
Anne-Françoise Gourgues-Lorenzon
Présentation
Anne-Françoise GOURGUES-LORENZON - Professeur, Ecole nationale supérieure des mines de Paris - PSL
Née en 1970
Mines Paris, PSL University, Centre des Matériaux, UMR CNRS 7633
CURSUS
· 1992 : Ingénieur Civil, Ecole des Mines de Paris, option « Sciences et Génie des Matériaux ».
· 1993 : DEA « Mécanique et Matériaux », Université Paris XIII.
· 1997 : Doctorat en Sciences et génie des matériaux, Ecole des Mines de Paris.
· 1998 : Post-doctorat, Imperial College (Londres).
· 1999 : Maître-assistant (1999) à l’Ecole des Mines de Paris, Centre des Matériaux.
· 2007 : HDR (Institut National Polytechnique de Lorraine).
· Depuis 2008 : professeur à l’Ecole des Mines de Paris, Centre des Matériaux.
Encadrement : 23 stagiaires (deuxième et troisième années Ecole, DEA/M2R, mastère), 52 thèses (47 soutenues, 5 en cours) en collaboration interne et/ou externe au laboratoire, 2 post-doctorats. Trois de ces doctorants ont obtenu un prix Bodycote-SF2M : S. Dépinoy (2015), A. Hermant (2016), H. Godin (2019). Deux ont obtenu un Prix Jacquet SF2M : R. Chosson (2015), C. Varenne (2019). N. Cliche a obtenu le Prix Amiral Daveluy 2020 de la Marine Nationale et le Prix de thèse 2020 de l'Académie de marine (sciences exactes et naturelles).
DISTINCTIONS SCIENTIFIQUES
· 2001 Cook-Ablett Award (Institute of Materials, London) : best paper in Materials Science and Technology.
· 2004 Prix Jean Rist (SF2M).
· 2004 Best Paper in Fatigue and Fracture of Engineering Materials and Structures.
· 2013 Prix du meilleur « Jeu sérieux - Etude de cas » pour les ECSPER - Rupture au Festival du Film Universitaire Pédagogique de 2013.
· 2019 Médaille Bastien-Guillet (SF2M).
Initiée au monde des matériaux par (entre autres) André Pineau dans le cycle Ingénieurs civils de l’Ecole des Mines de Paris, j’ai poursuivi ma formation par la recherche avec le DEA Mécanique et Matériaux (1993) puis une thèse de doctorat sous la direction d’Éric Andrieu, toujours à l’Ecole des Mines, portant sur la fissuration des alliages base nickel assistée par l’environnement. A l’occasion d’un post-doctorat à l’Imperial College de Londres, je plonge dans le vaste univers des aciers, m’initiant en particulier aux arcanes des transformations bainitiques ainsi qu’à un tout nouvel outil maintenant bien répandu : la diffraction des électrons rétrodiffusés (EBSD). De retour au Centre des Matériaux comme maître-assistant puis professeur, j’y lance l’activité EBSD tout en abordant les relations entre transformations de phases, microstructures induites et propriétés mécaniques (plasticité, fluage, rupture) d’alliages métalliques : aciers, alliages d’aluminium, de zirconium.
Ma pratique d’enseignement comprend des activités traditionnelles (cours et TD, encadrement de projets de laboratoire, de stages, animation de l’option Sciences et Génie des Matériaux de l’Ecole des Mines jusqu'en 2021). Je participe aussi à des activités plus innovantes telles que l’élaboration d’un « serious game » sur la rupture (2013). Nous avons aussi l’opportunité de monter de nombreuses visites d’entreprises, mêlant de plus en plus doctorants et élèves ingénieurs, ainsi que des projets courts en entreprise, qui donnent aux élèves un aperçu du travail en groupe de projet ad hoc pour faire avancer rapidement une problématique en mobilisant tous les moyens « du bord ». La valorisation des supports pédagogiques (transparents et podcasts des cours, TD, études de cas détaillées) sur le site de l’Ecole des Mines est opérationnelle depuis plus de 12 ans. J’ai un petit « faible » pour les activités de type « ma (ou : sa) thèse en un exercice corrigé », qui a fourni une bonne douzaine d'études de cas, mises sur le même site après avoir servi de sujet d’examen.
Ma principale action d’enseignement reste la formation doctorale. La recherche d’un point de fonctionnement différent pour chaque doctorant(e), dans le contexte de ses travaux de recherche, de la manière de l’aider à « grandir » scientifiquement et à mûrir son projet professionnel, est pour moi aussi passionnante et indispensable que les avancées scientifiques apportées par les travaux de thèse des jeunes chercheurs. Je suis responsable de la spécialité doctorale "Sciences et génie des matériaux" de l'ED 621 ISMME depuis 2020.
Publications
Publications
|
Quantitative Characterization of Ductility for Fractographic AnalysisECMI: European Consortium for Mathematics in Industry 2021, ECMI, Apr 2021, Wupperthal, Germany. pp.349-355, ⟨10.1007/978-3-031-11818-0_46⟩
Communication dans un congrès
hal-03886886
v1
|
Metallurgical Approach for the Development of Heat Treatment Applied to 316L Stainless Steel Cold Spray CoatingsITSC2021, May 2021, Virtual, France. pp.177-188, ⟨10.31399/asm.cp.itsc2021p0177⟩
Communication dans un congrès
hal-03499958
v1
|
|
Effect of matrix microstructure and second-phase particles on the damage behaviour of hot stamped martensitic steels for automotive applicationsVirtual European Conference on Fracture 2020, Jun 2020, Virtual conference, France
Communication dans un congrès
hal-04088260
v1
|
|
|
Microstructure, comportement plastique et transition ductile-fragile d'un acier medium Mn dit "à basse densité" pour application automobileJournées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p
Communication dans un congrès
hal-01631399
v1
|
|
Quelques exemples d'activités pédagogiques dans le domaine des matériauxJournées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p
Communication dans un congrès
hal-01631406
v1
|
|
Mechanical behavior at high temperature of highly oxygen- or hydrogen-enriched α and (prior-) $\beta$ phases of zirconium alloys18th International Symposium on Zirconium in the Nuclear Industry, May 2016, Hilton Head, United States
Communication dans un congrès
cea-02442337
v1
|
|
Mechanical behavior at high temperature of highly oxygen- or hydrogen-enriched $\alpha$ and (prior-)$\beta$ phases of zirconium alloys18th International Symposium on Zirconium in the Nuclear Industry, May 2016, Hilton Head, United States
Communication dans un congrès
hal-02441977
v1
|
|
Mechanical behavior at high temperatures of highly oxygen- or hydrogen-enriched α and (Prior-) β phases of zirconium alloys18th International symposium on zirconium in the nuclear industry, May 2016, Hilton Head Island, SC, United States. pp.240-280, ⟨10.1520/STP159720160063⟩
Communication dans un congrès
hal-01702107
v1
|
Hot deformation behaviour and recrystallization mechanisms in a niobium stabilized austenitic stainless steel6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), Jul 2016, Pittsburgh, United States. pp.209-214, ⟨10.1007/978-3-319-48770-0-31⟩
Communication dans un congrès
hal-01496684
v1
|
|
Evolution of microstructure during tempering and its influence on the mechanical behavior of 2.25Cr-1Mo bainitic steelPTM 2015 - International conference on solid-solid phase transformations in inorganic materials, Jun 2015, Whistler, Canada. 8 p
Communication dans un congrès
hal-01292313
v1
|
|
|
Propriétés mécanique à haute température d'aciers ODS ferritiques à 14%CrJournées annuelles de la SF2M – JA2015, Oct 2015, Paris, France
Communication dans un congrès
hal-02445716
v1
|
|
Quantitative investigation of brittle out-of-plane fracture in X70 pipeline steel20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.1149-1154, ⟨10.1016/j.mspro.2014.06.187⟩
Communication dans un congrès
hal-01053645
v1
|
|
Creep behavior at high temperature of the oxygen stabilized zirconium alpha phase of fuel cladding tubes oxidized in loca conditionsLWR Fuel Performance Meeting / Top Fuel 2013, Sep 2013, Charlotte, United States. pp.520-527
Communication dans un congrès
hal-01427453
v1
|
|
Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy13th international conference on fracture, Jun 2013, Beijing, China. 10 p
Communication dans un congrès
hal-00853558
v1
|
|
Damage of TWIP steels for automotive applicationInternational conference on fracture, Jul 2009, Ottawa, Canada. 10 p
Communication dans un congrès
hal-00822287
v1
|
|
Delamination of pipeline steels : determination of an anisotropic cleavage criterion21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p
Communication dans un congrès
hal-00938363
v1
|
|
Local approach applied to the fracture toughness of resistance spot welds13th international conference on fracture, Jun 2013, Beijing, China. 10 p
Communication dans un congrès
hal-00853411
v1
|
Micromechanical modelling of microtexture formation in low alloy steel bainiteSolid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.1228-1233, ⟨10.4028/www.scientific.net/SSP.172-174.1228⟩
Communication dans un congrès
hal-00619807
v1
|
|
Mise en place d'un test de fatigue-corrosion des ressorts de suspension automobileJournées jeunes chercheurs 2011, Jul 2011, Lyon, France. pp.139-143
Communication dans un congrès
hal-00639341
v1
|
|
|
Striction de l'acier 9Cr-1Mo modifié sollicité en fluageXIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p
Communication dans un congrès
hal-00664500
v1
|
Effect of the metallurgical state of austenite on the microtexture properties of the bainitic transformation in a low alloy steelSolid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.772-777, ⟨10.4028/www.scientific.net/SSP.172-174.772⟩
Communication dans un congrès
hal-00624009
v1
|
|
|
High temperature creep properties and microstructural examinations of P92 welds9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.424-434
Communication dans un congrès
hal-00592240
v1
|
|
Propriétés en fluage à haute température et caractérisations microstructurales des joints soudés P92Matériaux 2010, Oct 2010, Nantes, France. 12 p
Communication dans un congrès
hal-00570554
v1
|
|
Long term aging effect on the creep strength of the T92 steel9th Liege conference : materials for advanced power engineering 2010, Sep 2010, Liege, Belgium. pp.239-248
Communication dans un congrès
hal-00592020
v1
|
|
Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloyFracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p
Communication dans un congrès
hal-00541248
v1
|
|
Damage mechanisms of ultrahigh strength steels in bending application to a trip steelFracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p
Communication dans un congrès
hal-00541087
v1
|
|
Influence of strain rate on P92 microstructural stability during fatigue tests at high temperatureFatigue 2010, Jun 2010, Prague, Czech Republic. pp.2141-2150, ⟨10.1016/j.proeng.2010.03.230⟩
Communication dans un congrès
hal-00509939
v1
|
Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloy (AA-2198)JP 2010 - 29èmes journées de printemps, May 2010, Paris, France. pp.139-146
Communication dans un congrès
hal-00509606
v1
|
|
|
Modelling of necking during creep of grade 91 steelFracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p
Communication dans un congrès
hal-00541287
v1
|
Creep strength and microstructural evolution of 9-12%Cr heat resistant steels during creep exposure at 600°C and 650°C9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.259-269
Communication dans un congrès
hal-00592232
v1
|
|
|
Formation et solidification de la zone fondue en soudage par point : influence des paramètres de soudageMatériaux 2010, Oct 2010, Nantes, France. 12 p
Communication dans un congrès
hal-00570567
v1
|
|
Estimation de la durée de vie d'un collecteur en acier P91Matériaux 2010, Oct 2010, Nantes, France. 8 p
Communication dans un congrès
hal-00570583
v1
|
Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.477-487
Communication dans un congrès
hal-00411745
v1
|
|
Metallurgical properties and creep behaviour of a grade 91 steel base metal and weldment after short-term exposure at 500°C2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.906-918
Communication dans un congrès
hal-00413221
v1
|
|
|
Study of the microstructure of the grade 91 steel after more than 100 000h of creep exposure at 600°C2nd ECCC International Conference on Creep and Fracture in High Temperature Components: Design and Life Assessment Issues, Apr 2009, Zurich, Switzerland. pp.877-888
Communication dans un congrès
hal-00413783
v1
|
EBSD investigation of phase transformation in low carbon steelsMaterials processing and texture, Jun 2008, Pittsburgh, United States. pp.243-250, ⟨10.1002/9780470444191.ch26⟩
Communication dans un congrès
hal-00871233
v1
|
|
|
Microstructure evolution in base metal and welded joint of Grade 91 martensitic steels after creep at 500-600°CECF 17, Sep 2008, Brno, Czech Republic. pp.1095-1102
Communication dans un congrès
hal-00329783
v1
|
On the size of the representative volume element for isotropic elastic polycrystalline copperIUTAM symposium on mechanical behavior and micro mechanics of nanostructured materials, 2007, Beijing, China. pp.171-180
Communication dans un congrès
hal-00148578
v1
|
|
Influence of the shear cutting process on damage in laboratory dual phase steels developed for automotive applicationMaterials science and technology (MS&T 07), Sep 2007, Detroit, United States. pp.171-181
Communication dans un congrès
hal-00182985
v1
|
|
|
Numerical generation and study of synthetic bainitic microstructuresMatériaux 2006, 2006, Dijon, France. 12 p
Communication dans un congrès
hal-00144530
v1
|
Microstructures and mechanical properties of simulated heat affected zone in X100 pipeline steel girth weldsLocal approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.135-140
Communication dans un congrès
hal-00142204
v1
|
|
Influence of the cutting process on damage in dual phase steels, in : Local approach to fractureEUROMECH-MECAMAT 2006, 9th European mechanics of materials conference, 2006, Moret sur Loing, France. pp.265-270
Communication dans un congrès
hal-00146241
v1
|
|
|
Brittle fracture in heat-affected zones of girth welds of modern line pipe steel (X100)Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 7 p
Communication dans un congrès
hal-00146312
v1
|
Modelling high temperature creep flow, damage, and fracture behaviour of 9Cr1Mo-NbV steel weldmentsECCC Creep conference, 2005, London, United Kingdom. pp.758-771
Communication dans un congrès
hal-00160200
v1
|
|
Critères d'amorçage et de propagation des fissures dans les zones affectées thermiquement de canalisations à haute résistance – X100Colloque national Mecamat, 2005, Aussois, France. 4 p
Communication dans un congrès
hal-00160362
v1
|
|
Caractérisation cristallographique par EBSD de la microstructure et de la fissuration des aciers inoxydables austéno-ferritiques moulésL'analyse EBSD : principes et applications, Dec 2002, Paris, France. pp.101-109
Communication dans un congrès
hal-00165961
v1
|
|
|
Creep failure model of a 9Cr1Mo-NvV (P91) steel integrating multiple deformation and damage mechanismsAdvanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p
Communication dans un congrès
hal-00165064
v1
|
Grain size effects on the mechanical behaviour of open-cell nickel foamsInternational conference on cellular metals and metal foaming technology, 2003, Berlin, Germany. pp.419-424
Communication dans un congrès
hal-00165906
v1
|
|
MEALOR II Damage Mechanics and Local Approach to FractureCERN - European Organization for Nuclear Research, 441 p., 2023, ⟨10.5281/zenodo.10125170⟩
Ouvrages
hal-04288497
v1
|
Matériaux pour l'ingénieurPresses de l'Ecole des Mines de Paris, 390 p., 2006
Ouvrages
hal-00142499
v1
|
Introduction à la diffraction des électrons rétrodiffusésed. F. Brisset. EBSD : Analyse par diffraction des électrons rétrodiffusés ; applications et techniques couplées, EDP Sciences, pp.1-28, 2015, 9782759819126
Chapitre d'ouvrage
hal-01289458
v1
|
|
Interactions mécanique-oxydation à haute température dans l'alliage 600 : application à la fissuration dans le milieu primaire des réacteurs nucléaires à eau sous pressionMatériaux. École Nationale Supérieure des Mines de Paris, 1997. Français. ⟨NNT : 1997ENMP0788⟩
Thèse
pastel-00737015
v1
|
|
Relations entre microstructure, microtexture de transformations de phases et propriétés mécaniques d'alliages métalliquesMatériaux. Institut National Polytechnique de Lorraine (INPL), 2007
HDR
tel-03661990
v1
|