Charles-André Gandin

128
Documents

Présentation

<1999 Ecole Polytechnique Fédérale de Lausanne (EPFL) / Laboratoire de Métallurgie Physique (LMPH)

1999-08/2004 Ecole Nationale Supérieure des Mines de Nancy (ENSMN) / Laboratoire de Sciences et Génie des Matériaux et de Métallurgie (LSG2M)

09/2004- MINES ParisTech / Centre de Mise en Forme des Matériaux (CEMEF)

Publications

45
20
13
8
8
8
7
6
6
5
5
5
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
30
17
9
8
5
4
3
3
3
3
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
2
7
1
7
7
6
5
5
6
9
6
1
2
5
5
4
2
3
4
3
4
6
5
1
2
4
5
2
2
36
28
19
11
10
10
9
6
6
6
6
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
89
25
15
1

Publications

Deposit thumbnail

Thermo-mechanical simulation of L-PBF process at part-scale by coupling grain structure calculation and crystal viscoplasticity

Trung-Chien Vo , Zixuan Li , Michel Bellet , Charles-André Gandin , Yancheng Zhang

Computer Methods in Applied Mechanics and Engineering, 2026, 448, pp.118429. ⟨10.1016/j.cma.2025.118429⟩

Article dans une revue hal-05342162v1
Deposit thumbnail

Metallurgically-driven thermomechanical analysis of multiple side-to-side laser melting on a 316L substrate

Zixuan Li , Michel Bellet , Charles-André Gandin , Manas Vijay Upadhyay , Yancheng Zhang

Additive Manufacturing, 2025, 112, pp.104991. ⟨10.1016/j.addma.2025.104991⟩

Article dans une revue hal-05326559v1

Multiphysics simulation and microstructure prediction of coaxial wire-laser additive manufacturing process

Zichen Kong , Gildas Guillemot , Michel Bellet , Charles-André Gandin

Materialia, 2025, 42, pp.102461. ⟨10.1016/j.mtla.2025.102461⟩

Article dans une revue hal-05236504v1
Deposit thumbnail

Homogenization Methods for Thermal Study of Support Structure in Laser Powder Bed Fusion (L-PBF) -Application to Process Numerical Modeling

Yancheng Zhang , Hugo Behlal , Charles-André Gandin , Oriane Senninger , Gildas Guillemot et al.

International Journal of Numerical Methods for Heat and Fluid Flow, 2024, ⟨10.1108/HFF-09-2024-0683⟩

Article dans une revue hal-04785786v1
Deposit thumbnail

Structures in grain-refined directionally solidified hypoeutectic Al-Cu alloys: Benchmark experiments under microgravity on-board the International Space Station

G. Zimmermann , L. Sturz , C. Pickmann , E. Schaberger-Zimmermann , A. Roosz et al.

Materialia, 2024, 36, pp.102171. ⟨10.1016/j.mtla.2024.102171⟩

Article dans une revue hal-04655530v1

Part-Scale Thermomechanical and Grain Structure Modeling for Additive Manufacturing: Status and Perspectives

Yancheng Zhang , Gildas Guillemot , Théophile Camus , Oriane Senninger , Michel Bellet et al.

Metals, 2024, 14 (10), pp.1173. ⟨10.3390/met14101173⟩

Article dans une revue hal-04784793v1
Deposit thumbnail

Kinetic effects during the plane-front and dendritic solidification of multicomponent alloys

Paul Martin , Gildas Guillemot , Christopher Hareland , Peter Voorhees , Charles-André Gandin

Acta Materialia, 2024, 263 (1-2), pp.119473. ⟨10.1016/j.actamat.2023.119473⟩

Article dans une revue hal-04304525v1
Deposit thumbnail

Electromagnetic levitation containerless processing of metallic materials in microgravity: rapid solidification

D. Matson , L. Battezzati , P. Galenko , Ch.-A. Gandin , A. Gangopadhyay et al.

NPJ Microgravity, 2023, 9 (1), pp.65. ⟨10.1038/s41526-023-00310-2⟩

Article dans une revue hal-04304500v1
Deposit thumbnail

Simulation of dendritic grain structures with Cellular Automaton–Parabolic Thick Needle model

Y. Wu , O. Senninger , Ch.-A. Gandin

Computational Materials Science, 2023, 229, pp.112360. ⟨10.1016/j.commatsci.2023.112360⟩

Article dans une revue hal-04304494v1
Deposit thumbnail

Three-dimensional modeling of solidification grain structures generated by laser powder bed fusion

Th. Camus , Daniel Maisonnette , Oriane Baulin , Oriane Senninger , Gildas Guillemot et al.

Materialia, 2022, 30, pp.101804. ⟨10.1016/j.mtla.2023.101804⟩

Article dans une revue hal-03838366v1
Deposit thumbnail

Structure and texture simulations in fusion welding processes – comparison with experimental data

Chengdan Xue , Nicolas Blanc , Fabien Soulié , Cyril Bordreuil , Frédéric Deschaux-Beaume et al.

Materialia, 2022, pp.101305. ⟨10.1016/j.mtla.2021.101305⟩

Article dans une revue hal-03519180v1
Deposit thumbnail

The thermodynamics of non-equilibrium interfaces during phase transformations in concentrated multicomponent alloys

Christopher Hareland , Gildas Guillemot , Charles-André Gandin , Peter Voorhees

Acta Materialia, 2022, 241, pp.118407. ⟨10.1016/j.actamat.2022.118407⟩

Article dans une revue hal-03838044v1
Deposit thumbnail

Hybrid Cellular Automaton - Parabolic Thick Needle model for equiaxed dendritic solidification

Romain Fleurisson , Oriane Senninger , Gildas Guillemot , Charles-André Gandin

Journal of Materials Science and Technology, 2022, 124, pp.26-40. ⟨10.1016/j.jmst.2022.02.017⟩

Article dans une revue hal-03838035v1
Deposit thumbnail

Finite Element Modeling of Powder Bed Fusion at Part Scale by a Super-Layer Deposition Method Based on Level Set and Mesh Adaptation

Yancheng Zhang , Charles-André Gandin , Michel Bellet

Journal of Manufacturing Science and Engineering, 2022, 144(5): 051001, ⟨10.1115/1.4052386⟩

Article dans une revue hal-03448797v1
Deposit thumbnail

Thermodynamic coupling in the computation of dendrite growth kinetics for multicomponent alloys

Gildas Guillemot , Oriane Senninger , Christopher Hareland , Peter Voorhees , Charles-André Gandin

Calphad, 2022, 77, pp.102429. ⟨10.1016/j.calphad.2022.102429⟩

Article dans une revue hal-03838017v1
Deposit thumbnail

Growth competition between columnar dendritic grains - The role of microstructural length scales

Elaheh Dorari , Kaihua Ji , Gildas Guillemot , Charles-André Gandin , Alain Karma

Acta Materialia, 2022, 223, pp.117395. ⟨10.1016/j.actamat.2021.117395⟩

Article dans une revue hal-03448660v1
Deposit thumbnail

A Partitioned Solution Algorithm for Concurrent Computation of Stress–Strain and Fluid Flow in Continuous Casting Process

Shaojie Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet

Metallurgical and Materials Transactions B, 2021, 52 (2), pp.978 - 995. ⟨10.1007/s11663-021-02070-4⟩

Article dans une revue hal-03193304v1
Deposit thumbnail

3D cellular automaton modelling of silicon crystallization including grains in twin relationship

Adrian Pineau , Gildas Guillemot , G. Reinhart , G. Regula , N. Mangelinck-Noel et al.

IOP Conference Series: Materials Science and Engineering, 2020, 861, pp.012052. ⟨10.1088/1757-899x/861/1/012052⟩

Article dans une revue hal-03094570v1
Deposit thumbnail

Three-dimensional cellular automaton modeling of silicon crystallization with grains in twin relationships

Adrian Pineau , Gildas Guillemot , Guillaume Reinhart , Gabrielle Regula , Nathalie Mangelinck-Noël et al.

Acta Materialia, 2020, 191, pp.230-244. ⟨10.1016/j.actamat.2020.03.051⟩

Article dans une revue hal-02910269v1

Concurrent and coupled resolution of fluid flow and solid deformation in solidification processes

S Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet

IOP Conference Series: Materials Science and Engineering, 2020, 861, pp.012068. ⟨10.1088/1757-899X/861/1/012068⟩

Article dans une revue hal-03154341v1
Deposit thumbnail

Impact of solute flow during directional solidification of a Ni-based alloy: In-situ and real-time X-radiography

G. Reinhart , D. Grange , L. Abou-Khalil , N. Mangelinck-Noel , N. T. Niane et al.

Acta Materialia, 2020, 194, pp.68-79. ⟨10.1016/j.actamat.2020.04.003⟩

Article dans une revue hal-02804321v1
Deposit thumbnail

Morphological stability of spherical particles - Extension of the Mullins-Sekerka criteria to multi-component alloys under a non-stationary diffusive regime

Gildas Guillemot , Charles-André Gandin

Acta Materialia, 2020, 205, pp.116539. ⟨10.1016/j.actamat.2020.116539⟩

Article dans une revue hal-03448799v1
Deposit thumbnail

Concurrent and coupled resolution of fluid flow and solid deformation in solidification processes

Shaojie Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet

IOP Conference Series: Materials Science and Engineering, 2020, 861, pp.012068. ⟨10.1088/1757-899X/861/1/012068⟩

Article dans une revue hal-03093053v1
Deposit thumbnail

On the analytical and numerical simulation of an oscillating drop in zero-gravity

A. Aalilija , Ch.-A. Gandin , Elie Hachem

Computers and Fluids, 2020, 197, pp.104362. ⟨10.1016/j.compfluid.2019.104362⟩

Article dans une revue hal-02428686v1

Analysis of columnar-to-equiaxed transition experiment in lab scale steel casting by a multiphase model

S. Sachi , M. Zaloznik , H. Combeau , Charles-André Gandin , M. Gennesson et al.

IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012039. ⟨10.1088/1757-899X/529/1/012039⟩

Article dans une revue hal-02377811v1

A partitioned solution algorithm for fluid flow and stress-strain computations applied to continuous casting

Shaojie Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet

IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012082. ⟨10.1088/1757-899X/529/1/012082⟩

Article dans une revue hal-02377807v1

Dendrite growth in undercooled Al-rich Al-Ni melts measured on Earth and in Space

D. Herlach , S. Burggraf , M. Reinartz , P. Galenko , M. Rettenmayr et al.

Physical Review Materials, 2019, 3 (7), ⟨10.1103/PhysRevMaterials.3.073402⟩

Article dans une revue hal-02377805v1

Level-set modelling of Laser Beam Melting process applied onto ceramic materials – Comparison with experimental results

Qiang Cheng , L. Moniz da Silva Sancho , Gildas Guillemot , Charles-André Gandin , M. Bellet et al.

IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012002. ⟨10.1088/1757-899X/529/1/012002⟩

Article dans une revue hal-02377810v1
Deposit thumbnail

A partitioned two-step solution algorithm for concurrent fluid flow and stress–strain numerical simulation in solidification processes

Shaojie Zhang , Gildas Guillemot , Charles-André Gandin , Michel Bellet

Computer Methods in Applied Mechanics and Engineering, 2019, 356, pp.294-324. ⟨10.1016/j.cma.2019.07.006⟩

Article dans une revue hal-02377794v1
Deposit thumbnail

Additive manufacturing of an oxide ceramic by laser beam melting—Comparison between finite element simulation and experimental results

Liliana Moniz , Qiang Chen , Gildas Guillemot , Michel Bellet , Charles-André Gandin et al.

Journal of Materials Processing Technology, 2019, 270, pp.106-117. ⟨10.1016/j.jmatprotec.2019.02.004⟩

Article dans une revue hal-02055743v1

Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5)

Charles-André Gandin

IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.011001. ⟨10.1088/1757-899X/529/1/011001⟩

Article dans une revue hal-02377806v1

Growth competition between columnar dendritic grains – Cellular automaton versus phase field modeling

Adrian Pineau , Gildas Guillemot , Damien Tourret , Alain Karma , Charles-André Gandin

Acta Materialia, 2018, 155, pp.286-301. ⟨10.1016/j.actamat.2018.05.032⟩

Article dans une revue hal-02377817v1

Modeling of eutectic growth kinetics with thermodynamic couplings

Oriane Senninger , Charles-André Gandin , Gildas Guillemot

Acta Materialia, 2018, 161, pp.110-126. ⟨10.1016/j.actamat.2018.08.056⟩

Article dans une revue hal-02377814v1

Competitive grain growth during directional solidification of a polycrystalline binary alloy: Three-dimensional large-scale phase-field study

Tomohiro Takaki , Shinji Sakane , Munekazu Ohno , Yasushi Shibuta , Takayuki Aoki et al.

Materialia, 2018, 1, pp.104-113. ⟨10.1016/j.mtla.2018.05.002⟩

Article dans une revue hal-02377816v1
Deposit thumbnail

Numerical modelling of fluid and solid thermomechanics in additive manufacturing by powder-bed fusion: Continuum and level set formulation applied to track- and part-scale simulations

Yancheng Zhang , Qiang Chen , Gildas Guillemot , Charles-André Gandin , Michel Bellet

Comptes Rendus. Mécanique, 2018, 346 (11), pp.1055 - 1071. ⟨10.1016/j.crme.2018.08.008⟩

Article dans une revue hal-01892655v1
Deposit thumbnail

Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains

Thi-Thuy-My Nguyen , Charles-André Gandin , Hervé Combeau , Miha Založnik , Michel Bellet

Metallurgical and Materials Transactions A, 2018, 49 (5), pp.1725-1748. ⟨10.1007/s11661-018-4496-4⟩

Article dans une revue hal-01723412v1
Deposit thumbnail

Numerical modelling of the impact of energy distribution and Marangoni surface tension on track shape in selective laser melting of ceramic material

Qiang Chen , Gildas Guillemot , Charles-André Gandin , Michel Bellet

Additive Manufacturing, 2018, 21, pp.713 - 723. ⟨10.1016/j.addma.2018.03.003⟩

Article dans une revue hal-01809287v1
Deposit thumbnail

Three-dimensional finite element thermomechanical modeling of additive manufacturing by selective laser melting for ceramic materials

Qiang Chen , Gildas Guillemot , Charles-André Gandin , Michel Bellet

Additive Manufacturing, 2017, 16, pp.124 - 137. ⟨10.1016/j.addma.2017.02.005⟩

Article dans une revue hal-01552410v1
Deposit thumbnail

An analytical model with interaction between species for growth and dissolution of precipitates

Gildas Guillemot , Charles-André Gandin

Acta Materialia, 2017, 134, pp.375 - 393. ⟨10.1016/j.actamat.2017.04.035⟩

Article dans une revue hal-01552398v1
Deposit thumbnail

Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project

Gerhard Zimmermann , Laszlo Sturz , Henri Nguyen-Thi , Nathalie Mangelinck-Noël , Y. Z. Li et al.

JOM Journal of the Minerals, Metals and Materials Society, 2017, 69 (8), pp.1269-1279. ⟨10.1007/s11837-017-2397-4⟩

Article dans une revue hal-01543661v1
Deposit thumbnail

Solidification of Undercooled Melts of Al-Based Alloys on Earth and in Space

Dieter M. Herlach , Stefan Burggraf , Peter Galenko , Charles-André Gandin , Asuncion Garcia-Escorial et al.

JOM Journal of the Minerals, Metals and Materials Society, 2017, 69 (8), pp.1303-1310. ⟨10.1007/s11837-017-2402-y⟩

Article dans une revue hal-01555700v1
Deposit thumbnail

Experimental study and two-phase numerical modeling of macrosegregation induced by solid deformation during punch pressing of solidifying steel ingots

Takao Koshikawa , Michel Bellet , Charles-André Gandin , Hideaki Yamamura , Manuel Bobadilla

Acta Materialia, 2017, 124, pp.513 - 527. ⟨10.1016/j.actamat.2016.11.023⟩

Article dans une revue hal-01414250v1

Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes

Shijia Chen , Gildas Guillemot , Charles-André Gandin

Acta Materialia, 2016, 115, pp.448-467. ⟨10.1016/j.actamat.2016.05.011⟩

Article dans une revue hal-01354148v1

Quantification of Primary Dendritic and Secondary Eutectic Nucleation Undercoolings in Rapidly Solidified Hypo-Eutectic Al-Cu Droplets

Abdoul-Aziz Bogno , Pooya Delshad Khatibi , Hani Henein , Charles-André Gandin

Metallurgical and Materials Transactions A, 2016, 47 (9), pp.4606-4615. ⟨10.1007/s11661-016-3594-4⟩

Article dans une revue hal-01369940v1

Modeling of GP(I) zone formation during quench in an industrial AA7449 75mm thick plate

Patrick Schloth , Alexis Deschamps , Charles-André Gandin , Jean Marie Drezet

Materials & Design, 2016, 112, pp.46 - 57. ⟨10.1016/j.matdes.2016.09.052⟩

Article dans une revue hal-01410400v1
Deposit thumbnail

Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation

Takao Koshikawa , Michel Bellet , Charles-André Gandin , Hideaki Yamamura , Manuel Bobadilla

Metallurgical and Materials Transactions A, 2016, 47 (8), pp.4053-4067. ⟨10.1007/s11661-016-3564-x⟩

Article dans une revue hal-01354150v1

Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy

Luc Rougier , Alain Jacot , Charles-André Gandin , Damien Ponsen , Virginie Jaquet

Metallurgical and Materials Transactions A, 2016, 47 (11), pp.5557-5568. ⟨10.1007/s11661-016-3694-1⟩

Article dans une revue hal-01368836v1

Analytical model for equiaxed globular solidification in multicomponent alloys

Gildas Guillemot , Charles-André Gandin

Acta Materialia, 2015, 97, pp.419-434. ⟨10.1016/j.actamat.2015.04.030⟩

Article dans une revue hal-01181256v1
Deposit thumbnail

Evolution of the dendritic morphology with the solidification velocity in rapidly solidified Al- 4.5wt.%Cu droplets

Marie Bedel , Guillaume Reinhart , Charles-André Gandin , Abdoul-Aziz Bogno , H Nguyen-Thi et al.

IOP Conference Series: Materials Science and Engineering, 2015, 84 (012016), ⟨10.1088/1757-899X/84/1/012016⟩

Article dans une revue hal-01232185v1

Simulation of directional solidification of refined Al–7wt.%Si alloys – Comparison with benchmark microgravity experiments

Dong Rong Liu , Nathalie Mangelinck-Noël , Charles-André Gandin , Gerhard Zimmermann , Laszlo Sturz et al.

Acta Materialia, 2015, 93, pp.24-37. ⟨10.1016/j.actamat.2015.03.058⟩

Article dans une revue hal-01159047v1
Deposit thumbnail

Simulation of Channel Segregation During Directional Solidification of In—75 wt pct Ga. Qualitative Comparison with In Situ Observations

Ali Saad , Charles-André Gandin , Michel Bellet , Natalia Shevchenko , Sven Eckert

Metallurgical and Materials Transactions A, 2015, Symposium ICASP-4 International Conference on Advanced Solidification Processing, 46 (11), pp.4886-4897. ⟨10.1007/s11661-015-2963-8⟩

Article dans une revue hal-01159073v1
Deposit thumbnail

Temperature-based energy solver coupled with tabulated thermodynamic properties – Application to the prediction of macrosegregation in multicomponent alloys

Ali Saad , Charles-André Gandin , Michel Bellet

Computational Materials Science, 2015, 99, pp.221-231. ⟨10.1016/j.commatsci.2014.12.009⟩

Article dans une revue hal-01111022v1

Characterization of dendrite morphologies in rapidly solidified Al–4.5wt.%Cu droplets

Marie Bedel , Guillaume Reinhart , Abdoul-Aziz Bogno , Charles-André Gandin , Suzanne Jacomet et al.

Acta Materialia, 2015, 89, pp.234-246. ⟨10.1016/j.actamat.2015.02.007⟩

Article dans une revue istex hal-01130102v1

CRISTAPRESS: An optical cell for structure development in high-pressure crystallization

Séverine A.E. Boyer , F.E.J. Fournier , Charles-André Gandin , Jean-Marc Haudin

Review of Scientific Instruments, 2014, 85 (1), pp.Article 013906. ⟨10.1063/1.4862473⟩

Article dans une revue hal-00960121v1
Deposit thumbnail

3D Coupled Cellular Automaton (CA)-Finite Element (FE) Modeling for Solidification Grain Structures in Gas Tungsten Arc Welding (GTAW)

Shijia Chen , Gildas Guillemot , Charles-André Gandin

ISIJ international, 2014, 54 (2 - Special Issue on Cutting Edge of Computer Simulation of Solidification, Casting and Refining), pp.401-407. ⟨10.2355/isijinternational.54.401⟩

Article dans une revue hal-00974737v1
Deposit thumbnail

Coupled Cellular Automaton (CA) - Finite Element (FE) Modeling of Directional Solidification of Al-3.5 wt% Ni Alloy: A Comparison with X-ray Synchrotron Observations

Dong Rong Liu , Guillaume Reinhart , Nathalie Mangelinck-Noël , Charles-André Gandin , Henri Nguyen-Thi et al.

ISIJ international, 2014, 54 (2 - Special Issue on Cutting Edge of Computer Simulation of Solidification, Casting and Refining), pp.392-400. ⟨10.2355/isijinternational.54.392⟩

Article dans une revue hal-00974728v1

Optimized parallel computing for cellular automaton-finite element modeling of solidification grain structures

Tommy Carozzani , Charles-André Gandin , Hugues Digonnet

Modelling and Simulation in Materials Science and Engineering, 2014, 22 (1), pp.Article number 015012. ⟨10.1088/0965-0393/22/1/015012⟩

Article dans une revue hal-00933162v1

Spinodal Decomposition Mechanism of γ′ Precipitation in a Single Crystal Ni-Based Superalloy

X.P. Tan , Dominique Mangelinck , Carine Perrin-Pellegrino , Luc Rougier , Charles-André Gandin et al.

Metallurgical and Materials Transactions A, 2014, 45 (11), pp.4725-4730. ⟨10.1007/s11661-014-2506-8⟩

Article dans une revue hal-01058164v1
Deposit thumbnail

Computation of Phase Transformation Paths in Steels by a Combination of the Partial- and Para-equilibrium Thermodynamic Approximations

Takao Koshikawa , Charles-André Gandin , Michel Bellet , Hideaki Yamamura , Manuel Bobadilla

ISIJ international, 2014, 54 (6), pp.1274-1282. ⟨10.2355/isijinternational.54.1274⟩

Article dans une revue hal-01025814v1

Atom probe tomography of secondary γ′ precipitation in a single crystal Ni-based superalloy after isothermal aging at 1100 °c

X.P. Tan , Dominique Mangelinck , C. Perrin-Pellegrino , Luc Rougier , Charles-André Gandin et al.

Journal of Alloys and Compounds, 2014, 611, pp.389-394. ⟨10.1016/j.jallcom.2014.05.132⟩

Article dans une revue hal-01022688v1

Structures in directionally solidified Al-7 wt.% Si alloys: Benchmark experiments under microgravity

Dong Rong Liu , Nathalie Mangelinck-Noël , Charles-André Gandin , Gerhard Zimmermann , Laszlo Sturz et al.

Acta Materialia, 2014, 64, pp.253-265. ⟨10.1016/j.actamat.2013.10.038⟩

Article dans une revue istex hal-00912444v1
Deposit thumbnail

Columnar-to-equiaxed transition in solidification processing of ALSi7 alloys in microgravity-the CETSOL project

Gerhard Zimmermann , Laszlo Sturz , Bernard Billia , Nathalie Mangelinck-Noël , Dong Rong Liu et al.

Materials Science Forum, 2014, 790-791, pp.12-21. ⟨10.4028/www.scientific.net/MSF.790-791.12⟩

Article dans une revue hal-01024435v1

Direct Modeling of Structures and Segregations Up to Industrial Casting Scales

Charles-André Gandin , Tommy Carozzani , Hugues Digonnet , Shijia Chen , Gildas Guillemot

JOM Journal of the Minerals, Metals and Materials Society, 2013, 65 (9), pp.1122-1130. ⟨10.1007/s11837-013-0679-z⟩

Article dans une revue hal-00850850v1

Phase selection and microstructure formation in undercooled Co-61.8 at.% Si melts under various containerless processing conditions

Yong K Zhang , Jianrong Gao , Matthias Kolbe , S. Klein , Chunzheng Yang et al.

Acta Materialia, 2013, 61 (13), pp.4861-4873. ⟨10.1016/j.actamat.2013.04.061⟩

Article dans une revue istex hal-00834066v1

Numerical simulation of precipitation in multicomponent Ni-base alloys

Luc Rougier , Alain Jacot , Charles-André Gandin , Paolo Di Napoli , Pierre-Yvan Théry et al.

Acta Materialia, 2013, 61 (17), pp.6396-6405. ⟨10.1016/j.actamat.2013.07.018⟩

Article dans une revue hal-00856688v1

Influence of natural convection during upward directional solidification: A comparison between in situ X-ray radiography and direct simulation of the grain structure

Guillaume Reinhart , Charles-André Gandin , Nathalie Mangelinck-Noël , Henri Nguyen-Thi , José Eduardo Spinelli et al.

Acta Materialia, 2013, 61 (13), pp.4765-4777. ⟨10.1016/j.actamat.2013.04.067⟩

Article dans une revue istex hal-00831547v1

Prediction of carbide precipitation using partial equilibrium approximation in Fe-C-V-W-Cr-Mo high speed steels

Hongwei Zhang , Keiji Nakajima , Charles-André Gandin , Jicheng Hi

ISIJ international, 2013, 53, pp.493-501. ⟨10.2355/isijinternational.53.493⟩

Article dans une revue hal-00820964v1
Deposit thumbnail

Direct Simulation of a Solidification Benchmark Experiment

Tommy Carozzani , Charles-André Gandin , Hugues Digonnet , Michel Bellet , Kader Zaidat et al.

Metallurgical and Materials Transactions A, 2013, 44 (2), pp.873-887. ⟨10.1007/s11661-012-1465-1⟩

Article dans une revue hal-00747567v1

3D CAFE modeling of grain structures: Application to primary dendritic and secondary eutectic solidification

Tommy Carozzani , Hugues Digonnet , Charles-André Gandin

Modelling and Simulation in Materials Science and Engineering, 2012, 20 (1), Article number 015010 - 19 p. ⟨10.1088/0965-0393/20/1/015010⟩

Article dans une revue hal-00657733v1

Gas atomization of Al-Ni powders: Solidification modeling and neutron diffraction analysis

Damien Tourret , Guillaume Reinhart , Charles-André Gandin , G. N. Iles , Ulf Dahlborg et al.

Acta Materialia, 2011, 59 (17), pp.6658-6669. ⟨10.1016/j.actamat.2011.07.023⟩

Article dans une revue istex hal-00617424v1

Multiple non-equilibrium phase transformations: Modeling versus electro-magnetic levitation experiment

Damien Tourret , Charles-André Gandin , Thomas Volkmann , Dieter M. Herlach

Acta Materialia, 2011, 59 (11), pp.4665-4677. ⟨10.1016/j.actamat.2011.04.013⟩

Article dans une revue istex hal-00595250v1
Deposit thumbnail

Prediction of Solidification Paths for Fe-C-Cr Alloys by a Multiphase Segregation Model Coupled to Thermodynamic Equilibrium Calculations

Hongwei Zhang , Charles-André Gandin , Haithem Ben Hamouda , Keiji Nakajima , Jicheng He

ISIJ international, 2010, 50 (12 - Special Issue on Cutting Edge of Computer Simulation of Solidification and Casting), pp.Pages 1859-1866. ⟨10.2355/isijinternational.50.1859⟩

Article dans une revue hal-00570414v1

Corrigendum to "Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys" [Int. J. Thermal Sci. 48 (11) (2009) 2013-2016]

Michel Bellet , H. Combeau , Y. Fautrelle , D. Gobin , M. Rady et al.

International Journal of Thermal Sciences, 2010, 49 (7), pp.1318-1318. ⟨10.1016/j.ijthermalsci.2010.01.001⟩

Article dans une revue istex hal-00528029v1

Droplet Solidification of Impulse Atomized Al-0.61Fe and Al-1.9Fe

Hani Henein , Vincent Buchoud , Ralf-Roman R.R. Schmidt , Chuck Watt , Dmitri Malakov et al.

Canadian Metallurgical Quarterly, 2010, 49 (3), pp.Pages 275-292

Article dans une revue hal-00526266v1
Deposit thumbnail

Experimental and Numerical Modeling of Segregation in Metallic Alloys

Salem Mosbah , Michel Bellet , Charles-André Gandin

Metallurgical and Materials Transactions A, 2010, 41 (3), pp.651-669. ⟨10.1007/s11661-009-0141-6⟩

Article dans une revue hal-00509607v1

Modeling of solidification: Grain structures and segregations in metallic alloys./ Modélisation de la solidification : Structures de grains et ségrégations des alliages métalliques

Charles-André Gandin

Comptes Rendus. Physique, 2010, 11 (3-4), pp.Pages 216-225. ⟨10.1016/j.crhy.2010.07.010⟩

Article dans une revue istex hal-00523966v1

Numerical modelling of columnar to equiaxed transition - application to microgravity experiments

A. Noeppel , O. Budenkova , G. Zimmermann , L. Sturz , N. Mangelinck-Noel et al.

International Journal of Cast Metals Research, The, 2009, 22 (1-4), pp.Pages 34-38. ⟨10.1179/136404609x367272⟩

Article dans une revue hal-00445234v1

A comparison of columnar-to-equiaxed transition prediction methods using simulation of the growing columnar front

Shaun Mcfadden , David J. Browne , Charles-André Gandin

Metallurgical and Materials Transactions A, 2009, 40 (3), pp.Pages 662-672. ⟨10.1007/s11661-008-9708-x⟩

Article dans une revue istex hal-00509473v1

A generalized segregation model for concurrent dendritic, peritectic and eutectic solidification

Damien Tourret , Charles-André Gandin

Acta Materialia, 2009, 57 (7), pp.Pages 2066-2079. ⟨10.1016/j.actamat.2009.01.002⟩

Article dans une revue istex hal-00509262v1

Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys

Michel Bellet , H. Combeau , Y. Fautrelle , D. Gobin , M. Rady et al.

International Journal of Thermal Sciences, 2009, 48 (11), pp.2013-2016. ⟨10.1016/j.ijthermalsci.2009.07.024⟩

Article dans une revue istex hal-00433162v1

A Solidification Model for Atomization

Arvind Prasad , Salem Mosbah , Hani Henein , Charles-André Gandin

ISIJ international, 2009, 49 (7), pp.Pages 992-999. ⟨10.2355/isijinternational.49.992⟩

Article dans une revue hal-00509615v1

Non-equilibrium and near-equilibrium solidification of undercooled melts of Ni- and Al-based alloys

Dieter M. Herlach , Raman Lengsdorf , Peter Galenko , Helena Hartmann , Charles-André Gandin et al.

Advanced Engineering Materials, 2008, 10 (5), pp.Pages 444-452. ⟨10.1002/adem.200800022⟩

Article dans une revue istex hal-00509627v1
Deposit thumbnail

The Effect of Eutectic Undercooling on Microsegregation of Rapidly Solidified Al-Cu Droplets

Arvind Prasad , Hani Henein , Charles-André Gandin

Journal Of The Japanese Society Of Microgravity Applications, 2008, Proceedings of Third International Symposium on Physical Science in Space 2008, 25 (3), pp.449-452

Article dans une revue hal-01570949v1
Deposit thumbnail

Materials solidification physics in space

Lorenz Ratke , Charles-André Gandin , Ragnvald H. Mathiesen , Michel Rappaz , Stephan Rex

Europhysics News, 2008, 39 (5), pp.Pages 22-24. ⟨10.1051/epn:2008502⟩

Article dans une revue hal-00831331v1

Experimental and numerical modeling of equiaxed solidification in metallic alloys

Charles-André Gandin , Salem Mosbah , Thomas Volkmann , Dieter M. Herlach

Acta Materialia, 2008, 56 (13), pp.Pages 3023-3035. ⟨10.1016/j.actamat.2008.02.041⟩

Article dans une revue istex hal-00509620v1

Interaction between single grain solidification and macro segregation: Application of a cellular automaton - Finite element model

Gildas Guillemot , Charles-André Gandin , Michel Bellet

Journal of Crystal Growth, 2007, 303 (1), pp.58-68. ⟨10.1016/j.jcrysgro.2006.12.076⟩

Article dans une revue istex hal-00509633v1

Modeling of precipitate-free zone formed upon homogenization in a multi-component alloy

Charles-André Gandin , Alain Jacot

Acta Materialia, 2007, 55 (7), pp.Pages 2539-2553. ⟨10.1016/j.actamat.2006.11.047⟩

Article dans une revue istex hal-00509642v1

Atomized droplet solidification as an equiaxed growth model

Romulo Heringer , Charles-André Gandin , Gérard Lesoult , Hani Henein

Acta Materialia, 2006, 54 (17), pp.Pages 4427-4440. ⟨10.1016/j.actamat.2006.05.015⟩

Article dans une revue istex hal-00512752v1

Modeling of macrosegregation and solidification grain structures with a coupled Cellular Automaton-Finite Element model

Gildas Guillemot , Charles-André Gandin , Hervé Combeau

ISIJ international, 2006, 46 (6), pp.Pages 880-895. ⟨10.2355/isijinternational.46.880⟩

Article dans une revue hal-00514059v1

Understanding the rapid solidification of Al-4.3Cu and Al-17Cu using X-ray tomography

A. Prasad , H. Henein , Eric Maire , Charles-André Gandin

Metallurgical and Materials Transactions A, 2006, pp.249-257

Article dans une revue hal-00436216v1

Experimental and modeling studies of the thermal conditions and magnesium, iron, and copper content on the morphology of the aluminum silicon eutectic in hypoeutectic aluminum silicon alloys

Gustav Heiberg , Charles-André Gandin , Harald Görner , Lars Arnberg

Metallurgical and Materials Transactions A, 2004, 35 (9), pp.2981 - 2991. ⟨10.1007/s11661-004-0245-y⟩

Article dans une revue istex hal-01570931v1

X-ray tomography study of atomized al-cu droplets

Arvind Prasad , Hani Henein , Eric Maire , Charles-André Gandin

Canadian Metallurgical Quarterly, 2004, 43 (2), pp.273 - 282. ⟨10.1179/cmq.2004.43.2.273⟩

Article dans une revue hal-01538267v1

Evolution of primary precipitates in a AA3003 alloy during isothermal holdings

Moukrane Dehmas , Pierre Archambault , Mickael Serriere , Elisabeth Aeby-Gautier , Charles-André Gandin

Aluminium -Dusseldorf then Isernhagen-, 2004, 80, pp.619-623

Article dans une revue hal-01570938v1

A new cellular automaton—finite element coupling scheme for alloy solidification

Gildas Guillemot , Charles-André Gandin , Hervé Combeau , Romulo Heringer

Modelling and Simulation in Materials Science and Engineering, 2004, ⟨10.1088/0965-0393/12/3/013⟩

Article dans une revue hal-01435623v1

Segregation during solidification with spongy deformation of the mushy zone

Gérard Lesoult , Charles-André Gandin , Ngadia Taha Niane

Acta Materialia, 2003, 51 (18), pp.5263 - 5283. ⟨10.1016/S1359-6454(03)00379-3⟩

Article dans une revue istex hal-01570897v1

Boundary layer correlation for dendrite tip growth with fluid flow

Charles-André Gandin , Gildas Guillemot , Benoît Appolaire , Ngadia Taha Niane

Materials Science and Engineering: A, 2003, ⟨10.1016/S0921-5093(02)00261-7⟩

Article dans une revue istex hal-01435720v1

A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification

Marcelo Aquino Martorano , Christoph Beckermann , Charles-André Gandin

Metallurgical and Materials Transactions A, 2003, 34 (8), pp.1657 - 1674. ⟨10.1007/s11661-003-0311-x⟩

Article dans une revue istex hal-01570591v1

Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys

Charles-André Gandin , Yves Brechet , Michel Rappaz , Gilles Canova , Michael Ashby et al.

Acta Materialia, 2002, 50 (5), pp.901 - 927. ⟨10.1016/S1359-6454(01)00376-7⟩

Article dans une revue hal-01564424v1

Modeling of Precipitation Coupled with Thermodynamic Calculations

Mickael Serriere , Charles-André Gandin , Elisabeth Gautier , Pierre Archambault , Moukrane Dehmas

Materials Science Forum, 2002, Aluminium Alloys 2002 - ICAA8, 396-402 (2), pp.747 - 752. ⟨10.4028/www.scientific.net/MSF.396-402.747⟩

Article dans une revue hal-01564423v1
Deposit thumbnail

Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys

Charles-André Gandin , Yves Brechet , Michel Rappaz , Gilles Canova , Michael Ashby et al.

La Metallurgia Italiana, 2002, 3, pp.37-38

Article dans une revue hal-01570149v1

In-situ precipitation in the Al-Mn-Fe-Si alloy during homogeneisation treatment

Moukrane Dehmas , Pierre Archambault , Mickael Serriere , Elisabeth Aeby-Gautier , Charles-André Gandin

Aluminium -Dusseldorf then Isernhagen-, 2002, 78 (10), pp.864-869

Article dans une revue hal-01570590v1

Stochastic modelling of dendritic grain structures

Charles-André Gandin

Revue de Métallurgie, 2001, 98 (12), pp.1073 - 1077. ⟨10.1051/metal:2001148⟩

Article dans une revue istex hal-01570573v1

Stochastic Modeling of Dendritic Grain Structures

Charles-André Gandin Article dans une revue hal-01570940v1

Stochastic modelling of dendritic grain structures

Charles-André Gandin

La Metallurgia Italiana, 2001, 93 (7-8), pp.68-69

Article dans une revue hal-01564428v1

Stochastic modelling of dendritic grain structures

Charles-André Gandin

Revue de Métallurgie, 2001, 98 (12), pp.1073-1077. ⟨10.1051/metal:2001148⟩

Article dans une revue istex hal-01564426v1

Stochastic Modeling of Dendritic Grain Structures

Charles-André Gandin

Advanced Engineering Materials, 2001, 3 (5), pp.303 - 306. ⟨10.1002/1527-2648(200105)3:5<303::AID-ADEM303>3.0.CO;2-J⟩

Article dans une revue istex hal-01564430v1

Stochastic modelling of dendritic grain structures

Charles-André Gandin

Materials Science and Technology, 2001, 17 (7), pp.786-789

Article dans une revue hal-01564427v1

From constrained to unconstrained growth during directional solidification

Charles-André Gandin

Acta Materialia, 2000, 48 (10), pp.2483 - 2501. ⟨10.1016/S1359-6454(00)00070-7⟩

Article dans une revue istex hal-01564433v1

Process modelling of grain selection during the solidification of single crystal superalloy castings

P. Carter , D.C. Cox , Charles-André Gandin , Roger C. Reed

Materials Science and Engineering: A, 2000, 280 (2), pp.233 - 246. ⟨10.1016/S0921-5093(99)00701-7⟩

Article dans une revue istex hal-01564432v1
Deposit thumbnail

Experimental Study of the Transition from Constrained to Unconstrained Growth during Directional Solidification.

Charles-André Gandin

ISIJ international, 2000, 40 (10), pp.971 - 979. ⟨10.2355/isijinternational.40.971⟩

Article dans une revue hal-01564434v1

Modelling of Solidification Microstructures

Michel Rappaz , Jean-Luc Desbiolles , Charles-André Gandin , Alain Sémoroz , S Henry et al.

Materials Science Forum, 2000, 329-330, pp.389 - 396. ⟨10.4028/www.scientific.net/MSF.329-330.389⟩

Article dans une revue hal-01564431v1

EBSD characterisation and modelling of columnar dendritic grains growing in the presence of fluid flow

H. Takatani , Charles-André Gandin , Michel Rappaz

Acta Materialia, 2000, 48 (3), pp.675 - 688. ⟨10.1016/S1359-6454(99)00413-9⟩

Article dans une revue istex hal-01564435v1

A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures

Charles-André Gandin , Jean-Luc Desbiolles , Michel Rappaz , Philippe Thévoz

Metallurgical and Materials Transactions A, 1999, 30 (12), pp.3153 - 3165. ⟨10.1007/s11661-999-0226-2⟩

Article dans une revue istex hal-01564436v1
Deposit thumbnail

Prediction of a process window for the investment casting of dendritic single crystals

Arnaud de Bussac , Charles-André Gandin

Materials Science and Engineering: A, 1997, 237 (1), pp.35-42. ⟨10.1016/S0921-5093(97)00081-6⟩

Article dans une revue istex hal-01564437v1

A 3D Cellular Automaton algorithm for the prediction of dendritic grain growth

Charles-André Gandin , Michel Rappaz

Acta Materialia, 1997, 45 (5), pp.2187 - 2195. ⟨10.1016/S1359-6454(96)00303-5⟩

Article dans une revue istex hal-01564438v1

Analytical and numerical predictions of dendritic grain envelopes

Charles-André Gandin , R.J. Schaefer , Michel Rappaz

Acta Materialia, 1996, 44 (8), pp.3339 - 3347. ⟨10.1016/1359-6454(95)00433-5⟩

Article dans une revue istex hal-01564440v1

Orientation dependence of primary dendrite spacing

Charles-André Gandin , M. Eshelman , Rohit Trivedi

Metallurgical and Materials Transactions A, 1996, 27 (9), pp.2727 - 2739. ⟨10.1007/BF02652367⟩

Article dans une revue istex hal-01564441v1

Prediction of grain structures in various solidification processes

Michel Rappaz , Charles-André Gandin , Jean-Luc Desbiolles , Philippe Thévoz

Metallurgical and Materials Transactions A, 1996, 27 (3), pp.695 - 705. ⟨10.1007/BF02648956⟩

Article dans une revue istex hal-01564439v1

Modelling of As-Cast Structures

Michel Rappaz , X. Doré , Charles-André Gandin , A. Jacot , T. Jalanti

Materials Science Forum, 1996, Aluminium Alloys - ICAA5, 217-222 (Part 1), pp.7 - 18. ⟨10.4028/www.scientific.net/MSF.217-222.7⟩

Article dans une revue hal-01564442v1

Modeling of microstructure formation

Michel Rappaz , Charles-André Gandin , A. Jacot , Ch. Charbon

Modeling of Casting, Welding and Advanced Solidification Processes, 1995, Proceedings of the 1995 7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes; London, UK; ; 10 September 1995 through 15 September 199, pp.501-516

Article dans une revue hal-01564445v1

Process Modelling and Microstructure

Michel Rappaz , Charles-André Gandin

Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1995, 351 (1697), pp.563 - 577. ⟨10.1098/rsta.1995.0053⟩

Article dans une revue istex hal-01564443v1

Grain texture evolution during the columnar growth of dendritic alloys

Charles-André Gandin , Michel Rappaz , D. West , B. L. Adams

Metallurgical and Materials Transactions A, 1995, 26 (6), pp.1543 - 1551. ⟨10.1007/BF02647605⟩

Article dans une revue istex hal-01564447v1
Deposit thumbnail

Stochastic Modelling of Solidification Grain Structures.

Charles-André Gandin , Ch. Charbon , Michel Rappaz

ISIJ international, 1995, 35 (6), pp.651-657. ⟨10.2355/isijinternational.35.651⟩

Article dans une revue hal-01564444v1

Application of inverse methods to the estimation of boundary conditions and properties

Michel Rappaz , Jean-Luc Desbiolles , Jean Marie Drezet , Charles-André Gandin , A. Jacot et al.

Modeling of Casting, Welding and Advanced Solidification Processes, 1995, Proceedings of the 1995 7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes; London, UK; ; 10 September 1995 through 15 September 199, pp.449-457

Article dans une revue hal-01564446v1

A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes

Charles-André Gandin , Michel Rappaz

Acta Metallurgica et Materialia, 1994, 42 (7), pp.2233 - 2246. ⟨10.1016/0956-7151(94)90302-6⟩

Article dans une revue istex hal-01564448v1

3-Dimensional simulation of the grain formation in investment castings

Charles-André Gandin , Michel Rappaz , Rémy Tintillier

Metallurgical and Materials Transactions A, 1994, 25 (3), pp.629 - 635. ⟨10.1007/BF02651604⟩

Article dans une revue istex hal-01564449v1

Probabilistic modelling of microstructure formation in solidification processes

Michel Rappaz , Charles-André Gandin

Acta Metallurgica et Materialia, 1993, 41 (2), pp.345 - 360. ⟨10.1016/0956-7151(93)90065-Z⟩

Article dans une revue istex hal-01564451v1

Three-dimensional probabilistic simulation of solidification grain structures: Application to superalloy precision castings

Charles-André Gandin , Michel Rappaz , Rémy Tintillier

Metallurgical Transactions A, 1993, 24 (2), pp.467 - 479. ⟨10.1007/BF02657334⟩

Article dans une revue istex hal-01564450v1