Access content directly

Laurent Tabourot

133
Documents

Presentation

Bienvenue !
Bienvenue !

Publications

Extending the operating limits and performances of centimetre-scale wind turbines through biomimicry

Aurélien Carré , Pierre Gasnier , Émile Roux , Laurent Tabourot
Applied Energy, 2022, 326, pp.119996. ⟨10.1016/j.apenergy.2022.119996⟩
Journal articles hal-03953735v1
Image document

Automatic control and dispatching of charging currents to a charging station for power-assisted bikes

Willy Magloire Nkounga , Mouhamadou Falilou Ndiaye , Oumar Cisse , Françoise Grandvaux , Laurent Tabourot et al.
Energy, 2022, 246, pp.123415. ⟨10.1016/j.energy.2022.123415⟩
Journal articles hal-03573819v1
Image document

Dependency of the Young's modulus to plastic strain in DP steels: A consequence of heterogeneity?

Ludovic Charleux , Laurent Tabourot , Emile Roux , Moustapha Issack Farah , Laurent Bizet et al.
Materials Today Communications, 2020, 24, pp.100972. ⟨10.1016/j.mtcomm.2020.100972⟩
Journal articles hal-02484566v1

High-Pressure Effect on Structural and Magnetic Properties of MnS

A. Khaldi , A. Gueddim , N. Bouarissa , L. Tabourot
Acta Physica Polonica A, 2020, 137 (4), pp.483-485. ⟨10.12693/APhysPolA.137.483⟩
Journal articles hal-03119400v1

Phase Transition and Mechanical Stability of InN Compound

A. Khaldi , N. Bouarissa , L. Tabourot
Acta Physica Polonica A, 2020, 137 (4), pp.480-482. ⟨10.12693/APhysPolA.137.480⟩
Journal articles hal-03119401v1
Image document

Influence of the material microstructural properties on a 3-point bending test

Ahmed Maati , Laurent Tabourot , Pascale Balland , Salim Belaid
Mechanics & Industry, 2020, 21 (5), pp.518. ⟨10.1051/meca/2020060⟩
Journal articles hal-02915257v1
Image document

Decision-making system for recommending and evaluating competences networks based on interaction data

Soumaya Yahiaoui , Christophe Courtin , Pierre Maret , Laurent Tabourot
Applied Network Science, 2019
Journal articles hal-02191132v1

Wire Breaks during EDM rouh cuts with non-sealed flushing conditions

Blanche Ouvrard , Nhat-Khoa Do , Ludovic Lafleur , Jules Dutrieux , Michel Ly et al.
EDM Today, 2019, pp.60-63
Journal articles hal-02077575v1

Phase transition, mechanical stability and optical response of MnSe: Pressure effect

Abdelghani Khaldi , Nadir Bouarissa , Hatem Ghodbane , Laurent Tabourot
Physica B: Condensed Matter, 2019, 553, pp.6-10
Journal articles hal-01994576v1

A Novel Constitutive Modelling for Spring Back Prediction in Sheet Metal Forming Processes

Maati Ahmed , Laurent Tabourot , Pascale Balland , El Hadj Ouakdi , Salim Belaid et al.
Computational Methods and Experimental Testing In Mechanical Engineering, inPress
Journal articles hal-02401939v1

Modelling of the thermomechanical behaviour of FCC metals under various conditions

Ahmed Maati , El Hadj Ouakdi , Laurent Tabourot , Pascale Balland , Mourad Demouche et al.
Annales de Chimie - Science des Matériaux, 2018, 42 (1), pp.115-127
Journal articles hal-02012686v1

Experimental characterization and microstructure linked modeling of mechanical behavior of ultra-thin aluminum foils used in packaging

Laurent Tabourot , Ludovic Charleux , Pascale Balland , Ndèye Awa Sène , Eskil Andreasson et al.
AIP Conference Proceedings, 2018
Journal articles hal-02402009v1

First-Principles Study of Pressure Dependence of Optical Spectra of MnS

Abdelghani Khaldi , Nadir Bouarissa , Laurent Tabourot
Journal of Superconductivity and Novel Magnetism, 2018, 31 (5), pp.1643-1647
Journal articles hal-02023704v1
Image document

Crystal plasticity and phenomenological approaches for the simulation of deformation behavior in thin copper alloy sheets

Francis Adzima , Tudor Balan , Pierre-Yves Manach , Nicolas Bonnet , Laurent Tabourot et al.
International Journal of Plasticity, 2017, 94, pp.171-191. ⟨10.1016/j.ijplas.2016.06.003⟩
Journal articles hal-01556107v1

Influence of heterogeneities introduced into the modelling of a ring compression test

Laurent Bizet , Ludovic Charleux , Pascale Balland , Laurent Tabourot
Archives of civil and mechanical engineering, 2017, 17 (2), pp.365-374. ⟨10.1016/j.acme.2016.11.002⟩
Journal articles hal-01422890v1

Comparative study of modelling efficiency regarding localization development

Laurent Tabourot , Ndèye Awa Sène , Pascale Balland , Nesrine Ksiksi , Ludovic Charleux et al.
AIP Conference Proceedings, 2017, pp.1896 / 160007
Journal articles hal-02402022v1

Zinc-Blende MnTe Under Pressure: Structural, Mechanical, and Optical Properties from Ab Initio Calculation

Abdelghani Khaldi , Hatem Ghodbane , Nadir Bouarissa , Saleh Daoud , Zahir Rouabah et al.
Journal of Superconductivity and Novel Magnetism, 2017, 30 (6), pp.1533-1538
Journal articles hal-02012690v1
Image document

Simulation of ultra-thin sheet metal forming using phenomenological and crystal plasticity models

Francis Adzima , Py Manach , Tudor Balan , Laurent Tabourot , Sébastien Toutain et al.
Journal of Physics: Conference Series, 2016, 734, pp.032069. ⟨10.1088/1742-6596/734/3/032069⟩
Journal articles hal-01940548v1

An original prediction of localisation during tensile and biaxial expansion tests on copper by the compartmentalized model

Ndéye Awa Sene , Pascale Balland , Laurent Tabourot , Mathieu Vautrot , Nesrine Ksiksi et al.
AIP Conference Proceedings, 2016, 1769 (1), pp.160010
Journal articles hal-01525174v1

Experimental and numerical investigation of a short, thin-walled steel tube incremental forming process

Jonathan Raujol-Veillé , Franck Tousaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland et al.
Journal of Manufacturing Processes, 2015, 19, pp.59-66. ⟨10.1016/j.jmapro.2015.03.008⟩
Journal articles hal-01275063v1

Young’s Modulus Determination: Influence of Microplasticity and Pseudo-Elasticity on Metal Forming

Pascale Balland , Laurent Tabourot , Laurent Bizet , Ndéye Awa Sene , Christophe Depres et al.
Key Engineering Materials, 2015, Continuum Constitutive Modelling and Scale Transition Modelling, 651-653, pp.598-603. ⟨10.4028/www.scientific.net/KEM.651-653.598⟩
Journal articles hal-01275087v1

Constitutive modelling effect on the numerical prediction of springback due to a stretch-bending test applied on titanium T40 alloy

Ahmed Maati , Laurent Tabourot , Balland Pascale , El Hadj Ouakdi , Mathieu Vautrot et al.
Archives of civil and mechanical engineering, 2015, 14 (4), pp.836-846. ⟨10.1016/j.acme.2015.05.009⟩
Journal articles hal-01275030v1

Numerical study on the influence of crystallographic texture and grain shape on the yield surface of textured aluminum sheet material.

Afaf Saai , Odd Sture Hopperstad , Stéphane Dumoulin , Laurent Tabourot
Materials Science Forum, 2014, 794-796, pp. 584-589. ⟨10.4028/www.scientific.net/MSF.794-796.584⟩
Journal articles hal-00999592v1

The practical use of an interactive visualisation and planning tool for intervention planning in particle accelerator environments with ionizing radiation Nuclear Inst.

Thomas Fabry , J. Blaha , Liesbeth Vanherpe , Christian Braesch , Laurent Tabourot et al.
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2014, pp.NC. ⟨10.1016/j.nima.2013.12.051⟩
Journal articles hal-00927382v1

Augmented reality aiding collimator exchange at the LHC

Héctor Martínez , Thomas Fabry , Seppo Laukkanen , Jouni Mattilac , Laurent Tabourot et al.
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2014, 763, pp.354-363. ⟨10.1016/j.nima.2014.06.037⟩
Journal articles hal-01275132v1

Numerical study of the impact of constitutive modelling on the evolution of necking in the case of a tensile test on C68 grade steel.

Laurent Tabourot , Pascale Balland , Ndèye Awa Sène , Mathieu Vautrot , Nesrine Ksiksi et al.
Key Engineering Materials, 2014, 611-612, pp. 521-528
Journal articles hal-00989762v1

Lean and PLM: two complementary pillars for enterprise agility.

Muriel Pinel , Christian Braesch , Magali Pralus , Laurent Tabourot , Pierre Bonnal et al.
The Journal of Modern Project Management, 2013, 1 (1), p.70-85
Journal articles hal-01270918v1

Numerical simulation of springback during an operation of V-bending, application to titanium and aluminum sheets.

Ahmed Maati , Virginie Pouzols , Laurent Tabourot , Pascale Balland , E.H. Ouakdi et al.
Advanced Materials Research, 2013, 698, pp. 69-78
Journal articles hal-00926982v1

Experimental technique to characterize the plastic behaviour of metallic materials in a wide range of temperatures and strain rates: Application to a high-carbon steel.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
Experimental Mechanics, 2013, pp.NC
Journal articles hal-00927094v1

Characterization and modeling of the elastic behavior of a XC68 grade steel used at high strain rates and high temperatures

Laurent Tabourot , Pascale Balland , Mathieu Vautrot , Odd Sture Hopperstad , Jonathan Raujol-Veillé et al.
Key Engineering Materials, 2013, 554-557, pp. 1116-1124. ⟨10.4028/www.scientific.net/KEM.554-557.1116⟩
Journal articles hal-00819853v1

An investigation of the mechanics of roller burnnishing through finite element simulation and experiments.

Pascale Balland , Laurent Tabourot , Fabien Degré , Vincent Moreau
International Journal of Machine Tools and Manufacture, 2013, 65, pp. 29-36. ⟨10.1016/j.ijmachtools.2012.09.002⟩
Journal articles hal-00790837v1

Lean and PLM: Two complementary pillars for enterprise agility.

Muriel Pinel , Christian Braesch , Laurent Tabourot , Pierre Bonnal
The Journal of Modern Project Management, 2013, 1, pp. 67-82
Journal articles hal-00921196v1

Compartmentalized model for the mechanical behavior of titanium.

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Christophe Déprés et al.
Key Engineering Materials, 2012, 504-506, pp. 673-678. ⟨10.4028/www.scientific.net/KEM.504-506.673⟩
Journal articles hal-00730493v1

Mechanics of the burnishing process.

Pascale Balland , Laurent Tabourot , Fabien Degré , Vincent Moreau
Precision Engineering, 2012, pp.NC
Journal articles hal-00730484v1

Compartmentalized Model for the Mechanical Behavior of Titanium

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Christophe Déprés et al.
Key Engineering Materials, 2012, 504-506, pp.673-678
Journal articles hal-02004622v1

Characterization of high carbon steel C68 at elevated temperatures and different strain rates.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
Technische Mechanik, 2012, 32, pp 577 - 586
Journal articles hal-00739478v1

Mechanics of the burnishing process.

Pascale Balland , Laurent Tabourot , Fabien Degré , Vincent Moreau
Journal of the International Societies for Precision Engineering and Nanotechnology, 2012, 37, pp. 129-134
Journal articles hal-00926913v1

Evaluation of springback under the effect of holding force and die radius in a stretch bending test.

E.H. Ouakdi , R. Louahdi , D. Khirani , Laurent Tabourot
Materials & Design, 2011, ⟨10.1016/j.matdes.2011.09.003⟩
Journal articles hal-00634885v1

Experimental and numerical study of the thermo-mechanical behavior of Al bi-crystal in tension using full field measurements and micromechanical modeling

Afaf As Saai , Hervé Louche , Laurent Tabourot , H.J. Chang
Mechanics of Materials, 2010, 42 (3), pp.275-292. ⟨10.1016/j.mechmat.2009.11.011⟩
Journal articles hal-00453914v1

Experimental study with a digital image correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium.

Franck Toussaint , Laurent Tabourot , Pierre Vacher
Archives of civil and mechanical engineering, 2008, 8, pp. 131-144
Journal articles hal-00710961v1

Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation

Franck Toussaint , Laurent Tabourot , Frédéric Ducher
Journal of Materials Processing Technology, 2008, 197 (1-3), pp. 10-16. ⟨10.1016/j.jmatprotec.2007.10.037⟩
Journal articles hal-00239019v1

Experimental study with a Digital Image Correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium

F. Toussaint , L. Tabourot , P. Vacher
Archives of civil and mechanical engineering, 2008, 8 (3), pp.131-143
Journal articles hal-02004619v1

A Dislocation Based Model for Low Amplitude Fatigue Behaviour of f.c.c. Single Crystals

Christophe Déprés , M. C. Fivel , Laurent Tabourot
Scripta Materialia, 2008, 155-156, pp.1105-1110. ⟨10.1016/j.scriptamat.2008.02.027⟩
Journal articles hal-00176936v1

Contribution of kinematic field measurements to the modelling of the Portevin-Le Chaâtelier effect by the image correlation method

Khaïdre Bouabdallah , Pascale Balland , Laurent Tabourot , Pierre Vacher
The Journal of Strain Analysis for Engineering Design, 2007, 42 (8), pp.589-594. ⟨10.1243/03093247JSA312⟩
Journal articles hal-00239187v1

Experimental study with a full-field measurement method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium

Franck Toussaint , Laurent Tabourot , Pierre Vacher
Journal of Materials Processing Technology, 2007
Journal articles hal-00332906v1

A fundamental model of aluminum single crystal behavior with physical description of kinematic work hardening

Afaf Saai , Laurent Tabourot , Christophe Déprés , Hervé Louche
Materials Science Forum, 2007, 550, pp. 577-582
Journal articles hal-00177775v1

Experimental Data on Aluminium Single Crystals Behaviour

Stéphane Dumoulin , Laurent Tabourot
Proceedings of the I MECH E Part C Journal of Mechanical Engineering Science, 2005, C11, pp.1159-1167. ⟨10.1243/095440605X32057⟩
Journal articles hal-00239191v1

Numerical determination of strain localisation during finite element simulation of deep-drawing operations

L. Tabourot , P. Vacher , T. Coudert , F. Toussaint , R. Arrieux et al.
Journal of Materials Processing Technology, 2005, 159 (2), pp.152-158
Journal articles hal-02004612v1

Numerical determination of strain localisation during finite element simulation of deep-drawing operations

Laurent Tabourot , Pierre Vacher , Térence Coudert , Franck Toussaint , Robert Arrieux et al.
Journal of Materials Processing Technology, 2005, 159 (2), pp.152-158. ⟨10.1016/j.jmatprotec.2004.04.413⟩
Journal articles hal-00258064v1

Modelling and analysis of a deep-drawing operation : key factors for successful comparisons between experimental and simulated results

Olga Incandela , Laurent Tabourot , Perine Porret , Pascale Balland , Robert Arrieux et al.
Journal of Materials Processing Technology, 2004, 155-156, pp. 1105-1110. ⟨10.1016/j.jmatprotec.2004.04.174⟩
Journal articles hal-00179356v1

Correction of geometrical defects of stamping parts by numerical simulation and design of experiment.

Eric Pairel , Yann Ledoux , Robert Arrieux , Laurent Tabourot , Olga Incandela et al.
Archives of civil and mechanical engineering, 2004, IV (4), pp. 75-86
Journal articles hal-02061021v1

Experimental energetic balance associated to the deformation of an aluminum multicrystal and monocrystal sheet

Hervé Louche , Laurent Tabourot
Materials Science Forum, 2004, 467-470, pp.1395-1400
Journal articles hal-00179268v1

Correction of geometrical defects of stamping parts by numerical simulation and design of experiment.

Eric Pairel , Yann Ledoux , Robert Arrieux , Laurent Tabourot , Olga Incandela et al.
Archives of civil and mechanical engineering, 2004, IV (4), pp. 75-86
Journal articles hal-00179379v1

Determination of the equivalent stress-equivalent strain relation of a sample of copper in tensile loading

Stéphane Dumoulin , Laurent Tabourot , Cédric Chappuis , Pierre Vacher , Robert Arrieux et al.
Journal of Materials Processing Technology, 2003, 133 (1), pp.79-83. ⟨10.1016/S0924-0136(02)00247-9⟩
Journal articles hal-00179392v1

Determination of the equivalent stress–equivalent strain relationship of a copper sample under tensile loading

Stéphane Dumoulin , Laurent Tabourot , Christine Chappuis , Pierre Vacher , Robert Arrieux et al.
Journal of Materials Processing Technology, 2003, 133 (1-2), pp.79-83. ⟨10.1016/S0924-0136(02)00247-9⟩
Journal articles hal-00258215v1

An attempt for a unified description from dislocation dynamics to metallic plastic behaviour

Laurent Tabourot , Stéphane Dumoulin , Pascale Balland
Journal of Physics IV, 2001, 11, pp.Pr5 -111 Pr5 - 118
Journal articles hal-00179407v1

Comparison of physically based constitutive laws used for numerical simulations of plasticity of metals

Pascale Balland , Laurent Tabourot , Marc Fivel
Journal of physicx IV, 2000, 11, pp.Pr4-381 Pr4-388
Journal articles hal-00179431v1

Plastic instability for off-axes loading in deep-drawing operations

Trong Nguyen Nhat , Robert Arrieux , Pierre Vacher , Laurent Tabourot
Journal of Materials Processing Technology, 1998, 77 (1-3), pp.175-179. ⟨10.1016/S0924-0136(97)00415-9⟩
Journal articles hal-00239224v1

Analysis of a criterion of deep drawing operation capability for thin orthotropic sheets

Pierre Vacher , Robert Arrieux , Laurent Tabourot
Journal of Materials Processing Technology, 1998, 78 (1-3), pp.190-197. ⟨10.1016/S0924-0136(97)00486-X⟩
Journal articles hal-00239216v1

Identification through mesoscopic simulations of macroscopic parameters of physically based constitutive equations for the plastic behaviour of fcc single crystals

Marc Fivel , Laurent Tabourot , E. Rauch , G. Canova
Journal of Physics IV, 1998, 8, pp.Pr8. 151-Pr8 - 158
Journal articles hal-00179491v1

Materials science & engineering. A

Laurent Tabourot , M. C. Fivel , E. F. Rauch
Materials Science and Engineering: A, 1997, 234-236, pp.639-642. ⟨10.1016/S0921-5093(97)00353-5⟩
Journal articles hal-00239232v1

Plasticity of cristalline materials: from dislocations to continuum

Christophe Déprés , Ciprian Manole , Pascale Balland , Fabien Degré , Laurent Tabourot et al.
Ioan R. Ionescu, Patrick Franciosi, Salima Bouvier and Oana Cazacu. Plasticity of cristalline materials : from dislocations to continuum, Wiley-ISTE, Chapiter 3. Stress Distribution and Plasticity., 2011
Book sections hal-00599060v1
Image document

Identifying the scope of the implications of a Digital Transformation A formal approach to define the business dimensions involved

Melissa Liborio Zapata , Lamia Berrah , Laurent Tabourot
IEIM 2022 The 3rd International Conference on Industrial Engineering and Industrial Management, Jan 2022, Barcelone, Spain
Conference papers hal-03544876v1
Image document

Innovative blade shape for micro wind turbines

Aurélien Carré , Émile Roux , Laurent Tabourot , Pierre Gasnier
WPW 2022 - IEEE 2022 Wireless Power Week, Jul 2022, Bordeaux, France. pp.121-125, ⟨10.1109/WPW54272.2022.9854036⟩
Conference papers hal-03779695v1
Image document

Short-term Multi Horizons Forecasting of Solar Irradiation Based on Artificial Neural Network with Meteorological Data: Application in the North-west of Senegal

Willy Magloire Nkounga , Mouhamadou Falilou Ndiaye , Oumar Cisse , Momadou Bop , Françoise Grandvaux et al.
2021 Sixteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), May 2021, Monte-Carlo, France. pp.1-8, ⟨10.1109/EVER52347.2021.9456600⟩
Conference papers hal-03479555v1
Image document

Towards the Definition of an Impact Level Factor of SME Features Over Digital Transformation

Melissa Liborio Zapata , Lamia Berrah , Laurent Tabourot
APMS (Advances in Production Management Systems) 2020, Aug 2020, Novi Sad, Serbia. pp.123-130, ⟨10.1007/978-3-030-57993-7_15⟩
Conference papers hal-03108969v1
Image document

Is a digital transformation framework enough for manufacturing smart products? The case of Small and Medium Enterprises

Melissa Liborio Zapata , Lamia Berrah , Laurent Tabourot
International Conference on Industry 4.0 and Smart Manufacturing (ISM 2019), Nov 2019, Rende, Italy
Conference papers hal-02389603v1

About localization on plane strain test on bi-material specimen

Hai Anh Phung , Pascale Balland , Ndèye Awa Sène , Laurent Tabourot
ESAFORM 2019, May 2019, Vitoria-Gasteiz, Spain
Conference papers hal-02401921v1

Influence of the material microstructural properties on a 3 point bending test

Maati Ahmed , Laurent Tabourot , Pascale Balland , Salim Belaid
Colloque franco-roumain en hommage au Prof. Cristian Teodosiu, 24ème congrès français de mécanique, Aug 2019, Brest, France
Conference papers hal-02401907v1

Experimental design on bimaterial forming

Hai Anh Duc , Pascale Balland , Ndèye Awa Sène , Laurent Tabourot
24ème congrès français de mécanique, Aug 2019, Brest, France
Conference papers hal-02401896v1

Influence of the material microstructural properties on a 3-point bending test

Ahmed Maati , Laurent Tabourot , Pascale Balland , Salim Belaid
Colloque franco-roumain en hommage au Prof. Cristian Teodosiu, 24ème congrès français de mécanique, Aug 2019, Brest, France
Conference papers hal-03117571v1

Strain analysis during tensile test using digital image correlation (DIC)

Maati Ahmed , Salim Belaid , Pascale Balland , Laurent Tabourot
4th International Conference on Fracture Mechanics FRACT’4, Nov 2018, Chlef, Algeria
Conference papers hal-02023935v1

Comparison of samaras movement between free falls and constrained rotation, using high speed imaging and stereocorrelation

Aurélien Carré , Émile Roux , Laurent Tabourot , Pierre Vacher , Ludovic Charleux et al.
12th European Fluid Mechanics Conference, Sep 2018, Vienna, Austria
Conference papers hal-01813218v1

Experimental characterization and microstructure linked modeling of mechanical behavior of ultra-thin aluminum foils used in packaging

Laurent Tabourot , Ludovic Charleux , Pascale Balland , Ndèye Awa Sène , Eskil Andreasson et al.
THE 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING, 2018, Palermo, Italy
Conference papers hal-01994584v1

Comparative study of modelling efficiency regarding localization development

Laurent Tabourot , Ndèye Awa Sène , Pascale Balland , Nesrine Ksiksi , Ludovic Charleux et al.
20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2017, 2017, dublin, Ireland. pp.160007
Conference papers hal-02012688v1

Competences Network Based on Interaction Data for Recommendation and Evaluation Aims

Soumaya Yahiaoui , Christophe Courtin , Pierre Maret , Laurent Tabourot
Complex Network 2017, 2017, Lyon, France. pp.989-1001
Conference papers hal-01994599v1

A standard framework for mechatronics

Leonida Granon , Pascale Balland , Laurent Tabourot , El-Housseine El-Hamed
2017 International Conference on Research and Education in Mechatronics (REM), Sep 2017, Wolfenbuettel, France. pp.1-8
Conference papers hal-02012692v1

Evaluation du degré de mécatronicité d'un produit

Laurent Tabourot , Leonida Granon , Pascale Balland , El-Hamed El-Housseine
15e Colloque National AIP-Priméca, Apr 2017, La Plagne, France
Conference papers hal-01537974v1

Comparative study of phenomenological and CPFEM based modeling approaches in sheet metal forming: application to micro-forming process simulation

Francis Adzima , Tudor Balan , Pierre Yves Manach , Laurent Tabourot
International Conference on Plasticity, Damage, and Fracture (Plasticity 2016), Jan 2016, Hawaï, United States
Conference papers hal-03250480v1

Modélisations et simulations de la mise en forme d'un connecteur d'épaisseur ultra-mince par un processus multi-passes

Laurent Bizet , Laurent Tabourot , Pascale Balland
22ème congrès français de mécanique, Association Française de Mécanique, Aug 2015, Lyon, France
Conference papers hal-01275115v1

Influence of heterogeneities and of their distribution on the elastoplastic behaviour of metals,

Laurent Tabourot , Ahmed Maati , Pascale Balland , Mathieu Vautrot
International symposium on plasticity 2015, Jan 2015, Montego Bay, Jamaica
Conference papers hal-01127987v1

Détection de l'apparition de la localisation dans la simulation d'opérations de formage des tôles métalliques

Laurent Tabourot , Pascale Balland , Awa Sene N'Deye , Nesrine Ksiksi
22ème congrès français de mécanique, Association Française de Mécanique, Aug 2015, Lyon, France
Conference papers hal-01275109v1

Micro Formage de composants à partir de tôles ultra fines en alliages de cuivre

Francis Adzima , Tudor Balan , Pierre-Yves Manach , Laurent Tabourot , Jean-Luc Diot et al.
22ème congrès français de mécanique, Association Française de Mécanique, Aug 2015, Lyon, France
Conference papers hal-01275096v1

Numerical investigation of the modelling of elastic behaviour in a wiping-die bending process.

Mathieu Vautrot , Pascale Balland , Laurent Tabourot , Jean-Luc Diot , Ludovic Charleux et al.
IDDRG 2014, Jun 2014, Paris, France. pp.NC
Conference papers hal-00993300v1

Numerical study of the impact of constitutive modelling on the evolution of necking in the case of a tensile test on C68 grade steel.

Laurent Tabourot , Pascale Balland , Ndèye Awa Sène , Mathieu Vautrot , Nesrine Ksiksi et al.
Esaform 2014, May 2014, ESPOO, Finland. pp.NC
Conference papers hal-00989719v1

Prédiction de la localisation de la déformation du titane T40

Nesrine Ksiksi , Pascale Balland , Laurent Tabourot
Plasticité 2014, Apr 2014, Lyon, France
Conference papers hal-00993352v1

Mesure du module d'Young : influence de la micro-plasticité et de la pseudo-élasticité.

Laurent Bizet , Pascale Balland , Laurent Tabourot , Christophe Déprés
Plasticité 2014, Apr 2014, Lyon, France
Conference papers hal-00993346v1
Image document

Modélisation du comportement élasto-plastique des tôles par un modèle compartimenté

Laurent Tabourot , Pascale Balland , Laurent Bizet , Ahmed Maati , Virginie Pouzols et al.
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Conference papers hal-01717040v1

Characterization and modeling of the elastic behavior of a XC68 grade steel used at high strain rates and high temperatures.

Laurent Tabourot , Pascale Balland , Mathieu Vautrot , Odd Sture Hopperstad , Jonathan Raujol-Veillé et al.
ESAFORM 2013, 2013, AVEIRO, Portugal
Conference papers hal-00926836v1

Modélisation du comportement élasto-plastique des tôles par un modèle compartimenté.

Laurent Tabourot , Pascale Balland , Ahmed Maati , Virginie Pouzols
CSMA 2013, 11ème Colloque National en Calcul des Structures, May 2013, Giens, France. pp.NC
Conference papers hal-00926832v1

Mixed experimental and numerical study of steel ferrule forming by low-contact deformation process.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland et al.
ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, Jul 2012, Nantes, France
Conference papers hal-00795389v1

FIRST STEPS OF CRACK INITIATION AND PROPAGATION IN FATIGUE OF FCC CRYSTALS STUDIED BY DISLOCATION DYNAMICS

Christophe Depres , C. Déprés , G.V. Prasad Reddy , L. Tabourot , R. Sandhya et al.
11th Biennial Conference On Engineering Systems Design And Analysis, Jul 2012, Nantes, France. pp.297-307
Conference papers hal-00994424v1

Modelling and optimization of the mechanical properties of titanium alloys for sheet metal forming.

Brigitte Bacroix , Elisabeth Massoni , Marie-Jeanne Philippe , Laurent Tabourot , Lei Bao et al.
Plasticité 2012, Apr 2012, METZ, France
Conference papers hal-00739527v1
Image document

Operational framework based on modeling languages to support product repository implementation.

Muriel Pinel , Christian Braesch , Laurent Tabourot , Aline Berger
9th International Conference on Product Lifecycle Management (PLM), Jul 2012, Montreal, QC, Canada. pp.257-266, ⟨10.1007/978-3-642-35758-9_22⟩
Conference papers hal-00795398v1

Lean et PLM : deux piliers complémentaires à l'agilité de l'entreprise.

Muriel Pinel , Christian Braesch , Magali Pralus , Laurent Tabourot , Pierre Bonnal et al.
Conférence Internationale en gestion de projet de l'UQTR, Oct 2012, Trois Rivières, Canada. pp. NC
Conference papers hal-00753559v1

Compartmentalized model for the mechanical behavior of titanium.

Laurent Tabourot , Pascale Balland , Jonathan Raujol-Veillé , Mathieu Vautrot , Franck Toussaint et al.
ESAFORM 2012, Mar 2012, Germany. pp.NC
Conference papers hal-00794985v1

Simulation numérique d'un procédé de mise en forme par faible contact d'une virole acier.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland et al.
20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Conference papers hal-00632592v1

PLM and Lean: two complementary pillars for the company

Muriel Pinel , Lilia Gzara , Magali Pralus , Christian Braesch , Jean Bigeon et al.
IESM 2011, International Conference on Industrial Engineering and Systems Management, May 2011, Metz, France. pp.565-574
Conference papers hal-00598551v1

Simulation numérique d'un procédé de mise en forme par faible contact d'une virole acier.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland et al.
20ème Congrès Français de Mécanique (CFM2011), Aug 2011, Besançon, France. pp. NC
Conference papers hal-00739667v1

Steel C68 characterization in severe conditions of temperature and speed.

Mathieu Vautrot , Pascale Balland , Odd Sture Hopperstad , Laurent Tabourot , Jonathan Raujol-Veillé et al.
2nd International Conference on Material Modelling, Aug 2011, Paris, France
Conference papers hal-00632589v1

FE simulation of a steel thin-wall short-tube forming process.

Jonathan Raujol-Veillé , Franck Toussaint , Laurent Tabourot , Mathieu Vautrot , Pascale Balland et al.
ESAFORM 2011, Apr 2011, Belfast, Ireland. pp. 258-263, ⟨10.1063/1.3589525⟩
Conference papers hal-00599057v1

Physically based kinematic hardening modelling of single crystal.

Pascale Balland , Christophe Déprés , Rémi Billard , Laurent Tabourot
ESAFORM 2011, Apr 2011, Belfast, Ireland. pp. 91-96, ⟨10.1063/1.3589497⟩
Conference papers hal-00599058v1

A complete approach for industrial bending simulation

Virginie Pouzols , Laurent Tabourot , Pascale Balland
ECCM 2010, IV European Conference on Computational Mechanics, May 2010, Paris, France. pp
Conference papers hal-00599063v1

Projet OPTIMIST : Modélisation et OPTImisation de la MISe en Forme des Alliages de Titane

Brigitte Bacroix , N. Benmhenni , Salima Bouvier , R. Brenner , H. Haddadi et al.
Journées technologiques - Le titane et ses alliages, challenges actuels et futurs, May 2010, Nantes, France
Conference papers hal-00653698v1

Towards a unified vision of plasticity: Analysis of the stresses in dislocation microstructures and induced material modeling in industrial context.

Ciprian Manole , Pascale Balland , Fabien Degré , Virginie Pouzols , Laurent Tabourot et al.
4th ICACM - International Center for Applied Computational Mechanics - 2010, Jun 2010, Paris, France
Conference papers hal-00632585v1

A phenomenological study of bending

Virginie Pouzols , Laurent Tabourot , Pascale Balland
1st EPFL Doctoral Conference in Mechanics, Feb 2010, Lausanne, Switzerland. pp. 53-56
Conference papers hal-00599064v1

Caractérisation de l'effet PLC par des techniques de mesures de champs cinématiques et thermiques.

Khaidre Bouabdallah , Hervé Louche , Pierre Vacher , Pascale Balland , Laurent Tabourot et al.
19ème Congrès Français de Mécanique, Aug 2009, Marseille, France
Conference papers hal-00632602v1
Image document

Developement of a dislocation-based constitutive law for fcc crystal on a wide range of deformation amplitude

Ciprian Manole , Christophe Déprés , Laurent Tabourot
X International Conference on Computational Plasticity COMPLAS X, Sep 2009, Barcelona, France. p354
Conference papers hal-00528264v1

Development of a dislocation-based constitutive law for fcc crystals on a wide range of deformation amplitude.

Ciprian Manole , Christophe Déprés , Laurent Tabourot
ICSMA - 15, Aug 2009, DRESDEN, Germany
Conference papers hal-00739686v1

Smart device for mechanical characterization of materials

Pascale Balland , Laurent Tabourot , Fabien Degré
Mecatronics2008, 2008, France. pp.CD ROM
Conference papers hal-00388340v1

Mise en forme d'une instrumentation de correction des déformations scoliotiques

Franck Toussaint , Frédéric Ducher , Laurent Tabourot
18e congrès français de mécanique, Aug 2007, Grenoble, France
Conference papers hal-00239255v1
Image document

Identification des paramètres matériau à partir d'un essai hétérogène par mesures de champs

Pascale Balland , Laurent Tabourot , Olga Incandela , Christophe Déprés
8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France
Conference papers hal-01495626v1

A fundamental model of aluminium single crystal behaviour with the physical description of kinematic work-hardening

Afaf Saai , Christophe Déprés , Laurent Tabourot , Hervé Louche
International Symposium held to coincide with the retirement of Professor John Humphreys, Sep 2007, Manchester, United Kingdom
Conference papers hal-00239283v1

Identification de loi de comportement à partir d'un essai hétérogène

Olga Incandela , Laurent Tabourot , Pascale Balland , Christophe Déprés , Pierre Vacher et al.
Plasticité 2006, Mar 2006, Sevrier, France
Conference papers hal-00239271v1

Modèle physique de comportement micromécanique d'un monocristal CFC

Afaf Saai , Christophe Déprés , Laurent Tabourot , Hervé Louche
Approches multi-échelles en mécanique des matériaux Colloque National MECAMAT, Jan 2006, Aussois, France
Conference papers hal-00239281v1

Fiabilisation de calculs éléments finis : application à la mise en forme

Olga Incandela , Pascale Balland , Laurent Tabourot
Conférence des utilisateurs francophones d'Abaqus, Nov 2006, Paris, France
Conference papers hal-00239264v1

Simulation numérique de la mise en forme d'un matériel implantable de correction des déformations scoliotiques

Franck Toussaint , Frédérik Ducher , Laurent Tabourot
6ème journée technique Cetim : "Innovez dans les implants orthopédiques", Jun 2006, Saint Etienne, France
Conference papers hal-00653702v1

Caractérisation des bandes Portevin-Le Châtelier dans un alliage Al-Mg par la technique d'analyse d'images

Pascale Balland , Laurent Tabourot , Pierre Vacher , Khaidre Bouabdallah
7ème colloque International francophone, méthodes et Techniques Optiques pour l'Industrie, 2006, Mulhouse, France
Conference papers hal-00388356v1

Modèle physique de comportement micromécanique d'un monocristal CFC - Prise en compte de l'écrouissage cinématique

Afaf As Saai , Christophe Déprés , Laurent Tabourot , Hervé Louche
Plasticité 2006, Mar 2006, Sevrier, France
Conference papers hal-00239267v1

Identification de paramètres d'un modèle de plasticité à partir de mesures de champs

Frédérik Ducher , Franck Toussaint , Laurent Tabourot , Térence Coudert
17ème Congrès Français de Mécanique, Aug 2005, Troyes, France
Conference papers hal-00651753v1

Interbody fusion implants manufacturing: Experiments on a T40 titanium sheet in view of its multiscale modelling in case of metal forming operation

Thomas Gradel , Franck Toussaint , David Chapelle , Pascale Balland , Laurent Tabourot et al.
9th International Conference on The Mechanical Behaviour of Materials, 2003, Geneva, Switzerland
Conference papers hal-00651581v1

Mise en oeuvre d'un procédé ECAE sur des tôles métalliques

Franck Toussaint , Laurent Tabourot
Workshop "ECAE et Matériaux hyper-déformés", Dec 2002, Saint Martin d'Hères, France
Conference papers hal-00653713v1

Modelling kinematic hardening for dislocation based plasticity models

Laurent Tabourot , Fivel Marc , Pascale Balland , Hervé Louche , Franck Toussaint et al.
Colloque Franco-Russe "Physics and Mechanics of Large Plastic Strains", 2002, Saint Peterburg, Russia
Conference papers hal-00651677v1

Une nouvelle voie pour la conception des implants intervertébraux

Thomas Gradel , Laurent Tabourot , Robert Arrieux , Pascale Balland
40e Anniversaire du Laboratoire de Mécanique Appliquée R.Chaléat - 1er Colloque Interaction Modèle Expérience, Jul 2002, Besançon, France. pp.Pr11-69, ⟨10.1051/jp4:20020476⟩
Conference papers hal-00180222v1
Image document

Peer learning semester/module through project-based learning in mechatronics

Virginie Siret , Laurent Tabourot , Christine Galez , Marina Zingraf , Miruna Peris et al.
[0] Intellectual Output 4, Université Savoie Mont Blanc; Hochschule Kaiserslautern - University of Applied Sciences; Technical University of Cluj-Napoca. 2022
Reports hal-03788231v1
Image document

Handbook to implement peer-to-peer learning in engineering studies (using the example of mechatronics)

Marina Zingraf , Albert Meij , Gerd Bitsch , Julia Bogner , Virginie Siret et al.
[0] Intellectual Output 3, Hochschule Kaiserslautern - University of Applied Sciences; Université Savoie Mont Blanc; Technical University of Cluj-Napoca. 2022
Reports hal-03788210v1
Image document

Methodological framework for peer learning in mechatronics

Miruna Peris , Alexandru Oarcea , Sergiu Stan , Albert Meij , Virginie Siret et al.
[0] Intellectual Output 2, Technical University of Cluj-Napoca; Hochschule Kaiserslautern - University of Applied Sciences; Université Savoie Mont Blanc. 2022
Reports hal-03788133v1
Image document

Competency Portfolio Assessment guidelines

Marina Zingraf , Albert Meij , Christine Galez , Laurent Tabourot , Virginie Siret et al.
[0] Intellectual Output 5, Hochschule Kaiserslautern - University of Applied Sciences; Université Savoie Mont Blanc; Technical University of Cluj-Napoca. 2021
Reports hal-03788247v1
Image document

Mapping, scientific review on peer-to-peer learning in mechatronics

Dan Rusu , Alexandru Ianosi , Dan Stan , Christine Galez , Laurent Tabourot et al.
[0] Intellectual Output 1, Technical University of Cluj-Napoca; Université Savoie Mont blanc; Hochschule Kaiserslautern - University of Applied Sciences. 2020
Reports hal-03764548v1
Image document

Loi de comportement élastoviscoplastique du monocristal en grandes transformations

Laurent Tabourot
Mécanique [physics.med-ph]. Institut National Polytechnique de Grenoble - INPG, 1992. Français. ⟨NNT : ⟩
Theses tel-00177810v1
Image document

Vers une vision unifiée de la plasticité cristalline

Laurent Tabourot
Mécanique [physics.med-ph]. Université de Savoie, 2001
Habilitation à diriger des recherches tel-00178010v1