Alain Etienne

53
Documents

Publications

Publications

Image document

Co-design of products and next-generation manufacturing systems– return on eight years of applied research

Paul Stief , Jean Yves Dantan , Alain Etienne , Xavier Godot , Josselin Schumacker et al.
26ème Congrès Français de Mécanique (CFM 2025), AFM - Association Française de Mécanique; LEM3 - Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux; LEMTA - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée; ENSAM - Ecole Nationale Supérieure d'Arts et Métiers; CNRS - Centre national de la recherche scientifique, Aug 2025, Metz, France
Communication dans un congrès hal-05312912 v1
Image document

Co-design of products and next-generation manufacturing systems – return on eight years of applied research

Paul Stief , Jean Yves Dantan , Alain Etienne , Xavier Godot , Josselin Schumacker et al.
26ème Congrès Français de Mécanique (CFM 2025), AFM - Association Française de Mécanique; LEM3 - Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux; LEMTA - Laboratoire d'Energétique et de Mécanique Théorique et Appliquée; ENSAM - Ecole Nationale Supérieure d'Arts et Métiers; CNRS - Centre national de la recherche scientifique, Aug 2025, Metz, France
Communication dans un congrès hal-05263344 v1
Image document

Proposal of a Methodology to Improve the Level of Automation of an Assembly Line

Hasnaa Ait Malek , Alain Etienne , Ali Siadat , Thierry Allavena
IFIP WG 5.7 International Conference on Advances in Production Management Systems 2021 (APMS 2021), Sep 2021, Nantes, France. pp.433-441, ⟨10.1007/978-3-030-85902-2_46⟩
Communication dans un congrès hal-04117685 v1
Image document

A Literature Review on the Level of Automation and New Approach Proposal

Hasnaa Ait Malek , Alain Etienne , Ali Siadat , Thierry Allavena
IFIP International Conference on Advances in Production Management Systems 2020 (APMS 2020), Aug 2020, Novi Sad, Serbia. pp.408-417, ⟨10.1007/978-3-030-57993-7_46⟩
Communication dans un congrès hal-03630916 v1
Image document

New product similarity index development with application to an assembly system typology selection

Paul Stief , Jean-Yves Dantan , Alain Etienne , Ali Siadat , Guillaume Burgat
52nd CIRP Conference on Manufacturing Systems, Jun 2019, Ljubljana, Slovenia. pp.1077-1082
Communication dans un congrès hal-02280122 v1
Image document

Comprehensive Performance Expression Model for Industrial Performance Management and Decision Support

Fan Li , Alain Etienne , François Vernadat , Ali Siadat
16th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2018, Jun 2018, Bergamo, Italy. pp.558-563, ⟨10.1016/j.ifacol.2018.08.377⟩
Communication dans un congrès hal-02333024 v1
Image document

Performance Visualization in Industrial Systems for Informed Decision Making

Liaqat Ali Shah , Alain Etienne , Ali Siadat , François Vernadat
16th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2018, Jun 2018, Bergamo, Italy. pp.552-557, ⟨10.1016/j.ifacol.2018.08.376⟩
Communication dans un congrès hal-02335952 v1
Image document

Santé et sécurité au travail : quatre approches en conception pour spécifier et simuler des marges de manoeuvre pour les futurs opérateurs de production

Aurélien Lux , Ismail El Mouayni , Bruno Daille Lefevre , Jonathan Savin , Alain Etienne et al.
CIGI2017 12ème edition du Congrès International de Génie Industriel, May 2017, Compiègne, France. 8p
Communication dans un congrès hal-01560990 v1
Image document

Ingénierie de conception et sécurité des machines

Patrick Martin , Jacques Marsot , Bruno Daille-Lefevre , Alain Etienne , Aurélien Lux et al.
12 éme Congrés International de Génie Industriel, May 2017, Compiègne, France. 10p
Communication dans un congrès hal-01529875 v1
Image document

Design for safety: proposition of a model to detect hazards through energy flows analysis

Nicholas de Galvez , Jacques Marsot , Patrick Martin , Ali Siadat , Alain Etienne et al.
48th CIRP Conference on MANUFACTURING SYSTEMS, Jun 2015, Ischia (Naples), Italy. pp.1107-1112, ⟨10.1016/j.procir.2015.12.052⟩
Communication dans un congrès hal-01280755 v1
Image document

Proposition of an approach applicable during the design process of working equipment to identify potential hazards for workers

Nicholas de Galvez , Jacques Marsot , Patrick Martin , Ali Siadat , Alain Etienne
26th CIRP Design Conference, Jun 2016, Stockholm, Sweden. pp.258-263, ⟨10.1016/j.procir.2016.05.080⟩
Communication dans un congrès hal-01362538 v1
Image document

Vers l'utilisation des ontologies pour la formalisation des exigences de sécurité fondées sur la notion de situation de travail.

Yasmine Saadi , Alain Etienne , Ali Siadat , Bruno Daille-Lefevre
Xème Conférence Internationale : Conception et Production Intégrées, Dec 2015, Tanger, Maroc
Communication dans un congrès hal-01260733 v1
Image document

Modèle de coût pour l'évaluation des processus d'inspection (contrôle de conformité et suivi de fabrication)

Shirin Mirdamadi , Alain Etienne , Jean Yves Dantan , Ali Siadat , Mehrdad Mohammadi et al.
QUALITA' 2015, Mar 2015, Nancy, France
Communication dans un congrès hal-01149794 v1
Image document

CONCEPTION SURE DES EQUIPEMENTS DE TRAVAIL : PROPOSITION DE DEUX APPROCHES POUR LA PRISE EN COMPTE DES USAGES

Jacques Marsot , Bruno Daille Lefevre , Aurélien Lux , Alain Etienne , Ali Siadat
MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, Nov 2014, Nancy, France
Communication dans un congrès hal-01166652 v1
Image document

Tolerance analysis approach based on the classification of uncertainty (aleatory / epistemic)

Jean-Yves Dantan , Nicolas Gayton , Ahmed Jawad Qureshi , Maurice Lemaire , Alain Etienne
12th CIRP Conference on Computer Aided Tolerancing, Apr 2012, United Kingdom. pp.287-293, ⟨10.1016/j.procir.2013.08.044⟩
Communication dans un congrès hal-01018358 v1
Image document

Prise en compte de la sécurité dès la conception du produit, expérience pédagogique.

Patrick Martin , Cyrille Baudouin , Bruno Daille-Lefevre , Xavier Godot , Alain Etienne et al.
Démarche et innovation dans la conception et la production des systèmes intégrés, Mar 2012, France. 11p
Communication dans un congrès hal-00780193 v1
Image document

Prise en compte de la sécurité dès la conception du produit, expérience pédagogique.

Patrick Martin , Cyrille Baudouin , Bruno Daille-Lefevre , Xavier Godot , Alain Etienne et al.
Démarche et innovation dans la conception et la production des systèmes intégrés, Mar 2012, France. 11p
Communication dans un congrès hal-00781205 v1
Image document

Enabled virtual and collaborative engineering coupling PLm system to a product data kernel

Dimitri van Wijk , Alain Etienne , Emmanuel Guyot , Benoît Eynard , Lionel Roucoules
5th International Conference on Digital Enterprise Technology: from numerical simulation to intelligent cooperation, Oct 2008, Nantes, France. pp.399-415
Communication dans un congrès hal-00934083 v1
Image document

Fixturing-driven determination of multi-product assembly plans in the context of product variety and reconfiguration

Paul Stief , Jean Yves Dantan , Alain Etienne , Ali Siadat
Flexible Services and Manufacturing Journal, 2024, Special issue on 30th international conference on flexible automation and intelligent manufacturing (FAIM2021): modern manufacturing systems management, ⟨10.1007/s10696-024-09578-2⟩
Article dans une revue hal-04767328 v1
Image document

Enabling the identification of multi-product assembly system architectures – a new method and its application in the automotive industry

Paul Stief , Jean Yves Dantan , Alain Etienne , Guillaume Burgat
Journal of Engineering Design, 2024, 35 (4), pp.359-389. ⟨10.1080/09544828.2024.2318991⟩
Article dans une revue hal-04510623 v1
Image document

Evolutionary Cost-Tolerance Optimization for Complex Assembly Mechanisms Via Simulation and Surrogate Modeling Approaches: Application on Micro Gears

Amirhossein Khezri , Vivian Schiller , Edoh Goka , Lazhar Homri , Alain Etienne et al.
International Journal of Advanced Manufacturing Technology, 2023, 126 (9-10), pp.4101-4117. ⟨10.21203/rs.3.rs-2487746/v1⟩
Article dans une revue hal-04149442 v1
Image document

Contribution to the design of reconfigurable multi-product assembly systems by architecture solutions generation through a new locating-driven approach

Paul Stief , Jean Yves Dantan , Alain Etienne , Ali Siadat
CIRP Journal of Manufacturing Science and Technology, 2023, 41, pp.108-123. ⟨10.1016/j.cirpj.2022.12.003⟩
Article dans une revue hal-03953498 v1
Image document

Development and analysis of a holistic function-driven adaptive assembly strategy applied to micro gears

Amirhossein Khezri , Vivian Schiller , Lazhar Homri , Alain Etienne , Jean Yves Dantan et al.
Journal of Manufacturing Systems, 2023, 69, pp.48-63. ⟨10.1016/j.jmsy.2023.06.003⟩
Article dans une revue hal-04148869 v1
Image document

Hybrid Cost-Tolerance Allocation and Production Strategy Selection for Complex Mechanisms: Simulation and Surrogate Built-In Optimization Models

Amirhossein Khezri , Lazhar Homri , Alain Etienne , Jean-Yves Dantan
Journal of Computing and Information Science in Engineering, 2023, 23 (5), pp.051003. ⟨10.1115/1.4056687⟩
Article dans une revue hal-04143523 v1
Image document

A Framework for Integration of Resource Allocation and Reworking Concept into Design Optimisation Problem

Amirhossein Khezri , Lazhar Homri , Alain Etienne , Jean Yves Dantan , Gisela Lanza
IFAC-PapersOnLine, 2022, 55 (10), pp.1037-1042. ⟨10.1016/j.ifacol.2022.09.524⟩
Article dans une revue hal-04143408 v1
Image document

Modular cost model for Tolerance allocation, Process selection and Inspection planning

Jean Yves Dantan , Alain Etienne , Mehrdad Mohammadi , Amirhossein Khezri , Lazhar Homri et al.
Procedia CIRP, 2022, 114, pp.1-6. ⟨10.1016/j.procir.2022.10.001⟩
Article dans une revue hal-04143372 v1
Image document

An integrated resource allocation and tolerance allocation optimization: A statistical-based dimensional tolerancing

Amirhossein Khezri , Lazhar Homri , Alain Etienne , Jean Yves Dantan
Procedia CIRP, 2022, 114, pp.88-93. ⟨10.1016/j.procir.2022.10.012⟩
Article dans une revue hal-04143328 v1
Image document

A methodology for production system design driven by product modelling and analysis – application in the automotive industry

Paul Stief , Alain Etienne , Jean Yves Dantan , Ali Siadat
International Journal of Production Research, 2022, 18p. ⟨10.1080/00207543.2022.2036382⟩
Article dans une revue hal-03587606 v1
Image document

Product design improvement by a new similarity-index-based approach in the context of reconfigurable assembly processes

Paul Stief , Jean Yves Dantan , Alain Etienne , Ali Siadat , Guillaume Burgat
Journal of Engineering Design, 2020, 31 (6), pp.349-377. ⟨10.1080/09544828.2020.1748181⟩
Article dans une revue hal-02868811 v1
Image document

Tolerance & Time margin

Jean Yves Dantan , Alain Etienne , Jelena Petronijevic , Ali Siadat
Procedia CIRP, 2020, 16th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2020), 92, pp.51 - 56. ⟨10.1016/j.procir.2020.04.139⟩
Article dans une revue hal-03491387 v1
Image document

Human factors under uncertainty: A manufacturing systems design using simulation-optimisation approach

Jelena Petronijevic , Alain Etienne , Jean Yves Dantan
Computers & Industrial Engineering, 2019, 127, pp.665-676. ⟨10.1016/j.cie.2018.11.001⟩
Article dans une revue hal-03485834 v1
Image document

Human factors integration in manufacturing systems design using function–behavior–structure framework and behaviour simulations

Jean Yves Dantan , Ismail El Mouayni , Leyla Sadeghi , Ali Siadat , Alain Etienne
CIRP Annals - Manufacturing Technology, 2019, 68 (1), pp.125-128. ⟨10.1016/j.cirp.2019.04.040⟩
Article dans une revue hal-03488212 v1
Image document

A simulation-based approach for time allowances assessment during production system design with consideration of worker’s fatigue, learning and reliability

I. El Mouayni , A. Lux , A. Siadat , J-Y. Dantan , Alain Etienne
Computers & Industrial Engineering, 2019, 139, pp.105650. ⟨10.1016/j.cie.2019.01.024⟩
Article dans une revue hal-03095724 v1
Image document

Reconfigurable machining process planning for part variety in new manufacturing paradigms: Definitions, models and framework

Qing Xia , Alain Etienne , Jean-Yves Dantan , Ali Siadat
Computers & Industrial Engineering, 2018, 115, pp.206-219. ⟨10.1016/j.cie.2017.11.010⟩
Article dans une revue hal-02308320 v1
Image document

Safety of machinery: requirement specification based on functional need and work situations analysis

Mahenina Remiel Feno , Patrick Martin , Bruno Daille-Lefevre , Alain Etienne , Jacques Marsot et al.
International Journal on Interactive Design and Manufacturing, In press, ⟨10.1007/s12008-017-0447-3⟩
Article dans une revue hal-01695142 v1
Image document

Geometrical deviation identification and prediction method for additive manufacturing

Zhicheng Huang , Jean-Yves Dantan , Alain Etienne , Mickaël Rivette , Nicolas Bonnet
Rapid Prototyping Journal, 2018, 24 (9), pp.1524-1538. ⟨10.1108/RPJ-07-2017-0137⟩
Article dans une revue hal-02303230 v1
Image document

A new methodology to analyze the functional and physical architecture of existing products for an assembly oriented product family identification

Alain Etienne , Ali Siadat , Paul Stief , Jean-Yves Dantan
Procedia CIRP, 2018, 70, pp.47-52. ⟨10.1016/j.procir.2018.02.026⟩
Article dans une revue hal-01886922 v1
Image document

Cost engineering for variation management during the product and process development

Alain Etienne , Shirin Mirdamadi , Mehrdad Mohammadi , Roozbeh Babaeizadeh malmiry , Jean-François Antoine et al.
International Journal on Interactive Design and Manufacturing, 2017, 11 (2), pp.289-300. ⟨10.1007/s12008-016-0318-3⟩
Article dans une revue hal-02335892 v1
Image document

AEN-PRO: Agent-based simulation tool for performance and working conditions assessment in production systems using workers’ margins of manoeuver

I. El Mouayni , Alain Etienne , Ali Siadat , Jean-Yves Dantan , Aurélien Lux
IFAC-PapersOnLine, 2017, 50 (1), pp.14236-14241. ⟨10.1016/j.ifacol.2017.08.2102⟩
Article dans une revue hal-02335647 v1
Image document

EZID: A new approach to hazard identification during the design process by analysing energy transfers

Nicholas de Galvez , Jacques Marsot , Patrick Martin , Ali Siadat , Alain Etienne
Safety Science, 2017, 95, pp.1-14. ⟨10.1016/j.ssci.2017.02.001⟩
Article dans une revue hal-02309165 v1
Image document

Geometrical variations management for additive manufactured product

Jean-Yves Dantan , Zhicheng Huang , Edoh Goka , Lazhar Homri , Alain Etienne et al.
CIRP Annals - Manufacturing Technology, 2017, 66 (1), pp.161-164. ⟨10.1016/j.cirp.2017.04.034⟩
Article dans une revue hal-02308242 v1
Image document

FMEA and consideration of real work situations for safer design of production systems

Aurélien Lux , Johann Mawo de Bikond , Alain Etienne , Edwige Quillerou-Grivot
International Journal of Occupational Safety and Ergonomics, 2016, 22 (4), pp.557-564. ⟨10.1080/10803548.2016.1180856⟩
Article dans une revue hal-01345324 v1
Image document

Process-oriented Risk Assessment Methodology for Manufacturing Processes Evaluation

Liaqat A. Shah , Alain Etienne , Ali Siadat , François Vernadat
International Journal of Production Research, 2016, 55 (15), pp.4516-4529. ⟨10.1080/00207543.2016.1268728⟩
Article dans une revue hal-02333489 v1
Image document

Performance evaluation of collaboration in the design process: Using interoperability measurement

Amir Pirayesh Neghab , Alain Etienne , Mathias Kleiner , Lionel Roucoules
Computers in Industry, 2015, 72, pp.14-26. ⟨10.1016/j.compind.2015.03.011⟩
Article dans une revue hal-02534471 v1
Image document

Methodology to develop a geometric modeling process according to collaborative constraints

Xavier Godot , Alain Etienne , Ali Siadat , Patrick Martin
International Journal on Interactive Design and Manufacturing, 2014, pp.1-18. ⟨10.1007/s12008-014-0238-z⟩
Article dans une revue hal-01205851 v1
Image document

Cost estimation method for variation management

S. Mirdamadi , Alain Etienne , Alaa Hassan , J.Y. Dantan , Ali Siadat
Procedia CIRP, 2013, 10 (2), pp.44-53. ⟨10.1016/j.procir.2013.08.011⟩
Article dans une revue hal-02168303 v1
Image document

VR-PMS: a new approach for performance measurement and management of industrial systems

Francois B. Vernadat , Liaqat Shah , Alain Etienne , Ali Siadat
International Journal of Production Research, 2013, 51 (23-24), pp.7420-7438
Article dans une revue hal-01081311 v1
Image document

Specifications and Development of Interoperability Solution dedicated to Multiple Expertise Collaboration in a Design Framework

Alain Etienne , Emmanuel Guyot , Dimitri van Wijk , Lionel Roucoules
International Journal of Product Lifecycle Management, 2011, 5 (2/3/4), p. 272-274
Article dans une revue hal-00749865 v1
Image document

Activity Based Tolerance Allocation (ABTA) – Driving tolerance synthesis by evaluating its global cost

Alain Etienne , Jean-Yves Dantan , Ali Siadat , Patrick Martin
International Journal of Production Research, 2009, 47 (18), pp.4971-4989. ⟨10.1080/00207540701819225⟩
Article dans une revue hal-00513020 v1
Image document

An improved approach for automatic process plan generation of complex borings

Alain Etienne , Jean-Yves Dantan , Ali Siadat , Patrick Martin
Computers in Industry, 2006, 7 (57), pp.663-675. ⟨10.1016/j.compind.2006.03.002⟩
Article dans une revue hal-01022739 v1
Image document

Safety of Manufacturing Equipment: Methodology Based on a Work Situation Model and Need Functional Analysis

Mahenina Remiel Feno , Patrick Martin , Bruno Daille-Lefevre , Alain Etienne , Jacques Marsot et al.
Advances on Mechanics, Design Engineering and Manufacturing, Innovative Design, Springer International Publishing, pp.1149-1157, 2016, 978-3-319-45780-2
Chapitre d'ouvrage hal-02309413 v1