Frédéric DEMOLY

Professeur des Universités Directeur du Département CO2M, ICB UMR 6303
89
Documents

Présentation

My research focuses primarily on AI-driven (inverse and explainable) design for assembly, multi-material additive manufacturing, and 4D printing. I serve as the Principal Investigator on several research projects and was awarded an Innovation Chair from the Institute universitaire de France (IUF) in 2023 for my pioneering work in design for 4D printing. I currently lead the CNRS research network TRANS4M, dedicated to smart materials and transformable structures enabled by 4D printing.

Domaines de recherche

Sciences de l'ingénieur [physics] Génie des procédés Matériaux Mécanique [physics.med-ph] Génie mécanique [physics.class-ph]

Publications

Publications

Deposit thumbnail

Large-scale computational design and simulation of viscoelastic metastructures for vibration attenuation

Robin Turlin , Thibaut Hirschler , Théo Calais , Hichem Seriket , Gaël Chevallier et al.

International Journal of Mechanical Sciences, 2026, 316, pp.111469. ⟨10.1016/j.ijmecsci.2026.111469⟩

Article dans une revue hal-05539068v1
Deposit thumbnail

Shape-Morphing Photo-Crosslinked Alginate Hydrogels via Digital Light Processing 4D Printing

Michel Habib , Ariella Liberati , Naomi Nieswic , Jade Berthelot , Hichem Seriket et al.

Applied Materials Today, 2026, 48 (103064), ⟨10.1016/j.apmt.2025.103064⟩

Article dans une revue hal-05444082v1
Deposit thumbnail

Reinforcement learning-enabled design of topological interlocking materials for sustainable multi-material additive manufacturing

Hichem Seriket , Oualid Bougzime , Yuyang Song , H. Jerry Qi , Frédéric Demoly

Additive Manufacturing, 2025, 111, pp.104992. ⟨10.1016/j.addma.2025.104992⟩

Article dans une revue hal-05455120v1
Deposit thumbnail

Recycling Commodity Plastic Waste for Vat Photopolymerization 3D Printing of High-Performance Polymeric Composites

Farzad Gholami , Mingzhe Li , Alvaro Hucker , Summer Clark , Frédéric Demoly et al.

ACS Applied Polymer Materials, 2025, 7 (23), pp.16194-16205. ⟨10.1021/acsapm.5c02101⟩

Article dans une revue hal-05455118v1
Deposit thumbnail

Bistable Compliant Mechanism 3D Printing for Tuned Mass Damper Vibration Control

Ali Zolfagharian , Frédéric Demoly , Mohammad Lakhi , Bernard Rolfe , Mahdi Bodaghi

Advanced Engineering Materials, In press, ⟨10.1002/adem.202402233⟩

Article dans une revue hal-05017116v1
Deposit thumbnail

Flexible multifunctional composites with integrated sensing and photo-actuation via hybrid 4D printing

Mei Chen , Ran An , Frédéric Demoly , Hang Jerry Qi , Kun Zhou

Materials Science and Engineering: R: Reports, 2025, 163, pp.100890. ⟨10.1016/j.mser.2024.100890⟩

Article dans une revue hal-05017060v1
Deposit thumbnail

Topology-optimized multimaterial 4D-printed Fabry–Perot filter with enhanced thermal stability using two-photon polymerization

Johnny Moughames , Julio Andrés Iglesias Martínez , Gwenn Ulliac , Thibaut Sylvestre , Barbot Antoine et al.

Thin-Walled Structures, 2025, 209, pp.112900. ⟨10.1016/j.tws.2024.112900⟩

Article dans une revue hal-05017023v1
Deposit thumbnail

Neuro-symbolic artificial intelligence in accelerated design for 4D printing: Status, challenges, and perspectives

Oualid Bougzime , Christophe Cruz , Jean-Claude André , Kun Zhou , H. Jerry Qi et al.

Materials & Design, 2025, 252, pp.113737. ⟨10.1016/j.matdes.2025.113737⟩

Article dans une revue hal-05017089v1
Deposit thumbnail

Encoding magnetic anisotropies in digital light processing 3D printing

Eléonore Aïdonidis , Andrea Cosola , Pierre Bourdon , Hichem Dammak , Marco Sangermano et al.

Advanced Functional Materials, 2025, 2025, pp.e23995. ⟨10.1002/adfm.202523995⟩

Article dans une revue hal-05384939v1
Deposit thumbnail

Iterative Data Curation for Machine Learning‐Based Inverse Design of Active Composite Plates for Four‐Dimensional Printing

Teerapong Poltue , Chao Zhang , Frédéric Demoly , Kun Zhou , H. Jerry Qi

Advanced Intelligent Systems, 2025, pp.e202500916. ⟨10.1002/aisy.202500916⟩

Article dans une revue hal-05455125v1
Deposit thumbnail

An optimal penalty method for the joint stiffening in beam models of additively manufactured lattice structures

T. Cadart , T. Hirschler , Slim Bahi , S. Roth , Frédéric Demoly et al.

International Journal of Solids and Structures, 2025, 306, pp.113107. ⟨10.1016/j.ijsolstr.2024.113107⟩

Article dans une revue hal-04771822v1
Deposit thumbnail

Machine Learning‐Based Optimization of Pixel Light Intensities for Improving Polymerization Accuracy in Digital Light Processing 3D Printing

Teerapong Poltue , Stuart Macrae Montgomery , Xiaohao Sun , Chao Zhang , Frédéric Demoly et al.

Advanced Materials Technologies, 2025, 10 (20), pp.e00902. ⟨10.1002/admt.202500902⟩

Article dans une revue hal-05455115v1
Deposit thumbnail

Unlocking the Potential of Generative AI through Neuro-Symbolic Architectures -Benefits and Limitations

Oualid Bougzime , Samir Jabbar , Christophe Cruz , Frédéric Demoly

Materials & Design, 2025, 252, pp.113737

Article dans une revue hal-05455094v1

Quelle(s) formation(s) pour une recherche industrielle ?

Eric Schaer , Frédéric Demoly , Jean-Claude André

Entropie : thermodynamique – énergie – environnement – économie, 2024, 4 (2), ⟨10.21494/ISTE.OP.2024.1143⟩

Article dans une revue hal-04772876v1
Deposit thumbnail

4D printing roadmap

Mahdi Bodaghi , Linlin Wang , Fenghua Zhang , Yanju Liu , Jinsong Leng et al.

Smart Materials and Structures, 2024, 33 (11), pp.113501. ⟨10.1088/1361-665X/ad5c22⟩

Article dans une revue hal-04772833v1

Advancing 4D printing through designing interlocking blocks: enhancing deformation uniformity in active composite structures

Kheira Benyahia , Hichem Seriket , Sébastien Blanquer , Samuel Gomes , Mahdi Bodaghi et al.

Smart Materials and Structures, 2024, 33 (5), pp.055023. ⟨10.1088/1361-665X/ad3c85⟩

Article dans une revue hal-04567112v1
Deposit thumbnail

Human‐Material Interaction Enabled by FFF 4D Printing

Mohammadreza Lalegani Dezaki , Ali Zolfagharian , Frédéric Demoly , Mahdi Bodaghi

Advanced Engineering Materials, In press, ⟨10.1002/adem.202301917⟩

Article dans une revue hal-04450194v1

Le biomimétisme, une voie à explorer pour le Génie des procédés ?

Eric Schaer , Frédéric Demoly , Jean-Claude André

Entropie : thermodynamique – énergie – environnement – économie, 2024, 4 (2), ⟨10.21494/ISTE.OP.2024.1144⟩

Article dans une revue hal-04772869v1
Deposit thumbnail

Machine learning-enabled forward prediction and inverse design of 4D-printed active plates

Xiaohao Sun , Liang Yue , Luxia Yu , Connor T Forte , Connor D Armstrong et al.

Nature Communications, 2024, 15, pp.5509. ⟨10.1038/s41467-024-49775-z⟩

Article dans une revue hal-05455056v1
Deposit thumbnail

Machine learning and sequential subdomain optimization for ultrafast inverse design of 4D-printed active composite structures

Xiaohao Sun , Luxia Yu , Liang Yue , Kun Zhou , Frédéric Demoly et al.

Journal of the Mechanics and Physics of Solids, In press, pp.105561. ⟨10.1016/j.jmps.2024.105561⟩

Article dans une revue hal-04450140v1
Deposit thumbnail

4D Printing: Bridging the Gap between Fundamental Research and Real-World Applications

Frédéric Demoly , Jean-Claude André

Applied Sciences, 2024, 14 (13), pp.5669. ⟨10.3390/app14135669⟩

Article dans une revue hal-04692005v1
Deposit thumbnail

Robotic Conformal Material Extrusion 3D Printing for Appending Structures on Unstructured Surfaces

Connor David Armstrong , Stuart Macrae Montgomery , Liang Yue , Frédéric Demoly , Kun Zhou et al.

Advanced Intelligent Systems, 2024, 6 (3), pp.2300516. ⟨10.1002/aisy.202300516⟩

Article dans une revue hal-05455031v1
Deposit thumbnail

Limpet-inspired design and 3D/4D printing of sustainable sandwich panels: Pioneering supreme resiliency, recoverability and repairability

Saman Jolaiy , Armin Yousefi , Mohsen Hosseini , Ali Zolfagharian , Frédéric Demoly et al.

Applied Materials Today, 2024, 38, pp.102243. ⟨10.1016/j.apmt.2024.102243⟩

Article dans une revue hal-05455088v1
Deposit thumbnail

Perspective: Machine Learning in Design for 3D/4D Printing

Xiaohao Sun , Kun Zhou , Frédéric Demoly , Ruike Renee Zhao , H. Jerry Qi

Journal of Applied Mechanics, 2024, 91 (3), ⟨10.1115/1.4063684⟩

Article dans une revue hal-04320453v1
Deposit thumbnail

Metamaterial boat fenders with supreme shape recovery and energy absorption/dissipation via FFF 4D printing

Mahdi Bodaghi , Naser Namvar , Armin Yousefi , Hadi Teymouri , Frédéric Demoly et al.

Smart Materials and Structures, 2023, 32 (9), pp.095028. ⟨10.1088/1361-665x/acedde⟩

Article dans une revue hal-05455064v1

Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing

S. Macrae Montgomery , Frédéric Demoly , Kun Zhou , H. Jerry Qi

Advanced Functional Materials, 2023, 33 (17), ⟨10.1002/adfm.202213252⟩

Article dans une revue hal-05455047v1

Computational design for 4D printing of topology optimized multi-material active composites

Darshan Athinarayanarao , Romaric Prod’hon , Dominique Chamoret , H. Jerry Qi , Mahdi Bodaghi et al.

npj Computational Materials, 2023, 9 (1), pp.1. ⟨10.1038/s41524-022-00962-w⟩

Article dans une revue hal-05108400v1
Deposit thumbnail

Design for multi-material 4D printing: Development of an algorithm for interlocking blocks assembly generation

Kheira Benyahia , Hichem Seriket , Romaric Prod'Hon , Samuel Gomes , Jean-Claude André et al.

Procedia CIRP, 2023, 119, pp.396-401. ⟨10.1016/j.procir.2023.02.144⟩

Article dans une revue hal-05455098v1

Influence of interlocking blocks assembly on the actuation time, shape change, and reversibility of voxel-based multi-material 4D structures

Kheira Benyahia , Samuel Gomes , Jean-Claude André , H Jerry Qi , Frédéric Demoly

Smart Materials and Structures, 2023, 32 (6), pp.065011. ⟨10.1088/1361-665X/acd092⟩

Article dans une revue hal-05455097v1

A knowledge recommendation approach in design for multi-material 4D printing based on semantic similarity vector space model and case-based reasoning

Saoussen Dimassi , Frédéric Demoly , Hadrien Belkebir , Christophe Cruz , Kyoung-Yun Kim et al.

Computers in Industry, 2023, 145, pp.103824. ⟨10.1016/j.compind.2022.103824⟩

Article dans une revue hal-05455076v1
Deposit thumbnail

Bio-inspired design, modeling, and 3D printing of lattice-based scale model scooter decks

Naser Namvar , Ilya Moloukzadeh , Ali Zolfagharian , Frédéric Demoly , Mahdi Bodaghi

International Journal of Advanced Manufacturing Technology, 2023, 126 (7-8), pp.2887-2903. ⟨10.1007/s00170-023-11185-8⟩

Article dans une revue hal-05455072v1

4D Printing of Freestanding Liquid Crystal Elastomers via Hybrid Additive Manufacturing

Xirui Peng , Shuai Wu , Xiaohao Sun , Liang Yue , S. Macrae Montgomery et al.

Advanced Materials, 2022, 34 (39), ⟨10.1002/adma.202204890⟩

Article dans une revue hal-05455037v1
Deposit thumbnail

An Assembly-Oriented Design Framework for Additive Manufacturing

Germain Sossou , Frédéric Demoly , Samuel Gomes , Ghislain Montavon

Designs, 2022, 6 (1), pp.20. ⟨10.3390/designs6010020⟩

Article dans une revue hal-05455077v1
Deposit thumbnail

4D Printed Multifunctional Composites with Tunable Shape Morphing

Devin Roach , Xiaohao Sun , Xirui Peng , Frédéric Demoly , Kun Zhou et al.

Advanced Functional Materials, 2022, 32 (36), pp.108074. ⟨10.1002/adfm.202203236⟩

Article dans une revue hal-05455045v1

Research strategy in 4D printing: Disruptive vs. incremental?

Frédéric Demoly , Jean-Claude André

Journal of Integrated Design and Process Science, 2022, 24 (2), pp.53-73. ⟨10.3233/JID200020⟩

Article dans une revue hal-03485234v1

Machine Learning‐Evolutionary Algorithm Enabled Design for 4D‐Printed Active Composite Structures

Xiaohao Sun , Liang Yue , Luxia Yu , Han Shao , Xirui Peng et al.

Advanced Functional Materials, 2022, 32 (10), ⟨10.1002/adfm.202109805⟩

Article dans une revue hal-05455030v1
Deposit thumbnail

A Multi-Part Production Planning Framework for Additive Manufacturing of Unrelated Parallel Fused Filament Fabrication 3D Printers

Thibaut Cadiou , Frédéric Demoly , Samuel Gomes

Designs, 2022, 6 (1), pp.11. ⟨10.3390/designs6010011⟩

Article dans une revue hal-05455109v1
Deposit thumbnail

Unstructured Direct Ink Write 3D Printing of Functional Structures with Ambient Temperature Curing Dual‐Network Thermoset Ink

Connor D. Armstrong , Liang Yue , Frédéric Demoly , Kun Zhou , H. Jerry Qi

Advanced Intelligent Systems, 2022, 5 (1), pp.2200226. ⟨10.1002/aisy.202200226⟩

Article dans une revue hal-05455032v1
Deposit thumbnail

Origami-Based Design for 4D Printing of 3D Support-Free Hollow Structures

Bingcong Jian , Frédéric Demoly , Yicha Zhang , H. Jerry Qi , Jean-Claude André et al.

Engineering, 2022, 12 (3), pp.70-82. ⟨10.1016/j.eng.2021.06.028⟩

Article dans une revue hal-05455058v1

A Biomimetic Design Method for 3D-Printed Lightweight Structures Using L-Systems and Parametric Optimization

Monzer Al Khalil , Hadrien Belkebir , Nadhir Lebaal , Frédéric Demoly , Sébastien Roth

Applied Sciences, 2022, 12 (11), pp.5530. ⟨10.3390/app12115530⟩

Article dans une revue hal-05008873v1

A computational design approach for multi-material 4D printing based on interlocking blocks assembly

Kheira Benyahia , Hichem Seriket , Romaric Prod’hon , Samuel Gomes , Jean-Claude André et al.

Additive Manufacturing, 2022, 58, pp.102993. ⟨10.1016/j.addma.2022.102993⟩

Article dans une revue hal-05455066v1

Interval Algebra and Region Connection Calculus for Ontological Spatiotemporal Assembly Product Motion Knowledge Representation

Md Tarique Hasan Khan , Frédéric Demoly , Kyoung Yun Kim

Journal of Integrated Design and Process Science, 2021, 24 (1), pp.67-84. ⟨10.3233/JID200008⟩

Article dans une revue hal-05455112v1
Deposit thumbnail

The status, barriers, challenges, and future in design for 4D printing

J.C. Andre , Frederic Demoly

Materials & Design, 2021, ⟨10.1016/j.matdes.2021.110193⟩

Article dans une revue hal-03485171v1

Impression 4D : Promesses ou futur opérationnel ?

Frederic Demoly , Jean-Claude André

Techniques de l'Ingénieur, 2021, ⟨10.51257/a-v1-re285⟩

Article dans une revue hal-03485199v1

Impression 4D : Une cécité de confort et/ou une approche systémique empêchée ?

Frédéric Demoly , Jean-Claude André

Entropie : thermodynamique – énergie – environnement – économie, 2021, 2 (1), ⟨10.21494/ISTE.OP.2021.0609⟩

Article dans une revue hal-03485145v1

Fabrication additive alimentaire : une approche systémique

Frederic Demoly , Jean-Claude André

La Lettre Techniques de l'Ingénieur. Risques Industriels et Environnement, 2021, ⟨10.51257/a-v1-f3100⟩

Article dans une revue hal-03485189v1

Is order creation through disorder in additive manufacturing possible?

Frédéric Demoly , Jean-Claude André

Cogent Engineering , 2021, 8 (1), pp.1889110. ⟨10.1080/23311916.2021.1889110⟩

Article dans une revue hal-03200028v1

A hybrid additive manufacturing platform based on fused filament fabrication and direct ink writing techniques for multi-material 3D printing

Thibaut Cadiou , Frédéric Demoly , Samuel Gomes

International Journal of Advanced Manufacturing Technology, 2021, 114 (11-12), pp.3551-3562. ⟨10.1007/s00170-021-06891-0⟩

Article dans une revue hal-05455068v1

Constructing assembly design model capable of capturing and sharing semantic dynamic motion information in heterogeneous CAD systems

Md Tarique Hasan Khan , Frédéric Demoly , Kyoung-Yun Kim

International Journal of Advanced Manufacturing Technology, 2020, 111 (3-4), pp.945-961. ⟨10.1007/s00170-020-06046-7⟩

Article dans une revue hal-05455083v1

Optimised lattice structure configuration for additive manufacturing

Nadhir Lebaal , Yicha Zhang , Frédéric Demoly , Sébastien Roth , Samuel Gomes et al.

CIRP Annals - Manufacturing Technology, 2019, 68 (1), pp.117-120. ⟨10.1016/j.cirp.2019.04.054⟩

Article dans une revue istex hal-02277055v1
Deposit thumbnail

Design for 4D printing: Modeling and computation of smart materials distributions

Germain Sossou , Frédéric Demoly , Hadrien Belkebir , H. Jerry Qi , Samuel Gomes et al.

Materials & Design, 2019, 181, pp.108074 -. ⟨10.1016/j.matdes.2019.108074⟩

Article dans une revue hal-03488205v1

Machine-learning based design of active composite structures for 4D printing

Craig Hamel , Devin Roach , Kevin Long , Frédéric Demoly , Martin Dunn et al.

Smart Materials and Structures, 2019, 28 (6), pp.065005. ⟨10.1088/1361-665X/ab1439⟩

Article dans une revue hal-05455038v1

Ontological engineering for supporting semantic reasoning in design: deriving models based on ontologies for supporting engineering design

Frédéric Demoly , Kyoung-Yun Kim , Imre Horváth

Journal of Engineering Design, 2019, 30 (10-12), pp.405 - 416. ⟨10.1080/09544828.2019.1633626⟩

Article dans une revue hal-05455075v1
Deposit thumbnail

An origami-based design approach to self-reconfigurable structures using 4D printing technology

Bingcong Jian , Frédéric Demoly , Yicha Zhang , Samuel Gomes

Procedia CIRP, 2019, 84, pp.159-164. ⟨10.1016/j.procir.2019.04.184⟩

Article dans une revue hal-05455086v1
Deposit thumbnail

Design for 4D printing: rapidly exploring the design space around smart materials

Germain Sossou , Frédéric Demoly , Ghislain Montavon , Samuel Gomes

Procedia CIRP, 2018, 70, pp.120-125. ⟨10.1016/j.procir.2018.02.032⟩

Article dans une revue hal-05455061v1
Deposit thumbnail

An additive manufacturing oriented design approach to mechanical assemblies

Germain Sossou , Frédéric Demoly , Ghislain Montavon , Samuel Gomes

Journal of Computational Design and Engineering, 2017, 5 (1), pp.3-18. ⟨10.1016/j.jcde.2017.11.005⟩

Article dans une revue hal-05455040v1

Formal ontology and CAD integration with macro parametric approach

Md Tarique Hasan Khan , Frédéric Demoly , Kyoung-Yun Kim

Computer-Aided Design and Applications, 2017, 14 (sup1), pp.24-32. ⟨10.1080/16864360.2017.1308078⟩

Article dans une revue hal-05455096v1

A theoretical framework for product relationships description over space and time in integrated design

Elise Gruhier , Frédéric Demoly , Kyoung-Yun Kim , Said Abboudi , Samuel Gomes

Journal of Engineering Design, 2016, 27 (4-6), pp.269-305. ⟨10.1080/09544828.2016.1144049⟩

Article dans une revue hal-05455084v1

A formal ontology-based spatiotemporal mereotopology for integrated product design and assembly sequence planning

Elise Gruhier , Frédéric Demoly , Olivier Dutartre , Said Abboudi , Samuel Gomes

Advanced Engineering Informatics, 2015, 29 (3), pp.495-512. ⟨10.1016/j.aei.2015.04.004⟩

Article dans une revue istex hal-05455050v1

Product relationships management enabler for concurrent engineering and product lifecycle management

Frédéric Demoly , Olivier Dutartre , Xiu-Tian Yan , Benoit Eynard , Dimitris Kiritsis et al.

Computers in Industry, 2013, 64 (7), pp.833-848. ⟨10.1016/j.compind.2013.05.004⟩

Article dans une revue hal-01997626v1

A mereotopological product relationship description approach for assembly oriented design

Frédéric Demoly , Aristeidis Matsokis , Dimitris Kiritsis

Robotics and Computer-Integrated Manufacturing, 2012, 28 (6), pp.681-693. ⟨10.1016/j.rcim.2012.03.003⟩

Article dans une revue hal-05455057v1
Deposit thumbnail

Integrated product relationships management: a model to enable concurrent product design and assembly sequence planning

Frédéric Demoly , Xiu-Tian Yan , Benoît Eynard , Samuel Gomes , Dimitris Kiritsis

Journal of Engineering Design, 2012, 23 (7), pp.544-561. ⟨10.1080/09544828.2011.629317⟩

Article dans une revue hal-05455053v1

An assembly oriented design framework for product structure engineering and assembly sequence planning

Frédéric Demoly , Xiu-Tian Yan , Benoît Eynard , Louis Rivest , Samuel Gomes

Robotics and Computer-Integrated Manufacturing, 2011, 27 (1), pp.33-46. ⟨10.1016/j.rcim.2010.05.010⟩

Article dans une revue istex hal-05455041v1
Deposit thumbnail

Geometric skeleton computation enabling concurrent product engineering and assembly sequence planning

Frédéric Demoly , Luis Toussaint , Benoît Eynard , Dimitris Kiritsis , Samuel Gomes

Computer-Aided Design, 2011, 43 (12), pp.1654-1673. ⟨10.1016/j.cad.2011.09.006⟩

Article dans une revue hal-05455046v1

Multiple viewpoint modelling framework enabling integrated product–process design

Frédéric Demoly , Davy Monticolo , Benoît Eynard , Louis Rivest , Samuel Gomes

International Journal on Interactive Design and Manufacturing, 2010, 4 (4), pp.269-280. ⟨10.1007/s12008-010-0107-3⟩

Article dans une revue hal-05455048v1

PLM-based approach for Assembly Process Engineering

Frédéric Demoly , Samuel Gomes , Benoit Eynard , Louis Rivest

International Journal of Manufacturing Research, 2010, 5 (4), pp.413. ⟨10.1504/IJMR.2010.035811⟩

Article dans une revue hal-05455073v1
Deposit thumbnail

Conception numérique de structures lattice par décomposition de domaine et réseau neuronal

Thomas Cadart , Thibaut Hirschler , Sébastien Roth , Frédéric Demoly , Slim Bahi et al.

19ème Colloque national S.Mart 2025, Groupement d'Intérêt Scientifique GIS S.Mart, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244910v1
Deposit thumbnail

Numerical investigations on the effect of contact between materials in multi-material topology optimization

Hailu Gebremedhen , Dominique Chamoret , Frédéric Demoly , Gaël Chevallier

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244958v1
Deposit thumbnail

L'Intelligence Artificielle Neuro-symbolique dans la Conception Accélérée pour l'Impression 4D : État, Défis et Perspectives

Oualid Bougzime , Christophe Cruz , Frédéric Demoly

Colloque S.Mart 2025, GIS S.Mart RAO, May 2025, Vogüé (Ardèche - France), France

Communication dans un congrès hal-05244947v1
Deposit thumbnail

Computational design of a large dataset of viscoelastic metastructures for inverse design in low-frequency vibration attenuation

Robin Turlin , Thibaut Hirschler , Mahdi Bodaghi , Frédéric Demoly

SPIE Smart Structures + Nondestructive Evaluation 2025, Mar 2025, Vancouver, Canada. pp.1343204, ⟨10.1117/12.3051444⟩

Communication dans un congrès hal-05066049v1
Deposit thumbnail

Towards a Multi-view and Multi-representation CAD Models System for Computational Design of Multi-material 4D Printed Structures

Hadrien Belkebir , Romaric Prod’hon , Sebti Foufou , Samuel Gomes , Frédéric Demoly

20th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2023, Montreal, QC, Canada. pp.287 - 297, ⟨10.1007/978-3-031-62578-7_27⟩

Communication dans un congrès hal-05037049v1
Deposit thumbnail

Une modélisation poutre enrichie des structures lattices en fabrication additive

Thomas Cadart , Thibaut Hirschler , Slim Bahi , Sébastien Roth , Frédéric Demoly et al.

16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France

Communication dans un congrès hal-04611059v1

Animation d'objets par l'impression 4D

Frédéric Demoly , Jean-Claude André

Drôles d'objets 2023, Laboratoire INTERPSY, May 2023, Nancy (France), France

Communication dans un congrès hal-04713891v1
Deposit thumbnail

Conception pour l'impression 4D multi-matériaux : Développement d'un algorithme pour la génération d'assemblages de blocs interlockés

Kheira Benyahia , Jean-Claude Andre , Samuel Gomes , Hichem Seriket , Frédéric Demoly

S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France

Communication dans un congrès hal-04278701v1
Deposit thumbnail

From Dispersed Knowledge to Ontology: A Proposal for Formalizing and Integrating 4D Printing in Design

Saoussen Dimassi , Frédéric Demoly , Christophe Cruz , Samuel Gomes

18th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2021, Curitiba, Brazil. pp.80-95, ⟨10.1007/978-3-030-94399-8_7⟩

Communication dans un congrès hal-04195244v1
Deposit thumbnail

Towards a Knowledge-Based Design Methodology for Modular Robotic System

Lucas Jimenez , Frédéric Demoly , Sihao Deng , Samuel Gomes

17th IFIP International Conference on Product Lifecycle Management (PLM), Jul 2020, Rapperswil, Switzerland. pp.50-58, ⟨10.1007/978-3-030-62807-9_5⟩

Communication dans un congrès hal-03753131v1
Deposit thumbnail

Towards an Approach to Link Knowledge and Prediction in Product Design

Bertrand Marconnet , Frédéric Demoly , Davy Monticolo , Samuel Gomes

12th IFIP International Conference on Product Lifecycle Management (PLM), Oct 2015, Doha, Qatar. pp.248-258, ⟨10.1007/978-3-319-33111-9_23⟩

Communication dans un congrès hal-01377448v1
Deposit thumbnail

Product Upgradability: Towards a Medical Analogy

Yannick Chapuis , Frédéric Demoly , Eric Coatanéa , Samuel Gomes

IFIP International Conference on Advances in Production Management Systems (APMS), Sep 2014, Ajaccio, France. pp.148-155, ⟨10.1007/978-3-662-44733-8_19⟩

Communication dans un congrès hal-01387175v1
Deposit thumbnail

Towards a Spatiotemporal Ontology-Based on Mereotopological Theory in Assembly-Oriented Design

Elise Gruhier , Frédéric Demoly , Olivier Dutartre , Said Abboudi , Samuel Gomes

IFIP International Conference on Advances in Production Management Systems (APMS), Sep 2014, Ajaccio, France. pp.225-232, ⟨10.1007/978-3-662-44739-0_28⟩

Communication dans un congrès hal-01388250v1
Deposit thumbnail

Proactive Engineering and PLM: Current Status and Research Challenges

Frédéric Demoly , Henk Jan Pels , Samuel Gomes

10th Product Lifecycle Management for Society (PLM), Jul 2013, Nantes, France. pp.170-181, ⟨10.1007/978-3-642-41501-2_18⟩

Communication dans un congrès hal-01461840v1
Deposit thumbnail

Towards a Knowledge-Intensive Framework for Top-Down Design Context Definition

Nicolas Petrazoller , Frédéric Demoly , Samuel Deniaud , Samuel Gomes

20th Advances in Production Management Systems (APMS), Sep 2013, State College, PA, United States. pp.210-218, ⟨10.1007/978-3-642-41266-0_26⟩

Communication dans un congrès hal-01452115v1
Deposit thumbnail

A Novel Framework for Technological Evolution within Product Architecture

Yannick Chapuis , Frédéric Demoly , Samuel Gomes

20th Advances in Production Management Systems (APMS), Sep 2013, State College, PA, United States. pp.219-226, ⟨10.1007/978-3-642-41266-0_27⟩

Communication dans un congrès hal-01452116v1
Deposit thumbnail

Towards an Harmonious and Integrated Management Approach for Lifecycle Planning

Frédéric Demoly , Samuel Deniaud , Samuel Gomes

19th Advances in Production Management Systems (APMS), Sep 2012, Rhodes, Greece. pp.208-215, ⟨10.1007/978-3-642-40361-3_27⟩

Communication dans un congrès hal-01470622v1
Deposit thumbnail

Mereotopological Description of Product-Process Information and Knowledge for PLM

Frédéric Demoly , Aristeidis Matsokis , Dimitris Kiritsis , Samuel Gomes

9th International Conference on Product Lifecycle Management (PLM), Jul 2012, Montreal, QC, Canada. pp.70-84, ⟨10.1007/978-3-642-35758-9_7⟩

Communication dans un congrès hal-01526125v1

3D stereolithography of polymer matrix composites

Frédéric Demoly , Jean-Claude André

Additive Manufacturing of Polymer-Based Composite Materials, Elsevier, pp.247-280, 2024, ⟨10.1016/B978-0-443-15917-6.00008-6⟩

Chapitre d'ouvrage hal-04772896v1

Towards a Knowledge-Based Design Methodology for Modular Robotic System

Lucas Jimenez , Frédéric Demoly , Sihao Deng , Samuel Gomes

IFIP International Conference on Product Lifecycle Management, Nov 2020, Rapperswil, Switzerland. 594, Springer International Publishing, pp.50-58, 2020, IFIP Advances in Information and Communication Technology, ⟨10.1007/978-3-030-62807-9_5⟩

Proceedings/Recueil des communications hal-05507908v1