Farid ABED-MERAIM

Professeur des Universités à Arts et Métiers Sciences et Technologies
84%
Libre accès
240
Documents
Affiliations actuelles
  • Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3)
  • Laboratoire de physique et mécanique des matériaux (LPMM)
  • Laboratoire de Mécanique des Solides (LMS)
  • Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] (LaMCoS)
  • Laboratoire de Mécanique et Technologie (LMT)
  • Labex DAMAS
  • Arts et Métiers Sciences et Technologies
  • HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université (HESAM)
  • Arts et Métiers ParisTech
  • Arts et Metiers Institute of Technology
  • École Nationale Supérieure d'Arts et Métiers (ENSAM)
  • Ecole Nationale Supérieure d'Arts et Métiers - Centre de Metz (ENSAM - METZ)
  • École Nationale Supérieure d'Arts et Métiers (ENSAM)
Identifiants chercheurs
Contact

Présentation

Farid Abed-Meraim received his Ph.D. degree in theoretical and applied mechanics from École Polytechnique, Paris, in 1999. From 1999 to 2000, he held a Postdoctoral position at the LMT laboratory, Ecole Normale Supérieure de Cachan. He then joined Arts et Métiers Institute of Technology, Metz Campus, in 2000, where he works currently as a Professor at the LEM3 laboratory. From 2006 to 2008, he worked as a CNRS full-time Research Associate at the LaMCoS laboratory of INSA, Lyon. He also was a Visiting Professor at Eindhoven Technical University (Department of Mechanical Engineering) from 2010 to 2011. His main current research interests include structural stability (bifurcation) analysis of dissipative systems (elastoplastic, viscoelastic, and viscoplastic), material instability modeling in relation to the prediction of formability of metal sheets, and multiscale approaches (micromechanics, crystal plasticity, scale-transition schemes) as well as finite element technology (solid-shell formulations).

Domaines de recherche

Sciences de l'ingénieur [physics]

Compétences

Theoretical and Applied Mechanics Mechanics of Materials Computational Mechanics Stability & Bifurcation Multiscale Modeling Approaches Sheet Metal Formability

Publications

71
67
28
25
16
11
7
6
2
2
1
1
1
29
27
17
17
17
15
13
13
13
12
12
9
9
9
8
7
7
7
7
7
7
7
7
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
50
43
40
24
23
21
19
18
15
11
11
10
9
9
8
7
7
7
7
7
7
7
6
6
6
5
5
5
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
13
6
5
5
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
7
4
2
10
10
7
17
18
19
15
9
12
6
13
7
12
10
21
2
11
4
6
2
2
2
6
1
26
1
195
66
26
10
3
3
3
1

Publications

Image document

Buckling and post-buckling behavior of auxetic cellular structures

M. Belhadjamor , S. Belghith , M. Ben Bettaieb , S. Mezlini , F. Abed-Meraim
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025, 239 (4), pp.680-693. ⟨10.1177/14644207241305697⟩
Article dans une revue hal-04884732 v1
Image document

Investigation of non-Schmid effects in dual-phase steels using a dislocation density-based crystal plasticity model

Jianchang Zhu , Mohamed Ben Bettaieb , Zhenhuan Li , Farid Abed-Meraim , Minsheng Huang
Acta Mechanica Sinica, 2025, 41, pp.424445. ⟨10.1007/s10409-024-24445-x⟩
Article dans une revue hal-05002370 v1
Image document

A crystal plasticity-damage coupled finite element framework for predicting mechanical behavior and ductility limits of thin metal sheets

S. Zhou , Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Plasticity, 2025, 187, pp.104267. ⟨10.1016/j.ijplas.2025.104267⟩
Article dans une revue hal-04951653 v1
Image document

Investigation of the effect of morphological and crystallographic textures on the ductility limits of thin metal sheets using a CPFEM-based approach

Shuai Zhou , Mohamed Ben Bettaieb , Farid Abed-Meraim
European Journal of Mechanics - A/Solids, 2024, 106, pp.105293. ⟨10.1016/j.euromechsol.2024.105293⟩
Article dans une revue hal-04530397 v1
Image document

A physically-based mixed hardening model for the prediction of the ductility limits of thin metal sheets using a CPFE approach

Shuai Zhou , Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Plasticity, 2024, pp.103946. ⟨10.1016/j.ijplas.2024.103946⟩
Article dans une revue hal-04529845 v1
Image document

Development and implementation of a new computational strategy for the prediction of elastoplastic buckling

M. Bel Hadj Amor , Mohamed Ben Bettaieb , S. Mezlini , Farid Abed-Meraim
International Journal of Applied Mechanics, 2024, 16 (2450091), ⟨10.1142/S1758825124500911⟩
Article dans une revue hal-04679285 v1
Image document

Coupled effects of crystallographic orientation and void shape on ductile failure initiation using a CPFE framework

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim , M.S. Huang , Z.H. Li
Engineering Fracture Mechanics, 2023, 280, pp.109121. ⟨10.1016/j.engfracmech.2023.109121⟩
Article dans une revue hal-04057248 v1
Image document

On elastic gaps in strain gradient plasticity: 3D discrete dislocation dynamics investigation

Yaovi Armand Amouzou-Adoun , Mohamed Jebahi , Marc Fivel , Samuel Forest , Jean-Sébastien Lecomte et al.
Acta Materialia, 2023, 252, pp.118920. ⟨10.1016/j.actamat.2023.118920⟩
Article dans une revue hal-04072375 v1
Image document

Ductility limit prediction for polycrystalline aggregates using a CPFEM-based multiscale framework

Jianchang Zhu , Mohamed Ben Bettaieb , Shuai Zhou , Farid Abed-Meraim
International Journal of Plasticity, 2023, 167, pp.103671. ⟨10.1016/j.ijplas.2023.103671⟩
Article dans une revue hal-04148730 v1
Image document

Comparison between the Marciniak and Kuczyński imperfection approach and bifurcation theory in the prediction of localized necking for porous ductile materials

Muhammad Waqar Nasir , Hocine Chalal , Farid Abed-Meraim
International Journal of Advanced Manufacturing Technology, 2022, 119, pp.5047-5068. ⟨10.1007/s00170-021-08400-9⟩
Article dans une revue hal-03549429 v1
Image document

Strain Localization Modes within Single Crystals Using Finite Deformation Strain Gradient Crystal Plasticity

Lei Cai , Mohamed Jebahi , Farid Abed-Meraim
Crystals, 2021, 11 (10), pp.1235. ⟨10.3390/cryst11101235⟩
Article dans une revue hal-03439390 v1
Image document

Formability prediction using bifurcation criteria and GTN damage model

Muhammad Waqar Nasir , Hocine Chalal , Farid Abed-Meraim
International Journal of Mechanical Sciences, 2021, 191, pp.106083. ⟨10.1016/j.ijmecsci.2020.106083⟩
Article dans une revue hal-03225596 v1
Image document

Analyticity of solutions to thermo-elastic-plastic flow problem with microtemperatures

Moncef Aouadi , Mohamed Ben Bettaieb , Farid Abed-Meraim
Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2021, 33 p. ⟨10.1002/zamm.202000346⟩
Article dans une revue hal-03254877 v1
Image document

An advanced elastoplastic framework accounting for induced plastic anisotropy fully coupled with ductile damage

Joseph Paux , Mohamed Ben Bettaieb , Houssem Badreddine , Farid Abed-Meraim , Carl Labergere et al.
International Journal of Mechanical Sciences, 2021, 207, pp.106620. ⟨10.1016/j.ijmecsci.2021.106620⟩
Article dans une revue hal-03276459 v1
Image document

Formability prediction of substrate-supported metal layers using a non-associated plastic flow rule

Mohamed Ben Bettaieb , Farid Abed-Meraim
Journal of Materials Processing Technology, 2021, 287, pp.116694. ⟨10.1016/j.jmatprotec.2020.116694⟩
Article dans une revue hal-02923685 v1
Image document

Buckling and wrinkling of thin membranes by using a numerical solver based on multivariate Taylor series

Haitao Tian , Michel Potier-Ferry , Farid Abed-Meraim
International Journal of Solids and Structures, 2021, 230-231, pp.111165. ⟨10.1016/j.ijsolstr.2021.111165⟩
Article dans une revue hal-03297844 v1
Image document

Numerical investigation of necking in perforated sheets using the periodic homogenization approach

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Mechanical Sciences, 2020, 166, pp.105209. ⟨10.1016/j.ijmecsci.2019.105209⟩
Article dans une revue hal-02378946 v1
Image document

Comparative study of three techniques for the computation of the macroscopic tangent moduli by periodic homogenization scheme

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
Engineering with Computers, 2020, 30p. ⟨10.1007/s00366-020-01091-y⟩
Article dans une revue hal-02925996 v1
Image document

Investigation of the competition between void coalescence and macroscopic strain localization using the periodic homogenization multiscale scheme

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
Journal of the Mechanics and Physics of Solids, 2020, 143, pp.104042. ⟨10.1016/j.jmps.2020.104042⟩
Article dans une revue hal-02901420 v1
Image document

An elasto-plastic self-consistent model for damaged polycrystalline materials: Theoretical formulation and numerical implementation

J. Paux , Mohamed Ben Bettaieb , H. Badreddine , Farid Abed-Meraim , C. Labergere et al.
Computer Methods in Applied Mechanics and Engineering, 2020, 368, pp.113138. ⟨10.1016/j.cma.2020.113138⟩
Article dans une revue hal-02923712 v1
Image document

Finite element simulation of sheet metal forming processes using non-quadratic anisotropic plasticity models and solid-shell finite elements

Nabeel Younas , Hocine Chalal , Farid Abed-Meraim
Procedia Manufacturing, 2020, 47, pp.1416-1423. ⟨10.1016/j.promfg.2020.04.302⟩
Article dans une revue hal-03225616 v1
Image document

Prediction of forming limits for porous materials using void-size dependent model and bifurcation approach

Muhammad Waqar Nasir , Hocine Chalal , Farid Abed-Meraim
Meccanica, 2020, 55 (9), pp.1829-1845. ⟨10.1007/s11012-020-01222-1⟩
Article dans une revue hal-03048307 v1
Image document

Strain gradient crystal plasticity model based on generalized non-quadratic defect energy and uncoupled dissipation

Mohamed Jebahi , Lei Cai , Farid Abed-Meraim
International Journal of Plasticity, 2020, 126, pp.102617. ⟨10.1016/j.ijplas.2019.10.005⟩
Article dans une revue hal-02381385 v1
Image document

Prediction of necking in HCP sheet metals using a two-surface plasticity model

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Farid Abed-Meraim , Mohamed Taoufik Khabou , Anas Bouguecha et al.
International Journal of Plasticity, 2020, 128, pp.102641. ⟨10.1016/j.ijplas.2019.102641⟩
Article dans une revue hal-02517380 v1
Image document

Numerical investigation of the combined effects of curvature and normal stress on sheet metal formability

Mohamed Ben Bettaieb , Farid Abed-Meraim , Xavier Lemoine
International Journal of Material Forming, 2019, 12 (2), pp.211-221. ⟨10.1007/s12289-017-1382-3⟩
Article dans une revue hal-01797168 v1
Image document

Simulation of Structural Applications and Sheet Metal Forming Processes Based on Quadratic Solid–Shell Elements with Explicit Dynamic Formulation

Hocine Chalal , Farid Abed-Meraim
International Journal of Applied Mechanics, 2019, 11 (09), pp.1950082. ⟨10.1142/s1758825119500820⟩
Article dans une revue hal-03053942 v1
Image document

Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory

Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Material Forming, 2019, 12 (2), pp.241-255. ⟨10.1007/s12289-018-1401-z⟩
Article dans une revue hal-01794116 v1
Image document

Modeling of hybrid vibration control for multilayer structures using solid– shell finite elements

Fessal Kpeky , Farid Abed-Meraim , El Mostafa Daya , Ouro-Djobo Samah
Mechanics of Advanced Materials and Structures, 2018, 25 (12), pp.1033-1046. ⟨10.1080/15376494.2017.1365987⟩
Article dans une revue hal-02389896 v1
Image document

New linear and quadratic prismatic piezoelectric solid–shell finite elements

Fessal Kpeky , Farid Abed-Meraim , El Mostafa Daya
Applied Mathematics and Computation, 2018, 319, pp.355-368. ⟨10.1016/j.amc.2017.03.050⟩
Article dans une revue hal-02388830 v1
Image document

Computationally efficient predictions of crystal plasticity based forming limit diagrams using a spectral database

Akash Gupta , Mohamed Ben Bettaieb , Farid Abed-Meraim , Surya Kalidindi
International Journal of Plasticity, 2018, 103, pp.168-187. ⟨10.1016/j.ijplas.2018.01.007⟩
Article dans une revue hal-01794474 v1
Image document

Linear and quadratic solid–shell finite elements SHB8PSE and SHB20E for the modeling of piezoelectric sandwich structures

Fessal Kpeky , Farid Abed-Meraim , Hakim Boudaoud , El Mostafa Daya
Mechanics of Advanced Materials and Structures, 2018, 25 (7), pp.559-578. ⟨10.1080/15376494.2017.1285466⟩
Article dans une revue hal-02389489 v1
Image document

Influence of geometric and material parameters on the damping properties of multilayer structures

Fessal Kpeky , Komlan Akoussan , Farid Abed-Meraim , El Mostafa Daya
Composite Structures, 2018, 183 (1), pp.611-619. ⟨10.1016/j.compstruct.2017.07.036⟩
Article dans une revue hal-02388662 v1
Image document

Mathematical and numerical analysis in thermo-gradient-dependent theory of plasticity

Moncef Aouadi , Mohamed Ben Bettaieb , Farid Abed-Meraim
Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2018, 98 (9), pp.1603-1622. ⟨10.1002/zamm.201700131⟩
Article dans une revue hal-01879597 v1
Image document

Prediction of necking in thin sheet metals using an elastic‒plastic model coupled with ductile damage and bifurcation criteria

Yasser Bouktir , Hocine Chalal , Farid Abed-Meraim
International Journal of Damage Mechanics, 2018, 27 (6), pp.801-839. ⟨10.1177/1056789517704030⟩
Article dans une revue hal-02386492 v1
Image document

Strain localization analysis for planar polycrystals based on bifurcation theory

Mohamed Ben Bettaieb , Farid Abed-Meraim
Comptes Rendus. Mécanique, 2018, 346 (8), pp.647-664. ⟨10.1016/j.crme.2018.06.006⟩
Article dans une revue hal-01882210 v1
Image document

Influence of the Non-Schmid Effects on the Ductility Limit of Polycrystalline Sheet Metals

Mohamed Ben Bettaieb , Farid Abed-Meraim
Materials, 2018, 11 (8), pp.1386. ⟨10.3390/ma11081386⟩
Article dans une revue hal-01878692 v1
Image document

A numerical method based on Taylor series for bifurcation analyses within Föppl-von Karman plate theory

Haitao Tian , Michel Potier-Ferry , Farid Abed-Meraim
Mechanics Research Communications, 2018, 93, pp.154-158. ⟨10.1016/j.mechrescom.2017.12.006⟩
Article dans une revue hal-02386528 v1
Image document

Quadratic solid–shell finite elements for geometrically nonlinear analysis of functionally graded material plates

Hocine Chalal , Farid Abed-Meraim
Materials, 2018, 11 (6), pp.1046. ⟨10.3390/ma11061046⟩
Article dans une revue hal-02385859 v1
Image document

Quadratic solid‒shell elements for nonlinear structural analysis and sheet metal forming simulation

Peng Wang , Hocine Chalal , Farid Abed-Meraim
Computational Mechanics, 2017, 59 (1), pp.161-186. ⟨10.1007/s00466-016-1341-8⟩
Article dans une revue hal-02385962 v1
Image document

Investigation of the effect of temper rolling on the texture evolution and mechanical behavior of IF steels using multiscale simulation

Komi Soho , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
International Journal of Material Forming, 2017, 10 (1), pp.29-42. ⟨10.1007/s12289-015-1257-4⟩
Article dans une revue hal-02175178 v1
Image document

Numerical Predictions of the Occurrence of Necking in Deep Drawing Processes

Hocine Chalal , Farid Abed-Meraim
Metals, 2017, 7 (11), pp.455. ⟨10.3390/met7110455⟩
Article dans une revue hal-02386447 v1
Image document

Linear and Quadratic Solid-Shell Elements for Quasi-Static and Dynamic Simulations of Thin 3D Structures: Application to a Deep Drawing Process

Peng Wang , Hocine Chalal , Farid Abed-Meraim
Strojniški vestnik = Journal of Mechanical Engineering, 2017, 63 (1), pp.25-34. ⟨10.5545/sv-jme.2016.3526⟩
Article dans une revue hal-02386152 v1
Image document

Localized necking predictions based on rate-independent self-consistent polycrystal plasticity: Bifurcation analysis versus imperfection approach

Holanyo Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Plasticity, 2017, 91, pp.205-237. ⟨10.1016/j.ijplas.2017.02.001⟩
Article dans une revue hal-01541858 v1
Image document

Effect of kinematic hardening on localized necking in substrate-supported metal layers

Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Mechanical Sciences, 2017, 123, pp.177-197. ⟨10.1016/j.ijmecsci.2016.12.002⟩
Article dans une revue hal-01541500 v1
Image document

Quadratic prismatic and hexahedral solid‒shell elements for geometric nonlinear analysis of laminated composite structures

Peng Wang , Hocine Chalal , Farid Abed-Meraim
Composite Structures, 2017, 172, pp.282-296. ⟨10.1016/j.compstruct.2017.03.091⟩
Article dans une revue hal-02386368 v1
Image document

Determination of forming limit diagrams based on ductile damage models and necking criteria

Hocine Chalal , Farid Abed-Meraim
Latin American Journal of Solids and Structures, 2017, 14 (10), pp.1872-1892. ⟨10.1590/1679-78253481⟩
Article dans une revue hal-02385802 v1
Image document

Theoretical and numerical investigation of the impact of out-of-plane compressive stress on sheet metal formability

Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Mechanical Sciences, 2017, 130, pp.244-257. ⟨10.1016/j.ijmecsci.2017.05.046⟩
Article dans une revue hal-01544295 v1
Image document

Localized necking in elastomer-supported metal layers: impact of kinematic hardening

Mohamed Ben Bettaieb , Farid Abed-Meraim
Journal of Manufacturing Science and Engineering, 2017, 139 (6), pp.061008. ⟨10.1115/1.4035183⟩
Article dans une revue hal-01880369 v1
Image document

Prediction of Plastic Instability in Sheet Metals During Forming Processes Using the Loss of Ellipticity Approach

Holanyo Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
Latin American Journal of Solids and Structures, 2017, 14 (10), pp.1816-1836. ⟨10.1590/1679-78253544⟩
Article dans une revue hal-01558233 v1
Image document

Strain rate effects on localized necking in substrate-supported metal layers

Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Advanced Manufacturing Technology, 2017, 92 (9-12), pp.3461-3480. ⟨10.1007/s00170-017-0344-8⟩
Article dans une revue hal-01795314 v1
Image document

Explicit dynamic analysis of sheet metal forming processes using linear prismatic and hexahedral solid‒shell elements

Peng Wang , Hocine Chalal , Farid Abed-Meraim
Engineering Computations, 2017, 34 (5), pp.1413-1445. ⟨10.1108/EC-04-2016-0150⟩
Article dans une revue hal-02386217 v1
Image document

Influence of the Yield Surface Curvature on the Forming Limit Diagrams Predicted by Crystal Plasticity Theory

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
Latin American Journal of Solids and Structures, 2016, 13 (12), pp.2231-2250. ⟨10.1590/1679-78252456⟩
Article dans une revue hal-01366647 v1
Image document

Investigation of ductility limits based on bifurcation theory coupled with continuum damage mechanics

Yasser Bouktir , Hocine Chalal , Moussa Haddad , Farid Abed-Meraim
Materials & Design, 2016, 90, pp.969-978. ⟨10.1016/j.matdes.2015.11.052⟩
Article dans une revue hal-01515196 v1
Image document

Numerical integration of rate-independent BCC single crystal plasticity models: comparative study of two classes of numerical algorithms

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal for Numerical Methods in Engineering, 2016, 108 (5), pp.363-422. ⟨10.1002/nme.5215⟩
Article dans une revue hal-01292713 v1
Image document

Prediction of Localized Necking Based on Crystal Plasticity: Comparison of Bifurcation and Imperfection Approaches

Holanyo Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
Key Engineering Materials, 2016, 716, pp.779-789. ⟨10.4028/www.scientific.net/KEM.716.779⟩
Article dans une revue hal-01544493 v1
Image document

Combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets

Sabeur Msolli , Mohamed Ben Bettaieb , Farid Abed-Meraim
Procedia Structural Integrity, 2016, 2, pp.3577-3584. ⟨10.1016/j.prostr.2016.06.446⟩
Article dans une revue hal-01375783 v1
Image document

Efficient solid–shell finite elements for quasi-static and dynamic analyses and their application to sheet metal forming simulation

Peng Wang , Hocine Chalal , Farid Abed-Meraim
Key Engineering Materials, 2015, 651-653, pp.344-349. ⟨10.4028/www.scientific.net/KEM.651-653.344⟩
Article dans une revue hal-01198780 v1
Image document

Modeling of viscoelastic sandwich beams using solid-shell finite elements

Fessal Kpeky , Hakim Boudaoud , Farid Abed-Meraim , El Mostafa Daya
Composite Structures, 2015, 133, pp.105-116. ⟨10.1016/j.compstruct.2015.07.055⟩
Article dans une revue hal-01207115 v1
Image document

Hardening effects on strain localization predictions in porous ductile materials using the bifurcation approach

Hocine Chalal , Farid Abed-Meraim
Mechanics of Materials, 2015, 91 (P1), pp.152-166. ⟨10.1016/j.mechmat.2015.07.012⟩
Article dans une revue hal-01196421 v1
Image document

A comparative study of Forming Limit Diagrams predicted by two different plasticity theories involving vertex effects

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
Key Engineering Materials, 2015, 651-653, pp.21-26. ⟨10.4028/www.scientific.net/KEM.651-653.21⟩
Article dans une revue hal-01201833 v1
Image document

Investigation of localized necking in substrate-supported metal layers: comparison of bifurcation and imperfection analyses

Mohamed Ben Bettaieb , Farid Abed-Meraim
International Journal of Plasticity, 2015, 65, pp.168-190. ⟨10.1016/j.ijplas.2014.09.003⟩
Article dans une revue hal-01201806 v1
Image document

Effect of Microstructural and Morphological Parameters on the Formability of BCC Metal Sheets

Gérald Franz , Farid Abed-Meraim , Marcel Berveiller
steel research international, 2014, 85 (6), pp.980-987. ⟨10.1002/srin.201300166⟩
Article dans une revue hal-01503716 v1
Image document

Investigation and comparative analysis of plastic instability criteria: Application to forming limit diagrams

Farid Abed-Meraim , Tudor Balan , Guillaume Altmeyer
International Journal of Advanced Manufacturing Technology, 2014, 71 (5-8), pp.1247-1262. ⟨10.1007/s00170-013-5530-8⟩
Article dans une revue hal-01226823 v1
Image document

Bifurcation analysis versus maximum force criteria in formability limit assessment of stretched metal sheets

Farid Abed-Meraim , Ron H. J. Peerlings , Marc G.D. Geers
International Journal of Applied Mechanics, 2014, 6 (6), pp.1450064. ⟨10.1142/S1758825114500641⟩
Article dans une revue hal-01199864 v1
Image document

Multiscale finite element simulation of forming processes based on crystal plasticity

Komi Soho , Farid Abed-Meraim , Xavier Lemoine , Hamid Zahrouni
Key Engineering Materials, 2014, 611-612, pp.545-552. ⟨10.4028/www.scientific.net/KEM.611-612.545⟩
Article dans une revue hal-01215887 v1
Image document

Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis

Lotfi Mansouri , Hocine Chalal , Farid Abed-Meraim
Mechanics of Materials, 2014, 76, pp.64-92. ⟨10.1016/j.mechmat.2014.06.005⟩
Article dans une revue hal-01196426 v1
Image document

Effect of Microstructural and Physical Mechanisms on Mechanical Properties of Single-Phase Steels

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb
Advanced Science Letters, 2013, 19 (1), pp.346-350. ⟨10.1166/asl.2013.4710⟩
Article dans une revue hal-01427473 v1
Image document

Numerical investigation and experimental validation of a plasticity model for sheet steel forming

Tales Carvalho Resende , Tudor Balan , Salima Bouvier , Farid Abed-Meraim , Simon-Serge Sablin
Modelling and Simulation in Materials Science and Engineering, 2013, 21 (1), ⟨10.1088/0965-0393/21/1/015008⟩
Article dans une revue hal-01192809 v1
Image document

Impact of Intragranular Substructure Parameters on the Forming Limit Diagrams of Single-Phase B.C.C. Steels

Gérald Franz , Farid Abed-Meraim , Marcel Berveiller
Materials, 2013, 6 (11), pp.5217-5233. ⟨10.3390/ma6115217⟩
Article dans une revue hal-01502163 v1
Image document

Dislocation-based model for the prediction of the behavior of b.c.c. materials – grain size and strain path effects

Tales Carvalho Resende , Salima Bouvier , Farid Abed Meraim , Tudor Balan , Simon Serge Sablin
International Journal of Plasticity, 2013, 47, pp.29-48. ⟨10.1016/j.ijplas.2013.01.003⟩
Article dans une revue hal-01191889 v1
Image document

New quadratic solid-shell elements and their evaluation on linear benchmark problems

Farid Abed-Meraim , Vuong-Dieu Trinh , Alain Combescure
Computing, 2013, 95 (5), pp.373-394. ⟨10.1007/s00607-012-0265-1⟩
Article dans une revue hal-01206680 v1
Image document

Elasto-visco-plastic modeling of mild steels for sheet forming applications over a large range of strain rates

Jean-Marc Pipard , Tudor Balan , Farid Abed-Meraim , Xavier Lemoine
International Journal of Solids and Structures, 2013, 50 (16-17), pp.2691-2700. ⟨10.1016/j.ijsolstr.2013.04.022⟩
Article dans une revue hal-01192735 v1
Image document

Physically-motivated elasto-visco-plastic model for the large strain-rate behavior of steels

Jean-Marc Pipard , Tudor Balan , Farid Abed-Meraim , Xavier Lemoine
Key Engineering Materials, 2013, 554-557, pp.1164-1173. ⟨10.4028/www.scientific.net/KEM.554-557.1164⟩
Article dans une revue hal-01199757 v1
Image document

Strain localization analysis for single crystals and polycrystals: Towards microstructure-ductility linkage

Gérald Franz , Farid Abed-Meraim , Marcel Berveiller
International Journal of Plasticity, 2013, 48, pp.1-33. ⟨10.1016/j.ijplas.2013.02.001⟩
Article dans une revue hal-01081928 v1
Image document

Evaluation of a New Solid–Shell Finite Element on the Simulation of Sheet Metal Forming Processes

Hocine Chalal , Abdellah Salahouelhadj , Farid Abed-Meraim
Steel Research International, 2012, pp.315-318
Article dans une revue hal-05130054 v1
Image document

Plastic Instability Based on Bifurcation Analysis: Effect of Hardening and Gurson Damage Parameters on Strain Localization

Lotfi Mansouri , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
Key Engineering Materials, 2012, 504-506, pp.35-40. ⟨10.4028/www.scientific.net/KEM.504-506.35⟩
Article dans une revue hal-01200489 v1
Image document

Application of the continuum shell finite element SHB8PS to sheet forming simulation using an extended large strain anisotropic elastic-plastic formulation

Abdellah Salahouelhadj , Farid Abed-Meraim , Hocine Chalal , Tudor Balan
Archive of Applied Mechanics, 2012, 82 (9), pp.1269-1290. ⟨10.1007/s00419-012-0620-x⟩
Article dans une revue hal-00800281 v1
Image document

Assumed-strain solid-shell formulation for the six-node finite element SHB6: Evaluation on non-linear benchmark problems

Farid Abed-Meraim , Vuong-Dieu Trinh , Alain Combescure
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2012, 21 (1-2), pp.52-71. ⟨10.1080/17797179.2012.702430⟩
Article dans une revue hal-01205981 v1
Image document

Limit-point buckling analyses using solid, shell and solid–shell elements

Marc Killpack , Farid Abed-Meraim
Journal of Mechanical Science and Technology, 2011, 25 (5), pp.1105-1117. ⟨10.1007/s12206-011-0305-3⟩
Article dans une revue istex hal-01084140 v1
Image document

On the implementation of the continuum shell finite element SHB8PS and application to sheet forming simulation

Abdellah Salahouelhadj , Farid Abed-Meraim , Hocine Chalal , Tudor Balan
American Institute of Physics Conf. Proc., 2011, 1353, pp.1203-1208. ⟨10.1063/1.3589680⟩
Article dans une revue hal-01206468 v1
Image document

A new assumed strain solid-shell formulation "SHB6" for the six-node prismatic finite element

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
Journal of Mechanical Science and Technology, 2011, 25 (9), pp.2345-2364. ⟨10.1007/s12206-011-0710-7⟩
Article dans une revue hal-01206008 v1
Image document

New prismatic solid-shell element: Assumed strain formulation and hourglass mode analysis

Farid Abed-Meraim , Alain Combescure
Structural Engineering and Mechanics, 2011, 37 (2), pp.253-256. ⟨10.12989/sem.2011.37.2.253⟩
Article dans une revue hal-01206177 v1
Image document

Impact of intragranular microstructure development on ductility limits of multiphase steels

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
Materials Science and Engineering: A, 2011, 528 (10-11), pp.3777-3785. ⟨10.1016/j.msea.2011.01.042⟩
Article dans une revue hal-01203311 v1
Image document

A proposed set of popular limit-point buckling benchmark problems

Ion Leahu-Aluas , Farid Abed-Meraim
Structural Engineering and Mechanics, 2011, 38 (6), pp.767-802. ⟨10.12989/sem.2011.38.6.767⟩
Article dans une revue hal-01206153 v1
Image document

Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations

Tales Carvalho Resende , Tudor Balan , Farid Abed-Meraim , Salima Bouvier , Simon-Serge Sablin
American Institute of Physics Conf. Proc., 2010, 1252, pp.1339-1346. ⟨10.1063/1.3457539⟩
Article dans une revue hal-01206142 v1
Image document

Investigation of some localization criteria and their relevance to prediction of forming limit diagrams

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
Steel Research International, 2010, 81 (9), pp.1364-1367
Article dans une revue hal-02517269 v1
Image document

Formability prediction of thin metal sheets using various localization criteria

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
International Journal of Material Forming, 2009, 2 (1), pp.423-426. ⟨10.1007/s12289-009-0479-8⟩
Article dans une revue hal-00753380 v1
Image document

An improved assumed strain solid-shell element formulation with physical stabilization for geometric non-linear applications and elastic-plastic stability analysis

Farid Abed-Meraim , Alain Combescure
International Journal for Numerical Methods in Engineering, 2009, 80 (13), pp.1640-1686. ⟨10.1002/nme.2676⟩
Article dans une revue istex hal-01206312 v1
Image document

A new prismatic solid-shell element 'SHB6' : assumed-strain formulation and evaluation on benchmark problems

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
Vietnam Journal of Mechanics, 2009, 31 (3-4), pp.279-292
Article dans une revue hal-01206945 v1
Image document

Strain localization analysis using a multiscale model

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
Computational Materials Science, 2009, 45 (3), pp.768-773. ⟨10.1016/j.commatsci.2008.05.033⟩
Article dans une revue istex hal-01084136 v1
Image document

Role of intragranular microstructure development in the macroscopic behavior of multiphase steels in the context of changing strain paths

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
Materials Science and Engineering: A, 2009, 517 (1-2), pp.300-311. ⟨10.1016/j.msea.2009.03.074⟩
Article dans une revue istex hal-01205904 v1
Image document

Ellipticity loss analysis for tangent moduli deduced from a large strain elastic–plastic self-consistent model

Gérald Franz , Farid Abed-Meraim , Jean-Paul Lorrain , Tarak Ben Zineb , Xavier Lemoine et al.
International Journal of Plasticity, 2009, 25 (2), pp.205-238. ⟨10.1016/j.ijplas.2008.02.006⟩
Article dans une revue istex hal-01081905 v1
Image document

Strain localization analysis using a large deformation anisotropic elastic-plastic model coupled with damage

Badis Haddag , Farid Abed-Meraim , Tudor Balan
International Journal of Plasticity, 2009, 25 (10), pp.1970-1996. ⟨10.1016/j.ijplas.2008.12.013⟩
Article dans une revue istex hal-01206515 v1
Image document

Prise en compte des trajets de déformation dans la simulation de la mise en forme des tôles métalliques

Badis Haddag , Tudor Balan , Farid Abed-Meraim
Sciences, Technologies et Développement, 2008, pp.1-13
Article dans une revue hal-01241204 v1
Image document

Strain localization and damage prediction during sheet metal forming

Badis Haddag , Farid Abed-Meraim , Tudor Balan
International Journal of Material Forming, 2008, 1 (1), pp.229-232. ⟨10.1007/s12289-008-0362-z⟩
Article dans une revue hal-01205917 v1
Image document

Comparison of forming limit diagrams predicted with different localization criteria

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
Steel Research International, 2008, 79 (1), pp.24-31
Article dans une revue hal-01206460 v1
Image document

Finite element prediction of sheet forming defects using elastic-plastic, damage and localization models

Badis Haddag , Farid Abed-Meraim , Tudor Balan
American Institute of Physics Conf. Proc., 2007, 908, pp.227-232. ⟨10.1063/1.2740816⟩
Article dans une revue hal-01206463 v1
Image document

A quasi-static stability analysis for Biot’s equation and standard dissipative systems

Farid Abed-Meraim , Quoc Son Nguyen
European Journal of Mechanics - A/Solids, 2007, 26 (3), pp.383-393. ⟨10.1016/j.euromechsol.2006.06.005⟩
Article dans une revue istex hal-00105164 v1
Image document

A physically stabilized and locking-free formulation of the (SHB8PS) solid-shell element

Farid Abed-Meraim , Alain Combescure
Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2007, 16 (8), pp.1037-1072. ⟨10.3166/REMN.16.1037-1072⟩
Article dans une revue hal-01206776 v1
Image document

A multiscale model based on intragranular microstructure - Prediction of dislocation patterns at the microscopic scale

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
AIP Conference Proceedings, 2007, 907, pp.47-52. ⟨10.1063/1.2729486⟩
Article dans une revue hal-01240824 v1
Image document

Investigation of advanced strain-path dependent material models for sheet metal forming simulations

Badis Haddag , Tudor Balan , Farid Abed-Meraim
International Journal of Plasticity, 2007, 23 (6), pp.951-979. ⟨10.1016/j.ijplas.2006.10.004⟩
Article dans une revue hal-00755503 v1
Image document

Ductility Loss Modelling for BCC Single Crystals

Jean-Paul Lorrain , Tarak Ben-Zineb , Farid Abed-Meraim , Marcel Berveiller
International Journal of Forming Processes, 2005, 8 (2-3), pp.135-158. ⟨10.3166/IJFP.8.135-158⟩
Article dans une revue hal-05103894 v1
Image document

SHB8PS - a new adaptive, assumed-strain continuum mechanics shell element for impact analysis

Farid Abed-Meraim , Alain Combescure
Computers & Structures, 2002, 80 (9-10), pp.791-803. ⟨10.1016/S0045-7949(02)00047-0⟩
Article dans une revue istex hal-00655878 v1
Image document

Conditions suffisantes de stabilité pour les solides visqueux

Farid Abed Meraim
Comptes Rendus de l'Academie des Sciences Serie II, 1999, 327, pp.25-31. ⟨10.1016/S1287-4620(99)80006-4⟩
Article dans une revue istex hal-00111616 v1

Buckling and post-buckling analysis of auxetic cellular structures

Meriem Belhadjamor , Mohamed Ben Bettaieb , Salah Mezlini , Farid Abed-Meraim
5th International Conference on Materials Design and Applications (MDA-2024), Jul 2024, Porto, Portugal
Communication dans un congrès hal-05130077 v1
Image document

Ductility limit predictions for porous materials using a damage coupled CPFEM approach

Shuai Zhou , Mohamed Ben Bettaieb , Farid Abed-Meraim
19th European Mechanics of Materials Conference (EMMC19), May 2024, Madrid, Spain
Communication dans un congrès hal-05115311 v1
Image document

Impact of morphological and crystallographic textures on the formability limits of thin metal sheets using a CPFEM-based approach

Shuai Zhou , Mohamed Ben Bettaieb , Farid Abed-Meraim
16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France
Communication dans un congrès hal-04610958 v1

Investigation des effets de taille sous chargements complexes par la dynamique des dislocations discrètes en 3D

Yaovi Armand AMOUZOU-ADOUN , Mohamed Jebahi , Marc Fivel , Samuel Forest , Jean-Sebastien Lecomte et al.
Colloque plasticité 2023, Apr 2023, Lyon, France
Communication dans un congrès hal-05117189 v1

On the application of strain gradient crystal plasticity to study strain localization phenomena in single crystals

Lei Cai , Mohamed Jebahi , Farid Abed-Meraim
XVI International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2021), Sep 2021, Barcelone, Spain
Communication dans un congrès hal-03251864 v1
Image document

An anisotropic model with linear perturbation technique to predict HCP sheet metal ductility limit

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Farid Abed-Meraim , Mohamed Taoufik Khabou , Anas Bouguecha et al.
International Conference on Advanced Materials Mechanics and Manufacturing (A3M 2021), Mar 2021, Sfax, Tunisia
Communication dans un congrès hal-03251462 v1

On the application of strain gradient crystal plasticity to study strain localization phenomena in single crystals

Lei Cai , Mohamed Jebahi , Farid Abed-Meraim
6th International Conference on Materials Technology and Applications (ICMTA 2021), Oct 2021, Fukuoka, Japan
Communication dans un congrès hal-03450970 v1

Uncoupled dissipation assumption to control elastic gaps in Gurtin-type strain gradient models

Mohamed Jebahi , Lei Cai , Farid Abed-Meraim
International Conference on Plasticity, Damage and Fracture, Jan 2020, Rivera Maya, Mexico
Communication dans un congrès hal-03246950 v1
Image document

Finite Element Simulation of Sheet Metal Forming Processes using Non-Quadratic Anisotropic Plasticity Models and Solid-Shell Finite Elements

Nabeel Younas , Hocine Chalal , Farid Abed-Meraim
23rd International Conference on Material Forming, ESAFORM 2020, May 2020, Cottbus, Germany
Communication dans un congrès hal-03246909 v1
Image document

A comparative study of three techniques for the computation of the macroscopic tangent moduli by periodic homogenization

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
14éme Colloque National en calcul des structures, May 2019, Giens, France. 8p
Communication dans un congrès hal-02888655 v1
Image document

Formability limit prediction of TRIP780 steel sheet using lode angle dependent Gurson-based models with Thomason coalescence criterion and bifurcation analysis

Muhammad Waqar Nasir , Hocine Chalal , Farid Abed-Meraim
22nd International ESAFORM Conference on Material Forming (ESAFORM 2019), May 2019, Vitoria-Gasteiz, Spain. ⟨10.1063/1.5112706⟩
Communication dans un congrès hal-03246272 v1
Image document

On the non-quadratic defect energy in strain gradient crystal plasticity

Lei Cai , Mohamed Jebahi , Farid Abed-Meraim
14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France
Communication dans un congrès hal-03251361 v1

Prediction of material ductility and sheet metal formability in relation to plastic instabilities

Farid Abed-Meraim
International Conference on Advanced Materials, Mechanics and Manufacturing (A3M'2018), Dec 2018, Hammamet, Tunisia
Communication dans un congrès hal-03251406 v1

Simulation of structural applications and sheet metal forming processes based on quadratic solid-shell elements with explicit dynamic formulation

Hocine Chalal , Farid Abed-Meraim
6th European Seminar on Computing (ESCO), Jun 2018, Pilsen, Czech Republic
Communication dans un congrès hal-03251956 v1

Numerical investigation of the ductility limit of perforated sheets

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
12th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2018, Jul 2018, Amsterdam, Netherlands
Communication dans un congrès hal-03071677 v1
Image document

Prediction of Localized Necking in Polycrystalline Aggregates Based on Periodic Homogenization

Jianchang Zhu , Mohamed Ben Bettaieb , Farid Abed-Meraim
41st Solid Mechanics Conference (SolMech 2018), Aug 2018, Warsaw, Poland
Communication dans un congrès hal-03224989 v1
Image document

Effect of plastic anisotropy on the prediction of the ductility for HCP sheet metals

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Mohamed Taoufik Khabou , Farid Abed-Meraim , Mohamed Haddar
The Second International Conference on Acoustics and Vibration (ICAV2018), Mar 2018, Hammamet, Tunisia. ⟨10.1007/978-3-319-94616-0⟩
Communication dans un congrès hal-02901375 v1
Image document

Prediction of the ductility limit of magnesium AZ31B alloy

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Anas Bouguecha , Farid Abed-Meraim , Mohamed Taoufik Khabou et al.
Second International Conference on Advanced Materials, Mechanics and Manufacturing (A3M’2018), Dec 2018, Hammamet, Tunisia. pp.182-193
Communication dans un congrès hal-03048492 v1
Image document

Prédiction de la localisation des déformations en utilisant un modèle d'endommagement à base micromécanique : effets des paramètres d'écrouissage et d'endommagement sur la formabilité

Hocine Chalal , Farid Abed-Meraim
13ème Colloque National en Calcul des Structures (CSMA 2017), May 2017, Giens, France
Communication dans un congrès hal-03247009 v1
Image document

Hardening effects on formability limit prediction based on Gurson-type damage models and bifurcation analysis

Hocine Chalal , Farid Abed-Meraim
XIV International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2017), Sep 2017, Barcelone, Spain. pp.174-183
Communication dans un congrès hal-03246656 v1
Image document

Analysis of primal and dual variables in structural shape control by piezoelectric patches using solid-shell finite elements

Fessal Kpeky , Farid Abed-Meraim , El Mostafa Daya
8th ECCOMAS Thematic Conference on Smart Structures and Materials, Jun 2017, Madrid, Spain. pp.188-199
Communication dans un congrès hal-01778396 v1

Taylor Meshless Method for bending and buckling of thin plates

Haitao Tian , Michel Potier-Ferry , Farid Abed-Meraim
20th International Conference on Composite Structures (ICCS'20), Sep 2017, Paris, France
Communication dans un congrès hal-03265224 v1
Image document

Modelling the effect of microstructure evolution on the macroscopic behavior of single phase and dual phase steels. Application to sheet forming process

Salima Bouvier , Tales Carvalho-Resende , Tudor Balan , Farid Abed-Meraim
CMM 2017, Apr 2017, Meknès, Morocco
Communication dans un congrès hal-03251352 v1
Image document

Effect of hardening and damage parameters on the prediction of localized necking in thin sheet metals

Yasser Bouktir , Hocine Chalal , Farid Abed-Meraim
5th International Conference on Integrity-Reliability-Failure (IRF 2016), Jul 2016, Porto, Portugal
Communication dans un congrès hal-03246985 v1

New Linear and Quadratic Piezoelectric Solid-Shell Finite Elements

Fessal Kpeky , Farid Abed-Meraim , El Mostafa Daya
5th European Seminar on Computing (ESCO 2016), Jun 2016, Pilsen, Czech Republic
Communication dans un congrès hal-03246438 v1
Image document

Formability prediction of ductile materials using a non-associative plasticity model and bifurcation-based criteria

Yasser Bouktir , Hocine Chalal , Farid Abed-Meraim
International conference on COmputational methods in Manufacturing Processes (ICOMP'16), May 2016, Liège, Belgium
Communication dans un congrès hal-03246772 v1

Prediction of the ductility limit of sheet metals during forming processes using the loss of ellipticity approach

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
10th International Conference on Advanced Computational Engineering and Experimenting ACE-X 2016, Jul 2016, Split, Croatia
Communication dans un congrès hal-03071697 v1
Image document

On the use of solid-shell elements for thin structures: Application to impact and sheet metal forming simulations

Peng Wang , Hocine Chalal , Farid Abed-Meraim
19th International ESAFORM Conference on Material Forming (ESAFORM 2016), Apr 2016, Nantes, France. ⟨10.1063/1.4963460⟩
Communication dans un congrès hal-03246834 v1
Image document

Prediction of Forming Limit Diagrams under combined Bending-Stretching loadings

Mohamed Ben Bettaieb , Honoré Lagaza , Farid Abed-Meraim , Xavier Lemoine
12th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2016), Jul 2016, Troyes, France. pp.154-160, ⟨10.1051/matecconf/20168003003⟩
Communication dans un congrès hal-02871935 v1
Image document

Development of a new algorithm for the time integration of rate-independent crystal plasticity models

Mohamed Ben Bettaieb , Farid Abed-Meraim
International conference on COmputational methods in Manufacturing Processes, May 2016, Liège, Belgium. 3p
Communication dans un congrès hal-02899419 v1

Influence of variability in geometric and material parameters on the damping properties of multilayer structures

Fessal Kpeky , Farid Abed-Meraim , El Mostafa Daya
2nd International Conference on Mechanics of Composites (ICMC'2), Jul 2016, Porto, Portugal
Communication dans un congrès hal-03265226 v1
Image document

Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming, Jul 2016, Troyes, France. pp.8, ⟨10.1051/matecconf/20168002007⟩
Communication dans un congrès hal-02901356 v1
Image document

Simulation of nonlinear benchmarks and sheet metal forming processes using linear and quadratic solid–shell elements combined with advanced anisotropic behavior models

Peng Wang , Hocine Chalal , Farid Abed-Meraim
12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2016), Jul 2016, Troyes, France. ⟨10.1051/matecconf/20168007001⟩
Communication dans un congrès hal-03246515 v1
Image document

Determination of forming limit diagrams based on ductile damage models and necking criteria

Hocine Chalal , Farid Abed-Meraim
10th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2016), Jul 2016, Split, Croatia
Communication dans un congrès hal-03252609 v1
Image document

Prediction of strain localization using a micromechanics-based damage model: impact of damage and hardening parameters on formability

Hocine Chalal , Farid Abed-Meraim
International Symposium on Aircraft Materials, May 2016, Agadir, Morocco
Communication dans un congrès hal-03248382 v1
Image document

Prediction of localized necking based on crystal plasticity: Comparison of bifurcation and imperfection approaches

Holanyo K. Akpama , Mohamed Ben Bettaieb , Farid Abed-Meraim
Metal Forming 2016, Sep 2016, Krakow, Poland. pp.779-790
Communication dans un congrès hal-03048019 v1
Image document

Modeling of void coalescence initiation and its impact on the prediction of material failure

Sabeur Msolli , Mohamed Ben Bettaieb , Farid Abed-Meraim
ESAFORM 2016, Apr 2016, Nantes, France. 7p., ⟨10.1063/1.4963549⟩
Communication dans un congrès hal-02872239 v1
Image document

Comparison of bifurcation analysis and maximum force criteria in the prediction of necking in stretched metal sheets

Farid Abed-Meraim , Ron Peerlings , Marc Geers
XIII International Conference on Computational Plasticity, Fundamentals and Applications – COMPLAS 2015, Sep 2015, Barcelone, Spain. pp.182-193
Communication dans un congrès hal-01207261 v1
Image document

Analyse de bifurcation et critères de force maximum dans la prédiction des limites de striction des tôles métalliques étirées

Farid Abed-Meraim , Ron Peerlings , Marc Geers
12e Colloque National en Calcul des Structures (CSMA 2015), CSMA, May 2015, Giens, France
Communication dans un congrès hal-01515053 v1

Modélisation par éléments finis de type solide-coque de structures piézoélectriques

Fessal Kpeky , Hakim Boudaoud , Farid Abed-Meraim , El Mostafa Daya
22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. pp.*
Communication dans un congrès hal-01239683 v1

Effect of kinematic hardening on localized necking in substrate-supported metal layers

Mohamed Ben Bettaieb , Farid Abed-Meraim
9th International Conference on Advanced Computational Engineering (ACE-X-2015), Jun 2015, Munich, Germany
Communication dans un congrès hal-05130065 v1
Image document

Quasi-static and dynamic simulation of sheet metal forming processes usiing linear and quadratic solid-shell elements

Peng Wang , Hocine Chalal , Farid Abed-Meraim
6th International Conference on Mechanics and Materials in Design (M2D’15), Jul 2015, Ponta Delgada, Portugal
Communication dans un congrès hal-05115343 v1
Image document

Simulation multi-échelle du skin-pass des aciers IF : Prédiction de la texture de déformation et du comportement mécanique

Komi Dodzi Badji Soho , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444773 v1
Image document

Simulation multi-échelle du skin-pass des aciers IF : Prédiction de la texture de déformation et du comportement mécanique

Komi Soho , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-01232750 v1
Image document

Numerical predictions of ductile fracture limits in deep drawing processes

Hocine Chalal , Farid Abed-Meraim
6th International Conference on Mechanics and Materials in Design (M2D’15), Jul 2015, Ponta Delgada, Portugal
Communication dans un congrès hal-05110128 v1
Image document

Simulation multi-échelle du skin-pass des aciers IF : Prédiction de la texture de déformation et du comportement mécanique

Komi Soho , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
12ème Colloque National en Calcul des Structures (CSMA 2015), CSMA, May 2015, Giens, France
Communication dans un congrès hal-01203331 v1
Image document

Modelling the effect of microstructure evolution on the macroscopic behavior of single phase and dual phase steels: Application to sheet forming process

Salima Bouvier , Tales Carvalho-Resende , Tudor Balan , Farid Abed-Meraim
International Symposium on Plasticity and its Current Applications: Plasticity’15, Jan 2015, Montego Bay, Jamaica
Communication dans un congrès hal-01936486 v1

Influence of the loading path on the mechanical behavior of metallic materials

Komi Soho , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
International conference on COmputational methods in Manufacturing Processes ICOMP’14, Sep 2014, Saint-Etienne, France
Communication dans un congrès hal-01234614 v1

Influence du trajet de chargement sur la réponse mécanique d’un matériau métallique

Soho Komi , Xavier Lemoine , Farid Abed-Meraim , Hamid Zahrouni
Colloque Matériaux 2014, Nov 2014, Montpellier, France
Communication dans un congrès hal-01234899 v1

Dynamic response of viscoelastic multilayers structures using solid-shell finite elements

Fessal Kpeky , Hakim Boudaoud , Hocine Chalal , Farid Abed-Meraim , El Mostafa M Daya
XIXth Symposium VISHNO (Vibrations, Shocks and Noise), Jun 2014, Aix-en-Provence, France
Communication dans un congrès hal-01238123 v1
Image document

Vibration modeling of sandwich structures using solid-shell finite elements

Fessal Kpeky , Hakim Boudaoud , Hocine Chalal , Farid Abed-Meraim , El Mostafa Daya
Joint 11th World Congress on Computational Mechanics, WCCM 2014, the 5th European Conference on Computational Mechanics, ECCM 2014 and the 6th European Conference on Computational Fluid Dynamics, ECFD 2014, Jul 2014, Barcelone, Spain. pp.3650-3657
Communication dans un congrès hal-01203320 v1
Image document

Éléments finis de type coques volumiques pour la simulation des structures minces

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
11ème Congrès de Mécanique, Apr 2013, Agadir, Maroc. pp.104-107
Communication dans un congrès hal-01217865 v1
Image document

Formulation d'éléments finis quadratiques de type solide-coque et leur évaluation sur des cas tests standards

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
11ème Colloque National en Calcul des Structures (CSMA 2013), May 2013, Giens, France
Communication dans un congrès hal-01722111 v1
Image document

Overview of the theoretical relations between necking and strain localization criteria.

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-00903644 v1
Image document

Relations théoriques entre les critères d'instabilités plastiques

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03440396 v1
Image document

New quadratic solid-shell elements and their evaluation on popular benchmark problems

Farid Abed-Meraim , Vuong-Dieu Trinh , Alain Combescure
3rd European Seminar on Computing (ESCO 2012), Jun 2012, Pilsen, Czech Republic
Communication dans un congrès hal-01238038 v1
Image document

Evaluation of a New Solid-Shell Finite Element on the Simulation of Sheet Metal Forming Processes

Hocine Chalal , Abdellah Salahouelhadj , Farid Abed-Meraim
14th International Conference on Metal Forming, Sep 2012, Cracovie, Poland. pp.315-318
Communication dans un congrès hal-05117097 v1
Image document

Prediction of strain localization during sheet metal forming using bifurcation analysis and Gurson-type damage

Lotfi Mansouri , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
COMPLAS’XI, Sep 2011, Barcelone, Spain
Communication dans un congrès hal-01199633 v1
Image document

Prédiction de la localisation par une approche d’endommagement micromécanique couplée à une analyse de bifurcation : application à la mise en forme des tôles

Lotfi Mansouri , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-01224505 v1
Image document

Impact of microstructural mechanisms on ductility limits

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
Journées annuelles de la SF2M, Jul 2011, Nancy, France. pp.3-9
Communication dans un congrès hal-01203315 v1
Image document

Prediction of Springback After Draw‐Bending Test Using Different Material Models

Sever-Gabriel Racz , Salim Khan , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
International Conference on Advances in Materials and Processing Technologies (AMPT 2010), Oct 2010, Paris, France. pp.419-424, ⟨10.1063/1.3552481⟩
Communication dans un congrès hal-01207297 v1

On the implementation of the continuum shell finite element SHB8PS and application to sheet forming simulation

Abdellah Salahouelhadj , Farid Abed-Meraim , Hocine Chalal , Tudor Balan
14th International Conference on Material Forming Esaform, Apr 2011, Belfast, Ireland. pp.1203-1208, ⟨10.1063/1.3589680⟩
Communication dans un congrès hal-00656294 v1
Image document

Elastic-plastic analyses using the solid-shell finite element SHB8PS and evaluation on sheet forming applications

Abdellah Salahouelhadj , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
11th International Conference on Computational Plasticity (COMPLAS XI) - Fundamentals and Applications, Sep 2011, Barcelone, Spain. pp.1369-1379
Communication dans un congrès hal-01215925 v1

Assumed-strain solid–shell formulation for the six-node finite element SHB6: evaluation on nonlinear benchmark problems

Farid Abed-Meraim , Vuong-Dieu Trinh , Alain Combescure
4th International Congress Design and Modeling of Mechanical Systems CMSM’2011, May 2011, Sousse, Tunisia
Communication dans un congrès hal-01218034 v1

Formability prediction of damageable elastic-viscoplastic media by a material stability analysis based on a linear perturbation method

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
IV European Conference on Computational Mechanics ECCM 2010, May 2010, Paris, France
Communication dans un congrès hal-01233767 v1

Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations

Tales Carvalho Resende , Tudor Balan , Farid Abed-Meraim , Salima Bouvier , Simon-Serge Sablin
10th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2010), Jun 2010, Pohang, South Korea. pp.1339-1346, ⟨10.1063/1.3457539⟩
Communication dans un congrès hal-00656277 v1

Prediction of Springback After Draw-Bending Test Using Different Material Models

Sever-Gabriel Racz , Salim Khan , Hocine Chalal , Farid Abed-Meraim , Tudor Balan
International Conference on Advances in Materials and Processing Technologies, Oct 2010, Paris, France. pp.419-424, ⟨10.1063/1.3552481⟩
Communication dans un congrès hal-00656289 v1

Formulation of new quadratic solid-shell elements and their evaluation on popular benchmark problems

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
9th WCCM Conference on Computational Mechanics, Jul 2010, Sydney, Australia
Communication dans un congrès hal-01238077 v1

Application of a dislocation based model for Interstitial Free (IF) steels to Marciniak Stretch test simulations

Tales Carvalho-Resende , Ayoub Saadaoui , Tudor Balan , Farid Abed-Meraim , Salima Bouvier et al.
IV European Conference on Computational Mechanics: ECCM 2010, May 2010, Paris, France
Communication dans un congrès hal-01237352 v1
Image document

Work-hardening predicition using a dislocation based model for automotive Interstitial Free (IF) steels

Tales Carvalho-Resende , Salima Bouvier , Tudor Balan , Farid Abed-Meraim , Simon-Serge Sablin
1st International Conference on Material Modeling, Sep 2009, Dortmund, Germany. pp.1-8
Communication dans un congrès hal-01240862 v1
Image document

Strain localization analysis deduced from a large strain elastic-plastic self-consistent model for multiphase steels

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
12th International Conference on Fracture, Jul 2009, Ottawa, Canada. pp.5004-5014
Communication dans un congrès hal-01234657 v1
Image document

Une nouvelle formulation solide–coque basée sur le concept «Assumed Strain» pour l'élément fini prismatique à six nœuds «SHB6»

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
9ème Colloque National en Calcul des Structures, May 2009, Giens, France
Communication dans un congrès hal-01199800 v1
Image document

Modélisation de critères de localisation : prédiction de l’orientation des bandes de localisation et tracé de courbes limites de formage

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p
Communication dans un congrès hal-01233602 v1

New prismatic solid-shell element: Assumed strain formulation and evaluation on benchmark problems.

V.D. Trinh , F. Abed-Meraim
6th International Conference on Computation of Shell & Spatial Structures., May 2008, France
Communication dans un congrès hal-00469417 v1
Image document

Prédiction de courbes limites de formage avec un modèle élasto–plastique–endommagement et un critère de localisation

Badis Haddag , Farid Abed-Meraim , Tudor Balan
Colloque National Mécamat, Aussois, Jan 2008, Aussois, France. pp.66-69
Communication dans un congrès hal-01232779 v1

Les simulations numériques de la mise en forme sont-elles fiables ?

Alain Combescure , Michel Brunet , Bertrand Maurel , Germaine Nefussi , Farid Abed-Meraim
Colloque National Mécamat, Aussois, Jan 2008, Aussois, France
Communication dans un congrès hal-01240716 v1

Locking-free formulation for the stabilized enhanced strain solid-shell element (SHB8PS): geometrically non-linear applications

Farid Abed-Meraim , Alain Combescure
6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008, May 2008, Ithaca, United States
Communication dans un congrès hal-01218192 v1
Image document

Numerical Investigation of the Limit Strains in Sheet Forming Involving Bending

Tudor Balan , Farid Abed-Meraim
9th International Conference on Technology of Plasticity, ICTP 2008, Sep 2008, Gyeongju, South Korea. pp.690-695
Communication dans un congrès hal-01213664 v1
Image document

Prédictions de courbes limites de formage avec les critères de localisation de Marciniak-Kuczynski et de Hill

Guillaume Altmeyer , Farid Abed-Meraim , Tudor Balan
Colloque National Mécamat Aussois, Jan 2008, Aussois, France. pp.10-13
Communication dans un congrès hal-01206640 v1
Image document

New prismatic solid-shell element: Assumed strain formulation and evaluation on benchmark problems

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008, May 2008, Ithaca, United States
Communication dans un congrès hal-01224492 v1

Prediction of strain localization in sheet metal forming using elastoplastic-damage model and localization criterion

Badis Haddag , Farid Abed-Meraim , Tudor Balan
International Conference on Computational Fracture and Failure of Materials and Structures: CFRAC 2007, Jun 2007, Nantes, France
Communication dans un congrès hal-01236739 v1
Image document

Modélisation Elasto-Viscoplastique du Comportement des Aciers

Jean-Marc Pipard , Farid Abed-Meraim , Tudor Balan , Marcel Berveiller , Olivier Bouaziz et al.
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-01217581 v1

A multiscale model based on intragranular microstructure - Prediction of dislocation patterns at the microscopic scale

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
10th ESAFORM Conference on Material Forming, Apr 2007, Zaragoza, Spain. pp.47-52, ⟨10.1063/1.2729486⟩
Communication dans un congrès hal-00656182 v1
Image document

Modèle élasto-plastique à écrouissage microstructural : Application à la mise en forme des tôles métalliques

Badis Haddag , Tudor Balan , Farid Abed-Meraim
Congrès Algérien de Mécanique de Construction CAMC07, Apr 2007, Alger, Algérie
Communication dans un congrès hal-01226374 v1
Image document

Influence de la microstructure intragranulaire sur l'évolution des surfaces de charge d'un acier ferritique lors de trajets de déformation monotones et complexes

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-01225603 v1
Image document

Développement d'un nouvel élément fini « SHB6 » de type solide-coque

Vuong-Dieu Trinh , Farid Abed-Meraim , Alain Combescure
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Communication dans un congrès hal-01504291 v1
Image document

Modélisation élasto-viscoplastique du comportement des aciers

Jean-Marc Pipard , Farid Abed-Meraim , T. Balan , Marcel Berveiller , O. Bouaziz et al.
CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France
Communication dans un congrès hal-03362469 v1
Image document

Analyse de stabilité des évolutions quasi-statiques de systèmes standard dissipatifs

Farid Abed-Meraim , Quoc Son Nguyen
8ème Congrès de Mécanique, Apr 2007, El Jadida, Maroc. pp.193-195
Communication dans un congrès hal-01219444 v1
Image document

Validation d’une nouvelle version de l’élément solide/coque “SHB8PS” sur des cas tests non linéaires

Farid Abed-Meraim , Alain Combescure
8ème Congrès de Mécanique, Apr 2007, El Jadida, Maroc. pp.115-117
Communication dans un congrès hal-01214334 v1

Finite element prediction of sheet forming defects using elastic-plastic, damage and localization models

Badis Haddag , Farid Abed-Meraim , Tudor Balan
9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 07), Jun 2007, Porto, Portugal. pp.227-232, ⟨10.1063/1.2740816⟩
Communication dans un congrès hal-00656200 v1
Image document

A Multiscale Model Based On Intragranular Microstructure: Influence Of Grain-Scale Substructure On Macroscopic Behaviour Of An IF-Steel During Complex Load Paths

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
NUMIFORM 07: Materials Processing and Design: Modeling, Simulation and Applications, Jun 2007, Porto, Portugal. pp.1345-1350, ⟨10.1063/1.2740996⟩
Communication dans un congrès hal-01206835 v1
Image document

Improved formulation for the stabilized enhanced strain solid-shell element (SHB8PS): geometric linear and nonlinear applications

Farid Abed-Meraim , Alain Combescure
17th International Conference on Computer Methods in Mechanics, Jun 2007, Lodz-Spala, Poland. 9 pp
Communication dans un congrès hal-01226198 v1
Image document

Strain localization analysis using a large strain self-consistent approach

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
17th International Workshop on Computational Mechanics of Materials, (IWCMM 17), Aug 2007, Paris, France
Communication dans un congrès hal-01234905 v1
Image document

A new locking-free formulation for the SHB8PS solid–shell element: non-linear benchmark problems

Farid Abed-Meraim , Alain Combescure
International Conference on Computational Methods for Coupled Problems in Science and Engineering: COUPLED PROBLEMS 2007, May 2007, Ibiza, Spain
Communication dans un congrès hal-01235439 v1

Influence de la microstructure intragranulaire sur l'évolution des surfaces de charge d'un acier ferritique lors de trajets de déformation monotones et complexes

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
2nd Saar-Lor-Lux Colloquium in Mechanics (SLLCM2), Mar 2007, Nancy, France
Communication dans un congrès hal-05118648 v1
Image document

Strain localization analysis using large deformation anisotropic elastoplastic model coupled with damage

Badis Haddag , Farid Abed-Meraim , Tudor Balan
3d European Conference on Computational Mechanics (ECCM 2006), Jun 2006, Lisbone, Portugal. pp.14
Communication dans un congrès hal-05095665 v1
Image document

Détermination des diagrammes de perte d'ellipticité par une approche micromécanique

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Marcel Berveiller , Xavier Lemoine
Colloque National Mécamat, Jan 2006, Aussois, France
Communication dans un congrès hal-05103914 v1
Image document

Implantation et validation de l’élément fini SHB8 dans ABAQUS

Mohamed El Hédi Ben Zeineb , Farid Abed-Meraim , Tudor Balan
17ème Congrès Français de Mécanique, Aug 2005, Troyes, France. pp.6
Communication dans un congrès hal-05095203 v1
Image document

Stabilisation et projection de type « Assumed Strain » de l'élément de coque massif « SHB8PS » pour éliminer les problèmes de verrouillage

Farid Abed-Meraim , Alain Combescure
7e colloque national en calcul des structures, CSMA, May 2005, Giens, France
Communication dans un congrès hal-01812918 v1
Image document

Approche micromécanique de l’influence des trajets de déformations sur la limite de formabilité des aciers

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Marcel Berveiller
17ème Congrès Français de Mécanique, Jul 2005, Troyes, France. 7p
Communication dans un congrès hal-05095472 v1
Image document

Une nouvelle formulation libre de verrouillage pour l’élément de coque massif “SHB8PS”

Farid Abed-Meraim , Alain Combescure
7ème Congrès de Mécanique, Apr 2005, Casablanca, Maroc. pp.264-266
Communication dans un congrès hal-05095311 v1
Image document

Springback prediction of sheet metal in the deep drawing process using elastoplastic phenomenological models

Badis Haddag , Tudor Balan , Farid Abed-Meraim
International Conference on Technology of Plasticity (8th ICTP), Oct 2005, Verona, Italy
Communication dans un congrès hal-05115337 v1
Image document

Springback Simulation: Impact of Some Advanced Constitutive Models and Numerical Parameters

Badis Haddag , Tudor Balan , Farid Abed-Meraim
6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2005), Aug 2005, Detroit, Michigan, United States. pp.286-294, ⟨10.1063/1.2011235⟩
Communication dans un congrès hal-05106132 v1
Image document

Implementation and comparison of advanced behaviour laws for sheet metal forming

Sever-Gabriel Racz , Xavier Lemoine , Badis Haddag , Farid Abed-Meraim
8th ESAFORM Conference on Material Forming, Apr 2005, Cluj-Napoca, Romania. pp.293-296
Communication dans un congrès hal-05115989 v1
Image document

Prédiction du retour élastique en emboutissage avec une loi de comportement élastoplastique tenant compte des changements de trajet de déformation

Badis Haddag , Tudor Balan , Farid Abed-Meraim
17ème Congrès Français de Mécanique, Aug 2005, Troyes, France. 6p
Communication dans un congrès hal-05095576 v1
Image document

Deformation behaviour of 304 stainless steel - experimental and modelling

Bertrand Petit , Nathalie Gey , Farid Abed-Meraim , Michel Humbert , Tarak Ben Zineb et al.
EUROMAT'05, Sep 2005, Prague, Czech Republic
Communication dans un congrès hal-05120381 v1
Image document

Springback simulation: Impact of some advanced constitutive models and numerical parameters

Badis Haddag , Tudor Balan , Farid Abed-Meraim
6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2005), Aug 2005, Detroit, Michigan, United States
Communication dans un congrès hal-00656150 v1
Image document

Finite element simulation of deep drawing with initial and induced anisotropy

Tudor Balan , Farid Abed-Meraim , Badis Haddag
International Conference IDDRG, May 2004, Sindelfingen, Germany
Communication dans un congrès hal-05110170 v1
Image document

Prédiction du comportement anisotrope lors de la mise en forme par emboutissage

Badis Haddag , Tudor Balan , Farid Abed-Meraim , Marcel Berveiller
Congrès MECAMAT Aussois, Jan 2004, Aussois, France. 4p
Communication dans un congrès hal-05095595 v1

Finite element prediction of strain-path induced anisotropy in deep drawing

Badis Haddag , Tudor Balan , Farid Abed-Meraim
7th International Esaform Conference, Apr 2004, Trondheim ( Norvège), Norway. pp.491-494
Communication dans un congrès hal-05118138 v1

Prédiction de la perte de ductilité des aciers à partir d’une modélisation micromécanique

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
Colloque Plasticité, Apr 2004, Metz, France
Communication dans un congrès hal-05117583 v1
Image document

Self-consistent large strain modelling of polycrystals: application to ductility loss prediction

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
13th International Workshop on Computational Mechanics of Materials (IWCMM 13), Sep 2003, Magdeburg, Germany. 8p
Communication dans un congrès hal-05110186 v1

Modélisation de l'influence des caractéristiques mécaniques sur la ductilité des matériaux cristallins

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
16ème Congrès Français de Mécanique, Sep 2003, Nice, France
Communication dans un congrès hal-05118173 v1

Validation d’une loi de comportement monocristalline en grandes déformations

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
Colloque National MECAMAT (Aussois), Jan 2003, Aussois, France. pp.329-332
Communication dans un congrès hal-05118213 v1

Modélisation de l’essai Charpy et analyse des contraintes résiduelles

Johan Herman , Farid Abed-Meraim , Karim Inal , Renaud Masson
Colloque du GFAC, Apr 2003, Metz, France
Communication dans un congrès hal-05118351 v1

On the implementation of hardening models in sheet forming simulations

Ahmed Haddad , Tudor Balan , Farid Abed-Meraim
6th International ESAFORM Conference on Material forming, Apr 2003, Salerno, Italy. pp.187-190
Communication dans un congrès hal-05118276 v1

Behavior modelling of BCC elastic plastic polycrystal: Comparison theory/experiments

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
Plasticity’03 - 10th International Symposium on Plasticity and its Current Applications, Dislocations, plasticity and metal forming, Jul 2003, Quebec city, Canada. pp.552-554
Communication dans un congrès hal-05118198 v1
Image document

Modélisation du comportement élastoplastique de monocristaux de structure cubique. Comparaison théorie/expérience

Jean-Paul Lorrain , Tarak Ben Zineb , Farid Abed-Meraim , Marcel Berveiller
4èmes Journées Scientifiques et Techniques en Mécanique et Matériau (JSTMM’02), Oct 2002, Monastir, Tunisie. pp.8
Communication dans un congrès hal-05095421 v1

SHB8PS a new "intelligent" assumed strain "continuum" mechanics shell element for impact analysis on a rotating body

Farid Abed-Meraim , Alain Combescure
1srt MIT Conférence, Jun 2001, États-Unis
Communication dans un congrès hal-00508068 v1
Image document

Une nouvelle approche de stabilité pour les solides sensibles à la vitesse de déformation

Farid Abed-Meraim
Canadian Society for Mechanical Engineering Forum, May 2000, Montréal, Canada
Communication dans un congrès hal-05091939 v1
Image document

A NEW CRITERION OF STABILITY FOR THE VISCOUS SOLIDS: DISPLACEMENT FIELD APPROACH

Farid Abed-Meraim
The Fourth International Conference on Modern Practice in Stress and Vibration Analysis, Sep 2000, Nottingham, United Kingdom. pp.39-49
Communication dans un congrès hal-05117557 v1

On the stability of an elastic-plastic or elasto-visco-plastic evolution

Farid Abed-Meraim , Quoc Son Nguyen
Instability, Bifurcation and Localisation in Fracture of Materials (Euromech 390), May 1999, Cachan, France
Communication dans un congrès hal-00117836 v1
Image document

Stabilité des solides visqueux : exemples structuraux

Farid Abed-Meraim
4e colloque national en calcul de structure de Giens, 1999, Giens, France. pp.557-562
Communication dans un congrès hal-00116545 v1
Image document

Stabilité d'une évolution visco-élastique ou visco-plastique

Farid Abed-Meraim
14e Congrès Français de Mécanique, 1999, Toulouse, France
Communication dans un congrès hal-00117835 v1

Stability analysis of viscous solids in large strain

Farid Abed-Meraim
1st International Conference on Advances in Structural Engineering and Mechanics (ASEM'99), Choi, CK (Choi, CK) ; Schnobrich, WC (Schnobrich, WC), Aug 1999, SEOUL, South Korea. pp.463-468
Communication dans un congrès hal-05090651 v1

Stabilité des solides et structures dépendant de la vitesse de déformation

Farid Abed-Meraim
Symposium of the Mech. of Solids and Struct. Materials Technology, May 1998, Toronto, Canada. pp.317-325
Communication dans un congrès hal-05117588 v1
Image document

Strain localization analysis using a large strain self-consistent approach

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb , Xavier Lemoine , Marcel Berveiller
Shear 07, International Symposium on Shear Behavior and Mechanisms in Materials Plasticity, Sep 2007, Nancy, France. 2007
Poster de conférence hal-01232410 v1
Image document

Numerical Investigation on the Inelastic Instability of Cruciform Columns: Effect of Material and Geometric Parameters

Meriem Belhadjamor , Mohamed Ben Bettaieb , Salah Mezlini , Farid Abed-Meraim
Design and Modeling of Mechanical Systems - VI (CMSM 2023), Springer Nature Switzerland, pp.116-124, 2024, 9783031671524. ⟨10.1007/978-3-031-67152-4_12⟩
Chapitre d'ouvrage hal-04685245 v1
Image document

An anisotropic model with linear perturbation technique to predict HCP sheet metal ductility limit

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Farid Abed-Meraim , Mohamed Taoufik Khabou , Anas Bouguecha et al.
Advances in Materials, Mechanics and Manufacturing, Springer International Publishing, pp.164-176, 2022, Lecture Notes in Mechanical Engineering, 978-303084957-3. ⟨10.1007/978-3-030-84958-0_18⟩
Chapitre d'ouvrage hal-03437354 v1
Image document

An Anisotropic Model with Linear Perturbation Technique to Predict HCP Sheet Metal Ductility Limit

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Farid Abed-Meraim , Mohamed Taoufik Khabou , Anas Bouguecha et al.
Advances in Materials, Mechanics and Manufacturing, Springer International Publishing, pp.164-176, 2021, 978-303084957-3. ⟨10.1007/978-3-030-84958-0_18⟩
Chapitre d'ouvrage hal-03454441 v1
Image document

Prediction of the Ductility Limit of Magnesium AZ31B Alloy

Mohamed Yassine Jedidi , Mohamed Ben Bettaieb , Anas Bouguecha , Farid Abed-Meraim , Mohamed Taoufik Khabou et al.
Advances in Materials, Mechanics and Manufacturing (Proceedings of the Second International Conference on Advanced Materials, Mechanics and Manufacturing ), Springer International Publishing, pp.182-193, 2019, 9783030242466. ⟨10.1007/978-3-030-24247-3_21⟩
Chapitre d'ouvrage hal-02873000 v1
Image document

Stability of a quasi-static evolution of a visco-elastic, visco-plastic or elastic-plastic solid

Farid Abed-Meraim , Quoc Son Nguyen
Nonsmooth/Nonconvex Mechanics, Kluwer Academic Publications, pp.1-14, 2001, ⟨10.1007/978-1-4613-0275-9_1⟩
Chapitre d'ouvrage hal-00112285 v1
Image document

Quelques problèmes de stabilité et de bifurcation des solides visqueux

Farid Abed-Meraim
Mécanique des solides [physics.class-ph]. Ecole Polytechnique X, 1999. Français. ⟨NNT : ⟩
Thèse tel-00655820 v1