Charles Manière

102
Documents

Publications

Publications

Deposit thumbnail

Ultrafast Printing and Sintering: Breaking Manufacturing Speed Barrier

Flavie Lebas , Sylvain Marinel , Charles Manière

Advanced Materials Technologies, 2026, ⟨10.1002/admt.202501937⟩

Article dans une revue hal-05470449v1
Deposit thumbnail

Exploration of UHS scalability by SPS approach: Multiphysics simulation, critical dimensions, mechanisms and properties

Flavie Lebas , Levent Karacasulu , Mattia Biesuz , Jérôme Lecourt , Christelle Bilot et al.

Journal of the European Ceramic Society, 2026, 46 (3), pp.117865. ⟨10.1016/j.jeurceramsoc.2025.117865⟩

Article dans une revue hal-05308338v1
Deposit thumbnail

A gradient descent method for inverse learning of a sintering model with specific physical parameter denormalization

Charles Manière

Journal of the European Ceramic Society, 2026, 46 (8), pp.118158. ⟨10.1016/j.jeurceramsoc.2026.118158⟩

Article dans une revue hal-05470432v1
Deposit thumbnail

A comparative study of CMC and HPMC binders for direct ink writing of ceramics

Flavie Lebas , Frédérine Marie , Sylvain Marinel , Charles Manière

Journal of the American Ceramic Society, 2026, 109 (2), pp.e70565. ⟨10.1111/jace.70565⟩

Article dans une revue hal-05510310v1
Deposit thumbnail

Formulation of direct ink writing suspensions from coarse and reused B4C powders with ultra-high-temperature pressureless SPS

Flavie Lebas , Alice Barrioulet , Ghislain Josse , Sylvain Marinel , Charles Manière

Additive Manufacturing, 2026, 115, pp.105071. ⟨10.1016/j.addma.2025.105071⟩

Article dans une revue hal-05446812v1
Deposit thumbnail

Optimization of direct ink writing of Si₃N₄ suspensions for the fabrication of self-supported structure

Flavie Lebas , Sylvain Marinel , Elisa Jaumouillé , Christelle Bilot , Romuald Herbinet et al.

Progress in Additive Manufacturing, 2025, ⟨10.1007/s40964-025-01212-3⟩

Article dans une revue hal-05131444v1
Deposit thumbnail

Pneumatic dispensing of aqueous Al₂O₃ suspensions via material extrusion additive manufacturing

Flavie Lebas , Sylvain Marinel , Christelle Bilot , Romuald Herbinet , Loïc Le Pluart et al.

Next Materials, 2025, 8, pp.100750. ⟨10.1016/j.nxmate.2025.100750⟩

Article dans une revue hal-05131410v1
Deposit thumbnail

Finite Element Prediction of Sintering Deformation in 3D-Printed Porcelain Filament

Fatima Hammoud , Charles Manière

Journal of Materials Research and Technology, 2025, ⟨10.1016/j.jmrt.2025.11.239⟩

Article dans une revue hal-05388051v1
Deposit thumbnail

Pressureless sintering of 3D printed SiC filaments at 2200 °C: impact of coarsening, debinding atmosphere, residual carbon and anisotropy

Fatima Hammoud , Jérôme Lecourt , Christelle Bilot , Charles Manière

Progress in Additive Manufacturing, 2025, 2025, ⟨10.1007/s40964-025-01230-1⟩

Article dans une revue hal-05156043v1
Deposit thumbnail

Sintering under high hating rates

Levent Karacasulu , Charles Manière , Cekdar Vakifahmetoglu , Sylvain Marinel , Mattia Biesuz

Annual Review of Materials Research, 2025, 55 (1), pp.203-230. ⟨10.1146/annurev-matsci-080323-042441⟩

Article dans une revue hal-05140930v1
Deposit thumbnail

Modeling the sintering trajectory of ZnO by cold sintering process

Nicolas Albar , Charles Manière , Thomas Hérisson de Beauvoir , Emeric Sanchez , Geoffroy Chevallier et al.

Acta Materialia, 2025, 290, pp.120974. ⟨10.1016/J.ACTAMAT.2025.120974⟩

Article dans une revue hal-05015110v1
Deposit thumbnail

A new sinter-forging process based on a 915 MHz solidstate microwave source for sintering of oxides ceramics

Guillaume Rayrat , Alexis Onfroy , Christelle Bilot , Frédéric Bernard , Sébastien Lemonnier et al.

Journal of the European Ceramic Society, 2025, 45 (7), pp.117262. ⟨10.1016/j.jeurceramsoc.2025.117262⟩

Article dans une revue hal-05131575v1
Deposit thumbnail

Ultrafast high-temperature sintering of yttria-stabilized zirconia in reactive N2 atmosphere

Levent Karacasulu , Thomas Hérisson de Beauvoir , Emanuele de Bona , Michele Cassetta , Cekdar Vakifahmetoglu et al.

Journal of the European Ceramic Society, 2025, 45 (2), pp.116879. ⟨10.1016/J.JEURCERAMSOC.2024.116879⟩

Article dans une revue hal-04703445v1
Deposit thumbnail

Modeling anisotropic sintering for fused deposition modeling of alumina

Fatima Hammoud , Jérôme Lecourt , Christelle Bilot , Charles Manière

International Journal of Advanced Manufacturing Technology, 2025, 137 (5-6), pp.2319-2334. ⟨10.1007/s00170-025-15306-3⟩

Article dans une revue hal-05130081v1
Deposit thumbnail

Debinding and sintering optimization of stereolithography based silicon nitride parts for attaining centimetric wall-thickness shapes

Théotim Marie , Zehui Du , Chee Lip Gan , Sylvain Marinel , Vijay Shankar Sridharan et al.

Journal of the European Ceramic Society, 2025, 45 (2), pp.116911. ⟨10.1016/j.jeurceramsoc.2024.116911⟩

Article dans une revue hal-04738296v1
Deposit thumbnail

ZrB2 Gear Fabrication by Spark Plasma Sintering Coupled to Interface 3D Printing

Charles Manière , Claude Estournès

Ceramics, 2025, 8 (3), pp.81. ⟨10.3390/ceramics8030081⟩

Article dans une revue hal-05140971v1
Deposit thumbnail

Versatile aqueous alumina suspensions formulations by one step ball milling for robocasting from fine to coarse powders

Flavie Lebas , Sylvain Marinel , Christelle Bilot , Romuald Herbinet , Loïc Le Pluart et al.

Materials Today Chemistry, 2025, 45, pp.102647. ⟨10.1016/j.mtchem.2025.102647⟩

Article dans une revue hal-05131426v1
Deposit thumbnail

A continuum approach to simulating the sintering of 3D-printed objects with natural anisotropic honeycomb lattice structures

Charles Manière , Theotim Marie , Aymeric Jugan , Loïc Le Pluart , Sylvain Marinel

Journal of the European Ceramic Society, 2025, 45 (10), pp.117334. ⟨10.1016/j.jeurceramsoc.2025.117334⟩

Article dans une revue hal-05130086v1
Deposit thumbnail

Elaboration of Printable Nanopowder Zirconia Suspensions for Vat Photopolymerization

Aymeric Jugan , Sylvain Marinel , Loïc Le Pluart , Théotim Marie , Romuald Herbinet et al.

Journal of Materials Engineering and Performance, In press, ⟨10.1007/s11665-025-11338-8⟩

Article dans une revue hal-05131528v1
Deposit thumbnail

Sacrificial ceramics powders mix for titanium alloys complex shapes production by hybridization of SPS and 3D printing

Joseph Le Cloarec , Sylvain Marinel , Claude Estournès , Cendrine Folton , Moukrane Dehmas et al.

Powder Technology, 2024, 448, pp.120324. ⟨10.1016/j.powtec.2024.120324⟩

Article dans une revue hal-04738249v1
Deposit thumbnail

A robust thermomechanical sintering simulation for 3D printed parts with internal lattices

Charles Manière , Joseph Sambasene Diatta , Thomas Grippi , Christelle Bilot , Guillaume Riquet et al.

Acta Materialia, 2024, pp.120024. ⟨10.1016/j.actamat.2024.120024⟩

Article dans une revue hal-04586943v1
Deposit thumbnail

Stereolithography coupled with spark plasma sintering to produce Ti-6Al-4V complex shapes

Joseph Le Cloarec , Sylvain Marinel , Claude Estournès , Moukrane Dehmas , Cendrine Folton et al.

Journal of Manufacturing Processes, 2024, 114, pp.122-135. ⟨10.1016/j.jmapro.2024.01.084⟩

Article dans une revue hal-04532046v1
Deposit thumbnail

Assessment of pressure-assisted sintering models through sinter-forging tests: A case study of alumina incorporating capillarity forces

Charles Manière , Christelle Harnois , Christophe Couder , Christelle Bilot , Sylvain Marinel

Ceramics International, 2024, ⟨10.1016/j.ceramint.2024.04.358⟩

Article dans une revue hal-04564275v1
Deposit thumbnail

Ultrafast high-temperature sintering (UHS) vs. conventional sintering of 3YSZ: Microstructure and properties

Mattia Biesuz , Thomas Hérisson de Beauvoir , Emanuele de Bona , Michele Cassetta , Charles Manière et al.

Journal of the European Ceramic Society, 2024, 44 (7), pp.4741-4750. ⟨10.1016/J.JEURCERAMSOC.2024.01.064⟩

Article dans une revue hal-04487686v1
Deposit thumbnail

Fast firing of 3 mol% yttria‐stabilized zirconia: On the effect of heating rate on sintering

Mattia Biesuz , Emanuele de Bona , Charles Manière

Journal of the American Ceramic Society, 2024, ⟨10.1111/jace.19989⟩

Article dans une revue hal-04634546v1
Deposit thumbnail

Finite Element simulation for Si3N4 heating and sintering

Thomas Grippi , Stéphanie Béhar-Lafenetre , Holger Friedrich , Daniel Haas , Uwe Schenderlein et al.

Journal of the European Ceramic Society, 2024, pp.116703. ⟨10.1016/j.jeurceramsoc.2024.116703⟩

Article dans une revue hal-04634611v1
Deposit thumbnail

Sintering simulations for ceramic multilayer laminates with paper-derived ceramics: From sintering dilatometry to anisotropic sintering simulation

Charles Manière , Jérome Lecourt , Benjamin Dermeik , Samuel Schmiedeke , Nahum Travitzky

Journal of the European Ceramic Society, 2024, ⟨10.1016/j.jeurceramsoc.2024.03.031⟩

Article dans une revue hal-04531951v1
Deposit thumbnail

Ti–6Al–4V complex shape production by spark plasma sintering with ceramic–metal sacrificial powder and interface 3D printing

Joseph Le Cloarec , Sylvain Marinel , Claude Estournès , Moukrane Dehmas , Charles Manière

Progress in Additive Manufacturing, 2024, ⟨10.1007/s40964-024-00803-w⟩

Article dans une revue hal-04738221v1
Deposit thumbnail

Flash microwave sintering of alumina

Guillaume Riquet , Sylvain Marinel , Clotilde Lechevallier-Boissel , Christelle Harnois , Charles Manière

Materials Letters, 2023, 330, pp.133327. ⟨10.1016/j.matlet.2022.133327⟩

Article dans une revue hal-03818623v1
Deposit thumbnail

Densification modeling for gas pressure sintered silicon nitride-based ceramics with Thermo-Optical dilatometry

Thomas Grippi , Stéphanie Béhar-Lafenêtre , Holger Friedrich , Daniel Haas , Uwe Schenderlein et al.

Journal of the European Ceramic Society, In press, 44 (2), pp.822-830. ⟨10.1016/j.jeurceramsoc.2023.09.028⟩

Article dans une revue hal-04245052v1
Deposit thumbnail

Ultrafast high-temperature sintering (UHS) of ZrB2-based materials

Emanuele de Bona , Charles Manière , Vincenzo Sglavo , Mattia Biesuz

Journal of the European Ceramic Society, In press, 44 (1), pp.567-573. ⟨10.1016/j.jeurceramsoc.2023.09.007⟩

Article dans une revue hal-04208347v1
Deposit thumbnail

Sintering behavior of ultra-thin 3D printed alumina lattice structures

Charles Manière , Christelle Harnois , Sylvain Marinel

Acta Materialia, 2023, 250, pp.118865. ⟨10.1016/j.actamat.2023.118865⟩

Article dans une revue hal-04077557v1
Deposit thumbnail

Modeling of SrTiO3 polycrystalline substrate grain growth for tuning thin film functional properties

Marie Dallocchio , Charles Manière , Jérôme Lecourt , Ulrike Lüders , Wilfrid Prellier et al.

Applied Materials Today, 2023, 32, pp.101818. ⟨10.1016/j.apmt.2023.101818⟩

Article dans une revue hal-04077479v1
Deposit thumbnail

Modeling spark plasma sintering of zirconia with prediction of final stage high densification rate

Joseph Sambasene Diatta , Christophe Couder , Christelle Harnois , Sylvain Marinel , Charles Manière

Materials Letters, 2023, 337, pp.133930. ⟨10.1016/j.matlet.2023.133930⟩

Article dans une revue hal-03958584v1
Deposit thumbnail

Ultra-rapid debinding and sintering of additively manufactured ceramics by ultrafast high-temperature sintering

Subhadip Bhandari , Charles Maniere , Francesco Sedona , Emanuele de Bona , Vincenzo Sglavo et al.

Journal of the European Ceramic Society, In press, ⟨10.1016/j.jeurceramsoc.2023.08.040⟩

Article dans une revue hal-04200350v1
Deposit thumbnail

Pressure assisted sintering stress exponent assessment methods: Accuracy analysis and effect of sintering stress

Charles Manière , Joseph Sambasene Diatta , Christelle Harnois , Christophe Couder , Christelle Bilot et al.

Mechanics of Materials, 2023, 181, pp.104664. ⟨10.1016/j.mechmat.2023.104664⟩

Article dans une revue hal-04083198v1
Deposit thumbnail

Role of microstructure reactivity and surface diffusion in explaining flash (ultra-rapid) sintering kinetics

Charles Manière , Christelle Harnois , Sylvain Marinel

Journal of the European Ceramic Society, In press, ⟨10.1016/j.jeurceramsoc.2022.12.006⟩

Article dans une revue hal-03927934v1
Deposit thumbnail

Flash microwave sintering of zirconia by multiple susceptors cascade strategy

Guillaume Riquet , Thomas Grippi , Christelle Harnois , Sylvain Marinel , Charles Manière

Journal of the European Ceramic Society, In press, ⟨10.1016/j.jeurceramsoc.2023.04.004⟩

Article dans une revue hal-04077541v1
Deposit thumbnail

Impact of graphite foil rolling on the thermal field homogeneity of spark plasma sintering

Joseph Le Cloarec , Sylvain Marinel , Geoffroy Chevallier , Claude Estournès , Charles Manière

Ceramics International, 2023, ⟨10.1016/j.ceramint.2023.03.028⟩

Article dans une revue hal-04034373v1
Deposit thumbnail

Spark plasma sintering grain growth assessment by densification kinetics analysis

Charles Manière , Joseph Sambasene Diatta , Christophe Couder , Christelle Harnois , Sylvain Marinel

Scripta Materialia, 2023, 228, pp.115346. ⟨10.1016/j.scriptamat.2023.115346⟩

Article dans une revue hal-04016360v1
Deposit thumbnail

Grain growth modeling for gas pressure sintering of silicon nitride based ceramics

Thomas Grippi , Stéphanie Béhar-Lafenetre , Holger Friedrich , Daniel Haas , Uwe Schenderlein et al.

Materials Today Communications, 2022, 34, pp.105189. ⟨10.1016/j.mtcomm.2022.105189⟩

Article dans une revue hal-03940287v1
Deposit thumbnail

Rapid microwave sintering of centimetric zirconia: Scalability and electromagnetic‐thermal‐fluid‐dynamic simulation

Charles Manière , Christelle Harnois , Guillaume Riquet , Thomas Grippi , Stéphanie Behar-Lafenetre et al.

Journal of the American Ceramic Society, 2022, 106 (2), pp.848-859. ⟨10.1111/jace.18787⟩

Article dans une revue hal-03795354v1
Deposit thumbnail

Estimate microstructure development from sintering shrinkage: A kinetic field approach

Charles Manière , Thomas Grippi , Sylvain Marinel

Materials Today Communications, 2022, 31, pp.103269. ⟨10.1016/j.mtcomm.2022.103269⟩

Article dans une revue hal-03588296v1
Deposit thumbnail

Flash sintering of complex shapes

Charles Manière , Geuntak Lee , Eugene A Olevsky

Applied Materials Today, 2022, 26, pp.101293. ⟨10.1016/j.apmt.2021.101293⟩

Article dans une revue hal-03489845v1
Deposit thumbnail

Flash spark plasma sintering of zirconia nanoparticles: Electro-thermal-mechanical-microstructural simulation and scalability solutions

Charles Manière , Christelle Harnois , Guillaume Riquet , Jérôme Lecourt , Christelle Bilot et al.

Journal of the European Ceramic Society, 2022, 42 (1), pp.216-226. ⟨10.1016/j.jeurceramsoc.2021.09.021⟩

Article dans une revue hal-03404194v1
Deposit thumbnail

3D printing of porcelain: finite element simulation of anisotropic sintering

Charles Manière , Christelle Harnois , Sylvain Marinel

International Journal of Advanced Manufacturing Technology, 2021, 116 (9-10), pp.3263-3275. ⟨10.1007/s00170-021-07304-y⟩

Article dans une revue hal-03404162v1
Deposit thumbnail

Additive manufacturing of powder components based on subtractive sintering approach

Maricruz Henkel Carrillo , Geuntak Lee , Charles Maniere , Eugene A Olevsky

Rapid Prototyping Journal, 2021, 27 (9), pp.1731-1736. ⟨10.1108/RPJ-01-2021-0006⟩

Article dans une revue hal-03403488v1
Deposit thumbnail

Issues and opportunities from Peltier effect in functionally-graded colusites: from SPS temperature modeling to enhanced thermoelectric performances

Gabin Guélou , Christophe Couder , Charles Manière , Christophe Candolfi , Bertrand Lenoir et al.

Applied Materials Today, 2021, 22, pp.100948. ⟨10.1016/j.apmt.2021.100948⟩

Article dans une revue hal-03405331v1
Deposit thumbnail

Porous stage assessment of pressure assisted sintering modeling parameters: a ceramic identification method insensitive to final stage grain growth disturbance

Charles Manière , Christelle Harnois , Sylvain Marinel

Acta Materialia, 2021, 211, pp.116899. ⟨10.1016/j.actamat.2021.116899⟩

Article dans une revue hal-03404081v1
Deposit thumbnail

Promoting microstructural homogeneity during flash sintering of ceramics through thermal management

Gareth M Jones , Mattia Biesuz , Wei Ji , Sandra Fisher John , Carolyn Grimley et al.

MRS Bulletin, 2021, 46 (1), pp.59 - 66. ⟨10.1557/s43577-020-00010-2⟩

Article dans une revue hal-03403730v1
Deposit thumbnail

Modeling the sintering trajectories of MgAl2O4 spinel

Gabriel Kerbart , Christelle Harnois , Sylvain Marinel , Charles Manière

Scripta Materialia, 2021, 203, pp.114048. ⟨10.1016/j.scriptamat.2021.114048⟩

Article dans une revue hal-03403541v1
Deposit thumbnail

Master sintering curve with dissimilar grain growth trajectories: A case study on MgAl2O4

Gabriel Kerbart , Charles Manière , Christelle Harnois , Sylvain Marinel

Journal of the European Ceramic Society, 2021, 41 (1), pp.1048-1051. ⟨10.1016/j.jeurceramsoc.2020.09.003⟩

Article dans une revue hal-03011580v1
Deposit thumbnail

3D printing of porcelain and finite element simulation of sintering affected by final stage pore gas pressure

Charles Manière , Christelle Harnois , Sylvain Marinel

Materials Today Communications, 2021, 26, pp.102063. ⟨10.1016/j.mtcomm.2021.102063⟩

Article dans une revue hal-03141588v1
Deposit thumbnail

Flash microwave pressing of zirconia

Charles Manière , Geuntak Lee , Elisa Torresani , John F. Gerling , Vadim V. Yakovlev et al.

Journal of the American Ceramic Society, 2020, ⟨10.1111/jace.17072⟩

Article dans une revue hal-02616768v1
Deposit thumbnail

Modeling zirconia sintering trajectory for obtaining translucent submicronic ceramics for dental implant applications

Charles Manière , Geuntak Lee , Joanna Mckittrick , Shirley Chan , Eugene A. Olevsky

Acta Materialia, 2020, 188, pp.101-107. ⟨10.1016/j.actamat.2020.01.061⟩

Article dans une revue hal-02616736v1
Deposit thumbnail

Graphite creep negation during flash spark plasma sintering under temperatures close to 2000 °C

Charles Manière , Geuntak Lee , Joanna Mckittrick , Andrey Maximenko , Eugene A. Olevsky

Carbon, 2020, 162, pp.106-113. ⟨10.1016/j.carbon.2020.02.027⟩

Article dans une revue hal-02616747v1
Deposit thumbnail

Predicting final stage sintering grain growth affected by porosity

Gabriel Kerbart , Charles Manière , Christelle Harnois , Sylvain Marinel

Applied Materials Today, 2020, 20, pp.100759. ⟨10.1016/j.apmt.2020.100759⟩

Article dans une revue hal-03011566v1
Deposit thumbnail

Modeling sintering anisotropy in ceramic stereolithography of silica

Charles Manière , Gabriel Kerbart , Christelle Harnois , Sylvain Marinel

Acta Materialia, 2020, 182, pp.163-171. ⟨10.1016/j.actamat.2019.10.032⟩

Article dans une revue hal-02449658v1
Deposit thumbnail

Impact of convection and radiation on direct/hybrid heating stability of field assisted sintering

Charles Manière , Flora Borie , Sylvain Marinel

Journal of Manufacturing Processes, 2020, 56, pp.147-157. ⟨10.1016/j.jmapro.2020.04.075⟩

Article dans une revue hal-02616775v1
Deposit thumbnail

Dielectric properties of flash spark plasma sintered BaTiO3 and CaCu3Ti4O12

Charles Manière , Guillaume Riquet , Sylvain Marinel

Scripta Materialia, 2019, 173, pp.41-45. ⟨10.1016/j.scriptamat.2019.07.048⟩

Article dans une revue hal-02449266v1
Deposit thumbnail

Electric current effects in spark plasma sintering: From the evidence of physical phenomenon to constitutive equation formulation

Geuntak Lee , Charles Manière , Joanna Mckittrick , Eugene A. Olevsky

Scripta Materialia, 2019, 170, pp.90-94. ⟨10.1016/j.scriptamat.2019.05.040⟩

Article dans une revue hal-02616798v1
Deposit thumbnail

Microwave sintering of complex shapes: From multiphysics simulation to improvements of process scalability

Charles Manière , Shirley Chan , Eugene A. Olevsky

Journal of the American Ceramic Society, 2019, 102 (2), pp.611-620. ⟨10.1111/jace.15892⟩

Article dans une revue hal-02616810v1
Deposit thumbnail

Microwave Sintering of Alumina at 915 MHz: Modeling, Process Control, and Microstructure Distribution

Sylvain Marinel , Charles Manière , Anthony Bilot , Christelle Bilot , Christelle Harnois et al.

Materials, 2019, 12 (16), pp.2544. ⟨10.3390/ma12162544⟩

Article dans une revue hal-02449318v1
Deposit thumbnail

Consolidation of Molybdenum nanopowders by spark plasma sintering: Densification mechanism and first mirror application

Geuntak Lee , Charles Manière , Joanna Mckittrick , Russell Doerner , Daisuke Nishijima et al.

Journal of Nuclear Materials, 2019, 516, pp.354-359. ⟨10.1016/j.jnucmat.2019.01.028⟩

Article dans une revue hal-02616801v1
Deposit thumbnail

Simultaneous Spark Plasma Sintering of Multiple Complex Shapes

Charles Manière , Elisa Torresani , Eugene A. Olevsky

Materials, 2019, 12 (4), pp.557. ⟨10.3390/ma12040557⟩

Article dans une revue hal-02616802v1
Deposit thumbnail

Oxidation effects on spark plasma sintering of molybdenum nanopowders

Geuntak Lee , Christina Back , Eugene A. Olevsky , Charles Manière , Joanna Mckittrick et al.

Journal of the American Ceramic Society, 2018, ⟨10.1111/jace.16182⟩

Article dans une revue hal-02616806v1
Deposit thumbnail

Energy efficient spark plasma sintering: Breaking the threshold of large dimension tooling energy consumption

Charles Manière , Geuntak Lee , Joanna Mckittrick , Eugene A. Olevsky

Journal of the American Ceramic Society, 2018, ⟨10.1111/jace.16046⟩

Article dans une revue hal-02616807v1
Deposit thumbnail

Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering

Geuntak Lee , Eugene A. Olevsky , Charles Manière , Andrey Maximenko , Oleg Izhvanov et al.

Acta Materialia, 2018, 144, pp.524-533. ⟨10.1016/j.actamat.2017.11.010⟩

Article dans une revue hal-02616820v1
Deposit thumbnail

Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation

Charles Manière , Geuntak Lee , Tony Zahrah , Eugene A. Olevsky

Acta Materialia, 2018, 147, pp.24-34. ⟨10.1016/j.actamat.2018.01.017⟩

Article dans une revue hal-02616814v1
Deposit thumbnail

Sintering dilatometry based grain growth assessment

Charles Manière , Shirley Chan , Geuntak Lee , Joanna Mckittrick , Eugene A. Olevsky

Results in Physics, 2018, 10, pp.91-93. ⟨10.1016/j.rinp.2018.05.014⟩

Article dans une revue hal-02616812v1
Deposit thumbnail

A spark plasma sintering densification modeling approach: from polymer, metals to ceramics

Charles Manière , Lise Durand , Geoffroy Chevallier , Claude Estournès

Journal of Materials Science, 2018, 53 (10), pp.7869-7876. ⟨10.1007/s10853-018-2096-8⟩

Article dans une revue hal-01737655v1
Deposit thumbnail

Swelling negation during sintering of sterling silver: An experimental and theoretical approach

Charles Manière , Elia Saccardo , Geuntak Lee , Joanna Mckittrick , Alberto Molinari et al.

Results in Physics, 2018, 11, pp.79-84. ⟨10.1016/j.rinp.2018.08.035⟩

Article dans une revue hal-02616809v1
Deposit thumbnail

Fluid dynamics thermo-mechanical simulation of sintering: Uniformity of temperature and density distributions

Charles Manière , Tony Zahrah , Eugene A. Olevsky

Applied Thermal Engineering, 2017, 123, pp.603-613. ⟨10.1016/j.applthermaleng.2017.05.116⟩

Article dans une revue hal-02616826v1
Deposit thumbnail

In-situ creep law determination for modeling Spark Plasma Sintering of TiAl 48-2-2 powder

David Martins , Fanny Grumbach , Charles Manière , Pierre Sallot , Katia Mocellin et al.

Intermetallics, 2017, 86, pp.147 - 155. ⟨10.1016/j.intermet.2017.03.006⟩

Article dans une revue hal-01509753v1
Deposit thumbnail

Porosity dependence of powder compaction constitutive parameters: Determination based on spark plasma sintering tests

Charles Manière , Eugene A. Olevsky

Scripta Materialia, 2017, 141, pp.62-66. ⟨10.1016/j.scriptamat.2017.07.026⟩

Article dans une revue hal-02616817v1
Deposit thumbnail

All-Materials-Inclusive Flash Spark Plasma Sintering

Charles Manière , Geuntak Lee , Eugene A. Olevsky

Scientific Reports, 2017, 7 (1), ⟨10.1038/s41598-017-15365-x⟩

Article dans une revue hal-02616816v1
Deposit thumbnail

Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO 2

Charles Manière , Tony Zahrah , Eugene A. Olevsky

Journal of the American Ceramic Society, 2017, 100 (6), pp.2439-2450. ⟨10.1111/jace.14762⟩

Article dans une revue hal-02616829v1
Deposit thumbnail

Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process

Charles Manière , Geuntak Lee , Eugene A. Olevsky

Results in Physics, 2017, 7, pp.1494-1497. ⟨10.1016/j.rinp.2017.04.020⟩

Article dans une revue hal-02616827v1
Deposit thumbnail

Spark plasma sintering and complex shapes: The deformed interfaces approach

Charles Manière , Emmanuel Nigito , Lise Durand , Alicia Weibel , Yannick Beynet et al.

Powder Technology, 2017, 320, pp.340-345. ⟨10.1016/j.powtec.2017.07.048⟩

Article dans une revue hal-01670313v1
Deposit thumbnail

Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process

Charles Manière , Lise Durand , Elodie Brisson , Henri Desplats , Patrick Carré et al.

Journal of the European Ceramic Society, 2017, vol. 37 (n° 4), pp. 1593-1605. ⟨10.1016/j.jeurceramsoc.2016.12.010⟩

Article dans une revue hal-01537962v1
Deposit thumbnail

Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO2

Charles Manière , Tony Zahrah , Eugene A. Olevsky

Scripta Materialia, 2017, 128, pp.49-52. ⟨10.1016/j.scriptamat.2016.10.008⟩

Article dans une revue hal-02616830v1
Deposit thumbnail

Identification of the Norton-Green Compaction Model for the Prediction of the Ti-6Al-4V Densification During the Spark Plasma Sintering Process

Charles Manière , Ugras Kus , Lise Durand , Ronan Mainguy , Julitte Huez et al.

Advanced Engineering Materials, 2016, vol. 18 (n° 10), p.1720-1727. ⟨10.1002/adem.201600348⟩

Article dans une revue hal-01493174v1
Deposit thumbnail

A predictive model to reflect the final stage of spark plasma sintering of submicronic α-alumina

Charles Manière , Lise Durand , Alicia Weibel , Claude Estournès

Ceramics International, 2016, vol. 42 (n° 7), pp. 9274-9277. ⟨10.1016/j.ceramint.2016.02.048⟩

Article dans une revue hal-01486921v1
Deposit thumbnail

Spark-plasma-sintering and finite element method: From the identification of the sintering parameters of a submicronic α-alumina powder to the development of complex shapes

Charles Manière , Lise Durand , Alicia Weibel , Claude Estournès

Acta Materialia, 2016, vol. 102, pp. 169-175. ⟨10.1016/j.actamat.2015.09.003⟩

Article dans une revue hal-01447965v1
Deposit thumbnail

Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process

Charles Manière , Anthony Pavia , Lise Durand , Geoffroy Chevallier , Khalid Afanga et al.

Journal of the European Ceramic Society, 2016, 36 (3), pp.741-748. ⟨10.1016/j.jeurceramsoc.2015.10.033⟩

Article dans une revue hal-01727546v1
Deposit thumbnail

A sacrificial material approach for spark plasma sintering of complex shapes

Charles Manière , Lise Durand , Alicia Weibel , Geoffroy Chevallier , Claude Estournès

Scripta Materialia, 2016, vol. 124, pp. 126-128. ⟨10.1016/j.scriptamat.2016.07.006⟩

Article dans une revue hal-01449277v1
Deposit thumbnail

Powder/die friction in the spark plasma sintering process: Modelling and experimental identification

Charles Manière , Lise Durand , Claude Estournès

Scripta Materialia, 2016, vol. 116, pp. 139-142. ⟨10.1016/j.scriptamat.2016.01.040⟩

Article dans une revue hal-01486908v1
Deposit thumbnail

Dog-bone copper specimens prepared by one-step spark plasma sintering

Claire Arnaud , Charles Manière , Geoffroy Chevallier , Claude Estournès , Ronan Mainguy et al.

Journal of Materials Science, 2015, 50 (22), pp.7364-7373. ⟨10.1007/s10853-015-9293-5⟩

Article dans une revue hal-01727547v1
Deposit thumbnail

Pulse analysis and electric contact measurements in spark plasma sintering

Charles Manière , Anthony Pavia , Lise Durand , Geoffroy Chevallier , Vincent Bley et al.

Electric Power Systems Research, 2015, vol. 127, pp. 307-313. ⟨10.1016/j.epsr.2015.06.009⟩

Article dans une revue hal-01493438v1
Deposit thumbnail

Local Distortions in Nanostructured Ferroelectric Ceramics through Strain Tuning

Gilles Philippot , Marjorie Albino , Romain Epherre , Geoffroy Chevallier , Yannick Beynet et al.

Advanced Electronic Materials, 2015, 1 (10), 1500190 (8 p.). ⟨10.1002/aelm.201500190⟩

Article dans une revue hal-01222865v1

Frittage de céramiques par chauffage micro-ondes

Sylvain Marinel , François Valdivieso , Charles Manière

Techniques de l'Ingénieur, Matériaux | Verres et céramiques |Céramiques : propriétés et élaboration (N4808 v1), Editions T.I., 2021, ⟨10.51257/a-v1-n4808⟩

Chapitre d'ouvrage emse-04932394v1

Frittage de céramiques par chauffage micro-ondes

Sylvain Marinel , François Valdivieso , Charles Manière

Techniques de l’ingénieur, pp.N4 808, 2021, Matériaux - Verres et céramiques, ⟨10.51257/a-v1-n4808⟩

Chapitre d'ouvrage hal-03404242v1

How to overcome the main challenges of SPS technology: Reproducibility, multi-samples and elaboration of complex shapes

Charles Manière , Ugras Kus , Geoffroy Chevallier , Alicia Weibel , Lise Durand et al.

Extrait de : Spark Plasma Sintering : Current status, new developments and challenges (chap. 3), Elsevier, pp.77-108, 2019, 978-0-12-817744-0. ⟨10.1016/B978-0-12-817744-0.00003-9⟩

Chapitre d'ouvrage hal-02168256v1

Poudre sacrificielle comprenant un mélange homogène de poudre de dioxyde de titane et de poudre de magnétite FR3156440-A1

Charles Manière , Joseph Le Cloarec , Sylvain Marinel , Claude Estournès

France, N° de brevet: FR3156440-A1. 2023

Brevet hal-05388225v1

Poudre sacrificielle comprenant un mélange homogène de poudre de fer et de poudre de magnétite FR3156354-A1

Charles Manière , Joseph Le Cloarec , Sylvain Marinel , Claude Estournès

France, N° de brevet: FR3156354-A1. 2023

Brevet hal-05388228v1

Selective sintering-based fabrication of fully dense complex shaped parts

Geuntak Lee , Charles Manière , Eugene A. Olevsky

United States, Patent n° : US62/662,762. 2018

Brevet hal-02617423v1

In situ partially degradable separation interface for fabrication of complex near net shape objects by pressure assited sintering

Charles Manière , Eugene A. Olevsky

United States, Patent n° : WO2019/191299A1. 2018

Brevet hal-02617420v1

Procédé de fabrication d'une pièce par densification sous charge

Claude Estournès , Charles Manière , Geoffroy Chevallier , Vincent Baylac

France, Patent n° : FR3088017-A1. 2018

Brevet hal-02617435v1

Procédé de fabrication d'une pièce par densification sous charge

Claude Estournès , Charles Manière , Geoffroy Chevallier , Vincent Baylac

France, Patent n° : FR3088016-A1. 2018

Brevet hal-02617428v1

Use of a deformable interface for the production of complex parts

Charles Manière , Lise Durand , Claude Estournès

France, Patent n° : WO2017077028A1. 2015

Brevet hal-02617150v1