Présentation

Section CNU 28 (Milieux Denses et Matériaux)

Projet de recherche actuel

Caractérisation microstructurale de biopolymères. Diffraction des Rayons X (DRX). Diffusion des Rayons X aux petits angles (SAXS) en collaboration avec Université de Lille. Calorimétrie Différentielle à Balayage avec Modulation de Température (MT-DSC). Fast Scanning Calorimetry (FSC). Microscopie Optique en Lumière Polarisée (POM). Spectroscopie Diélectrique Large Bande (BDS). Analyse Mécanique Dynamique (DMA).

Relations microstructure-propriétés. Etude des modes de relaxation structurale et secondaire dans les biopolymères en fonction de l’architecture macromoléculaire et de la microstructure. Description microstructurale selon des modèles à deux et trois phases, prenant en compte le couplage entre les phases ordonnées et désordonnées.

Situation actuelle Maître de Conférences (recrutement rentrée 2010, titularisation rentrée 2011)

Auparavant

  • 2009-2010 ATER à temps plein (192h eq. TD) Site de Pasturgie de l'INSA de Lyon, Oyonnax
  • 2008-2009 ATER à temps plein (192h eq. TD) Site de Pasturgie de l'INSA de Lyon, Oyonnax
  • 2005-2008 Doctorat de recherche (allocation MNESR) Ingénierie des Matériaux Polymères (IMP) UMR CNRS #5223, Laboratoire des Matériaux Macromoléculaires (LMM), INSA de Lyon (soutenance 5 décembre 2008)
  • 2003 Erasmus (4 mois, 3 examens validés) Luleå Tekniska Universitet (Suède)
  • 1998-2005 Master thesis (BAC+5) Università degli Studi di Perugia, Ingénierie des Matériaux + Università degli Studi di Napoli "Federico II", Ingénierie des Matériaux et de la Production (soutenance 25 février 2005)

Diplômes

  • 2008 Diplôme de Docteur (BAC+8) INSA de Lyon, Matériaux Polymères et Composites, Très honorable avec félicitations du jury (docteur à l'honneur lors de la cérémonie de remise des diplômes de l'INSA)
  • 2005 Diplôme d'Ingénieur des Matériaux (BAC+5) Università degli Studi di Perugia (Italie), Matériaux Innovants, Très bien avec félicitations du jury (110/100 cum laude)
  • 1998 Baccalauréat (BAC), Lycée Littéraire Classique d'Etat "G.C.Tacito" (Italie), Plan National d'Informatique (PNI), Très bien avec félicitations du jury (60/60) (meilleur élève du lycée, meilleur élève au baccalauréat, meilleur élève en mathématiques)

Langues Italien (langue maternelle), Français (courant), Anglais (courant), Espagnol (notions)

Prix

  • Docteur à l’honneur INSA de Lyon 2008
  • Lauréate du concours scientifique national SAMPE France 2007
  • 1er prix concours artistiques nationaux (Italie) : CIF 1993, LNI 1993, CIAS 1993, 1994, 1996 et 1998
  • Bourses d’étude (mérite) : bourses régionales annuelles de 1998 à 2005, Borrello 1998 (meilleur élève en mathématiques), Secci 1998 (meilleur élève du lycée), TOE 1998 (meilleur élève au baccalauréat)

Organisation d'événements scientifiques

  • JCAT50 (50èmes Journées de Calorimétrie et d’Analyse Thermique), St-Valery-en-Caux, June 3-5, 2019
  • SDM1 (1er Colloque Français sur la Spectroscopie Diélectrique appliquée à la caractérisation des Matériaux), Rouen, June 8, 2017
  • POLYCHAR23 (23rd World Forum on Advanced Materials), Lincoln, Nebraska, March 11-15, 2015
  • KaSAM-2014 (2nd Kathmandu Symposia on Advanced Materials), Kathmandu, Nepal, Sept 7-10, 2014
  • JCAT45 (45èmes Journées de Calorimétrie et d’Analyse Thermique), Rouen, May 20-23, 2014
  • RoSAM (Rouen Symposia on Advanced Materials), Rouen, June 5-7, 2013
  • KaSAM-2012 (1st Kathmandu Symposia on Advanced Materials), Kathmandu, Nepal, May 9-12, 2012
  • POLYCHAR19 (19th World Forum on Advanced Materials), Kathmandu, Nepal, March 20-24, 2011
  • Stage pédagogique GFP « Formulation, mise en forme et cycle de vie des matériaux polymères », Oyonnax, June 2-5, 2009
  • SAMPE France (Journée Nationale de Sélection Etudiants 3ème cycle), Lyon, March 11, 2008
  • NANOFUN-POLY (2nd International Symposium on NANOstructured and FUNctional POLYmer-based Materials and Nanocomposites), Lyon, May 29-31, 2006

Accompagnement aux services R&D et R&T (2010-auj)

Zodiac Aerosafety Systems (aujourd'hui Safran Aerosystems) (projets ELASTOCOL et THESIS), L’Oréal, Sealed Air, APTAR Pharma, Nutriset, Sogefi Filtrauto, EnergySol R&D…

Projets de recherche collaboratifs

  • SCAMPI (Solutions pour la Conception et l’Analyse de Matériaux à Propriétés Innovantes), 2016-2020, CPER 2016 Région Normandie + FEDER, 1 461 977 €, porté par Valérie DUPRAY (SMS, Université de Rouen Normandie) : co-encadrement d'une thèse avec Eric DARGENT (GPM-EIRCAP) (Aurélie BOURDET, soutenance prévue fin 2019)
  • THESIS (THermoplastic Erosion Shield for new generation Ice protection System), 2017-2021, FEDER/FSE-IEJ 2014-2020 Région Normandie, porté par Sébastien VERNAY (Responsable R&T, Safran Aerosystems), participation au suivi scientifique d'un post-doc avec Benoît VIEILLE (GPM-ERMECA) (Steven ARAUJO, fin août 2019)
  • FARM (Influence de la Fraction Amorphe Rigide sur les propriétés Mécaniques et physiques des polymères semi-cristallins : contexte aéronautique), 2017-2019, RIN Recherche Région Normandie, porté par Laurent DELBREILH (GPM-EIRCAP), participation au suivi scientifique d'un post-doc avec Loïc Le PLUART (ENSICAEN) (Yoga Sugama SALIM, fin août 2019)

Encadrement d'activités de recherche

Thèses : Emilie BOUTHEGOURD 17% (octobre 2010 - janvier 2014), Aurélie BOURDET 50% (octobre 2016 - en cours), Clément FOSSE 50% (octobre 2017 - en cours)

Stages : chaque année, encadrement ou suivi de plusieurs étudiants dans différentes filières (M2 EMME-SdM, M1 SdM, L3 Phys-SGM) lors de stages en laboratoire (recherche fondamentale et appliquée) ou en industrie (services R&D et R&T) effectués en France comme à l’étranger (USA, Suède, Italie, Pays-Bas…).

Activités d'enseignement (actuellement)

  • 2010-auj (une semaine par an) Visiting Adjunct Research Assistant Professor (Department of Mechanics and Materials Engineering, University of Nebraska-Lincoln, USA)
  • « FTIC » (L1)
  • « Plasturgie » (L3 Phys-SGM)
  • « Anglais » (L3 Phys-SGM)
  • « Contraintes Produits Emballés » (L3 Packaging, Evreux)
  • « Viscoélasticité » (M1 SdM)
  • « Dégradation mécanique des polymères » (GP4, ESITech)
  • « Biopolymères et biocomposites » (M2 SdM-GdM)
  • « Biopolymères » (MECA5, INSA Rouen) (vacation)
  • « Polymères: recyclabilité et dégradabilité » (Master MecaMat, INSA Rouen) (vacation)
  • « Caractérisation des polymères à l'état solide » (M2 Crist/PS/AS)
  • « Why and how polymers go green? » (short-course, graduate students, UNL)
  • Parrainage « Un chercheur, un enseignant, une classe » (Lycée Le Corbusier à Saint-Etienne-du-Rouvray, Lycée de la Côte d’Albâtre à Saint-Valéry-en-Caux, Lycée Galilée à Franqueville St-Pierre)

Responsabilités administratives et/ou pédagogiques

  • 2016-auj Coordinatrice de la mobilité Erasmus entrante et sortante des étudiants dans le Département de Physique (UFR Sciences et Techniques, Université de Rouen Normandie)
  • 2016-auj Coordinatrice des stages dans le cadre du Master "Sciences de la Matière" (Université de Rouen Normandie), avec Bertrand RADIGUET (M1) et Allisson SAITER (M2)
  • 2012-auj Coordinatrice de la mobilité internationale des étudiants et des enseignants-chercheurs dans le cadre du Double Diplôme URN-UNL “Sciences de la Matière” (Université de Rouen Normandie) avec les Graduate Studies du College of Engineering (University of Nebraska-Lincoln, USA)
  • 2013 Coordinatrice des échanges internationaux d'étudiants en licence (undergraduate) dans le cadre du programme U-RASE entre la France et les USA, en collaboration avec Laurent LEBREILH (Université de Rouen), Li TAN (University of Nebraska-Lincoln, NE), Susan Enders (Doane College, NE) et Constantine Tarawneh (UTPA, TX)

Publications

17
11
7
3
3
2
2
2
1
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
16
14
10
9
9
7
6
6
6
5
4
4
4
4
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
4
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
7
2
3
2
1
6
4
1
2
5
5
1
3
5
1
1
30
8
10
1

Publications

Joys and struggles of polyesters often melt down to crystallisation challenges

Antonella Esposito

Polymer, 2026, Special Issue to celebrate the 100th Birthday Anniversary of Prof. Andrew Keller, 363, pp.130543. ⟨10.1016/j.polymer.2026.130543⟩

Article dans une revue hal-05709181v1
Deposit thumbnail

Crystallization behavior of co-polyesters based on hydroxy fatty acids extracted from tomato peel agro-wastes

Kylian Hallavant , Antonella Esposito , Bénédicte Bakan , Denis Lourdin , Allisson Saiter-Fourcin

Polymer, 2026, 342, pp.129314. ⟨10.1016/j.polymer.2025.129314⟩

Article dans une revue hal-05366298v2
Deposit thumbnail

Introducing the Critical Cooling Rate estimated by Fast Scanning Calorimetry into the Fourier–Biot framework to estimate the thickness limits for quenching polymer films

Md Koushic Uddin , Jason Sury , Alessandro Sannino , Antonella Esposito , Antonio Greco

Polymer Testing, 2026, 159, pp.109188. ⟨10.1016/j.polymertesting.2026.109188⟩

Article dans une revue hal-05604899v1

The Universality of Cooperative Fluctuations in Glass-Forming Supercooled Liquids

Jürgen Schawe , Kylian Hallavant , Antonella Esposito , Jörg Löffler , Allisson Saiter-Fourcin

Journal of Physical Chemistry Letters, 2025, pp.12255-12265. ⟨10.1021/acs.jpclett.5c03185⟩

Article dans une revue hal-05374592v1

Influence of Chemical Composition and Structure on the Cooperative Fluctuation in Supercooled Glass-Forming Liquids

Kylian Hallavant , Marouane Mejres , Jürgen Schawe , Antonella Esposito , Allisson Saiter-Fourcin

Journal of Physical Chemistry Letters, 2024, 15 (16), pp.4508-4514. ⟨10.1021/acs.jpclett.4c00632⟩

Article dans une revue hal-04570400v1
Deposit thumbnail

Silk foams with metallic nanoparticles as scaffolds for soft tissue regeneration

Claire de Lartigue , Cristina Belda Marín , Vincent Fitzpatrick , Antonella Esposito , Sandra Casale et al.

International Journal of Molecular Sciences, 2024, 25 (22), pp.12377. ⟨10.3390/ijms252212377⟩

Article dans une revue hal-04798722v1

Synthesis and properties of poly (alkylene trans-1,4-cyclohexanedicarboxylate)s with different glycolic subunits

Giulia Guidotti , Clément Fosse , Michelina Soccio , Massimo Gazzano , Valentina Siracusa et al.

Polymer Degradation and Stability, 2024, 230, pp.111050. ⟨10.1016/j.polymdegradstab.2024.111050⟩

Article dans une revue hal-04766109v1
Deposit thumbnail

Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate)

Kylian Hallavant , Michelina Soccio , Giulia Guidotti , Nadia Lotti , Antonella Esposito et al.

Polymers, 2024, A Commemorative Issue in Honor of Professor Jose M. Kenny: Advances in Polymer Composites and Nanocomposites, 16 (19), pp.2792. ⟨10.3390/polym16192792⟩

Article dans une revue hal-04716992v1
Deposit thumbnail

Beyond 2,5-furandicarboxylic acid: status quo , environmental assessment, and blind spots of furanic monomers for bio-based polymers

Mattia Annatelli , Julián Sánchez-Velandia , Giovanna Mazzi , Simão Pandeirada , Dimitrios Giannakoudakis et al.

Green Chemistry, 2024, ⟨10.1039/D4GC00784K⟩

Article dans une revue hal-04574146v1
Deposit thumbnail

Physical aging of a biodegradable alicyclic polymer: poly (pentamethylene trans-1,4-cyclohexanedicarboxylate)

Marouane Mejres , Kylian Hallavant , Giulia Guidotti , Michelina Soccio , Nadia Lotti et al.

Journal of Non-Crystalline Solids, 2024, 629, pp.122874. ⟨10.1016/j.jnoncrysol.2024.122874⟩

Article dans une revue hal-04470836v1

Mechanical and surface properties of standard writing and printing papers coated with alternating layers of Amazonian Paricá nanofibrils and cassava starch

Mário Vanoli Scatolino , Rafael Rodolfo de Melo , Edgley Alves de Oliveira Paula , Maria Alice Martins , Gustavo Henrique Denzin Tonoli et al.

Journal of Materials Science, 2024, ⟨10.1007/s10853-024-09827-7⟩

Article dans une revue hal-04607837v1
Deposit thumbnail

Microstructural consequences of isothermal crystallization in homo- and co-polyesters based on 2,5- and 2,4-furandicarboxylic acid

Aurélie Bourdet , Clément Fosse , Marie-Rose Garda , Shanmugam Thiyagarajan , Laurent Delbreilh et al.

Polymer, 2023, pp.125835. ⟨10.1016/j.polymer.2023.125835⟩

Article dans une revue hal-04020682v1

Effect of Chemical Composition on Molecular Mobility and Phase Coupling in Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with Different Comonomer Contents

Clément Fosse , Antonella Esposito , Pierre Lemechko , Yoga Sugama Salim , Valerio Causin et al.

Journal of Polymers and the Environment, 2023, ⟨10.1007/s10924-023-02882-2⟩

Article dans une revue hal-04095807v1
Deposit thumbnail

Physical aging effect on viscoelastic behavior of polymers

S.G. Nunes , R. Joffe , N. Emami , P. Fernberg , S. Saseendran et al.

Composites Part C: Open Access, 2022, 7, pp.100223. ⟨10.1016/j.jcomc.2021.100223⟩

Article dans une revue hal-03500544v1

Cooperativity and fragility in furan-based polyesters with different glycolic subunits as compared to their terephthalic counterparts

Clément Fosse , Antonella Esposito , Shanmugam Thiyagarajan , Michelina Soccio , Nadia Lotti et al.

Journal of Non-Crystalline Solids, 2022, 597, pp.121907. ⟨10.1016/j.jnoncrysol.2022.121907⟩

Article dans une revue hal-03779120v1

Influence of selected parameters on DSC characterization of high-protein materials: the case of raw and roasted peanuts

Chloé Sainlaud , Maxime Bohin , Jean Grenet , Antonella Esposito

European Food Research and Technology, 2022, 248 (9), pp.2275-2284. ⟨10.1007/s00217-022-04042-7⟩

Article dans une revue hal-03779127v1
Deposit thumbnail

On the improvement of thermo-mechanical behavior of carbon/polyphenylene sulfide laminated composites upon annealing at high temperature

Benoît Vieille , E. Ernault , Nicolas Delpouve , J-D. Pujols Gonzalez , Antonella Esposito et al.

Composites Part B: Engineering, 2021, 216, pp.108858. ⟨10.1016/j.compositesb.2021.108858⟩

Article dans une revue hal-03192259v1
Deposit thumbnail

Molecular mobility in amorphous biobased copolyesters obtained with 2,5- and 2,4-furandicarboxylate acid

Aurélie Bourdet , Steven Araujo , Shanmugam Thiyagarajan , Laurent Delbreilh , Antonella Esposito et al.

Polymer, 2021, 213, pp.123225. ⟨10.1016/j.polymer.2020.123225⟩

Article dans une revue hal-03331596v1

High-resolution Imaging of Spherulitic Structures in PLLA and PDLA Solvent-cast Films

Manon Guivier , Wen Qian , Joseph Turner , Antonella Esposito

Microscopy and Microanalysis, 2020, 26 (S2), pp.2388-2390. ⟨10.1017/S1431927620021418⟩

Article dans une revue hal-03154636v1
Deposit thumbnail

Synthesis and thermal properties of bio-based copolyesters from the mixtures of 2,5- and 2,4-furandicarboxylic acid with different diols

Shanmugam Thiyagarajan , Michael Meijlink , Aurélie Bourdet , Willem Vogelzang , Rutger Knoop et al.

ACS Sustainable Chemistry & Engineering, 2019, 7, pp.18505-18516. ⟨10.1021/acssuschemeng.9b04463⟩

Article dans une revue hal-02332507v1
Deposit thumbnail

Determination of the equilibrium enthalpy of melting of two-phase semi-crystalline polymers by fast scanning calorimetry

Clément Fosse , Aurélie Bourdet , Esteve Ernault , Antonella Esposito , Nicolas Delpouve et al.

Thermochimica Acta, 2019, 677, pp.67-78. ⟨10.1016/j.tca.2019.03.035⟩

Article dans une revue hal-02154859v1

A structural interpretation of the two components governing the kinetic fragility from the example of interpenetrated polymer networks

Steven Araujo , Florian Batteux , Wenlong Li , Lena Butterfiled , Nicolas Delpouve et al.

Journal of Polymer Science Part B: Polymer Physics, 2018, 56 (20), pp.1393-1403. ⟨10.1002/polb.24722⟩

Article dans une revue hal-02061374v1
Deposit thumbnail

Interfacial Characterization by Pull-Out Test of Bamboo Fibers Embedded in Poly(Lactic Acid)

Quentin Viel , Antonella Esposito , Jean-Marc Saiter , Carlo Santulli , Joseph Turner

Fibers, 2018, 6 (1), pp.7. ⟨10.3390/fib6010007⟩

Article dans une revue hal-02061784v1

Molecular Mobility in Amorphous Biobased Poly(ethylene 2,5-furandicarboxylate) and Poly(ethylene 2,4-furandicarboxylate)

Aurélie Bourdet , Antonella Esposito , Shanmugam Thiyagarajan , Laurent Delbreilh , Frederic Affouard et al.

Macromolecules, 2018, 51 (5), pp.1937-1945. ⟨10.1021/acs.macromol.8b00108⟩

Article dans une revue hal-02061738v1

Local and segmental motions of the mobile amorphous fraction in semi-crystalline polylactide crystallized under quiescent and flow-induced conditions

Xavier Monnier , Laurence Chevalier , Antonella Esposito , Lucia Fernandez-Ballester , Allisson Saiter et al.

Polymer, 2017, 126, pp.141 - 151. ⟨10.1016/j.polymer.2017.08.021⟩

Article dans une revue hal-01766075v1

Fabrication and Characterization of Completely Biodegradable Copolyester-Chitosan Blends: I. Spectroscopic and Thermal Characterization

Shanta Pokhrel , Ralf Lach , Hai Hong Le , André Wutzler , Wolfgang Grellmann et al.

Macromolecular Symposia, 2016, 366 (1), pp.23-34. ⟨10.1002/masy.201650043⟩

Article dans une revue istex hal-01954227v1

From a Three-Phase Model to a Continuous Description of Molecular Mobility in Semicrystalline Poly(Hydroxybutyrate- \emphCo -Hydroxyvalerate)

Antonella Esposito , Nicolas Delpouve , Valerio Causin , Alexandre Dhotel , Laurent Delbreilh et al.

Macromolecules, 2016, 49 (13), pp.4850-4861. ⟨10.1021/acs.macromol.6b00384⟩

Article dans une revue hal-01954226v1

Polystyrene/TiO2 composite electrospun fibers as fillers for poly(butylene succinate-co-adipate): Structure, morphology and properties

Ramesh Neppalli , Valerio Causin , Edmondo Maria Benetti , Suprakas Sinha Ray , Antonella Esposito et al.

European Polymer Journal, 2014, 50, pp.78-86. ⟨10.1016/j.eurpolymj.2013.11.002⟩

Article dans une revue hal-02155318v1

Effect of Mechanical Compression and Hydrostatic Pressure on the Molecular Mobility of Poly(lactic acid)

Emilie Bouthegourd , Antonella Esposito , Allisson Saiter

Macromolecular Symposia, 2014, 341 (1), pp.26-33. ⟨10.1002/masy.201300154⟩

Article dans une revue istex hal-02155238v1

Complex structural rearrangements in As-Se glasses

R. Golovchak , J. Oelgoetz , M. Vlcek , A. Esposito , A. Saiter et al.

The Journal of Chemical Physics, 2014, 140 (5), pp.054505. ⟨10.1063/1.4863561⟩

Article dans une revue hal-02155312v1

Effect of boron nitride as a nucleating agent on the crystallization of bacterial poly(3-hydroxybutyrate)

Jorge Arturo Soto Puente , Antonella Esposito , Frédéric Chivrac , Eric Dargent

Journal of Applied Polymer Science, 2013, 128 (5), pp.2586-2594. ⟨10.1002/app.38182⟩

Article dans une revue istex hal-02155333v1

Is the configurational entropic model able to predict the final equilibrium state reached by Se glasses after very long ageing durations?

J. Grenet , E. Bouthegourd , A. Esposito , A. Saiter , J. Saiter

Philosophical Magazine, 2013, 93 (22), pp.2932-2946. ⟨10.1080/14786435.2013.793482⟩

Article dans une revue hal-02155331v1

Synthetic Polymer Composites Reinforced by Bamboo Fibers

Jean-Marc Saiter , Antonella Esposito , Larisa Dobircau , Joseph Turner , Rameshwar Adhikari

Macromolecular Symposia, 2013, 327 (1), pp.114-120. ⟨10.1002/masy.201350514⟩

Article dans une revue istex hal-02155328v1

Effects of Size and Specific Surface Area of Boron Nitride Particles on the Crystallization of Bacterial Poly(3-hydroxybutyrate- co -3-hydroxyvalerate)

Jorge Arturo Soto Puente , Antonella Esposito , Frédéric Chivrac , Eric Dargent

Macromolecular Symposia, 2013, 328 (1), pp.8-19. ⟨10.1002/masy.201350601⟩

Article dans une revue istex hal-02155322v1

Size of the cooperative rearranging regions vs. fragility in complex glassy systems: Influence of the structure and the molecular interactions

E. Bouthegourd , A. Esposito , D. Lourdin , Allisson Saiter , J.M. M Saiter

Physica B: Condensed Matter, 2013, 425, pp.83-89. ⟨10.1016/j.physb.2013.05.029⟩

Article dans une revue istex hal-02174891v1

Functionalization of Cloisite 30B with fluorescent dyes

A. Esposito , O. Raccurt , J.-Y. Charmeau , J. Duchet-Rumeau

Applied Clay Science, 2010, 50 (4), pp.525-532. ⟨10.1016/j.clay.2010.10.007⟩

Article dans une revue istex hal-02155334v1

Visiovis: monitoring nanofiller dispersion/distribution in molten polymers

Antonella Esposito , Jean Balcaen , Jean-Yves Charmeau , Jannick Duchet-Rumeau

JEC Composites Magazine, 2008, 41, pp.67-71

Article dans une revue hal-00373902v1

Rigid amorphous fraction in different molecular weight polylactic acid after cold crystallization from the glassy state

Yoga Sugama Salim , Antonella Esposito , Loïc Le Pluart , Esteve Ernault , Nicolas Delpouve et al.

Journées GFP Grand Ouest, May 2019, Orléans, France

Communication dans un congrès hal-02295866v1

Effect of Molecular Weights on the Physical Properties and Microstructure of Poly(lactic acid)

Yoga Sugama Salim , Esteve Ernault , Nicolas Delpouve , Benoît Vieille , Laurent Delbreilh et al.

25eme congrès général de la société française de physique, Jul 2019, Nantes, France

Communication dans un congrès hal-02295880v1

Influence de la Fraction Amorphe Rigide sur les Propriétés Mécaniques d'un Composite Carbone/Polysulfure de Phenylène

Esteve Ernault , Nicolas Delpouve , Benoît Vieille , Yoga Sugama Salim , Antonella Esposito et al.

DEPPOS 2018, Sep 2018, La Bresse, France

Communication dans un congrès hal-02294722v1

Order-Disorder Transition Investigated by Temperature Resolved Second Harmonic Generation (TR-SHG)

S. Clevers , Céline Rougeot , M. Sanselme , F. Taulelle , C. Martineau et al.

Journées CNRS Cristech, Oct 2014, Autrans, France

Communication dans un congrès hal-01941131v1

Order-Disorder transitions: investigations in a series of triazole ketones

S. Clevers , Céline Rougeot , M. Sanselme , V. Dupray , F. Taulelle et al.

CGOM-11 (Crystal Growth of Organic Molecules), Jun 2014, Kyoto, Japan

Communication dans un congrès hal-01941027v1

Process for monitoring nanofiller dispersion/distribution in molten polymers

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

Modification, Degradation and Stabilisation of Polymers, MoDeSt 2008, Sep 2008, Liège, Belgium

Communication dans un congrès hal-00381100v1

Process for monitoring nanofiller dispersion/distribution in molten polymers

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

2nd Young Polymer Scientists Conference and 6th Short Course on Nanostructured Polymer Materials: From Chemistry to Applications, Apr 2008, Terni, Italy

Communication dans un congrès hal-00381097v1

Analyse des mécanismes de dispersion de nanocharges dans un polymère fondu. Conséquences sur la morphologie de nanocomposites obtenus par injection

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

15èmes Journées Nationales sur les Composites, JNC15, Jun 2007, Marseille, France. pp.361-368

Communication dans un congrès hal-00377317v1

Analysis of nanofiller dispersion mechanisms in a melt polymer. Consequences on the morphology of nanocomposites obtained by njection moulding

Antonella Esposito , Jannick Duchet-Rumeau , Jean-Yves Charmeau

SAMPE Europe. 28th International Conference and Forums (SEICO 07), Apr 2007, Paris, France

Communication dans un congrès hal-00379970v1

Analysis of nanofiller dispersion mechanisms in a melt polymer. Consequences on the morphology of nanocomposites obtained by injection moulding

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

Journée de sélection des étudiants pour le chapter France SAMPE, Society for the Advancement of Material and Process Engineering, Feb 2007, Saint Etienne, France

Communication dans un congrès hal-00381671v1

Analyse des mécanismes de dispersion de nanocharges dans un polymère fondu. Conséquences sur la morphologie de nanocomposites obtenus par injection

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

35èmes Journées d'Etude des Polymères, JEPO35, Sep 2007, La Colle sur Loup, France

Communication dans un congrès hal-00381676v1

Analyse des mécanismes de dispersion de nanocharges dans un polymère fondu. Conséquences sur la morphologie de nanocomposites obtenus par injection

Antonella Esposito , Jean-Yves Charmeau , Jannick Duchet-Rumeau

16èmes Journées Techniques SAMPE France, Nov 2007, La Seyne-sur Mer, France

Communication dans un congrès hal-00381678v1