cecile langlade

Professeur des Universités - Université de Technologie de Belfort-Monbéliard Directrice Adjointe Laboratoire ICB
49
Documents
Affiliations actuelles
  • Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB)
  • Université de Technologie de Belfort-Montbeliard (UTBM)

Domaines de recherche

Mécanique des matériaux [physics.class-ph] Matériaux

Publications

Publications

Resistance of ceramic / metal Functionally Graded Materials in the flame of a combustion chamber under harsh thermal and environmental conditions

Lisa Audouard , Pierre Bertrand , Jean-Francois Justin , Cécile Langlade , Lucien Vingert et al.

Materials Characterization, 2024, 208, pp.113616. ⟨10.1016/j.matchar.2023.113616⟩

Article dans une revue hal-04661472v1
Deposit thumbnail

Phase stabilisation, thermal expansion and ionic conductivity of high content rare earth oxide (Lu2O3, Y2O3 and Gd2O3) stabilised cubic hafnia

Louise Sévin , Lisa Audouard , Volatiana Razafindramanana , Fabrice Mauvy , Leo Galzin et al.

Journal of the European Ceramic Society, 2023, 43 (9), pp.4153-4166. ⟨10.1016/j.jeurceramsoc.2023.03.006⟩

Article dans une revue hal-04064798v1
Deposit thumbnail

Chemical and microstructural characterisation of HfO2-Y2O3 ceramics with high amount of Y2O3 (33, 40 and 50 mol. %) manufactured using spark plasma sintering

Lisa Audouard , Maria Tsoutsouva , Nicolas Horezan , Etienne Rimpot , Jean-Francois Justin et al.

Journal of the European Ceramic Society, 2022, 43 (5), pp.2093-2103. ⟨10.1016/j.jeurceramsoc.2022.12.061⟩

Article dans une revue hal-03945398v1

Effect of He and N2 gas on the mechanical and tribological assessment of SS316L coating deposited by cold spraying process

Ahlam Belgroune , Akram Alhussein , Linda Aissani , Mourad Zaabat , Aleksei Obrosov et al.

Journal of Materials Science, 2022

Article dans une revue hal-03565134v1
Deposit thumbnail

Turbulences of the supersonic gas flow during cold spraying and their negative effects: A DNS CFD analysis coupled with experimental observation and laser impulse high-speed shadowgraphs of the particles in-flight flow

R.N. Raoelison , L.L Koithara , S. Costil , C. Langlade

International Journal of Heat and Mass Transfer, 2020, 147, pp.118894 -. ⟨10.1016/j.ijheatmasstransfer.2019.118894⟩

Article dans une revue hal-03488440v1

Thermal aspects in friction stir process of AISI 316L: Numerical and experimental investigation

D. Chamoret , N. Lebaal , A. Roman , D. Schlegel , C. Langlade

Mechanics of Advanced Materials and Structures, 2020, 27 (1), pp.74-79. ⟨10.1080/15376494.2018.1472349⟩

Article dans une revue hal-03162598v1

Impact of Selective Laser Melting Additive Manufacturing on the High Temperature Behavior of AISI 316L Austenitic Stainless Steel

Corentin Siri , Alexis Vion , Cécile Langlade , Sébastien Chevalier , Ioana Popa

Oxidation of Metals, 2020, 94 (5-6), pp.527-548. ⟨10.1007/s11085-020-10005-8⟩

Article dans une revue hal-03106130v1

Enhancement of Mechanical Properties and Corrosion Resistance of HVOF-Sprayed NiCrBSi Coatings Through Mechanical Attrition Treatment (SMAT)

Karima Aoudia , Delphine Retraint , C. Verdy , C. Langlade , J. Creus et al.

Journal of Thermal Spray Technology, 2020, 29 (8), pp.2065-2079. ⟨10.1007/s11666-020-01092-9⟩

Article dans une revue hal-03621115v1
Deposit thumbnail

MICRO-SCALE STUDY OF RESIDUAL STRESSES IN CR2O3 COATINGS SPRAYED BY APS

Franck Decroos , Cécile Langlade , Eric Bourillot , Geoffrey Darut , Manuel François

Acta Polytechnica CTU Proceedings, 2020, Proceedings of the 14th International Conference on Local Mechanical Properties - LMP 2019, 27, pp.42-47. ⟨10.14311/APP.2020.27.0042⟩

Article dans une revue hal-03614458v1
Deposit thumbnail

Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)

V. Gillet , E. Aubignat , S. Costil , Bruno Courant , C. Langlade et al.

Surface and Coatings Technology, 2019, 364, pp.306 - 316. ⟨10.1016/j.surfcoat.2019.01.011⟩

Article dans une revue hal-03486727v1

Structural and Mechanical Properties of Arc-Sprayed Ni–Cr Coating Post-Treated by Surface Mechanical Attrition Treatment (SMAT)

Karima Aoudia , Salim Lamri , Sofiane Achache , Delphine Retraint , Christophe Verdy et al.

Coatings, 2018, 8 (12), pp.424. ⟨10.3390/coatings8120424⟩

Article dans une revue hal-02282904v1

Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron

David Tumbajoy Spinel , Xavier Maeder , G Guillonneau , S. Sao-Jao , Sylvie Descartes et al.

Materials & Design, 2018, ⟨10.1016/j.matdes.2018.03.014⟩

Article dans une revue istex hal-01864702v1
Deposit thumbnail

Combination of mechanical and chemical pre-treatments to improve nitriding efficiency on pure iron

Victor Lacaille , Véronique Peres , Cécile Langlade , Constance Morel , Eric Feulvarch et al.

Applied Surface Science, 2017, 414, pp.73-81. ⟨10.1016/j.apsusc.2017.04.084⟩

Article dans une revue hal-01522817v1

Investigation of graded strengthened hyper-deformed surfaces by impact treatment: micro-percussion testing

David Tumbajoy-Spinel , Sylvie Descartes , Jean-Michel Bergheau , Halim Al-Baida , Cécile Langlade et al.

IOP Conference Series: Materials Science and Engineering, 2017, 194, pp.012024. ⟨10.1088/1757-899X/194/1/012024⟩

Article dans une revue hal-02436498v1
Deposit thumbnail

Development of an improved method for identifying material stress-strain curve using repeated micro-impact testing

H. Al Baïda , Guillaume Kermouche , C. Langlade

Mechanics of Materials, 2015, 86, pp.11-20. ⟨10.1016/j.mechmat.2015.02.009⟩

Article dans une revue emse-01499477v1
Deposit thumbnail

Identifying the stress-strain curve of materials by microimpact testing. Application on pure copper, pure iron, and aluminum alloy 6061-T651

Halim Al Baïda , Cécile Langlade , Guillaume Kermouche , R.R. Ambriz

Journal of Materials Research, 2015, 30 (14), pp.2222-2230. ⟨10.1557/jmr.2015.186⟩

Article dans une revue emse-01499521v1
Deposit thumbnail

Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties

Salim Lamri , C. Langlade , Guillaume Kermouche

Materials Science and Engineering: A, 2013, 560, pp.296-305. ⟨10.1016/j.msea.2012.09.070⟩

Article dans une revue emse-01011601v1
Deposit thumbnail

Local identification of the stress-strain curves of metals at a high strain rate using repeated micro-impact testing

Guillaume Kermouche , F. Grange , C. Langlade

Materials Science and Engineering: A, 2013, 569, pp.71-77. ⟨10.1016/j.msea.2013.01.020⟩

Article dans une revue emse-01011578v1

Vers une approche cycle de vie de revêtements métalliques destinés à des applications industrielles

Nicolas Serres , Sophie Costil , Cécile Langlade

Matériaux et Techniques, 2012, 100 (5), pp.387-400. ⟨10.1051/mattech/2011132⟩

Article dans une revue istex hal-04259234v1

Pre-/During-/Post-Laser processes to enhance the adhesion and mechanical properties of thermal sprayed coatings with a reduced environmental impact

D. Garcia-Alonso , Nicolas Serres , C. Demian , Sophie Costil , Cécile Langlade et al.

Journal of Thermal Spray Technology, 2011, 20 (4), pp.719-735. ⟨10.1007/s11666-011-9629-x⟩

Article dans une revue hal-04257192v1

Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray process

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi

Journal of Thermal Spray Technology, 2011, 20, pp.336-343. ⟨10.1007/s11666-010-9565-1⟩

Article dans une revue hal-04257197v1
Deposit thumbnail

Microstructures of Metallic NiCrBSi Coatings Manufactured via Hybrid Plasma Spray and In Situ Laser Remelting Process

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi

Journal of Thermal Spray Technology, 2011, 20 (1-2), pp.336-343

Article dans une revue hal-00677230v1

An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi

Wear, 2011, 270 (9-10), pp.640-649. ⟨10.1016/j.wear.2011.01.025⟩

Article dans une revue istex hal-04257188v1

Corrosion properties of in situ laser remelted NiCrBSi coatings comparison with hard chromium coatings

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi

Journal of Materials Processing Technology, 2011, 211, pp.133-140. ⟨10.1016/j.jmatprotec.2010.09.005⟩

Article dans une revue istex hal-04257179v1

Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi–WC layers manufactured via hybrid plasma/laser process

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi

Applied Surface Science, 2010, 257 (12), pp.5132-5137. ⟨10.1016/j.apsusc.2010.11.062⟩

Article dans une revue istex hal-04257195v1

Influence of substrate biasing on (AI, Ti)N thin films deposited by a hybrid HiPIMS/DC sputtering process

A. Guillaumot , F. Lapostolle , C. Langlade , Alain Billard , J.C. Oliveira et al.

IEEE Transactions on Plasma Science, 2010, 38 (11), pp.3040-3045. ⟨10.1109/TPS.2010.2052931⟩

Article dans une revue hal-00567192v1

Reactive deposition of Al-N coatings in Ar/N2 atmospheres using pulsed-DC or high power impulse magnetron sputtering discharges

A. Guillaumot , F. Lapostolle , Christelle Dublanche-Tixier , J.C. Oliveira , Alain Billard et al.

Vacuum, 2010, 85, pp.120-125. ⟨10.1016/j.vacuum.2010.04.012⟩

Article dans une revue istex hal-00567187v1
Deposit thumbnail

Combined plasma spray and in situ laser melting treatment of NiCrBSi powder

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi et al.

Journal of Optoelectronics and Advanced Materials, 2010, 12 (3), pp.505-510

Article dans une revue hal-00677363v1

Dry coatings and ecodesign: Part. 2 - Tribological performances

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi et al.

Surface and Coatings Technology, 2009, 204 (1-2), pp.197-204. ⟨10.1016/j.surfcoat.2009.07.011⟩

Article dans une revue istex hal-00694037v1

Dry coatings and ecodesign part. 1 - Environmental performances and chemical properties

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Frédérique Machi et al.

Surface and Coatings Technology, 2009, 204 (1-2), pp.187-196. ⟨10.1016/j.surfcoat.2009.07.012⟩

Article dans une revue istex hal-00691012v1

Pulsed laser growth and characterization of thin films on titanium substrates

L. Lavisse , J.M. Jouvard , L. Imhoff , O. Heintz , J. Korntheuer et al.

Applied Surface Science, 2007, 253 (19), pp.8226-8230. ⟨10.1016/j.apsusc.2007.02.136⟩

Article dans une revue istex hal-04841014v1
Deposit thumbnail

Wear damage resulting from sliding impact kinematics in pressurized high temperature water: energetical and statistical approaches

Anne-Laure Kaiser , Sandrine Bec , Jean-Philippe Vernot , Cécile Langlade

Journal of Physics D: Applied Physics, 2006, 39, pp.3193-3199. ⟨10.1088/0022-3727/39/15/S09⟩

Article dans une revue istex hal-00109545v1

Stabilité thermochimique de phases céramiques réfractaires cubiques à base d’hafnie en présence de tungstène

Guillaume Pernette , Louise Sévin , Jean-François Justin , Pierre Bertrand , Cécile Langlade et al.

Journées annuelles 2025 du GFC, Groupe Français de Céramique (GFC), Mar 2025, Orléans, France

Communication dans un congrès hal-05005000v1

Hafnia-based materials for aerospace applications

Aurélie Julian-Jankowiak , Lisa Audouard , Louise Sévin , Jean-François Justin , Cécile Langlade et al.

18th Conference of the European Ceramic Society - ECerS XVIII, European Ceramic Society; Groupe Français de la Céramique, Jul 2023, Lyon, France

Communication dans un congrès hal-04727474v1
Deposit thumbnail

Functionally Graded Materials designed for thrusters : resistance under laser thermal flux and in combustion environment

Lisa Audouard , Aurélie Julian-Jankowiak , Jean-François Justin , Pierre Bertrand , Cécile Langlade et al.

EUCASS-CEAS 2023, EUCASS AISBL, Jul 2023, Lausanne, Switzerland. ⟨10.13009/EUCASS2023-295⟩

Communication dans un congrès hal-04266602v1
Deposit thumbnail

Manufacturing and characterisations of hafnia-based materials for aerospace applications

Aurélie Julian-Jankowiak , Louise Sévin , Volatiana Razafindramanana , Lisa Audouard , Jean-François Justin et al.

9ᵀᴴ EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS-3AF 2022, Jun 2022, Lille, France. ⟨10.13009/EUCASS2022-6082⟩

Communication dans un congrès hal-03773731v1
Deposit thumbnail

Experimental and Numerical aspects of B416 Cu-Be alloy friction stir process

Nadhir Lebaal , Dominique Chamoret , Adriana Roman , Daniel Schlegel , Eric Gete et al.

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France

Communication dans un congrès hal-03465282v1

Effect of surface mechanical attrition treatment (SMAT) on the structure and mechanical behavior of HVOF sprayed NiCrBSi coatings

Karima Aoudia , Salim Lamri , S. Azem , Delphine Retraint , C. Verdy et al.

The 31st International Conference on Surface Modification Technologies (SMT31), Jul 2017, Mons, Belgium

Communication dans un congrès hal-02870945v1
Deposit thumbnail

Identification locale de loi de comportement à haute vitesse de déformation par micro-impact répété

Fabien Grange , Guillaume Kermouche , Cécile Langlade , Philippe Gilles

CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03422623v1

Life cycle assessment of thick coating processes

Nicolas Serres , Sophie Costil , Cécile Langlade , C. Coddet

International Thermal Spray 2011 (2011-09-27 to 2011-09-29 : Hamburg, Germany), Sep 2011, Hamburg, Germany. pp.1424-1429

Communication dans un congrès hal-04257181v1
Deposit thumbnail

Etude de l'influence de la dureté et de la microstructure du substrat sur le mécanisme d'endommagement par cloquage des dépôts PVD sous impact répété

Salim Lamri , Cécile Langlade , Guillaume Kermouche

CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France

Communication dans un congrès hal-03422606v1
Deposit thumbnail

Performances tribologiques de revêtements éco-conçus

Nicolas Serres , Françoise Hlawka , Sophie Costil , Cécile Langlade , Alain Cornet

CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France

Communication dans un congrès hal-03391350v1

AlN thin films deposition : a comparison between HIPIMS and conventional dcMS sputtering

A. Guillaumot , Christelle Dublanche-Tixier , J.C. Oliveira , F. Lapostolle , A. Cavaleiro et al.

Eleventh International Conference on Plasma Surface Engineering, PSE 2008, Sep 2008, Garmisch-Partenkirchen, Germany

Communication dans un congrès hal-00366949v1

Influence of substrates bias on the properties of (Al, Ti)N thin films sputter-deposited using a hybrid HIPIMS/dcMS process

A. Guillaumot , B. Borcea , Christelle Dublanche-Tixier , J.C. Oliveira , F. Lapostolle et al.

Eleventh International Conference on Plasma Surface Engineering, PSE 2008, Sep 2008, Garmisch-Partenkirchen, Germany

Communication dans un congrès hal-00366944v1
Deposit thumbnail

Caractérisations structurales et tribologiques de couches d'oxydes de titane créées par faisceau Laser

Gianni-Paolo Pillon , C. Marco de Lucas , C. Langlade , Luc Lavisse

CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France

Communication dans un congrès hal-03361792v1

Pulsed laser growth and characterization of thin films on titanium substrates (Poster)

L. Lavisse , J.-M. Jouvard , C. Langlade , L. Imhoff , O. Heintz et al.

E-MRS IUMRS ICEM 2006, 2006, Nice, France, May 28-June 02, 2006, France

Communication dans un congrès hal-00080240v1