CV de Jean-Max Redonnet

Jean-Max Redonnet

20

Documents

Publications

Publications

	A comprehensive method to optimize 3+2 axis end-milling of free-form surfaces with a toroidal cutter Jean-Max Redonnet , Marcel Mongeau , Guillaume Cohen , Mahfoud Herraz , Mohammed Sbihi International Journal of Advanced Manufacturing Technology, 2026, ⟨10.1007/s00170-026-18051-3⟩ Article dans une revue hal-05638069v1
	Blackbox optimization and surrogate models for machining free-form surfaces Mahfoud Herraz , Jean-Max Redonnet , Mohammed Sbihi , Marcel Mongeau Computers & Industrial Engineering, 2023, 177, pp.109029. ⟨10.1016/j.cie.2023.109029⟩ Article dans une revue hal-03957204v1
	A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces Mahfoud Herraz , Jean-Max Redonnet , Marcel Mongeau , Mohammed Sbihi International Journal of Advanced Manufacturing Technology, 2020, 111 (5-6), pp.1425-1443. ⟨10.1007/s00170-020-06087-y⟩ Article dans une revue hal-02981692v1
	Strengthening of a curved composite beam by introducing a flat portion Sylvain Arki , Jean-François Ferrero , Steven Marguet , Jean-Max Redonnet , Alexandre Aury Composite Structures, 2019, 222, pp.110863. ⟨10.1016/j.compstruct.2019.04.035⟩ Article dans une revue hal-03331224v1
	An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter Stéphane Segonds , Philippe Seitier , Cyril Bordreuil , Florian Bugarin , Walter Rubio et al. Journal of Intelligent Manufacturing, 2017, ⟨10.1007/s10845-017-1360-0⟩ Article dans une revue hal-01826032v1
	Optimisation of free-form surface machining using parallel planes strategy and torus milling cutter Jean-Max Redonnet , Alejandro Gamboa Vázquez , Alberto Traslosheros Michel , Stéphane Segonds Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 232 (2), pp.240-250. ⟨10.1177/0954405416640175⟩ Article dans une revue hal-01913381v1
	Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling S. Djebali , Stéphane Segonds , Jean-Max Redonnet , Walter Rubio International Journal of Production Research, 2015, 53 (17), pp.5296--5309 Article dans une revue hal-01951244v1
	Milling plan optimization with an emergent problem solving approach Sonia Djebali , Alexandre Perles , Sylvain Lemouzy , Stéphane Segonds , Walter Rubio et al. Computers & Industrial Engineering, 2015, 87, pp.506-517. ⟨10.1016/j.cie.2015.05.025⟩ Article dans une revue hal-03832286v1
	Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter Jean-Max Redonnet , Sonia Djebali , Stéphane Segonds , Johanna Senatore , Walter Rubio Computer-Aided Design, 2013, 45 (6), pp.951-962. ⟨10.1016/j.ad.2013.03.002⟩ Article dans une revue hal-01244681v1
	Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory Michel Mousseigne , Yann Landon , Sébastien Seguy , Gilles Dessein , Jean-Max Redonnet International Journal of Machine Tools and Manufacture, 2013, 65, pp.47-57. ⟨10.1016/j.ijmachtools.2012.10.001⟩ Article dans une revue hal-00944576v1
	Variability influence of machining context on tool tips wear estimation - Application to dry turning of 42CrMo4 steel Stéphane Segonds , Christian Bes , Frederic Monies , Jean-Max Redonnet International Journal of Manufacturing Research, 2013, 8 (3), pp.277 -- 295. ⟨10.1504/IJMR.2013.055244⟩ Article dans une revue hal-02180341v1
	Modelling and optimising the passage of tangency discontinuities in NC linear paths Xavier Pessoles , Jean-Max Redonnet , Stéphane Segonds , Michel Mousseigne International Journal of Advanced Manufacturing Technology, 2012, 58 (5-8), pp.631--642. ⟨10.1007/s00170-011-3426-z⟩ Article dans une revue istex hal-02185583v1
	Improving NC Milling Skills through Practise of Simulated Work Patrick Gilles , Jean-Max Redonnet , Pierre Lagarrigue , R. Beceril , Bernard Fraysse et al. Materials Science Forum, 2006, 526, pp.121-126. ⟨10.4028/www.scientific.net/MSF.526.121⟩ Article dans une revue hal-02124536v1
	Side milling of ruled surfaces: Optimum positioning of the milling cutter and calculation of interference Jean-Max Redonnet , Walter Rubio , Gilles Dessein International Journal of Advanced Manufacturing Technology, 1998, 14 (7), pp.459-465. ⟨10.1007/BF01351391⟩ Article dans une revue hal-01017618v1

	Analysis of clustering algorithms for by-zone machining of free-form surfaces Mahfoud Herraz , Jean-Max Redonnet , Marcel Mongeau , Mohammed Sbihi 2022 Pré-publication, Document de travail hal-03568407v1

	Toolpath planning optimization for end milling of free-form surfaces using a clustering algorithm Mahfoud Herraz , Jean-Max Redonnet , Mohammed Sbihi , Marcel Mongeau 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Procedia CIRP, 99, pp.139-144, 2021, ⟨10.1016/j.procir.2021.03.021⟩ Proceedings/Recueil des communications hal-03219828v1

	Semi-continous approach for the modelling of complex shaped thick composite parts Sylvain Arki , Steven Marguet , Jean-Max Redonnet , Jean-François Ferrero , Pablo Navarro et al. 2nd International conference on mechanics of composites, Jul 2016, Porto, Portugal Communication dans un congrès hal-01878155v1
	Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling S. Djebali , Stéphane Segonds , Jean-Max Redonnet , Walter Rubio World Congress on Engineering, 2013, London, United Kingdom Communication dans un congrès hal-02183340v1
	Dynamic model of CNC milling machines X. Pessoles , Yann Landon , Walter Rubio , Jean-Max Redonnet 3rd International Conference on Structural Analysis of Advanced Materials (ICSAAM), Tarbes, France, September 7-10, 2009, 2009, Tarbes, France Communication dans un congrès hal-02194353v1
	Improving NC milling skills through practise of simulated work Gilles Cohen , Jean-Max Redonnet , Pierre Lagarrigue , Raquel Becerril Ortega , Bernard Fraysse et al. Congreso Internacional de la Sociedad de Ingeniería de Fabricación, Sep 2005, Calatayud, Spain Communication dans un congrès hal-01817348v1

Chargement...