ERIC CHARKALUK

142
Documents

Publications

Publications

Wear behavior of 316L stainless steel obtained by additive manufacturing (laser metal deposition process)

Théo Zurcher , Eric Charkaluk , Vincent Fridrici
Wear, 2025, pp.205948. ⟨10.1016/j.wear.2025.205948⟩
Article dans une revue hal-04961616 v1
Image document

Investigating multi-scale heterogeneity in multi-layer additive friction stir deposition of high-strength aluminum alloys

Florian Girault , Louise Toualbi , Quentin Barres , Eric Charkaluk
Materials Science and Engineering: A, 2025, 927, pp.147979. ⟨10.1016/j.msea.2025.147979⟩
Article dans une revue hal-04952607 v1
Image document

Effect of the elevated temperature on the wear behavior of Laser Metal Deposition IN718 repairs

Théo Zurcher , Gaëtan Bouvard , Jean-Christophe Abry , Vincent Fridrici , Éric Charkaluk
Tribology International, 2024, 192, pp.109276. ⟨10.1016/j.triboint.2024.109276⟩
Article dans une revue hal-04404551 v1
Image document

Sliding wear resistance and residual stresses of parts repaired by laser metal deposition

Théo Zurcher , Itziar Serrano-Munoz , Tatiana Mishurova , Guilherme Abreu Faria , Sebastian Degener et al.
Journal of Materials Science, In press, ⟨10.1007/s10853-023-09129-4⟩
Article dans une revue hal-04330509 v1
Image document

Analysis and fast modelling of microstructures in duplex stainless steel formed by directed energy deposition additive manufacturing

Alexander Edwards , Daniel Weisz-Patrault , Eric Charkaluk
Additive Manufacturing, In press, 61, pp.103300. ⟨10.1016/j.addma.2022.103300⟩
Article dans une revue hal-03887899 v1
Image document

Multiphysics simulation of electric motors with an application to stators

N. Hanappier , Eric Charkaluk , N. Triantafyllidis
International Journal of Solids and Structures, 2022, 253, pp.111406. ⟨10.1016/j.ijsolstr.2021.111406⟩
Article dans une revue hal-04321641 v1
Image document

Coupling of X‐ray computed tomography and surface in situ analysis combined with digital image correlation method to study low cycle fatigue damage micromechanisms in lost foam casting A319 alloy

Long Wang , Nathalie Limodin , Ahmed El Bartali , Eric Charkaluk
Fatigue and Fracture of Engineering Materials and Structures, 2021, 44 (4), pp.916-932. ⟨10.1111/ffe.13402⟩
Article dans une revue hal-03157246 v1

A coupled electromagnetic–thermomechanical approach for the modeling of electric motors

N. Hanappier , E. Charkaluk , N. Triantafyllidis
Journal of the Mechanics and Physics of Solids, 2021, 149, pp.104315. ⟨10.1016/j.jmps.2021.104315⟩
Article dans une revue hal-03454928 v1
Image document

Crushing of additively manufactured thin-walled metallic lattices: Two-scale strain localization analysis

Yanis Balit , Pierre Margerit , Eric Charkaluk , Andrei Constantinescu
Mechanics of Materials, 2021, 160, pp.103915. ⟨10.1016/j.mechmat.2021.103915⟩
Article dans une revue hal-03873524 v1
Image document

Digital image correlation for microstructural analysis of deformation pattern in additively manufactured 316L thin walls

Yanis Balit , Eric Charkaluk , Andrei Constantinescu
Additive Manufacturing, 2020, 31, pp.100862. ⟨10.1016/j.addma.2019.100862⟩
Article dans une revue hal-02409832 v1
Image document

High resolution digital image correlation for microstructural strain analysis of a stainless steel repaired by Directed Energy Deposition

Yanis Balit , Camille Guévenoux , Alexandre Tanguy , Manas V Upadhyay , Eric Charkaluk et al.
Materials Letters, In press, 270, pp.127632. ⟨10.1016/j.matlet.2020.127632⟩
Article dans une revue hal-02503766 v1
Image document

Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components

Camille Guévenoux , Simon Hallais , Alexandre Charles , Eric Charkaluk , Andrei Constantinescu
Optics and Laser Technology, 2020, 128, pp.106218. ⟨10.1016/j.optlastec.2020.106218⟩
Article dans une revue hal-02517596 v1
Image document

Self-heating behavior during cyclic loadings of 316L stainless steel specimens manufactured or repaired by Directed Energy Deposition

Yanis Balit , Louis-Romain Joly , Fabien Szmytka , Sylvain Durbecq , Eric Charkaluk et al.
Materials Science and Engineering: A, 2020, 786, pp.139476. ⟨10.1016/j.msea.2020.139476⟩
Article dans une revue hal-02563296 v1
Image document

Application of Synchrotron Radiation–Computed Tomography In-Situ Observations and Digital Volume Correlation to Study Low-Cycle Fatigue Damage Micromechanisms in Lost Foam Casting A319 Alloy

Long Wang , N. Limodin , Ahmed El Bartali , Jean-Francois Witz , Jean-Yves Buffiere et al.
Metallurgical and Materials Transactions A, 2020, 51 (8), pp.3843-3857. ⟨10.1007/s11661-020-05839-5⟩
Article dans une revue hal-02891999 v1
Image document

Plastic strain localization induced by microstructural gradient in laser cladding repaired structures

Camille Guévenoux , Simon Hallais , Yanis Balit , Alexandre Charles , Eric Charkaluk et al.
Theoretical and Applied Fracture Mechanics, 2020, 107, pp.102520. ⟨10.1016/j.tafmec.2020.102520⟩
Article dans une revue hal-02509924 v1
Image document

Plastic zone evolution during fatigue crack growth: Digital image correlation coupled with finite elements method

Jérôme Hosdez , Mederic Langlois , J-F Witz , N. Limodin , D. Najjar et al.
International Journal of Solids and Structures, 2019, 171, pp.92-102. ⟨10.1016/j.ijsolstr.2019.04.032⟩
Article dans une revue hal-02309146 v1
Image document

Fatigue crack growth in compacted and spheroidal graphite cast irons

Jérôme Hosdez , N. Limodin , Denis Najjar , Jean-François Witz , E. Charkaluk et al.
International Journal of Fatigue, 2019, pp.105319. ⟨10.1016/j.ijfatigue.2019.105319⟩
Article dans une revue hal-02311920 v1
Image document

Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)

Victor Chastand , Philippe Quaegebeur , Wilson Maia , Eric Charkaluk
Materials Characterization, 2018, 143, pp.76-81. ⟨10.1016/j.matchar.2018.03.028⟩
Article dans une revue hal-01828928 v1

Fatigue of Additive Manufacturing Specimens: A Comparison with Casting Processes

Eric Charkaluk , Victor Chastand
Proceedings, 2018, 2 (8), ⟨10.3390/ICEM18-05352⟩
Article dans une revue hal-01829530 v1
Image document

Fatigue crack growth law identification by Digital Image Correlation and electrical potential method for ductile cast iron

Jerome Hosdez , Jean-François Witz , Corentin Martel , N. Limodin , Denis Najjar et al.
Engineering Fracture Mechanics, 2017
Article dans une revue hal-01665676 v1
Image document

Quantitative calorimetric analysis of the fretting damage: Construction of the elastic shakedown boundary

Abdel-Rahman Moustafa , Bruno Berthel , Siegfried Fouvry , Eric Charkaluk
International Journal of Fatigue, 2017, 95, pp.143-155. ⟨10.1016/j.ijfatigue.2016.10.018⟩
Article dans une revue hal-01522935 v1

Influence of the Casting Process in High Temperature Fatigue of A319 Aluminium Alloy Investigated By In-Situ X- Ray Tomography and Digital Volume Correlation

Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-François Witz , Rian Seghir et al.
Procedia Structural Integrity, 2016, 2, pp.3057-3064. ⟨10.1016/j.prostr.2016.06.382⟩
Article dans une revue hal-01612309 v1
Image document

In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography

Sébastien Dezecot , Jean-Yves Buffiere , Alain Köster , Vincent Maurel , Fabien Szmytka et al.
Scripta Materialia, 2016, 113, pp.254-258. ⟨10.1016/j.scriptamat.2015.11.017⟩
Article dans une revue hal-01255815 v1
Image document

Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis

Long Wang , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir et al.
Materials Science and Engineering, 2016, 673, pp.362-372. ⟨10.1016/j.msea.2016.07.036⟩
Article dans une revue hal-01433827 v1
Image document

Lifetime prediction methodology for variable fretting fatigue loading: Plasticity effect

Camille Gandiolle , Siegfried Fouvry , Éric Charkaluk
International Journal of Fatigue, 2016, 92 (2), pp.531-547. ⟨10.1016/j.ijfatigue.2016.05.025⟩
Article dans une revue hal-01383178 v1
Image document

Numerical investigation of fatigue strength of grain size gradient materials under heterogeneous stress states in a notched specimen

Pierre Baudoin , Vincent Magnier , Ahmed El Bartali , Jean-François Witz , Philippe Dufrenoy et al.
International Journal of Fatigue, 2016, 87, pp.132-142. ⟨10.1016/j.ijfatigue.2016.01.022⟩
Article dans une revue hal-01279003 v1
Image document

Damage Investigation in A319 Aluminium Alloy by X-ray Tomography and Digital Volume Correlation during In Situ High-Temperature Fatigue Tests

Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir et al.
Strain, 2016, 52 (4), pp.324-335. ⟨10.1111/str.12193⟩
Article dans une revue hal-01419328 v1
Image document

A Dedicated DIC Methodology for Characterizing Plastic Deformation in Single Crystals

Xiaogang Wang , Jean-François Witz , Ahmed El Bartali , Abdelali Oudriss , Rian Seghir et al.
Experimental Mechanics, 2016, 56 (7), pp.1155-1167. ⟨10.1007/s11340-016-0159-9⟩
Article dans une revue hal-01358974 v1
Image document

Influence of process-induced microstructure on hardness of two Al-Si alloys

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Gildas Guillemot , Fabien Szmytka
Materials Science and Engineering: A, 2015, 646, pp.190-200. ⟨10.1016/j.msea.2015.08.051⟩
Article dans une revue hal-01253000 v1
Image document

Experimental study of the stress gradient effect under fretting loading by full field measurement techniques

A.R. Moustafa , Bruno Berthel , Siegfried Fouvry , Eric Charkaluk
Wear, 2015, 330-331, pp.160-169. ⟨10.1016/j.wear.2014.12.007⟩
Article dans une revue hal-01200736 v1
Image document

Microplasticity in Polycrystals: A Thermomechanical Experimental Perspective

Eric Charkaluk , Rian Seghir , Laurence Bodelot , Jean-Francois Witz , Philippe Dufrenoy
Experimental Mechanics, 2015, 55 (4), pp.741-752. ⟨10.1007/s11340-014-9921-z⟩
Article dans une revue hal-01235785 v1

Bipotential versus return mapping algorithms: Implementation of non associated flow rules

Vincent Magnier , Eric Charkaluk , Géry de Saxcé
International Journal of Solids and Structures, 2014, 51 (15-16), pp.2857-2864. ⟨10.1016/j.ijsolstr.2014.04.004⟩
Article dans une revue hal-00998481 v1
Image document

Macroscopic yield criteria for ductile materials containing spheroidal voids: An Eshelby-like velocity fields approach

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Mechanics of Materials, 2014, 72, pp.1-18. ⟨10.1016/j.mechmat.2013.05.006⟩
Article dans une revue hal-00955545 v1
Image document

Probability density functions: From porosities to fatigue lifetime

Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Shadan Tabibian
International Journal of Fatigue, 2014, 63, pp.127-136. ⟨10.1016/j.ijfatigue.2014.01.017⟩
Article dans une revue hal-00961217 v1
Image document

Development of a Numerical Chain to Optimize Railway Axles with Respect to Fatigue Damage

Sofiane Saad , Vincent Magnier , Philippe Dufrenoy , Eric Charkaluk , François Demilly
Key Engineering Materials, 2014, 611-612, pp.1683-1693. ⟨10.4028/www.scientific.net/KEM.611-612.1683⟩
Article dans une revue hal-00998495 v1
Image document

Crack nucleation threshold under fretting loading by a thermal method

Bruno Berthel , Abdel-Rahman Moustafa , Eric Charkaluk , Siegfried Fouvry
Tribology International, 2014, 76, pp.35-44. ⟨10.1016/j.triboint.2013.10.008⟩
Article dans une revue hal-01524153 v1
Image document

Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

N. Limodin , Ahmed El Bartali , Long Wang , J. Lachambre , Jean-Yves Buffiere et al.
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014, 324, pp.57-62. ⟨10.1016/j.nimb.2013.07.034⟩
Article dans une revue hal-00955455 v1
Image document

An improved Lagrangian thermography procedure for the quantification of the temperature fields within polycrystals

Rian Seghir , Jean-Francois Witz , Laurence Bodelot , Eric Charkaluk , Philippe Dufrenoy
Quantitative InfraRed Thermography Journal, 2013, 10 (1), pp.74-95. ⟨10.1080/17686733.2013.785207⟩
Article dans une revue hal-00871131 v1

On the influence of microstructural gradients in the fatigue lifetime estimation of a railway axle

Pierre Baudoin , Vincent Magnier , Ahmed El Bartali , François Witz , Philippe Dufrenoy et al.
MATEC Web of Conferences, 2013, 7, ⟨10.1051/matecconf/20130701007⟩
Article dans une revue hal-01625249 v1
Image document

Effects of sliding on rolling contact fatigue of railway wheels

Amavi Langueh , Jean-François Brunel , Eric Charkaluk , Philippe Dufrenoy , Jean-Bernard Tritsch et al.
Fatigue and Fracture of Engineering Materials and Structures, 2013, 36 (6), pp.515-525. ⟨10.1111/ffe.12020⟩
Article dans une revue hal-00863592 v1

Improvement of thermomechanical full-field analysis of metallic polycrystals using crystallographic data

Rian Seghir , Jean-Francois Witz , Eric Charkaluk , Philippe Dufrenoy
Mechanics & Industry, 2013, 13 (6), pp.395-403. ⟨10.1051/meca/2012035⟩
Article dans une revue hal-00863628 v1
Image document

Numerical and experimental estimation of thermomechanical fields heterogeneity at the grain scale of 316L stainless steel

Rian Seghir , Laurence Bodelot , Eric Charkaluk , Philippe Dufrenoy
Computational Materials Science, 2012, 53 (1), pp.464-473. ⟨10.1016/j.commatsci.2011.08.036⟩
Article dans une revue hal-00636682 v1
Image document

TMF criteria for Lost Foam Casting aluminum alloys

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Alexis Oudin
Fatigue and Fracture of Engineering Materials and Structures, 2012, ⟨10.1111/ffe.12006q⟩
Article dans une revue hal-00757317 v1
Image document

TMF-LCF life assessment of a Lost Foam Casting A319 aluminum alloy

Shadan Tabibian , Eric Charkaluk , Andrei Constantinescu , Fabien Szmytka , Alexis Oudin
International Journal of Fatigue, 2012, ⟨10.1016/j.ijfatigue.2012.01.012⟩
Article dans une revue istex hal-00757313 v1
Image document

Anisotropy effects on the tensile and fatigue behaviour of an oxide dispersion strengthened copper alloy

Abderrazak Daoud , Jean-Bernard Vogt , Eric Charkaluk , Jérémie Bouquerel , Lin Zhang et al.
Materials Science and Engineering: A, 2012, 534, pp.640-648. ⟨10.1016/j.msea.2011.12.021⟩
Article dans une revue hal-00669670 v1
Image document

Digital image correlation of metal nanofilms on SU-8 for flexible electronics and MEMS

Thierry Roland , S. Arscott , Laurent Sabatier , Lionel Buchaillot , Eric Charkaluk
Journal of Micromechanics and Microengineering, 2011, 21 (12), pp.125005. ⟨10.1088/0960-1317/21/12/125005⟩
Article dans une revue istex hal-00740993 v1
Image document

Experimental study of heterogeneities in strain and temperature fields at the microstructural level of polycrystalline metals through fully-coupled full-field measurements by Digital Image Correlation and Infrared Thermography

Laurence Bodelot , Eric Charkaluk , Laurent Sabatier , Philippe Dufrenoy
Mechanics of Materials, 2011, 43 (11), pp.654-670. ⟨10.1016/j.mechmat.2011.08.006⟩
Article dans une revue hal-00626385 v1
Image document

Cyclic mechanical behavior of Sn3.0Ag0.5Cu alloy under high temperature isothermal ageing

Benoit Dompierre , Véronique Aubin , Eric Charkaluk , Wilson Maia Filho , Michel Brizoux
Materials Science and Engineering: A, 2011, 528, pp.4812-4818. ⟨10.1016/j.msea.2011.03.001⟩
Article dans une revue istex hal-00631662 v1

Influence of the steel grades on rolling contact fatigue of railway wheels

Amavi Langueh , Jean-François Brunel , Eric Charkaluk , Philippe Dufrenoy , F. Demilly
Procedia Engineering, 2011, 10, pp.2633-2638. ⟨10.1016/j.proeng.2011.04.438⟩
Article dans une revue hal-00602413 v1
Image document

A Micromechanics-based modification of the Gurson criterion by using Eshelby-like velocity fields

Vincent Monchiet , E. Charkaluk , D. Kondo
European Journal of Mechanics - A/Solids, 2011, 30 (6), pp.940-949. ⟨10.1016/j.euromechsol.2011.05.008⟩
Article dans une revue hal-00687856 v1

Influence of thermal ageing on cyclic mechanical properties of SnAgCu alloys for microelectronic assemblies

Benoît Dompierre , Véronique Aubin , Eric Charkaluk , Wilson Carlos Maia Filho , Michel Brizoux
Procedia Engineering, 2010, 2 (1), pp.1477-1486. ⟨10.1016/j.proeng.2010.03.159⟩
Article dans une revue hal-00761224 v1
Image document

Thermal ageing induces drastic changes on mechanical and damage behavior of Sn3.0Ag0.5Cu alloy

Benoît Dompierre , W.C. Maia Filho , M. Brizoux , Véronique Aubin , Eric Charkaluk
Microelectronics Reliability, 2010, 50 (9-11), pp.1661-1665. ⟨10.1016/j.microrel.2010.07.125⟩
Article dans une revue istex hal-00517341 v1

Thermal ageing induces drastic changes on mechanical and damage behavior of Sn3.0Ag0.5Cu alloy

Benoît Dompierre , Wilson Carlos Maia Filho , Michel Brizoux , Véronique Aubin , Eric Charkaluk
Microelectronics Reliability, 2010, 50 (9-11), pp.1661-1665. ⟨10.1016/j.microrel.2010.07.125⟩
Article dans une revue istex hal-00761246 v1
Image document

Experimental Determination of Fully-Coupled Kinematical and Thermal Fields at the Scale of Grains Under Cyclic Loading

Laurence Bodelot , Laurent Sabatier , Eric Charkaluk , Philippe Dufrenoy
Advanced Engineering Materials, 2009, 11 (9), pp.723-726. ⟨10.1002/adem.200900035⟩
Article dans une revue istex hal-00424948 v1
Image document

Dissipative aspects in high cycle fatigue

Eric Charkaluk , Andrei Constantinescu
Mechanics of Materials, 2009, 41 (5), pp.483-494. ⟨10.1016/j.mechmat.2009.01.018⟩
Article dans une revue hal-00376738 v1
Image document

Experimental setup for fully coupled kinematic and thermal measurements at the microstructure scale of an AISI 316L steel

Laurence Bodelot , Laurent Sabatier , Eric Charkaluk , Philippe Dufrenoy
Materials Science and Engineering: A, 2009, 501 (1-2), pp.52-60. ⟨10.1016/j.msea.2008.09.053⟩
Article dans une revue hal-00367330 v1
Image document

A micromechanical explanation of the mean stress effect in high cycle fatigue

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Mechanics Research Communications, 2008, 35 (6), pp.383-391. ⟨10.1016/j.mechrescom.2008.03.004⟩
Article dans une revue hal-00333028 v1
Image document

Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids

Vincent Monchiet , Djimedo Kondo , Eric Charkaluk , Cazacu Oana
International Journal of Plasticity, 2008, 24 (7), pp.1158-1189. ⟨10.1016/j.ijplas.2007.08.008⟩
Article dans une revue istex hal-00687823 v1
Image document

An improvement of Gurson-type models of porous materials by using Eshelby-like trial velocity fields

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Comptes Rendus Mécanique, 2007, 335 (1), pp.32-41. ⟨10.1016/j.crme.2006.12.002⟩
Article dans une revue hal-00136688 v1

Un modèle micromécanique pour la nucléation de fissures en fatigue polycyclique

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Mechanics & Industry, 2007, 8, pp.537-543. ⟨10.1051/meca:2007077⟩
Article dans une revue hal-00264870 v1
Image document

Plasticity-damage based micromechanical modelling in high cycle fatigue

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Comptes Rendus Mécanique, 2006, 334 (2), pp.129-136. ⟨10.1016/j.crme.2005.12.002⟩
Article dans une revue hal-00021651 v1
Image document

Approximate yield criteria for anisotropic metals with prolate or oblate voids

Vincent Monchiet , Ion-Cosmin Gruescu , Eric Charkaluk , Djimedo Kondo
Comptes Rendus Mécanique, 2006, 334, pp.431-439. ⟨10.1016/j.crme.2006.06.001⟩
Article dans une revue hal-00090592 v1
Image document

Estimation of the mesoscopic thermoplastic dissipation in High-Cycle Fatigue

Eric Charkaluk , Andrei Constantinescu
Comptes Rendus Mécanique, 2006, 334, pp.373-379. ⟨10.1016/j.crme.2006.03.014⟩
Article dans une revue hal-00082152 v1
Image document

A computational approach to thermomechanical fatigue

Andrei Constantinescu , Eric Charkaluk , Guy Lederer , Laetitia Verger
International Journal of Fatigue, 2004, 26, pp.805-818. ⟨10.1016/j.ijfatigue.2004.01.006⟩
Article dans une revue hal-00022603 v1
Image document

Dissipation and fatigue damage

Eric Charkaluk , Andrei Constantinescu
Materials Testing, 2004, 46, pp.524-530. ⟨10.3139/120.100615⟩
Article dans une revue hal-00104249 v1
Image document

Thermomechanical design in the automotive industry

Jean-Jacques Thomas , Laetitia Verger , André Bignonnet , Eric Charkaluk
Fatigue and Fracture of Engineering Materials and Structures, 2004, 27, pp.887-895. ⟨10.1111/j.1460-2695.2004.00746.x⟩
Article dans une revue hal-00104247 v1

Dimensionnement à la fatigue thermomécanique de structures dans l'industrie automobile

Éric Charkaluk , André Bignonnet , Jean-Jacques Thomas
Mechanics & Industry, 2004, 5 (1), pp.27-40. ⟨10.1051/meca:2004004⟩
Article dans une revue hal-00138175 v1
Image document

Fatigue design of structures under thermomechanical loadings

Éric Charkaluk , André Bignonnet , Andreï Constantinescu , Ky Dang Van
Fatigue and Fracture of Engineering Materials and Structures, 2002, 25 (12), pp.1199-1206. ⟨10.1046/j.1460-2695.2002.00612.x⟩
Article dans une revue hal-00111365 v1
Image document

An energetic approach in thermomechanical fatigue for silicium molybden cast iron

E. Charkaluk , Andreï Constantinescu
Materials at High Temperatures, 2000, 17 (3), pp.373-380. ⟨10.1179/mht.2000.17.3.001⟩
Article dans une revue hal-00111305 v1
Image document

Microstructure mastering and fatigue behavior of duplex stainless steel obtained with laser powder bed fusion

Maxime Piras , Anis Hor , Eric Charkaluk
Material Forming, Apr 2024, Toulouse, France. pp.290-299, ⟨10.21741/9781644903131-33⟩
Communication dans un congrès hal-04843998 v1
Image document

L-PBF and DED processing of a Ni-based superalloy

M Thomas , Eric Charkaluk , Denis Solas , Fabien Szmytka , Didier Locq et al.
World PM2022 Congress & Exhibition, European Powder Metallurgy Association (EPMA), Oct 2022, Lyon, France
Communication dans un congrès hal-04089265 v1

A cyclic plasticity study by coupling Digital Image Correlation and Finite Elements methods

Jerome Hosdez , Médéric Langlois , Jean-Francois Witz , Nathalie Limodin , Denis Najjar et al.
Photomechanics 2018, Mar 2018, Toulouse, France
Communication dans un congrès hal-01807462 v1

Low Cycle Fatigue of a Lost Foam Cast Al-Si-Cu alloy: study of the damage mechanisms with X-ray tomography and Digital Volume Correlation

Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz et al.
Fatigue 2018, May 2018, Poitiers, France
Communication dans un congrès hal-01807449 v1
Image document

Application de la tomographie à rayons X à la caractérisation de la microstructure et des mécanismes d'endommagement d'un alliage AlSi7Cu3

Long Wang , Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz et al.
XIIe Colloque Rayons X et Matière, Nov 2017, Lille, France. pp.91
Communication dans un congrès hal-01736338 v1
Image document

PROBABILISTIC THERMOMECHANICAL FATIGUE CRITERIA FOR SPHEROIDAL GRAPHITE CAST-IRONS

Fabien Szmytka , E. Charkaluk , A. Constantinescu
Eighth International Conference on Low Cycle Fatigue (LCF8), Jun 2017, Dresden, Germany
Communication dans un congrès hal-01634001 v1
Image document

Développement d'une technique de couplage de Corrélation d'Images et de Méthode des Éléments Finis appliquée à la fissuration en fatigue

Jérôme Hosdez , Médéric Langlois , Jean-Francois Witz , Nathalie Limodin , Denis Najjar et al.
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Communication dans un congrès hal-01926335 v1
Image document

Influence du gradient de microstructure sur les propriétés thermomécaniques dans un rail du secteur ferroviaire

Emmanuel Berte , François Bari , Jean-François Witz , Ahmed El Bartali , Philippe Dufrénoy et al.
CFM 2017 - 23e Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465267 v1
Image document

Détermination d'une loi de propagation de fissure de fatigue et étude de la plasticité cyclique par Corrélation d'Images Numériques

Jérôme Hosdez , Jean-François Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk
CFM 2017 - 23ème Congrès Français de Mécanique, Association Française de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465617 v1
Image document

Amorçage et propagation de fissures de fatigue dans un alliage Al-Si A319 lors d'essais in situ de fatigue oligocyclique sous tomographie synchrotron

Ahmed El Bartali , Nora Dahdah , Wang Long , Nathalie Limodin , Jean-Francois Witz et al.
CFM 2017 - 23e Congrès Français de Mécanique, Aug 2017, Lille, France
Communication dans un congrès hal-03465721 v1
Image document

Characterisation of 3D damage mechanisms of a cast Al alloy during in‐situ high temperature low cycle fatigue tests using Synchrotron X‐ray tomography and digital volume correlation

Nora Dahdah , N Limodin , Ahmed El Bartali , Jean-Francois Witz , Eric Charkaluk et al.
3rd International Conference on Tomography of Materials and Structures (ICTMS 2017), Jun 2017, Lund, Sweden
Communication dans un congrès hal-01669924 v1
Image document

Isothermal low cycle fatigue of a lost foam cast Al-Si-Cu alloy: study of the damage mechanisms with synchrotron X-ray tomography and Digital Volume Correlation

Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz et al.
LCF8 Eighth International Conference on Low Cycle Fatigue, Jun 2017, Dresden, Germany. pp.41
Communication dans un congrès hal-01617612 v1

Experimental investigation of kinematic and thermal localizations of perforated plate under plastic deformations

L Li , C Martel , Ahmed El Bartali , Jean-Francois Witz , Eric Charkaluk
The 13th Quantitative InfraRed Thermography Conference (QIRT 2016), Aug 2016, Gdansk, Poland
Communication dans un congrès hal-01770119 v1

Elasto-Plastic Parameter Identification in a Recrystallized Iron Specimen of Heterogeneous Grain Size

Pierre Baudoin , Vincent Magnier , Jean-Francois Witz , Ahmed El Bartali , Philippe Dufrenoy et al.
67th Japanese Joint Conference for the Technology of Plasticity. October 21 – 23, 2016, Saitama, Oct 2016, Saitama, Japan
Communication dans un congrès hal-01769482 v1

Determination of a fatigue crack growth law and the influence of the local plasticity by using Digital Image Correlation

Jerome Hosdez , Jean-Francois Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk
21st European Conference on Fracture, ECF21, Jun 2016, Catania, Italy
Communication dans un congrès hal-01736330 v1

Multiscale finite element model to predict microstructural changes induced by wheel-rail rolling contact fatigue

Loïc Saint-Aime , Philippe Dufrenoy , Eric Charkaluk
International Conference on Fatigue Damage of Structural Materials XI, Sep 2016, Hyannis, United States
Communication dans un congrès hal-01769474 v1
Image document

Caractérisation du comportement mécanique d'un gradient de microstructure

Pierre Baudoin , Vincent Magnier , Ahmed El Bartali , Jean-François Witz , Dufrénoy Philippe et al.
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444942 v1
Image document

Détermination d'une loi de propagation de fissure de fatigue par corrélation d'images numériques

Jerome Hosdez , Jean-François Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk
CFM 2015 - 22ème Congrès Français de Mécanique, Association Française de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03445013 v1

Influence of the casting microstructure on LCF damage mechanisms in an Al-Si alloy using X-ray tomography

Ahmed El Bartali , Long Wang , Nora Dahdah , Nathalie Limodin , Jean-Francois Witz et al.
26th Colloquium on Fatigue mechanisms, Mar 2015, Brno, Czech Republic
Communication dans un congrès hal-01736324 v1

Numerical Chain of Forging Railway Axle and Wheel Press Fitting Operation

Sofiane Saad , Vincent Magnier , Philippe Dufrenoy , Eric Charkaluk , François Demilly
Sixth International Congress on Design and Modeling of Mechanical Systems, CMSM’2015, 2015, Hammamet, Tunisia
Communication dans un congrès hal-01769012 v1
Image document

Study of damage mechanisms in A319 aluminium alloy by X-ray tomography and Digital Volume Correlation

Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir et al.
Photomechanics, May 2015, Delft, Netherlands
Communication dans un congrès hal-01729131 v1
Image document

In situ fatigue tests under X-ray tomography: damage mechanisms in a cast Aluminium Silicon alloy

Nathalie Limodin , Long Wang , Nora Dahdah , Ahmed El Bartali , Jean-Francois Witz et al.
9th European Solid Mechanics Conference (ESMC 2015), Jul 2015, Leganes-Madrid, Spain. pp.676
Communication dans un congrès hal-01736327 v1

Numerical and experimental investigation of Lüders bands propagation

Pierre Baudoin , Matthieu Mazière , Jean-Francois Witz , Vincent Magnier , Ahmed El Bartali et al.
25th International Workshop on Computational Mechanics of Materials (IWCMM 25), Oct 2015, Bochum, Germany
Communication dans un congrès hal-01771050 v1

Elasto-plastic parameters identification trough Finite Element Model Updating

Pierre Baudoin , Jean-Francois Witz , Vincent Magnier , Ahmed El Bartali , Philippe Dufrenoy et al.
11th World Congress on Computational Mechanics (WCCM XI), Jul 2014, barcelona, Spain
Communication dans un congrès hal-01771055 v1

The out-of-plane deformation in pure aluminium oligocrystal and its influence on thermographic measurement

X.G Wang , Jean-Francois Witz , Ahmed El Bartali , Philippe Dufrenoy , E. Charkaluk
The 12th international conference on the Quantitative InfraRed Thermography (QIRT 2014), Jul 2014, bordeaux, France
Communication dans un congrès hal-01771104 v1
Image document

Influence of the Casting Microstructure upon the Tensile Behaviour in A319 Al‐Si Alloy Investigated by X‐Ray Tomography and Digital Volume Correlation

Long Wang , Nathalie Limodin , Ahmed El Bartali , Julien Réthoré , Jean‐françois Witz et al.
Second International Congress on 3D Materials Science, 2014, Annecy, France. pp.73-78, ⟨10.1007/978-3-319-48123-4_12⟩
Communication dans un congrès hal-01668787 v1

Probabilistic thermal-mechanical fatigue criterion for lost foam casting aluminium alloys based on 2D/3D porosities distribution

F. Szmytka , N. Limodin , L. Wang , P. Osmond , J. Adrien et al.
FDMD II - JIP 2014 - Fatigue Design & Material Defects, Jun 2014, Paris, France. ⟨10.1051/matecconf/20141205005⟩
Communication dans un congrès hal-01612327 v1

Cyclic plasticity in duplex stainless steel

Rian Seghir , Ahmed El Bartali , Jean-Francois Witz , Philippe Dufrenoy , Eric Charkaluk
In Fatigue 2014, Mar 2014, Melbourne, Australia
Communication dans un congrès hal-01768660 v1

Coupling of experimental measurements to study the influence of microscopic defects on the fatigue damage in A319 Al-Si alloy

Long Wang , Nathalie Limodin , Ahmed El Bartali , Eric Charkaluk , Jean-Yves Buffiere
FDMD II - JIP 2014 - Fatigue Design & Material Defects, Jun 2014, Paris, France. ⟨10.1051/matecconf/20141204012⟩
Communication dans un congrès hal-01612313 v1
Image document

Influence of the Lost Foam Casting Microstructure on Low Cycle Fatigue Damage of A319 Aluminum Alloy

Nora Dahdah , Nathalie Limodin , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir et al.
The 2nd International Congress on 3D Materials Science, Jun 2014, Annecy, France. pp.97-102, ⟨10.1007/978-3-319-48123-4_16⟩
Communication dans un congrès hal-01668786 v1

Investigation of the work hardening stages of nickel single crystals from full-field strain measurements

X.G Wang , Abdelali Oudriss , Ahmed El Bartali , Jean-Francois Witz , Rian Seghir et al.
Plasticité 2014, Apr 2014, Lyon, France
Communication dans un congrès hal-01770051 v1

Effects of residual stresses on rolling contact fatigue of railway wheels

Amavi Langueh , Jean-François Brunel , Eric Charkaluk , Philippe Dufrenoy , François Demilly
In Fatigue Design 2013, Nov 2013, Senlis, France
Communication dans un congrès hal-01768665 v1

Microstructural strain heterogeneities during low cycle fatigue

Ahmed El Bartali , Nathalie Limodin , Long Wang , Eric Charkaluk
LCF7, 7th International Conference on Low Cycle Fatigue, Sep 2013, Aachen, Germany
Communication dans un congrès hal-01736267 v1
Image document

Détermination par analyse thermique des seuils d'amorçage des fissures sous chargement de Fretting

Abdel Moustafa , Bruno Berthel , Siegfried Fouvry , E. Charkaluk
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03440635 v1
Image document

Investigation of grain-scale surface deformation of a pure aluminum polycrystal through kinematic-thermal full-field coupling measurement

Xiaogang Wang , Jean-Francois Witz , Ahmed El Bartali , Philippe Dufrenoy , Eric Charkaluk
13th International Conference on Fracture (ICF13), Jun 2013, Pékin, China
Communication dans un congrès hal-01771063 v1
Image document

Multi-scale investigation of various gradient effects in fatigue

Pierre Baudoin , Vincent Magnier , Ahmed El Bartali , Jean-François Witz , Philippe Dufrénoy et al.
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717845 v1
Image document

Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

Nathalie Limodin , Ahmed El Bartali , Long Wang , J. Lachambre , Eric Charkaluk
1st international conference on tomography of materials and structures; ICTMS 2013, Jul 2013, Ghent, Belgium
Communication dans un congrès hal-01736294 v1

Specimen design for the fatigue lifetime evaluation of a forged material

Pierre Baudoin , Vincent Magnier , Ahmed El Bartali , Jean-Francois Witz , Philippe Dufrenoy et al.
13es Journées Internationales de Primptemps (JIP2013), May 2013, Paris, France
Communication dans un congrès hal-01771085 v1

Thermomechanical determination of the CRSS in a polycristal

Rian Seghir , X.G Wang , Ahmed El Bartali , Eric Charkaluk , Jean-Francois Witz et al.
Photomechanics2013, May 2013, montpellier, France
Communication dans un congrès hal-01771079 v1
Image document

Apport de la texture dans l'analyse des champs thermomécaniques polycristallins

Rian Seghir , Jean-Fançois Witz , Eric Charkaluk , Philippe Dufrenoy
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592819 v1

Critères de type Gurson généralisés pour les milieux poreux

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-00736824 v1
Image document

Approche expérimentale multi-échelle de la fatigue polycyclique d'un acier monophasé

Laurence Bodelot , Laurent Sabatier , Eric Charkaluk , Philippe Dufrenoy
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès hal-01493721 v1
Image document

Un critère macroscopique approché pour les milieux plastiques anisotropes contenant des cavités sphéroïdales

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03361122 v1
Image document

Approche multiéchelle de la fatigue polycyclique prenant en compte un couplage plasticité-endommagement

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03362557 v1

A multiscale approach of high cycle fatigue of metals including plasticity and microvoids growth

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Mesomechanics, Jul 2006, Porto, Portugal
Communication dans un congrès hal-00736808 v1

A micromechanical model for high cycle fatigue incorporating plasticity and damage mechanisms

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
6th European Solid Mechanics Conference, Aug 2006, Budapest, Hungary
Communication dans un congrès hal-00736809 v1

A micromechanical approach in high cycle fatigue

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
9th International Fatigue Congress, May 2006, Atlanta, United States
Communication dans un congrès hal-00736812 v1

Approche multiéchelle du couplage plasticité-endommagement

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
Colloque National Annuel Mecamat, Jan 2006, Aussois, France
Communication dans un congrès hal-00736819 v1

A micromechanical model for crack initiation in high cycle fatigue for metallic materials

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
16th European Conference on Fracture, Jul 2006, Alexandropoulis, Greece
Communication dans un congrès hal-00736807 v1
Image document

Approche micromécanique en fatigue polycyclique

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
17e Congrès Français de Mécanique, Aug 2005, Troyes, France
Communication dans un congrès hal-04203518 v1
Image document

Numerical approach in thermomechanical fatigue

Eric Charkaluk , Andrei Constantinescu , Jean-Jacques Thomas
11th International Conference on Fracture (ICF11), 2005, Turin, Italy
Communication dans un congrès hal-04052536 v1

Analyse de bifurcation et de stabilité dans les milieux poroélastiques endommageables saturés

Vincent Monchiet , Eric Charkaluk , Djimedo Kondo
17ème Congrès Français de Mécanique (CFM), Aug 2005, Troyes, France
Communication dans un congrès hal-00736817 v1

Dissipation and Fatigue Damage

Eric Charkaluk , Andrei Constantinescu
5th International Conference on Low Cycle Fatigue and the Elasto-Plastic Behaviour of Material, 2003, Berlin, Germany. pp.524-530, ⟨10.3139/120.100615⟩
Communication dans un congrès hal-00117689 v1

A macroscopic crack initiation criterion in multiaxial thermomechanical fatigue

Laetitia Verger , Eric Charkaluk , Andrei Constantinescu
Colloque Plasticité, 2001, Paris, France. pp.867-874
Communication dans un congrès hal-00116183 v1

Life-time prediction of aluminum automotive components under thermo-mechanical cyclic loadings

Laetitia Verger , Eric Charkaluk , Andrei Constantinescu
Temperature Fatigue Interaction (SF2M Ninth International Spring Meeting), 2001, Chicago, United States
Communication dans un congrès hal-00117741 v1
Image document

On the simulation of large viscoplastic structures under anisothermal cyclic loadings

Laetitia Verger , Andrei Constantinescu , Eric Charkaluk
IUTAM Symposium on Creep in Structures, Apr 2000, Nagoya, Japan. pp.341-350, ⟨10.1007/978-94-015-9628-2_33⟩
Communication dans un congrès hal-00116226 v1
Image document

Numerical lifetime assessment of engine parts submitted to thermomechanical fatigue

Guy Lederer , Eric Charkaluk , Laetitia Verger , Andrei Constantinescu
SAE 2000 World Congress, Mar 2000, Detroit, United States. ⟨10.4271/2000-01-0789⟩
Communication dans un congrès hal-00116123 v1

Énergie dissipée : un critère de dimensionnement à la fatigue thermomécanique

Eric Charkaluk , Andrei Constantinescu
14e Congrès Français de Mécanique, Aug 1999, Toulouse, France
Communication dans un congrès hal-00117834 v1

Dimensionnement des structures à la fatigue thermique

Eric Charkaluk , Andrei Constantinescu , André Bignonnet , Ky Dang Van
Dimensionnement en fatigue des Structures (SF2M, 18es Journées de printemps), 1999, Paris, France
Communication dans un congrès hal-00117854 v1

Lois de comportement viscoplastiques anisothermes pour calculs cycliques sur structures

Eric Charkaluk , Loick Verger , Andrei Constantinescu , Guy Lederer , Claude Stolz
18es journées sur le dimensionnement des structures, 1999, Paris, France. pp.575-580
Communication dans un congrès hal-00116547 v1
Image document

On a failure criterion for thermomechanical multiaxial low cycle fatigue and its industrial application

Eric Charkaluk , Andrei Constantinescu , André Bignonnet , Ky Dang Van
Fourth International Conference on Low Cycle Fatigure and Elasto-Plastic Behavior of Materials, Sep 1998, Garmisch-Partenkirchen, Germany. pp.815-820
Communication dans un congrès hal-00116524 v1
Image document

Shakedown within polycrystals: a direct numerical assessment

Domenico Magisano , Eric Charkaluk , Géry de Saxcé , Toufik Kanit
Advances in Direct Methods for Materials and Structures, 2018, ⟨10.1007/978-3-319-59810-9_3⟩
Chapitre d'ouvrage hal-01772204 v1

Determination of the Macroscopic Plastic Yield Behaviour of Microcracked Materials

Vincent Monchiet , E. Charkaluk , D. Kondo
Wiley. Particle and Continuum Aspects of Mesomechanics, ISTE, 2010, ⟨10.1002/9780470610794.ch81⟩
Chapitre d'ouvrage hal-04052552 v1

Determination of the Macroscopic Plastic Yield Behaviour of Microcracked Materials

Vincent Monchiet , E. Charkaluk , D. Kondo
Wiley. Particle and Continuum Aspects of Mesomechanics, 2010
Chapitre d'ouvrage hal-00734425 v1

La fatigue thermique

Eric Charkaluk , Luc Rémy
direction : C. Bathias, A. Pineau. Fatigue des matériaux et des structures.4, Hermès-Lavoisier, pp.301-370, 2009, Mécanique et ingénierie des matériaux
Chapitre d'ouvrage hal-00454528 v1

Determination of a fatigue crack growth law by using Digital Image Correlation

Jerome Hosdez , Jean-Francois Witz , Nathalie Limodin , Denis Najjar , Eric Charkaluk
34e journées de printemps de la SF2M, Microstructure - procédés - propriétés en fatigue, May 2015, Paris, France. 2015
Poster de conférence hal-01736342 v1