Accéder directement au contenu

Cédric SAMUEL

Associate Professor, IMT Nord Europe, Centre For Materials and Processes
38%
Libre accès
39
Documents
Affiliations actuelles
  • 1076755
Identifiants chercheurs
Contact

Présentation

Docteur Ingénieur HDR - Physique, Chimie et Transformation des Matériaux Polymères

Publications

Porous LiFePO4/PVDF composites for large scale redox targeting flow battery

Théo Lotenberg , Cédric Samuel , Dominique Larcher , Julien Bossu , Guillaume Potier
Journal of Power Sources, 2024, 602, pp.234290. ⟨10.1016/j.jpowsour.2024.234290⟩
Article dans une revue hal-04506522v1

Energy harvesting by uniaxially-stretched poly(lactide) films at low tensile strain frequencies for powering wearable sensors: experimental results and theoretical extrapolation

Mohamed Aymen Ben Achour , Sophie Barrau , Jean-François Tahon , Mohamed Rguiti , Christian Courtois
Smart Materials and Structures, 2023, Smart Materials and Structures, ⟨10.1088/1361-665x/acd972⟩
Article dans une revue hal-04130906v1
Image document

Shear Piezoelectricity of Poly(L-lactide) Films Manufactured by Extrusion–Orientation: An Insight on Process–Structure–Property Relationships

Mohamed Aymen Ben Achour , Sophie Barrau , Jean-François Tahon , Mohamed Rguiti , Christian Courtois
ACS Applied Polymer Materials, 2023, 5 (12), pp.9761 - 9775. ⟨10.1021/acsapm.3c01419⟩
Article dans une revue hal-04323414v1

Poly(aniline)-based Ammonia Sensors: Understanding the Role of Polyurethane on Structural/Morphological Properties and Sensing Performances

Edilene da Silva , Cédric Samuel , Leonardo Furini , Carlos José L. Constantino , Nathalie Redon
Sensors and Actuators B: Chemical, 2023, pp.134664. ⟨10.1016/j.snb.2023.134664⟩
Article dans une revue hal-04221313v1

Evaluation of shear piezoelectric coefficients by a bimorph cantilever technique for extruded and oriented poly( l ‐lactide) films

Mohamed Aymen Ben Achour , Cédric Samuel , Mohamed Rguiti , Sophie Barrau , Christian Courtois
Polymers for Advanced Technologies, 2022, Polymers for Advanced Technologies, 34 (3), pp.939-947. ⟨10.1002/pat.5942⟩
Article dans une revue hal-03891299v1

Rheological Considerations in Processing Self-Reinforced Thermoplastic Polymer Nanocomposites: A Review

Mohamed Yousfi , Cédric Samuel , Jérémie Soulestin , Marie-France Lacrampe
Polymers, 2022, 14 (3), pp.637. ⟨10.3390/polym14030637⟩
Article dans une revue hal-03850823v1

(Nano)Fibrillar morphology development in biobased poly(butylene succinate‐co‐adipate )/poly(amide‐11) blown films

Tarek Dadouche , Mohamed Yousfi , Cédric Samuel , Marie-France Lacrampe , Jérémie Soulestin
Polymer Engineering and Science, 2021, ⟨10.1002/pen.25645⟩
Article dans une revue hal-03183425v1
Image document

Solvent-Free Design of Biobased Non-isocyanate Polyurethanes with Ferroelectric Properties

Valentina Sessini , Cuong Nguyen Thai , Harvey Amorín , Ricardo Jiménez , Cédric Samuel
ACS Sustainable Chemistry & Engineering, 2021, 9 (44), pp.14946-14958. ⟨10.1021/acssuschemeng.1c05380⟩
Article dans une revue hal-03418893v1
Image document

Piezoelectric and Electromechanical Characteristics of Porous Poly(Ethylene-co-Vinyl Acetate) Copolymer Films for Smart Sensors and Mechanical Energy Harvesting Applications

Chouaib Ennawaoui , Abdelowahed Hajjaji , Cédric Samuel , Erroumayssae Sabani , Abdelkader Rjafallah
Applied System Innovation, 2021, 4 (3), pp.57. ⟨10.3390/asi4030057⟩
Article dans une revue hal-03703173v1

Role of Compatibilizer in Improving the Properties of PLA/PA12 Blends

A. Raj , C. Samuel , K. Prashantha
Frontiers in Materials, 2020, 7, ⟨10.3389/fmats.2020.00193⟩
Article dans une revue hal-03224948v1

Poly(ethylene oxide)/Poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) (PEDOT:PSS) Blends: An Efficient Route to Highly Conductive Thermoplastic Materials for Melt-State Extrusion Processing ?

Caroline Duc , Grégory Stoclet , Jeremie Soulestin , Cédric Samuel
ACS Applied Polymer Materials, 2020, 2 (6), pp.2366-2379. ⟨10.1021/acsapm.0c00303⟩
Article dans une revue hal-02566991v1

Compatibility in biobased poly(L-lactide)/polyamide binary blends: From melt-state interfacial tensions to (thermo)mechanical properties

A. Raj , K. Prashantha , C. Samuel
Journal of Applied Polymer Science, 2020, 137 (10), ⟨10.1002/app.48440⟩
Article dans une revue hal-03224996v1

Enhanced (thermo)mechanical properties in biobased poly(l-lactide)/poly(amide-12) blends using high shear extrusion processing without compatibilizers

A. Raj , C. Samuel , N. Malladi , K. Prashantha
Polymer Engineering and Science, 2020, 60 (8), pp.1902-1916. ⟨10.1002/pen.25426⟩
Article dans une revue hal-03224933v1
Image document

Beta Phase Crystallization and Ferro- and Piezoelectric Performances of Melt-Processed Poly(vinylidene difluoride) Blends with Poly(methyl methacrylate) Copolymers Containing Ionizable Moieties

Alexandre de Neef , Cédric Samuel , Harvey Amorín , Gregory Stoclet , Ricardo Jiménez
ACS Applied Polymer Materials, 2020, ACS Applied Polymer Materials, 2 (9), pp.3766-3780. ⟨10.1021/acsapm.0c00351⟩
Article dans une revue hal-03183441v1
Image document

Melt compatibility between polyolefins: Evaluation and reliability of interfacial/surface tensions obtained by various techniques

Cédric Samuel , Thibault Parpaite , Marie-France Lacrampe , Jérémie Soulestin , Olivier Lhost
Polymer Testing, 2019, 78, pp.105995. ⟨10.1016/j.polymertesting.2019.105995⟩
Article dans une revue hal-03183432v1

Dielectric and mechanical optimization properties of porous poly(ethylene-co-vinyl acetate) copolymer films for pseudo-piezoelectric effect

C. Ennawaoui , Houda Lifi , A. Hajjaji , C. Samuel , Mohamed Rguiti
Polymer Engineering and Science, 2019, 59 (7), pp.1455-1461. ⟨10.1002/pen.25132⟩
Article dans une revue hal-03314893v1

Peculiar effect of stereocomplexes on the photochemical ageing of PLA/PMMA blends

Géraldine Rapp , Cédric Samuel , Jérémy Odent , Jean-Marie Raquez , Philippe Dubois
Polymer Degradation and Stability, 2018, 150, pp.92-104
Article dans une revue hal-01963065v1

Processing of PVDF-based electroactive/ferroelectric films: importance of PMMA and cooling rate from the melt state on the crystallization of PVDF beta-crystals

Alexandre de Neef , Cédric Samuel , Grégory Stoclet , Mohamed Rguiti , Christian Courtois
Soft Matter, 2018, 14 (22), pp.4591-4602. ⟨10.1039/c8sm00268a⟩
Article dans une revue hal-02624887v1

Development of nanofibrillar morphologies in poly( l -lactide)/poly(amide) blends: role of the matrix elasticity and identification of the critical shear rate for the nodular/fibrillar transition

Mohammed Yousfi , Tarek Dadouche , Dimitri Chomat , Cédric Samuel , J. Soulestin
RSC Advances, 2018, 8 (39), pp.22023 - 22041. ⟨10.1039/C8RA03339K⟩
Article dans une revue hal-01821246v1

Design of biobased poly(butylene succinate) foams by single-screw extrusion: Identification of relevant rheological parameters controlling foam morphologies

C. Duborper , C. Samuel , A.C. Akue-Asseko , C. Loux , M.-F. Lacrampe
Polymer Engineering and Science, 2018, 58 (4), pp.503 - 512. ⟨10.1002/pen.24733⟩
Article dans une revue hal-01773193v1

Role of isosorbide comonomer on interfacial tension with subsequent mophologies & mechanical properties of biobased poly(L-lactide)/poly(ethylene-co-isosorbide terephtalate) blends

Amani Bouzouita , Cédric Samuel , Thibault Parpaite , Marie France Lacrampe , Marion Collinet
Abstracts of Papers of the American Chemical Society, 2018, 255
Article dans une revue hal-03190797v1

Shape-Memory Behavior of Polylactide/Silica Ionic Hybrids

J. Odent , J.-M. Raquez , C. Samuel , S. Barrau , A. Enotiadis
Macromolecules, 2017, 50 (7), pp.2896-2905. ⟨10.1021/acs.macromol.7b00195⟩
Article dans une revue hal-03322392v1

Mousses polymères électroactives

Patricia Krawczak , Marie-France Lacrampe , Jeremie Soulestin , Cédric Samuel
Plastiques et Caoutchouc Magazine, 2016, 934, pp.64-67
Article dans une revue hal-01780771v1
Image document

Design of highly tough poly(L-lactide)-based ternary blends for automotive applications

Amani Bouzouita , Cédric Samuel , Delphine Notta-Cuvier , Jérémy Odent , Franck Lauro
Journal of Applied Polymer Science, 2016, 133 (19), ⟨10.1002/app.43402⟩
Article dans une revue hal-03446635v1

Highly Efficient Metal-Free Organic Catalysts to Design New Environmentally Friendly Starch-Based Blends

Cédric Samuel , Yvan Chalamet , Fernande Boisson , Jean-Charles Majesté , Frédéric Becquart
Journal of Polymer Science Part A: Polymer Chemistry, 2014, 52 (4), pp.493-503. ⟨10.1002/pola.27022⟩
Article dans une revue hal-00983583v1
Image document

Modeling the reactive PA6 flow for LCM processes

William Han , Quentin Govignon , Arthur Cantarel , Cédric Samuel , Fabrice Schmidt
ESAFORM 2021 - 24th International Conference on Material Forming, Apr 2021, En ligne, Belgium. ⟨10.25518/esaform21.4351⟩
Communication dans un congrès hal-03202647v1

Piezoelectric and Electromechanical properties of biobased poly(L-lactide) stretched films for energy harvesting applications

Christian Courtois , Mohamed Rguiti , Mohamed Aymen Ben Achour , Sophie Barrau , Birgit Stubbe
Journée des Jeunes Polyméristes du Nord, JPN04, Jun 2019, Villeneuve d'Ascq, France
Communication dans un congrès hal-02277984v1
Image document

PEDOT:PSS/PEO: a melt-processable blend for flexible conductive electrodes?

Caroline Duc , Jérémie Soulestin , Cédric Samuel
Advanced Nano Materials 2019, Jul 2019, Aveiro, Portugal
Communication dans un congrès hal-04249500v1

Role of Isosorbide Comonomer on Interfacial Tension with Subsequent Mophologies & Mechanical Properties of Biobased Poly(L-Lactide)/Poly(Ethylene-co-Isosorbide Terephtalate) Blends

A Bouzouita , Cédric Samuel , T Parpaite , M-F Lacrampe , Marion Collinet
255th ACS National Meeting and Exposition, Mar 2018, New Orléans, United States
Communication dans un congrès hal-04289430v1

Systèmes polymères multiphasés : Des polymères de commodité vers les polymères de performance, par le contrôle des propriétés interfaciales et des procédés de mise en œuvre et mise en forme

Jeremie Soulestin , Marie-France Lacrampe , Kalappa Prashantha , Patricia Krawczak , Cédric Samuel
Colloque "Matériaux: Réalités et Nouvelles Frontières", Institut Mines-Télécom, Mar 2016, Paris, France
Communication dans un congrès hal-01790380v1
Image document

Influence of rheological characteristics on the morphology of chemically-foamed biobased polymers by single-screw extrusion

Clément Duborper , Cédric Samuel , Cyril Loux , Marie-France Lacrampe , Patricia Krawczak
7th International Conference on Polymers and Moulds Innovations (PMI-2016), Sep 2016, Ghent, Belgium. pp.21-23
Communication dans un congrès hal-01782324v1

Development of toughened PLLA/PMMA bio-based materials for automotive applications

Amani Bouzouita , Cédric Samuel , Delphine Notta-Cuvier , Jérémy Odent , Franck Lauro
Eurofillers Polymer Blends 2015, Apr 2015, Montpellier, France
Communication dans un congrès hal-03434182v1

PLA/PMMA - based blends toughened with commercial impact modifiers for automotive applications

Amani Bouzouita , Jean-Marie Raquez , Franck Lauro , Cédric Samuel , Delphine Notta-Cuvier
Belgian polymer group annual meeting, May 2014, Gand, Belgium
Communication dans un congrès hal-03475097v1

PLA/PMMA - based blends toughened with commercial impact modifiers for automotive applications

Amani Bouzouita , Jean-Marie Raquez , Franck Lauro , Cédric Samuel , Delphine Notta-Cuvier
5th workshop of green chemistry and nanotechnologies in polymer chemistry, Jul 2014, San Sebastian, Spain
Communication dans un congrès hal-03436327v1