Loïc Daridon

99
Documents

Présentation

Professeur à l'Université de Montpellier

[LMGC/UMR 5508](http://www.lmgc.univ-montp2.fr/)  

Université de Montpellier – CC048
163 rue Auguste Broussonnet
34090 MONTPELLIER
France Tel : 0 467 149 651
Fax : 0 467 143 923
Email : loic.daridon@umontpellier.fr ### Thèmes de Recherche :

  • Fissuration et fragmentation à l'aide de modèle de zone cohésive.
  • Ecriture de loi de comportement dans le cadre de TPI.
  • Interaction Fluide-Structure pour les bateaux à foils.

Responsabilités :

  • Chef du projet ASV-Mobula de 2019 à 2021
  • Chef du département d’enseignement de Mécanique de la Faculté des Sciences de l’UM (de 2013 à 2019) : Responsabilité des équipes pédagogiques, techniques, administratives et financières du département. Le département compte 2 Biatss, 16 EC, 5 emplois temporaires (ATER, moniteurs), 10 vacataires qui interviennent dans deux parcours de licence et deux parcours de master, pour un total d’environ 530 étudiants inscrits dans nos Unités d’Enseignement.
  • Directeur du MIST depuis Septembre 2007.
  • Correspondant du Challenge course en cours pour la FDS en 2016.
  • Responsable du parcours CMI de septembre 2015 à 2016.
  • Responsable de la licence Science et Technique pour l’Ingénieur de 2005 à 2013
  • Responsable des stages pour le département de mécanique de la FDS 2004 à 2013
  • Responsable des stages et du recrutement pour le département M&I de polytech’ Montpellier de 2010 à 2013

Carrière :

  • 2020 : Conseillé scientifique après de la société Neocean
  • 2019/2021 : Accueil en délégation au CNRS.
  • Depuis 2004 : Professeur des universités en Mécanique du Solide à l’Université de Montpellier, – PEDR 2006-2010 – Passage PRCE en 2018.
  • 1994/2004 : Maître de Conférence en Mécanique du Solide à l’Université de Strasbourg – PEDR 2000-2004 – Passage 1ère Classe en 1998.
  • 2001/2003 : Délégation au CNRS à l’Institut de Mécanique des Fluides et des Solides de Strasbourg (UMR7507).
  • 1993/1994 : ATER en Mécanique du Solide et Calculs de Structures à l’Université de Lorraine.
  • 1990/1993 : Moniteur en Mathématiques pendant mon doctorat à l’Université de Lorraine

Formation :

  • 2003 : Habilitation à Diriger des Recherches à l’Université de STRASBOURG. IMFS .
    ÉTUDE DE L’ENDOMMAGEMENT DANS LES MATÉRIAUX MÉTALLIQUES ET POLYMÈRES
    Date de soutenance : le 18 Décembre 2003
  • 1990/1994 : Thèse de Doctorat en Mécanique à l’Université de METZ. LPMM
    MODÉLISATION DU PONT DE FIBRES LORS DU DÉLAMINAGE DES MATÉRIAUX COMPOSITES
    Date de soutenance : le 18 Février 1994
  • 1989/1990 : DEA de Mathématiques Appliquées à l’Université de METZ
  • 1987/1989 : Licence et Maîtrise de Mathématiques à l’Université de TOULOUSE
  • 1985/1987 : DEUG de Sciences à l’Université de BREST

Publications

6
6
5
5
5
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
35
21
11
6
6
5
4
3
3
2
1
1
1
39
28
20
14
12
11
10
9
7
7
7
6
6
5
5
5
5
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
7
2
3
3
2
5
5
9
5
7
3
9
3
4
6
7
7
3
4
1

Publications

Image document

A new methodology for the mechanical behavior analysis of polyvinyl chloride and recycled polyethylene terephthalate foams: Finite element model updating using mechanical field measurements

Joulia Salloum , Romain Léger , Hussein Chebbo , Loïc Daridon , Patrick Ienny
Journal of Sandwich Structures and Materials, 2024, 26 (1), pp. 73-93. ⟨10.1177/10996362231203207⟩
Article dans une revue hal-04225848 v1
Image document

A probabilistic model for fast-to-evaluate 2D crack path prediction in heterogeneous materials

Kathleen Pele , Jean Baccou , Loïc Daridon , Jacques Liandrat , Thibaut Le Gouic et al.
Journal of Theoretical, Computational and Applied Mechanics, 2023, Volume XV, pp.1-21. ⟨10.46298/jtcam.8322⟩
Article dans une revue hal-03295926 v4
Image document

Flapping wing propulsion: Comparison between discrete vortex method and other models

Thierry Faure , Kostia Roncin , B. Viaud , Théo Simonet , Loïc Daridon
Physics of Fluids, 2022, 34 (3), pp.034108. ⟨10.1063/5.0083158⟩
Article dans une revue hal-03601448 v1
Image document

A damage criterion based on energy balance for isotropic cohesive zone model

André Chrysochoos , Loïc Daridon , Mathieu Renouf
Journal of Theoretical, Computational and Applied Mechanics, 2022, Volume 2, pp.1-20. ⟨10.46298/jtcam.7056⟩
Article dans une revue hal-03098095 v5
Image document

Local adaptive refinement method applied to solid mechanics

Loïc Daridon , Eric Delaume , Yann Monerie , Frédéric Perales
Applied and Computational Mechanics, 2020, 14 (2), ⟨10.24132/acm.2020.570⟩
Article dans une revue hal-03053926 v1
Image document

A Thermomechanical Framework for Analysis of Microstructural Evolution: Application to Olivine Rocks at High Temperature

Benjamin Holtzman , André Chrysochoos , Loïc Daridon
Journal of Geophysical Research : Solid Earth, 2018, 123 (10), pp.8474-8507. ⟨10.1029/2018JB015613⟩
Article dans une revue hal-01897852 v1
Image document

Computing the elastic properties of sandstone submitted to progressive dissolution

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
International Journal of Rock Mechanics and Mining Sciences, 2017, 95, pp.16 - 25. ⟨10.1016/j.ijrmms.2016.12.015⟩
Article dans une revue hal-01502421 v1
Image document

Periodic homogenization for Kelvin-Voigt viscoelastic media with a Kelvin-Voigt viscoelastic interphase

Loïc Daridon , Christian Licht , Somsak Orankitjaroen , Stéphane Pagano
European Journal of Mechanics - A/Solids, 2016, 58, pp.163-171. ⟨10.1016/j.euromechsol.2015.12.007⟩
Article dans une revue hal-01282112 v1
Image document

Micromechanical-based criteria for the calibration of cohesive zone parameters

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
Journal of Computational and Applied Mathematics, 2013, 246, pp.206-214. ⟨10.1016/j.cam.2012.10.031⟩
Article dans une revue hal-00751385 v1
Image document

Vibration analysis techniques for detecting filler-matrix decohesion in composites

Stéphane Corn , Jean Sébastien Dupuy , Patrick Ienny , Loïc Daridon
Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2012, 22 (1), pp.77-90
Article dans une revue hal-00797606 v1
Image document

Artificial compliance inherent to the intrinsic cohesive zone models: criteria and application to planar meshes

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
International Journal of Fracture, 2012, 178, pp.71-83. ⟨10.1007/s10704-012-9734-y⟩
Article dans une revue hal-00714812 v1
Image document

Criteria on the artificial compliance inherent to the intrinsic cohesive zone

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
Comptes Rendus Mécanique, 2011, 339 (12), pp.789-795. ⟨10.1016/j.crme.2011.10.001⟩
Article dans une revue hal-00672818 v1
Image document

Influence of Dissipated Energy on Shear Band Spacing in HY100 Steel

Omar Oussouaddi , Loïc Daridon , Saïd Ahzi , André Chrysochoos
Journal of Engineering Materials and Technology, 2011, 133 (2), pp.021002. ⟨10.1115/1.4001592⟩
Article dans une revue hal-00832743 v1
Image document

Solving fracture problems using an asymptotic numerical method

Loïc Daridon , Bertrand Wattrisse , André Chrysochoos , Michel Potier-Ferry
Computers & Structures, 2011, 89, pp.476-484. ⟨10.1016/j.compstruc.2010.12.001⟩
Article dans une revue hal-00665582 v1
Image document

Simulation of the Taylor impact test and analysis of damage evolution using a nucleation and growth based approach

L. Campagne-Lambert , Loïc Daridon , Omar Oussouaddi , Saïd Ahzi , X. Sun
Modeling, Measurement and Control, 2008, 77 (3-4), pp.19-35
Article dans une revue hal-00591015 v1

Influence of dissipated energy on adiabatic shear band spacing: influence de l'énergie dissipée sur la formation des bandes de cisaillement adiabatique multiples

N. Ouadoudi , Omar Oussouaddi , Loïc Daridon , Saïd Ahzi , Andre Chrysochoos
Physical and Chemical News, 2008, 39 (1), pp.75-81
Article dans une revue hal-00322724 v1
Image document

Finite elements simulations of thin copper sheets blanking : study of blanking paramaters on sheared edge quality

C. Husson , J.P.M. Correia , Loïc Daridon , Saïd Ahzi
Journal of Materials Processing Technology, 2008, 199 (1-3), pp.74-83. ⟨10.1016/j.jmatprotec.2007.08.034⟩
Article dans une revue hal-00447196 v1

Finite element simulations of thin copper sheets blanking: study of blanking parameters on sheared edge quality

Christophe Husson , Joao Pedro de Magalhaes Correia , Loïc Daridon , Saïd Ahzi
Journal Materials Processing Technology, 2008, 199 ((1)), pp.694-700
Article dans une revue hal-00321020 v1
Image document

Thermodynamic investigation of yield-stress models for amorphous polymers

J Richeton , Said Ahzi , Loïc Daridon
Philosophical Magazine, 2007, 87 (24), pp.3629-3643. ⟨10.1080/14786430701381162⟩
Article dans une revue hal-00513838 v1
Image document

On the shear band spacing in stainless steel 304L

Omar Oussouaddi , Loïc Daridon , André Chrysochoos , Saïd Ahzi
Journal de Physique IV Proceedings, 2006, 134, pp.287-291. ⟨10.1051/jp4:2006134044⟩
Article dans une revue istex hal-00447205 v1
Image document

A physically-based and fully coupled model of elasto-plasticity and damage for dynamic failure in ductile metals

Omar Oussouaddi , L. Campagne , Loïc Daridon , Saïd Ahzi
Journal de Physique IV Proceedings, 2006, 134, pp.1189-1194. ⟨10.1051/jp4:2006134045⟩
Article dans une revue hal-00447201 v1
Image document

High-speed blanking of copper alloy sheets : material modeling at high rates of strain and numerical prediction of the effects of processing parameters

C. Husson , Saïd Ahzi , Loïc Daridon
Journal de Physique IV Proceedings, 2006, 134, pp.1189-1194. ⟨10.1051/jp4:2006134181⟩
Article dans une revue istex hal-00447199 v1
Image document

A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures

Julien Richeton , Saïd Ahzi , Loïc Daridon , Yves Rémond
Polymer, 2005, 46 (16), pp.6035-6043. ⟨10.1016/j.polymer.2005.05.079⟩
Article dans une revue istex hal-00447211 v1

Yield and post-yield modeling of amorphous polymers : application of the cooperative model for the hight strain rates

Julien Richeton , Saïd Ahzi , Loïc Daridon , Yves Rémond
Polymer Science Series A / Vysokomolekulyarnye Soedineniya, Ser. A., 2005, 47, pp.332-338
Article dans une revue hal-00447213 v1
Image document

Modelling and simulation of thin sheet blanking using damage and rupture criteria

Christophe Poizat , Laurence Lambert-Campagne , Loïc Daridon , Saïd Ahzi , Christophe Husson et al.
International Journal of Forming Processes, 2005, 8 (1), pp.29-47. ⟨10.3166/ijfp.8.29-47⟩
Article dans une revue hal-00447208 v1
Image document

Implémentation de la méthode asymptotique numérique dans CAST3M

Loïc Daridon , Thierry Charras
Revue Européenne des Éléments Finis, 2004, 13 (1-2), pp.165-176. ⟨10.3166/reef.13.165-176⟩
Article dans une revue hal-00447234 v1
Image document

Influence of the material constitutive models on the adiabatic shear band spacing: MTS, power law and Johnson-Cook models

Loïc Daridon , Omar Oussouaddi , Saïd Ahzi
International Journal of Solids and Structures, 2004, 41 (11-12), pp.3109-3124. ⟨10.1016/j.ijsolstr.2004.01.008⟩
Article dans une revue istex hal-00447233 v1
Image document

Modeling and simulation of dynamic failure in metals

Laurence Lambert-Campagne , Loïc Daridon , Saïd Ahzi
Journal de Physique IV Proceedings, 2003, 110, pp.147-152. ⟨10.1051/jp4:20020685⟩
Article dans une revue istex hal-00447237 v1
Image document

Application of the Mechanical Threshold Stress for the analysis of the shear band spacing in HY-100 steel

Omar Oussouaddi , Loïc Daridon , Saïd Ahzi , Driss Bouami
Revue de Mécanique Appliquée et Théorique, 2003, 1 (4), pp.239-252
Article dans une revue hal-00447254 v1
Image document

Continuum damage modeling for ductile metals under high strain rate deformation

Christophe Husson , Saïd Ahzi , Loïc Daridon , Thierry Courtin
Journal de Physique IV Proceedings, 2003, 110, pp.63-68. ⟨10.1051/jp4:20020671⟩
Article dans une revue istex hal-00447243 v1
Image document

Modeling of strain rates and temperature effect on the yield behavior of amorphous polymers

Julien Richeton , Saïd Ahzi , Loïc Daridon , Yves Rémond
Journal de Physique IV Proceedings, 2003, 110, pp.39-44. ⟨10.1051/jp4:20020667⟩
Article dans une revue istex hal-00447274 v1
Image document

Study of the direction of motion over an Eight pattern trajectory for a traction kite Full downwind

Julien Bernard-Lameau , Jérémy Loustau-Laguide , Kostia Roncin , Benjamin Chouvion , Loïc Daridon
19èmes Journées de l'Hydrodynamique, Nov 2024, Nantes, France
Communication dans un congrès hal-04788486 v1
Image document

Gestion de l'énergie à bord d'un drone marin : Convertisseur Buck-Boost entrelacé

Guillaume Pellecuer , Thierry Martiré , Loïc Daridon
5ème édition du Symposium de Génie Électrique ( SGE 2023 ), Laboratoire d'Électrotechnique et d'Électronique de Puissance - L2EP, Jul 2023, Lille, France
Communication dans un congrès hal-04156498 v1
Image document

Mechanical behavior of innovative sandwich materials

Joulia Salloum , Romain Léger , Loïc Daridon , Patrick Ienny
ECCM 20 - 20th European Conference on Composite Materials, Jun 2022, Lausanne, Switzerland
Communication dans un congrès hal-03716247 v1

Mechanical behavior of innovative sandwich materials

Joulia Salloum , Patrick Ienny , Romain Léger , Loïc Daridon
EMMC 18 - 18th European Mechanics of Materials Conference, Apr 2022, Oxford, United Kingdom
Communication dans un congrès hal-03637060 v1
Image document

Power Inter Cell Transformer Modelling for ASV Application

Guillaume Pellecuer , Thierry Martiré , Loïc Daridon
48th Annual Conference of the Industrial Electronics Society- IECON 2022 Conference, Oct 2022, Bruxelles, France. ⟨10.1109/IECON49645.2022.9968513⟩
Communication dans un congrès hal-03822881 v1

Comportement mécanique de matériaux sandwichs innovants

Joulia Salloum , Romain Léger , Loïc Daridon , Patrick Ienny
Congrès des Jeunes Chercheurs en Mécanique - Méca-J, Aug 2021, En Ligne, France
Communication dans un congrès hal-03467661 v1
Image document

Etude de l'efficience d'un systeme de propulsion maritime par foil oscillant souple

Théo Simonet , Kostia Roncin , Lionel Lapierre , Loïc Daridon
17èmes Journées de l'Hydrodynamique, Nov 2020, Cherbourg, France
Communication dans un congrès hal-03103310 v1

Étude de l'efficience d'un système de propulsion maritime par foil oscillant souple

Théo Simonet , Kostia Roncin , Lionel Lapierre , Loïc Daridon
Journée Bioinspiration & Services fondés sur la Nature, Nov 2020, Montpellier, France
Communication dans un congrès hal-02999782 v1
Image document

Modélisation de la prédiction de trajets de fissures sur la base de descripteurs morphologiques locaux : application à la génération de microstructures équivalentes dans les études du vieillissement des matériaux cimentaires

Kathleen Pele , Frédéric Perales , Jean Baccou , Thibaut Le Gouic , Jacques Liandrat et al.
4èmes Journées Matériaux Numériques, Jun 2019, Amboise, France
Communication dans un congrès hal-02456733 v1
Image document

Méthodes de machine learning pour la prédiction de trajets de fissures dans les matériaux cimentaires sur la base de descripteurs morphologiques locaux

Kathleen Pele , Frédéric Perales , Jean Baccou , Yann Monerie , Loïc Daridon et al.
14ème Colloque National en Calcul de Structures (CSMA 2019), May 2019, Giens, France
Communication dans un congrès hal-02456777 v1
Image document

Analyse comparative de trois méthodes performantes de simulation numérique de la fissuration

Kajetan Wojtacki , Loïc Daridon , Frédéric Dubois , Nicolas Moes , Yann Monerie
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, France
Communication dans un congrès hal-01899258 v1
Image document

Evolution du comportement mécanique d'un matériau modèle soumis à une dissolution progressive

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
3èmes Journées Matériaux Numériques, Jan 2017, Tours, France
Communication dans un congrès hal-02143438 v1
Image document

Local adaptive refinement method applied to Cohesive Zone Models for heterogeneous materials

Eric Delaume , Loïc Daridon , Yann Monerie , Frédéric Dubois , Frédéric Perales
Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures - CFRAC 2017, Jun 2017, Nantes, France
Communication dans un congrès hal-02141645 v1
Image document

Méthode de raffinement local adaptatif multi-niveaux pour la fissuration des matériaux hétérogènes

Eric Delaume , Loïc Daridon , Frédéric Dubois , Yann Monerie , Frédéric Perales
13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France
Communication dans un congrès hal-01899344 v1

Chemical degradation of a numerical material - application to Fontainebleau sandstone

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
European Mechanics of Materials Conference (EMMC15), Sep 2016, Bruxelles, Belgium
Communication dans un congrès hal-01511172 v1

Local adaptive refinement method for the fracture of heterogenous materials

Eric Delaume , Loïc Daridon , Frédéric Dubois , Yann Monerie , Frédéric Perales
The Nuclear Materials Conference - NuMat2016, Nov 2016, Montpellier, France
Communication dans un congrès hal-02143705 v1
Image document

Local adaptive refinement method for the fracture of heterogeneous materials

Eric Delaume , Loïc Daridon , Frédéric Dubois , Yann Monerie , Frédéric Perales
24th International Congress of Theoretical and Applied Mechanics - ICTAM2016, Aug 2016, Montréal, Canada
Communication dans un congrès hal-02141656 v1
Image document

Toward a micromechanical identification of cohesive parameters

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
4th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures - CFRAC 2015, Jun 2015, Cachan, France
Communication dans un congrès hal-02142044 v1
Image document

Homogénéisation non linéaire d'un milieu `cohésif-volumique'. Critères pratiques pour la calibration des MZCs

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France
Communication dans un congrès hal-01706206 v1

La dégradation chimique d’un matériau modèle : une application pour le grès de Fontainebleau

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
Journées Matériaux Numériques, Feb 2015, Saint-Aignan-sur-Cher, France
Communication dans un congrès hal-01121867 v1

Chemical Degradation of a Numerically Genetared Material : Application to Fontainebleau Sandstone

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
7th International Conference on Porous Media and Annual InterPore Meeting, May 2015, Padoue, Italy
Communication dans un congrès hal-02142058 v1
Image document

Modélisation micromécanique de l'endommagement par approches cohésives : quelques aspects théoriques et numériques

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-03444894 v1
Image document

La dégradation chimique d'un matériau modèle : une application pour le grès de Fontainebleau

Kajetan Wojtacki , Loïc Daridon , Yann Monerie
12e Colloque National en Calcul des Structures , https://csma2015.ec-nantes.fr/index.php?page=index.php, May 2015, Giens, France
Communication dans un congrès hal-01289415 v1
Image document

Méthode de raffinement local adaptatif multi-niveaux pour la fissuration de matériaux

Eric Delaume , Loïc Daridon , Frédéric Dubois , Frédéric Perales
Congrès Français de Mécanique, Aug 2015, Lyon, France
Communication dans un congrès hal-02143781 v1

Local adaptive refinement and multilevel method for the fracture of heterogeneous materials

Eric Delaume , Loïc Daridon , Frédéric Dubois , Yann Monerie , Frédéric Perales
Workshop MIST : Friction, Fracture, Failure [Microstructural Effects], Oct 2015, Montpellier, France
Communication dans un congrès hal-02143515 v1

Cohesive Zone Models identification using an inverse homogenization method

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
Multiscale Analysis of the Impact of the Microstructure on Plasticity and Fracture in Interface-Dominated Materials, Grenoble Institute of Technology and the belgian IAP (Interuniversity Attraction Poles) network INTEMATE, Oct 2015, Houffalize, Belgium
Communication dans un congrès hal-02141680 v1

Application de la MAN à la fissuration à l'aide de modèles de zone cohésive

Loïc Daridon , Bertrand Wattrisse , André Chrysochoos
Journée Thématique : Méthode Asymptotique Numérique, May 2014, Lorient, France
Communication dans un congrès hal-01103147 v1

Microstructure reconstruction of sandsone and limestone by grains deposit -application for CO 2 geological storage

Kajetan Wojtacki , Loïc Daridon , Philippe Gouze , Yann Monerie
14th European Mechanics of Materials Conference - EMMC14, Aug 2014, Gothembourg, Sweden
Communication dans un congrès hal-01103163 v1
Image document

A micromechanical-based model for the ductile cohesive-volumetric damage

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
3rd International workshop on physics based material models and experimental observations, Jun 2014, Izmir, Turkey
Communication dans un congrès hal-01009642 v1
Image document

Prediction of damage evolution in bonded material using cohesive zone model

André Chrysochoos , Loïc Daridon , Bertrand Wattrisse
11th World Congress on Computational Mechanics - 5th European Conference on Computational Mechanics, Jul 2014, Barcelone, Spain
Communication dans un congrès hal-01103157 v1

Modélisation micromécanique de l’endommagement d’un milieu cohesif-volumique ductile

Nawfal Blal , Loïc Daridon , Yann Monerie
Matériaux 2014, Nov 2014, Montpellier, France
Communication dans un congrès hal-02142084 v1

Imagerie thermomécanique et changements d'échelles pour l'identification de modèles de zones cohésives

Nawfal Blal , André Chrysochoos , Loïc Daridon , Yann Monerie , Stéphane Pagano et al.
11ème colloque national en calcul des structures, CSMA2013, May 2013, Giens, France
Communication dans un congrès hal-00833329 v1
Image document

Comportement effectif d'un milieu cohésif : approche micromécanique

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
CFM 2013 - 21ème Congrès Français de Mécanique, Aug 2013, Bordeaux, France
Communication dans un congrès hal-03439745 v1
Image document

Comportement effectif d'un milieu cohésif : approche micromécanique

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
11e colloque national en calcul des structures, CSMA, May 2013, Giens, France
Communication dans un congrès hal-01717039 v1

Overall elastoplastic behaviour of a cohesive medium

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Jun 2013, Prague, Czech Republic
Communication dans un congrès hal-00799663 v1

A thermo-mechanical framework for analysis of grain size evolution during high temperature creep

Benjamin Holtzman , André Chrysochoos , Loïc Daridon
AGU Fall Meeting, Dec 2013, San Francisco, United States
Communication dans un congrès hal-02057357 v1
Image document

Some Numerical and Mechanical Issues When Using Intrinsic Cohesive Approaches

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
European Solid Mechanics Conference (ESMC), Jul 2012, Austria
Communication dans un congrès hal-00665936 v1
Image document

Application de la méthode asymptotique numérique au cas des modèles de zone cohésive

Loïc Daridon , Bertrand Wattrisse , André Chrysochoos , M. Potier-Ferry
CFM 2011 - 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France
Communication dans un congrès hal-03422644 v1
Image document

On mesh size to cohesive zone parameters relationships

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
ACOMEN 2011, Nov 2011, Liège, Belgium. pp.Cd-Rom
Communication dans un congrès hal-00800456 v1
Image document

Modèle micromécanique d'endommagement basé sur des approches cohésives : bornes et relations micro-macro

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
20ème Congrès Français de Mécanique, 2011, Besançon, France. pp.Clé USB
Communication dans un congrès hal-00628031 v1
Image document

Modèle micromécanique d'endommagement basé sur des approches cohésives

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00592873 v1
Image document

Changement d'échelles et zoom structural

Loïc Daridon , David Dureisseix , Sylvain Garcia , Stéphane Pagano
10e colloque national en calcul des structures, May 2011, Giens, France. pp.Clé USB
Communication dans un congrès hal-00596931 v1

Overall behavior of elastic materials with embedded cohesive zone models:rigorous bounds and mesh size-to-cohesive properties relationships

Nawfal Blal , Loïc Daridon , Yann Monerie , Stéphane Pagano
ESIS-TC Workshop on Numerical Methods for Materials Failure, 2011, France
Communication dans un congrès hal-00628017 v1

Mesoscale Analysis of dynamic loading and their physical consequences on a propellant: numerical and mechanical modelisations issues

Pierre Mateille , Loïc Daridon , Olivier Arnould , A. Fanget , G. Contesse
Groupe de travail MécaDymat - Journées 2009, 2009, Bourges, France. 7 p
Communication dans un congrès hal-00546272 v1

Mesoscale Analysis of dynamic loading and their physical consequences on a propellant: numerical and mechanical modelisations issues

Pierre Mateille , Loïc Daridon , Olivier Arnould , A. Fanget , G. Contesse
XI Khariton's Topical Scientific Readings International Conference: Extreme States of Substance. Det, 2009, Sarov, Russia
Communication dans un congrès hal-00447186 v1

Mesoscale Analysis of dynamic loading and their physical consequences on a propellant: numerical and mechanical modelisations issues

Pierre Mateille , Loïc Daridon , Olivier Arnould , A. Fanget , G. Contesse
9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading - DYMAT 2009, 2009, Bruxelles, Belgium
Communication dans un congrès hal-00546266 v1

Study of blanking parameters on sheared edge quality by finite elements simulation

S. Ahzi , C. Husson , J.P.M. Correia , Loïc Daridon
Shear 2007, 2007, Nancy, France
Communication dans un congrès hal-00574703 v1
Image document

Comparaison de méthodes dynamiques d'analyse du comportement mécanique de matériaux

Jean Sébastien Dupuy , P. Ienny , S. Corn , Loïc Daridon
CFM 2007 - 18ème Congrès Français de Mécanique, 2007, Grenoble, France
Communication dans un congrès hal-00574715 v1
Image document

Jonctions fortes entre deux solides: modèles simplifiés et algorithme

Anne-Laure Bessoud , Loïc Daridon , Françoise Krasucki
18èmeCongrès Français de Mécanique ( CFM07 ), Aug 2007, Grenoble, France. 6p
Communication dans un congrès hal-00574710 v1

Influence of dissipated energy on shear band spacing in HY100 steel

Saïd Ahzi , N. Ouadoudi , Omar Oussouaddi , Loïc Daridon , André Chrysochoos
Shear 2007, 2007, Nancy, France
Communication dans un congrès hal-00574706 v1

On the shear band spacing in stainless steel 304L

Omar Oussouaddi , Loïc Daridon , André Chrysochoos , S. Ahzi
8 th Eurodymat, 2006, Dijon, France
Communication dans un congrès hal-00574942 v1

Modeling of ductile behavior of metals under a wide range of loading rates : semi-empirical approach

C. Husson , S. Ahzi , Loïc Daridon
III European Conference on computational mechanics : solids, structures and coupled problems in engineering, 2006, Lisbon, Portugal. pp.CD-Rom
Communication dans un congrès hal-00574943 v1

A physically-based and fully coupled model of elasto-plasticity and damage for dynamic failure in ductile metals

Omar Oussouaddi , L. Campagne , Loïc Daridon , Saïd Ahzi
8th Eurodymat, 2006, Dijon, France. pp.293-298, ⟨10.1051/jp4:2006134045⟩
Communication dans un congrès hal-00574941 v1

High-speed blanking of copper alloy sheets : material modeling at high rates of strain and numerical prediction of the effects of processing parameters

C. Husson , S. Ahzi , Loïc Daridon
8 th Eurodymat, 2006, Dijon, France
Communication dans un congrès hal-00574939 v1
Image document

Travail des métaux en feuilles Simulation numérique 2D du découpage d'alliages de cuivre

Christophe Husson , Christophe Poizat , Loïc Daridon , Saïd Ahzi
7e colloque national en calcul des structures, CSMA, May 2005, Giens, France
Communication dans un congrès hal-01812963 v1

Plasticité et endommagement dynamique des métaux : application à la simulation de la découpe de tôles et à l'impact

S. Ahzi , L. Campagne , C. Husson , C. Poizat , Loïc Daridon
Colloque National MECAMAT, 2005, Aussois, France
Communication dans un congrès hal-00574993 v1
Image document

Travail des alliages de cuivre en feuilles : simulation et optimisation numérique 2D du procédé de découpe

Christophe Husson , Loïc Daridon , Saïd Ahzi
17e Congrès Français de Mécanique, Aug 2005, Troyes, France
Communication dans un congrès hal-00574986 v1

Numerical study of the effects of precessing parameters in the high-speed blanking in the connectic field

C. Husson , S. Ahzi , Loïc Daridon , C. Poizat
24th International Deep Drawing Research Group Congress, 2005, Besançon, France. 10p
Communication dans un congrès hal-00574983 v1
Image document

Modeling and simulation of dynamic failure in ductile metals

Laurence Lambert-Campagne , Loïc Daridon , Saïd Ahzi
S. Ahzi; M. Cherkaoui; i, M. A. Khaleel; H. M. Zbib; M. A. Zikry; B. Lamatina. IUTAM Symposium on Multiscale Modeling and Characterization of Elastic-Inelastic Behavior of Engineering Materials, 114, Springer, pp.413-420, 2004, Solid Mechanics and Its Applications, 978-1-4020-1861-9. ⟨10.1007/978-94-017-0483-0_50⟩
Chapitre d'ouvrage hal-00447232 v1
Image document

Une modélisation des ponts de fibres pour le délaminage des matériaux composites

Loïc Daridon
Sciences de l'ingénieur [physics]. Université Paul Verlaine - Metz, 1993. Français. ⟨NNT : 1994METZ070S⟩
Thèse tel-01776867 v1