Yannick TILLIER Responsable de l'activité de recherche en Biomécanique (matériaux solides)

Identifiants chercheurs

IdHAL :

yannick-tillier

ORCID :

0000-0002-0002-9992

IdRef :

177084189

Présentation

Publications

Article dans une revue (35)

Stress distribution in the edentulous maxilla during immediate loading using three rehabilitation models: a finite element analysis. Sarah Latreche,Olina Rios,Franck Afota,Charles Savoldelli,Yannick Tillier Multidisciplinary Biomechanics Journal, 2025, 50th congress of the.., ⟨10.46298/mbj.16182⟩ Article dans une revue hal-05191734v2
From Anatomical To Biomechanical Personalization: Comparing Patient-Specific Implants And Miniplates For Le Fort I Osteotomy Using Finite Element Modelling Olina Rios,Sarah Latreche,Yannick Tillier,Charles Savoldelli Multidisciplinary Biomechanics Journal, 2025, 50th congress of the.., ⟨10.46298/mbj.16190⟩ Article dans une revue hal-05191742v2
Impact of Orthodontic-Surgical Treatments on the Signs and Symptoms of Temporomandibular Disorders: A Systematic Review Elodie Ehrmann,Marie Bernabeu,Yannick Tillier,Julien Camia,Corentin Ecalleet al. Dentistry Journal, 2024, 12 (5), pp.132. ⟨10.3390/dj12050132⟩ Article dans une revue hal-04573139v1
Traitement orthodontique-chirurgical : facteur de risque des DTM ? Elodie Ehrmann,Marie Bernabeu,Yannick Tillier,Julien Camia,Corentin Ecalleet al. Revue d'Orthopédie Dento-Faciale, 2023, 57 (4), pp.385-404. ⟨10.1051/odf/2023041⟩ Article dans une revue hal-04269335v1
Application of the time-temperature equivalence at large deformation to describe the mechanical behavior of polyethylene-based thermoplastic, thermoset and vitrimer polymers Tianqi Huang,Julie Alves,Romain Castellani,Yannick Tillier,Jean-Luc Bouvard Polymer, 2023, 281, pp.126110. ⟨10.1016/j.polymer.2023.126110⟩ Article dans une revue hal-04137055v1
Experimental Investigation of Dental Composites Degradation After Early Water Exposure Rémy Gauthier,Hazem Aboueillei,Yoan Boussès,Nathalie Brulat-Bouchard,Pierre Colonet al. Journal of Biomechanical Engineering, 2022, pp.1-18. ⟨10.1115/1.4056197⟩ Article dans une revue hal-03851084v1
The impact of an underactuated arm exoskeleton on wrist and elbow kinematics during Prioritized Activities of daily living Enric Casanova-Batlle,Mark de Zee,Mikkel Thøgersen,Yannick Tillier,Lotte N.S. Andreasen Struijk Journal of Biomechanics, 2022, 139, pp.111137. ⟨10.1016/j.jbiomech.2022.111137⟩ Article dans une revue hal-03671471v1
Update on the parameters influencing the adjustment of the sagittal and transversal condylar inclination of dental articulators. Mathilde Bapelle,Julien Dubromez,Charles Savoldelli,Yannick Tillier,Elodie Ehrmann Quintessence international (Berlin, Germany : 1985), 2021, ⟨10.3290/j.qi.b1702361⟩ Article dans une revue hal-03295504v1
A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materials Yoan Boussès,Nathalie Brulat-Bouchard,Pierre-Olivier Bouchard,Yannick Tillier Dental Materials, 2021, ⟨10.1016/j.dental.2021.01.010⟩ Article dans une revue hal-03174651v1
Modjaw® device: Analysis of mandibular kinematics recorded for a group of asymptomatic subjects Yannick Tillier,Mathilde Bapelle,Julien Dubromez,Charles Savoldelli,Elodie Ehrmann Cranio -Chattanooga Tn-, 2021, pp.1-7. ⟨10.1080/08869634.2021.2000790⟩ Article dans une revue hal-03435418v1
Biomechanical assessment of different fixation methods in mandibular high sagittal oblique osteotomy using a three-dimensional finite element analysis model Charles Savoldelli,Elodie Ehrmann,Yannick Tillier Scientific Reports, 2021, 11 (1), ⟨10.1038/s41598-021-88332-2⟩ Article dans une revue hal-03211542v1
Experimental Bi-axial tensile tests of spinal meningeal tissues and constitutive models comparison Yannick Tillier,Morgane Evin,Patrice Sudres,Pascal Weber,Yves Godio-Raboutetet al. Acta Biomaterialia, 2021, ⟨10.1016/j.actbio.2021.11.028⟩ Article dans une revue hal-03482335v1
Effects of ageing on glass-polymer dental composites Yannick Tillier,Y. Boussès,N. Brulat-Bouchard Computer Methods in Biomechanics and Biomedical Engineering, 2020, 23 (sup1), pp.S47-S48. ⟨10.1080/10255842.2020.1822044⟩ Article dans une revue hal-02986588v1
Mechanical characterization and identification of material parameters of porcine aortic valve leaflets Yannick Tillier,Colin Laville,Christophe Pradille Journal of the mechanical behavior of biomedical materials, 2020, 112, pp.104036. ⟨10.1016/j.jmbbm.2020.104036⟩ Article dans une revue hal-02986597v1
An efficient parallel global optimization strategy based on Kriging properties suitable for material parameters identification Émile Roux,Yannick Tillier,Salim Kraria,Pierre-Olivier Bouchard Archive of Mechanical Engineering, 2020, 67 (2), pp.169. ⟨10.24425/ame.2020.131689⟩ Article dans une revue hal-02624246v1
Determination of the filler-matrix interface strength of dental composites from bending tests Yoan Boussès,Nathalie Brulat-Bouchard,Yannick Tillier Computer Methods in Biomechanics and Biomedical Engineering, 2019, 44th Congress of the Société de Biomécanique, 22 (sup1), pp.S1-S393. ⟨10.1080/10255842.2019.1668135⟩ Article dans une revue hal-02459201v1
Theoretical prediction of dental composites yield stress and flexural modulus based on filler volume ratio Yoan Boussès,Nathalie Brulat-Bouchard,Pierre-Olivier Bouchard,Hazem Abouelleil,Yannick Tillier Dental Materials, 2019, ⟨10.1016/j.dental.2019.10.012⟩ Article dans une revue hal-02374278v1
Diagnosis and management of bruxism: Evaluation of clinical practices in France Marine Guillot,Sébastien Jungo,Armelle Manière,Olivier Laplanche,Yannick Tillieret al. Cranio -Chattanooga Tn-, 2019, 11, pp.1-12. ⟨10.1080/08869634.2019.1661657⟩ Article dans une revue hal-02344615v1
Mechanical characterization of aortic valve tissues using an inverse analysis approach Colin Laville,Víctor Andrès Acosta-Santamaría,Olfa Trabelsi,Stéphane Avril,Yannick Tillier Computer Methods in Biomechanics and Biomedical Engineering, 2015, Special Issue: French Society of Biomechanics 18 (1), pp.1976-1977. ⟨10.1080/10255842.2015.1070586⟩ Article dans une revue hal-01275964v1
Electrofusion Welding Process Optimization Using a Coupled Numerical and Experimental Approach Yannick Tillier,Ziad Chebbo,Michel Vincent,Adil Boujlal,Dominique Gueugnaut International Polymer Processing, 2015, 30 (5), pp.566-573 ⟨10.3139/217.3089⟩ Article dans une revue hal-01253881v1
Numerical and experimental study of the electrofusion welding process of polyethylene pipes Ziad Chebbo,Michel Vincent,Adil Boujlal,Dominique Gueugnaut,Yannick Tillier Polymer Engineering and Science, 2015, 55 (1), pp.123-131. ⟨10.1002/pen.23878⟩ Article dans une revue istex hal-00954554v1
Material properties of the placenta under dynamic loading conditions. Pérès Jérémie,Lionel Thollon,Jérôme Delotte,Yannick Tillier,Christian Brunetet al. Computer Methods in Biomechanics and Biomedical Engineering, 2014, 17 (9), pp.958-964. ⟨10.1080/10255842.2012.727403⟩ Article dans une revue hal-00749499v1
Diffusion-reaction model to describe osteogenesis within a titanium scaffold Mary Schmitt,Philippe Rouch,Yannick Tillier,Thomas Schouman,Rachele Allena Computer Methods in Biomechanics and Biomedical Engineering, 2013, 16 (Supplement 1), pp.266-267. ⟨10.1080/10255842.2013.815936⟩ Article dans une revue hal-00861377v1
Stress distribution in the temporo-mandibular joint discs during jaw closing: a high-resolution three-dimensional finite-element model analysis Charles Savoldelli,Pierre-Olivier Bouchard,Raounak Loudad,Patrick Baqué,Yannick Tillier Surgical and Radiologic Anatomy, 2012, 34 (5), pp.405-413. ⟨10.1007/s00276-011-0917-4⟩ Article dans une revue istex hal-00654635v1
Comparison of stress distribution in the temporomandibular joint during jaw closing before and after symphyseal distraction: a finite element study Charles Savoldelli,Pierre-Olivier Bouchard,Armelle Maniere-Ezvan,Georges V. Bettega,Yannick Tillier International Journal of Oral and Maxillofacial Surgery, 2012, 41 (12), pp.1474-1482. ⟨10.1016/j.ijom.2012.06.005⟩ Article dans une revue istex hal-00719322v1
Determination of Young's modulus of mandibular bone using inverse analysis Guillaume Odin,Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier Medical Engineering & Physics, 2010, 32 (6), pp.Pages 630-637. ⟨10.1016/j.medengphy.2010.03.009⟩ Article dans une revue hal-00509752v1
Détermination expérimentale des lois de comportement mécanique du placenta = Experimental research on mechanical behavior of human placenta M. Dorez,Jérôme Delotte,M. Behr,L. Thollon,Yannick Tillieret al. Gynécologie Obstétrique & Fertilité, 2010, 38 (10), pp.Pages 429-432. ⟨10.1016/j.gyobfe.2010.04.012⟩ Article dans une revue istex hal-00575616v1
Development of a hyperelastic finite element tool for modelling surgery of complex organs (membrane and underlying tissues) Hicham Daanouni,Yannick Tillier Journal of Biological Physics and Chemistry, 2009, 9 (4), pp.Pages 161-166 Article dans une revue hal-00580009v1
Apport de la méthode des éléments finis en chirurgie maxillofaciale = Contribution of the finite element method in maxillofacial surgery Charles Savoldelli,Yannick Tillier,Pierre-Olivier Bouchard,Guillaume Odin Revue de Stomatologie et de Chirurgie Maxillo-Faciale, 2009, 110 (1), pp.Pages 27-33. ⟨10.1016/j.stomax.2008.10.001⟩ Article dans une revue hal-00509255v1
Three-dimensional Finite Element Modeling of an Uterus Surgery Audrey Paccini,Yannick Tillier,J Delotte,M Saidi-Olivier,Marc Durand-Revilleet al. International Journal of Forming Processes, 2007, 10 (1), pp.125-136. ⟨10.3166/ijfp.10.125-136⟩ Article dans une revue hal-02459174v1
Finite element modeling for soft tissue surgery based on linear and nonlinear elasticity behavior. Yannick Tillier,Audrey Paccini,Marc Durand-Reville,Jean-Loup Chenot Computer Aided Surgery, 2006, 11 (2), p. 63-68. ⟨10.1080/10929080600628605⟩ Article dans une revue hal-00530651v1
3D finite element modelling of macular translocation Yannick Tillier,C. Falcot,Audrey Paccini,Jean-Loup Chenot,Georges Caputo International Congress Series, 2005, 1280, pp.Pages 467-472. ⟨10.1016/j.ics.2005.03.261⟩ Article dans une revue istex hal-00517650v1
Immediate post-operative procedure for identification of the rheological parameters of biological soft tissue Marc Durand-Reville,Yannick Tillier,Audrey Paccini,Alain Le Floch,Jérôme Delotteet al. International Congress Series, 2004, 1268, pp.Pages 407-412. ⟨10.1016/j.ics.2004.03.147⟩ Article dans une revue istex hal-00575620v1
Three-dimensional finite element modelling for soft tissues surgery Yannick Tillier,Audrey Paccini,Marc Durand-Reville,François Bay,Jean-Loup Chenot International Congress Series, 2003, 1256, pp.Pages 349-355. ⟨10.1016/S0531-5131(03)00505-3⟩ Article dans une revue istex hal-00575623v1
Identification of magnetic parameters by inverse analysis coupled with finite-element modeling Y. Favennec,V. Labbe,Yannick Tillier,F. Bay IEEE Transactions on Magnetics, 2002, 38 (6), pp.3607-3619. ⟨10.1109/TMAG.2002.804815⟩ Article dans une revue hal-02459165v1

Communication dans un congrès (24)

STARCH AND STARCH-HYDROXYAPATITE AEROGELS AND XEROGELS: HIERARCHICALLY STRUCTURED BIO-BASED MATERIALS FOR POTENTIALCANCELLOUS BONE REPAIR Hiba Bouras,Sytze Buwalda,Yannick Tillier,Jean-Marie Nedelec,Alice Roscelliet al. 21st International Conference on Polysaccharides-Glycoscience 2025, Nov 2025, Prague (Czech Republic), Czech Republic Communication dans un congrès hal-05428058v1
Predicting The Risk of Fracture of Osteosynthesis Plates Charles Savoldelli,Mohamed Syahmi Shaik,Yannick Tillier CMBBE2023 18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, May 2023, Paris, France Communication dans un congrès hal-04373848v1
A Simple and Robust Framework for Cross-Modality Medical Image Segmentation applied to Vision Transformers Matteo Bastico,David Ryckelynck,Laurent Corté,Yannick Tillier,Etienne Decencière International Conference on Computer Vision Workshops (ICCVW) 2023, Oct 2023, Paris, France. pp.4128-4138, ⟨10.1109/ICCVW60793.2023.00446⟩ Communication dans un congrès hal-04309111v1
Rheological and mechanical behaviour of polyethylene-based vitrimers Tianqi Huang,Julie Alves,Romain Castellani,Yannick Tillier,Jean-Luc Bouvard ICR 2023 International Congress on Rheology, Jul 2023, Athens, Greece Communication dans un congrès hal-04373919v1
Finite Element Modeling of The Masticatory System: Application To Bruxism Elodie Ehrmann,Feghali Sara,Marie Bernabeu,Yannick Tillier CMBBE2023 18th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, May 2023, Paris, France Communication dans un congrès hal-04373868v1
Characterization On Linear Viscoelastic Properties And Macroscopic Tensile Behaviors For PE-based Polymers With Different Chain Architectures Tianqi Huang,Julie Alves,Guillaume Corvec,Christophe Pradille,Yannick Tillieret al. 15th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting ACEX2022, Jul 2022, Florence, Italy Communication dans un congrès hal-03725465v1
Apport de la simulation numérique à la chirurgie maxillo-faciale et à l’orthopédie dento-faciale Yannick Tillier,Charles Savoldelli,Elodie Ehrmann NRC22 France, NAFEMS Regional Conference, Nov 2022, Senlis, France Communication dans un congrès hal-03878747v1
La biomécanique : de la planification opératoire à l’aide au développement de dispositifs médicaux Yannick Tillier International Conference on Science Technology and Engineering ICSTEng 2022, May 2022, Nice, France Communication dans un congrès hal-03853530v1
Mechanical characterisation of the adhesion between a silicone elastomer film and silicone gels Christophe Berto,Yannick Tillier BSSM 13th International Conference on Advances in Experimental Mechanics, Aug 2018, Southampton, United Kingdom Communication dans un congrès hal-02103828v1
In situ indentation of dental composite materials coupling micro computed tomography and digital volume correlation Marta Gallo,E. Maire,N Brulat-Bouchard,Yannick Tillier BSSM 13th International Conference on Advances in Experimental Mechanics, Aug 2018, Southampton, United Kingdom Communication dans un congrès hal-01978791v1
Mechanical characterization and numerical modeling of porcine aortic valve tissues Yannick Tillier,Colin Laville 8th World Congress of Biomechanics, Jul 2018, Dublin, Ireland Communication dans un congrès hal-01978802v1
Computational multiphysics 3D homogenization framework for the design of fast-curing dental composites Gerry Agbobada,Pierre-Olivier Bouchard,Yannick Tillier VII International Conference on Coupled Problems in Science and Engineering, Jun 2017, Rhodes Island, Greece Communication dans un congrès hal-01744141v1
Investigation of stress distribution in the temporomandibular joint during maxillofacial surgery Yannick Tillier,C Savoldelli,P.-O Bouchard EUROMECH Colloquium 595 : Biomechanics and computer assisted surgery meets medical reality, Aug 2017, Villeneuve d’Ascq, France Communication dans un congrès hal-01744152v1
USE OF CONFOCAL MICROSCOPE IMAGES FOR IMPROVING AORTIC VALVES MECHANICAL PROPERTIES CHARACTERIZATION Yannick Tillier,Colin Laville,Christophe Pradille 23rd Congress of the European Society of Biomechanics, Jul 2017, Seville, Spain Communication dans un congrès hal-01744145v1
La mécanique des organes «mous» pour planifier, voire guider les gestes chirurgicaux lors d’interventions Yannick Tillier Colloque ESI 2016, May 2016, Evry, France Communication dans un congrès hal-01485661v1
CARACTERISATION DES TISSUS DU VIVANT, IDENTIFICATION DE LOIS DE COMPORTEMENT Yannick Tillier Colloque MECAMAT 2016, Jan 2016, Aussois, France Communication dans un congrès hal-01485645v1
MECHANICAL CHARACTERISATION OF AORTIC VALVE TISSUES Colin Laville,Yannick Tillier ESB 2016, Jul 2016, Lyon, France Communication dans un congrès hal-01485655v1
Etude par éléments finis des effets de la distraction ostéogénique sur l'articulation temporo-mandibulaire Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France Communication dans un congrès hal-00861822v1
High-resolution 3D finite-element model of the temporo-mandibular joint discs during jaw closing Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Sep 2012, Vienne, Austria. p Communication dans un congrès hal-00749526v1
A Finite Element Study Of The Effects Of Distraction Osteogenesis On The Articular Disc Charles Savoldelli,Pierre-Olivier Bouchard,Yannick Tillier 18th Congress of the European Society of Biomechanics (ESB2012), Jul 2012, Lisbonne, Portugal. pp.S267, ⟨10.1016/S0021-9290(12)70268-3⟩ Communication dans un congrès istex hal-00749518v1
Numerical studies of wrinkling phenomenon in inflatable hyperelastic membranes undergoing multiaxial loadings Hicham Daanouni,Yannick Tillier,François Bay 12th ESAFORM Conference on Material Forming, Apr 2009, Enschede, Netherlands. pp.Pages 593-596, ⟨10.1007/s12289-009-0488-7⟩ Communication dans un congrès hal-00509427v1
Etude numérique d’une structure gonflable hyperélastique soumise à des sollicitations multiaxiales Hicham Daanouni,Yannick Tillier,François Bay CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France Communication dans un congrès hal-03390716v1
Etude numérique d'une structure gonflable hyperélastique soumise à des sollicitations multiaxiales Hicham Daanouni,Yannick Tillier,François Bay CFM'09 - XIXème Congrès Français de mécanique, Aug 2009, Marseille, France. 6 p Communication dans un congrès hal-00663322v1
Finite element modelling for soft tissues surgery based on nonlinear elasticity behaviour Yannick Tillier,Audrey Paccini,Jérôme Delotte,Marc Durand-Reville,Jean-Loup Chenot 18th International Congress and Exhibition on Computer Assisted Radiology and Surgery (CARS 2004), Jun 2004, Chicago, United States. p. 384-389 - ISBN 0-444-51731-6, ⟨10.1016/j.ics.2004.03.270⟩ Communication dans un congrès istex hal-00531202v1

Poster de conférence (3)

Starch aerogels, cryogels and xerogels for biomedical applications Hiba Bouras,Fangxin Zou,Yannick Tillier,Sytze Buwalda,Tatiana Budtova Advanced Functional Polymers for Medicine 2024, Jun 2024, Utrecht, Netherlands. Poster de conférence hal-04659189v1
Mechanics of hydrogel fibers and their assemblies for the design of high fatigue strength tissue substitutes Andrea Valentina Diaz Colina,Julien Caroux,Yannick Tillier,Laurent Corté NANOPOL 2023 "Nanostructured Polymers: from precision synthesis to physical properties", Sep 2023, Orléans, France Poster de conférence hal-04218847v1
Caractérisations du polyéthylène à haute densité (HDPE) et des PE-vitrimères : effet du réseau réticulé et équivalence des comportements à l’échelle macroscopique Tianqi Huang,Julie Alves,Christophe Pradille,Yannick Tillier,Jean-Luc Bouvard 30ème Edition DEformation des POlymères Solides DEPOS, Sep 2021, La Napoule, France Poster de conférence hal-03725463v1

Thèse (1)

Identification par analyse inverse du comportement mécanique des polymères solides : applications aux sollicitations multiaxiales et rapides Yannick Tillier Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1998. Français. ⟨NNT : ⟩ Thèse pastel-00001558v1

HDR (1)

De la caractérisation mécanique du comportement des matériaux à la modélisation biomécanique par éléments finis Yannick Tillier Matériaux. Université de Valenciennes et du Hainaut-Cambrésis, 2013 HDR tel-00847642v1