Claude Marchand
Publications
Publications
|
|
Comparative Evaluation of Two-Level Inverters and a Disruptive Multi-Level Solution: Impact of Switch TechnologyThe 26th European Conference on Power Electronics and Applications, GDR SEEDS France & EPE Association, Mar 2025, Paris, France. ⟨10.34746/epe2025-0245⟩ |
Comparing Methods for Sizing and Operating Heat Pumps in Low-Voltage Feeders2024 20th International Conference on the European Energy Market (EEM), Jun 2024, Istanbul, Turkey. pp.1-6, ⟨10.1109/EEM60825.2024.10608946⟩ |
|
|
|
Comparaison des pertes dans une chaîne de traction conventionnelle et dans une chaîne de traction avec onduleur à batterie distribuée10ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme (NUMELEC 2024), Jul 2024, Toulouse, France |
|
|
Metamodel-Based Electric Vehicle Powertrain Optimization : A Drive Cycle Approach2023 IEEE International Electric Machines & Drives Conference (IEMDC), May 2023, San Francisco, United States. pp.1-5, ⟨10.1109/IEMDC55163.2023.10238941⟩ |
Clustering methods to select representative days for heat pumps optimal operation accounting for electricity grid constraints2023 IEEE PES Innovative Smart Grid Technologies Europe (ISGT EUROPE), Oct 2023, Grenoble, France. pp.1-5, ⟨10.1109/ISGTEUROPE56780.2023.10407974⟩ |
|
|
|
Étude et Dimensionnement d'une Machine Synchrone pour un Convertisseur Distribué dans la BatterieSymposium de Génie Electrique (SGE2023), Laboratoire d'Électrotechnique et d'Électronique de Puissance de Lille (L2EP), Jul 2023, Lille, France |
|
|
Design and analysis of a Circulatory Assistance Benchmark Actuator for an Artificial Lung2022 International Conference on Electrical Machines (ICEM), Sep 2022, Valencia, Spain. pp.827-833, ⟨10.1109/ICEM51905.2022.9910858⟩ |
|
|
Kriging Metamodel for Electric Machines: A Drive Cycle Approach2022 International Conference on Electrical Machines (ICEM), Sep 2022, Valencia, Spain. pp.251-256, ⟨10.1109/ICEM51905.2022.9910946⟩ |
|
|
Conception d'un actionneur d'assistance circulatoire4ème Symposium de Génie Électrique (SGE 2021), Jul 2021, Nantes, France |
Turning Sun into Water - Present status and perspectivesWind Empowerment Online Conference (WEOnline2020), Nov 2020, virtuel, France |
|
Installation PV équipée de réflecteurs plans : Quelles sont les conséquences d’un éclairement non uniforme sur la production PVJournées Nationales du PhotoVoltaïque (JNPV), Dec 2020, Dourdan, France |
|
Conception optimale des systèmes photovoltaïques de pompage d’eau en sites isolés avec prise en compte des aspects socio-économiquesConférence des Jeunes Chercheurs en Génie Electrique (JCGE 2019), Jun 2019, Oléron, France |
|
|
|
Modelling and Optimal Sizing of Photovoltaic Water Pumping Systems – Sensitivity Analysis2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), May 2019, Monte-Carlo, France. pp.1-9, ⟨10.1109/EVER.2019.8813580⟩ |
|
|
Effect of irradiance data on the optimal sizing of photovoltaic water pumping systems2019 IEEE 46th Photovoltaic Specialists Conference (PVSC), Jun 2019, Chicago, United States. pp.0653-0658, ⟨10.1109/PVSC40753.2019.8981282⟩ |
Linear interpolation-based method with branch connection constraints for movement in reluctance network modelConference COMPUMAG 2019, Jul 2019, Paris, France |
|
|
|
Impact de la commande intermittente sur la pulsation du couple d'une machine à réluctance variable pour véhicule électrique3ème Symposium de Génie Electrique (SGE 2018), Université de Lorraine [UL], Jul 2018, Nancy, France |
Performance of the Intermittent Control for Switched Reluctance Machine on Driving Cycle2018 XIII International Conference on Electrical Machines (ICEM), Sep 2018, Alexandroupoli, France. pp.1636-1642, ⟨10.1109/ICELMACH.2018.8506700⟩ |
|
|
|
Influence of the temporal resolution of the water consumption profile on photovoltaic water pumping systems modelling and sizing7th International Conference on Renewable Energy Research and Applications (ICRERA 2018), Oct 2018, Paris, France. ⟨10.1109/icrera.2018.8566828⟩ |
|
|
Modélisation et validation expérimentale d'un système de pompage photovoltaïque dans une communauté rurale isolée du Burkina Faso3ème Symposium de Génie Electrique (SGE 2018), Université de Lorraine [UL], Jul 2018, Nancy, France |
An Improved Finite Reluctance Approach based on Complementary Distributed Magneto-motive ForcesEighteenth Biennial IEEE Conference on Electromagnetic Field Computation - CEFC 2018, Oct 2018, Hangzhou, China |
|
Estimation de l’irradiance arrivant sur une installation PV équipée de réflecteurs plansJournées Nationales du PhotoVoltaïque (JNPV) 2018, Dec 2018, Dourdan, France |
|
|
|
Experimental validation of off-line energy management strategies applied to a hybrid FC/SC systemELECTRIMACS 2017, Jul 2017, Toulouse, France |
Impact of the intermittent control on the vibration behavior of a switched reluctance machine2017 IMACS International conference on theory and application of modeling and simulation in electrical power engineering (Electrimacs, Nov 2017, Toulouse, France |
|
Impact of the intermittent control on the torque pulsation of a switched reluctance machine2017 IEEE Vehicle Power and Propulsion Conference (VPPC), Dec 2017, Belfort, France. ⟨10.1109/vppc.2017.8330888⟩ |
|
|
|
A-ECMS and SDP Energy Management Algorithms applied to a Fuel Cell Electric Scooter2017 IEEE Vehicle Power and Propulsion Conference (VPPC), Dec 2017, Belfort, France. pp.1-5, ⟨10.1109/VPPC.2017.8330968⟩ |
Intermittent control for efficiency gain of a switched reluctance machine2017 IEEE International Electric Machines and Drives Conference (IEMDC) , May 2017, Miami, United States. ⟨10.1109/IEMDC.2017.8001870⟩ |
|
Comparison of two control strategies regarding vibration criterion for switched reluctance machine8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), Apr 2016, Glasgow, United Kingdom. ⟨10.1049/cp.2016.0216⟩ |
|
|
|
Comparaison de modifications géométriques d'une MRV pour la traction électrique2nd Symposium de Génie Électrique (SGE 2016), Jun 2016, Grenoble, France |
|
|
Couplage Magnéto-Mécanique pour le Dimensionnement de Machines Électriques2nd Symposium de Génie Électrique (SGE 2016), Jun 2016, Grenoble, France |
|
|
Comparison between Analytic Calculation and Finite Element Modeling in the Study of Winding Geometry Effect on Copper Losses2nd Symposium de Génie Électrique (SGE 2016), Symposium de Genie Electrique, Jun 2016, Grenoble, France |
Model-Order Reduction of Electrical Machines by Means of POD and DEI methods for Copper Loss Calculation10th International Symposium on Electric and Magnetic Fields (EMF 2016), Apr 2016, Lyon, France |
|
|
|
Real-time HEV energy management strategies2nd Symposium de Génie Électrique (SGE 2016), Jun 2016, Grenoble, France |
The Boundary Condition Effects on Reduced Finite Element Models for Eddy Currents Loss Calculation10th International Symposium on Electric and Magnetic Fields (EMF 2016), Apr 2016, Lyon, France |
|
|
|
2D Modeling of Litz Wire : Reduced Model and its Application for Switched Reluctance MachineCompumag 2015, Jun 2015, montreal, Canada |
Modeling and optimization of an induction machine for the application of electrical vehicleINTERNATIONAL SYMPOSIUM on ELECTROMAGNETIC FIELDS in MECHATRONICS, ELECTRICAL and ELECTRONIC ENGINEERING – ISEF’2015, Sep 2015, Valence, Spain |
|
|
|
Optimization and performance comparisons of Induction and Synchronous Reluctance Machines considering the driving cycle of an electrical vehicle2015 IEEE International Electric Machines & Drives Conference (IEMDC), May 2015, Coeur d'Alene, United States. ⟨10.1109/IEMDC.2015.7409096⟩ |
|
|
Calcul des Pertes Cuivre dans les Conducteurs Multi- filamentaires et Application aux Bobinages des Machines à Réluctance Variable à Double Saillance8ème Conférence Européenne sur les Méthodes Numériques en Electromagnétisme (NUMELEC 2015), Jun 2015, Saint-Nazaire, France |
|
|
A new generic problem formulation dedicated to electrified railway systemsESARS 2015, Mar 2015, Aachen, Germany. ⟨10.1109/ESARS.2015.7101437⟩ |
|
|
Diagnostic des capteurs pour la commande des entrainements électriques1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
|
|
Pré-dimensionnement d'une machine synchrone à aimants permanents validé par un modèle dynamique1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
Current-sharing control technique of interleaved buck converter for automotive application7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), Apr 2014, Manchester, United Kingdom. pp.1-6, ⟨10.1049/cp.2014.0448⟩ |
|
Pré-dimensionnement d'une machine synchrone à aimants permanents sous contrainte de masseSymposium de Génie Electrique, Jul 2014, Cachan, France |
|
Current Sensor Fault Diagnosis in the Stationary Frame for PMSM Drive in Automotive SystemsEVER 2014, Mar 2014, Monte-Carlo, Monaco. pp.1-7, ⟨10.1109/EVER.2014.6844143⟩ |
|
|
|
Gestion énergétique optimale au service de la conception de chaînes de traction hybridesSymposium de Génie Électrique 2014, Jul 2014, Cachan, France |
|
|
Modélisation comportementale non linéaire de moteurs asynchrones à cage pour le pré-dimensionnement1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
Reliability assesment in the design of interleaved converters under multi-physical constraints2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE), Jun 2014, Istanbul, Turkey. pp.2117-2121, ⟨10.1109/isie.2014.6864944⟩ |
|
|
|
Reduction des ondulations de couple et des efforts radiaux dans une machine a reluctance variable1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
Evaluation of a switched reluctance motor with magnetic slot wedges2014 International Conference on Electrical Machines (ICEM), Sep 2014, Berlin, Germany. ⟨10.1109/ICELMACH.2014.6960173⟩ |
|
Evaluation and comparison of the axial SRM and radial SRM in EVCEFC 2014, G2Elab, May 2014, Annecy, France. pp.PE1-14 |
|
Multi-objective Optimization of an Axial-flux PM Actuator with Space Mapping TechniqueCEM 2014 : Conference on Electro Magnetics 2014, Mar 2014, London, United Kingdom. pp.117, ⟨10.1049/cp.2014.0227⟩ |
|
|
|
An optimal energetic approach for systemic design of hybrid powertrain2014 IEEE Vehicle Power and Propulsion Conference (VPPC), Oct 2014, Coimbra, Portugal. pp.1-6, ⟨10.1109/VPPC.2014.7007014⟩ |
|
|
Modélisation et caractérisation d'une machine à réluctance variable à double saillance avec bobinage d'excitation1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
Design with Optimization of an Interleaved Buck Converter for Automotive Application; Effect of the EMC Constraint7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), Apr 2014, Manchester, United Kingdom. pp.1-6, ⟨10.1049/cp.2014.0260⟩ |
|
|
|
Intégration de la fiabilité dans la conception sous contraintes multi-physiques des convertisseurs statiques multicellulaires1er Symposium de Génie Électrique (SGE 2014), Jul 2014, Cachan, France |
A differential algebraic approach for position/speed estimation in PMSMIEMDC 2013, May 2013, Chicago, United States. pp.1149 - 1154, ⟨10.1109/IEMDC.2013.6556304⟩ |
|
A simplified time stepping nonlinear mesh based reluctance network for machine designIEEE IEMDC 2013, May 2013, Chicago, United States. pp.879 - 884, ⟨10.1109/IEMDC.2013.6556201⟩ |
|
Design of Interleaved Power Converters under Volume, Efficiency and Thermal ConstraintsPCIM Europe - The International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, May 2013, Nuremberg, Germany. pp.1316-1323 |
|
Quantitative Evaluation of Small Anomalies in Non-Destructive Testing using Partial Least Square RegressionColloque Inductique 2013, Apr 2013, Tizi-Ouzou, Algeria. pp.83-84 |
|
Sensor Fault Diagnosis for Improving the Availability of Electrical DrivesIECON 2013, Nov 2013, Vienne, Austria. pp.3108 - 3113, ⟨10.1109/IECON.2013.6699625⟩ |
|
|
|
Embedded multilevel optimization for nonlinear time-stepping mesh-based reluctance network2013 Computation of Electromagnetic Fields (COMPUMAG), Jul 2013, Budapest, Hungary |
|
|
TRIZ methodology adapted to hybrid powertrainsTRIZ FUTURE CONFERENCE 2013, Sep 2013, Paris, France. pp.283-292 |
Design methodology with optimization of an interleaved buck converter for automotive applicationIEEE EUROCON 2013, Jul 2013, Kiev, Ukraine. pp.1066-1072, ⟨10.1109/eurocon.2013.6625113⟩ |
|
|
|
Design approach of an axial flux motor for electrical powertrain vehicleICEM 2012, Sep 2012, Marseille, France. pp.2812-2817, ⟨10.1109/ICElMach.2012.6350285⟩ |
Radial output space mapping for electromechanical systems designOIPE 2012, Sep 2012, Gand, Belgium. pp.22-23 |
|
PMSM cogging torque reduction: Comparison between different shapes of magnetREVET 2012, Mar 2012, Hammamet, Tunisia. pp.206 - 211, ⟨10.1109/REVET.2012.6195272⟩ |
|
Evaluation of Torque-Speed Curve of Switched Reluctance Motor with Segmental RotorICEM 2012, Sep 2012, Marseille, France. pp.250 - 255, ⟨10.1109/ICElMach.2012.6349873⟩ |
|
Optimal Design of a renewable energy power plant for an isolated site in SenegalREVET 2012, Mar 2012, Hammameth, Tunisia. pp.336-343, ⟨10.1109/REVET.2012.6195293⟩ |
|
Electrical architecture for high power segmented PEM Fuel Cell in vehicle applicationREVET 2012, Mar 2012, Hammamet, Tunisia. pp.15 - 22, ⟨10.1109/REVET.2012.6195242⟩ |
|
Impact of command parameters on efficiency, torque ripple and vibrations for switched reluctance motorICEM 2012, Sep 2012, Marseille, France. pp.2975 - 2980, ⟨10.1109/ICElMach.2012.6350311⟩ |
|
Evaluation of a Planar Coil Model Using Shell ElementsPIERS 2011, Mar 2011, Morocco. pp.1 |
|
Optimized Sizing of AC Coupled Hybrid Sources for Isolated VillagesEF2011, 2011, France |
|
Prise en compte des milieux fins dans le CND CF grâce à la méthode overlapping2ème Colloque National sur l'Inductique, May 2011, Béjaïa, Algérie |
|
Design of electric powertrains for vehicles using driving cyclesCompumag 2011, Jul 2011, Sydney, Australia. pp.1-2 |
|
Modeling of SRM vibrations for two current controlsElectrimacs 2011, Sep 2011, Cergy-Pontoise, France. pp.1-6 |
|
Bilan du projet O2M sur la conception et l'optimisation de systèmes mécatroniques pour l'automobileGIFAS, Commission RandD, Groupe de travail Systèmes Electriques, Oct 2011, Paris, France |
|
Design and Study of a Permanent Magnet Synchronous Motor for an Electric CompressorPIERS 2011, Mar 2011, Marrakech, Morocco. pp.171-175 |
|
Structuration de modèles pour l'optimisation parallélisée sous MatlabWebinar DIMOCODE de la communauté "Actionneurs Électriques", May 2011, Paris, France |
|
Improvement of a permanent magnet synchronous motor for an electrical compressorIECON 2011, Nov 2011, Melbourne, Australia. pp.1-6 |
|
Analytical Computation of Stator Iron Losses in Interior Permanent-Magnet Synchronous MachineICEM 2010 – XIX International Conference on Electrical Machines, Sep 2010, Rome, Italy. CD-Rom proceedings |
|
Approche multi-niveaux de pré-dimensionnement de convertisseurs statiques par optimisation sous contraintes multi-physiquesEPF'10 - Electronique de Puissance du Futur, Jun 2010, Saint Nazaire, France. session poster |
|
Pre-sizing of DC-DC converters by optimizationunder constraints. Influence of the control constraint on the optimization resultsICIT'10, Mar 2010, Valparaiso, Chile. pp.oral session |
|
|
|
Action palliative par le convertisseur statique en cas de défaillance d'un générateur PAC modulaire de puissanceEPF 2010, Electronique de Puissance du Futur, Jun 2010, Saint Nazaire, France. 6p |
|
|
Fault detection and identification using simple and non-intrusive on-line monitoring techniques for PEM fuel cell2010 IEEE International Symposium on Industrial Electronics (ISIE 2010), Jul 2010, Bari, Italy. pp.2029-2034, ⟨10.1109/isie.2010.5637474⟩ |
Steady State Performance Computation of a Synchronous Machine using HarmonicISIE 2010 - International Symposium on Industrial Electronics, Jul 2010, BARI, Italy. CD-Rom proceedings |
|
Design by optimization of a Boost converter. Integration of the control aspectPCIM'10, May 2010, Nuremberg, Germany. pp.oral session |
|
|
|
Optimization of a power electronic structure for hybrid Fuel Cell/Ultracapacitors vehicle2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Sep 2010, Lille, France. pp.1-6, ⟨10.1109/vppc.2010.5729165⟩ |
Partial Least Square Regression for Quantitative Evaluation of Small Anomalies in Non-Destructive TestingCEFC 2010, May 2010, Chicago, United States. 4 p |
|
|
|
Supercapacitors for Power Assistance in Hybrid Power Source with Fuel CellIEEE-IECON 2009, the 35th Annual Conference of the IEEE Industrial Electronics Society, Nov 2009, Porto, Portugal. pp.11-18, ⟨10.1109/IECON.2009.5415129⟩ |
Pre-sizing approach of DC-DC Buck converters for the automotive domainPCIM'09 Power Conversion Intelligent Motion, May 2009, Nuremberg, Germany |
|
Influence des convertisseurs électroniques sur le dimensionnement optimal de machines hautes vitessesEF 2009, Sep 2009, Compiègne, France. pp.CD-Rom Proceedings |
|
Comparaison d'architectures d'hybridation d'une pile à combustible avec des supercondensateursEF 2009, Électrotechnique du futur, Sep 2009, COMPIEGNE, France. 11 p |
|
Modélisation multiphysique d'un moteur synchrone à flux axial et à aimants permanentsLes journées Électrotechnique du Futur, EF2009, Sep 2009, Compiègne, France. 8 p |
|
Comparative study of thin-film silicon cell tandem structures pm-Si:H/µc-Si:H in system association prospectEuropean Materials Research Society – EMRS Spring Meeting, 2009, Strasbourg, France. pp.CD-Rom Proceedings |
|
A new pre-sizing approach of DC-DC converters application to a Boost converter for the automotive domainIECON'09 Annual Conference of the IEEE Inductrial Electronics Society, Nov 2009, Porto, Portugal |
|
Modeling guidelines and tools comparison for electromechanical system design in automotive applications - Application to a motorized hatchbackProceedings of the 7th European Mechatronics Meeting, Jun 2009, Paris, France |
|
Planar Coil Model using Shell Elements Applied to an Eddy-Current Non-Destructive Testing17th Conference on the computation of electromagnetics fields, COMPUMAG 2009, Dec 2009, Florianopolis, Brésil. pp. 873-874 |
|
An Analytical Model for Interior Permanent-Magnet Synchronous Machine with Circumferential Magnetization DesignELECTROMOTION 2009 – EPE Chapter ‘Electric Drives', Jul 2009, Lille, France. CD-Rom proceedings |
|
Review of MPPT Techniques for Photovoltaic Systems2nd International Conference on Energy and Environmental Protection in Sustainable Development, Nov 2009, Hebron, France |
|
Design of an optimized SRM control architecture based on a hardware/software partitioningIEEE Industrial Electronics, IECON 2009, Nov 2009, Porto, Portugal. 6 p |
|
A pre-sizing approach of DC-DC converters, application to design a Buck converter for the automotive domain2009 IEEE 6th International Power Electronics and Motion Control Conference, May 2009, WUHAN, China. pp.517 - 523, ⟨10.1109/IPEMC.2009.5157442⟩ |
|
Structure and Control Strategy for a Parallel Hybrid Fuel Cell/Supercapacitors Power SourceIEEE-VPPC 2009, The 5th IEEE Vehicle Power and Propulsion Conference, Sep 2009, Dearborn, United States. pp. 1858-1863 |
|
Mise en oeuvre de la conduction continue pour la commande de la machine à réluctance variableCongrès Electrotechnique du Futur, Sep 2009, Compiègne, France. 6 p |
|
Analyse of different programming solutions adapted to block matrix type in electromagnetic modellingCOMPUMAG, Nov 2009, FLorianapolis, Brésil |
|
A system study on silicon thin-film pm-Si:H/µc-Si:H tandem cell structure24th European Photovoltaic Solar Energy Conference, Sep 2009, Hambourg, Germany. pp. 3699-3705 |
|
Mesh Refinement in Eddy Current Testing with Separated T-R probesCOMPUMAG, Nov 2009, Florianópolis, Brazil. pp. 1048-1049 |
|
Accounting of axial component field in double excited motors using 2D-FEM8th International Symposium on Electric and Magnetic Fields, EMF 2009, May 2009, Mondovi, Italie. 8 p |
|
A new pre-sizing approach of DC-DC converters, application to a boost converter for the automotive domainIECON'09, Nov 2009, Porto, Portugal. pp.3767 - 3772, ⟨10.1109/IECON.2009.5415375⟩ |
|
Modélisation en CND : de la conception à l'inversionCNI'09, 2009, Algérie. pp.10 |
|
Optimisation Software Tool Review and the Need of Alternative Means for Handling the Problems of Excess Energy and Mini-Grid Configuration: A Case Study from LaosASEAN Symposium on Power and Energy Systems, Sep 2009, Hua Hin, Thailand. pp. 53-58 |
|
Analytical computation of IPMSM air gap magnetic flux density and Electrical parameters considering space harmonicsISEF 2009 - XIV International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Sep 2009, Arras, France. CD-Rom proceedings |
|
Comparison of instantaneous and average torqueIEEE International Symposium on Industrial Electronics ISIE, 2008, Cambridge, United Kingdom |
|
Study of the DOF management of dual formulations for the modelling of thin cracks in ECTEuropean Magnetic Sensors and Actuators Conference EMSA 2008 Conference, Jul 2008, Caen, France |
|
|
|
Vers de nouvelles approches pour la capitalisation des modèles pour la simulation et l'optimisation : l'expérience du projet DIMOCODENumélec 2008, Dec 2008, Liège, Belgique. pp.156-157 |
Speed control of a switched reluctance machine in continuous conduction modeInternational conference on electrical machines, ICEM, 2008, Portugal |
|
Design methodology of fuel cell electric vehicle power systemIEEE the 2008 International Conference on Electrical Machines, Sep 2008, Villamoura, Portugal |
|
Performances d'une sonde matricielle à microbobines pour la détection par courants de Foucault de défauts débouchants de faibles dimensionsJournées COFREND, May 2008, Toulouse, France |
|
Non destructive evaluation of small defects using an eddy current microcoil sensor arrayEMSA 2008 Conference, Jul 2008, Caen, France |
|
Pattern recognition for diagnosis of inverter fed induction machine drive: a step toward reliabilityIET Colloquium on Reliability in Electromagnetic Systems, May 2007, Paris, France. pp.1-5 |
|
|
|
High Speed Range Enhancement of a Switched Reluctance Motor with Continous ModeEVER 2007, Apr 2007, MONACO, Monaco. 8p |
Adaptive Mesh Refinement and Probe Signal Calculation in Eddy Current NDT by Complementary Formulations16th International Conference on the Computation of Electromagnetic Fields (COMPUMAG), Jun 2007, Aachan, Germany |
|
Study on the calculation by FEM-BIM combination of the EC signal due to a crack in presence of an edge12th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE 2007), May 2007, Cardiff, United Kingdom |
|
Développement d’un outil de simulation numérique pour le CND par courants de FoucaultÉlectrotechnique du Futur (EF’2007), Sep 2007, Toulouse, France |
|
Fine modeling of a tunable micro-inductance by a FEM based approachThe International Conference on Electrical Engineering and its Applications (ICEE’06), May 2006, Sidi-Bel-Abbes, Algeria |
|
Computational Environment for the Fast Calculation of ECT Probe Signal15th Conference on the Computation of Electromagnetic Fields (COMPUMAG 2005), May 2005, Shenyang, China |
|
Inversion en CND par réseaux de neuronesLes journées COFREND, May 2005, Beaune, France |
|
Neural networks eddy current non-destructive evaluation of a conductive plateInternational Symposium on Interdisciplinary Electromagnetic, Mechanic and Biomedical problems (ISEM 2005), Sep 2005, Bad Gastein, Austria |
|
Modélisations BF et HF de bobines gravéesJournées de la simulation numérique, Nov 2005, Natntes, France |
|
|
|
Optimisation du nombre de spires et des angles de commandes d'un moteur à réluctance à double saillance pour application de traction électriqueElectrotechnique du Futur 2005, Sep 2005, GRENOBLE, France. 5p |
Development of an hybrid 3D finite element method for the modeling of micro-coil sensors and actuatorsThe European Magnetic Sensors and Actuators, Jul 2004, Cardiff, United Kingdom |
|
An hybrid finite element method for the modeling of micro-inductors11th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2004), Jun 2004, Séoul, South Korea |
|
Design, Modeling and Measurements of Tunable MEMS inductorsThe international symposium on design, Test, Integration and packaging of MEMS/MOEMS, May 2004, Montreux– Switzerland, Switzerland |
|
Deposit characterization by eddy current nondestructive evaluationThe International Symposium on Applied Electromagnetics and Mechanics, May 2003, Versailles, France |
|
3D Finite Element Modelling of micro-inductorsThe 14th Conference on the Computation of Electromagnetic Fields, Jul 2003, Saratoga Springs, United States |
|
Non-destructive evaluation of layered planar media using MLP and RBF neural networksThe 8th International Workshop on Electromagnetic Nondestructive Evaluation, Jun 2002, Saarbrucken, Germany |
|
Considerations of non-sinusoidal field distribution in a permanent magnet synchronous motor controlProceedings of 5th International Conference on Power Electronics and Variable-Speed Drives, Oct 1994, London, United Kingdom. pp.508-513, ⟨10.1049/cp:19941017⟩ |
|
|
Modelling and Design of a Mechatronic Actuator Chain Application to a Motorized TailgateDynamic Modelling, InTech, pp.15-28, 2010, ISBN 978-953-7619-68-8. ⟨10.5772/7093⟩ |