LAURENT BLERON

40
Documents

Publications

Publications

Image document

Towards Reciprocal Feedback Between Timber Architecture, Engineering, and Additive Manufacturing by Stratoconception®

Anwar Nehlawi , Victor Fréchard , Ahmed W Ismail , Gilles Duchanois , Julien Meyer et al.
World Conference on Timber Engineering 2025, Jun 2025, Brisbane, France. pp.4318-4327, ⟨10.52202/080513-0531⟩
Communication dans un congrès hal-05113326 v1
Image document

Effect Of Wood Drying On Axially Loaded Screws In Oak

Martin Pilon , Laurent Bléron
International Conference on Experimental Mechanics, Jul 2025, Bologna (ITALY), Italy
Communication dans un congrès hal-05157673 v1
Image document

Towards wood dust collection during robotic grooving

Y. Dong , A. Bouali , N. Mechbal , Laurent Bléron , Thibaut Raharijaona
IEEE 10th International Conference on Systems and Control (ICSC), Nov 2022, Marseille, France. pp.477-481, ⟨10.1109/ICSC57768.2022.9993943⟩
Communication dans un congrès hal-03889915 v1
Image document

La Stratoconception®: une méthode de fabrication additive au service de l'architecture bois

Victor Fréchard , Laurent Bléron , Julien Meyer , Franck Besançon , Gilles Duchanois
11e Forum International Bois Construction, nvbcom, Apr 2022, Epinal, France. pp.49-56
Communication dans un congrès hal-03659878 v1

Proposition d’une méthode de conception-fabrication pour l’architecture en bois. Application du procédé de Stratoconception®

Victor Fréchard , Laurent Bléron , Julien Meyer
10èmes Journées Annuelles du GDR3544 Sciences du Bois du 17 au 19 novembre 2021 à Montpellier, GDR3544 Sciences du bois, Nov 2021, Montpellier, France. pp.101-104
Communication dans un congrès hal-03873734 v1
Image document

Modélisation des propriétés mécaniques du bois à partir de la mesure de la pente de fil

Younes Faydi , Joffrey Viguier , Guillaume Pot , Vincent Daval , Robert Collet et al.
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444875 v1
Image document

Modélisation numérique du comportement hydromécanique du matériau bois. Application à la résistance en portance locale d'un assemblage par tige

Laurent Bleron , Mourad Khelifa , Mohammed El Ganaoui
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439833 v1
Image document

Simulation numérique du comportement thermo-hydro-mécanique des assemblages bois réalisés avec des organes métalliques

Laurent Bleron , Mourad Khelifa , Nerea Vila Loperena
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439054 v1
Image document

Apport de la mesure de pente de fil au classement mécanique des bois de structures

Arnaud Jehl , Laurent Bleron , Fabrice Meriaudeau , Rémy Marchal
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422542 v1
Image document

Etude de la compression transversale du lamellé-collé

Laurent Bleron , Jean-Marc Devillard , Eric Sauvignet , Lionel Cabaton
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03378321 v1
Image document

Effets cultivar et station sur les propriétés mécaniques de LVL et contreplaqués issus du déroulage de peupliers

Hafida El Haouzali , Laurent Bleron , Rémy Marchal , Jean-Claude Butaud , Fabrice Cottin
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03378310 v1
Image document

Calcul automatique du Knot Area Ratio appliqué au classement mécanique de sciages de Douglas et d’Epicéa français.

Guillaume Roblot , Laurent Bleron
CFM 2009 - 19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Communication dans un congrès hal-03378338 v1

Caractérisation mécanique et aptitude à l'usinage de LVL (Laminated Veneer Lumber) de chêne.

Rémy Marchal , Frédéric F. Mothe , Martino Negri , Laurent Bléron , Robert Collet
Conférence Internationale de Mécanique Avancée. CIMA'2004, Nov 2004, BOUMERDES, Algérie. 10 p
Communication dans un congrès hal-02832022 v1
Image document

Strength Characterization by Vibrational Analysis of Building Demolition Wood to Assess Reuse Potential

Odran Lemaitre , Laurent Bléron , Caroline Simon , Pierre-Jean Méausoone
Recycling, 2025, 10, ⟨10.3390/recycling10060204⟩
Article dans une revue hal-05348347 v1

Mechanical properties of laminated veneer lumber produced from ten cultivars of poplar

Hafida El Haouzali , Remy Marchal , Laurent Bleron , Jean-Claude Butaud
European Journal of Wood and Wood Products, 2020, 78, pp.715-722. ⟨10.1007/s00107-020-01546-5⟩
Article dans une revue hal-03120702 v1

Some properties of plywood produced from 10 cultivars of poplar

Hafida El Haouzali , Rémy Marchal , Laurent Bléron , Jean-Claude Butaud , Fatima Kifani-Sahban
International wood products journal, 2020, 11 (2), pp.101-106. ⟨10.1080/20426445.2020.1735729⟩
Article dans une revue hal-03120695 v1

Peeling of Poplar : Cultivars and Forest Stations Effect on Veneer Quality

Hafida El Haouzali , Remy Marchal , Laurent Bleron , Jean-Claude Butaud
Journal of Materials and Environmental Science , 2019, 10 (3), pp.244-253
Article dans une revue hal-03120710 v1
Image document

Modelling mechanical properties of spruce and Douglas fir timber by means of X-ray and grain angle measurements for strength grading purpose

Joffrey Viguier , Damien Bourreau , Jean-François Bocquet , Guillaume Pot , Laurent Bléron et al.
European Journal of Wood and Wood Products, 2017, 75 (4), pp.527-541. ⟨10.1007/s00107-016-1149-4⟩
Article dans une revue hal-01530963 v1

Predicting the beech wood decay and strength loss in-ground

Quentin Kleindienst , Arnaud Besserer , Marie-Laure Antoine , Christelle Perrin , Jean-François Bocquet et al.
International Biodeterioration & Biodegradation, 2017, 123, pp.96-105. ⟨10.1016/j.ibiod.2017.06.006⟩
Article dans une revue hal-03120712 v1

Reinforcement of dowel type connections

Damien Lathuilliere , Laurent Bléron , Thierry Descamps , Jean-François Bocquet
Construction and Building Materials, 2015, 97 (SI), pp.48-54. ⟨10.1016/j.conbuildmat.2015.05.088⟩
Article dans une revue istex hal-01599797 v1
Image document

Improving strength grading of lumber by grain angle measurement and mechanical modeling

Joffrey Viguier , Arnaud Jehl , Robert Collet , Laurent Bleron , Fabrice Meriaudeau
Wood Material Science and Engineering, 2015, pp.24. ⟨10.1080/17480272.2014.951071⟩
Article dans une revue hal-01063383 v1
Image document

Mechanical characterization of heat-treated ash wood in relation with structural timber standards

Simon Hannouz , Robert Collet , Jean-Claude Butaud , Laurent Bléron , Kévin Candelier
PRO LIGNO - Open Access Scientific Journal in the Field of Wood Engineering, 2015, 11 (2), pp.13
Article dans une revue hal-01162542 v1

Spreading of transverse compressive stresses in glued laminated timber

Damien Lathuilliere , Octavian Pop , Laurent Bléron , Frédéric Dubois , Fazia Fouchal et al.
European Journal of Wood and Wood Products, 2015, 73 (4), pp.475-484. ⟨10.1007/s00107-015-0922-0⟩
Article dans une revue hal-04840638 v1
Image document

Spreading of transverse compressive stresses in glued laminated timber

Damien Lathuilliere , Octavian Pop , Laurent Bléron , Frédéric Dubois , Fazia Fouchal et al.
European Journal of Wood and Wood Products, 2015, 73 (4), pp.475-484. ⟨10.1007/s00107-015-0922-0⟩
Article dans une revue hal-01599802 v1
Image document

Index of efficiency for strength-grading machines for solid wood

Guillaume Roblot , Laurent Bleron , Frédéric Mothe , Robert Collet
European Journal of Environmental and Civil Engineering, 2013, 17 (4), pp.263-269. ⟨10.1080/19648189.2013.783417⟩
Article dans une revue hal-00879742 v1
Image document

The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies

Anna Dupleix , Louis Denaud , Laurent Bléron , Rémy Marchal , Mark Hughes
European Journal of Wood and Wood Products, 2013, 71 (2), pp.163-171. ⟨10.1007/s00107-012-0656-1⟩
Article dans une revue hal-00844668 v2
Image document

Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments

Anna Dupleix , Sid' Ahmed Ould Ahmedou , Laurent Bléron , Fréderic Rossi , Mark Hughes
Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments, 2012, 67 (1), pp.53-58
Article dans une revue hal-00844587 v1
Image document

The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies

Anna Dupleix , Louis-Etienne Denaud , Laurent Bleron , Remy Marchal , Mark Hughes
European Journal of Wood and Wood Products, 2012, 71 (2), pp.163-171. ⟨10.1007/s00107-012-0656-1⟩
Article dans une revue hal-01303681 v1
Image document

Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency

Louis Denaud , Laurent Bleron , Florent Eyma , Rémy Marchal
European Journal of Wood and Wood Products, 2012, 70 (1-3), pp.253-261
Article dans une revue hal-00870601 v1
Image document

Experimental study of locally loaded timber in compression perpendicular to the grain

Laurent Bleron , Louis Denaud , Robert Collet , Rémy Marchal
European Journal of Environmental and Civil Engineering, 2011, 15 (3), pp.357-366
Article dans une revue hal-00874064 v1
Image document

A Method of Lathe Checks Measurement; SMOF device and its software

Bartosz Pałubicki , Rémy Marchal , Jean-Claude Butaud , Louis Denaud , Laurent Bleron et al.
European Journal of Wood and Wood Products, 2010, 68 (2), pp.151-159. ⟨10.1007/s00107-009-0360-y⟩
Article dans une revue hal-01231471 v1
Image document

A Method of Lathe Checks Measurement; SMOF device and its software

Bartosz Pałubicki , Rémy Marchal , Jean-Claude Butaud , Louis-Etienne Denaud , Laurent Bléron et al.
European Journal of Wood and Wood Products, 2009, 68 (2), pp.151-159. ⟨10.1007/s00107-009-0360-y⟩
Article dans une revue hal-00568245 v1

Cutting forces in wood machining - basics and applications in industrial processes. A review COST Action E35 2004-2008: wood machining - micromechanics and fracture

Remy Marchal , Frédéric Mothe , Louis-Etienne Denaud , Bernard Thibaut , Laurent Bleron
Holzforschung, 2009, 63 (2), pp.157-167. ⟨10.1515/HF.2009.014⟩
Article dans une revue istex hal-01032121 v1
Image document

Cutting Forces in basic and real life wood machining processes review, COST Action E35 2004-2008: Wood machining - Micromechanics and fracture

Rémy Marchal , Frederic Mothe , Louis-Etienne Denaud , Bernard Thibaut , Laurent Bleron
Holzforschung, 2009, 63 (2), pp.157-167
Article dans une revue hal-00876003 v1

Characteristic properties of embedding strength for the nailing of the gonfolio rose (Qualea rosea Aubl.)

Laurent Bleron , Gilles Duchanois , Bernard Thibaut
Holzforschung, 2008, 62 (1), pp.86-90. ⟨10.1515/HF.2008.013⟩
Article dans une revue istex hal-01032183 v1
Image document

Evaluation of the visual stress grading standard on French Spruce (Picea excelsa) and Douglas-fir (Pseudotsuga menziesii) sawn timber

Guillaume Roblot , Damien Coudegnat , Laurent Bleron , Robert Collet
Annals of Forest Science, 2008, 65 (8), 4p. ⟨10.1051/forest:2008071⟩
Article dans une revue hal-00879744 v1
Image document

Online control of wood peeling process: acoustical and vibratory measurements of lathe checks frequency

Louis Denaud , Laurent Bleron , Rémy Marchal
Annals of Forest Science, 2007, 64 (5), pp.569-575
Article dans une revue hal-00870606 v1

Stratoconception, an additive manufacturing process for timber architecture: challenges and opportunities

Victor Fréchard , Laurent Bléron , Julien Meyer , Franck Besançon , Gilles Duchanois
13th World Conference on Timber Engineering 2023, World Conference on Timber Engineering (WCTE 2023), pp.3708-3717, 2023, 978171387327. ⟨10.52202/069179-0482⟩
Proceedings/Recueil des communications hal-04135362 v1
Image document

Measuring green wood thermal properties to simulate veneer production by ir-heating

Anna Dupleix , Andrzej Kusiak , Remy Marchal , Laurent Bleron , Louis Etienne Denaud et al.
IUFRO Conference Division 5 Forest Products, Technical session 5.02.00, Jul 2012, Estoril, Portugal
Poster de conférence hal-02100456 v1