen,J. Sherwood,J. Cao,P. Boisseet al. International Journal of Material Forming, 2010, 3 (1), pp.683-686. ⟨10.1007/s12289-010-0862-5⟩ Article dans une revue hal-04711586v1
Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark M.A. Khan,Tarek Mabrouki,Emmanuelle Vidal-Salle,Philippe Boisse Journal of Materials Processing Technology, 2010, 210, pp. 378-388. ⟨10.1016/j.jmatprotec.2009.09.027⟩ Article dans une revue istex hal-00505131v1
On the tool vibration effects during down-cut peripheral milling process Muhammad Asad,Tarek Mabrouki,Jean Francois Rigal International Journal on Interactive Design and Manufacturing, 2010, 4 (4), pp.215-225 Article dans une revue hal-00581093v1
Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool H. Aouici,M.A. Yallese,B. Fnides,Tarek Mabrouki Mechanika, 2010, 6 (86), pp.71-77 Article dans une revue hal-00581089v1
On the identification conditions of a constitutive model in machining of aisi 1045 steel Cedric Courbon,Tarek Mabrouki,Joel Rech,Jean-Francois Rigal,Denis Mazuyeret al. International Journal of Material Forming, 2010, 3, pp.439-442. ⟨10.1007/s12289-010-0801-5⟩ Article dans une revue hal-00951066v1
Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool K. Bouacha,M.A. Yallese,Tarek Mabrouki,Jean Francois Rigal International Journal of Refractory Metals and Hard Materials, 2010, 28 (3), pp.349-361. ⟨10.1016/j.ijrmhm.2009.11.011⟩ Article dans une revue istex hal-00502239v1
Finite-element-based hybrid dynamic cutting model for aluminium alloy milling Muhammad Asad,Tarek Mabrouki,J-F Rigal Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010, 224 (1), pp.1-13. ⟨10.1243/09544054JEM1590⟩ Article dans une revue hal-00502236v1
Textile composite forming simulations at meso and macro scale Nahiene Hamila,Naim Akhtar Akhtar Khan,Sébastien Gatouillat,Emmanuel de Luycker,Emmanuelle Vidal-Salleet al. World Journal of Engineering, 2010, 7 (1), pp.123-129 Article dans une revue hal-00581092v1
Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3) H. Bouchelaghem,M.A. Yallese,Tarek Mabrouki,Abdelkrim Amirat,Jean Francois Rigal Journal of Machining Science and Technology, 2010, 14 (4), pp.471-501. ⟨10.1080/10910344.2010.533621⟩ Article dans une revue hal-00581087v1
Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming Philippe Boisse,Yamina Aimene,A. Dogui,Samia Dridi,Sébastien Gatouillatet al. International Journal of Material Forming, 2010, 3, pp.1229-1240. ⟨10.1007/s12289-009-0664-9⟩ Article dans une revue hal-00502248v1
NUMERICAL AND EXPERIMENTAL FORMING ANALYSIS OF WOVEN COMPOSITES WITH DOUBLE DOME BENCHMARK M. A. Khan,T. Mabrouki,P. Boisse International Journal of Material Forming, 2009, 2 (1), pp.201-204. ⟨10.1007/s12289-009-0549-y⟩ Article dans une revue hal-04711830v1
Surface roughness model in turning hardened hot work steel using mixed ceramic tool Brahim Fnides,Mohamed Athmane Yallese,Tarek Mabrouki,Jean-Francois Rigal Mechanika, 2009, 77, pp.68-73 Article dans une revue hal-00938579v1
A finite element based hybrid dynamic cutting model for an aluminium alloy milling Muhammad Asad,Tarek Mabrouki,Jean-François Rigal Proceedings of the Institution of Mechanical Engineers. Part B, Management and Engineering Manufacture, 2009, 224, pp.1-13 Article dans une revue hal-00485505v1
A Smart Machining Systems application to reduce the machining costs within a multi-process production Jean Francois Rigal,Tarek Mabrouki International Journal of Mechatronics and Manufacturing Systems, 2009, 2 (5-6), pp.505-515 Article dans une revue hal-00504158v1
Dry cutting study of an aluminium alloy (A2024-T351): a numerical and experimental approach M. Asad,F. Girardin,T. Mabrouki,J-F. Rigal International Journal of Material Forming, 2008, 1 (1), pp.499-502. ⟨10.1007/s12289-008-0150-9⟩ Article dans une revue hal-04712041v1
Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351) Tarek Mabrouki,François Girardin,Muhammad Asad,Jean-François Rigal International Journal of Machine Tools & Manufacture, 2008, 48 (11), pp.1187-1197. ⟨10.1016/j.ijmachtools.2008.03.013⟩ Article dans une revue istex hal-00383575v1
Preforming simulation of the reinforcements of woven composites: continuous approach within a commercial code Muhammad Aurangzeb Khan,Tarek Mabrouki,S. Gauthier,Emmanuelle Vidal-Salle,Philippe Boisse International Journal of Material Forming, 2008, 1 (S1), pp.879-882. ⟨10.1007/s12289-008-0236-4⟩ Article dans une revue hal-00506215v1
Draping of textile composite reinforcements: Continuous and discrete approaches Philippe Boisse,Nahiene Hamila,Fabrice Helenon,Yamina Aimene,Tarek Mabrouki Advanced composites letters, 2007, pp.125-131 Article dans une revue hal-00380764v1
A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning Tarek Mabrouki,Jean-Francois Rigal Journal of Materials Processing Technology, 2006, 176 (1-3), pp.214-221. ⟨10.1016/j.jmatprotec.2006.03.159⟩ Article dans une revue istex hal-00938632v1
Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel S. Belhadi,Tarek Mabrouki,J-F Rigal,L. Boulanouar Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005, 219 (7), pp.515-524. ⟨10.1243/095440505X32445⟩ Article dans une revue istex hal-00368444v1
Modélisation et expérimentation du décapage par jet d'eau haute pression Tarek Mabrouki,Alain Cornier,Hafiz Osman,Kadour Raïssi Mechanics & Industry, 2004, 5, pp.11-25. ⟨10.1051/meca:2004003⟩ Article dans une revue hal-00021161v1
Experimental analysis of high-speed air-water jet flow in an abrasive water jet mixing tube A.H. Osman,T. Mabrouki,B. Thery,Daniel Buisine Flow Measurement and Instrumentation, 2004, 15 (1), pp.37-48 Article dans une revue hal-00138087v1
Experimental analysis of high-speed air-water jet flow in an abrasive water jet mixing tube Hafiz Osman,Tarek Mabrouki,B. Thery,D. Buisine Flow Measurement and Instrumentation, 2004, pp.37-48 Article dans une revue hal-00450604v1
Prédiction du comportement vibratoire du fraisage latéral de finition des pièces à parois minces François Lapujolade,Tarek Mabrouki,Kadour Raïssi Mechanics & Industry, 2002, 3 (4), pp.403-408 Article dans une revue hal-00021146v1
Stripping process modelling: interaction between a moving waterjet and coated target Tarek Mabrouki,K. Raissi International Journal of Machine Tools & Manufacture, 2002, pp.1247-1258 Article dans une revue hal-00454906v1
Stripping process modelling: interaction between a moving waterjet and coated target Tarek Mabrouki,Kadour Raissi International Journal of Machine Tools and Manufacture, 2002, 42 (11), pp.1247-1258. ⟨10.1016/S0890-6955(02)00052-4⟩ Article dans une revue hal-00021142v1
A numerical simulation and experimental study of the interaction between a pure high-velocity waterjet and targets : contribution to investigate the decoating process Tarek Mabrouki,K. Raissi,A. Cornier Wear, 2000, pp.260-273 Article dans une revue hal-00450330v1

Communication dans un congrès (37)

Modélisation et simulation numérique de l'emboutissage d'un renfort tissé sec : Sensibilité de l'angle de cisaillement aux paramètres du procédé Abderrahmen Aridhi,Tarek Mabrouki,Makrem Arfaoui,Naim Naouar,Philippe Boisseet al. CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France Communication dans un congrès hal-03465447v1
Iterative Lagrangian Model of Broaching to Study Cutting Forces, Temperatures and Chip Formation D. Fabre,C. Bonnet,J. Rech,T. Mabrouki PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), Apr 2016, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, Unknown Region. ⟨10.1063/1.4963478⟩ Communication dans un congrès hal-04708240v1
ON NUMERICAL STRATEGY FOR TOOL WEAR MODELLING DURING AISI 4140 CUTTING Mayssa Guediche,T Mabrouki,C Donnet,Jean-Michel Bergheau,Hédi Hamdi International Conference on Computational Methods in Manufacturing Processes, ICOMP'2016, May 2016, Liège, Belgium Communication dans un congrès hal-01416301v1
Analytical modeling of material removal process in the case of orthogonal cutting and worn tools Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01515077v1
Nouvelle procédure pour l'augmentation du temps d'usinage simulé en coupe orthogonale Mayssa Guediche,Tarek Mabrouki,Christophe Donnet,Jean-Michel Bergheau,Hedi Hamdi 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France Communication dans un congrès hal-01514291v1
A New Procedure to Increase the Orthogonal Cutting Machining Time Simulated Mayssa Guediche,Tarek Mabrouki,Jean-Michel Bergheau,Christophe Donnet,Hédi Hamdi CIRP Conference on Modelling and Machining Operations, Jun 2015, Karlsruhe, Germany. pp.299 - 303, ⟨10.1016/j.procir.2015.04.096⟩ Communication dans un congrès hal-01416273v1
Modeling and optimization of tool wear and surface roughness in turning of austenitic stainless steel using response surface methodology Sofian Berkani,Lakhdar Bouzid,Hamza Bensouilah,Mohamed Athman Yallese,François Girardinet al. CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France Communication dans un congrès hal-03446160v1
Towards a physical FE modelling of a dry cutting operation: influence of dynamic recrystallization when machining AISI 1045 C. Courbon,T. Mabrouki,Jérôme Rech,D. Mazuyer,F. Perrardet al. 14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), Jun 2013, SARA BURGERHARTSTRAAT 25, PO BOX 211, 1000 AE AMSTERDAM, Netherlands. pp.516-521, ⟨10.1016/j.procir.2013.06.143⟩ Communication dans un congrès hal-04710809v1
Étude des perturbations thermiques induites par des hétérogénéités de contact à l'interface outil-copeau en usinage Cédric Courbon,Tarek Mabrouki,Joël Rech,Denis Mazuyer,Enrico d'Eramo CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France Communication dans un congrès hal-03440628v1
The use of numerical simulations to improve analytical chip formation model Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi 10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB Communication dans un congrès hal-00592695v1
Analytical model of removal material in the case of cutting and abrasion processes F. Salvatore,Tarek Mabrouki,H. Hamdi 4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM Communication dans un congrès hal-00504176v1
ANALYTICAL MODEL FOR CHIP FORMATION IN CASE OF ORTHOGONAL MACHINING PROCESS Ferdinando Salvatore,Tarek Mabrouki,Hedi Hamdi INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, Oct 2010, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, Unknown Region. pp.1621+ Communication dans un congrès hal-04711755v1
On the identification conditions of a constitutive model in machining of AISI 1045 steel C. Courbon,Tarek Mabrouki,Joël Rech,Jean Francois Rigal,Denis Mazuyeret al. ESAFORM2010, Apr 2010, BRESCIA, Italy. pp.CDRom Communication dans un congrès hal-00504167v1
Towards a better definition of the mechanical and thermal interface behaviour in dry cutting simulation of AISI 1045 steel C. Courbon,Tarek Mabrouki,Joël Rech,Denis Mazuyer,E. d'Eramoet al. 4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM Communication dans un congrès hal-00504197v1
Identification of limiting shear stress at tool-chip interface - Towards an improved FEmodel of Titanium alloy (Ti-6Al-4V) cutting Y. Zhang,Tarek Mabrouki,Daniel Nelias,Y.D. Gong 4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CD ROM Communication dans un congrès hal-00504174v1
A FE-approach on the influence of material strengthening factors on size effect during macro-to-micro scale millingl Muhammad Asad,Tarek Mabrouki,Jean Francois Rigal 4th International conference on Tribology in Manufacturing Processes, Jun 2010, Nice, France. pp.CDRom Communication dans un congrès hal-00504170v1
Composite reinforcement forming simulation: a multiscale approach Nahiene Hamila,Muhammad Aurangzeb Khan,Sébastien Gatouillat,Emmanuel de Luycker,Emmanuelle Vidal-Salleet al. ICCM17, Jul 2009, Edimburg, United Kingdom. pp.1-10 Communication dans un congrès hal-00464204v1
A Study of the Effects of Friction Coefficient on Chip Formation Based on Hard Turning Thermo-mechanical Model Yancheng Zhang,Yadong Gong,Jian Qiu,Tarek Mabrouki,Daniel Nelias Chinese Control and Decision Conference, CCDC, Jul 2008, Yantai, China. pp.4925+, ⟨10.1109/CCDC.2008.4598264⟩ Communication dans un congrès hal-04712439v1
Prédiction de la morphologie du copeau durant le fraisage dun alliage daluminium aéronautique (A2024-T351) M. Asad,Tarek Mabrouki,Jean-François Rigal 13ème Session MANUFACTURING 21, Apr 2008, France Communication dans un congrès hal-00506210v1
Numerical and experimental approach for an aluminium alloy micro-milling M. Asad,C. Hignette,Tarek Mabrouki,Jean-François Rigal 2nd international conferance on innovative cutting processes and smart machining, Oct 2008, France Communication dans un congrès hal-00506209v1
Un modèle elements finis pour simuler le fraisage d'un alliage d'aluminium M. Asad,Tarek Mabrouki,Jean-François Rigal 5èmes ASSISES Machines et Usinage à Grande Vitesse, Jun 2008, France Communication dans un congrès hal-00506219v1
Dry cutting study of an aluminium alloy (a2024-t351) : a numerical and experimental approach&quot; Key note paper M. Asad,François Girardin,Tarek Mabrouki,Jean-François Rigal 11th ESAFORM2008 conference on material forming., Apr 2008, France Communication dans un congrès hal-00506211v1
Simulations of one-layer and multi-layer composite forming Nahiene Hamila,Fabrice Helenon,Philippe Boisse,Tarek Mabrouki,Emmanuel de Luyckeret al. 10TH ESAFORM CONFERENCE ON MATERIAL FORMING, Apr 2007, Espagne Communication dans un congrès hal-00506645v1
Fundamental understanding of the segmented chip genesis for smart machining, a contribution in hard material turning Tarek Mabrouki,S. Belhadi,Jean-François Rigal 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, French AIP PRIMECA Network; Inter Inst Product Workshops; Pole Resources Informat Mecan; Comp Resource Pole Mech, May 2006, Grenoble, France. pp.443-459, ⟨10.1007/978-1-4020-6761-7_30⟩ Communication dans un congrès istex hal-00381272v1
Etude dynamique de la formation du copeau Contribution : un modèle de simulation numérique pour le fraisage des alliages daluminium M. Asad,François Girardin,Tarek Mabrouki,Jean-François Rigal 10ème coll. Nat. AIP PRIMECA, Apr 2007, France Communication dans un congrès hal-00506644v1
Mise en oeuvre du logiciel ESPRIT au pôle AIP-PRIMECA RAO A. Valisolalo,J.-F. Clavier,Jean Francois Rigal,Tarek Mabrouki,A. Toumine Journées PRIMECA, La chaîne numérique de la CFAO à la fabrication, 2006, Compiègne, France Communication dans un congrès hal-00432824v1
Fundamental understanding of the segmented chip genesisfor smart machining, a contribution in hard material turning Tarek Mabrouki,S. Belhadi,Jean-François Rigal Int. Conf. on Interg. Design and Manuf. Mech. Eng, (IDMME06), May 2006, France Communication dans un congrès hal-00506925v1
On some thermo-mechanical effects during chip genesis in hard turning Tarek Mabrouki,S. Belhadi,Jean-François Rigal 5th Int. Conf. on High Speed Machining, Mar 2006, France Communication dans un congrès hal-00506886v1
Etude des effets thermécaniques lors de la simulation de la formation d'un copeau en TD et en UGV Tarek Mabrouki 2ème PPF Simulation numérique des conséquences métallurgiques et mécaniques induites par les procédés mettant en jeu des hautes températures, 2005, St. GALMIER, France Communication dans un congrès hal-00429968v1
On the modelling of serrated chip formation Tarek Mabrouki,Laurent Deshayes,Jean-François Rigal The 7th Esaform Conference on Material Forming ESAFORM 2004, Apr 2004, Norvège Communication dans un congrès hal-00507326v1
Serrated-chip formation prediction : Modelling method and experimental results Tarek Mabrouki,Laurent Deshayes,Jean-François Rigal 5th International Conference on Intergrated Design and Manufacture in Mechanical Engineering, Apr 2004, Royaume-Uni Communication dans un congrès hal-00507353v1
Modélisation et simulation temporelle du comportement dynamique des plaques minces en fraisage latéral de finition F. Lapujoulade,K. Raissi,Tarek Mabrouki 2ème Assises Machines et Usinage Grande Vitesse ENSAM, Mar 2003, France Communication dans un congrès hal-00507984v1
Détermination de la plage des vitesses de coupe. Extension de l'activité du COM (Couple Outil Matière) avec le système POM (Pièce Outil Machine) Laurent Deshayes,Jean-François Rigal,Tarek Mabrouki Colloque sur la Maîtrise des Systèmes Complexes, AIP-PRIMECA, Apr 2003, France Communication dans un congrès hal-00507910v1
Some Difficulties in the Flow Front Treatment in Fixed Mesh Simulations of Composites Forming Processes Francisco Chinesta,Tarek Mabrouki,Antonio Ramón 5th ESAFORM Conference on Material Forming, 2002, Krakow, Poland. pp.295-298 Communication dans un congrès hal-00020789v1
Prédiction du comportement dynamique en fraisage latéral de finition des plaques minces F. Lapujoulade,K. Raissi,Tarek Mabrouki 8ème PPF (Programme Pluri-Formations) sur la Maïtrise Globale du Procédé d'Enlèvement de Matière et des Techniques Associées. CER-ENSAM, Dec 2001, France Communication dans un congrès hal-00508092v1
Experimental investigation and numerical modeling of H.P. pure waterjet impingement in the aeronautical decoating process Tarek Mabrouki,A. Cornier,K. Raissi 13th Int. Conf. On Surface Treatments in the Aeronautical and Aerospace Industries, SURFAIR2000, Jun 2000, France Communication dans un congrès hal-00508196v1
Numerical simulation of high velocity pure waterjet impingement on coated material Tarek Mabrouki,K. Raissi,A. Cornier 15th Int. Conf. On Jetting Technology, Sep 2000, Suisse Communication dans un congrès hal-00508195v1